Documente Academic
Documente Profesional
Documente Cultură
Dear reader,
Ponsse’s international service network consists of more than 170 service and spare parts
centres, and more than 500 maintenance experts. The network consists of Ponsse’s service
centres and those of Ponsse’s dealers and contractual service partners, maintenance vehicles
intended for field maintenance, and PONSSE Full Service projects.
The range of PONSSE services, spare parts and forest machine supplies is continuously being
increased and updated. The Service catalogue 2017 lists the most recent PONSSE service
products and spare parts, ranging from genuine, classic and remanufactured parts to forest
machine accessories and performance packages.
PONSSE service products are carefully selected and meet high quality requirements. For more
information about our products and their suitability, contact our skilled salespeople. Our service
centres also offer a wide variety of products that may not be included in the catalogue.
We are continuously developing our service network in order to serve our growing customer and
machine base as effectively as possible. The skilled and expert staff of our service centres make
sure that your machine operates in all conditions.
We wish you all the best at future logging sites.
Best regards,
PONSSE maintenance services
2
Table of Contents
Product line................................... 4
PONSSE Service............................. 8
Harvester Products....................... 94
Accessories.................................. 173
Chemicals.................................... 186
Stickers....................................... 197
Notes.......................................... 248
3
Harvesters
Forwarders
4
PRODUCT LINE
Forwarders
5
PONSSE ActiveFrame
Heads
PONSSE H5 PONSSE H6
Largest opening (feed rollers, mm) 530 (20.8 in) Largest opening (feed rollers, mm) 600 (23.6 in)
Cutting diameter, one pass (mm) 640 (25.2 in) Cutting diameter, one pass (mm) 640 (25.2 in)
Feed system 3 driving feed rollers Feed system 3 driving feed rollers
Feed force (kN) 19 (4,271 lbf) Feed force (kN) 25 (5,620 lbf)
Feed speed (m/s) 6 (19.7 ft/s) Feed speed (m/s) 6 (19.7 ft/s)
Starting weight, excl. rotator (kg) 900 (1,984 lbs) Starting weight, excl. rotator (kg) 1,050 (2,315 lbs)
6
PRODUCT LINE
Heads
Minimum weight Ergo 21,500 kg (47,399 lbs)
PONSSE H10
Minimum weight Buffalo 19,300 kg (42,549 lbs)
Largest opening (feeding rollers, mm) 895 (35.2 in)
Minimum weight Elephant 22,700 kg (50,045 lbs) Cutting diameter, one pass (mm) 950 (37.4 in)
Feed system 3 driving feed rollers
Minimum weight ElephantKing 23,600 kg (52,029 lbs) Feed force (kN) 43 (9,667 lbf)
Feed speed (m/s) max. 5.3 m/s (17 ft/s)
Typical weight Ergo 22,500 kg (49,604 lbs) at 90 gpm (340 l/min)
Starting weight, excl. rotator (kg) 2,600 (5,732 lbs)
Typical weight Buffalo 20,500 kg (45,194 lbs)
H10 is for track based machines over 25 tons.
Typical weight Elephant 23,500 kg (51,809 lbs)
Harvester cranes
Loaders
7
PONSSE Service
The Logger’s best friend invites you to the Logger´s Inn to enjoy the best
services for forest machinery ever provided. Our services extend from
authorized maintenance and training, and genuine parts and accesso-
ries, up to tailormade service agreement solutions, ensuring that you
always gain 100% value from your friendship with Ponsse.
8
PARTS
Genuine Parts • Accessories • Performance packages
• Remanufactured parts • Budget Parts • Classic Parts
SERVICE AGREEMENTS
PONSSE Active Care • PONSSE Active Care+
TECHNICAL SUPPORT
Field Service • Telephone Support
OPERATOR TRAINING
DOCUMENTS
Owner’s Manual - Parts Manuals
9
SPARE PARTS
The PONSSE spare parts selection is specifically designed for the
needs of machine entrepreneurs. We offer an extensive selection
of high-quality parts: PONSSE Genuine Parts, Accessories, Per-
formance Packages, Reman Parts, Budget Parts and Classic Parts
guarantee that your forest machine works efficiently. The compe-
tent personnel at our Service Centres will assist you in selecting
the right alternative for your needs. In case of an emergency, our
Service Centres also offer telephone assistance.
SPARE PARTS
One part, three options. Ponsse wants to offer The best quality at a competitive price – PONSSE
alternatives that meet customers’ needs. Genuine Accessories.
Parts, Remanufactured Parts and Budget Parts.
PONSSE Accessories
PONSSE Genuine Parts • The selection contains products that forest machine
• Original quality and reliability entrepreneurs need in their daily work.
• The best stock availability • Accessories, assortments and tools
• Carefully selected high-quality products
PONSSE Remanufactured Parts
• Based on recycling and reconditioning
• The same quality and warranty as with a new part Ready-made solutions at affordable package
• A more affordable alternative to a genuine part
prices – PONSSE Performance Packages.
• A quicker alternative to the traditional repair of parts
• Environmentally friendly
PONSSE Performance Packages
• Spare part sets and ready-made assemblies designed for vari-
PONSSE Budget Parts ous needs
• The most affordable option • An easy way to order new features and updates for machines
• Disused, second-hand or partially damaged parts • The package price is a less expensive option to ordering the
• The price is determined by the condition of the part parts separately
• No warranty
11
PONSSE ACTIVE CARE
RELIABILITY,
QUALITY, EFFECTIVITY
PONSSE Active Care service agreements comprise the best possible service for forest
machine entrepreneurs: you can focus on harvesting, while Ponsse takes care of
scheduled maintenance, machine optimisation and extended warranty.
Your forest machine will maintain its performance, reliabili- parts, lubricants and filters remains in good operating con-
ty and productivity from one logging site to the next. dition and retains its value.
With the PONSSE Active Care service agreement, you The PONSSE Active Care service agreement is avail-
can outsource the scheduled maintenance of your forest able with the additional PONSSE Active Care+ cover which
machine to Ponsse. Machines maintained regularly by pro- extends the warranty of machine parts, including all main
fessionals using only high-quality and original PONSSE components, computers and control modules.
12
1
RELIABILITY.
A defective machine in the middle of the woods may
cause extensive financial loss to forest machine en-
trepreneurs. The PONSSE service agreement ensures
that your equipment remains operable, so you can
stop worrying and concentrate on your work.
2
RESALE VALUE.
A regularly maintained machine remains in good
condition for a long time and retains its resale
value. When the machine’s operating and service
history is known, potential defects can be predict-
ed and any unnecessary replacement of compo-
nents can be avoided.
3
FIXED PRICES.
During the service agreement, you will save
5–10% since the prices remain the same through-
out the agreement period. There are no advance
fees because the work is only invoiced after com-
pleted maintenance.
PONSSE ACTIVE CARE SERVICE AGREEMENT ADDITIONAL PONSSE ACTIVE CARE+ COVER
You can add different kind of options for base machine, crane, loader, harvester head and Opti.
Ask more from nearest PONSSE sales.
13
TECHNICAL SUPPORT
When acquiring harvesting equipment from Ponsse, you are also
entitled to technical support. Our goal is to take into account the
local conditions and offer our services as close to you as possible.
We offer versatile support from our factory to the local service
centres in the form of training, among other services. The PONSSE
Service Centre, field maintenance and technical assistance will of-
fer you support whenever you need. If you like, you can outsource
the entire maintenance of your harvesting equipment to Ponsse.
TECHNICAL SUPPORT
Ponsse’s service centres, field maintenance and technical assistance offer fast and reliable
assistance in matters related to technical support. The global Ponsse maintenance network includes
approximately 170 service centres. Our maintenance network serves our customers with a high level of
professionalism, taking the local customer requirements into account.
15
OPERATOR TRAINING
When purchasing a new machine, Ponsse offers you extensive op-
erator training, and we will familiarise you with your new machine
in your own language. We use forest machine and servicing simula-
tors as an aid to our training.
OPERATOR TRAINING
Operator training is an integral part of each new PONSSE forest machine delivery.
The training ensures that operators know how to utilise the features of their new machines, work efficiently
and minimise operating costs. During operator training the customer will also learn valuable information
about preventive maintenance, machine upkeep and the scheduled maintenance programme.
Operator training for harvesters is divided into three parts and training for forwarders into two parts.
• Manuals and their contents • Automation settings and harvester • Measurements and maintenance
• Beginning and completing a work area head function according to work • Efficient working methods
and Opti’s display information phases • PONSSE EcoDrive
• Crane adjustment • Operator-, machine- and harvester • Working techniques and methods
• Automatic calibration of the harvester head-specific settings • Pressure measurements
head • Tips for economic driving: HST drive
and PONSSE EcoDrive
17
DOCUMENTS
Ponsse’s detailed Owner’s Manuals and Parts Manuals help you
find the information you need about the machine, its operation
and maintenance. Ponsse will deliver the manual for your machine
either as a hard copy or on a CD-ROM, in your own language. The
owner’s manuals will also be installed on your forest machine’s Opti
computer so that they will always be conveniently available, wher-
ever the machine is.
DOCUMENTS
Owner’s Manuals - Parts Manuals
You will always receive reliable and up-to-date documents with your PONSSE Harvesting Solution. The
experienced Ponsse Documentation personnel draft operator and maintenance manuals, as well as
parts manuals, in close cooperation with Technical Support and Product Development.
With a new forest machine, we offer Owner’s Manual Opti Information System Manual
operator and maintenance manuals and The PONSSE Opti Information system
parts manuals for the base machine, Owner’s Manuals for base machine, crane manual includes detailed information on
crane and harvester head. The machine and harvester head the features of the Opti Information system
delivery also includes a manual for the Opti The owner’s manuals include information applications in order to make their use as
information system. on how the forest machine works, how it easy and effective as possible. The manuals
can be safely used, its technical features are currently available in 20 languages.
The documents are machine-specific, i.e. and issues pertaining to the everyday
designed just for the machine purchased use and maintenance of the machine. Parts Manuals
by you. All documents are available as The manuals also include electronic and Your machine-specific parts manual can
hard copies or on a USB memory stick, hydraulic diagrams to assist in servicing. be used as an aid when you need parts for
and they are also available in the PONSSE The owner’s manuals are currently available servicing the machine. The manual includes
forest machine’s Opti computer. If you have in approximately twenty languages. assembly layout drawings, and thus it can
purchased a used machine or wish to obtain also be used when disassembling and
new documents for your machine, please assembling components. The parts manuals
contact your closest Service Centre. are currently available in eight languages.
Opti4G
4.603
s 1.3
ti on Login
uc
str 1. Click the
in icon for
ing the desired
riv driver.
4 D
l
tro
on
e c
an
Cr
4.8
2. Select the
menu. desired
program
UAL in the Op
ti4G
MAN program
ER’S
OWN
dle le
an 9)
l h hand (3 0)
tro ad
: itch h (3
on ntrol
W
ft c he l sw switc on.
ter .
ERGO 6
Le ht co es n tro
on head n bu
tt
A Rig arv ti o e c e
B th e h e Op cran ester d op
te h th the harv hea
tiva itc n r
Ac Sw itch o n the este
o rv
● Sw itch e ha
● Sw ss th
● Pre ut
● ns n o
tio nsio n in
nc t) NS
Fu Exte nsio ou
t gh NSTR
UCTIO
Ex
te m st) e ri ORIGI
NAL I
1 oo in d fa th
2 g b om ft an d to ft)
ffin bo low ere st) the le
Lu ing ne le ght (s ste
3 ff
Lu w cra ne ri w ard hine and fa d to friend
k
c mac low tee re best
4 Sle w cra ba s ge r’s
5 Sle ed ve, rd (s hine A log
r fe dri a c t
6 be the forw , ma is e ren
Tim ring feed rive kw iffe
u
(D ber the d loc r d
7
terc (fo l)
Tim ring
un ise ns
co ckw tio nua
8 (D
u
ow
n
ad nc a
s d p he d clo fu m
m r a tt on tion
o
Bo oms rves r he
u te bu truc
te ing Ins 3
9 Bo w ha rves mm 4G
10 Sle w ha gra Opti
11 Sle pro e
nd ee th
12 t a
se s, s
Pre ction
13 fun
9
4 -
19
PONSSE
PONSSEBEAR
BEAR
POWER,
POWER,PRODUCTIVITY
PRODUCTIVITY
AND
ANDJOY
JOYOF
OFWORKING
WORKING
THETHE
FULLY
FULLY
UPGRADED
UPGRADEDPONSSE
PONSSEBEAR is is
BEAR the
the
genuine
genuine
king
king
of of
harvesters
harvesters
in in
the
the
E PO N SS
E PO E E
N SS forest.
forest.It It
represents
represents the
the
best
best
performance,
performance, productivity
productivity
and
and
AH
W AWTC TCTH
H TH
R 36 0 D0EG
R 36 R EER EE DVIEO
D EG VI D EO
serviceability
serviceability available
available
atat
the
the
moment.
moment.
B EA
B EA
THETHE
PONSSE
PONSSEBEAR
BEARIS IS
POWERED
POWEREDbyby anan
engine
engine that
that
meets
meets the
theEUEUStage
Stage IV IV
emission
emission levels.
levels.Benefits
Benefits
of of
thethe
new
newtechnology
technology include,
include,along
along with
withaa
cleaner
cleanerenvironment,
environment, a better
a better response
response toto
sudden
sudden needs
needs of of
power
power and
and
a lower
a lowerfuel
fuel
consumption.
consumption. TheTheBear
Bearis is
a strong
a strong indication
indicationof of
the
the
significance
significance of of
customer
customer cooperation
cooperation in in
thethe
product
product development
development of of
forest
forestmachines:
machines: the
the
new
newsolutions
solutions
enable
enable more
more powerful,
powerful,
reliable
reliable
andandergonomic
ergonomic harvesting.
harvesting.
THETHE
EIGHT-WHEEL
EIGHT-WHEELBEAR
BEARis is
anan
unbeatable
unbeatable andand environmentally
environmentallyfriendly
friendly
powerhouse
powerhouse forfor
heavy
heavy duty
dutyharvesting
harvesting and
anddemanding
demandingconditions.
conditions.
The
The successful
successful ergonomics
ergonomics increases
increases productivity
productivity
and
and
improves
improves
operating
operating comfort
comfort andandthis
thisis is
exactly
exactly
whatwhatthe
theBear
Bear
provides:
provides: the
the
completely
completely newnewcabin
cabin and
anditsits
control
control
equipment
equipment provide
provide
more
more space
space
and
and comfort
comfortalong
alongwith
withexcellent
excellent visibility.
visibility.
THETHE
PONSSE
PONSSE
BEAR
BEAR
HAS
HASTRULY
TRULY
BEEN
BEEN
UPGRADED:
UPGRADED:it it
hashas
a more
a moredurable
durable structure
structure
and
and the
the
C6C6and
and
C55C55cranes
cranes provide
provide
sturdier
sturdier but
but
smoother
smoother operation,
operation,
superior
superior power
powerand
andimproved
improved access
accesstotocomponents
components requiring
requiring
maintenance.
maintenance. Furthermore,
Furthermore, the
the
maintenance
maintenance intervals
intervals
of of
the
the
Bear
Bear
have
have
been
been increased
increasedtoto
900/1,800
900/1,800 hours,
hours,
extending
extendingthe
the
operating
operating hours
hours
between
between services.
services.
AA
logger’s
logger’s
best
best
friend
friend
www.ponsse.com
www.ponsse.com
Strong rootS in
logging
The new PONSSE Scorpion rais- We deSign and manuFacture all PONSSE products and their
es productivity and ergonomics key components ourselves. This guarantees that we remain at the
in harvesting to a whole new forefront of development and that our products meet the specific
level and sets the future standard for the requirements of forest professionals. PONSSE forest machines are
driver’s working environment. in use in all key areas of industrial harvesting in the world, close to
40 countries.
22
BASIC MACHINE PRODUCTS
ENGINE
MB 0068799
MB 0068529
ALTERNATOR REGULATORS
23
POLY V-RIPPED V-BELTS FOR PONSSE MACHINES
V-BELTS WITH MB-ENGINES
Size No. Description No.
13X1350 0027029
13X1385 0027021
13X1400 0027045
13X1450 0027011
13X1475 0056749
13X1500 0055049
13X1525 0055238
13X1550 0055304
13X1575 0058040
13X1625 0027037
13X1700 0055240
24
BASIC MACHINE PRODUCTS
900-series 1 Alternator
2 Guide roller
3 Water pump
4 Crankshaft
5 Tightening roller
6 Air conditioning
compressor
7 Support roller
1 Charging alternator
2 Guide roller
3 Crankshaft
4 Tightening roller
5 Water pump
6 Guide roller
7 Air conditioning compressor
• Check the condition of the poly V-ribbed The engine may overheat if the poly
belt regularly. V-ribbed belt operatesincorrectly. In that
• Replace the belt if it is in a poor condi- case, the belt does not rotate the cooling
tion. The belt may operate poorly if it is pump or alternator.
incorrectly installed, worn, torn, frayed
A poly V-ribbed belt in a poor condition
or dirty.Before replacing the poly V-
may be torn, and the entire belt or parts
ribbed belt, contact an authorised PON-
of it may come off the engine and cause
SSE service for more detailed replace-
damage to those in the vicinity.
ment instructions.
25
CABIN
SEATS
Description No.
26
BASIC MACHINE PRODUCTS
Windscreen wiper
accessories
SEAT BELTS
Description No.
Bege 90 cm 0028481
500 mm BOS3398110517100
600 mm BOS3398110425
700 mm 0068828
800 mm 0036013
1000 mm 0072206
SEAT COVERS
Description No.
27
Audio
Continental CD7416UB-OR
SIGHT 2 front/rear BOS3397020132 0077507
USB, CD, BT, WMA
Continental CDD7418UB-OR
TP2000 front 0068824 0077506
USB, CD, BT, WMA, DAB+, DMB
VDO TR7322U–OR RDS TUNER
TP2000 rear 0068823 0076063
with USB 2.0, 24V
Side window,
BOS0390217701100
old model
Side window,
0063157
right side
Side window,
0063158
left side
LOUDSPEAKER
Description No.
28
BASIC MACHINE PRODUCTS
GSM ANTENNA
Description No.
Description No.
Antenna+base+cable 0061115
Antenna+base 0075265
Rod 0062510
OPTI ACCESSORIES
Description No.
Mouse 0056252
29
Description No.
Description No.
Colur 00573812
Black 00573811
PRINTERS
Description No.
Description No.
Description No.
Black PGI-35 (iP100 / iP110) 0066957
Black 0063251
Colour 0063252
USB DEVICE
Description No.
30
BASIC MACHINE PRODUCTS
Description No.
Air-conditioning
and heatin components Tap, metal 0012705
FAN MOTORS
AIR-CONDITIONING COMPONENTS
Description No.
Description No.
SIGHT II 0012701
Compressor 0032776
KL156102
SIGHT II, metal frame
KL156112
Compressor, machines with MB-engine,
0067190
accessory, EU STAGE IIIA & IIIB
LIGHT 0042291
Expansion valve,
0074801
Model Series 2015
31
PONSSE SCORPION
A REAL BEAST OF A
HARVESTER
ON VIDEO
WATCH THE PONSSE SCORPI
PONSSE OFFERS THE MOST COMPREHENSIVE and versatile selection of the best
forestry technology in the market – for all challenges in harvesting.
THE FULLY NEW PONSSE SCORPION is the latest member in the range of the world’s
leading forest machines. Built without compromises, the harvester is all
about the driver.
OFFERING A FULLY OPEN CABIN VIEW, AND UNBEATABLE STABILITY AND POWER, the machine
operates bearing the environment in mind and with minimum surface
Ponsse North America, Inc.
4400 International Lane pressure. The revolutionary triple-frame structure ensures a low axis point
Rhinelander, WI 54501 for levelling, thus making the machine extremely stable and comfortable.
USA Economy and comfort have also been considered in positioning service
Tel. +1 715 369 4833
Fax +1 715 369 4838
points. The new 4F engine and the improved hydraulics have enabled
extending the service intervals from 600/1,200 hours to 900/1,800
Ponsse UK Ltd. hours.
Unit 3, Broomhouses 1
Industrial Estate Lockerbie, THE NEW PONSSE SCORPION raises productivity and ergonomics in harvesting
Dumfriesshire DG11 2RZ to a whole new level and sets a new standard for the driver’s working
UNITED KINGDOM
Tel. +44 1576 203 000
environment.
