Documente Academic
Documente Profesional
Documente Cultură
_____
TECHNICAL SUBMITTAL
For
CHILLED WATER PUMPS
Manufacturer
PATTERSON PUMP COMPANY,
9201 AYERSEVILLE ROAD, TOCCOA,
GEROGIA 30577, USA
TEL +7068862101 FAX +7068860023
Supplier
Arabian Pumps
P O Box 11265 Jeddah 21453
Tel: 02 6512436 Fax: 6570436
Email : info@arabianpumps.com
www.arabianpumps.com
P O Box: 11265 Jeddah 21453 Tel : 6512436 / 6504713 Fax: 6570436 Email :info@arabianpumps.com
Al Khobar Branch : P O Box : 31481 Al Khobar 31952 Saudi Arabia Telefax: 03-8625284
naj
VENDOR : PATTERSON PUMP COMPANY
CONTENTS
4.0 Brochure
Summary
&
Equipment Description
Power: 35.4 hp
NPSHr: 12.1 ft 200 13.5" 50 60 65 70 75 80 82
12.5" 85
-- Design Curve -- 85
160 11.625" 82 80
Shutoff Head: 188 ft 75
10.6875" 70
Shutoff dP: 81.1 psi 120 65
20 hp 60
Min Flow: 248 US gpm
80 50 60 hp
BEP: 85.4% eff 25 hp
@ 992 US gpm 40 50 hp
30 hp 40 hp
NOL Pwr: 58.4 hp
NPSHr - ft
@ 1486 US gpm 0 40
-- Max Curve -- 20
Max Pwr: 62 hp
@ 1515 US gpm 200 400 600 800 1000 1200 1400 1600
US gpm
Refer to Working Pressure vs. Temperature chart for maximum rated working pressure. All data are subject to change. Consult factory
for certified data.
Performance Evaluation:
Flow Speed Head Pump Power NPSHr
US gpm rpm ft %eff hp ft
684 1780 176 79.3 38.2 12.9
570 1780 180 72.9 35.4 12.1
456 1780 183 63.7 33 11.5
342 1780 185 51.7 30.8 11.1
228 1780 --- --- --- ---
240
200 13.5"
Head - ft
50 60 65 70 75 80 82
85
12.5"
85
160
11.625" 82
80
75
70
120 10.6875"
65
20 hp 60
80 60 hp
25 hp 50
40 50 hp
30 hp 40 hp
0 40
NPSHr - ft
20
Refer to Working Pressure vs. Temperature chart for maximum rated working pressure. All data are subject to change. Consult factory for certified data.
Company: arabian pumps Patterson HVAC Pumps Model: V6B13A-RC
Name: Catalog: Patterson HVAC.60, vers 1 Speed: 1780 rpm
03/17/12 VIL - 1800 Dia: 13.1875 in
Design Point: 570 US gpm, 180 ft Size: 6x6x13.5
Impeller: D05-89858
3 Pumps in Parallel
180
160
140
Head - ft
120
100
80
60
40
20
0
US gpm 800 1600 2400 3200 4000
Refer to Working Pressure vs. Temperature chart for maximum rated working pressure. All data are subject to change. Consult factory for certified data.
Company: arabian pumps Patterson HVAC Pumps Model: V6B13A-RC
Name: Catalog: Patterson HVAC.60, vers 1 Speed: 1780 rpm
03/17/12 VIL - 1800 Dia: 13.1875 in
Size: 6x6x13.5
Impeller: D05-89858
VENDOR : PATTERSON PUMP COMPANY
Summary
&
Equipment Description
180
160
140
Head - ft
120
100
80
60
40
20
0
US gpm 200 400 600 800 1000 1200 1400 1600 1800
Refer to Working Pressure vs. Temperature chart for maximum rated working pressure. All data are subject to change. Contact factory for certified data.
