Documente Academic
Documente Profesional
Documente Cultură
RODS
Code Instruction ○○○○○○○○○○○○○○○○○○○○36
Drlfter Rod ○○○○○○○○○○○○○○○○○○○○○○37/38
Bench Drilling Rod ○○○○○○○○○○○○○○○39/40
Production Drilling Rod ○○○○○○○○○○○○○○○○41
Extension Rod ○○○○○○○○○○○○○○○○○○○○○42
1
Shank Adapter
Code Instruction ○○○○○○○○○○○○○○○○○○○○○44
Shank Adaptor ○○○○○○○○○○○○○○○○○○45/52
Shank Adaptor ○○○○○○○○○○○○○○○○○○○○○53
Coupling Sieeve
Code Instruction ○○○○○○○○○○○○○○○○○○○○○55
Coupling Sleeve ○○○○○○○○○○○○○○○○○○○○○55
IR 22 08-40(01)
Code Instruction
TR 22 08-7
Taper Degree
Effective Length
Hexagonal Across Flat Size 22mm
Tapered Rod
Taper Diameter
Socket Diameter
Gauge Diameter
Face Type 01-Chisel Cross
Tapered Bits
ROCK TOOLS
B32-H22-12 H
Rock Formation
S-Soft
A-Medium Hard to Hard
H-Extremely Hard
M-Abrasive
Taper Degree
Socket Diameter
H22-Hexagonal 22mm
H22-Hexagonal 25mm
Gauge Diameter
Taper Bits
5
ROCK TOOLS
17
1600 5'3'' 39 1' /32'' IR 2216-39(01) 5.5
1
2400 7'10'' 38 1' /2'' IR 2224-38(01) 8
29
3200 10'6'' 37 1' /64'' IR 2232-37(01) 10.75
Shank 27
4000 13'1'' 36 1' /64'' IR 2240-36(01) 12
22mm×108mm
3
4800 15'9'' 35 1' /8'' IR 2248-35(01) 15.7
11
800 2'7'' 34 1' /32'' IR 2208-34(01) 3.05
19
1600 5'3'' 33 1' /64'' IR 2216-33(01) 5.5
1
2400 7'10'' 32 1' /4'' IR 2224-32(01) 8
7
3200 10'6'' 31 1' /32'' IR 2232-31(01) 10.75
Shank
22mm×82.5mm 3
4000 13'1'' 30 1' /16'' IR 2240-30(01) 12.9
9
5600 15'9'' 29 1' /64'' IR 2248-29(01) 18.2
6
ROCK TOOLS
7 21
200 7' /8'' 17 /32'' PID(1)2220-17 0.6
27 21
250 9' /32'' 17 /32'' PID(1)2225-17 0.77
13 21
300 11' /16'' 17 /32'' PID(1)2230-17 0.9
7 25
200 7' /8'' 20 /32" PID(1)2220-20 0.6
Shank 27 25
250 9' /32'' 20 /32" PID(1)2225-20 0.77
22mm×108mm
13 25
300 11' /16'' 20 /32" PID(1)2230-20 0.9
7 7
200 7' /8'' 22 /8" PID(1)2220-22 0.6
27 7
250 9' /32'' 22 /8" PID(1)2225-22 0.77
13 7
300 11' /16'' 22 /8" PID(1)2230-22 0.9
7 21
200 7' /8'' 17 /32" PID(2)2220-17 0.5
27 21
250 9' /32'' 17 /32" PID(2)2225-17 0.77
13 21
300 11' /16'' 17 /32" PID(2)2230-17 0.9
7 25
200 7' /8'' 20 /32" PID(2)2220-20 0.6
Shank 27 25
250 9' /32'' 20 /32" PID(2)2225-20 0.77
22mm×82.5mm
13 25
300 11' /16'' 20 /32" PID(2)2230-20 0.9
7 7
200 7' /8'' 22 /8" PID(2)2220-22 0.6
7 27 7
250 9' /32'' 22 /8" PID(2)2225-22 0.77
13 7
300 11' /16'' 22 /8" PID(2)2230-22 0.9
ROCK TOOLS
8
ROCK TOOLS
Tapered Bit 4 4 6 6 7 11 12
Tapered Bit
Dia. Weight
Description mm in
Part No.