Fax +44 1576 202 202
FILTERS
PONSSE Filter sets
Now you can get from Ponsse all the necessary filters for all your scheduled maintenance in a convenient
and economical package. You can easily order the filter set for your machine type with only one part number.
Benefits of the filter set • all the appropriate filters are on hand during
• save time during maintenance maintenance
• get the filters you need more economically • all filter sets are of Ponsse’s original quality
Buffalo 8w 030001-030902
Buffalo 6w 0150001-0150039
BuffaloKing 8w 0120001-0120152 0064731
BuffaloKing 6w 0190001-0190040
BuffaloDual 070001-070155
Buffalo 6w/8w 0310001➠/0320001➠
BuffaloKing 6w/8w 0350001➠,0360001➠ 0070763
BuffaloDual 0360001➠
33
Description No. Description Serial number No.
A010001-A010092 0074632
NOTE! AdBlue filters 0071206 and 0071207 have to be Scorpion King,
ordered separately for EU STAGE IIIB engines EU STAGE IIIA
A010093➠ 0075923
A010001-A010092 0073949
Scorpion King,
FILTER SETS TP2015, BASIC SERVICE EU STAGE IV
A010093➠ 0075924
Description No.
EU Stage IIIA, 4 cylinder engines 0066522 FILTER SETS TP2015 FOR FORWARDERS,
COMPLETE SERVICE
EU Stage IIIA, 6 cylinder engines 0066496
Description Serial number No.
EU Stage IV, 4 cylinder engines 0074587 Wisent 8w,
A030003➠ 0077176
EU STAGE IIIA
EU Stage IV, 6 cylinder engines 0073505
Wisent 8w,
A030003➠ 0074580
EU STAGE IV
FILTER SETS TP2015 FOR HARVESTERS, Elk 6w/8w,
A170001➠/A070002➠ 0077176
EU STAGE IIIA
COMPLETE SERVICE
Elk 6w/8w,
Description Serial number No. A170001➠/A070002➠ 0074580
EU STAGE IV
Beaver, Gazelle 8w,
A100001➠ 0077177 A160001➠ 0077175
EU STAGE IIIA EU STAGE IIIA
Beaver, Gazelle 8w,
A100001➠ 0075005 A160001➠ 0075363
EU STAGE IV EU STAGE IV
Ergo 6w/ 8w, Buffalo 6w/8w/ A150001➠ / A080002➠
A050003➠, A090002➠ 0074704
EU STAGE IIIA AF/King/Dual A060003➠/A120001➠/ 0074636
Ergo 6w/ 8w, EU STAGE IIIA A140001➠
A050003➠, A090002➠ 0073068
EU STAGE IV Buffalo 6w/8w/ A150001➠ / A080002➠
A020001- A020026 0074634 AF/King/Dual A060003➠/A120001➠/ 0073071
Bear 8w, EU STAGE IV A140001➠
EU STAGE IIIA
A020027➠ 0075471
Elephant/King/ A180001➠, A130001➠,
A020001- A020026 0073066 AF/King AF A110001➠ 0075925
Bear 8w, EU STAGE IIIA A110001➠, A200001➠
EU STAGE IV
A020027➠ 0075472
Elephant/King/ A180001➠, A130001➠,
Scorpion, AF/King AF A110001➠ 0075364
A040039➠ 0074633 EU STAGE IV A110001➠, A200001➠
EU STAGE IIIA
34
BASIC MACHINE PRODUCTS
35
Filters for PONSSE machines with MB-engine
Engine oil MB 4 - - - - -
36
BASIC MACHINE PRODUCTS
37
Filters for PONSSE machines with MB-engine
Engine oil MB 4 - - -
38
BASIC MACHINE PRODUCTS
39
Filters for PONSSE machines with MB-engine
Bear Bear Bear Bear
Filter Description EU STAGE IV EU STAGE IV EU STAGE IIIA EU STAGE IIIA
A020001- A020026 A020027➠ A020001- A020026 A020027➠
Cabin Fresh Air 0076885 0076885 0076885 0076885
40
BASIC MACHINE PRODUCTS
41
Filters for PONSSE machines until year 2000
42
BASIC MACHINE PRODUCTS
HS15,
Machine HS15, Valmet 420 HS15, HS16 ERGO,
Custom Perkins
Description engine engine Caterpillar engine
engine
Pilot pressure 0036673 x 2 0036673 x 2 0036673 x 2 0036673 x 2
0038148, 0038148,
Air filter, fine 0038148 0038148
0038142 0038142
0067409
160001-93
Water separator - - 0067412
0067408
160094 ➠
43
Filters for PONSSE machines until year 2000
Working pressure - - - -
44
BASIC MACHINE PRODUCTS
Breether, compressor - - - -
45
When säästökäynnille
Kytke you switch into -economy mode –
niin enemmän
and then have voimaa
more power
jää yli.left over.
Sitä onFeel
That’s Feelthe
theDrive.
Drive.
Reduced costs,
Vähemmän kustannuksia,
improved comfort:
enemmän With
mukavuutta:
Webasto Engine-Off
Webaston Heating
Engine-Off
technology
Heating tekniikalla
your
seisontalämmityksesi
heating system does miettii
the thinking
puolestasi
for you
– ja and
kytkeytyy
automatically
automaattisesti
activates
päälle,
as soon
kunasmoottori
the
ei enää käy.
engine’s switched off. The cabin interior always stays comfortable and the engine remains
Hytti
at operating
pysyy aina
temperature.
miellyttävänä
Then
ja you’re
moottori
ready
käyntilämpötilassa.
to get going again,
Näininvoit
an instant.
jatkaa heti
For täydellä
more
teholla! Enemmän
information on Engine-Off
tietoja Engine-Off
Heating technology
Heating :staand
ja lämmitys-
our heating
ja ilmastointiratkaisuistamme
and air-conditioning
go to www.webasto.com
löydät osoitteesta
solutions, www.webasto.com
BASIC MACHINE PRODUCTS
PAUSE HEATERS
Thermostat 0066536
Burner 0066530
Description No.
Thermostat 0059964
47
Description No.
Description No.
Description No.
48
BASIC MACHINE PRODUCTS
ELECTRICAL EQUIPMENT
Batteries
The condition of the batteries plays an essential the battery fluid contains acid, wear the required
part in guaranteeing uninterrupted operations protective equipment when checking it. The fluid
and operational safety. Insufficient battery fluid level does not need to be checked in service-free
and poorly fastened sockets can cause damage batteries.
to the electrical system’s components. Because
49
Bulbs
Description No.
H3 24V/70W 0013110
HEADLIGHTS
Description No.
Headlight 0056153/0058468
Headlight H4 0056153
LARGE BULBS WITH METAL BASE
Headlight with a parking light H4 0058468
Description No.
H4 24V/70W headlight 0024588
24V/21W 0012799
24V/15W 0012808
24V/5W 0012815
50
BASIC MACHINE PRODUCTS
Description No.
Description No.
XENON, hanging 0070094 High beam N44 12-24V 40W 1900lm 0071468
51
ELECTRICAL CONNECTOR SET
Description No.
Description No.
*) 0073744-0073746
Bright LED light: service light, presentations
**) 0072322-0072324
Red LED light: to indicate the rear overhang of an
excessively long load
Description No.
52
BASIC MACHINE PRODUCTS
Grapple 0076172
DIRECTIONAL VALVE
Extension 0076171 Description No.
Lifting 0076170
Tilt 0068083
DIRECTIONAL VALVE
Rotator 0068084
Description No.
Rollers 0068086
DIRECTIONAL VALVE
Description No.
53
DIRECTIONAL VALVE DIRECTIONAL VALVE
DIRECTIONAL VALVE
Description No.
- differential locks
- big pump control HS10, old model
0028037 DIRECTIONAL VALVE
Description No.
- ponsse-cut 0057959
DIRECTIONAL VALVE
Description No.
DIRECTIONAL VALVE
Description No.
DIRECTIONAL VALVE
- fast feed valve (main spool)
Description No. 0064898
H53 / H73
- small pump control valve HS10,
0028041
old model
54
BASIC MACHINE PRODUCTS
Proportional
Pressure reducing valves
directional valve
DIRECTIONAL VALVE
PRESSURE REDUCING VALVE
Description No.
Description No.
- stump treatment
0042962
- Rotator - 10 - 140 bar, saw bar feeding 0042960
DIRECTIONAL VALVE
Description No.
DIRECTIONAL VALVE
Description No.
Description No.
DIRECTIONAL VALVE
Description No.
55
PRESSURE REDUCING VALVE
PRESSURE RELIEF VALVES
Description No.
Description No.
Description No.
- Proportional pressure for
the feed rollers H60 PRESSURE RELIEF VALVES
0055028
- Proportional pressure for
the delimbing knives H73e Description No.
- 10 - 200 bar
relief valves
Description No.
Description No.
56
BASIC MACHINE PRODUCTS
Description No.
Description No.
Description No.
- 210 bar,
0055170 CHECK VALVE
- brake charging S15eh with Mico-valves
Description No.
- 1 bar 0043012
57
PRESSURE CONTROLLED CHECK VALVE
CHECK VALVE
Description No.
Description No.
- 1 bar 0056709
- 1 bar
0043013
- saw bar feed
Pressure controlled
check valve
CHECK VALVE WITH FLOW CONTROL
Description No.
Description No.
- 5 bar 0038176
Description No.
- 1 bar 0043015
58
BASIC MACHINE PRODUCTS
3-places 149A92
BY-PASS SECTION
4-places 250124
Description No.
- rotator
- stop screw 0060235x2
- orifice 0.45 mm 0042569x2 SCREWS
P10682
- cu-seal 0034355x2
- allen screw M6-10 0008797x2 Description No.
- O-ring 9.25-1.78 0057170x4
M5 - 25 0047201
M5 - 30 0012573
CONNECTION BLOCK
M5 - 40 0012577
Description No.
M5 - 60 0012570
Description No.
M5 - 80 0012578
- Proportional pressure
513C15
for the feed rollers H60
M5 - 90 0012579
M5 - 100 0039563
COVER PLATE
M5 - 110 0046980
Description No.
M5 - 130 0056881
- brake charging Ergo/Beaver
0060205
Note! P open to A, and T open to B
M5 - 145 0046983
59
Description No.
O-RING
M5 - 150 0047220
Description No.
M5 - 155 0057017
- 7.65 - 1.78 90-shore 0042227
M5 - 160 0057669
- 9.25 - 1.78 NG6 0038185
M5 - 165 0046985
- 9.25 - 1. 78 90-shore 0057170
M5 - 190 0046987
- 9.25 - 1.78 teflon -NG6 00571701
PNEUMATICS
Description No.
BOOSTER CYLINDER
Description No.
BRAKE PARTS
Description No.
60
BASIC MACHINE PRODUCTS
OTHER ITEMS
FARM TOOLS
PONSSE Fuel container
Description No.
Description No.
250 L, FINNCONT,
0077332
refill pump not included
FUEL TANK ACCESSORIES
250 L, FINNCONT, with refilling pump 0077195
Description No.
S10,S15,S16,Bear, Beaver, Bison,
Buffalo <2004, Caribou, Elephant, AM02719
FUELK Ergo
Bear 021000 ➠
0070353
Description No. & Model Series 2015
Buffalo 2004>,Gazelle, Elk Wisent +
Fuelk 970 L 0071280 0068756
refuelling pump
61
OIL DRAIN HOSES
Description No.
Description No.
Bison 020022- , Buffalo 030069- FUEL TANK PROTECTION PLATES AND PIPES
030141, Buffalo Dual 070001-0700035 0073971
331,5 mm
”Gazelle 0110001-, Wisent 080001- BEAR
090001, Wisent Dual 0100001-, Elk 0061894
0130001- 0140001- 442,5 mm Description No. pcs
62
BASIC MACHINE PRODUCTS
Description No. pcs Light cover guide rail, left side P45915 1
Exhaust pipe support and
P42969 1 Light cover fastening tap P43232 2
protection plate
Fastener of the exhaust pipe
P43002 1
and support
Bear 8w 0075942
Side plate, left AM03203 1
Side plate, right AM03228 1 Bear 8w, Ergo 6w, Ergo 8w, Buffalo AF,
0075943
Buffalo 8w, Elephant 8w
Side plate, left AM03229 1 When ordering frames for the front frame, note that
the machine must be equipped with front end protection.
BEAR 8W If no front end protection is installed, it must be ordered
separately.
Description No. pcs
63
Ride
tall
TWIN FORESTRY
T440 & T480 —
SERIOUS TIRES FOR
SERIOUS FORESTERS
You are better than ever at forestry. We are better than ever at forestry tires.
The new Twin Forestry series from Trelleborg is our ultimate tribute
to the business and the people who make it. Expect even better traction,
stability and accessibility thanks to exclusive new tread designs,
improved resistance properties and better-than-ever track compatibility.
And as always, wherever you are we are there to support you.
The inflation pressure should be adjusted to the ter- Driving with tracks
rain conditions and load • Use the recommended inflation pressure for tracks.
• Use a lower pressure if the terrain is relatively rock free and • Check that the tracks are correctly tensioned. The tracks must sag
where greater bearing capacity is required. approximately 50 mm between the wheels.
• Use a higher pressure for heavy service in demanding terrain. • Check that the track fit the tyre. On one side, there must be a dis-
tance of approximately 15 mm between the track’s side support
Check on inflation pressure and the tyre.
• The tyre must daily be visually checked and the inflation pressure • Use of chains does not affect the inflation pressure.
must be checked at least once a month.
• A tyre that has been removed should be checked regularly during Tyre maintenance
the first week after it has been remounted. This because it might • Regular inspection and maintenance of the tyre increases service
be air pockets between the tyre and tube that ventilate out, and life.
reduces the inflation pressure. • At the daily visual inspection of the tyre, it is important to note any
• The inflation pressure is lower in cold conditions than in hot damage, such as splinters and large gashes or pin hole damage that
conditions. causes moisture that penetrate into the tyre shell. Any such dam-
age, should be repaired without causing a separation (external rub-
ber releasing from the tyre shell).
• Check the tension of the anti-slide devices, and make sure that they
do not have any loose links or sharp parts that can damage the tyre.
• Remove any branches or wood splinters that have got trapped
between the tyre and rim.
Filling forest tyres with fluid
• The tyre can be filled with fluid to increase the stability and pull force of the machine.
• Trelleborg recommends a filling of 50% of the tyre’s volume. Maximum permitted is 75%.
• The ballast (fluid) must be water. At degrees below zero, a mixture of calcium chloride/water or glycol/water is recommended.
• At a mixture of 35%, calcium chloride increases the mixture’s density up to approximately 1.2 kg/litre.
By turning the wheel and pressing the valve needle, you can easily decide whether the fluid volume is
75 % 50%
75% or 50%.
• At calculation of the wheel load, the entire ballast should be added to the machine weight.
• Because of the lower air volume, fluid filled tyres are less elastic and for that reason also more
sensitive to point loads. The rolling resistance and the dynamic forces of the wheel and suspension
are also increasing.
• Only use pressure gauges that tolerate fluid mixtures.
• To obtain the correct fluid volume, look into Trelleborg’s technical tyre manual
at www.trelleborg.com/wheelsystems_uk.
Mounting
• To prevent the tyre from slipping on the rim, use a good quality of drying installation paste.
• Inflate the tube after it has been placed into the tyre. This to avoid that the tube get creased.
66
TYRES, CHAINS, TRACKS
Tyres
TRELLEBORG
710/45-26.5 20 PR 0076979
600/65-34 0056849
710/55-34 0056796
T428 is an all-round tire with ex-
cellent pull force and compatibility
with tracks and chains.
Description No.
710/40-22.5 0063585
600/55-26.5 20 PR 0077473
710/45-26,5 18 PR 0061721
710/45-26,5 20 PR 0076980
710/45-26.5 24 PR 0076981
750/50-26.5 24 PR 0077027
67
68
TYRES, CHAINS, TRACKS
NOKIAN
Nokian Tyres is a pioneer in forestry machinery
tyres. Nokian Tyres has decades of experience
in manufacturing and designing forestry tyres
in close co-operation with forestry machinery
manufacturers.
Description No.
FOREST KING
710/40-22.5 PR16 0055295
A stable forestry tyre with sturdy sides especially
designed for forwarders. Excellent fit with tracks. 750/55-26.5 PR20 0062869
RIDER
Radial tyre for CTL forestry machines.
Excellent traction without tracks, comfortable on
a hard surface.Straight sides and a patented side
protection.
NOKIAN FOREST KING F2
Description No.
Description No.
69
U-Grip
Superior
quality chain
ALLIANCE
Description No.
NOKIAN RIDER
Description No.
650/45R24.5 0067220
600/55/26.5 0066979
710/45/26.5 0064976
800/50R26.5 0070461
600/65R34 0068393
TYRE PRESSURE GUARD, REPLACES VALVE CAP
710/55R34 0068394
Description No.
Description No.
Description No.
71
TYRE INFLATOR Chains
Description No.
700/45-22.5 0026117
800/40-26.5 0057861
600/65-34 0028761
700/55-34 0028761
700/70-34 0064451
Size No.
10/45-26,5 16 mm 0076150
700/55-34 16 mm 0076151
Size No.
700-34 0066159
72
TYRES, CHAINS, TRACKS
OFA
OFA stands for the green chains, earlier known
to quality conscientious users as Ovako chains.
All traction chains are made from case hardened
boron steel. The mounting and dismounting of
OFA chains is a simple one-man operation. OFA
chains offer excellent grip and good protection
against external damage. OFA chains are
available for all popular tire sizes.
700/50-26.5
U-Grip 16 mm 0061407
710/45-26.5
700/45-22.5
U-Grip 16 mm 0060547
710/40-22.5
750/55-26.5
U-Grip 16 mm 0066014
780/55-26.5
3T 3ST
73
OFA MATTI W Double Diamond OFA MATTI W Triple Diamond
74
TYRES, CHAINS, TRACKS
New
Shap ed !
ain Link
Ch
75
TRYGG GIANT U-GRIP
TRYGG
Norwegian chain manufacturer
since 1939.
www.trygg.no
Megastud 160 TS
- Developed to meet the rigorous
forestconditions.
- Provides excellent traction
- Offering all over tyre protection
- Designed to offer outstanding durability
- Perfect fit to tyre*=TS= Tyre side protection
and tension chain.
Size No.
700/50-26,5 16 mm 0076152
700/55-34 16 mm 0076153
77
Chain holders
CHAIN HOLDERS
Description No.
CHAIN LINKS
22,5 0064359
Description No.
26,5 0064360
16 mm Chain link PONSSE 0073706
CHAIN HOLDERS
Description No.
22,5 0064922
26,5 0064923
34 0064924
Description No.
22,5
0066790
Hydraulic ST0352 10 bolts
26,5 0066788
Chain pin extractor 0063734
26,5 0066789
Low hub, 175 mm high
34 0066815
78
TYRES, CHAINS, TRACKS
www.eco-tracks.com
EVO-SOFT™
The EVO track with extended and
curved cross members that provides
improved load capacity on sensitive
ground and good traction in hilly
terrain. The track is also gentler to
the terrain’s surface layer.
MAGNUM™
The best choice for extreme flotation
and ground protection in very soft
conditions. With the new generation
of extended cross members, it also
minimizes ground disturbance when
turning. The smooth cross member
profile protects the ground, roots and
brush mat.
ECO-TRACK™
One concept, the best all around
track. Fits most machine types and
offers good traction and flotation on
most ground conditions. The ben-
efits of the ECO-Track make it one
of the most environmentally friendly
track offerings.
ECO-TRACK
friendly track offerings.
One concept, the best all around track. Fits most machine types and
offers good traction and flotation on most ground conditions. The
benefits of the ECO-Track make it one of the most environmentally
friendly track offerings.
SOFT
The new generation of extended cross members with curved ends for
additional flotation and easier machine turning. Increases traction on
hilly terrain and reduces ground disturbance on sensitive sites.
SOFT SOFT
The new generation of extendedSoft cross members
soveltuu with curved
pitkien, muotoiltujen ends foransiosta pehmeisiinkin
telakenkiensä
työkohteisiin ja suojaa samalla maaperää. Telamallin pyöräpito maa-
SOFT
additional flotation and easier machine turning. Increases traction on
perään nähden on myös hyvä.
hilly terrain and reduces ground disturbance on sensitive sites.
The new generation of extended cross members with curved ends for
additional flotation and easier machine turning. Increases traction on
hilly terrain and reduces ground disturbance on sensitive sites.
SOFT
The new generation of extended cross members with curved ends for
additional flotation and easier machine turning. Increases traction on
hilly terrain and reduces ground disturbance on sensitive sites.
