Documente Academic
Documente Profesional
Documente Cultură
5 Conductivity Instrumentation A company is only as strong as its people. We could not have grown for
40 years without the dedication of our highly skilled employees.
6 Dissolved Oxygen 16 Glossary
Hanna dedicates itself to be a worldwide leader in quality, value,
7 Multiparameter 17 Technical Tables service and selection. We can assure you that these principles will be
evident throughout your Hanna experience.
8 Magnetic Stirrers 18 Alphanumeric
On behalf of Hanna worldwide, thank you for your continued and
Index
9 Chemical Test loyal support.
Martino Nardo
President, Hanna Instruments
INSTRUMENTS •
40
NNA 40 t
HA h
•
AN
978
NIV
RY • SINCE 1
ERSA
RY • SINCE 1
ERSA
YEARS
NIV
978
AN
HA
NNA 40 th
INSTRUMENTS •
INSTRUMENTS •
40
NNA 40 t
HA h
AN
978
NIV
RY • SINCE 1
ERSA
RY • SINCE 1
ERSA
YEARS
NIV
978
AN
•
HA
NNA 40 th
INSTRUMENTS •
Introduction
About Hanna����������������������������� ii
Production Overview���������������������������������������������ii
about Hanna
History and Philosophy����������������������������������������iii
360º Value����������������������������������������������������������������� iv
Hanna Milestones................................................. xii
New Products������������������������ xx
www.hannainst.com | i
Production Overview
Introduction
about Hanna
ii | www.hannainst.com
History and Philosophy
History
In 1978 Hanna Instruments was founded in Limena, Italy by Oscar
and Anna Nardo. Since that time, Hanna Instruments has grown
to be a worldwide leader in the development of electro-analytical
instrumentation. The development of novel instrumentation for
customers that would not have normally used instrumentation is what
has led to the success of the company.
Introduction
In the 80’s the company had a mission to provide a pH meter that was
affordable, accurate and easy to use. The result was the pHep (pH
electronic paper). This meter used an integrated circuit to measure
the voltage response of a pH electrode packaged into a pocket-sized
meter. The calibration of the meter was performed manually and
the price was less than $50.00. Having a simple operation and very
affordable price point brought the advantages of an electro-analytical
measurement of pH to the masses. Whether it be a farmer looking to
measure the pH of soil to the printing press operator that needs to
measure the pH of a fountain solution. Hanna Instruments provided
the user with an accurate electronic alternative to litmus paper and
chemical indicators.
about Hanna
0.5” thick. edge uses digital sensors with a 3.5mm connector and to for flexibility to produce short runs of products. Meaning that if the
change from one parameter to the next all the user has to do is unplug market demand for a particular product is very limited we will still
and plug in a different sensor. Also in 2014, the HALO® pH electrode produce it because we know that there is a customer that requires a
was released. This electrode is the first Bluetooth pH/temperature unique solution and not a general one size fits all type of product.
electrode. The HALO transmitted measurement data wirelessly to
an ipad that was running the Hanna Lab App. In 2015, edge blu was
released and it brought the Bluetooth connectivity to a pH meter. Now Philosophy
the HALO can be used with a tablet style computer or a traditional pH
meter. The HALO line of pH electrodes continues to be expanded to The philosophy of the Nardo family has always been to supply
accommodate the diversity of applications. These Bluetooth enabled customers around the world with practical, cost-effective solutions
sensors are setting a new standard and it is safe to say that they will for their testing needs.
become commonplace in the future.