(kg)
1
38 1 /2" B01-32-22x7 0.4
1
38 1 /2" B01-34-22x7 0.4
5
41 1 /8" B01-36-22x7 0.42
5
41 1 /8" B01-38-22x7 0.42
5
41 1 /8" B01-40-22x7 0.42
3
45 1 /4" B01-42-22x7 0.43
3
45 1 /4" B01-44-22x7 0.43
13
46 1 /16" B01-46-22x7 0.44
1
32 1 /4" B02-32-22x7 0.3
19
33 1 /64" B02-33-22x7 0.32
11
34 1 /32" B02-34-22x7 0.34
27
36 1 /64" B02-36-22x7 0.36
1
38 1 /2" B02-38-22x7 0.42
37
40 1 /64" B02-40-22x7 0.43
21
42 1 /32" B02-42-22x7 0.44
11
43 1 /16" B02-43-22x7 0.45
9 44 1
47
/64" B02-44-22x7 0.45
3
45 1 /4" B02-45-22x7 0.46
ROCK TOOLS
1
32 1 /4" 2x7 4x7 1 1 35 TB32H22GL6 0.22
11
34 1 /32" 2x7 4x7 1 1 35 TB34H22GL6 0.29
27
36 1 /64" 2x7 5x7 1 1 30 TB36H22GL7 0.35
27
36 1 /64" 2x8 4x8 1 1 35 TB36H22GL6 0.35
1
6 38 1 /2" 2x8 4x8 1 1 35 TB38H22GL6 0.4
1
38 1 /2" 2x7 5x8 1 2 30 TB38H22GL7 0.4
37
40 1 /64" 2x8 4x9 1 1 35 TB40H22GL6 0.42
37
40 1 /64" 2x8 5x9 1 2 30 TB40H22GL7 0.42
7
48 1 /8" 2x9 5x9 1 1 30 TB48H22GL7 0.55
1
32 1 /4" 2x7 5x7 1 1 35 TB32H22GL7 0.22
27
36 1 /64" 1x8 3x8 1 2 30 TB36H22GL4 0.35
27
36 1 /64" 2x7 5x7 1 2 35 TB36H22GL7 0.35
1
38 1 /2" 1x8 3x8 1 2 30 TB38H22GL4 0.39
1
38 1 /2" 2x7 5x7 1 2 30 TB38H22GL7 0.39
5
41 1 /8" 1x8 3x9 1 2 30 TB41H22GL4 0.41
7
5
41 1 /8" 2x8 5x9 1 2 30 TB41H22GL7 0.41
21
10
42 1 /32" 1x9 3x9 1 2 30 TB42H22GL4 0.42
11
43 1 /16" 1x9 3x10 1 2 30 TB43H22GL4 0.43
11
43 1 /16" 2x8 5x9 1 2 30 TB43H22GL7 0.43
3
45 1 /4" 1x10 3x10 1 2 30 TB45H22GL4 0.45
3
45 1 /4" 2x9 5x9 1 2 30 TB45H22GL7 0.45
ROCK TOOLS
Tapered Button Bit
1
32 1 /4" 1x7 3x7 1 1 40 TB32H22GL4 0.22
11
43 1 /16" 2x7 5x9 1 1 30 TB43H22GL7 0.42
3
45 1 /4" 2x9 5x9 1 2 30 TB45H22GL7 0.45
11
ROCK TOOLS
1
38 1 /2" 2x8 6x9 2 1 35 TB38H22GL8 0.39
5
11 41 1 /8" 2x8 6x8 2 1 35 TB41H22GL8 0.41
11
43 1 /16" 2x8 6x8 2 1 35 TB43H22GL8 0.43
3
45 1 /4" 2x9 6x9 2 1 35 TB45H22GL8 0.45
1
29 1 /8" 1x7 3x7 1 1 40 TB29H22GL4 0.2
3
30 1 /16" 1x7 3x7 1 1 40 TB30H22GL4 0.21
1
32 1 /4" 2x7 5x7 1 1 35 TB32H22GL7 0.22
1
32 1 /4" 2x7 4x7 1 1 35 TB32H22GL6 0.22
1
32 1 /4" 2x7 6x7 2 1 35 TB32H22GL8 0.22
3
34 1 /8" 2x7 4x8 1 1 35 TB34H22GL6 0.29
3
34 1 /8" 2x7 5x7 1 1 35 TB34H22GL7 0.29
3
34 1 /8" 2x7 6x7 2 1 35 TB34H22GL8 0.29