EVO EVO
An all around track providing excellent traction
Monipuolinen and good
metsäkonetela. flotation.
EVO:n pyöräpito on erinomainen ja
The cross member design is self telan rengassuojaavuus
cleaning on myös
and provides hyvä. Telakenkämuoto aikaansaa
excellent
lisäksi hyvän renkaan ja telan välisen puhdistuvuuden lumesta tai
strength and anti-slip properties against
savesta. the tire. The unique sunken
EVO
cleat position minimizes welding stresses when re-cleating.
An all around track providing excellent traction and good flotation.
EVO
The cross member design is self cleaning and provides excellent
strength and anti-slip properties against the tire. The unique sunken
An all around track providing excellent traction and good flotation.
cleat position minimizes welding stresses when re-cleating.
The cross member design is self cleaning and provides excellent
strength and anti-slip properties against the tire. The unique sunken
EVO
cleat position minimizes welding stresses when re-cleating.
An all around track providing excellent traction and good flotation.
The cross member design is self cleaning and provides excellent
EVO-SOFT
strength and anti-slip properties against the tire. The unique sunken
cleat position minimizes weldingTela, jonka muotoillut, pitkät, sivulenkkilinjan ylittävät telakengät li-
stresses when re-cleating.
säävät koneen kantokykyä ja suojaavat maaperää. Pyörä- ja maapito
ja puhdistuvuus ovat EVO-Softin lisäominaisuuksia.
EVO-SOFT
The EVO track with extended and curved cross members that provides
improved load capacity on sensitive ground and good traction in hilly
terrain. The track is also gentler to the terrain’s surface layer.
EVO-SOFT
The EVO track with extended and curved cross members that provides
EVO-SOFT
improved load capacity on sensitive ground and good traction in hilly
terrain. The track is also gentler to the terrain’s surface layer.
The EVO track with extended and curved cross members that provides
improved load capacity on sensitive ground and good traction in hilly
terrain. The track is also gentlerEVO-M
to the terrain’s surface layer.
Järeytetty telamalli EVO:sta. MAX-telamallista tuttu, vahva, lyhyellä ja-
EVO-SOFT olla oleva sivulenkitys tekee EVO-M:stä raskaisiin koneisiin ja työtehtä-
viin soveltuvan telamallin, jonka vierintävastus on pieni.
The EVO track with extended and curved cross members that provides
EVO-Mload capacity on sensitive ground and good traction in hilly
improved
A powerful
terrain. The variant
track is of thegentler
also EVO track
to thewith the proven
terrain’s surfaceMAX linkage
layer.
system that works for the heaviest machines. An all around track
providing excellent traction, flotation and anti-slip properties. Also
available with the new generation cross members with curved ends
and suitable for rough terrain and very demanding conditions.
OF
Mäkisiin, kivisiin, savisiin tai lumisiin maastoihin soveltuva tela. Hyvä
80
pyörä- ja maapito, vetokyky ja puhdistuvuus.
EVO-M
KOVAX
A powerful variant of the EVO track with the proven MAX linkage
system that works for the heaviest machines. An all around track
Cross-bars are alsotraction,
providing excellent available in shorter
flotation and versions.
anti-slip properties. Also
EVO-M
available with the new generation cross members with curved ends
A powerful
and suitablevariant of the
for rough EVOand
terrain track with
very the provenconditions.
demanding MAX linkage
system that works for the heaviest machines. An all around track
EVO-M
providing excellent traction, flotation and anti-slip properties. Also
available with the new generation cross members with curved ends
A powerful variant of the EVO track with the proven MAX linkage
and suitable for rough terrain and very demanding conditions.
system that works for the heaviest machines. An all around track
KOVAX-SOFT
providing excellent traction, flotation and anti-slip properties. Also
available with the new generationEVO-Mcross members with curved ends
and
A suitable
brand newfor rough
track Järeytetty
terrain and
in ECO-Track very telamalli
family. EVO:sta. conditions.
demanding
KovaX-Soft MAX-telamallista
is an tuttu, vahva, lyhyellä ja-
olla oleva sivulenkitys tekee EVO-M:stä raskaisiin koneisiin ja työtehtä-
all-round track that fits most machines andtelamallin,
viin soveltuvan soil conditions.
jonka vierintävastus on pieni.
The track provides good grip and load-bearing capacity.
KovaX-Soft is gentle on gravel roads and brush mats.
OF
The track for steep, rocky and muddy terrain. The cleaning properties
make it popular in winter conditions. Light weight and economical
where traction is the primary requirement. The cross member design
OF
provides excellent strength and anti-slip properties against the tire.
The track for steep, rocky and muddy terrain. The cleaning properties
make it popular in winter conditions. Light weight and economical
OF
where traction is the primary requirement. The cross member design
provides excellent strength andOFanti-slip properties against the tire.
The track for steep, rocky and Mäkisiin,
muddy kivisiin,
terrain.savisiin
The tai
cleaning properties
lumisiin maastoihin soveltuva tela. Hyvä
pyörä- ja maapito,
make it popular in winter conditions. vetokyky
Light weight ja puhdistuvuus.
and economical
where traction is the primary requirement. The cross member design
provides excellent strength and anti-slip properties against the tire.
MAX
A premium track for large machines with the new generation extended
cross members and closer linkage system that provides smooth travel
and increased flotation. Suitable for rough terrain and very deman-
MAX
ding conditions such as steep MAX
slopes, rocky terrain and deep snow.
Raskaimpien metsäkoneiden, vaativiin työtehtäviin soveltuva telamalli.
A premium track for large machines with the new generation extended
Max-telan pyörä- ja maapito on hyvä. Pitkien, päistään taivutettujen
cross members and closer linkage system
telakenkien that provides
ja tiheän smooth
telakenkäjaon ansiostatravel
telan kantokyky on myös
MAX
and increased flotation. Suitable
hyvä.for rough terrain and very deman-
ding conditions such as steep slopes, rocky terrain and deep snow.
A premium track for large machines with the new generation extended
cross members and closer linkage system that provides smooth travel
and increased flotation. Suitable for rough terrain and very deman-
ding conditions such as steep slopes, rocky terrain and deep snow.
MAX-MAGNUM MAX-MAGNUM
Sekatelamalli, joka on sekä kantava että pitoa antava. Toimii myös
A combination of Magnum and OF cross members brings together
turvemailla.
both grip and carrying capacity. An excellent track for peat bogs.
MAX-MAGNUM
A combination of Magnum and OF cross members brings together
both grip and carrying capacity. An excellent track for peat bogs.
MAX-MAGNUM
A combination of Magnum and OF cross members brings together
both grip and carrying capacity. An excellent track for peat bogs.
81
best self cleaning tracks and very durable.
EX
EX
The cross member has been designed for the most demanding condi-
EX requirement. Suitable for conditions
tions where traction is the primary
EX
The cross member has been designed
such as deep snow, steep inclinesTela, joka for
and tekeethe
rocky
most demanding
metsäkoneesta
terrain. etenemiskyvylle
EX
condi- etenijän. Korkea,
vaikeiden rinteiden
is onerinteiden
ofsyvässä
the etenijän.
tions where traction is the primary
Tela,
kapearequirement.
joka
telakenkä Suitable
tekee metsäkoneesta
on takeena for conditions
vaikeiden Korkea,
lumessa, vaikeis-
best self cleaning tracks and very
kapea durable.
telakenkä on tai
sa mäkimaastoissa takeena etenemiskyvylle
kivisissä työkohteissa. syvässä lumessa, vaikeis-
such as deep snow, steep inclines and rocky terrain. EX is one of the
sa mäkimaastoissa tai kivisissä työkohteissa.
best self cleaning tracks and very durable.
EX
The cross member has been designed for the most demanding condi-
tions where traction is the primary requirement. Suitable for conditions
such as deep snow, steep inclines and rocky terrain. EX is one of the
BALTIC
best self cleaning tracks and very durable.
Provides high flotation in soft and sensitive terrain. The smooth cross
member profile protects the ground, roots and brush mat. Ideal for
thinning applications.
BALTIC
BALTIC
Telamalli pehmeisiin, helposti vaurioituviin maastoihin. Kenkämuoto
BALTIC Telamalli pehmeisiin,
mahdollistaa
mahdollistaa
helposti
risumaton
risumaton
suojaa samalla
ehjänä
ehjänä
maapohjaa
vaurioituviin
pysymisen maastoihin.
ja pysymisen
Kenkämuoto
sen päällä ajettaessa ja
juuristoa. sen päällä ajettaessa ja
BALTIC
Provides high flotation in soft and sensitive
suojaa terrain. The
samalla maapohjaa smooth cross
ja juuristoa.
member profile protects the ground, roots and brush mat. Ideal for
Provides high flotation in soft and sensitive terrain. The smooth cross
thinning applications.
member profile protects the ground, roots and brush mat. Ideal for
thinning applications.
BALTIC
Provides high flotation in soft and sensitive terrain. The smooth cross
member profile protects the ground, roots and brush mat. Ideal for
thinning applications.
MAGNUM MAGNUM
MAGNUM
Balticistaand
The best choice for extreme flotation kehitetty,
ground kantavampi telamalli.
protection in Optimoitu,
very pitkä telakenkä
Balticista kehitetty,maapohjaa
on erinomaisesti kantavampisuojaava
telamalli.jaOptimoitu, pitkä
ylivoimaisen telakenkä
kantokyvyn
soft conditions. With the newon generation
erinomaisestiof
antava. extended
maapohjaa cross jamembers,
suojaava ylivoimaisen kantokyvyn
it also minimizes ground disturbance
antava. when turning. The smooth cross
member profile protects the ground, roots and brush mat.
MAGNUM
MAGNUM
The best choice for extreme flotation and ground protection in very
soft conditions. With the new generation of extended cross members,
The best choice for extreme flotation and ground protection in very
it also minimizes ground disturbance when turning. The smooth cross
soft conditions. With the new generation of extended cross members,
member profile protects the ground, roots and brush mat.
it also minimizes ground disturbance when turning. The smooth cross
member profile protects the ground, roots and brush mat.
MAGNUM U and ground protection in very
The best choice for extreme flotation
UTela on saanut nimensä U-poikkileikkauksen omaavasta telakengästä.
soft conditions. With the newTela
generation
onantaa
Malli saanut of extended
nimensä
hyvän jacross members,
U-poikkileikkauksen
kantokyvyn maapidon.omaavasta telakengästä.
it also minimizes ground disturbance when
Malli antaa hyvänturning.
kantokyvynThe smooth cross
ja maapidon.
member profile protects the ground, roots and brush mat.
U
A track for all operating conditions. The U shaped cross member
provides good traction and excellent flotation. Suitable for small to
medium machines and works well in wet, soft and hilly terrain. Also
available with the new generation extended cross members for addi-
tional flotation, less ground disturbance and easier machine turning.
U
U
A track for all operating conditions. The U shaped cross member
provides good traction and excellent flotation. Suitable for small to
A track for all operating conditions. The U shaped cross member
medium machines and works well in wet, soft and hilly terrain. Also
provides good traction and excellent flotation. Suitable for small to
medium machines and works U-RUBBER
available with the new generation extended cross members for addi-
well in wet, soft and kumipinta.
hilly terrain. onAlso
tional flotation, less ground disturbance
U-tela, johon and easier machineMalli
on vulkanoitu turning.
kehitetty metsäkonei-
available with the new generation extended
siin, joilla joudutaancross members
metsässä for yhteydessä
työskentelyn addi- usein ylitt-
U
tional flotation, less ground disturbance
U-RUBBER
and easier machine turning.
ämään asfalttiteitä.
PRO
Edullinen yleistela monitoimikoneisiin ja max. 14 tonnia painaviin
82
kuormatraktoreihin. Hyvä kantavuus ja pidennetyn telakenkäjaon
ansiosta on telan puhdistuvuutta tehostettu.
TYRES, CHAINS, TRACKS
PRO
Edullinen yleistela monitoimikoneisiin ja max. 14 tonnia painaviin
kuormatraktoreihin. Hyvä kantavuus ja pidennetyn telakenkäjaon
ansiosta on telan puhdistuvuutta tehostettu.
PRO
The all-round track for harvesters and forwarders up to 14 tons. It is
ideal for thinnings. Equipped with a longer cross member partition for
better cleaning of snow and mud. The smooth cross member provides
protection of the ground, roots and brush mat.
Olofsfors Tracks
Description No.
ECO-Track
22 710 x 26.5 T422 W=795 0068673
One concept, a world standard for tracks.
Clearly the most popular track among N FR, F2, T428, 421,
26 600 x 26.5 0068655
A343 W=670
professionals! ECO-Tracks have become a
concept and a world standard for tracks. ECO- N FKF, F2, ELS, FR,
26 700/710 x 26.5 0063602
T428, A343 W=850
Tracks are a flexible track that is suitable for
N TRS, TRS 2, A344
almost all machine types and ground conditions. 26 700/710 x 26.5
W=790
0062216
The track provides excellent grip with good
flotation on most types of ground. 26 710 x 26.5 T422 W=795 0067968
22 600 x 26.5
N TRS, TRS 2, A344
0057991 ECO-SOFT
W=670
N FKF, ELS, A331, With the new generation of cross member.
22 700/710 x 22.5 0044439
W=765 Is a further development of our ECO-Track
N TRS, T428, A344 system that provides additional flotation on
22 700/710 x 22.5 0057150
W=778 sensitive ground, yet retains excellent grip
22 700/710 x 26,5
N FKF, F2, FR, T428,
0044435
for hilly terrain. The new shape of the cross
A343 W=765 member gives the machine a softer motion
22 700/710 x 26.5 N TRS, A344 W=795 0057992 among stumps and rocks and “protects” both
link systems and the surface layer of the
N FKF, F2, A343 ground.
22 710 x 24.5 0067376
W=765
83
Description No.
N FKF, F2, FR, T428, EVO 26 750 x 26.5 T428 W=870 0071135
22 700/710 x 26.5 A343, TiHF, FF, FsB 0076567
W=916
EVO 26 750 x 26,5 N F2 W=915 0076537
N FKF, F2, FR, T428,
26 700/710 x 26.5 A343, TiHF, FF, FsB 0062533 N FKF, TRS, A343,
W=916 EVO 26 750 x 26.5 0071134
344 Narrow W=775
N TRS, TRS 2, A344, EVO 26 780 x 26.5 N FKF & TRS2,
26 700/710 x 26.5 0065753 0074737
TiFG W=916 & 750/55 x 26,5 W=884
N ELS, FKF, TRS, N FKF, F2, FR, T428
26 750 x 26.5 0065713 EVO-Soft
A343, 344 W=916 A343, TiHF, FF, FsB 0071129
22 700/710 x 26.5
N FKF, F2, FR, ELS, W=906
KovaX-Soft
T428, A343, TiHF2, 0077312 EVO-Soft N TRS, TRS 2, A344,
26 700/710 x 26.5 0071131
FF, FsB W=903 26 700 x 26.5 TiFG W=906
N FKF, F2, FR, ELS, N FKF, F2, FR, T428
KovaX EVO-Soft
T428, A343, TiHF2, 0077313 A343, TiHF, FF, FsB 0071133
26 700/710 x 26.5 26 700/710 x 26.5
FF, FsB W=780 W=906
EVO-Soft N FKF, TRS, A343,
0070693
26 750 x 26.5 344 W=906
EVO-Soft
ECO-OF 26 780 x 26.5 &
N FKF & TRS2,
0075709
W=960
A track that can cope with steep, stony and 750/55 x 26,5
muddy terrain with very good results. ECO-OF’s EVO-Soft
N FKF W=960 0075781
26 800 x 26.5
self-cleaning properties make it also a very
popular track in tough snow conditions. N FKF, F2, FR, T428
EVO-M
A343, TiHF, FF, FsB 0072724
26 700/710 x 26.5
W=906
EVO-M N FKF, TRS, A343,
0072039
26 750 x 26.5 344 W=906
EVO-M
N F2 W=960 0076690
26 750 x 26.5
EVO-M
N FKF & TRS2,
26 780 x 26.5 & 0075339
W=915
750/55 x 26,5
EVO-M
N FKF & TRS2
26 780 x 26.5 & 0075710
W=960
750/55 x 26,5
EVO-M
N F2 Narrow W=850 0073030
26 780 x 28.5
EVO
Description No.
N ELS, T404, 423
22 600 x 22.5 0071124
W=740
84
TYRES, CHAINS, TRACKS
ECO-MAX
Is a track for really tough assignments and the
largest machines! The track has a shape that
provides a good grip in steep terrain and good
flotation on softer ground. With a new link system
and closer partition between the cross members,
this track has very low rolling resistance and very
good ground-friendly properties thanks to the
design of the cross members.
OF
Description No.
OF
N ELS W=725 0044438
22 600 x 22.5
OF N TRS, T428, A344
0058145
22 600 x 22.5 W=725
OF N FR, F2, T428,
0057837
22 600 x 26.5 A343 W=725
OF N TRS, TRS2, A344
0044441
22 600 x 26.5 W=725
OF
N FKF, A331 W=770 0060004
22 700/710 x 22.5
OF N TRS, T428, A344
0044483
22 710 x 22.5 W=850 MAX
N FKF, F2, FR, T428
OF
A343, TiHF, FF, FsB 0057660 Description No.
22 700/710 x 26.5
W=840
N FKF, F2, FR, T428,
OF N TRS, TRS 2, A344, MAX
0062617 A343, TiHF, FF, FsB 0065768
22 700/710 x 26.5 TiFG W=840 26 700/710 x 26.5
W=840
OF N FKF, F2, FR, T428,
T422 W=850 0072326 MAX
22 710 x 26.5 A343, TiHF, FF, FsB 0065374
26 700/710 x 26.5
OF W=916
N FKF W=725 0073175
26 600 x 26.5 MAX N FKF, TRS, A343,
0065769
OF N FR, F2, T428, 26 750 x 26.5 344 W=840
0067070
26 600 x 26.5 A343 W=725 MAX N FKF, TRS, A343,
0064984
OF N FKF, F2, FR, T428, 26 750 x 26.5 344 W=916
0065563
26 700/710 x 26.5 A343 W=840 MAX 26 780 x 26.5 N FKF & TRS2,
0070590
N FKF, TRS, A343, & 750/55 x 26,5 W=820
OF 26 750 x 26.5 0064911
344 W=840
ECO-BALTIC
A good choice for wet and sensitive ground and
for thinning operations.
The track for soft and sensitive ground and
KOVAX for careful thinning. The shape of the cross
member makes this track extremely suitable
Description No.
for driving on brush mats. The track “protects”
26 700/710 x 26.5 KovaX-Soft 0077312 the ground and roots thanks to its excellent
flotation.
26 700/710 x 26.5 KovaX 0077313
85
Description No.
EX 26 780/55 x
N FKF & TRS2,
26.5 & 750/55 x 0075721
W=905 mm
26,5
EX 26 780/55 x
N FKF & TRS2,
26.5 & 750/55 x 0075725
W=866 mm Narrow
26,5
EX 30 780 x 26.5 & N FKF &
0074693
750/55 x 26,5 TRS2,W=866
BALTIC
Description No.
Baltic N TRS, T428, A344
0062359
22 600 x 22.5 W=730 ECO-MAGNUM
Baltic Same advantages as ECO-Baltic, but slightly
N FKF, A331 W=750 0060333
22 700/710 x 22.5
improved. The track for extremely soft and
Baltic N TRS, T428, A344
22 700/710 x 22.5 W=770
0062360 sensitive ground and for careful thinning. The
wide shape of the cross member makes this
N FKF, F2, FR, T428,
Baltic track extremely suitable for driving on brush
A343, TiHF, FF, FsB 0066635
2 700/710 x 26.5
W=770 mats. The track “protects” the ground and
Baltic T422, Straight side roots thanks to its excellent flotation.
0070660
22 700/710 x 26.5 support, W=815
N FKF, F2, FR, T428,
Baltic
A343, TiHF, FF, FsB 0059822
26 700/710 x 26.5
W=770
Baltic N TRS, TRS 2, A344,
0062358
26 700/710 x 26.5 TiFG W=870
Baltic T422, Straight side
0070736
26 700/710 x 26.5 support W=870
N FKF, TRS, A343,
Baltic 26 750 x 26.5 0065804
344 W=770
N TRS 2, A344
Baltic 26 800 x 26.5 0076388
W=935
MAGNUM
Description No.