Company: arabian pumps Patterson HVAC Pumps Model: V4B11A-CC
Name: Catalog: Patterson HVAC.60, vers 1 Speed: 1770 rpm
03/17/12 VIL - 1800 Dia: 9.625 in
Size: 4x4x11
Impeller: D05-90019
VENDOR : PATTERSON PUMP COMPANY
QECS-11S-155
N.T.S 0A 0B
E C S
P.O.Box 109297 - Jeddah 21351
Tel: 02 - 289-2200 / 289-2299
Fax: 02 - 629-3222 ECS
Email: info@ecsksa.com
Web: www.ecsksa.com
QECS-11S-155
N.T.S 07 08
E C S
P.O.Box 109297 - Jeddah 21351
Tel: 02 - 289-2200 / 289-2299
Fax: 02 - 629-3222 ECS
Email: info@ecsksa.com
Web: www.ecsksa.com
N.T.S 08 09
E C S
P.O.Box 109297 - Jeddah 21351
Tel: 02 - 289-2200 / 289-2299
Fax: 02 - 629-3222 ECS
Email: info@ecsksa.com
Web: www.ecsksa.com
QECS-11S-155
N.T.S 09 10
MS1 PUMP 1 PUMP 2 PUMP 3
INPUT TERMINALS
E C S
P.O.Box 109297 - Jeddah 21351
Tel: 02 - 289-2200 / 289-2299
Fax: 02 - 629-3222 ECS
Email: info@ecsksa.com
Web: www.ecsksa.com
QECS-11S-155
N.T.S 10 11
VOLT FREE CONTACTS
E C S
P.O.Box 109297 - Jeddah 21351
Tel: 02 - 289-2200 / 289-2299
Fax: 02 - 629-3222 ECS
Email: info@ecsksa.com
Web: www.ecsksa.com
QECS-11S-155
N.T.S 11 12
Item # Tag Description Qty Part No./Ref. Brand/Manufacturer
01 ENCLOSURE H 2000 X W 1000 X D 600mm CUBICAL 01 - SCHNEIDER ELECTRIC
02 - Weather Proof
03 QM MAIN DISCONNECT SWITCH 200AT-3P. 01 INS250 SCHNEIDER ELECTRIC
04 Q1-Q3 MOTOR CIRCUIT BREAKER 48---65AT 03 GV3P65+GVAD1010 SCHNEIDER ELECTRIC
05 KM1-KM4 CONTACTOR 38A 12 LC1D38M7 SCHNEIDER ELECTRIC
06 KM5 CONTACTOR 32A 03 LC1D32M7 SCHNEIDER ELECTRIC
07 VFD1-VFD3 VARIABLE SPEED DRIVE 30KW/40HP 03 ATV61HD30N4 SCHNEIDER ELECTRIC
08 PS POWER SUPPLY UNIT 220AC/24VDC 01 - LS
09 SS1-SS3 SELECTOR SWITCH 3 POS. A-O-H 03 - XINDALI
10 CB CONTROL MCB 6A-1P. 02 - SCHNEIDER ELECTRIC
11 R1-R3 CONTROL RELAY 14 PIN 24VDC 03 RXM4AB1BD SCHNEIDER ELECTRIC
12 R4-R18 CONTROL RELAY 14 PIN 220VAC 15 RXM4AB1P7 SCHNEIDER ELECTRIC
13 PB SPRING RETURN PUSH BUTTON LAMP TEST 01 - SASSIN
14 H INDICATION LAMP 13 - SASSIN
15 X1 POWER TERMINAL BLOCK 09 JXB-16M SASSIN E C S
16 X2 SIGNAL INPUT TERMINAL BLOCK 18 JXB-04M SASSIN P.O.Box 109297 - Jeddah 21351
Tel: 02 - 289-2200 / 289-2299
Fax: 02 - 629-3222 ECS
17 X3 BMS CONTACT TERMINAL BLOCK 24 JXB-04M SASSIN Email: info@ecsksa.com
Web: www.ecsksa.com
18 - FAN 01 - LEOPARD
19 - FILTER 01 - LEOPARD
20 T1-T3 STAR DELTA TIMER 03 - KAEL
21 - - - - -
22 - - - - -
23 - - - - -
24 - - - - -
25 - - - - -
QECS-11S-155
N.T.S 12 --
E C S
P.O.Box 109297 - Jeddah 21351
Tel: 02 - 289-2200 / 289-2299
Fax: 02 - 629-3222 ECS
Email: info@ecsksa.com
Web: www.ecsksa.com
QECS-11S-155
N.T.S 0B 0C
E C S
P.O.Box 109297 - Jeddah 21351
Tel: 02 - 289-2200 / 289-2299
Fax: 02 - 629-3222 ECS
Email: info@ecsksa.com
Web: www.ecsksa.com
QECS-11S-155
N.T.S 0C 01
VFD-1
QM
Disconnect
Switch
E C S
P.O.Box 109297 - Jeddah 21351
Tel: 02 - 289-2200 / 289-2299
Fax: 02 - 629-3222 ECS
Email: info@ecsksa.com
Web: www.ecsksa.com
POWER SUPPLY
3PHASE / 380V
U1 V1 W1 U2 V2 W2
PUMP 1
40HP-380V
QECS-11S-155
N.T.S 01 02
VFD-2
E C S
P.O.Box 109297 - Jeddah 21351
Tel: 02 - 289-2200 / 289-2299
Fax: 02 - 629-3222 ECS
Email: info@ecsksa.com
Web: www.ecsksa.com
U1 V1 W1 U2 V2 W2
PUMP 1
40HP-380V
QECS-11S-155
N.T.S 02 03
VFD-3
E C S
P.O.Box 109297 - Jeddah 21351
Tel: 02 - 289-2200 / 289-2299
Fax: 02 - 629-3222 ECS
Email: info@ecsksa.com
Web: www.ecsksa.com
U1 V1 W1 U2 V2 W2
PUMP 1
40HP-380V
QECS-11S-155
N.T.S 03 04
E C S
P.O.Box 109297 - Jeddah 21351
Tel: 02 - 289-2200 / 289-2299
Fax: 02 - 629-3222 ECS
Email: info@ecsksa.com
Web: www.ecsksa.com
QECS-11S-155
N.T.S 04 05
E C S
P.O.Box 109297 - Jeddah 21351
Tel: 02 - 289-2200 / 289-2299