27
36 1 /64" 2x8 4x8 1 1 35 TB36H22GL6 0.35
27
36 1 /64" 2x7 5x9 1 1 35 TB36H22GL7 0.35
27
12 36 1 /64" 2x7 6x8 2 1 35 TB36H22GL8 0.35
1
12
38 1 /2" 2x8 4x9 1 1 35 TB38H22GL6 0.39
1
38 1 /2" 2x8 5x8 1 1 35 TB38H22GL7 0.39
1
38 1 /2" 2x7 6x8 2 1 35 TB38H22GL8 0.39
37
40 1 /64" 2x8 4x9 1 1 35 TB40H22GL6 0.4
37
40 1 /64" 2x8 6x8 2 1 35 TB40H22GL8 0.4
5
41 1 /8" 2x8 5x8 1 1 35 TB41H22GL7 0.41
21
42 1 /32" 2x8 6x8 2 1 35 TB42H22GL8 0.42
11
43 1 /16" 2x8 5x8 1 1 35 TB43H22GL7 0.43
3
44 1 /4" 2x9 6x9 2 1 35 TB44H22GL8 0.44
3
45 1 /4" 2x9 5x9 1 1 35 TB45H22GL7 0.45
ROCK TOOLS
Tapered Cross Bit
B02-35-R25
Thread Type
Gauge Diameter
Face Type 01-Chisel Cross
Tapered Bits
R25 Thread
3
35 1 /8" 10 15 1 2 B02-35-R25 0.6
1
38 1 /2" 10 18 1 2 B02-38-R25 0.7
5
41 1 /8" 10 18 1 2 B02-41-R25 0.8
3
45 1 /4" 11 20 1 4 B02-45-R25 0.9
13 7
48 1 /8" 14 22 1 4 B02-48-R25 1
R28 Thread
1
38 1 /2" 10 18 2 1 B02-38-R28 0.7
5
41 1 /8" 10 18 2 1 B02-41-R28 0.8
3
45 1 /4" 11 20 1 4 B02-45-R28 0.9
7
48 1 /8" 14 22 1 4 B02-48-R28 1
Taper X Bits
Dia. Insert Flushing Hole Weight
Description mm in Width mm Height mm Centre Gauge
Part No.
(kg)
R32 Thread
T38 Thread retrac skirt
11
43
64 12 1/16
2"" 10
14 18
22 1 4 B02-43-R32 0.85
BR02-64-T38 2.3
3
45
76 1 3"
/4" 11
14 20
25 1 4 B02-45-R32 0.9
BR02-76-T38 2.9
7
48 1 /8" 14 T45 Thread
22 retrac1 skirt 4 B02-48-R32 1
51
76 2"
3" 14 22
25 1 4 B02-51-R32 1.1
BR02-76-T45 2.9
1
57
89 2
3 /42" 14 22
25 1 4 B02-57-R32 1.3
BR02-89-T45 3.5
64 2 1/2" 14 22 1 4 B02-64-R32 2
T38 Thread
1
64 2 /2" 14 22 1 4 B02-64-T38 2.1
T45 Thread
Threaded X Bit 14
Dia. Insert Flushing Hole Weight
Description mm in Width mm Height mm Centre Gauge
Part No.
(kg)
Retrac
T38 Thread skirtskirt
retrac
1
89 3 /2" 14 25 1 4 BR02-89-T45 3.5
ROCK TOOLS
Extension Drilling Tools
Code Instruction
BDR 120 T51 A
Rock Formation
S-Soft
A-Medium Hard to Hard
Extremely Hard
M-Abrasive
Thread Type
Gauge Diameter
Retrac Body
Drop Center
Button Bits
RH,H
A,
H,
RA,A
- S, - RS,S
- + - +
NOTE:
Generally, the larger the number of gauge buttons the better overall performance, especially in hard rock.