Magnum
N FKF, A331 W=916 0064761
22 700/710 x 22.5
N FKF, F2, FR, T428,
Magnum
A343, TiHF, FF, FsB 0064837
22 700/710 x 26.5
W=916
Magnum N FKF, F2, FR, T428,
0066636
22 700/710 x 26.5 A343 W=1020
EX Magnum N TRS, TRS 2, A344,
0072845
22 700/710 x 26.5 TiFG W=916
Description No.
N FKF, F2, FR, T428,
Magnum
N FKF, F2, FR, T428, A343, TiHF, FF, FsB 0068987
EX 22 700/710 x 26 700/710 x 26.5
A343, TiHF, FF, FsB 0069001 W=920
26.5
W=866 N FKF, F2, FR, T428,
Magnum
N FKF, F2, FR, T428, A343, TiHF, FF, FsB 0076568
EX 26 700/710 x 26 700/710 x 26.5
A343, TiHF, FF, FsB 0074675 W=1023
26.5
W=866 N FKF, F2, FR, T428,
Magnum
EX 26 750/55 x N FKF, TRS, A343, A343, TiHF, FF, FsB 0075007
0071400 26 700/710 x 26.5
26.5 344 W=866 ESK* W=1060
EX 26 750/55 x Magnum N FKF, TRS, A343,
N F2 W=905 mm 0076536 0064991
26.5 26 750 x 26.5 344 W=920
EX 26 750/45 x Magnum
T428 W=866 mm 0073164 N FKF W=1023 0076140
30.5 , 750/50-26,5 26 780 x 26.5
86
TYRES, CHAINS, TRACKS
ECO-U can cope with both wet and hilly ground. Description No.
Is the track that can cope with both wet and N FKF, F2, FR, T428,
hilly ground conditions. This track has cross Soft Ground Track
A343, TiHF, FF, FsB 0057000
22 700/710x26.5
members with a U-shaped profile, making them W=854
especially suitable for ground with a soft and
damp layer of soil.
STANDARD TRACKS
87
10 WHEEL TRACKS
Description No.
Clark tracks
Description No.
750/55-26.5 28 mm 850 mm
0076205
TL-8001875/28 FKF2
750/55-26.5 24 mm 820 mm
0071862
TL-800575/24 T428
750/55-26.5 28 mm 820 mm
0071865
TL-800575/28 T428
TERRA (TL-85)
Description No.
710/40-22.5 24 mm 740 mm
0071817
TL-800172/24 FKF
710/40-22.5 24 mm 740 mm
0071858
TL-800572/24 T428
710/40-24.5 24 mm 760 mm
0071820
TL-800174/24 FKF
710/40-24.5 24 mm 765 mm
0071859
TL-800574/24 T428
710/45-26.5 24 mm 765 mm TERRA (TL-95)
0069655
TL-800171/24 FKF
710/45-26.5 28 mm 765 mm Description No.
0068733
TL-800171/28 FKF 710/45-26.5 28 mm 765 mm
0071823
710/45-26.5 24 mm 770 mm TL-950171/28 FKF
0071860
TL-800571/24 T428 750/55-26.5 28 mm 785 mm
710/45-26.5 28 mm 770 mm 0071824
0071863 TL-950175/28 FKF
TL-800571/28 T428
710/45-26.5 28 mm 770 mm
710/45-26.5 24 mm 770 mm 0071866
0071861 TL-950571/28 T428
TL-800771/24 T422
710/45-26.5 28 mm 770 mm
710/45-26.5 28 mm 770 mm 0071868
0071864 TL-950771/28 T422
TL-800771/28 T422
750/55-26.5 28 mm 820 mm
750/55-26.5 0071869
24 mm FKF 0071821 TL-950575/28 T428
TL-800175/24
750/55-26.5 28 mm 785 mm 750/55-26.5 28 mm 850 mm
0071822 0076202
TL-800175/28 FKF TL-9501875/28 FKF2
88
TYRES, CHAINS, TRACKS
W ULTIMATE
NE SITE CONFIDENCE
WEB
ACK
FIND
YOU
R PE
rac
RFEC
T TR
ks.co
m IN ALL TERRAINS
larkt
www.c MACHINES, SEASONS
Flotation Multi-Terrain Demanding Temperate Ice Snow Forwarder Harvester
www.clarktracks.com
E: clarktracks@clarktracks.com T: +44 (0) 1387 722370
CLARK TRACKS
high performance for maximum work life
Description No.
750/55-26.5 28 mm 785 mm
0071872
GL-600175/28 FKF
710/40-22.5 24 mm 740 mm
0071873
GL-600572/24 T428
710/40-24.5 24 mm 785 mm
0071830
GL-600574/24 T428
710/45-26.5 24 mm 770 mm
0071874
GL-600571/24 T428
710/45-26.5 24 mm 770 mm
0071832
GL-600771/24 T422
GROUZER GL84 710/45-26.5 28 mm 770 mm
0071875
GL-600571/28 T428
Description No.
710/45-26.5 28 mm 770 mm
0071876
710/40-22.5 24 mm 740 mm GL-600771/28 T422
0071825
GL-600172/24 FKF 750/55-26.5 28 mm 820 mm
0071833
710/40-24.5 24 mm 760 mm GL-600575/28 T428
0071870
GL-600174/24 FKF 750/55-26.5 28 mm 850 mm
0071877
710/45-26.5 24 mm 765 mm GL-6001875/28 FKF2
0071826
GL-600171/24 FKF
750/55-26.5 24 mm 785 mm
0071871
GL-600175/24 FKF
710/45-26.5 28 mm 765 mm
0071827
GL-600171/28 FKF
89
PATENT
PENDIN
G
Haggis Link
C-Link
C-Link
HAGGIS LINKS
ARE AVAILABLE
AS AN UPGRADE
TO ALL 28mm Haggis Link
CLARK TRACKS
www.clarktracks.com
E: clarktracks@clarktracks.com T: +44 (0) 1387 722370
CLARK TRACKS
high performance for maximum work life
TYRES, CHAINS, TRACKS
Description No.
750/55-26.5
24 mm FKF 0071846
TXL-850175/24
710/45-26.5 28 mm 785 mm
0071848
TXL-850171/28 FKF
750/55-26.5 28 mm 785 mm
0071849
TXL-850175/28 FKF
710/40-22.5 24 mm 740 mm
0071887
TXCL TXL-850572/24 T428
710/40-24.5 24 mm 765 mm
Description No. 0071888
TXL-850574/24 T428
710/40-22.5 24 mm 740 mm 710/45-26.5 24 mm 765 mm
0071834 0071889
TXCL-885172/2 FKF TXL-850571/24 T428
710/40-24.5 24 mm 770 mm 710/45-26.5 24 mm 770 mm
0071835 0071890
TXCL-885174/2 FKF TXL-850771/24 T422
710/45-26.5 24 mm 785 mm 750/55-26.5
0071836 24 mm T428 0071891
TXCL-885171/2 FKF TXL-850575/24
750/55-26.5 710/45-26.5 28 mm 765 mm
24 mm FKF 0071840 0071893
TXCL-885175/2 TXL-850571/28 T428
710/45-26.5 28 mm 785 mm 710/45-26.5 28 mm 770 mm
0071841 0071894
TXCL-885171/2 FKF TXL-850771/28 T422
750/55-26.5 28 mm 785 mm 750/55-26.5 28 mm 755 mm
0071842 0071895
TXCL-885175/2 FKF TXL-850575/28 T428
710/40-22.5 24 mm 770 mm 750/55-26.5 28 mm 800 mm
0071879 0076204
TXCL-885572/2 T428 TXL-8501875/2 FKF2
710/40-24.5 24 mm 765 mm
0071880
TXCL-885574/2 T428
710/45-26.5 24 mm 765 mm
0071881
TXCL-885571/2 T428
710/45-26.5 24 mm 770 mm
0071882
TXCL-885771/2 T422
750/55-26.5
24 mm T428 0071883
TXCL-885575/2
710/45-26.5 28 mm 765 mm
0071884
TXCL-885571/2 T428
710/45-26.5 28 mm 770 mm
0071885
TXCL-885771/2 T422
750/55-26.5 28 mm 755 mm
TXCL-885575/2 T428
0071886 ROCKY (RL-50)
750/55-26.5 28 mm 800 mm Description No.
0076203
TXCL-8851875/ FKF2
710/45-26,5 24 mm 765 mm 710/40-22.5 24 mm 775 mm
0076357 0071850
TXCL-8851871/ FKF2 RL-555172/24 FKF
TXL
91
Track accessories
Clark
JL-22-95 00625541
JL-24-160 0070470
JL-28-105 0071248
JL-28-160 0071249
Olofsfors
45X35X20, Slide stopper set 80 pcs 006470580
Track joint 18X85 0028696
50x30x35 EVO 0072429
Track joint 18X135 0028688
65x50x25 0067627
Track joint 22X90 0028712
50x40x32 CLARK 0071053
Track joint 22X135 0028704
Track joint screw 0068786
Track joint 26x105 0067971
Eco-Track widening piece,
0071657
Track joint 26x155 0067972 welded
Connecting piece for track joint,
00287121
22 mm
Connecting piece for track joint,
00679711
26 mm
Olofsfors
22x49,5x51,5 0067969
26x51x55 0067970
92
TYRES, CHAINS, TRACKS
0070535
Contents:
1 pc Gear system 1 pc Case
1 pc Eco-Track T-jaw 1 pc Grease tube 60 g
1 pc Eco-Track threaded jaw 1 pc Cleaning brush
1 pc Eco-OF T-jaw 2 pcs Bolt M20x50 Eco-Of
1 pc Eco-OF threaded jaw 1 pc Extension
1 pc Eco-Baltic T-jaw 1 pc Drawing hook pair
1 pc Eco-Baltic threaded jaw
Description No.
Eco-Track/Soft 0061822
Eco-OF/Max 0061823
Eco-L 0061824
Eco-U/Wide 0058348
Eco-Baltic/Magnum 0061826
HAVEL TRACK TENSIONER
ECO-Max-Magnum 0067120
Description No.
Combination track 0061825
Mechanical track tensioner ST0351
Description No.
CHECK THE TENSION OF THE TRACKS
Dimension A
must be approximately 50 mm (2”).
93
Harvester Products
Flange damages......................................................... 95 Measuring wheels...................................................... 110
Saw bars and accessories.......................................... 96 H60 / H73e.................................................................110
Saw Bars......................................................................96 H53 and H73................................................................110
Sprockets......................................................................97 H7/H8.........................................................................110
Sharpening angles..........................................................97 Measuring wheel package................................................110
Saw bar fastening...........................................................97 Support wheels H60.......................................................111
Saw chain reel...............................................................98 support roller assemblies.................................................111
Saw chain per piece........................................................98 Bearings................................................................... 111
Chain couplers...............................................................99 H60.............................................................................111
Saw chain maintenance...................................................99 H53/H73.....................................................................111
Saw chain lubrication pumps............................................100 H6/H7/H8...................................................................111
Vaseline lubrication.........................................................100 H5 ...............................................................................111
Stump treatment pumps..................................................100 Bushing sets..................................................................112
Harvesterhead o-ring sets................................................100 Rubber pads..................................................................112
Electric connector kit, H-series harvesterheads...................100 Springs.........................................................................112
Harvester head cylinders and seal sets........................ 101 Chains..........................................................................112
H60e /bw 64001..........................................................101 Sharpening of the delimbing knives.............................. 113
H60 60001..................................................................101 Delimbing knives........................................................ 113
H53 53001..................................................................102 Measuring tool...............................................................113
H53e 54001.................................................................102 H60/H60e...................................................................113
H73 73001..................................................................102 H53.............................................................................114
H73e 74001.................................................................103 H73 / H73e.................................................................114
H5 480001..................................................................103 Rear Knives H73e ......................................................114
H6 670001..................................................................104 H5 ...............................................................................114
H7 770001..................................................................104 H6 ...............................................................................114
H7 760001..................................................................104 H8 ...............................................................................115
H8 830001..................................................................105 H7 & H7Euca................................................................115
H8 840001..................................................................105 Upper Knife...................................................................115
EH25 300001-..............................................................105 Front Knives..................................................................115
Sensors.................................................................... 106 Rear Knives H7 / H7Euca...............................................115
H60/H60e...................................................................106 Colour marking parts......................................................115
H53/H73.....................................................................106 Bottom wear plate..........................................................116
How to connect sensors............................................. 106 Log guide plate...............................................................116
H73e............................................................................107 Feed motors..................................................................116
H5 / H6 / H7 / H8......................................................107 PONSSE CT+ chain tensioner package................................116
Multipole cables.............................................................107 Saw motors...................................................................117
Sensor tester.................................................................107 Planetary gears..............................................................117
Terminal blocks..............................................................108 Slewing motors..............................................................117
3-Way valves..................................................................108
O-ring below valve...........................................................108
Saw operating valve, new model........................................108
Flow distribution cartidge.................................................109
Rotating connector.........................................................109
Rotating connector, Taimi.................................................109
BSP..............................................................................109
ORFS............................................................................109
Rotating connector, Indexator...........................................109
94
HARVESTER PRODUCTS
Flange damages
DAMAGE:
Cracking in the chain groove,
excessive wear of the chain groove
behind the end wheel
CAUSE/REASON:
Loose chain
DAMAGE:
Burnt flange tip, broken end wheel
CAUSE/REASON:
Chain too tight
DAMAGE:
Burn marks around rivets; broken/worn,
jammed end wheel
CAUSE/REASON:
Overheat in bearings, clogged oil channel
DAMAGE:
Burn marks on the flange frame
CAUSE/REASON:
Flattened knife groove,
clogged oil channel
95
Saw bars and accessories
Saw Bars
96
HARVESTER PRODUCTS
SPROCKETS
10 0036755 0044350
11 0036747 0044353
12 0036748 0044352
14 *P11710 0061874
15 0061872 0036744
16 P13252
17 230713 0061873
Nordlock 0060177
97
No. of links OREGON 2.0 mm
76 00390731
86 0066485
87 00390732
89 00390733
SAW CHAIN REEL
No. of links STIHL 2.0 mm
Description PONSSE
76 0064745
2.0 mm 0065976
77 0065243
2.0 mm HX 0067866
Description STIHL
87 0062088
2.0 mm 0061425
88 0065244
90 0062749
94 0062087
95 0064747
97 0064748
100 0066488
76 0067863
77 0067884
78 0067864
79 0067885
87 0067886
88 0067865
89 0067887
90 0067888
97 0067867
98
HARVESTER PRODUCTS
0070509
0043951
Male 0061130
Chain splitter 0044340
Female 0066910
Mandrel 0043995
Description OREGON 18x
Chain splitter anvil 0060974
Male 0066563
Riveter 0044330
Female 0066910
Riveter anvil 0043996
Description STIHL 1.6 ja 2.0 mm
Male 0064878
Arm return spring 0043951
99
SAW CHAIN LUBRICATION PUMPS STUMP TREATMENT PUMPS
Opti oil, with stronger spring 0063191 Stump treatment piston pump P19775
Spring 0026255
Description No.
Connector set,
0070091
H-series harvester heads, incl. Pliers
100
HARVESTER PRODUCTS
H60 60001
101
Function Frame No. Cyliner Seal set
H53 53001
Front knives 2 pcs 1–82, >90<, >92<, >94<, >98< 0047339 00473391
Rear knives 1 pcs 1–82, >90<, >92<, >94<, >95<, >98< 0047341 00473411
H53e 54001
H73 73001
102
HARVESTER PRODUCTS
H73e 74001
H5 480001
103
H6 670001
H7 770001
H7 760001
6- P43781 0071049
104
HARVESTER PRODUCTS
H8 830001
H8 840001
8- P43781 0071049
EH25 300001-
105
Sensors
H60/H60e H53/H73
Length sensor hall 25 pulses 0061188 Saw sensor with wire 0067649
Length sensor hall 75 pulses 0068321 Saw sensor intermediate cable 0070361
106
HARVESTER PRODUCTS
Measuring sensor
0061160 6-pole, 110 Ohm 0062606
housing grease
H5 / H6 / H7 / H8
Description No.
NOTE!
Ask the Parts Salesperson to check
the suitably of the sensor.
107
3-WAY VALVES
Description No.
TERMINAL BLOCKS
O-RING BELOW VALVE
Description No.
Description No.
4.0 mm, grey 0056172
Nylon 00571701
2.5 mm, blue 0017305
90 shore 0057170
1.5 mm, red 0017307
70 shore 0038185
1.0 mm, yellow 0017310
End sleeve bag, ARCNET Containing SAW OPERATING VALVE, NEW MODEL
the tools and instructions required for
0072980 Description No.
connecting Arcnet cables. For cables
0061340 and 0062606.
Saw operating valve, large 0038208
108
HARVESTER PRODUCTS
Description No.
ROTATING CONNECTOR
Description No.
ROTATING CONNECTOR, INDEXATOR
1 inch 0047860
Description No.
1/2’’ 0062883
3/4" 0062410
1" 0047860
1 1/4” 0066914
BSP
Description No.
109
Measuring wheels
H7/H8
Description No.
H60 / H73e
Gear ring P19254
Description No.
Description No.
H6 / H7 / H8 0067712
Double row, low spike 230557
Welded P16297
110
HARVESTER PRODUCTS
Bearings
H53/H73
SUPPORT ROLLER ASSEMBLIES Description No.
H6/H7/H8
Description No.
H5
Description No.
0016140
For measuring wheel
0016071
111
BUSHING SETS SPRINGS
CHAINS
Description No.
For cradle H60, H53, H73 0026977 For diameter sensor, 23 links 0043132
For cradle H60, thick 0026972 For diameter sensor, 27 links 230255
112
HARVESTER PRODUCTS
Sharpening of the delimbing knives
Delimbing knives
Front
Short bow
Knives
113
REAR KNIVES H73E
Description No.
Upper
Welded, New Model P17256
Knife
Support
For upper knife P17256 P16918
plate
Front
Cast, left AM00274
Knives
H5
Description No.
Upper
Bolt-on, welded, 480001-6 P35622
Knife
Front
Casted, left, 480016- AM02938
Knives
114
HARVESTER PRODUCTS
H7 & H7EUCA
Upper Knife
Description No.
Bolt-on, welded, Euca 780001- P38196 Compressed air, colour 2 holes 220258
Right Casted, Euca 780014- AM02393 For disconnecting the colour marking valve ST0022
block’s check valve
Left Casted, Euca 780014- AM02394
115
TMT
Description No.
Description No.
OMVW
Description No.
Description No.
REXROTH
H60 left P18011
Rexroth MCR05
H60 right P18012
Description No.
H60e left P18067
520 H6/H7 Euca Side engine 0066769
H60e right P18068
620 H7/H8 Side engine 0072340
116
HARVESTER PRODUCTS
Key 0043293
Description No.
SLEWING MOTORS
CT+ Parker F12-030 0074368
Description No.
117
PONSSE
ACTIVEFRAME
is now available for
the PONSSE Ergo 8w
harvester!
PONSSE ACTIVEFRAME
Crane Products
Crane Seal Sets......................................................... 120
HN200 ->20012,27013->............................................... 120
HN125 25001-.............................................................. 120
C22 340001-................................................................. 121
C33 260001.................................................................. 121
C44 350001-................................................................. 122
C55 290001.................................................................. 122
C2 320001.................................................................... 123
C4 310001.................................................................... 123
C6 360001-................................................................... 123
C50 C010001................................................................ 124
K75 75001.................................................................... 124
K70 70001.................................................................... 124
K70+ 710001................................................................ 125
K80 80001-................................................................... 125
K90 90001-................................................................... 126
K90+ 910001................................................................ 126
K90 Dual 920001-.......................................................... 126
K90Dual+ 970001.......................................................... 127
K100 930001-............................................................... 127
K100+ 940001.............................................................. 127
Glide pad sets............................................................ 128
For harvester cranes....................................................... 128
For forwarder cranes....................................................... 128
Complete chain sets.................................................... 128
For harvester cranes....................................................... 128
For forwarder cranes....................................................... 128
Rotators.................................................................... 128
Indexator for forwarders................................................... 128
Indexator for harvesters................................................... 129
Compatibility chart of rotators and swing dampers........ 129
Compatibility chart of rotators and swing dampers........ 131
Grapples.................................................................... 131
PONSSE SG grapples........................................................ 131
PONSSE grapples............................................................ 131
Vahva............................................................................. 132
PONSSE SG energy wood grapples..................................... 132
PONSSE energy wood grapples.......................................... 132
Hultdins......................................................................... 132
Loglift............................................................................ 132
Cranab........................................................................... 132
Grapple bushing sets........................................................ 132
119
Crane Seal Sets
HN200 ->20012,27013->
HN125 25001-
120
CRANE PRODUCTS
C22 340001-
C33 260001
121
C44 350001-
C55 290001
122
CRANE PRODUCTS
C2 320001
C4 310001
2- P24652 NH43687-05
Base tilting 2 pcs (Beaver, Ergo) >52<, 123–125, 127- P26881 NH43687-05
Base tilting 2 pcs (Ergo 20°) >262<, >299<, 331- P34253 NH43687-05
45- P24917
C6 360001-
123
Function Frame No Cylinder Seal Set
C50 C010001
K75 75001
K70 70001
124
CRANE PRODUCTS
K70+ 710001
K80 80001-
125
Function Frame No Cylinder Seal Set
6- 290224 NH28265-05
K90 90001-
K90+ 910001
126
CRANE PRODUCTS
K90Dual+ 970001
K100 930001-
K100+ 940001
127
Glide pad sets Complete chain sets
C2 320001–320089,
0071491
C4 310001–310626
C2 320090–320091,
FOR FORWARDER CRANES
0073292
C4 31627–31641
Description No.