Fax: 02 - 629-3222 ECS
Email: info@ecsksa.com
Web: www.ecsksa.com
QECS-11S-155
N.T.S 05 06
E C S
P.O.Box 109297 - Jeddah 21351
Tel: 02 - 289-2200 / 289-2299
Fax: 02 - 629-3222 ECS
Email: info@ecsksa.com
Web: www.ecsksa.com
QECS-11S-155
N.T.S 06 07
VENDOR : PATTERSON PUMP COMPANY
Expansion Tank
The goal in sizing any expansion or compression tank is to make the system able
to accommodate the expansion of the system water throughout the heating or
cooling cycles without allowing the system to exceed the pressure limits of the
lowest pressure-rated component in that system. The lowest rated component in
most systems is, by design, the pressure relief valve. The maximum system
pressure is normally set at 90% of the pressure relief valve rating at its point of
installation.
The Plain Steel Expansion Tank has been used for many years, and in some
systems has worked very well. Using a plain steel expansion tank makes the
system an air control system. One must control the air volume or air cushion
above the water level in the tank. The common face between this air cushion
and the water in the tank allows the air to be absorbed by the water. If the air is
not removed properly from the water and placed back into the air cushion, the
expansion tank will become waterlogged.
A waterlogged tank is an expansion tank that no longer has an air cushion large
enough to allow all the expanded water form the system to enter the tank without
exceeding the maximum system pressure. When this occurs the safety relief
valve will open and heated system water will be discharged to the drain.
The advantage of a plain steel tank is that the initial purchase cost is less than a
diaphragm/bladder tank, but in many cases the installed cost will offset this
advantage.
The Diaphragm/Bladder Expansion Tank has been developed to allow the
systems air cushion to be separated form the systems water. No waterlogging of
the tank can occur as the air is held between the tank wall and the outside of a
bladder placed inside the tank, while the system water is contained inside the
bladder. This changes the system to an air elimination system, as any air
extracted from the system water is passed out of the system into the
atmosphere.
The bladder tank is much smaller, usually around 50%, than a plain steel tank for
the same application as they are precharged with air to the system operating
pressure before the system is filled with water. The only water that needs to be
accommodated by a diaphragm/bladder tank is the expanded water.
The air elimination system allows the air vent and air separator to be placed at
the most advantageous point in the system for air removal, usually at the
system s high point where the pressure is the lowest or at the boiler outlet where
the water temperature is the highest. The expansion tank can now be placed at
floor level, since air no longer needs to be returned to the tank. The
diaphragm/bladder tank can also be placed at the most advantageous point in
the system.
Because of this The Point of No Pressure Change the system sees a pump
additive pressure from the pump discharge to the expansion tank connection.
From the expansion tank connection back to the pump suction, the system sees
a negative pressure change from the tank pressure, due to the friction loss when
there is flow.
With this loss of pump addictive pressure and the loss due to flow, it is usually
best to place the The Point of No Pressure Change or expansion tank system
connection as close to the pump suction as possible.
