Documente Academic
Documente Profesional
Documente Cultură
TYPICAL APPLICATIONS
110 W
3 NCP1117 2 110 W
Input 3 NCP1117 2 Output Input 3 2 Output
NCP1117 XT285 18 to 27
XTXX XTA 10 + + 22
110 W
10 + + 10 10 + + 10 Lines
mF 1 mF
mF 1 mF mF 1 mF
4.75 V +
to 110 W
5.25 V
MAXIMUM RATINGS
Rating Symbol Value Unit
Input Voltage (Note 1) Vin 20 V
www.onsemi.com
2
NCP1117, NCV1117
ELECTRICAL CHARACTERISTICS
(Cin = 10 mF, Cout = 10 mF, for typical value TA = 25°C, for min and max values TA is the operating ambient temperature range that applies
unless otherwise noted.) (Note 4)
Characteristic Symbol Min Typ Max Unit
Reference Voltage, Adjustable Output Devices Vref V
(Vin–Vout = 2.0 V, Iout = 10 mA, TA = 25°C) 1.238 1.25 1.262
(Vin–Vout = 1.4 V to 10 V, Iout = 10 mA to 800 mA) (Note 4) 1.225 − 1.270
www.onsemi.com
3
NCP1117, NCV1117
www.onsemi.com
4
NCP1117, NCV1117
2.0 2.0
TJ = 25°C
1.8
1.5
1.6
1.0
1.4
0.5
1.2
Vin = 5.0 V
Load pulsed at 1.0% duty cycle Load pulsed at 1.0% duty cycle
0 1.0
0 2 4 6 8 10 12 14 16 18 20 −50 −25 0 25 50 75 100 125 150
Vin − Vout, VOLTAGE DIFFERENTIAL (V) TA, AMBIENT TEMPERATURE (°C)
Figure 6. Output Short Circuit Current Figure 7. Output Short Circuit Current
vs. Differential Voltage vs. Temperature
IQ, QUIESCENT CURRENT CHANGE (%)
100 10
Iadj, ADJUST PIN CURRENT (mA)
5.0
80
0
60
−5.0
40
−10
20
Iout = 10 mA −15
0 −20
−50 −25 0 25 50 75 100 125 150 −50 −25 0 25 50 75 100 125 150
TA, AMBIENT TEMPERATURE (°C) TA, AMBIENT TEMPERATURE (°C)
www.onsemi.com
5
NCP1117, NCV1117
100 100
Vripple v 3.0 VP−P Vripple v 0.5 VP−P
fripple = 120 Hz
60 60
fripple = 20 kHz
Vout = 5.0 V
Vripple v 0.5 VP−P
Vin − Vout = 3.0 V
40 40 Iout = 0.5 A Vin − Vout w Vdropout
Vout = 5.0 V
Cout = 10 mF
Vin − Vout = 3.0 V
Cadj = 25 mF, f > 60 Hz
Cout = 10 mF
20 20 Cadj = 200 mF, f v 60 Hz
Cadj = 25 mF
TA = 25°C
TA = 25°C
0 0
0 200 400 600 800 1000 10 100 1.0 k 10 k 100 k
Iout, OUTPUT CURRENT (mA) fripple, RIPPLE FREQUENCY (Hz)
Figure 10. NCP1117XTA Ripple Rejection Figure 11. NCP1117XTA Ripple Rejection
vs. Output Current vs. Frequency
Region of Instability
1 0.1
Region of Instability
0.1 0.01
0.001 0.01 0.1 1 10 0 100 200 300 400 500 600 700 800 900 1000
350E−9
1A Cin = 10 mF Tantalum
300E−9 Cout = 10 mF Tantalum
0.5 A Vin − Vout = 3.0 V
250E−9
V/sqrt (Hz)