C2 320092➠, C4 31642➠ 0073293
K70M AM01614
C55 0071411
K70M+ AM01608
C5 0077007
K80M AM02122
C6 0077008
K90M, K90DUAL AM02122
C22, C33 0071410
K100M AM02122
C22+ C44, C44+, C50 0073183
K75 AM01624
Description No.
Rotators
K80M, K90M, K100M 0063211
K70M+ 0077010
Description No.
GV12-2 0068190
128
CRANE PRODUCTS
BLACK BRUIN
Description No.
BBR15F 0068390
AV12S 0068182
AV14SA 0068183
Swing 80/100
Swing 80/100
Swing 80/80
Dual Swing
0033242
0060352
0062853
MPB1-80
0056253
210068
D45/35
D45/45
D45/45
80/100
0068181 GV12S X X
0068185 G121 X
0068187 GV12S-2 X X
Rotator
0068190 GV12-2 X
0033670 MR8AF
0056174 MR10AF
0033671 MR8AMF X
0033665 MR10AMF X
129
High performance
during long time
Indexator’s rotators contribute to a high level of productivity and good total economy. They are compact
and robust – the materials and components are carefully selected. The rotators are equipped with heavy
duty bearings and are hydraulically balanced, which gives them long service intervals and long lifetime.
indexator.com
130
CRANE PRODUCTS
Dual Swing
0048086
0048072
0060442
0063004
0065515
MPB2-2
D45/35
D45/45
D45/45
MPB2
0068182 AV12S X X
0068183 AV14SA X X
0068184 H122 X
0068186 H172 X X
0068188 AV17S X X
0068189 H132 X X
0033670 MR8AF
0056174 MR10AF
0033671 MR8AMF X
0033665 MR10AMF X
Grapples
PONSSE GRAPPLES
Description No.
25 0062551
28 0057847
28 HD 0061783
35 0058689
35 HD 0060611
PONSSE SG GRAPPLES
40 0061508
Description No.
55 0061509
PONSSE SG260 LP 0067170
131
VAHVA
Description No.
Description No.
PONSSE SG ENERGY WOOD GRAPPLES
FORTE G28 0060874
Description No.
FORTE G36 0060870
PONSSE SG260R LP 0067185
Description No.
025R 0062666
028R 0062667
035R 0062668
040R 0062669
SG II 260A 0068305
HULTDINS 360S 0066912
SG II 300A 0068306
HSP 028 0065965
SG II 360A 0068139
HSP 035 0065965
SG II 420A 0068307
HSP 035HD 0066671
LOGLIFT
Description No.
FX 26 0062762
FX 36 0062753
132
HYDRAULICS ACCESSORIES
Hydraulics accessories
Hydraulic fittings....................................................... 135 T-fittings................................................................... 143
Indicating the sizes of fittings..................................... 135 R1/4”..........................................................................143
Double fitting..................................................................136 R3/8”..........................................................................143
Connecting fitting............................................................136 R1/2”..........................................................................143
Lead through fitting.........................................................136 R3/4”..........................................................................143
Turning angular fitting......................................................136 R1”..............................................................................143
Reducing fitting..............................................................136 T-turning T-fittings..................................................... 144
Extension fitting..............................................................136 R1/4”..........................................................................144
Angle fitting...................................................................136 R3/8”..........................................................................144
T-fitting..........................................................................136 R1/2”..........................................................................144
T-turning T-fitting.............................................................137 R3/4”..........................................................................144
RSI-fitting.......................................................................137 R1”..............................................................................144
Measuring fitting............................................................137 R11/4”........................................................................144
Muff.............................................................................137 R11/2”........................................................................144
Male plug......................................................................137 RSI-fittings................................................................ 144
Female plug...................................................................137 R1/8”..........................................................................144
Quick connector.............................................................137 R1/4”..........................................................................144
Double fittings........................................................... 138 R3/8”..........................................................................145
R1/8”..........................................................................138 R1/2”..........................................................................145
R1/4”..........................................................................138 R3/4”..........................................................................145
R3/8”..........................................................................138 R1”..............................................................................145
R1/2”..........................................................................138 R11/4”........................................................................145
R3/4”..........................................................................138 R11/2”........................................................................145
R1”..............................................................................139 R2”..............................................................................145
R11/4”........................................................................139 ORFS-fittings............................................................. 145
R11/2”........................................................................139 Double fittings................................................................145
R2”..............................................................................139 Connecting fittings..........................................................145
Connecting fittings..................................................... 139 Reducing fittings.............................................................146
R1/8”..........................................................................139 Lead through fitting.........................................................146
R1/4”..........................................................................139 Angle fitting...................................................................146
R3/8”..........................................................................139 ORFS Turning angular fitting....................................... 146
R1/2”..........................................................................140 1/4”............................................................................146
R3/4”..........................................................................140 3/8”............................................................................146
R1”..............................................................................140 1/2”............................................................................147
R11/4”........................................................................140 3/4”............................................................................147
R11/2”........................................................................140 7/8”............................................................................147
Reducing fittings....................................................... 140 1” ...............................................................................147
R1/8”..........................................................................140 1 1/4”.........................................................................147
R1/4”..........................................................................140 1 1/2”.........................................................................147
R3/8”..........................................................................140 M16X1,5......................................................................147
R3/4”..........................................................................140 M18X1,5......................................................................147
R1/2”..........................................................................141 T-fittings........................................................................147
R1”..............................................................................141 T-turning L-fittings...........................................................147
R11/4”........................................................................141 Nominal sizes of ORFS connectors and corresponding
Extension fittings....................................................... 141 UNF threads..................................................................148
R11/4”........................................................................141 Measuring fittings..................................................... 148
Lead through fitting................................................... 141 Measuring fitting............................................................148
R1/4”..........................................................................141 Straight.........................................................................148
R3/8”..........................................................................141 45°..............................................................................148
R1/2”..........................................................................141 90°..............................................................................148
R3/4”..........................................................................141 Adjustment nipple M6-M12..............................................148
Angle fitting.............................................................. 142 Female plug...................................................................148
R1/4”..........................................................................142 Male plug......................................................................149
R3/8”..........................................................................142 Muff.............................................................................149
R1/2”..........................................................................142 Quick connector.............................................................149
R3/4”..........................................................................142 Grease nipples...............................................................149
R1”..............................................................................142 Usit Seal ring.................................................................150
Turning angular fitting................................................ 142 Usit Seal ring set (25 pcs)...............................................150
R1/4”..........................................................................142 Hose shield....................................................................150
R3/8”..........................................................................142
R1/2”..........................................................................143
R3/4”..........................................................................143
R1”..............................................................................143
R11/4”........................................................................143
R11/2”........................................................................143
133
HigH Quality
tecHnology
HigH Quality
tecHnology
For decades, Hytar oy has been a remarkable manufacturer and importer of components and
systems of oil and water hydraulics.
For decades, Hytar oy has been a remarkable manufacturer and importer of components and
systems of oil and water hydraulics.
Hose assemblies
Hose assemblies
Wire braided
hoses and
Wire braided
spiral hoses
hoses and
spiral hoses
Piping accessories
Piping accessories
BSB-, JIC-,
ORFS-fittings
BSB-, JIC-,
and adaptors
ORFS-fittings
and
Tubeadaptors
fittings
Tube fittings
Hydraulic fittings
Using original Ponsse hydraulic fittings, you can ensure that the original dimensions remain un-
changed in challenging sites. When designing connections and routes, minimised flow losses are
taken into consideration in addition to reliability and installation. By using Ponsse fittings and hos-
es, you can secure flexible routing and easy installation.
Fittings intended for specific sites guarantee the tightness and reliability of the hydraulics.
Example 1 Example 2
Turning T-FITTING:
R3/4U-R3/4S/SU-R3/4U Forged 90° angle fitting:
R3/4U ➔ R = R-thread, 3/4 = 3/4 inches, R1/4U-R1/4S 90° T
U = external thread
R1/4S 90° T ➔ R = R-thread, 1/4 = 1/4 inches,
R3/4S/SU ➔ R = R-thread, 3/4 = 3/4 inches, S = internal thread,
S = internal thread, /SU = turning 90° = 90° angle fitting,
T = forged.
135
DOUBLE FITTING REDUCING FITTING
• The thread type may vary, but the nominal size of • An external thread at both ends
both ends is the same. • Always a different thread size at both ends.
• Always an external thread at both ends.
• Lead through fittings differ from standard fittings • The fitting is forged if the final letter is T.
in terms of length. • The BSPT indication which replaces the thread
type marking refers to a cone-like BSP thread.
• The /SU indication refers to the branch where • The second indication refers to the size of the
the fitting can be turned using a tightening nut. centre branch.
• Example: R3/8U-R3/8U-R3/8U
136
HYDRAULICS ACCESSORIES
• The second indication refers to the size of the • Male plugs always have external threads.
centre branch. • There are two types of male plugs: Allen and hex
• The /SU indication refers to the branch where head plugs
the fitting can be turned. • In the size description, the ALLEN indication refers
to an Allen plug and the HEX HEAD indication refers
to a hex head plug.
RSI-FITTING
MEASURING FITTING
QUICK CONNECTOR
MUFF
137
Double fittings Size No.
R3/8-M14X1.5 0015733
R3/8-BSPT3/8 0015511
R1/2”
Size No.
R1/2-R1/2 0015842
R1/2-U9/16JIC 0000356
R1/8”
R1/2-U7/8JIC 0058340
Size No.
R1/2-M26X1,5 0015732
R1/4”
R1/2-M22X1,5 0058267
Size No.
R1/2-M20X1.5 0015739
R1/4-R1/4 0015735
R1/2-M18X1.5 0022643
R1/4-U9/16JIC 0021956
R1/2-M16X1,5 0060167
R1/4-U7/16JIC 0015719
R1/2-BSPT1/2 0015834
R1/4-M16X1,5 0015736
R3/4-R3/4 0015479
R3/8”
R3/4-U3/4JIC 0034181
Size No.
R3/4-U15/16JIC 0065252
R3/8-R3/8 0015503
R3/4-U13/16JIC 0058343
R3/8-U9/16JIC 0015727
R3/4-U11/16 JIC 0067144
R3/8-U7/8JIC 0055299
R3/4-NPTF3/4 0015867
R3/8-U7/16JIC 0065245
R3/4-M26X1.5 0041520
R3/8-U1/2JIC 0034199
R3/4-BSPT3/4 0015487
R3/8-NPTF3/8 0015776
R3/4-11/16JIC 0015859
R3/8-M20X1,5 0015738
R3/8-M18X1.5 0015737
R3/8-M16X1,5 0015740
138
HYDRAULICS ACCESSORIES
R1-R1 0033019
R1-U15/8JIC 0065253
R1-U15/16JIC 0015438
R1-U11/16JIC 0000359
R1-NPTF1 0015446
R1/8”
Size No.
R11/4”
R1/8U-R1/4S 0015633
Size No.
R1/8U-R1/8S 0015634
R11/4-R11/4 0033020
R11/4-U15/8JIC 0015439
R1/4”
R11/4-U15/16JIC 0000339 Size No.
R1/4U-R1/8S 0015586
R11/2”
R1/4U-R1/4S 0015750
Size No.
R1/4U-R3/8S 0015578
R11/2-R11/2 0033025
R1/4U-U7/16S 0000326
R11/2-U17/8JIC 0022046
R1/4U-R1/2S 0000068
R3/8”
Size No.
R3/8U-R1/4S 0015560
R3/8U-R3/8S 0015768
R3/8U-ORFS3/8S 0058854
R3/8U-R1/2S 0015552
R3/8U-U9/16S 0000376
139
R1/2” Reducing fittings
Size No.
R1/2U-R1/4S 0010263
R1/2U-R3/8S 0010264
R1/2U-R1/2S 0015826
R1/2U-R3/4S 0015529
R3/4”
R1/8-R1/4 0015636
R3/4U-U11/16S JIC 0065821
R3/4U-R3/4S 0015495
R1/4”
R3/4U-R1S 0015602 Size No.
R1/4-R1/2 0015644
R1”
R1/4-U3/4 JIC 0000391
Size No.
R1/4-U3/4 0015720
R1U-R3/4S 0044170
R3/8-U3/4JIC 0000354
R11/4”
R3/8-U3/4 0015721
Size No.
R11/4U-R1S 0000072
R3/4”
R11/4U-R11/4S 0044175 Size No.
R3/4-M22X1,5 0064990
R11/2”
R3/4-U7/8JIC 0015729
Size No.
R3/4-U11/16 0022055
R11/2U-R11/4S 0055160
R3/4-U15/16 0022054
R11/2U-R11/2S 0000077
R3/4-U15/16JIC 0015862
140
HYDRAULICS ACCESSORIES
Size No.
Lead through fitting
R3/4-R1 0015693
R3/4-R11/4 0024414
R3/4-R11/2 0034231
R1/2”
Size No.
R1/2-RK3/8 0015628
R1/4”
R1/2-R3/4 0015677
Size No.
R1/2-U3/4JIC 0015818
R1/4-R1/4 STRAIGHT 0021990
R1/2-R1 0015685
R1/4SU-R1/4 90° 0055123
R1”
R3/8”
Size No.
Size No.
R1-R11/4 0015701
R3/8-R3/8 STRAIGHT 0021991
R1-R11/2 0024406
R3/8SU-R3/8 90° 0063731
R11/4”
R1/2”
Size No.
Size No.
R11/4-R11/2 0015702
R1/2-R1/2 STRAIGHT 0042000
Extension fittings
R3/4”
Size No.
R11/4”
Size No.
R1/4-R1/4 0015784
R3/8-R3/8 0015743
R1/2-R1/2 0015792
R3/4-R3/4 0055053
R1-R1 0022648
141
Angle fitting R1”
Size No.
Turning
R1/4”
angular fitting
Size No.
R3/8”
Size No.
Size No.
R3/8U-R3/8S 90° T 0048259
R1/4U/SU-R1/4U 45° 0015519
R3/8U-R3/8U 90° 0015883
R1/4U/SU-R3/8U 45° 0015520
Size No.
R3/8”
R3/4U-R3/4S 45° T 0033005
Size No.
R3/4U-BSPT3/4U 90° 0035857
R3/8U/SU-R3/8U 45° 0015521
142
HYDRAULICS ACCESSORIES
Size No.
R11/2”
R3/8U/SU-U9/16U 90° 0000393
Size No.
R1/2” T-fittings
Size No.
Size No.
R1/2U/SU-U3/4U 90° 0000379
R1/4U-R1/4U-R1/4U 0015909
R1/2U/SU-U7/8U 90° 0066970
R3/8”
R3/4”
Size No.
Size No.
R3/8U-R3/8U-R3/8U 0015917
R3/4U/SU-U11/16U 45° 0065268
R3/8U-BSPT3/8U-R3/8U 0033011
R3/4U/SU-R3/4U 45° 0057185
R1/2U-BSPT1/2U-R1/2U 0033012
R1”
R1U-R1U-R1U 0033001
R11/4”
Size No.
143
T-turning R3/4”
T-fittings Size No.
R3/4S/SU-R3/4U-R3/4U 0057358
R3/4U/SU-R3/4U-R3/4U 0057773
R3/4U-R3/4U/SU-R3/4U 0044787
R1”
Size No.
R1U/SU-R1U-R1U 0059105
R1/4”
R1/4U/SU-R1/4U-R1/4U 0015516
R11/4”
R1/4U/SU-U9/16U-U9/16UJIC 0067145
Size No.
R1/4U-R1/4U/SU-R1/4U 0044783
R11/2”
Size No.
R3/8”
R11/2U/SU-R11/2U-R11/2U 0059645
Size No.
R3/8S/SU-R3/8U-R3/8U 0055221
RSI-fittings
R3/8U/SU-R3/8U-R3/8U 0015517
R3/8U/SU-U9/16U-U9/16UJIC 0067148
R3/8U-R3/8S/SU-R3/8U 0055273
R3/8U-R3/8U/SU-R3/8U 0015514
R3/8S/SU-R3/8U-R3/8U 0065999
R1/2”
R1/2U/SU-U7/8JIC-U7/8JIC 0066971
R1/4”
R1/2U-R1/2U/SU-R1/2U 0015515
Size No.
144
HYDRAULICS ACCESSORIES
R3/8” R2”
R1/2”
Size No.
Size No.
CONNECTING FITTINGS
R1-R1/2 RSI 0044192
Size No.
R1-R3/4 RSI 0044190
ORFS1/4S-R1/4U 0071628
ORFS1/2S-R3/8U 0071751
R11/2”
145
Size No.
REDUCING FITTINGS
ORFS3/8U-ORFS3/8S 90° 0061935
Size No.
ORFS5/8-ORFS1/2 0067309
ORFS3/4-ORFS5/8 0072065
ORFS3/4-ORFS3/4 0062273
R3/8U/SU-ORFS 3/8 45° 0072624
ORFS1-ORFS1 0063515
R3/8U/SU-ORFS 9/16U 90° 0061959
146
HYDRAULICS ACCESSORIES
1/2” 1 1/4”
1 1/2”
R1/2U/SU-ORFS 1 3/16U 90° 0071902
Size No.
ORFS1/4U-ORFS1/4U-ORFS1/4U 0061944
7/8”
ORFS3/8U-ORFS3/8U-ORFS3/8U 0071632
Size No.
ORFS3/8U-ORFS3/8S-ORFS3/8U 0071633
U7/8U/SU-ORFS3/4 45° 0072262
ORFS1/2U-ORFS1/2U-ORFS1/2U 0072711
ORFS1/2U-ORFS1/2S-ORFS1/2U 0072761
1”
Size No.
R1U/SU-ORFS 1 7/16U 45° 0061926
R1/4U/SU-ORFS1/4U-ORFS1/4U 0061960
R1U/SU-ORFS 1 7/16U 90° 0061977
R3/8U/SU-ORFS3/8U-ORFS3/8U 0063433
ORFS1U-U1 5/16U/SU 90° 0072210
147
Size No.
45°
R1/2U/SU-ORFS1/2U-ORFS1/2U 0061920
Size No.
R3/4U/SU-ORFS3/4U-ORFS3/4U 0071698
M6X1.00 0036145
R1U/SU-ORFS1U-ORFS1U 0061927
M8X1.00 0061078
M8X1.25 0026626
NOMINAL SIZES OF ORFS CONNECTORS AND
CORRESPONDING UNF THREADS KR1/8 0026618
Size UNF threads
MEASURING FITTING
Size No.
R1/8 0006807
FEMALE PLUG
R1/4 0006808
Size No.
R1/2 0036715
STRAIGHT
R1/4 0038780
Size No.
148
HYDRAULICS ACCESSORIES
MUFF
Size No.
R1/4 0040975
GREASE NIPPLES
R3/8 0040977 Size No.
M8X1.25 90 0026625
149
Size No.
1/8” 45 0026618
1/8” 90 0026617
HOSE SHIELD
Length
Description ∅ mm m
Colour No.
