Documente Academic
Documente Profesional
Documente Cultură
Non-Newtonian-Fluid
10
Viscosity (poise)
0.1
0.1 1 10 100 1000
Shear Rate (sec -1)
O adición de aditivos
Encima del CMC
Molécula Surfactante
Cabeza hidrofílica
Static settling test showing that EFAS have superior suspending properties than other Fracturing
fluids even though its viscosity is slightly lower.
EFAS: Environmentally Friendly Anionic Surfactant
10000
N'=0.2
N'=0.4
Friction Pressure,PSI
N'=0.6
N'=0.8
1000
ZONA IDEAL
Baja Fricción
&
100
1.0000 Buena Suspensión
0.1000 0.0100 0.0010 0.0001
K'
70
Water
60
2% EFAS
Pressure drop(psi)
50 3% EFAS
4% EFAS
40
30
20
10
0
0 5 10 15 20 25 30 35
Comparing A & B vs. C & D shows that EFAS gel See the shear thinning property of EFAS gel,
produce 50 % less friction than water and increasing the rate slightly affect friction
comparing E vs. F shows that EFAS produce pressures, on the other hand with water,
pumping rates 60% higher than water for friction pressures increase drastically.
equivalent pressure (5000 PSI).
Jornadas de Producción 2008 – Comodoro Rivadavia
Requerimiento de Viscosidad para
Fracturar con Viscoelástico
100 - 200 cps @ 40 sec-1 , debido al bajo n’ y al
alto k’, mientras que el requerimiento para
otros fluidos es de 400 a 800 cps.
• Maximizar la conductividad de la
fractura.
Longitud efectiva de
fractura
• 12 - 15 % KH2PO4 + 4% - 7% KOH
– Desde pH 6.5 a 9.0 – pH 8.5 higher > buena viscosidad
• Fosfonato Potásico Mono-Básico
• 17 – 19 % K2HPO4
– pH 8.2 a 8.7 – pH 8.5 higher > Buena viscosidad
• Fosfonato Potásico Di-Basico, también funciona en
rango de pH 6.5 a 9 en combinación con KOH
Preguntas?
Dario Hideg
Project Engineer Sr.
Agosto 21, 2008 – Comodoro Rivadavia
Patagonia Argentina
Jornadas de Producción 2008 – Comodoro Rivadavia