Documente Academic
Documente Profesional
Documente Cultură
M. F. O. Barreto
matheusfob@yahoo.com.br
Universidade Federal de Minas Gerais
RESUMO
5251
21º CBECIMAT - Congresso Brasileiro de Engenharia e Ciência dos Materiais
09 a 13 de Novembro de 2014, Cuiabá, MT, Brasil
1 INTRODUÇÃO
5252
21º CBECIMAT - Congresso Brasileiro de Engenharia e Ciência dos Materiais
09 a 13 de Novembro de 2014, Cuiabá, MT, Brasil
Figura 1 – Corte em seção transversal de vergalhão com tratamento térmico superficial [5].
εc = εf = εm (A)
5253
21º CBECIMAT - Congresso Brasileiro de Engenharia e Ciência dos Materiais
09 a 13 de Novembro de 2014, Cuiabá, MT, Brasil
Ec = Ef Vf + Em Vm (B)
onde;
E = módulo de elasticidade longitudinal,
V = fração volumétrica,
c, f e m indicam respectivamente compósito, fibras e matriz.
Gx ≠ Vf Gf + Vm Gm (D)
onde;
G = trabalho de fratura,
V = fração volumétrica,
f e m indicam respectivamente fibras e matriz.
4 MATERIAIS E MÉTODOS
5254
21º CBECIMAT - Congresso Brasileiro de Engenharia e Ciência dos Materiais
09 a 13 de Novembro de 2014, Cuiabá, MT, Brasil
a) b)
5 RESULTADOS
5255
21º CBECIMAT - Congresso Brasileiro de Engenharia e Ciência dos Materiais
09 a 13 de Novembro de 2014, Cuiabá, MT, Brasil
Tensão x Deformação
900
800 20 mm
Tensão real (MPa)
700 17 mm
600
16 mm
500
14 mm
400
300 12 mm
200 10 mm
100 8 mm
0
0 0,005 0,01 0,015 0,02 0,025 0,03 0,035 0,04 0,045
Deformação real (mm/mm)
5256
21º CBECIMAT - Congresso Brasileiro de Engenharia e Ciência dos Materiais
09 a 13 de Novembro de 2014, Cuiabá, MT, Brasil
Tensão x Deformação
900
y = 5585x + 622.57 20 mm
800
Tensão real (MPa)
700 17 mm
600
y = 3882.3x + 596.58
500
400
300
200 Ø20mm Ø17mm
100
0
0.000 0.005 0.010 0.015 0.020 0.025 0.030 0.035 0.040 0.045
Deformação real (mm/mm)
Tensão x Deformação 20 mm
17 mm
Camada Z
900
yz = 7206.5x + 626.32
800
Tensão real (MPa)
700
600
y17 = 3882.3x + 596.58 y20 = 5585x + 622.57
500
400
300 Camada Z
200
100
0
0.000 0.005 0.010 0.015 0.020 0.025 0.030 0.035 0.040 0.045
Deformação real (mm/mm)
5257
21º CBECIMAT - Congresso Brasileiro de Engenharia e Ciência dos Materiais
09 a 13 de Novembro de 2014, Cuiabá, MT, Brasil
5. Conclusão
6. Referências Bibliográficas
[1] SIMON, P.; ECONOMOPOULOS, M.; NILLES, P. Tempcore: A New Process for
the Production of High-Quality Reinforcing Bars. Iron and Steel Engineering, mar.
1984. p. 53-57
[3] RODRIGUES, Paulo César de Matos, CETLIN, Paulo Roberto, SILVA, Adriano de
Paula e, AGUILAR, Maria Tereza Paulino. Perfil de Temperatura em Aço para
Construção Civil Fabricado pelo Processo Tempcore. Revista Metalurgia & Materiais
– ABM, v. 49. n. 418. Artigo. jun. 1993.
[6] FERRANTE, Maurizio. Seleção de Materiais. 1ª ed. São Carlos: UFSCar. 1996,
326p. ISBN 85-85173-12-2
5258
21º CBECIMAT - Congresso Brasileiro de Engenharia e Ciência dos Materiais
09 a 13 de Novembro de 2014, Cuiabá, MT, Brasil
For construction, the detailed study of building materials is of paramount importance in order
to ensure the quality and structural integrity of buildings. In this sense this paper aims at
evaluating the experimental mechanical behavior under tensile, rebar AC-50 steel self-
tempering, both as to its complete section through collapsed sections machining become an
important tool to become familiarized with the behavior one of the most important, most used
and most demanded materials in buildings. For this purpose several commercial gauges for
rebar that were machined to remove the outer layers of self-annealed and evaluated the
mechanical tensile commercial gauge and gauge machined in various diameters behavior were
tested. The results from the survey show that the evaluation of mechanical metal for
construction materials behavior becomes important as the heat treatment by self-tempering
directly influences the mechanical characteristics of the rebar providing increased hardness
and tensile strength and less deformation of the outer layers of rebar. This knowledge
becomes important in the process of cutting and welding mainly in rebar fabricated by self-
tempering process.
5259