When Hanna introduced the pHep®pH (pH Electronic Paper) tester
Being a leader in innovation is only part of our story. We are not in 1986 it revolutionized the world of testing. Millions of people from
only an instrumentation designer but also a vertically integrated various industries were now capable of testing pH simply, accurately
manufacturer. From an original idea for a product to the finished good and affordably. This is the basis for the winning philosophy strongly
we are in control of the entire process. We employ our own engineers embedded in Hanna. When Hanna introduced the world’s first single
that design the circuits and program the firmware for the meters. We parameter series of automatic titrators dedicated to food analysis
use surface mounted technology machines (SMT) to populate the in 2005, thousands of users from around the world were put in the
circuit boards, injection molding machines to make the meter cases position to improve the quality of their product by performing their
and other plastics, chemical manufacturing for solutions and reagents, own in-house analytical tests.
glass blowers for the manufacture of pH and ORP electrodes, and
even the printing of the packaging materials. Everything is done in- The driving philosophy that has been a Hanna trademark for over three
house. This ensures a high quality product while reducing the cost decades has enabled the company to provide the right instrumentation
by not outsourcing to third parties. Even more importantly, it allows to their customers with world class service and support.
www.hannainst.com | iii
360º Value
Introduction
about Hanna
Offering research grade quality at competitive prices, every Hanna Local Support
office strives to work with each customer to develop a solution tailored
After you have made your investment, you should never feel uncertain
to their needs, on their budget.
about the support or technical service you will receive. Hanna
develops relationships with its customers built on quality products
Hanna 360° Value with personal service and support.
When you buy a Hanna product, you’re not only buying the best
value for your money, but you’re also receiving the benefit of Hanna’s 24/7 Access
unsurpassed customer service and post-sale technical support.
Visit us on the web at www.Hannainst.com. There you can search for
products, look up local office contacts, read the latest news from
Quality Certification
Our products are designed and manufactured under strict ISO
9001:2008 standards. Every instrument undergoes stringent quality All Hanna products are in compliance with CE directives and our
control tests at different stages of manufacturing including 100% production facilities are ISO 9001:2008 certified. Hanna and download
quality control checks just prior to shipment. instruction manuals, MSDS and brochures.
iv | www.hannainst.com
360º Value
Introduction
Casing, injection, and
rubber molding
Hanna designs and manufactures all of our instrument casings,
about Hanna
custom cases and inserts, solution and reagent bottles and
rubberized shockproof boots.
www.hannainst.com | v
360º Value
Introduction
Electronics
Our electronics department mounts and connects the
electronic components onto our custom circuit boards. The
boards are then tested and installed into our instruments.
about Hanna
vi | www.hannainst.com
360º Value
Introduction
Glass Blowing
Our glass blowing department combines artistry and science
to create our electrodes. Glass is heated and shaped within
about Hanna
strict tolerances by hand in both of our facilities in Nusfalau,
Romania and Rhode Island, USA.
Electrode assembly
Our glass blowing, injection molding and electronics
department work together to supply our electrode assembly
department with the materials they need to build Hanna
electrodes.
www.hannainst.com | vii
360º Value
Introduction
viii | www.hannainst.com
360º Value
Introduction
Solutions
Our solutions are formulated and
mixed on premises and are prepared
to precise formulas and standardized
about Hanna
with a pH electrode and meter
calibrated to NIST standards.
Reagents
Powder and liquid reagents are
carefully formulated and filled to
ensure maximum precision.
www.hannainst.com | ix
360º Value
Introduction
Packaging
Hanna produces the packaging for
all product lines. Each package is
carefully designed for safety and
about Hanna
x | www.hannainst.com
360º Value
Introduction
Assembly
Our assembly department finalizes
the production of the instrument by
putting all the components together
about Hanna
to form a working instrument. This
includes LCD’s, probes, buttons
Quality control
After continuous validation and testing, Hanna products
undergo a final quality check before they are packaged and
released to consumers.
www.hannainst.com | xi
Hanna Milestones
For 40 years, Hanna has prided itself in being a world leader in innovation
World’s first single-probe portable
of analytical instrumentation. Headed by our team at the home office,
Hanna’s research and development department constantly challenge
conductivity meter
themselves to invent new testing techniques and to advance existing The HI8033 is a four pole conductivity portable meter. Having a four
technology. The minds at Hanna work to achieve the common goal pole design allowed the meter to measure a variety of different
of simplifying analytical testing through improving instrumentation, solutions with different conductivity values. The same meter can be
sensor development, reagents and chemicals. used to measure both deionized water and fertilizer solution.