ROCK TOOLS
38 41 43 45 mm normal body
H 1
43 2x8 4x10 1 2 30 B43R25S 0.55
11/16"
1
43 2x8 5x9 1 2 30 B43R25H 0.57
11/16"
1
43 3x8 6x9 3 1 30 B43R25A 0.6
11/16"
A 45 1 3/4" 2x9 4x11 1 2 30 B45R25S 0.6
19
ROCK TOOLS
38 41 43 45 mm normal body
20
ROCK TOOLS
5
41 1 /8" 2x8 4x9 1 2 30 B41R32S 0.6
5
41 1 /8" 2x7 6x8 2 2 30 B41R32A 0.63
3
45 1 /4" 2x9 4x10 1 2 30 B45R32S 0.76
3
45 1 /4" 2x9 5x11 1 2 30 B45R32H 0.8
3
H 45 1 /4" 3x8 6x10 3 1 30 B45R32A 0.78
3
45 1 /4" 2x8 6x9 30 B45R32A2 0.78
7
48 1 /8" 2x9 4x11 1 2 30 B48R32S 0.8
A 48 7
1 /8" 2x10 5x11 1 2 30 B48R32H 0.85
7
48 1 /8" 3x8 6x10 3 1 35 B48R32A 0.84
7
48 1 /8" 2x8 6x9 2 2 30 B45R32A2 0.81
A2
51 2" 2x9 4x11 1 2 30 B51R32S 1
21
51 2" 2x10 5x11 1 2 30 B51R32H 1.03
H
64 2 1/2" 4x10 8x11 2 1 35 B64R32H 2
1
64 2 /2" 3x11 6x12 3 1 35 B64R32A 2
A
64mm retrac body
1 3x10
64 2 /2" 6x11 3 0 35 BD64R32S 2.7
1x7
64 2 1/2" 4x10 8x10 2 1 35 BR64R32H 2.8
1
64 2 /2" 4x10 6x12 3 1 35 BDR64R32A 2.8
22
ROCK TOOLS
Reaming Equipment
Reaming Equipment
Dia. Lenth
Length Weight
Description mm in mm
Part No.
(kg)
64 2 1/2" RB02-64 1
89 3 1/2" Rb02-89 2
89 3 1/2" RBN8-89 2
1 3x10
64 2 /2“ 6x11 3 0 35 BD64T38S 2
1x7
S 1
64 2 /2“ 4x10 8x11 2 1 35 B64T38H 2
1
64 2 /2“ 3x10 6x12 3 1 35 B64T38A 2
1 3x10
64 2 /2“ 6x11 3 0 35 BDR64T38S 2.5
1x7
1
64 2 /2“ 4x10 8x11 2 1 35 BR64T38H 2.5
1
64 2 /2“ 3x10 6x12 3 1 35 BR64T38A 2.5
1 4x11
89 3 /2" 8x12 4 0 35 B89T38S 3.3
2x10
1
89 3 /2" 6x11 9x12 3 1 35 B89T38H 3.3
S 1
89 3 /2" 5x12 8x12 2 1 35 B89T38A 3.3
1
89 3 /2" 5x12 8x12 4 0 35 BD89T38A 3.3
1 4x11
89 3 /2" 8x12 4 0 35 BR89T38S 4.4
2x10
1
89 3 /2" 6x11 9x13 3 1 35 BR89T38H 4.4
1
89 3 /2" 5x12 8x12 4 0 35 BDR89T38A 4.4
1
89 3 /2" 5x12 8x12 2 1 35 BR89T38A 4.4
26
ROCK TOOLS
1
89 3 /2" 6x11 8x12 4 0 35 B89T45S 3.3
1
89 3 /2" 6x12 9x13 3 1 35 B89T45H 3.3
S 1
89 3 /2" 5x12 8x13 2 2 35 B89T45A 3.3
1
89 3 /2" 6x11 8x12 4 0 35 BR89T45S 5.2
1
89 3 /2" 6x12 9x12 3 1 35 BR89T45H 5.2
1
89 3 /2" 5x12 8x12 2 1 35 BR89T45A 5.2
28
ROCK TOOLS
1
89 3 /2" 6x11 8x12 4 0 35 B89T51S 4.3
1
89 3 /2" 6x12 9x13 3 1 35 B89T51H 4.3
S
89 3 1/2" 5x12 8x13 4 0 35 BD89T51A 4.3
1
89 3 /2" 5x12 8x13 2 1 35 B89T51A 4.3
1
89 3 /2" 6x11 8x12 4 0 35 BR89T51S 5.3
1
89 3 /2" 6x11 9x12 3 1 35 BR89T51H 5.3
1
89 3 /2" 5x12 8x13 4 0 35 BDR89T51A 5.3
1
89 3 /2" 5x12 8x13 2 1 35 BR89T51A 5.3
1
115 4 /2" 7x13 8x14 2 4 35 B115T51A 7.3
1
115 4 /2" 8x13 9x14 3 2 35 BR115T51H 10.5
1
115 4 /2" 7x13 8x14 4 2 35 BR115T51A 10.5
normal body
1
115 4 /2" 4x14+3x12 8x14 4 0 40 BD115ST58S 7.1
1
115 4 /2" 8x14 9x14 3 0 35 B115ST58H 7.1
1
S 115 4 /2" 7x13 8x14 2 2 35 B115ST58A 7.1
retrac body
1
115 4 /2" 4x14+3x12 8x14 4 0 40 BDR11ST58S 9.5
1
115 4 /2" 8x14 9x14 3 0 35 BR115ST58H 9.5
31 115 1