1/8 0024745
Hose shield 32 6 black 0021227
1/4 0017301
Hose shield 110 1 yellow 0021231
3/8 0017319
Hose shield 12 10 black 0058387
1/2 0017327
Hose shield 75 1 black 0061218
3/4 0017335
Hose shield 140 1 black 0061219
1 0017343
Hose shield 110 2,2 yellow 0061855
1 1/4 0017350
Hose shield 110 2,2 black 0065491
1 1/2 0017352
Hose shield 110 1 black 0065522
2 0060549
Hose shield 50 1 black 0065524
1 x 25 001734325
150
CENTRAL LUBRICATION SYSTEM PARTS
Central lubrication
system parts
Manual lubrication..........................................................152
Centralised lubrication.....................................................152
Pipe ends; spindles and sleeves................................... 152
For textile reinforced hose (1/8)......................................152
For thermoplastic hose (8/4)...........................................152
For steel reinforced hose (1/4)........................................152
Male connectors, male elbows.................................... 153
Male connectors............................................................153
Male elbows..................................................................153
Adjustable male elbow.....................................................154
T-unions,.......................................................................154
LE-unions.......................................................................154
Union connectors...........................................................155
Quick coupling body.........................................................155
Ferrules........................................................................155
Bulkhead unions.............................................................155
Connector nuts..............................................................155
Lengthening piece...........................................................156
Elbow nipple...................................................................156
Male connector smg.......................................................156
Double nipple.................................................................156
151
MANUAL LUBRICATION CENTRALISED LUBRICATION
Nipple set +
Grease gun head, LINCOLN 0029025 SM11800064
Crimping tool
Vaseline EP 1, 18 kg 0061307
Vaseline EP 2, 18 kg,
005678420
Operating temperature -30...+110 °C.
4-8 mm (8/4 hose) pressable sleeve SM11651070 8 mm (1/4” hose) threaded sleeve SM12651340
152
CENTRAL LUBRICATION SYSTEM PARTS
MALE CONNECTORS
a width d width
Product name No. across flats
b diameter c tube size
across flats
e thread
PEL 4 LL M 6 SM11643250 10 6 4 10 M6
b c
MALE ELBOWS
c width across
Product name No. a diameter b tube size d thread
flats
KKL 4 LL M 6 SM11643050 6 4 10 M6
153
ADJUSTABLE MALE ELBOW
T-UNIONS,
a
Product name No. b tube size c thread
width across flats
TEL 8 L SM11643430 17 8
LE-UNIONS
a
Product name No. b tube size c thread
width across flats
154
CENTRAL LUBRICATION SYSTEM PARTS
LÄL 6 L 0060134 6 12
LÄL 8 L SM11643150 8 17
a b
b width across
Product name No. a thread c diameter
flats
Product name No. a tube size b diameter Product name No. a tube size b diameter
Nut M 8 LL 0022493 8 14
155
LENGTHENING PIECE ELBOW NIPPLE
156
ELECTRICAL CONNECTORS
Electrical connectors
Harting connectors 1-10 pins..............................................158
Harting connectors 1-16 pins..............................................158
Harting connectors 1-24 pins..............................................159
Harting connectors 1-32 pins..............................................159
Control unit connectors......................................................160
IPS..................................................................................160
Knutsson..........................................................................160
Susmic 51........................................................................160
Optinet.............................................................................161
MB-Engine........................................................................161
Opticontrol........................................................................161
MB-Engine .......................................................................162
Amp-Connectors................................................................163
Deutsch-Connectors...........................................................164
157
Electrical connectors
We have compiled the connectors used in PONSSE forest machines under a single title. Using high-
quality connector bodies and conductor contacts, you can prevent the connections from coming loose
and the contact surfaces from oxidising, which could result in operational failures that are difficult to
identify. The correct contacts in the correct connector body guarantee resistance-free connectors for
years ahead.
Special pliers will be required for connecting conductor contacts to the conductor, depending on the
connector type. Ponsse offers special low-cost pliers for making high-quality connections, also in field
conditions.
158
ELECTRICAL CONNECTORS
159
Control unit connectors
IPS
0055837 - WHITE
KNUTSSON
0056779 0056780
SUSMIC 51
0057530 0057532
160
ELECTRICAL CONNECTORS
OPTINET OPTICONTROL
20 x 0056177
15 x 0058153
20 x 0057602
1 x 0056176
MB-ENGINE
MB - ADM2 - 12
MB - ADM2 - 15
161
MB-ENGINE
MB - ADM2 - 21
MINIDIAG
MB-PLD
162
ELECTRICAL CONNECTORS
AMP-CONNECTORS
0025822 0025821
10 x 0055941 10 x 0055943
163
DEUTSCH-CONNECTORS
0064940 / 0.5 - 1.0 mm2 golden, male 0064941 / 0.5 - 1.0 mm2 golden, female
0064724 / 0.75 - 1.5 mm2 male 0064723 / 0.75 - 1.5 mm2 female
0064722 / 1.5 - 2.5 mm2 male 0064721 / 1.5 - 2.5 mm2 female
164
ELECTRIC SWITCHES
Electric switches
Switches......................................................................166
Helicopter switch..........................................................167
Circuit boards..............................................................167
Push-buttons................................................................167
Others.........................................................................168
PONSSE Comfort user interface....................................171
Ball handles, harvester...................................................... 171
Mini handles, harvester..................................................... 171
Mini handles, forwarder..................................................... 171
165
Switches
Description Description
3 POS ROCKER SWITCH, ON-OFF-ON 3 POS ROCKER SWITCH, INDICATOR LIGHT, OFF-ON-ON
Description Description
2 POS ROCKER SWITCH, INDICATOR LIGHT, OFF-ON 2 POS ROCKER SWITCH, INDICATOR LIGHT, OFF-ON
Description Description
3 POS RETURN ROCKER SWITCH, <ON>-OFF-<ON> 3 POS RETURN ROCKER SWITCH, <ON>-OFF-<ON>
SWITCH 0025992
Description
SWITCH 0060030
Description
SWITCH 0060031
Description
SWITCH 0056209
Description
166
ELECTRIC SWITCHES
Helicopter switch
Description
Description
Description
KEYPAD 8
SWITCH 161646
Description
Push-buttons
FOR CALIPER+ 0062642
Description
SWITCH 0057807
Description
Circuit boards
PUSH-BUTTON, CLOSING
SWITCH 0057808
Description
PUSH-BUTTON, OPENING
Description Description
167
SWITCH 0061966
Description
PUSH-BUTTON, OPENING
Description
SWITCH 0066818
Description
Description
SWITCH 0066217
Description
SWITCH 0058161
Description
MAIN SWITCH
Description
TP2000 0061983
SWITCH 0057363
168
ELECTRIC SWITCHES
Description Description
Description Description
Description Description
Description Description
169
SWITCH 0065547 ROCKER ARM 0060174
Description Description
SWITCH 0065548
Description
Description Description
PUSH-BUTTON 0044130
SWITCH 0060172
Description
SWITCH 0060173
Description
WINDSCREEN WIPER/WASHER,
RETURN <ON>-OFF-<ON>
170
ELECTRIC SWITCHES
Windscreen wiper
PS0748
selector, 4 pcs
BALL HANDLES, HARVESTER
Off-road steering, joystick PS0754
Description No.
Off-road steering,
0070748
Joystick, steering lever, rocker switch
0071483
2 pcs
Windscreen wiper, 1 pc <ON>OFF<ON> 0066217
Keyboard, left, 1 pc 0070051
Differential gear lock,
ON/OFF/ON 0069070
Keyboard, right, 1 pc 0070052 Drive mode, 2 pcs
Description No.
Driving direction, 1 pc ON-OFF-ON 0069079
Joystick, steering lever,
0065543
2 pcs
Potentiometer windscreen
P20458 Windscreen wiper
wiper, interval PS0748
selector, 4 pcs
Potentiometer,
1631740 Off-road steering, joystick PS0754
mini steering wheel
Potentiometer windscreen
Keyboard, right, 1 pc 0070742 P20458
wiper, interval
Thumb switches, left, Potentiometer,
0070745 1631740
1 pc mini steering wheel
171
MARKNADEQUIPMENT
FORESTRY FÖR
QUALITY
SKOGSMASKINS-
UTRUSTNING
ACCESSORIES
PONSSE TILLBEHÖR är kvalitetsprodukter som är särskilt
PONSSE
utformadePARTS ACCESSORIES
för skogsindustrins comprises
tuffa quality tillbehör
krav. Ponsses
products
och reservdelssatser är noggrant utvalda av of
designed specifically for the purposes forestry
Ponsse med
professionals.
tanke Ponsse branded accessories
på skogsmaskinentreprenörernas and assortments
behov. Och allihop
are carefully
uppfyller selected
Ponsses by Ponsse
hårda for the needs
kvalitetskrav. of forest
Utbudet omfattar
machine entrepreneurs. They meet all the
verktyg, reservdelssatser, sågsvärd och kedjor. Ponsse quality
requirements. The selection includes tools, assortments,
saw bars and chains.
Accessories
Miscellaneous............................................................... 174
Sets................................................................................ 174
Welding accessories.......................................................... 174
Miscellaneous............................................................... 175
First aid kit....................................................................... 175
Storage case for manuals................................................... 175
Powder fire extinguisher and accessories.............................. 175
Logger’s tape measure....................................................... 175
Plastic container................................................................ 175
Main current switch wrench................................................ 175
Tyre inflator...................................................................... 176
Compressed air hose for Ponsse forest machines.................. 176
Tool box............................................................................ 176
Equipment box................................................................... 176
Hinges............................................................................. 176
Fuel filling pumps............................................................... 177
Hydraulic oil filling pumps.................................................... 177
Filling hoses...................................................................... 177
Tank caps......................................................................... 177
Oil absorbent paper............................................................ 177
Sight glasses.................................................................... 177
Manual lubrication............................................................. 178
Centralised lubrication........................................................ 178
Spare belts....................................................................... 178
Pressure gauges............................................................... 178
Pressure gauge hoses........................................................ 178
PONSSE special tools................................................... 179
Special tools..................................................................... 179
Have check valve key.......................................................... 180
Engine service tools........................................................... 180
Wire connection tools........................................................ 180
Torque wrenches............................................................... 181
Spanner wrenches, KM...................................................... 181
Spanner wrenches, GU....................................................... 181
Extractors........................................................................ 182
Hydraulic cylinder wrenches................................................ 182
T-Wrenches...................................................................... 182
Hand tools........................................................................ 182
Battery maintenance.......................................................... 183
Repair shop machinery and equipment.................................. 183
Lifting equipment............................................................... 183
General hand tools............................................................. 184
Chain and track tensioners.................................................. 184
Bars and installation rods................................................... 184
Dual, Grapple changing tool................................................. 184
Ladders, working platforms................................................. 185
Trestles............................................................................ 185
Tool sets.......................................................................... 185
173
Miscellaneous
PONSSE Assortments
We have supplied forest machine accessories to our customers for more than 20 years. As a
new feature, our service business now offers PONSSE Assortments that are based on the daily
service needs of forest machine entrepreneurs and meet Ponsse’s quality requirements.
The assortments include a wide selection of high-quality accessories that answer to the present-
day needs. The assortments are assembled in a durable, high-quality set case that is well-suited
for the use of a machine entrepreneur.
SETS SETS
WELDING ACCESSORIES
Description No.
Welding wire,
0071450
OK ARISTOROD 12.50 1.0 mm 18 kg
Welding electrode,
0073580
OK48.00 2,5 mm / 1.7 kg
Welding electrode,
0073581
OK68.82 2,5 mm / 0.6 kg
174
ACCESSORIES
Miscellaneous
No.
P34499
PLASTIC CONTAINER
Description No.
1L 0021719
10 L 0021718
Description No.
Powder fire
0061814
MAIN CURRENT SWITCH WRENCH
extinguisher
Description No.
Fire extinguisher bracket 0058112
Main current switch wrench BOS1342026002
Fire extinguisher fluid 0062268
Main current switch wrench,
0062772
TP2000
175
TYRE INFLATOR EQUIPMENT BOX
Description No. Description No.
Gas Spring
0055191
for Equipment box
HINGES
Description No.
176
ACCESSORIES
Seal 00551011
Description No.
Description No.
FLUTEC 0058493
SIGHT GLASSES
177
SPARE BELTS
Description No.
MANUAL LUBRICATION
0.3 m 0028887
Description No.
0.5 m 0028888
Grease gun, LINCOLN 0028555
0.8 m 0028889
Grease gun hose 0029017
PRESSURE GAUGES
Description No.
CENTRALISED LUBRICATION
0-60 BAR ST010902
Description No.
0-250 BAR ST010903
Filling device, SAFEMATIC 0035460
0-400 BAR ST010904
Filling device, SAFEMATIC NLGI2 0060656
0-600 BAR ST010905
Nipple set +
SM11800064
Crimping tool
Rubber protective cover 0035501
Vaseline EP 00, 18 kg 0033804
Vaseline EP 1, 18 kg 0061307
Vaseline EP 2, 18 kg,
PRESSURE GAUGE HOSES
005678420
Operating temperature -30...+110 °C.
Description No.
178
ACCESSORIES
SPECIAL TOOLS
ELEPHANT
CARIBOU
BUFFALO
GAZELLE
WISENT
BEAVER
COBRA
HN125
HN200
BISON
ERGO
HS16
HS15
HS10
BEAR
H53
H60
H73
C55
FOX
S15
S10
K75
ELK
Description No.
MB
Middle pivot bearing fastening bolt key wrench ST0077 X X X X X
179
HAVE CHECK VALVE KEY WIRE CONNECTION TOOLS
Description No. Description No.
180
ACCESSORIES
Description No.
SPANNER WRENCHES, GU
Description No.
SPANNER WRENCHES, KM
Spanner wrench GU 13 ST0133
Description No.
Spanner wrench GU 15 ST0236
Spanner wrench KM 5,
ST0126
socket 1/2”
Spanner wrench GU 11 short ST0131
Spanner wrench KM 6,
ST0127
socket 1/2”
Spanner wrench KM 7,
ST0128
socket 1/2”
Spanner wrench KM 8,
ST0129
socket 1/2”
Spanner wrench KM 9,
ST0130
socket 3/4”
Spanner wrench KM 10,
ST0134
socket 3/4”
Spanner wrench KM 11,
ST0135
socket 3/4”
181
EXTRACTORS
Description No.
T-WRENCHES
Extractor 1 25–80 mm, bipod ST001401
Description No.
HAND TOOLS
Description No.
182
ACCESSORIES
Description No.
Compressor 2.2 kW
ST0175
with a 20 l tank
Hose reel for compressed air,
ST0176
metal 10 mm/10 m
Transmission oil pump,
ST0304
pneumatic
183
GENERAL HAND TOOLS CHAIN AND TRACK TENSIONERS
Chain tensioner
Multimeter ST0122 ST0294
for Wallingfords chains G202
Chain tensioner
Multimeter 0056878 ST0295
for Wallingfords chains G200
Tyre chain connector
TORX wrench SIZE 40, 1/4” driver ST0235 ST0330
dismounting tool
Bits ratchet set Track tensioner Eco-Track, Eco-Soft,
ST0279
(TORX, hex, 1/4” sockets, ph, pz) Eco-Of, Eco-Max, Eco-Baltic, ST0292
Pro-Track, Combination track
Long hose connector socket wrench 41
ST0308
mm, 3/4” driver
Description No.
184
ACCESSORIES
LADDERS,
TRESTLES
WORKING PLATFORMS
Description No. Description No.
Stepladder, step width 45 cm,
ST018201 Axle trestle SFTAE512 ST0313
height 0.47 cm
Stepladder, step width 45 cm,
ST018202 Axle trestle SFTBE522 ST0314
height 0.70 cm
Stepladder, step width 45 cm,
ST018203 Axle trestle SFTBE523 ST0315
height 0.93 cm
Stepladder, step width 45 cm,
ST018204 Trestle 15 t ST0316
height 1.15 cm
Stepladder, step width 45 cm,
ST018205 Trestle 15 t ST0317
height 1.38 cm
KTA-300 (Protec) folding
ST0191 Trestle 20 t ST0318
installation platform
One-sided industrial steps,
ST030901 Trestle 20 t ST0319
step height 0.78 cm
One-sided industrial steps,
ST030902
step height 1.01 cm
One-sided industrial steps,
ST030903
step height 1.30 cm
One-sided industrial steps,
ST030904
step height 1.56 cm
One-sided industrial steps,
ST030905
step height 2.08 cm
One-sided industrial steps,
ST030906
step height 2.59 cm
Folding work ladder,
ST031001
step height 1.75 cm
Folding work ladder,
ST031002
step height 1.95 cm
Folding work ladder,
ST031003
step height 2.40 cm
Standard folding scaffold, expandable
ST031101
platform 0.75 x 1.8 m
Standard folding scaffold, expandable
ST031102
platform 1.35 x 1.8 m
TOOL SETS
Secure step platform TRT-106 ST018801
Description No.
Secure step platform TRT-108 ST018802
Basic tool set 0076651
Secure step platform TRT-109 ST018803
Expanded tool set
ST0334
for forwarders
Secure step platform TRT-110 ST018804
Expanded tool set
ST0335
for harvesters
Secure step platform TRT-112 ST018805
185
Chemicals
Ponsse paints............................................................ 187
Spray cans....................................................................187
3-Litre containers...........................................................187
1-Litre containers...........................................................187
Paint thinner..................................................................187
Oils.......................................................................... 187
Engine oil operating temperatures............................... 187
Motor oils......................................................................190
Ponsse engine oil 10W-40 PLUS (MB 228.5).....................190
Turbo super 5W-30 (MB 228.5)......................................190
Turbo LXE 10W-30 (MB 228.3).......................................190
Ponsse engine oil 10W-40...............................................190
Turbo LXE 15w-40 (MB 228.3, MB 229.1).......................190
Transmission oil..............................................................190
Hypoidi MP 80W/140 GL-5............................................190
Ponsse gear oil 80W-90 GL-5..........................................190
Ponsse differential oil 80W-90 LS.....................................190
Hypoidi LF 80W-90.........................................................191
ATF-X ...........................................................................191
Viscosity of hydraulic oil............................................. 191
Hydraulic oil...................................................................191
Synhydrauli 15...............................................................191
Ponsse hydraulic oil 32 Super...........................................191
Ponsse hydraulic oil 46 Super...........................................191
Biohydrauli SE 46...........................................................191
Biohydrauli SE 68...........................................................191
Hydrauli 68 super...........................................................191
Adblue fluid for SCR engines.............................................191
Radiator fluids........................................................... 192
Neste Zero HD100 Green...............................................192
Neste 7735 XLC Red.....................................................192
Neste coolant long life M EU Stage IV................................192
Neste 7720 Bio.............................................................192
Vaseline.................................................................... 193
PONSSE Logger’s Grease NLGI 0......................................193
PONSSE Logger’s Grease NLGI 2......................................193
PONSSE Center Grease...................................................193
Lubrication cartridges................................................ 194
PONSSE Logger’s Universal Grease NLGI 2.........................194
PONSSE Logger’s Grease NLGI 0......................................194
PONSSE Logger’s Grease NLGI 2......................................194
PONSSE Logger’s Pro Grease EP 2...................................194
Measuring sensor housing crease.....................................194
NLGI grades of greases used in central
lubrication systems.................................................... 195
Marking paints.......................................................... 195
PONSSE Logger’s Color Red.............................................195
PONSSE Logger’s Color Blue.............................................195
Chain oil................................................................... 196
Ponsse Logger’s Bio Chain Oil...........................................196
Sitko additive..................................................................196
Tapio chain oil................................................................196
Chemicals......................................................................196
186
CHEMICALS
Ponsse paints
Dark grey RAL7021 0035832 Silver grey, Machines with MB engine 0062047
Light grey RAL7005 0035833
Silver grey
0060823
PAINT THINNER
Machines with MB engine
Old grey (aluminium Description No.
446C 0035820
frames) PANTONE
Paint thinner 3 L 0035824
Matt black TM121 0029595
Oils
For all of the oils stated below, the oil change inter-
val for PONSSE forest machines equipped with Mer-
cedes Benz engines is at least 600 hours.
PONSSE °C - 30 - 20 - 10 0 + 10 + 20 + 30 °C
Yellow PANTONE 0067143
1003
187
PERFORMANCE FOR LOGGING SITES
PONSSE Oils available in Europe. The manufacturer reserves the right to make classification and selection changes.
MOTOR OILS TRANSMISSION OIL
The size of the desired vessel is added after the item num- The size of the desired vessel is added after the item num-
ber.For example, the item number is 0074998 when or- ber.For example, the item number is 0074998 when or-
dering PONSSE ENGINE OIL 10W-40 motor oil. By adding dering PONSSE ENGINE OIL 10W-40 motor oil. By adding
the number 20 after the item number (007499820), you the number 20 after the item number (007499820), you
will receive a single 20-litre vessel of that particular motor will receive a single 20-litre vessel of that particular motor
oil.For bulk oil, the item number is left unchanged. oil.For bulk oil, the item number is left unchanged.