Introduction
1978
Hanna Opens in Italy
Hanna was founded in Limena, Italy. Limena is a province of Padua
(AKA Padova) and is located in Northern Italy. It is approximately 40
km west of Venice. Padua is well known for the University of Padua.
Many great scholars of our time have spent time at the university. Most
notable scholars include Galileo Galilei and Nicolaus Copernicus.
1982
World’s first pH controlled chemical
dosing pump
The DP7916 combined a pH meter with a chemical dosing pump in
order to maintain a desired set point of a process applications. The
BL7916 is the second-generation design and is still widely used by
many customers including plating, wastewater treatment, water
treatment and swimming pools.
about Hanna
1984
World’s first microprocessor-based
hand held pH meter
The HI8424 was the first portable microprocessor pH meter. The
microprocessor allowed for automatic calibration as compared to
manual calibration with trimmers or potentiometers. The calibration
information was stored in the meter even when it was powered off.
1985
World’s first pH electrode with
built-in temperature sensor
The HI8414 pH meter was the first meter to use a pH electrode
(HI1213S) with a built in temperature sensor. The temperature sensor
allowed for the automatic correction for changes in pH with changes in
temperature as calculated by the Nernst equation. This advancement
is now commonplace in the industry.
xii | www.hannainst.com
Hanna Milestones
1991
World’s first replaceable electrode
pH pocket tester
The Checker® 1 (HI98103) was the first pocket pH meter that had
a replaceable electrode. The HI1270 pH electrode has a screw cap
threaded end that was simple to replace extending the list of the pH
Introduction
meter. The Checker is by far the most popular and recognizable tester
in the market with over 1 million meters used. The Checker is still in
production and continues to be one of the most popular meters.
1992
about Hanna
The 1910 and 1912 were the first pH electrodes to have a built in The Checktemp series of pocket thermometers were the first
amplifier within the probe. The pH electrode produces a high impedance thermometers that incorporated a unique calibration check feature
signal. Due to the low current signal the measurement is susceptible for determining any drift of the internal electronics. A switch is used
to electrical noise, humidity, and a bad connection. Utilizing an to place the thermometer in CAL Check mode. If the reading was inside
amplifier allowed for signal with a higher current, which overcame the
±0.3°C from 0.0°C reference point that is simulated then the internal
measurement issues. We continue to use amplifiers in many electrodes
electronics are within an acceptable tolerance.
including some of those with built in temperature sensors.
1990 1997
www.hannainst.com | xiii
Hanna Milestones
1999 2002
World’s first pH/temperature tester World’s first colorimeter with
with dual-level LCD CAL Check™ feature
The pHep®4 and 5 were the second generation of the original pHep. The HI95 series of portable photometers were the second generation
These meters used a large dual-level LCD that allowed many advance of our single parameter photometers. The HI93 series first generation
features that would only be found on more expensive portable and meters used an LED at a specific wavelength as a light source. The
benchtop instrumentation. The Dual level LCD was able to display HI95 series optical system was improved to use a tungsten lamp
Introduction
both pH and Temperature simultaneously along with a battery and and narrow band interference filter for a much narrower spectral
stability indicators. The meters also feature automatic temperature bandwidth. Hanna Instruments also incorporated a unique CAL Check
compensation, automatic calibration, battery percent level at start up, function in which a traceable secondary standard is used to check the
waterproof, and a replaceable electrode. pHep 4 and 5 set the standard pre-programmed curve. If readings are outside a specified tolerance
for all instrumentation manufacturers that offer handheld testers. then the unit could be calibrated with the standards and an offset to
the curve applied.