4 /2" 7x13 8x14 2 2 35 BR115ST58A 9.5
normal body
1
115 4 /2" 4x14+3x12 8x14 4 0 40 BD115G60S 9.1
1
115 4 /2" 8x14 9x14 3 2 35 B115G60H 9.1
S 115 4 /2"
1
7x13 8x14 2 4 35 B115G60A 9.1
retrac body
1
115 4 /2" 4x14+3x12 8x14 4 0 40 BDR115G60S 11.4
1
115 4 /2" 8x14 9x14 3 0 35 BR115G60H 11.4
115 4 /2"
1
7x13 8x14 2 2 35 BR115G60A 11.4
32
127 5" 4x14+3x12 8x14 4 0 40 BDR127G60S 13.5
normal body
retrac body
33
ROCK TOOLS
SRODS
Code Instruction ○○○○○○○○○○○○○○○○○○○○36
35 Drlfter Rod ○ ○ ○○○○○○○○○○○○○○○○○○○○37/38
Bench Drilling Rod ○○○○○○○○○○○○○○○39/40
Production Drilling Rod ○○○○○○○○○○○○○○○○41
Extension Rod ○○○○○○○○○○○○○○○○○○○○○42
ROCK TOOLS
MF RODS
Code Instruction
MR45-15-T45/T45
Button Bits
EXTENSION RODS
EH35-30-R32/R38
36
Cross-Section Shape
H-Hexagonal
R-Round
Extension Rods
ROCK TOOLS
DRIFTER ROD
Drifter Rod
Length Diameter
Description mm ft mm in
Part No. Weight(kg)
Drifter rod,R32-Hex25-R25
2100 6'10 5/8" 25 1" EH25-21-R25/R32 8.6
5
2200 7'2 /8" 25 1" EH25-22-R25/R32 9
3
2600 8'6 /8" 25 1" EH25-26-R25/R32 10
1
2800 9'2 /4" 25 1" EH25-28-R25/R32 10.8
3 1
2600 8'6 /8" 28 1 /8" EH28-26-R28/R32 13.6
1
3050 10' 28 1 /8" EH28-30-R28/R32 17
1
3700 12' 28 1 /8" EH28-37-R28/R32 18.5
1
4305 14' 28 1 /8" EH28-43-R28/R32 23.5
Drifter rod, R38 - Hex 32 - R32 3
3050 10' 32 1 /8" EH32-30R32/R38 19.5
1
3700 12' 32 1 /4" EH32-37R32/R38 24
1
4305 14' 32 1 /4" EH32-43R32/R38 27.9
1
4915 16' 32 1 /4" EH32-49R32/R38 31.8
37
ROCK TOOLS
DRIFTER ROD
Drifter Rod
Length Diameter
Description mm ft mm in
Part No. Weight(kg)
3
4305 14' 35 1 /8" EH35-43R32/R38 33.8
3
4915 16' 35 1 /8" EH35-49R32/T38 38.6
3
6095 20' 35 1 /8" EH35-60R32/T38 48
MF Drifter rod,, T38 - Hex 35 - R32
3700 12' 35 1 3/8" MH35-37MT38/FR32 29.2
3
4305 14' 35 1 /8" MH35-43MT38/FR32 34
3
6095 20' 35 1 /8" EH35-60-MT38/FR32 48
38
ROCK TOOLS
Bench Drilling Rod
1
3050 10' 32 1 /4" ER32-30R32/R32 17.8
1
3660 12' 32 1 /4" ER32-36R32/R32 21.3
Extension rod, MR32 - Round 32 - FR32 1
3050 10' 32 1 /4" MR32-30R32/R32 17.9
1
3660 12' 32 1 /4" MR32-36R32/R32 21.44
1
4270 14’ 32 1 /4" MR32-42R32/R32 25
Extension rod, R38 - Round 39 - R38 17
3050 10' 39 1 /32" ER39-30R38/R38 25.5
17
3660 12' 39 1 /32" ER39-36R38/R38 30.6
17
4270 14' 39 1 /32" ER39-43R38/R38 35.4
MF rod,MR38 - Round39 - R38 17
3050 10' 39 1 /32" MR39-30MR38/FR38 26.5
17
4270 14' 39 1 /32" MR39-43MR38/FR38 36.4
Extension rod, T38 - Round 39 - T38 17
3050 10' 39 1 /32" ER39-30T38/T38 25.5
17
3660 12' 39 1 /32" ER39-36T38/T38 30.6
17
4270 14' 39 1 /32" ER39-43T38/T38 35.4
39
ROCK TOOLS
17
3660 12' 39 1 /32" MR39-36MT38/FT38 31.6
17
4270 14' 39 1 /32" MR39-43MT38/FT38 36.4
Extension rod, T45 - Round 46 - T45
3050 10' 46 1 3/4" ER46-30T45/T45 35.8
3
3660 12' 46 1 /4" ER46-36T45/T45 43