PONSSE ENGINE OIL 10W-40 Plus (MB 228.5) HYPOIDI MP 80W/140 GL-5
200 L 20 L 200 L 20 L
No. bulk (* No. bulk
barrel vessel barrel vessel
0074999 x x x 0055312 x x
Neste Turbo Super is a synthetic special oil for high-power Neste Hypoidi MP is a general transmission oil series
diesel engines with extended oil change intervals. with extreme pressure additives. It is manufactured from
solvent-refined paraffin or naphthenic basic oils. The oils
contain efficient antioxidants, antifoaming agents, pressure
TURBO SUPER 5W-30 (MB 228.5) additives, and additional agents that strengthen the
lubrication coating.
200 L 20 L
No. bulk
barrel vessel
PONSSE GEAR OIL 80W-90 GL-5
0071488 x x x
200 L 20 L
No. bulk (*
barrel vessel
PONSSE ENGINE OIL 10W-40 Neste Hypoidi LS 80W-90 is a multigrade gear oil with
extreme pressure additives, containing the additives
bulk (*
200 L 20 L required for the flexible operation of a limited slip
No. barrel vessel differential. The oil is manufactured from solvent-refined
paraffin and contains efficient antioxidants, and additives
00749982 x x x that prevent foaming, wear and corrosion.
Synthetic oil.
(* Note: Separately sold PONSSE oils available in Finland
only.
TURBO LXE 15W-40 (MB 228.3, MB 229.1)
200 L 20 L
No. bulk
barrel vessel
0061074 x x x
190
CHEMICALS
0071159 x x x 0033746 x
Neste Hypoidi LF is a general transmission oil series with Fully synthetic hydraulic oil. In Ponsse forest tractors, the
extreme pressure additives designed for transmissions, oil is mainly used in pneumatic brakes.
gears and hub reductions where the requirement is API GL-
5. Modern EHVI (Extra High Viscosity Index) basic oil has
been used in its manufacture. Neste Hypoidi LF oils contain
PONSSE HYDRAULIC OIL 32 SUPER
efficient antioxidants, antifoaming agents, pressure additives 1000 L 200 L 20 L
and additional agents that strengthen the lubrication coat- No. bulk (* container barrel vessel
ing. Its SAE classification 80W(77W)-90 highlights the su-
periority of Neste Hypoidi LF over SAE 80W-90 oils. Neste 00750022 x x
Hypoidi LF has a first-rate fluidity in temperatures below
zero compared with mineral and partially synthetic oils. Its
sensitive fluidity guarantees an effortless start-up. A Super-class multigrade hydraulic oil for outdoor use.
0039250 x 00750032 x x x x
BIOHYDRAULI SE 46
1000 L 200 L 20 L
No. bulk container barrel vessel
0033711 x
BIOHYDRAULI SE 68
1000 L 200 L 20 L
No. bulk container barrel vessel
0067523
0033828 x x
191
Radiator fluids
0061358 x
006135810 x
0062050 x
192
CHEMICALS
Vaseline
18 KG 0073810 18 KG 0073933
193
Lubrication cartridges PONSSE Logger’s Grease NLGI 2
Volume No.
12 x 420 ml 0073806
18 KG 0073933
194
CHEMICALS
PONSSE forest machines contain an automatic lubrication system which allows the use of stiffer
central lubricants.
Greases are divided into NLGI grades from 000 to 6. The higher the number of the grade,
the stiffer the lubricant.
The effect of temperature changes in choosing the grease for central lubricationsystems:
In extreme winter conditions, NLGI 00 grease can be used.Inwarmconditions, NLGI 00 grease may cause
malfunctions in the system.
When changing the grade of the grease: fully use the old grease, fill the container with new grease, bleed the
pumping unit and make sure that the new grease comes out through the bleeding screw.
See the pumping unit’s bleeding instructions from the separate manual delivered with the machine.
Note: When using Twin Heavy or a later system.
Marking paints
For painting timber in forest work. Red. For painting timber in forest work. Blue.
195
Chain oil
The product is 97% pressed rapeseed/rubseed oil, 2% Galss cleaner spray 0029777
raw rubber/vegetable oil product and 1% of a product
which contains 54–58% of harmless acrylic polymer, and Cleaner spray 0029686
the rest comprises a compound of distillates (crude oil).
Rost-off 0029744
Volume No.
Threadlocker, medium strength 0055256
20 L vessel 0066800
Threadlocker, high strength 0061860
SITKO is an oil additive which is designed for toughening Bearning fit 0062479
mineral-based oils into chain oils. Mixing ratio 4%.
Hydraulic sealant 0055258
SITKO is an oil additive intended for toughening Liquid thread sealant 0056157
clear waste oils into chain oils.
Sitko provides oil with adherence, also ensuring Surface sealant, orange 0062639
a good lubrication for the flange and the top
wheel at a high chain speed. Super RTV-silicone 0062476
SITKO easily mixes with oil at a normal repair
shop temperature, and Silicone stick 0056146
the mixing can be carried out either mechanically
or by means of pressurised air. Lock oil 0062478
20 litres of Sitko is good for 500 litres of high- Hand cleaner 1 L 0062480
quality chain oil.
Pineline power wash 10 L 0062020
196
STICKERS
Stickers
Sticker set for vehicles......................................................198
Crane stickers..................................................................198
Loader stickers................................................................198
Base machine frame stickers.............................................198
Harvester head................................................................201
Harvester head warning sticker..........................................201
197
No. Description
STICKER SET FOR VEHICLES
P13020
Description No.
CRANE STICKERS
Description No.
Description No.
P12990
No. Description
P12936 RISK OF GETTING CRUSHED
when tilting machine cabin.
P15276 P12967
WARNING Hydraulical-
ly operated steps. Dan-
ger of slipping or getting
WARNING The air conditioner and its
crushed. Take care when
hoses contain pressurised corrosive
entering or exiting the
fluid. The air conditioner may be ser-
cabin. When stopping the
viced by authorised and trained person-
machine, make sure that
nel only.
there are no obstacles /
people under the auto-
matic steps.
198
STICKERS
P12939 P29202
199
No. Description No. Description
P40018 Minijoystick control handle functions 1220167 Control handle functions for forward-
for a sliding boom crane. The sticker ers with ICL control handles. The sticker
shows which crane and harvester head shows which loader and grapple move-
movements will occur when using the ments will occur when using the control
control handles. handles.
P40015 Minijoystick control handle functions P20162 Control handle functions for Duals with
for a parallel crane. The sticker shows ICL control handles. The sticker shows
which crane and harvester head move- which crane and harvester head/grap-
ments will occur when using the cont- ple movements will occur when using the
rol handles. control handles.
P13269
P15582
1281420 Control handle functions for harvest- P29185 First aid kit location and emergency exit.
ers with ICL control handles. The sticker
shows which crane and harvester head
movements will occur when using the
control handles.
200
STICKERS
No. Description
HARVESTER HEAD
P12927 Instruction sticker for the extinguishing
system. No. Description
No.
P24460
201
NYTT
NEW LIFE
LIV FOR
NYTT
USED
LIV
SPARE
FÖR PARTS
BEGAGNADE
FÖR BEGAGN
RESERVDELAR
RESERVDELAR
PONSSE REMANUFACTURED PARTS ois a service
PONSSE
developed FABRIKSRENOVERADE
by Ponsse, basedPONSSE DELAR
FABRIKSRENOVERADE
on recycling andärreconditioning
en tjänst från DELAR är
Ponsse som grundar sig påPonsse
återvinning
som grundar
och
used spare parts; return the damaged part to us and renovering
sig på återvinning
av och
reservdelar;
replace it by återlämna den reservdelar;
skadade delen
buying a remanufactured återlämna
part till oss och
which den
ersätt
Ponsseskadade delen till o
den
has carefully reconditioned. In addition to the spare part har
genom att köpa en fabriksrenoverad
den genom attreservdel
köpa en som
fabriksrenoverad rese
genomgått Ponsses
that is as good as new,noggranna
genomgått
you will reparationsprocess.
also Ponsses
receive noggranna
Du får reparationspr
a considerable
en reservdel
refund for thesom är som
returned ny
en och
part. reservdel
dessutomsom en är betydande
som ny och dessutom
ersättning för den återlämnade ersättning
delen. för den återlämnade delen.
Remanufactured parts have the same quality and warranty
Vi
as lovar att våra
new parts, Fabriksrenoverade
guaranteed byViPonsse.
lovar delar
attThe
våra
har Fabriksrenoverade
samma
price, kvalitet
however, is delar har s
och garanti
reduced. You som nya both
will save delar.money
ochDäremot
garanti
and theär
sompriset
nya lägre.
delar. Du
environment. Däremot är pri
sparar både pengar och miljö. sparar både pengar och miljö.
Reman parts
Reman parts............................................................... 204
Engine............................................................................. 204
Transmission................................................................... 205
Cabin.............................................................................. 206
Hydraulics....................................................................... 206
Crane products................................................................ 207
Harvester head................................................................ 207
Middle pivot..................................................................... 207
Other items..................................................................... 207
203
REMAN PARTS
REMAN (Remanufactured) parts is a service developed by Ponsse. It is based on recycling and
reconditioning used service parts, and you can use it to ensure uninterrupted use of your for-
est machines, flexibly and affordably. You can return a damaged part to Ponsse and replace it by
buying a REMAN part which Ponsse has carefully reconditioned. We will compensate you for the
returned part when you purchase a REMAN part. You will quickly obtain a new part, and will also
save money and the environment. Quality and service flexibility are ensured by Ponsse’s own re-
conditioning and assembly centre.
Ponsse (IIS)
VR+R:
R: Core return
Sales order
R: Core return
Customer Subsidiary or dealer
VR+R: Sales order
Ponsse is constantly expanding its selection for remanufactured parts, so consult your
nearest Ponsse service point if you cannot find the part you are looking for from the list.
ENGINE
0063166V ENGINE
0063665VR ENGINE
204
REMAN PARTS
TRANSMISSION
205
CABIN
HYDRAULICS
206
REMAN PARTS
CRANE PRODUCTS
HARVESTER HEAD
MIDDLE PIVOT
OTHER ITEMS
207
PONSSE
Performance packages
OPTI6-Reman installation package for TP2004 harvesters......................... 210
PONSSE OPTI7 upgrade package for TP2000 harvesters.......................... 210
PONSSE OPTI7 upgrade package
for OPTINET/SILVEROPTI & 1000 machines............................................ 211
PONSSE OPTI7 Upgrade Package for TP2004 harvesters.......................... 211
Caliper3 calipers ................................................................................ 212
Updating the IPS/PVC Knutsson crane control system.............................. 212
HS10 Drive transmission control modernisation....................................... 213
PONSSE Comfort Control Handle update ................................................ 214
Control handle update for harvesters equipped with MB-engine................... 215
Slagkraft brush cutter installation package for Ergo harvesters................... 215
Pump upgrade packages....................................................................... 216
Upgraded driving hydraulics .................................................................. 217
PONSSE Performance Packages – harvesters, duals and forwarders.....218
Tyre pressure guard............................................................................. 218
Oil drain hoses.................................................................................... 218
PONSSE Performance Packages – duals and forwarders....................219
PONSSE 10W..................................................................................... 219
PONSSE Facelift Packages.................................................................... 219
OPTI6-Reman installation package for TP2004 forwarders......................... 220
Opti7 PC system for forwarders ........................................................... 220
Burger 1.6 and 2.0 clam bunk package for PONSSE machines................... 221
Bulldozer blade kits for forwarders......................................................... 222
Pump upgrade packages....................................................................... 223
Axle and peg bearing sets for bogie housings........................................... 224
Ponsse branded Sorter Bunks............................................................... 224
PONSSE Performance Packages – cranes and loaders........................226
Spare part lifting boom C22+ and C44................................................... 226
C2/C4 spare part boom package.......................................................... 226
Sliding boom roller packages................................................................. 227
PONSSE Performance Packages – harvester heads............................228
Measurement wheel package................................................................ 228
Hose package for H6/H7/H8 harvester head feed motors....................... 230
SKF chain lubrication system................................................................. 231
H60/H60e feed roller packages............................................................ 231
New CT+ chain tensioner...................................................................... 232
Harvester head sleeve and reinforcement sets......................................... 233
Harvester head bushing sets................................................................. 233
Saw box light sets................................................................................ 234
Retrofit colour marking equipment.......................................................... 234
Colour marking packages...................................................................... 235
LoadOptimizer PC scale........................................................................ 235
StandAlone LoadOptimizer packages.................................................236
PONSSE Performance Packages – for other manufacturers’ machines....238
OPTI7 basic package for all base machines.............................................. 238
208
FÄRDIGTREADY
UPDATE FÄRDIGT
PACKAGE
UPPDATERINGSPAKET
UPPDATERINGS
PONSSE UPPDATERINGSPAKET
det behövs mer omfattande underhåll
PONSSE
det behövs
eller då
UPPDATERINGSPAKET
är avsedda
mer
för tillfällen då
skogsmaskinerna
är avsed
omfattande underhåll eller då s
PONSSE PERFORMANCE
behöver uppdateras. PACKAGES
Med prestandapaketen
behöver uppdateras. är detMed
are designed möjligt
for prestandapakete
att öka
more produktiviteten,
extensive effektiviteten
basic maintenance att and
öka updates
produktiviteten,
och of livslängden.
forest effektiviteten o
Paketen utgöras
machines. av specialutformad
With Performance Paketen utrustning,
Packages utgöras avsom
it is possible specialutformad
gör utrus
attincrease
to du kan uppdatera skogsmaskinen
productivity, att du
efficiency andkan
lätt uppdatera
och behändigt
service life. Theskogsmaskinen
och lätt oc
därmed spara
packages tid och pengar.
are designed entities,därmed
Efter
which uppdateringarna
spara it
makes tidpossible
och pengar.
hartodu Efter uppdat
en maskin
update med bättre
a machine produktivitet
effortlessly en maskin
and tooch
saveekonomi
med
timebättre
samt
and produktivitet
längre
money. och ekon
livslängd.
As a result of updates, you will livslängd.
have a more productive and
economical machine and extend its service life.
With the PONSSE Opti6 Upgrade Package, With the PONSSE Opti7 Upgrade Package, the
the machine’s measuring device system can be machine’s measuring device system can be updated
upgraded to match modern requirements. to match modern technology.
After the installation, it is possible to use the After the installation, it is possible to use the latest
latest harvester and forest company software. harvester and forest company software.
An affordable solution thanks to the Get the latest advanced technology for forest
remanufactured PC! machines.
PONSSE harvesters made in 2004 or later can be updated with PONSSE harvesters made in 2000–2003 which use the Opti2000
the PONSSE Opti6 Upgrade Package. After the upgrade, you measuring device can be updated with the latest PONSSE Opti7
get the most advanced measuring device technology, and can Upgrade Package. After the upgrade, you get the most advanced
use the latest harvester and forest company software. With the measuring device technology in forest machines, and can use the
Upgrade Package, the PONSSE forest machine’s Opti+, Opti5 latest harvester and forest company software.
and Opti5+ PC can be updated to the latest version.
The Opti6 PC includes a touchscreen, and the PC is integrated In addition, optional equipment for the Upgrade Package includes
inside the display unit as a compact package, as in the Opti7 PC. the PONSSE Comfort control handle and Caliper3 updates.
The Opti6 PC also provides you with the latest PONSSE Opti4G
program version. Opti6 is also able to use all of the latest
support software, such as PONSSE Manager and EcoDrive. AC network installation:
DC nodes are replaced by AC modules. The Arcnet network is up-
dated to work with the Opti7-PC. In addition, you get the latest
PONSSE Opti4G software version.
0077289 OPTI6 Reman installation PONSSE OPTI7 upgrade package for TP2000
for TP2004 harvesters harvesters
210
PERFORMANCE PACKAGES – HARVESTERS
PONSSE OPTI7
PONSSE OPTI7
upgrade package for
Upgrade Package
OPTINET/SILVEROPTI
for TP2004 harvesters
& 1000 machines
211
Updating the IPS/PVC Knutsson crane control system
Harvesters
Caliper3 calipers
The packages are suitable for installation directly with the new
OPTI7 measuring device or in place of Caliper+.
The packages include calipers, cables for both installation options
and fasteners.
Strong structure with a magnetic measuring principle Caliper3 performance package with
0070529
65 cm calipers
Light and balanced
Caliper3 performance package with
A user-friendly and easy-to-learn user interface 0070511
50 cm calipers
Installation
Secure the measurement accuracy of your machine with the latest
Caliper3. The structure of Caliper3 is renowned for its durability, The estimated installation time is 1 hour.
accuracy and maintenance-free measuring principle.
The installation is performed by a Ponsse-authorised
service shop.
212
PERFORMANCE PACKAGES – HARVESTERS
0068109
HS10 Drive transmission control modernisation
Main Components
Main Components
213
PONSSE Comfort Control Handle update
Installation
214
PERFORMANCE PACKAGES – HARVESTERS
215
Pump upgrade packages
Main Components
Hose assembly 1 pcs L1156 The pump upgrade packages are available for machines with
the following serial numbers: 040001–040087
Seals and o-rings
216
PERFORMANCE PACKAGES – HARVESTERS
Performance packages
Buffalo 8W 030285-030902
Buffalo 8W 0320001-0320616
Wisent 8W 080183-080532
Wisent 6W 090035-090090
Gazelle 0110001-0110180
0069677
Elk 6W 0130001-0130093
Driving efficiency as in new machines
Elk 8W 0140001-0140384
Improved driving comfort and control
Wisent Dual 0100021- 0100047
Savings in fuel consumption
With these packages, the driving hydraulics of your machine will Wisent 8W 0530001-0530131
be as in new machines. Preventive maintenance in good time
prevents downtime caused by worn components. Wisent 6W 0520001-0520005
Beaver 040550-040768
Main components 0069679
Beaver 0450001
Pump of the driving transmission
Hydraulic filters
Ergo 6W 051137-051546 0077112
Installation
Ergo 6W 0390001-0390120 0077113
Installation takes about eight hours.
217
PONSSE Performance Packages – harvesters, duals and forwarders
Minimised tyre wear and fuel consumption A quick solution for changing the engine oil
No punctures Cleaner and safer oil drainage
The real-time tyre pressure monitoring system is available for PONSSE oil drain hoses are installed in place of the regular engine
PONSSE and other forest machines. The tyre pressure monitoring oil draining plug.
system consists of a display unit, external antenna and sensors/ Thanks to its leak-proof globe valve, the drain hose can be left in
transmitters attached to tyres. place once the oil has been changed and suspended behind the
The sensors are attached to tyre valves, from where they send underbody protection plate.
pressure and temperature data wirelessly to the display unit as As a result, the hose is ready for the next oil change.
an RF signal. The display unit receives and processes the incom-
ing data and displays it on the screen. The display unit presents
alarms if the tyre pressure level is incorrect so that the driver can
take immediate action.
With the system, the driver can maintain the correct tyre pres-
sure in order to minimise fuel consumption and tyre wear, and to EU STAGE IIIA engines 0071480
avoid punctures.
218
PERFORMANCE PACKAGES – HARVESTERS
The installation is performed by a Ponsse-authorized * Not applicable for N-series machines with the 3B engine layout
service shop.
219
OPTI6-Reman installation package
Opti7 PC system for forwarders
for TP2004 forwarders
Easier time and efficiency tracking Easier time and efficiency tracking
Enables reporting on the quantity of locally Enables the reporting of short-distance transported
transferred timber timber volumes
Connection of GPS positioning and map programs Enables adding GPS positioning and map software
possible
A low price thanks to the remanufactured PC! PONSSE forwarders can be seamlessly integrated into the wood
procurement management system by equipping them with a high-
performance Opti7 PC and Opti4G forwarder software. This ena-
PONSSE forwarders can be seamlessly connected to the wood bles nearby transport to be planned and implemented and road-
procurement management system by equipping them with the side storages monitored almost in real-time.
Opti6 PC and the Opti4G forwarder software. This enables
The software includes the OptiControl machine control system
nearby transport to be planned and implemented and roadside
with operator profiles and data transfer and reporting software.
storages monitored almost in real-time. The software includes
Furthermore,a forest-company specific map, data transfer applica-
the OptiControl machine control system with operator profiles
tion or GPS positioning can be connected to the system.
and data transfer and reporting programs. In addition, a forest
company-specific map or data transfer application or GPS
positioning can be connected to the system. Time and efficiency tracking
Time and efficiency tracking is a standard feature in PONSSE for-
Time and efficiency tracking warders equipped with an Opti7 PC.