2003
World’s first pH meter with
CAL Check
Many problems in pH measurement
result from a lack of understanding
of the Nernstian response for a
pH electrode. Every pH electrode
generates a mV response in solutions
at a specific pH. By monitoring the offset
and slope characteristics of
a pH electrode during the
calibration process it is possible
to determine potential problems
about Hanna
2000 2004
World’s first multiparameter World’s first process pH meter with
(pH/conductivity/ temperature) integrated cellular communication
pocket tester The ability for remote data acquisition is becoming of increasing
importance. Many times it is convenient to monitor a process
The Combo pH/EC/TDS/Temperature meters were the first testers to parameter remotely. With the HI504900 GSM module it is possible
combine pH and conductivity sensors into a single meter. They offered to use a SIM card from cellular provider to transmit measurement
all the featues of the redesigned pHep handheld testers with the data over a cellular connection. The HI504 process pH/mV controller
addition of a graphite amperometric sensor for the measurement of EC allows for the digital transmission of data by using an RS485 serial
and TDS. The Combo meters also had a exposed temperature sensor connection. The HI504 allows for programming responses based on
that allowed for a quick and accurate temperature compensation for measurement criteria. These responses include the use of sending a
both pH and conductivity measurements. text (SMS) messages over the cellular connection.
xiv | www.hannainst.com
Hanna Milestones
2004
World’s first pH/ORP combo tester
The measurement of pH and ORP is very common for industries that
rely upon oxidizers for sanitization or to promote an oxidation reaction
such as with the oxidation of cyanide to cyanate for the treatment of
plating wastewater. Both pH and ORP measurements are also made 2013
for chemical reactions that use a reducing agent. The ORP generated
by oxidizers and reductants are dependent on the pH of the solution. World’s most innovative pH,
Introduction
Many times there is enough oxidizer or reductant present but the
pH is not at the optimum. With the HI98121 it is possible to monitor
EC and DO handheld/portable/
both pH and ORP at the same time. The HI98121 is commonly used to wall-mount meter...edge®
monitor pH and chlorine for many applications including swimming,
food sanitization, plating wastewater treatment, and cooling tower edge is the thinnest multiparameter meter available. At just 0.5” thick
water treatment. the edge is loaded with many of the features found in expensive
benchtop instrumentation. Features include data logging, USB ports,
CAL Check™, auto ranging EC /TDS ranges, and GLP data review. edge
uses digital pH, ORP, EC and DO probes with a small 3.5 mm connector.
2005 The edge is extremely versatile in that it can be used as a portable,
World’s first single parameter line of benchtop or even as a wall mount indicator.
about Hanna
for sending samples to a lab.
pH probe with a built-in temperature sensor that can
be used virtually anywhere: in the field, laboratory
or classroom. HALO transmits measurement data
2010 wirelessly to a compatible smart phone or tablet
World’s first handheld colorimeters running the Hanna Lab App. Since the introduction
of HALO in 2014 the family has grown to include other specialized
(Checker®HC) to offer ease of use and electrodes including the FC2022 pH electrode for the measurement of
pH in food products. Halo has set the new standard in technology for pH
high accuracy in a palm sized design measurement that will be commonplace in the future.
www.hannainst.com | xv
Hanna Instruments® World Headquarters
xvi | www.hannainst.com
Hanna Instruments® Offices Worldwide
Introduction
Hanna Instruments Australia CHILE
18 Fiveways Boulevard
ECUADOR
Hanna Instruments Equipos Ltda.
Keysborough Victoria 3173 HANNA Instruments Ecuador S.A.