200E−9
0.1 A
150E−9
100E−9
50E−9
0
10 100 1.0 k 10 k 100 k
FREQUENCY (Hz)
www.onsemi.com
6
NCP1117, NCV1117
OUTPUT VOLTAGE
DEVIATION (V)
VOLTAGE (V) Cin = 1.0 mF
Cout = 10 mF 0.1
INPUT
Iout = 0.1 A
5.25 0
TA = 25°C
4.25 −0.1 Cin = 10 mF
Cout = 10 mF
Vin = 4.5 V
OUTPUT VOLTAGE
DEVIATION (mV)
LOAD CURRENT
Preload = 0.1 A
CHANGE (A)
20
TA = 25°C
0 0.5
−20 0
OUTPUT VOLTAGE
DEVIATION (V)
Cin = 1.0 mF
VOLTAGE (V)
Cout = 10 mF 0.1
INPUT
Iout = 0.1 A
7.5 0
TA = 25°C
6.5 −0.1 Cin = 10 mF
Cout = 10 mF
Vin = 6.5 V
OUTPUT VOLTAGE
LOAD CURRENT
DEVIATION (mV)
Preload = 0.1 A
CHANGE (A)
20 TA = 25°C
0 0.5
−20 0
Cin = 1.0 mF
VOLTAGE (V)
Cout = 10 mF 0.1
INPUT
Iout = 0.1 A
14.5 0
TA = 25°C
13.5 −0.1 Cin = 10 mF
Cout = 10 mF
Vin = 13.5 V
OUTPUT VOLTAGE
LOAD CURRENT
DEVIATION (mV)
Preload = 0.1 A
CHANGE (A)
20
TA = 25°C
0 0.5
−20 0
www.onsemi.com
7
NCP1117, NCV1117
ÎÎÎ
2.0 oz. Copper
Minimum L
ÎÎÎ
120 1.0
Size Pad
ÎÎÎ
L
100 0.8
80 0.6
RqJA
60 0.4
0 5.0 10 15 20 25 30
L, LENGTH OF COPPER (mm)
90 1.4
80
Minimum
ÎÎÎÎ
2.0 oz. Copper
ÎÎÎÎ
L 1.2
ÎÎÎÎ
70 Size Pad 1.0
L
60
50
ÎÎÎÎ 0.8
0.6
RqJA
40 0.4
0 5.0 10 15 20 25 30
L, LENGTH OF COPPER (mm)
www.onsemi.com
8
NCP1117, NCV1117
APPLICATIONS INFORMATION
www.onsemi.com
9
NCP1117, NCV1117
Protection Diodes The second condition is that the ground end of R2 should be
The NCP1117 family has two internal low impedance connected directly to the load. This allows true Kelvin
diode paths that normally do not require protection when sensing where the regulator compensates for the voltage
used in the typical regulator applications. The first path drop caused by wiring resistance RW −.
connects between Vout and Vin, and it can withstand a peak
surge current of about 15 A. Normal cycling of Vin cannot Input 3 NCP1117 2 RW+ Output
generate a current surge of this magnitude. Only when Vin XTA
+ Remote
is shorted or crowbarred to ground and Cout is greater than + Cout
1 R1 Load
50 mF, it becomes possible for device damage to occur. Cin
R2
Under these conditions, diode D1 is required to protect the
device. The second path connects between Cadj and Vout, and
it can withstand a peak surge current of about 150 mA.
Protection diode D2 is required if the output is shorted or
RW−
crowbarred to ground and Cadj is greater than 1.0 mF.
