Sunteți pe pagina 1din 3

Chemrite – AG 300 Page 33 of 3

Chemrite AG - 300
High Range Superplasticizer for Free Flowing, Self Compacting Concrete (SCC)
_______________________________________________________________________________
Product Description Chemrite AG – 300 is a third generation superplasticizer for
free flowing concrete which is particularly suitable for self
compacting concrete. This product is suitable for tropical and hot
climatic conditions.
_______________________________________________________________________________
Uses Chemrite AG – 300 is used as a superplasticizer in concrete
works such as
-- Slabs and Foundations
-- Walls, Columns and Piers
-- Thin structural elements with densely packed
reinforcement.
-- Hot-weather concreting.
-- High strength concrete
-- Pre-cast concrete
-- Pre stressed concrete
-- Bridges, Roads & Pavements
-- High - rise Buildings
-- Long haul transportation of ready-mixed concrete.
_______________________________________________________________________________
Characteristic Chemrite AG – 300 combines different modes of action.
Advantages By adsorption on the surface of the fines, which keeps them
apart while hydration is in progress, the following concrete
properties are achieved:
-- Improved workability at reduced water content.
-- Pronounced self compacting behaviour, therefore suitable
for the production of self compacting concrete (S.C.C.)
-- High impermeability and strengths due to greater water
reduction.
-- Reduced shrinkage and creep
-- Upto 35% water reduction resulting in higher ultimate
strength.
-- Improved shrinkage and creep characteristics.
_______________________________________________________________________________
Tests Chemrite AG – 300 complies with the requirements for
concrete admixtures ASTM C 1017
_______________________________________________________________________________
Chemrite – AG 300 Page 34 of 3

_______________________________________________________________________________
Product Data
_______________________________________________________________________________
Form Whitish pale liquid.
_______________________________________________________________________________
Packaging 200 Lit drums. Bulk supply in tanker possible on demand
_______________________________________________________________________________

Storage
_______________________________________________________________________________
Shelf life 12 months from date of production if stored properly in
undamaged and unopened original sealed containers.
_______________________________________________________________________________
Storage In dry conditions at temperatures between +5°C and +30°C.
Protect from direct sunlight and frost.
_______________________________________________________________________________

Technical Data
_______________________________________________________________________________
Chemical Base Based on carboxylic acid derivatives
_______________________________________________________________________________
Density (25°C) Approximately 1.06 ± 0.01 Kg/Lit
_______________________________________________________________________________
Chloride Content Nil
_______________________________________________________________________________
Consumption / Dosage Recommended dosage for fluid concrete and S.C.C.: 0.3 - 1.5 %
by weight of cement. It is advisable to carry out trial mixes to
establish the correct dosage.
_______________________________________________________________________________
Compatibility Chemrite AG – 300 may be combined with many other products
particularly
-- Chemplast WP-1
-- Chemrite Ferrogard 110
-- Silica Fume
-- Sulphate - resistant cement.
-- Slag cement.
Trials must be performed before combining products in a
concrete mix.
_______________________________________________________________________________
Chemrite – AG 300 Page 35 of 3

_______________________________________________________________________________
Application Instructions
_______________________________________________________________________________
Dispensing Chemrite AG – 300 is added to the gauging water or
simultaneously as it is poured into the concrete mixer. For
optimum utilization of the high water-reduction property,
thorough mixing at a minimal wet mixing time of 60 seconds is
recommended.
_______________________________________________________________________________
Application Method The standard rules of good concreting practice are to be
followed. Fresh concrete must be cured properly, especially at
high temperatures in order to prevent plastic and drying
shrinkage. Preferably use Chemcure curing agents.
_______________________________________________________________________________
Cleaning of Tools Clean all tools and application equipment with water
immediately after use.
_______________________________________________________________________________

Health & Safety


_______________________________________________________________________________
Protective Measures To avoid allergic reactions, wear protective gloves. In case of
contact with eyes, rinse immediately with clean water and seek
medical attention.
_______________________________________________________________________________
Toxicity Non-toxic & non hazardous.
_______________________________________________________________________________

S-ar putea să vă placă și