Documente Academic
Documente Profesional
Documente Cultură
Hugo2
USB USB COAX1 COAX2 Coax 2 Select Bluetooth Input continuing. decrease play/charge
Source Select Source Select (Blue) and pair with length. Chargers
device using To activate, press and below 1 amp will fail to
Optical OPT BT Mute Mute (Pairing code: 0000) hold the Crossfeed charge Hugo 2.
Source Select (X-PHD) button when
turning the unit on. WARNING!
Bluetooth Crossfeed: If the batteries
Vol +
Source Select Gives a more-speaker- To deactivate, switch are fully
Volume Control like presentation with the unit off and confirm depleted the unit will
Crossfeed three-stage DSP that the volume has not switch on. Please
Vol - spatial effect reduced using the connect to a charger
Select
colour chart supplied and wait 30mins
Filter Select within this manual
Digital To Analogue
FILT X-PHD DIM
08
Light Dim
Specifications
Hugo 2’s IR sensor is located within the viewing Requires Frequency response: 20Hz – 20kHz +/- 0.2dB
Converter and
Headphone
glass, for optimal performance please do not 2x AAA
obstruct this area. batteries Total Harmonic Distortion: <0.0001% 1kHz 3V
RMS 300 ohms
Amplifier
THD and noise at 3V RMS Ref 5.3V: 120dB @
06 Care instructions
1kHz 300 ohms A Wt
3 Made in England
YRS
FILTER
FILTER
FILTER 03
Bluetooth 6.35mm 3.5mm Right / Left 3.5mm Optical
BLUETOOTH MED
1/4”
Headphone
1/8”
Headphone
RCA analogue Digi coax
24-BIT/
24-BIT/
192kHz 03
output output 384kHz x2 16fs = Warm
***
0% - 2% 2% - 20% 20% - 50% 50% - 80% 80% - 100% Coax 1 configuration = Tip and sleeve, Coax 2 configuration = Ring and sleeve. The 3.5mm digital
coaxial jack input supports ‘dual data mode’, where 768kHz files can be input as two separate FILTER
FILTER 04 COAX DUAL MAX
384kHz data streams, should devices support this capability.
04
02 Sample rate indicator - how to read sample rate
DATA MODE
(automatic - not user
selectable) ***
16fs+ HF roll-off = Warmer
with high-frequency
roll-off