SUBMITTAL
DESCRIPTION CONSTRUCTION
Patterson Type NLA Tanks are ASME removable Shell: Carbon Steel
bladder type pre-charged expansion tanks. They Bladder: Heavy duty butyl
are designed to absorb the expansion forces and
control the pressure in heating/cooling systems. PERFORMANCE LIMITATIONS
The system’s expanded water (fully compatible Maximum Design Temperature: 240ºF
with water/glycol mixtures) is contained in a Maximum Design Pressure: 125 PSIG*
heavy-duty bladder preventing tank corrosion and
waterlogging problems. NLA expansion tanks *200 & 250 PSIG available
reduce tank sizes up to 80%.
SCHEDULE
Tank
Model Volume Tagging Information Quantity
Number Gallons
NLA 35 10
NLA 50 13
NLA 85 23
NLA 130 35
NLA 200 53
NLA 300 79
NLA 400 106
NLA 500 132
NLA 600 158
NLA 800L 211
TYPICAL SPECIFICATION
Furnish and install as shown on plans a ______________ gallon ___________” diameter X __________”
(high) pre-charged steel expansion tank with heavy-duty butyl rubber bladder. The tank shall have NPT
system connections and a .302”-32 charging valve connection (standard tire valve) to facilitate the on-site
charging of the tank to meet system requirements. The tank must be constructed in accordance with most
recent addition of Section VIII of the ASME Boiler and Pressure Vessel Code.
9201 Ayersville Rd Toccoa, GA 30577 (706) 886-2101 (706) 886-0023 FAX www.pattersonpump.com
101Ayersville
9201 TANK STRd GREENWOOD, IN 46143
Toccoa, GA 30577 (317)
(706) 888-9800
886-2101 (317)
(706) 888-9988
886-0023 FAX FAX www.westank.com
www.pattersonpump.com
SUBMITTAL
DESCRIPTION CONSTRUCTION
Patterson Type L-Series Tanks are ASME Shell: Carbon Steel
removable bladder type pre-charged expansion Bladder: Heavy duty butyl
tanks. They are designed to absorb the
expansion forces and control the pressure in PERFORMANCE LIMITATIONS
heating/cooling systems. The system’s expanded Maximum Design Temperature: 240ºF
water (fully compatible with water/glycol mixtures) Maximum Design Pressure: 125 PSIG
is contained in a heavy-duty bladder preventing 200 PSIG
tank corrosion and waterlogging problems. AV L 250 PSIG
expansion tanks reduce tank sizes up to 80%.
SCHEDULE
Shipping
Weight
Volume "B" "A" Syst. 125 PSI 200 PSI 250 PSI
Model Gal. Dia. Height Conn. (Lbs.) (Lbs.) (Lbs.)
NLA-2500 660 48" 102" 2" 1435 1847 2425
NLA-3000L 792 48" 122" 2" 1550 2152 2831
NLA-3000S 792 60" 80" 2" 2169 2477 2780
NLA-4000 1056 60" 102" 2" 2638 2850 3146
NLA-5000 1320 60" 125" 2" 3246 3430 3913
NLA-7500 1980 72" 127" 3" 4005 4413 5468
NLA-10000 2640 72" 159" 3" 4845 5439 6755
NLA-15000 3963 72" 233" 3" 5925 7810 9731
Notes: Tanks are factory pre-charged at 12 PSI and field adjustable.
Charging valve is .302"-32NC
TYPICAL SPECIFICATION
Furnish and install as shown on plans a ______________ gallon ___________” diameter X __________” (high) pre-
charged steel expansion tank with heavy-duty butyl rubber bladder. The tank shall have NPT system connections
and a .302”-32 charging valve connection (standard tire valve) to facilitate the on-site charging of the tank to meet
system requirements. The tank must be constructed in accordance with most recent addition of Section VIII of the
ASME Boiler and Pressure Vessel Code.
9201 Ayersville Rd Toccoa, GA 30577 (706) 886-2101 (706) 886-0023 FAX www.pattersonpump.com
VENDOR : PATTERSON PUMP COMPANY
Air Seperator
D
Inlet D Inlet
Outlet
H
Separator Separator Outlet F
E J Dia.
with Strainer NPT Boss
without Strainer G Dia.
NPT Boss
1/2” Dia.
E 1/2” Dia. E
NPT Boss
NPT Boss
A A
B C B C
L Pipe F Pipe
Size Size
E M
E
K Dia. H Dia.
