Documente Academic
Documente Profesional
Documente Cultură
(https://theconstructor.org/)
According to Eurocode 7, engineering report of foundation investigation need to be prepared and submitted to the
client or owner as part of design process. The report should consider all information and data from historical
records, site observation, trial pits, boreholes, and laboratory tests.
In this article, the arrangement and contents of engineering report of foundation investigation will be discussed.
Introduction
Recommendation
Conclusion
https://theconstructor.org/geotechnical/foundation-investigation-engineering-report/21030/?utm_source=pushengage&utm_medium=push_notification… 1/4
2/22/2018 How to Prepare Engineering Report of Foundation Investigation?
Introduction
There are number of major points which need to be explained in this part and these points are as follow:
It should be stated clearly the client or individual for whom the investigation is conducted.
The introduction should explain whether the investigation is limited and carried out to achieve certain data
to perform evaluation by the designer, or it is a thorough investigation with boreholes, tests, and analysis of
results to consider suitable methods of design.
If the investigation is limited due to financial restrictions or other factors and the engineer find out that the
investigation is insufficient, then he should state the factors that cause limitation of the investigation.
There are features and data related to the site that need to be recorded in this section. General site features and
information may include:
Beneficial information related to the previous application of site can be obtained from historical records and
such information needs to be explained.
General configuration and surface feature of the site. For instance, old buildings, mine shafts, quarries,
filled areas, watercourses, roads, tracks, hedges, and trees should be recoded.
If the site experienced erosion, earthquakes, and slope instability, it should be clearly and thoroughly
described in addition to record cracks of surrounding building due to settlements.
In this part of the engineering report, the following information should be provided:
Compare available information, which may be in form of memoir and maps, to the information obtained
from boreholes.
If there are any faults, mines, springs, swallow holes, quarries, and other features at the project site, then
they should be taken into consideration if they influence in the foundation work.
It is required to provide general description (not detailed description) of soil site which should include
changes in levels of different strata, ground water table, and ground configuration.
if several boreholes have been taken, then it is a good strategy to draw number of these through the
section of the site.
https://theconstructor.org/geotechnical/foundation-investigation-engineering-report/21030/?utm_source=pushengage&utm_medium=push_notification… 2/4
2/22/2018 How to Prepare Engineering Report of Foundation Investigation?
This is to show configuration and level variation of the strata that is crucial to the engineering problem.
Nonetheless, these diagrams should not include detailed information of soil profile for instance changed in ground
water table in successive strata because such information could lead to costly error.
This part of the engineering report should include the following information:
Detailed test results should not be provided in this section and they should be given in appendices.
If non-standard test procedure is utilized for any particular test, then the test procedure should be
explained.
This part by far the most significant components of the engineering repot for foundation design and construction.
The discussion should be clear and concise and efforts should be made to prevent the use of words such as (but)
and (if).
It is recommended to divide this section into differ parts so as to make it more clear, readable, and
understandable.
Introduction: in this part of discussion description of the main structure and related imposed loadings
should be provided
Another subheading is special structures if present such as electricity generation station and turbine house.
These structures usually require special foundations.
Note:
In the discussion, the discussion about inappropriate foundations should be avoided since it would be waste of
time.
The discussion should clearly state type and depth of foundation, allowable bearing pressure, and anticipated
settlement due to allowable pressure. Moreover, the benefit of adopting deeper foundation to allow for higher
bearing pressure or decreasing foundation settlement.
https://theconstructor.org/geotechnical/foundation-investigation-engineering-report/21030/?utm_source=pushengage&utm_medium=push_notification… 3/4
2/22/2018 How to Prepare Engineering Report of Foundation Investigation?
Furthermore, if the pile foundation is adopted, then the engineering report should state bearing strata, to which
the pile is driven, pile penetration likelihood into the strata, working load magnitude per pile,
Finally, the pile installation difficulty and any possible influence on the surrounding structure should be specified.
Recommendations
The facts that have been achieved in the report should be used as base for the foundation design
recommendation. It is advised that, the head of investigation and the design have good communication
throughout the entire stages of the work.
Conclusion
The major points of discussion will be summarized in this section provided that the discussion is lengthy.
Findings which are drawn from the investigation will be provided as well.
https://theconstructor.org/geotechnical/foundation-investigation-engineering-report/21030/?utm_source=pushengage&utm_medium=push_notification… 4/4