Documente Academic
Documente Profesional
Documente Cultură
Higher performance
• The TS2 memory allows you to manage up to 250k cards. • The memory is fully configurable enabling it to be used in a
The factory default setting is to manage 100k cards way that best meets the project needs: eg in a large facility
complete with personnel names, 100k transaction buffer it will be configured to accept the maximum number of
and 10k event buffer. cardholders.
• The new TS2 supports up to 16 doors with a reader on
Number of cards Transaction buffer Event buffer each side of the door.
100,000 100,000 10,000 • With on-board 100MB Ethernet connection the new TS2
is able to maximise the usage of the network capacity,
making the firmware and data download faster.
• All Temaline ‘TemaKey’ devices are supported by TS2.
More secure
Communication with the supervisory level can be set as coming from the right and certified source. It also encrypts the
IPSEC (Internet Protocol Security). This ensures the origin card numbers to avoid any ‘capturing’ from sniffer devices –
of data authentication, data integrity, data confidentiality making security system breaches from external devices
(encryption) and replay protection – ensuring total security of virtually impossible.
the communications.
With the possibility to be configured in a redundant
The communication with field devices includes command architecture, the TS2 can guarantee full availability of your
authentication to ensure that commands sent to outputs are security system 24/7.
More flexible
TS2 supports Access Control, T&A and Lift Management
in one application allowing you to optimise the use and the
distribution of your devices.
Easier to use Technical Features
An intuitive Web interface makes the Different operator profiles enable the • Microprocessor Freescale
TS2 available via any Web browser. correct operability for the operator Coldfire MCF5471, 32bits with
This makes it easy to configure, and a ‘user wizard’ makes field Linux O.S.
download the latest firmware or device commissioning very easy and • 128 MB of high performance
carry out any maintenance activity. minimises errors. DDR SRAM
• 64MB of FLASH memory
• Management of up to 16 doors
with readers on both sides of
the door
• Management of up to 64 I/O
• Autonomous clock/calendar with
geographic time zone support
and daylight saving time. Ten
days of autonomy in case of
power failure
• Battery backup, with full
functionality for 90 minutes
in case of power failure and
signalling of the battery-charge
status
• Low voltage power-supply
(12V DC/AC) for safety during
maintenance
• Tamper protection of the unit to
detect unauthorised opening
• Watchdog protection
for recovering in case of
malfunctions
Key Features
Real time clock Internal RTC; retention time 10 days using super capacitor
Technical
Power Consumption 400mA (nominal), 600mA max. (during battery recharge time)
Interface 10/100 BaseT standard unshielded cable on RJ45 - Auto-MDIX: automatically detects and
corrects for straight or cross-over cables
Protection Rating IP55
EN60950, EN50130-4,
EN55022-B, EN55024, EN50133
Recognition class: 2, 3
Certification
Access class: B
Environment Class: II
RoHS / WEEE compliant device
Directives 2001/95/EC, 2011/65/EU
NOTE: Honeywell reserves the right, without notification, to make changes in product design or specifications.