P G Dia. Strainer J
NPT Boss NPT Boss
Dimensional 2” Rad 180 2” Rad 180
Deg. Apart Deg. Apart
Data
Model No. Pipe With Strainer—Dimensions in Inches Ship
Size A B C D E F G H J K L M P Wt.
TASS020 2 12 19 1/2 22 1/2 16 5/8 5 1/2 2 1/8 2 4 5/16 1 1/4 1 2 16 1/2 9 1/2 49
TASS025 2 1/2 12 19 1/2 22 1/2 16 5/8 5 1/2 2 3/8 2 1/2 4 1/16 1 1/4 1 2 1/2 16 1/2 9 1/2 64
TASS030 3 12 19 1/2 22 1/2 19 3/4 5 3/4 2 1/2 3 3 3/4 1 1/4 1 3 17 1/8 9 1/2 69
TASS040 4 14 29 32 21 3/4 9 1/8 2 1/2 4 4 1/4 1 1/2 2 4 19 1/2 11 1/2 111
TASS050 5 14 29 32 21 3/4 9 1/8 2 1/2 5 3 3/4 1 1/2 2 5 19 3/4 11 1/2 138
TASS060 6 20 41 44 28 13 1/4 2 1/2 6 6 1/4 2 2 6 25 18 236
TASS080 8 20 41 44 28 13 1/4 3 8 5 3/16 2 2 8 29 18 359
TASS100 10 30 58 60 1/2 41 19 3 1/2 10 9 1/8 2 2 10 25 1/2 24 663
TASS120 12 30 58 60 1/2 41 19 3 1/2 12 8 1/8 2 2 12 26 1/2 24 747
TASS140 14 36 75 1/2 78 46 3/8 22 3 1/2 14 10 3/16 2 2 14 42 1/4 30 1493
Model No. Pipe Without Strainer—Dimensions in Inches Ship Sizes 16, 18, 20 and larger
Size A B C D E F G H J Wt. available upon request
TAS020 2 12 19 1/2 22 1/2 16 5/8 5 1/2 4 5/16 1 1/4 1 9 1/2 41
TAS025 2 1/2 12 19 1/2 22 1/2 16 5/8 5 1/2 4 1/16 1 1/4 1 9 1/2 56
TAS030 3 12 19 1/2 22 1/2 19 3/4 5 3/4 3 3/4 1 1/4 1 9 1/2 59
TAS040 4 14 29 32 21 3/4 9 1/8 4 1/4 1 1/2 2 11 1/2 97
TAS050 5 14 29 32 21 3/4 9 1/8 3 3/4 1 1/2 2 11 1/2 118
TAS060 6 20 41 44 28 13 1/4 6 1/4 2 2 18 201
TAS080 8 20 41 44 28 13 1/4 5 3/16 2 2 18 299
TAS100 10 30 58 60 1/2 41 19 9 1/8 2 2 24 563
TAS120 12 30 58 60 1/2 41 19 8 1/8 2 2 24 647
TAS140 14 36 75 1/2 78 46 3/8 22 10 3/16 2 2 30 1366
9/2009
Applications Bulletin TAS 44 8-05
Wheatley Reducing
From Boiler
Valve
Wheatley Air
Cold Water
Separator
Supply
Strainer From
Removal Boiler
Wheatley Air
Separator
Strainer
Blowdown Connection
Removal
To System
To System
Air Separator
Instruction Sheet
(1.) Install Wheatley Air Separator in the system
between Wheatley Expansion Tank(s) and
Typical Specification:
pumps(s).
Furnish and install on plans a tangential air
(2.) Install Expansion Tank(s) as close to Air separator consisting of a steel tank____”
Separator as possible with any horizontal piping diameter by ____” long.
pitching up to tank.
The air separator shall have ___”
(3.) If a shut-off valve is installed in the line, it must (NPT/Flanged) tangential inlet and outlet
be fully open when system is in operation. connections. The air separator can also be
equipped with an optionable, removable
(4.) A connection for a Wheatley Air Release Valve is
stainless steel strainer with 3/16” diameter
at the top of the Air Separator.
perforations. When a strainer is specified,
installer shall remove and clean the strainer
Initial Start-up:
after 24 hours operation and after 30 days
When system is first filled, release air from heating units operation. There shall be a bottom connection
and high points if necessary for quick filling. Any for routine blowdown cleaning of the unit.
entrained air is separated continuously thereafter, as
water is pumped through the Air Separator. The air separator must be constructed and
stamped for 125 psig in accordance with the
Service: ASME Boiler and Pressure Vessel Code.
