Documente Academic
Documente Profesional
Documente Cultură
ASSIGNMENT PRESENTATION
By,
R Hariharan(14M224)
Guhan Koushik R D(15M222)
M.Mohamed Khizam(15M234)
Akhil Chand N (15M238)
Rohith R(15M249)
Satya Rahul J(15M252)
Barath Raman R (16M236)
TRUE POSITION
Definition:
• Describes the perfect (exact) location of
a point,
line, or
plane of a feature in relationship with a datum reference or other feature.
TRUE POSITION TOLERANCE
• The total permissible variation in the location of feature about its true
position.
• For cylindrical features- eg: holes, bosses etc.,
TPT – Diameter of the tolerance zone within which the axis of feature must
lie.
MERITS OF TRUE POSITION
Logical tolerance zone.
Eliminated-Cumulative errors of dimensions.
Not just dimensional offsets, the tilt or angular are measured.
Tolerance diameter
tanϴ= -------------------------------
width of plate
ZERO TRUE POSITION TOLERANCE
What is zero tolerance at MMC?
ZERO TRUE POSITION TOLERANCE
ZERO TOLERANCE AT MMC
ZERO TOLERANCE AT MMC
Dp = 0.517-0.501
= 0.506mm
Types of position tolerance
• H= 0.250 + O.020
FIXED FASTENER ASSEMBLY
• Fastener is restrained in one of the components of the assembly.
H=F+2T
H−F
T=
2
2T=14.4-14
T=0.2 mm
t1=0.2 mm and t2=0.2 mm
THANK YOU