3
4265 14' 46 1 /4" ER46-42T45/T45 50.1
3
6095 20’ 46 1 /4" ER46-60T45/T45 71.6
MF-rod, T45 - Round 46 - T45 3
3050 10' 46 1 /4" MR46-30MT45/FT45 36.4
3
3660 12' 46 1 /4" MR46-M36T45/FT45 43.7
3
4265 14' 46 1 /4" MR46-42MT45/FT45 50.7
3
6095 20' 46 1 /4" MR46-60MT45/FT45 72.2
Extension rod, T51 - Round 52 - T51
3660 12' 52 2" ER52-36T51/T51 54.2
1
1220 4' 32 1 /4" ER32-12R32/R32 7.32
1
1525 5' 32 1 /4" ER32-15R32/R32 9.15
1
1830 6' 32 1 /4" ER32-18R32/R32 10.98
MF ROD MR32- Round 32-FR32 1
915 3' 32 1 /4" MR32-09R32/R32 5.45
1
1220 4' 32 1 /4" MR32-12R32/R32 7.2
1
1525 5' 32 1 /4" MR32-15R32/R32 9
1
1830 6' 32 1 /4" MR32-18R32/R32 10.7
Extension rod, T38 - Round 39 - T38 17
1220 4' 39 1 /32" ER39-12T38/T38 10.2
17
1525 5' 32 1 /32" ER39-15T38/T38 9
17
1830 6' 39 1 /32" ER39-18T38/T38 15.3
MF ROD MT38- Round 39-FT38 17
1220 4' 39 1 /32" MR39-12MT38/FT38 11.2
17
1525 5' 39 1 /32" MR39-15MT38/FT38 9.5
17
1830 6' 39 1 /32" MR39-18MT38/FT38 16.3
MF ROD MT45- Round 45-FT45 3
1525 5' 46 1 /4" MR46-15MT45/FT45 18.5
3
1830 6' 46 1 /4" MR46-18MT45/FT45 22.2
Extension Rod
March 5, 2010
In order to make customers familiar with our warranty and claim settlement, we
indicate the conditions and procedures in details as below.
1. Full compensation shall be made as following condition:
Rod breakage when lifespan of the rod used is less than 1/3 of its normal in
comparison to the average lifetime of batch rods or samples which JSI delivered to the
same client under the same working condition (same rock, same drilling machine and
same driller).
2. Partial compensation shall be made in accordance with wear rate of rod thread
when the rod is used in weathered rock, limestone or other soft rocks and broken.
3. Generally, compensation shall not be made for breakage of rod, of which the thread
is worn seriously.
4. Should the same problem occur for initial rods out of any bulk order when customer
starts using the rods (i.e. first two pieces of rods prematurely damaged in the same
way), please contact us or your suppliers immediately and stop using the remaining
products, we will provide timely service and settlement (such as replacing the rods).
Otherwise, we will not bear the responsibility.
5. Procedure: should the above-mentioned situations take place, please send the
damaged rods in time to our technical department. Our reply shall be given in one
week in compliance with our service commitment and handling standard. Distributor or
Agent must offer written quality problem report issued by end-user for return shipment
of goods.
6. In case other disputes happen, please send the remains of drill rods to our company,
and we both parties shall solve the issue by friendly negotiation.