Figure 26. Load Sensing
D1
www.onsemi.com
10
NCP1117, NCV1117
Figure 27. Constant Current Regulator Figure 28. Slow Turn−On Regulator
Input Output
3 NCP1117 2
XTA
10 + + 10
R1
mF 1 mF
Input Output
3 NCP1117 2
XTA
10 + + 10 R2
120
mF 1 mF
2N2222
Output Control 1.0 k 360
2N2222
On
Off 1.0 k
Output Voltage Control
Figure 29. Regulator with Shutdown Figure 30. Digitally Controlled Regulator
Input Output
3 NCP1117 2
XT50
10 + + 10
mF 1 mF
50 W
Input 3 NCP1117 2 Output
RCHG 5.3 V AC Line 5.0 V to
XT50 12 V
5.0 V Battery 10 + + 10
3 NCP1117 2 mF 1 mF
XT50
+ 10 + + 10
6.6 V mF 1 2.0 k mF
−
Figure 31. Battery Backed−Up Power Supply Figure 32. Adjusting Output of Fixed
Voltage Regulators
www.onsemi.com
11
NCP1117, NCV1117
ORDERING INFORMATION
Device Nominal Output Voltage Package Shipping†
NCP1117STAT3G Adjustable SOT−223 4000 / Tape & Reel
(Pb−Free)
NCV1117STAT3G* Adjustable SOT−223 4000 / Tape & Reel
(Pb−Free)
NCP1117ST15T3G 1.5 SOT−223 4000 / Tape & Reel
(Pb−Free)
NCV1117ST15T3G* 1.5 SOT−223 4000 / Tape & Reel
(Pb−Free)
NCP1117ST18T3G 1.8 SOT−223 4000 / Tape & Reel
(Pb−Free)
NCV1117ST18T3G* 1.8 SOT−223 4000 / Tape & Reel
(Pb−Free)
NCP1117ST20T3G 2.0 SOT−223 4000 / Tape & Reel
(Pb−Free)
NCV1117ST20T3G* 2.0 SOT−223 4000 / Tape & Reel
(Pb−Free)
NCP1117ST25T3G 2.5 SOT−223 4000 / Tape & Reel
(Pb−Free)
NCV1117ST25T3G* 2.5 SOT−223 4000 / Tape & Reel
(Pb−Free)
NCP1117ST285T3G 2.85 SOT−223 4000 / Tape & Reel
(Pb−Free)
NCP1117ST33T3G 3.3 SOT−223 4000 / Tape & Reel
(Pb−Free)
NCV1117ST33T3G* 3.3 SOT−223 4000 / Tape & Reel
(Pb−Free)
NCP1117ST50T3G 5.0 SOT−223 4000 / Tape & Reel
(Pb−Free)
NCV1117ST50T3G* 5.0 SOT−223 4000 / Tape & Reel
(Pb−Free)
NCP1117ST12T3G 12 SOT−223 4000 / Tape & Reel
(Pb−Free)
NCV1117ST12T3G* 12 SOT−223 4000 / Tape & Reel
(Pb−Free)
NCP1117DTAG Adjustable DPAK 75 Units / Rail
(Pb−Free)
NCP1117DTARKG Adjustable DPAK 2500 / Tape & Reel
(Pb−Free)
NCV1117DTARKG* Adjustable DPAK 2500 / Tape & Reel
(Pb−Free)
NCP1117DTAT5G Adjustable DPAK 2500 / Tape & Reel
(Pb−Free)
NCP1117DT15G 1.5 DPAK 75 Units / Rail
(Pb−Free)
NCP1117DT15RKG 1.5 DPAK 2500 / Tape & Reel
(Pb−Free)
NCV1117DT15RKG* 1.5 DPAK 2500 / Tape & Reel
(Pb−Free)
NCP1117DT18G 1.8 DPAK 75 Units / Rail
(Pb−Free)
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
*NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified and
PPAP Capable
www.onsemi.com
12
NCP1117, NCV1117
www.onsemi.com
13
NCP1117, NCV1117
SOT−223
ST SUFFIX
CASE 318H
1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3
Adjustable 1.5 V 1.8 V 1.9 V 2.0 V 2.5 V
1 2 3 1 2 3 1 2 3 1 2 3
DPAK
DT SUFFIX
CASE 369C
2 2 2 2 2 2
1 3 1 3 1 3 1 3 1 3 1 3
Adjustable 1.5 V 1.8 V 1.9 V 2.0 V 2.5 V
2 2 2 2
1 3 1 3 1 3 1 3
2.85 V 3.3 V 5.0 V 12 V
A = Assembly Location
L = Wafer Lot
Y = Year
WW, W = Work Week
G or G = Pb−Free Package
(Note: Microdot may be in either location)
www.onsemi.com
14
NCP1117, NCV1117
SOT−223
ST SUFFIX
CASE 318H
1 2 3 1 2 3 1 2 3 1 2 3
Adjustable 1.5 V 1.8 V 2.0 V
1 2 3 1 2 3 1 2 3 1 2 3
DPAK
DT SUFFIX
CASE 369C
2 2 2 2
1 3 1 3 1 3 1 3
Adjustable 1.5 V 1.8 V 2.0 V
2 2 2
1 3 1 3 1 3
2.5 V 3.3 V 5.0 V
A = Assembly Location
L = Wafer Lot
Y = Year
WW, W = Work Week
G or G = Pb−Free Package
(Note: Microdot may be in either location)
www.onsemi.com
15
NCP1117, NCV1117
PACKAGE DIMENSIONS
SOT−223
ST SUFFIX
CASE 318H
ISSUE O
0.08 NOTES:
E 1. DIMENSIONS ARE IN MILLIMETERS.
