Documente Academic
Documente Profesional
Documente Cultură
biz
NSPB
Metal-Enclosed,
Non-Segregated Phase Bus duct
CONTENTS
● Construction 4
● Standard components 5
● Dimensions 6
● Dimensions - Wall & Floor Flange Open 7
● Dimensions -Flange End 8
● Hanger 9
Description
2
LSIS has been producing global leading products in the industrial field of
electrical and electronical systems. NSPB is one of those to supply the
electrical energy with greater reliability and efficiency than power cables from
transformers to switchgear assemblies in power plants, substations and
important facilities.
Ratings
12 630~4000 12.5 ~ 50 28 75
3
Non-Segregated Phase Bus duct
Construction
Enclosures
�Standard materials for enclosures are mild steel and stainless steel.
Aluminum housings are also available upon request.
�The standard colors are Munsell No. 5Y 7/1 and 7.5BG 6/1.5, and
special colors are available upon request.
�Outdoor types are provided with heaters in �According to customer's requirements Air Shrinkable Tube and Heat
order to maintain electrical properties by Shrinkable Tube may be used to insulate the conductors. (Boots may
removing internal moisture. (Heaters for indoor be used to insulate the joints.)
are available upon request)
�Silver or Tin plateing is available for conductor surface.
Option �Epoxy Insulators are used to support the conductors. (Insulation barriers
are optional)
�Please specify the scope of supply for the
options such as Wall Busing and Flexible Bus �High tensile bolts are used to improve the contact pressure of the joint
Bar in the specification sheets. surfaces. (Stainless steel bolts are available upon request.)
4
Non-Segregated Phase Bus duct
NSPB System
NSPB Layout
Outoor / Indoor
Feeder
Horizontal Elbow
Flange
End Box
SWGR
Pipe Support
Vertical Elbow
With Flange End
SWGR
Standard components
Note) The standard components may be changed and special components may be used in accordance with the layout systems.
5
Non-Segregated Phase Bus duct
Dimensions
Note) 1. Please consult us for the specifications other than those listed above, including 4-
Wire system.
2. Above specifications are based on horizontal arrangement. The specifications for the
vertical are subject to change.
3. The above specifications are subject to change. Please contact us before application.
6
Non-Segregated Phase Bus duct
Dimensions - Wall & Floor Flange and Open
A + 200
100
H (Busduct)
B (Open)
B + 200
100
W (Busduct)
Rated Voltage Rated Current Enclosure Open Dimension (mm) Wall Open Dimensions (mm)
(kV) (A) W H A B
Note) 1. Please consult us for the specifications other than those listed above.
2. Please specify the scope of supply for the options such as Wall Busing in the specification sheets.
3. Anchor Bolts(5/16 Inch) are used to fix the Wall Flange.
7
Non-Segregated Phase Bus duct
Dimensions - Flange End
A A
25 C D D C 25 25 C C C C C 25
25
25
D
H (SWGR Open)
H (SWGR Open)
E
12-Ø14 16-Ø14
B
E
B
E
D
25
25
W (SWGR Open) W (SWGR Open)
Bolt
T
INCOMING
C
S
L Top
R
Front
SWGR Top View SWGR Side View
Rated Voltage Rated Current Enclosure Open Dimensions (mm) Dimensions (mm)
Fig
(kV) (A) W H A B C D E
Note) Above specifications are for 3-Wire system. Please consult us for the specifications other than those listed above, including 4-Wire system.
8
Non-Segregated Phase Bus duct
Hanger
Ceiling
Pipe connector
Busduct
Stud bolt
Clamp angle
Stud bolt
Note) 1. The Hanger Support are for indoor installation. The structure may change depending on the installation environment.
2. Special installation conditions require separate consultation.
3. Specify the scope of supply when ordering.
Clamp angle
Support channel
Stud bolt
Pipe connector
Note) 1. The Adjustable Pipe Support is for outdoor installation. Pipe Support in case of height of over 6m is replaced with Beam Support.
2. Special installation conditions require separate consultation.
3. Specify the scope of supply when ordering.
9
Non-Segregated Phase Bus duct
Memo
10
� For your safety, please read user's manual thoroughly before operating.
� Contact the nearest authorized service facility for examination, repair, or adjustment.
� Please contact a qualified service technician when you need maintenance.
Do not disassemble or repair by yourself!
Safety Instructions � Any maintenance and inspection shall be performed by the personnel having expertise concerned.
2012. 12 Metal-Enclosed, Non-Segregated Phase Bus duct (E) 2012. 12/(01) 2012. 12 Printed in Korea STAFF