7. Limitation on Liability. Except as provided for herein, in no event will JSI be liable for 42
any indirect ,incidental, special, consequential, punitive or similar damages including,
but not limited to, lost profits, loss of data or business interruption losses. In no event
will the total, aggregate liability of JSI under the Contract exceed the value of the
Contract under which liability is claimed. The liability limitations shall apply even if JSI
has been notified of the possibility or likelihood of such damages occurring and
regardless of the form of action, whether in contract, negligence, strict liability, tort,
products liability or otherwise. The parties agree that these limits of liability shall
survive and continue in full force and effect despite any termination or expiration of
any Contract. Any action by Purchaser against JSI must be commenced within one
year after the cause of action has accrued. No employee or agent of JSI is authorized
to make any warranty other than that which is specifically set forth herein. The
provisions in any specification, brochure or chart issued by JSI are descriptive and are
not warranties.
ROCK TOOLS
Shank Adaptor
Shank Adapter
Code Instruction ○○○○○○○○○○○○○○○○○○○○○44
43 Shank Adaptor ○○○○○○○○○○○○○○○○○○45/52
Shank Adaptor ○○○○○○○○○○○○○○○○○○○○○53
ROCK TOOLS
SHANK ADAPTOR
Code Instruction
SKT45-600-HL600
44
ROCK TOOLS
SHANK ADAPTOR
Shank Adaptor
SANDVIK TAMROCK
45
ROCK TOOLS
SHANK ADAPTOR
Shank Adaptor
Rock drill or Drifter Sandvik Part No. Length mm Diameter mm Thread
SANDVIK TAMROCK
SHANK ADAPTOR
Shank Adaptor
ATLAS COPCO
47
ROCK TOOLS
SHANK ADAPTOR
Shank Adaptor
Rock drill or Drifter Sandvik Part No. Length mm Diameter mm Thread
ATLAS COPCO
48
ROCK TOOLS
SHANK ADAPTOR
Shank Adaptor
FURUKAWA
SHANK ADAPTOR
Shank Adaptor
Rock drill or Drifter Sandvik Part No. Length mm Diameter mm Thread
FURUKAWA
50
ROCK TOOLS
SHANK ADAPTOR
Shank Adaptor
INGERSOLL-RAND
51
ROCK TOOLS
SHANK ADAPTOR
Shank Adaptor
Rock drill or Drifter Sandvik Part No. Length mm Diameter mm Thread
BOART LONGYEAR
MONTABERT
TOYO
MITSUI
52
ROCK TOOLS
In order to make customers familiar with our warranty and claim settlement, we
indicate the conditions and procedures in details as below.
1. Full compensation for the following situation:
Fracture in the middle of shank adaptor when life time of the shank adaptor is less
than 1/3 of the average life time of JSI shank adaptors delivered to the same user
under the same working condition.
2. Partial compensation shall be made in accordance with wear rate of thread of
shank adaptor when fracture at bottom of thread, except for the reasons such as rod
punch bit, drilling string and hole are not in a straight line, bit hang up in the hole.
3. Impact face of shank adaptor is chipped, forward for analysis. If the related piston
is chipped too and the order of failure between shank adaptor and piston can not be
measured, we do not offer compensation.
4. Fracture at bottom of splines, forward for analysis. If deformation and adhesion
appear at both ends of the splines, we do not offer compensation.
5. Fracture in the middle of thread, forward for analysis. If adhesion, laceration and
blacken appear at the fracture, we do not offer compensation as the fracture is
caused by lack of lubrication.
6. Should the same problem occur for initial shank adaptors out of any bulk order
when user starts using the shank adaptors (i.e. first three pieces of shank adaptors
prematurely damaged in the same way), please contact us or your suppliers
immediately and stop using the remaining products, we will provide timely service
and settlement (such as replacing the shank adaptors). Otherwise, we will not bear
the responsibility.
7. Procedure: should the above-mentioned situations take place, please send the
damaged shank adaptors in time to our technical department. Our reply shall be
given in one week in compliance with our service commitment and handling standard.
Distributor or Agent must offer written quality problem report issued by end-user for
return shipment of goods.
8. In case other disputes happen, please send the remains of the shank adaptors to
our company, and we both parties shall solve the issue by friendly negotiation.
53 9. Limitation on Liability. Except as provided for herein, in no event will JSI be liable
for any indirect ,incidental, special, consequential, punitive or similar damages
including, but not limited to, lost profits, loss of data or business interruption losses.