2. INTERPRET DIMENSIONS AND TOLERANCES
H 0.2 M C B S C PER ASME Y14.5M, 1994.
3. DIMENSION E1 DOES NOT INCLUDE INTERLEAD
S
FLASH OR PROTRUSION. INTERLEAD FLASH OR
B
B PROTRUSION SHALL NOT EXCEED 0.23 PER
3 SIDE.
S
4. DIMENSIONS b AND b2 DO NOT INCLUDE
A e
C A
DAMBAR PROTRUSION. ALLOWABLE DAMBAR
PROTRUSION SHALL BE 0.08 TOTAL IN EXCESS
D
e1
b
2 OF THE b AND b2 DIMENSIONS AT MAXIMUM
MATERIAL CONDITION.
M
A 5. TERMINAL NUMBERS ARE SHOWN FOR
0.1
4
REFERENCE ONLY.
B 1 6. DIMENSIONS D AND E1 ARE TO BE DETERMINED
AT DATUM PLANE H.
b2 A1
E1 MILLIMETERS
0.1 M C A S B S A B A DIM MIN MAX
A --- 1.80
A1 0.02 0.11
ÉÉÉÉÉÉÉ ÉÉÉ
b 0.60 0.88
(b2) (b) b1 0.60 0.80
b2 2.90 3.10
ÉÉÉÉÉÉÉ
ÇÇÇÇÇÇÇ ÉÉÉ
ÇÇÇ
b3 2.90 3.05
c 0.24 0.35
ÉÉÉÉÉÉÉ T
ÉÉÉ
c1 c c1 0.24 0.30
D 6.30 6.70
b1 E 6.70 7.30
b3 E1 3.30 3.70
e 2.30
SECTION B−B L SECTION A−A e1 4.60
L 0.25 ---
T 0_ 10_
SOLDERING FOOTPRINT*
3.8
0.15
2.0
0.079
6.3
2.3 2.3
0.248
0.091 0.091
2.0
0.079
0.059
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
www.onsemi.com
16
NCP1117, NCV1117
PACKAGE DIMENSIONS
L4 INCHES MILLIMETERS
NOTE 7
DIM MIN MAX MIN MAX
b2 c BOTTOM VIEW A 0.086 0.094 2.18 2.38
e SIDE VIEW A1 0.000 0.005 0.00 0.13
b b 0.025 0.035 0.63 0.89
0.005 (0.13) M C b2 0.028 0.045 0.72 1.14
TOP VIEW b3 0.180 0.215 4.57 5.46
c 0.018 0.024 0.46 0.61
c2 0.018 0.024 0.46 0.61
H Z Z D 0.235 0.245 5.97 6.22
E 0.250 0.265 6.35 6.73
e 0.090 BSC 2.29 BSC
GAUGE SEATING
L2 PLANE C PLANE
H 0.370 0.410 9.40 10.41
L 0.055 0.070 1.40 1.78
L1 0.114 REF 2.90 REF
L2 0.020 BSC 0.51 BSC
L BOTTOM VIEW L3 0.035 0.050 0.89 1.27
A1 L4 −−− 0.040 −−− 1.01
L1 ALTERNATE
Z 0.155 −−− 3.93 −−−
CONSTRUCTIONS
DETAIL A
ROTATED 905 CW
SOLDERING FOOTPRINT*
6.20 3.00
0.244 0.118
2.58
0.102
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
◊ www.onsemi.com NCP1117/D
17