Time and efficiency tracking is a standard feature in PONSSE The system collects information on time distribution, production,
forwarders equipped with the Opti6 PC. The system collects machine operation and fuel consumption.
information on time distribution, production, machine operation
The operator logs onto the system at the beginning of the work
and fuel consumption. The operator logs onto the system at
shift. As the work progresses, the software automatically collects
the beginning of the work shift. During work, the program
information, asking the reasons for breaks separately, where de-
automatically collects information. The operator can read
sired. The operator can read all of the reports on the display.
all of the reports on the display. The program produces DRF
report files which are read using the OptiReport program in the The software produces DRF report files that can be read using the
forwarder or at the office. OptiReport software in the forwarder and the office.
For TP2004 model series machines Starting TP2004 model series.
220
PERFORMANCE PACKAGES – HARVESTERS
Burger 1.6 and 2.0 clam bunk package for PONSSE machines
Components
Clam bunk
Machine can be used in tree length and cut-to-length
method. Baseplate
A functional package when combined with a Ponsse Cable series
crane.
Hoses
Easy handling of whole trees.
Fitting supplies
Reliable German design.
Hydraulic fittings
Extra consoles
Burger 1.6 m2 package 0068080 (Elk & Buffalo)
Installation
Burger 1.6m package 0077173
2
221
Bulldozer blade kits
for forwarders
PONSSE Buffalo
Buffalo 8w 030141–030902,
Buffalo 6w 0150001–0150039
Buffalo Dual 070036–070155 0069776
Buffalo King 8w 0120001–0120152
Buffalo King 6w 0190001–0190040
PONSSE Buffalo
Buffalo 0320001➠
Buffalo 6W 0310001➠
Buffalo Dual 0340001➠ 0077359
Buffalo King 8W 0360001➠
Sturdy bulldozer blade for moving soil, snow, etc. Buffalo King 6W 0350001➠
Excellent for clearing storage sites, for example
Can also be used as an aid when working on a slope PONSSE Elephant/ElephantKing
to stop the machine from sliding
0420001➠, 0440001➠, 0440001➠ 0069777
Equipped with a floating function: the ground will
not be disturbed when removing snow, etc. Elephant
The bulldozer blade can be used to move soil, snow or other ma- Elephant 0160001➠, 0170001➠ 0077263
terials. The hydraulically-operated bulldozer blade is mounted on
the machine front frame, and it is controlled with the loader con- Model series 2015 forwarders
trol handle.
The blade also includes a floating function that prevents the soil Buffalo 6W A150002➠,
from being damaged during snow ploughing and other similar ac- Buffalo 8W A080034➠,
tivities. Buffalo Dual A140003➠,
The package includes everything you need for installation: the bull- Buffalo King A120015➠,
dozer blade, cylinders, hoses, a bulldozer blade valve and the com- Elephant A180001➠,
ponents for the K170LS directional valve. 0077181
Elephant King A130002➠,
Elk 6W A170001➠,
Elk 8W A070002➠,
Wisent 8W A030003➠,
Gazelle A160001➠
Main Components
Bulldozer blade
Cylinder
Installation
222
PERFORMANCE PACKAGES – HARVESTERS
For service parts, pump upgrade packages are now available for
PONSSE harvesters for upgrading the crane pump from Parker P2
to Rexroth.
With the pump upgrade, the pump’s displacement increases from
145 cm3 to 190 cm3 in Buffalo, this improving the machine’s per-
formance. Even when the loader is used simultaneously with many
other movements, its movement speed will not slow down, as it did
when using the previous 145 cm3 pump. Where as the flow rate of
the smaller pump has been sufficient for using the loader, the larger
pump enables using lower working revolutions for achieving the same
flow rate.
Other models pump’s displacements are still same than before
145 cm3. Rexroth 145 cm3 pump is durable and safety solution
replacing old and worn Parker P2 hydraulic pump.
Loader pump
Parker 145 cm3 ➠ Rexroth190 cm3
Main Components
Attachment parts
0067731 Buffalo loader pump 0067782 Elk & WisentDual loader pump
130/145 ➠ 190 cm³ Parker 145 cm3 ➠ Rexroth 145 cm3
Available for machines with the following serial numbers: Hose assembly 1 pcs L0166
Buffalo 030001–030140
Fuel tank, 1 pcs P21632
Installation
223
Axle and peg bearing sets
Ponsse branded Sorter Bunks
for bogie housings
Prevent idle down time caused by gear damage
Prevent gear damage
Axle and peg bearing sets for bogie housings include gaskets,
axles and bearings for bogie housings. For the hub, the packages
include needle bearings for the hub’s planetary gear and the seal
between the planetary gear and flange.
These performance packages have been designed for prevent
down time caused by gear damages. Wearing parts should be
replaced at regular intervals.
The packages include parts for bogie housings and hubs on both
sides.
Main Components
PO71 0075974 Using the sorters the machine operator can create separate spaces
for different timber types in load space. This makes unloading much
PO74 0075975 faster and easier as timber types are already separated, allowing
more efficient forwarder operating.
PO83 & PO84 0075976
Sorter bunks are very quick and easy to install, takes only about 15
PO40 0075999 minutes. After the sorters have been installed, they can be turned
to up- or down-position with machine grapple, so the operator
PO75 0075998 doesn’t have to exit cabin.
Installation
0068803
Installation
224
PERFORMANCE PACKAGES – HARVESTERS
225
PONSSE Performance Packages – cranes and loaders
Spare part lifting boom C22+ and C44 C2/C4 spare part boom package
Main Components
Main Components
C2/C4 310001–310626,
C22+/C44 110, C44 85 0073856 0072752
320001–320089
226
PERFORMANCE PACKAGES – HARVESTERS
C44+, C50
Main Components
Main Components
Main Components
C6 HI
Main Components
227
PONSSE Performance Packages – harvester heads
Main Components
Main Components
228
PERFORMANCE PACKAGES – HARVESTERS
Main Components
Length measuring device frame, 1 pcs P10073 Pulse sensor, 1 pcs 0066157
Main Components
Installation
229
Hose package for H6/H7/H8 harvester head feed motors
H6 0071209
Main Components
Available for harvester heads with the following serial
numbers: 670001-670327
Hose assembly
H7 0068739
Main Components
Available for harvester heads with the following serial
numbers: H7 770001-770237
Hose assembly
H8 0070097
230
PERFORMANCE PACKAGES – HARVESTERS
231
New CT+ chain tensioner
PONSSE CT+
0071092
Saw unit package
232
PERFORMANCE PACKAGES – HARVESTERS
For Ponsse service parts, bushing packages are now available for
all Ponsse harvester heads to help to update old and worn bush-
ings with new ones. As a result, clearances in the harvester head
can be removed and the reliability of operations improved.
Improved reliability of operation and accuracy
The packages include all bushings for a harvester head. Delimbing
knives, feed roller frame, length measuring device frame, bush-
ings for cradle and reaction bar, in which case this part of the har-
A sleeve and reinforcement set has been designed for PONSSE vester head can be renewed to be as good as new.
harvester heads. The aim of the set is to make the frame of a
worn harvester head as good as new. The WB series bushings used in Ponsse’s bushing packages en-
dure heavy loads and impact load, and have good lubrication char-
The repair kits are divided into two parts: lug sheets and sleeves acteristics due to lubricant holes.
which are recommended to be changed at intervals 15,000
hours, and a set containing a front delimbing knife and bottom iron
plate for H60 harvester heads, and a bottom iron plate for H73
harvester heads, which is recommended to be changed at inter-
vals of 5,000 hours.
Bushing sets
H53/ H53e
H53 0063231
15000h Set H53, 53315 ➠
0068840 H60 0063230
15000h Set H53e, 54001 ➠
H60 H73 0063232
Installation
233
Saw box light sets
Main Components
760122➠, 840044➠
H7/ H8 0074837
90 cm saw box
760122➠, 810001➠
H7/ H7Euca 0074836
75 cm saw
H6 670551➠ 0074835
H60
H7
60986-601055 0068710
770001 ➠ 0068462
601056-601086 0068709
BSP 760001 ➠ 0077236
H53
ORFS 760001 ➠ 0077249
53114 ➠ 53487 0068722
H8
53488 ➠ 0068723
830001 ➠ 0068462
H53e
BSP 840001➠ 0077236
54001 ➠ 0068729
ORFS 840001➠ 0077249
H73e
740001 ➠ 740548 0068798 + Colour marking block for all harvester heads
234
PERFORMANCE PACKAGES – HARVESTERS
Colour marking
LoadOptimizer PC scale
packages
A complete replacement part – minimises idle time. Assortment buttons in PONSSE Comfort handles
Easy-to-use and informative user interface
Ready-assembled hydraulic colour marking packages are now avail- Exhaustive Comprehensive reports on production
able for Ponsse harvester heads. The purpose of the packages is and the device’s measuring accuracy
to operate colour marking in harvester heads as quickly as possi-
ble. Old and fixed blocks dry up easily when unused, in which case
the installation of a new block is a good and reliable solution. The new LoadOptimizer PC scale can now be ordered from after-
sales marketing. The installation of the PC scale always requires
The diameter of the colour pistons is wider than that of Ponsse’s
two installation packages: the base machine package and the crane
competitors, so bleeding is easy, and wood can be marked quickly
package. As the PC scale is integrated in the forwarder’s OptiFor-
and accurately.
warder information system, no separate scale display will no longer
The non-returning valves in the nozzles stop the colour from leaking be needed.
from the colour hoses, resulting in 100% marking reliability first
thing in the morning, starting from the very first log.
PC scale requirements
NOTE: To be ordered separately with the complete package.
• Opti 4G 4.725 software (at least Opti5+ PC)
• PONSSE Comfort controls (optional keyboards assortment
buttons are delivered with the scale package)
Colour marking package, BSP 0067785 • Arcnet driver version 3.2
235
StandAlone LoadOptimizer packages
Main Components
Main Components
The PONSSE LoadOptimizer system weighs, sorts, Weight sensor, 1 pcs 1631733
saves and manages load data at all working stages.
Pivot frame pin, 1 pcs P25265
LoadOptimizer packages are designed to endure
extreme conditions and heavy use.
LoadOptimizer offers a whole new view on loading:
weight has value. 00676381 LoadOptimizer package
for old PONSSE models
Main Components
The new PONSSE LoadOptimizer is accurate, durable and easy
to use in precise weighing when loading and unloading wood, Hub module, 1 pcs 1631691
fuel wood and other materials. LoadOptimizer packages are now
available for new and used Ponsse machines, as well as other Display, 1 pcs 1631732
forest machines.
Fully automatic weighing during loading and unloading, and load Weight sensor, 1 pcs 1631733
detail registration fulfill the measurement demands for fuel wood,
for example. Load data is always up to date. The clear graphic Slewing sensor kit, 1 pcs 0066316
display, help texts and auditory signals instruct the user during
loading. Tree species selection keyboard, 1 pcs PS0453
If the PONSSE LoadOptimizer installation packages are installed
in forwarders of a make other than Ponsse, two packages will be
required (base machine package and loader package).These two
0067722 LoadOptimizer package
packages will be needed also for PONSSE machines with K90-
for other manufacturers’ machines
and K100 series cranes/loaders.
PONSSE machines with K70+ loader will need only one package. Two packages needed. Base machine package and crane
It includes base machines and loader parts for LoadOptimizer in- package + additional equipments.
stallation.
Weighing scale (P30769) is available as additional equipment for Crane package (slewing sensors)
all LoadOptimizer pakcages.
Kesla/Cranab 0067718
Contact your nearest Ponsse service center for price and
availability. Loglift 0067719
Ponsse 0066316
00672531 LoadOptimizer package K70+ S
(Wisent, Elk, Gazelle) Additional equipments
Hub module, 1 pcs 1631691 Connector box (Loglift) timber trucks only 0067721
236
PERFORMANCE PACKAGES – HARVESTERS
Main Components
Weight sensor, 1 pcs 1631733 Installation
Pivot frame pin, 1 pcs P12631 Installation takes about 16-24 hours.
Main Components
Weight sensor, 1 pcs 1631733
Pivot frame pin, 1 pcs P12631 P32893
Main Components
Weight sensor, 1 pcs 1631733
Pivot frame pin, 1 pcs P32893
237
PONSSE Performance Packages – for other manufacturers’ machines
PS0382 PS0493
Installation examples
Installation
Ponsse has designed the Opti7 basic package for all types of base
machines. The package consists of a display and seat module as well
as an Opti7 measuring device. Opti7 is a simple and versatile meas-
uring and control system for PONSSE harvester head retrofits.
Opti7 includes all of the features required for effective, productive
harvesting when automatic marking for bucking, wireless data trans-
fer or map systems are required. Opti7 meets all the modern har-
vesting requirements of forest companies. Harvester head sensor
actuators are connected to the harvester head module. The module
controls the harvester head and reads harvester head inputs. The
module, sensors and actuators are delivered in a package delivered
with the harvester head.
238
OPERATIONS
MANAGEMENT SYSTEM
FOR FOREST MACHINE
ENTREPENEURS
PONSSE Manager allows you to easily monitor and control your company’s daily operations. The
comprehensive and user-friendly tool helps in maintaining your machine fleet and increases the efficiency
of work planning and reporting. PONSSE Manager provides you with real-time, comprehensive data on
your fleet – both performance and sites. Manager can be used conveniently on a smartphone, tablet or
PC.
240
Dimex is a Finnish family business that has
manufactured workwear for tough and varying
Finnish conditions for over 30 years. That’s why we
know how to make strong and functional workwear.
We deliver approximately 300,000 garments
annually. They are used on all kinds of worksites from
construction to clearing and transportation, from
industrial halls to forests and harbours.
Dimex makes workwear for those who work tough.
Dimex mainos?
WWW.DIMEX.FI/EN
241
PONSSE Collection
For Ponsse Collection products, we believe customers appreciate quality and services.
The clothes can be selected and purchased at Ponsse outlets.
Clothing
Ponsse Collection offers high-quality clothing
designed for work and leisure-time. We have
received positive feedback on our products
and expanded the collection according to our
customers’ needs.
Summer
JACKET
866
Plenty of pockets. Hand-, mobile-, carpetknife- and marker-
pocket and a inside breast pocket. Reflectors at back and
in the front. Ponsse print on the chest and on the back of Black sleeveless overall with two cargo pockets, front pock-
the neck. ID pocket can be taken out of the chest pocket. ets, pen pocket, mobile pocket and back pocket. Knee pad
pockets inside. Horizontal/vertical pull-out ID-card pocket in
cargo pocket. Rises high at the back, rib-knit at the back.
Reflectors and adjustable straps. Adjustable hem 4 cm.
Size: S–XXXL Colour: black/grey Ponsse print on cargo pocket.
242
PONSSE COLLECTION – FOR WORK
No. No.
140 867
Functional work trousers. Thigh-, mobile-, carpetfnife- and Front pockets, patch pocket, leg pocket. Tape measure
markerpocket. Normal waist. Ponsse print. Comfortable and pen pockets, large back pockets. Knife button and
fabric. loop. Belt loops. 3/4 length. Print on leg pocket.
Material: 70% polyester, 30% cotton twill Material: 65% polyester, 35% cotton
TROUSERS
JACKET, HIGH-VISIBILITY COLOUR
WITH KNEEPADPOCKETS
No. No.
905 907
Material: 46% co, 38% eme (t400 fiber), 16% pes Material: 70% polyester, 30% cotton
243
TROUSERS,
HIGH-VISIBILITY COLOUR
No.
908
OVERALL, NYLON
No.
Black and hi-vis yellow trousers. Visibility class 1.
Two thigh pockets, a pen pocket and a mobile pocket. 981
One Ponsse print.
SAFETY VEST
COTTON OVERAL, COTTON
No. Size
No.
0072806 XS
977
0061256 M
244
PONSSE COLLECTION – FOR WORK
Winter
No.
No. No.
9711 972
Material: 70% polyester, 30% cotton Material: 70% polyester, 30% cotton
245
Size chart
MEN
Sizes 44 46 48 50 52 54 56 58
A. Chest measurement 88 92 96 100 104 108 112 116
B. Waist measurement 73 78 83 88 93 98 103 108
C. Hip measurement 92 96 100 104 108 112 116 120
D. Crotch measurement 80 81 82 83 84 85 86 87
Sizes 60 62 64 66 68 70 72 74
A. Chest measurement 120 124 128 132 136 140 144 148
B. Waist measurement 113 118 123 128 133 138 143 148
C. Hip measurement 124 128 132 136 140 144 148 152
D. Crotch measurement 88 88 88 88 88 88 88 88
MEN
Sizes XS S M L XL 2XL 3XL 4XL
A. Chest measurement 82 90 98 104 110 118 126 134
WINTER JACKET, HIGH-VISIBILITY COLOUR B. Waist measurement 65 75 85 93 100 110 120 130
C. Hip measurement 86 94 102 108 114 122 130 138
No. D. Crotch measurement 79 81 83 84 86 87 87 87
Sizes 5XL 6XL MEN
949
A. Chest measurement 142 150 XS 40 – 42
B. Waist measurement 140 150 S 44 – 46
C. Hip measurement 146 154 M 48 – 50
A black and hi-vis yellow jacket. Visibility class 2. Ponsse
prints on the chest and on the back of the neck. Warm D. Crotch measurement 87 87 L 52
Thinsulate insulation. Plenty of pockets: chest pockets, double XL 54 – 56
hand pockets, two inside breast pockets and a mobile pocket. 2XL 58 – 60
Reflectors at the back and in the front. ID pocket can be tak- BODY MEASUREMENT QUIDELINES
3XL 62 – 64
en out of the chest pocket. 4XL 66 – 68
A Chest
Circumference of the chest
highest place.
Size: S–XXXXL Colour: yellow B Waist
Circumference of the waist.
Material: 70% polyester, 30% cotton C Hip
Circumference of the hip
widest place.
D Crotch measurement
Leg length from the crotch
to the floor.
WOMEN
XS 32
WOMEN S 34 – 36
Sizes 34 36 M 38 – 40
A. Chest measurement 80 84 L 42
B. Waist measurement 60 64 XL 44 – 46
C. Hip measurement 88 92 2XL 48 – 50
3XL 52 – 54
D. Crotch measurement 80 81
Sizes 38 40 42 44 46 48 50 52
A. Chest measurement 88 92 96 100 104 110 116 122
B. Waist measurement 68 72 76 80 84 88 96 100
C. Hip measurement 96 100 104 108 112 118 124 130
D. Crotch measurement 82 83 84 85 86 87 88 88
WOMEN
WINTER TROUSERS,
Sizes XS S M L XL 2XL 3XL
HIGH-VISIBILITY COLOUR
A. Chest measurement 78 82 90 96 102 113 125
No. B. Waist measurement 58 62 70 76 82 92 103
C. Hip measurement 84 90 98 104 110 121 133
904
D. Crotch measurement 78 80 82 84 85 87 88
CHILDREN
Black and hi-vis yellow overalls. Visibility class 1. Normal Sizes 90 100 110 120 130 140 150 160 170
waist from the front and rises higher from the back. Two A. Chest measurement 54 56 60 64 68 72 78 83 87
thigh pockets, a pen pocket and a mobile pocket. Warm
Thinsulate insulation. Adjustable straps. One Ponsse print. B. Waist measurement 53 54 56 58 61 64 68 71 74
C. Hip measurement 58 60 64 68 71 75 81 86 90
D. Crotch measurement 37 44 47,5 54,5 60 65 71,5 76 80,5
Size: C46–C68 Colour: black/yellow
Sizes in the table are in centimeters.
Measurements are body measurements. Clothes moving looseness
Material: 70% polyester, 30% cotton has been taken into account in pattern making. Looseness in
products vary from model to model.
246
PONSSE
COLLECTION
Products for work and free time for the whole family!
247
248
NOTES
249
PONSSE PLC
PONSSE SUBSIDIARY
PONSSE DEALER
250
PONSSE GLOBAL SERVICE
251
Ponsse Plc Ponsse North America, Inc. Ponsse UK Ltd.
Ponssentie 22 4400 International Lane Unit 3, Broomhouses 1
FI-74200 Vieremä Rhinelander, WI 54501 Industrial Estate
FINLAND USA Lockerbie,
Tel. +358 20 768 800 Tel. +1 715 369 4833 Dumfriesshire DG11 2RZ
Fax +358 20 768 8690 Fax +1 715 369 4838 UNITED KINGDOM
Tel. +44 1576 203 000
Fax +44 1576 202 202