In no event will the total, aggregate liability of JSI under the Contract exceed the
value of the Contract under which liability is claimed. The liability limitations shall
apply even if JSI has been notified of the possibility or likelihood of such damages
occurring and regardless of the form of action, whether in contract, negligence, strict
liability, tort, products liability or otherwise. The parties agree that these limits of
liability shall survive and continue in full force and effect despite any termination or
expiration of any Contract. Any action by Purchaser against JSI must be commenced
within one year after the cause of action has accrued. No employee or agent of JSI is
authorized to make any warranty other than that which is specifically set forth herein.
The provisions in any specification, brochure or chart issued by JSI are descriptive
and are not warranties.
ROCK TOOLS
Coupling Sieeve
Coupling Sieeve
Code Instruction ○ ○ ○ ○ ○○○○○○○○○○○○○○○○○ 55
54
Coupling Sleeve ○ ○ ○ ○ ○○○○○○○○○○○○○○○○○55
COUPLING SLEEVE
Coupling Sleeve
C5517-R32/R38
Coupling Sleeve
coupling sleeve
Diameter Length
Description Thread Part No. Weight(kg)
mm in mm in
3 57
R32/R25 45 1 /4" 170 6 /64" CS4517-R32/R25 1
3
R32/R28 45 1 /4" 170 6 57/64" CS4517-R32/R28 0.95
5 1
R38/R32 55 2 /32" 180 7 /8" CS5518-R38/R32 1.85
55
5
T38/R32 55 2 /32" 180 7 1/8" CS5518-T38/R32 2
5 33
T38/R38 55 2 /32" 190 7 /64" CS5519-T38/R38 1.85
5 57
R38 55 2 /32" 170 6 /64" CS5517-R38 1.7
5 33
T38 55 2 /32" 190 7 /64" CS5519-T38 1.95
15 17
T45 63 2 /32" 210 8 /64" CS6321-T45 3.1
19
T45 66 2 /32" 210 8 17/64" CS6621-T45 3.5
7 1
T51 72 2 /8" 235 9 /4" CS7123-T51 5.2
1
T51 76 3" 235 9 /4" CS7623-T51 5.7
ROCK TOOLS
Coupling Sieeve
March 8, 2011
In order to make customers familiar with our warranty and claim settlement, we
indicate the conditions and procedures in details as below.
1. Full compensation for the following situation:
a. Metallographic analysis report shows breakage of coupling sleeve is caused
by heat treatment defects or materials defects.
b. Coupling sleeve split, except for the reason such as coupling is not turned
firmly and shank or rod thread end is not aligned inside coupling.
2. Fracture in the middle of thread, forward for analysis. If adhesion, laceration
and blacken appear at the fracture, we do not offer compensation as the
fracture is caused by lack of lubrication.
3. Should the same problem occur for initial coupling sleeve out of any bulk
order when user starts using the coupling sleeve (i.e. first three pieces of
coupling sleeve prematurely damaged in the same way), please contact us or
your suppliers immediately and stop using the remaining products, we will
provide timely service and settlement (such as replacing the coupling sleeve).
Otherwise, we will not bear the responsibility.
4. Procedure: should the above-mentioned situations take place, please send
the damaged coupling sleeves in time to our technical department. Our reply
shall be given in one week in compliance with our service commitment and
handling standard. Distributor or Agent must offer written quality problem report
issued by end-user for return shipment of goods.
5. In case other disputes happen, please send the remains of the coupling
sleeves to our company, and we both parties shall solve the issue by friendly
negotiation.
6. Limitation on Liability. Except as provided for herein, in no event will JSI be
liable for any indirect ,incidental, special, consequential, punitive or similar
damages including, but not limited to, lost profits, loss of data or business
interruption losses. In no event will the total, aggregate liability of JSI under the 56
Contract exceed the value of the Contract under which liability is claimed. The
liability limitations shall apply even if JSI has been notified of the possibility or
likelihood of such damages occurring and regardless of the form of action,
whether in contract, negligence, strict liability, tort, products liability or
otherwise. The parties agree that these limits of liability shall survive and
continue in full force and effect despite any termination or expiration of any
Contract. Any action by Purchaser against JSI must be commenced within one
year after the cause of action has accrued. No employee or agent of JSI is
authorized to make any warranty other than that which is specifically set forth
herein. The provisions in any specification, brochure or chart issued by JSI are
descriptive and are not warranties.