When a strainer is specified, it is recommended that the
Each air separator shall be Wheatley Gaso
installer remove and clean the strainer after 24 hours of
Model Number_______________or equal.
operation and after 30 days of operation. Also, periodically
open blowdown valve to purge Air Separator of foreign
particles.
Brochure
Benefits
Horizontal Split High-efficiency design minimizes energy consumption
Case Double
Suction Pumps Back pullout configuration for easy access and
maintenance (end suction and in-line only)
• Regreaseable ball bearings set in integrally cast bearing housings Precision bearings and machining limit shaft deflection
• Standard 175 psi case working pressure; optional 250 psi (all models) to only 0.002” at the seal face
• Carbon steel shaft; stainless steel optional
• Flows to 5,000 GPM, heads to 175’ TDH
Bearing housing mounts directly to the pump volute to
save space and provide proper alignment (end suction
only)
Features
Volute mount with rear support foot
End Suction Pumps Standard case wear ring and grease-lubricated bearings
Type 21 Viton seal Cast iron body with ANSI flanged connections
Standard split-phase motor, UL and CSA listed, Working pressure is 175 psig @ 250°F
ODP, 115-1-60 with thermal protection
Hand wheel operator
Rated to 125 psi and 250° F
Enclosed impellers
Body is designed to use bolts—no threaded Integral drain port on 1/2”–3” sizes
studs required
Ball valve design with bronze body
Corrugated stainless steel permanent strainer
allows for maximum surface area Metering ports with drip caps
Features
Available in full and reducing sizes, 2”–12”
Support foot
Sizes larger than 12” are also available Carbon steel shell and tubesheet
Air Scoops ASME code stamped, 150 psi, Section VIII, Div I
Benefits
Efficiently separates air from water in hydronic Steam to water or liquid to liquid
systems
Double wall tubes available (copper only)
Internal agitator disperses entrapped air
Provided with 125-lb. ANSI flanges High thermal efficiency and high surface
density requires 1/5 - 1/2 of the the floor space
of equivalent duty heat transfer equipment
Expansion Tanks
Features It is possible to heat or cool two or more fluids
Available in both diaphragm within the unit by simply installing divider
(partial acceptance) and sections between the plates
seamless bladder (full Features
acceptance) styles and plain steel True counterflow of fluids, reducing amount of
transfer surface required
ASME code stamped, 125 psi
standard; higher working pressures Lightweight construction
available
Adjust unit’s thermal performance by adding or
Standard bladder tank sizes up to 528 gal. removing plates
(larger sizes available)
Free-flow unit handles large particles and
Plain steel tank sizes up to 400 gal. slurries
Accessories
Flexible Connectors. Automatic Vent Valves.
Standard neoprene or nylon (other materials Float-actuated, automatic air venting through
available) connectors reduce noise and top-mounted purge valve. Under system pressure,
vibration. Rated to 225 psi at temperatures up the valve plug seals and prevents water flow.
to 240°F. Solid plate steel flanges provide a Also serves as a vacuum break. Available in sizes
fluid tight connection. Stainless steel flexible 1⁄8” - 1” NPTF.
connectors also available. Flexible Connector
Other Specialty Products.
Makeup Water Pressure Reducing Valves. Also available are flowmeters, tank drainers, tank air control
Tight seating check valve with integral strainer and unitized fittings and related specialties.
design for simplified servicing. Set at 15 psi. Sizes 1⁄2” and
3⁄4”. Rated for 212°F and 100 psi.
COOLING
Packaged Chillers Packaged Condenser Water Systems
Choice of air-cooled or water-cooled Components designed to engineer/owner
configurations requirements
Economizer cycle available Include centrifugal separators, sand filter systems
Chemical treatment feed systems and chemical treatment systems, when needed
All components easily accessible for Tower fan speed controls and pump sequencing
maintenance, with bridge cranes for simplified for control with economy
equipment removal
With or without UL-QRNZ enclosures and all Customized Packaged Systems
utilities Our experience offers you rich capability in
MCC control center precision control and efficiency, including
Scope can include optional mounting of cooling outstanding expertise in applying variable-speed
towers drives. Contact us for special package system
Pre-insulated piping needs for domestic or international installation.
�������������
�����������������
�����
���������
����������������� ����
����� ����������
������������
��������
��������������
������ �������������
��������������
�������������
������
���������
����
����������
������������ �����
��������
�������������� ������������������
�������
�������� ����������������
�������������