Lo Echevers 311, Quilicura
P: 03 9769 0666 Inglaterra N31-126 y Mariana de Jesús,
F: 03 9769 0699 Santiago
P: (56 2) 28625700 Sector la Mariscal, Quito
E: sales@hannainst.com.au
E: ventas@hannachile.com P. (593-2) 601 6989 / 352 0335 / 353 0464
W: www.hannainst.com.au
W: www.hannachile.com F. (593-2) 601 6989
E: hannaecuador@hannainst.ec
AUSTRIA
W: www.hannainst.ec
Hanna Instruments Österreich GmbH
CHINA
Rosenkranzgasse 6, 8020 Graz, Austria Hanna World Instruments (Beijing) Co.,Ltd FRANCE
P: +43 (0) 316 72 00 29 Room 911,Building C,Webok Time Center,
E: info@hannainstruments.at Yard No.17 Zhongguancun South St., Hanna Instruments France
W: www.hannainstruments.at Haidian Dist., Beijing 100081 1 rue du Tanin
P: (8610)8857 0068/8857 0069 Parc des Tanneries
BANGLADESH F: (8610)8857 0060 67380 LINGOLSHEIM
E: china@hannainst.cn P: (0)3 33 76 91 88
Hanna Instruments Bangladesh
W: www.hannainst.cn F: (0)3 33 76 58 80
Road# 2, Block# L, House# 14/A,
Banani, Dhaka, Bangladesh E: info@hannainstruments.fr
P: +88 02 9852557 COLOMBIA W: www.hannainstruments.fr
F: +88 02 9872152
Hanna Instruments Colombia
W: www.hannainst.com.bd GERMANY
Carrera 98 N° 25G - 10, Bodega 9, Fontibón
Bogotá Hanna Instruments Deutschland GmbH
BELGIUM
contacts
P: (57 1) 5189995 An der alten Ziegelei 7
Hanna Instruments BVBA E: ventas@hannacolombia.com D-89269 Vöhringen
Winninglaan 8, 9140 Temse W: www.hannacolombia.com P: +49 7306 3579100
P: +32 3 710 93 40 F: +49 7306 3579101
F: +32 3 710 93 59
COSTA RICA E: info@hannainst.de
E: info@hannainstruments.be
W: www.hannainst.de
W: www.hannainstruments.be La Uruca, del Taller 3R 200m al Oeste y 75m
al Norte, local mano izquierda, color verde
BOLIVIA musgo y portón negro. GREECE
San José
Hanna Instruments Bolivia Hanna Instruments Hellas Ltd.
Av. Banzer Km 6 1/2, Edificio Arysta P: 00 (506) 2296 5368
Marni 10, 10433 Athens
Santa Cruz F: 00 (506) 2296 5368
P: 210 8235192
P: (591 3) 3116969 E: hannacostarica@hannainst.cr
F: 210 8840210
E: ventas@hannabolivia.bo W: www.hannainst.cr
E: hannainfo@hannagreece.gr
W: www.hannabolivia.bo
W: www.hannagreece.gr
CROATIA
BRAZIL
HANNA instruments Brasil importação e
Hanna Instruments d.o.o GUATEMALA
Jure Kaštelana 19, 10 000
exportação LTDA. Zagreb 7 calle 3-24 Zona 18 Ofiespacio 101
Alameda Juari, 539, Tamboré Barueri - Interbodegas, Guatemala Guatemala
P: 00385 (0)1 2446 721
SP06460–090
00385 (0)1 2446 550 P: 00 (502) 2316 7574, 2316 7592
P. 55 (11) 20765080
F. 55 (11) 20765080 F: 00385 (0)1 2446 721 F: 00 (502) 2369 5499
E: vendas@hannainst.com.br E: sales@hannainst.hr E: hannaguatemala@hannainst.com.gt
W: www.hannainst.com.br W: www.hannainst.hr W: www.hannainst.com.gt
www.hannainst.com | xvii
Hanna Instruments® Offices Worldwide
W: www.hanna-polska.com
INDIA MALAYSIA
Hanna Equipments (India) Pvt. Ltd. Hanna Instruments (M) SDN. BHD (Co. 173054-W) PORTUGAL
3,4,5,6 First floor, Aum Sai Building, No. 11A, Jalan PJS 11/20, Bandar Sunway
Hanna Instruments Portugal LDA.
Plot 23C, Sector - 7, Kharghar, 46150 Petaling Jaya, Selangor
Zona Industrial de Amorim
Navi Mumbai - 410 210 P: (603) 5638 9940
Rua Manuel Dias, Fracção I nº 392
P: 22 2774 6554 F: (603) 5638 9829
4495-129 Amorim - Póvoa de Varzim
F: 22 2774 6557 E: sales@hannamalaysia.com
P: +351 252 248 670
E: sales@hannainst.in W: www.hannamalaysia.com
F: +351 252 248 679
W: www.hannainst.in E: info@hannacom.pt
MEXICO
W: www.hannacom.pt
INDONESIA Hannapro S.A. de C.V.
Vainilla 462, Col. Granjas, México, D.F.
PT. Hanna Instruments Indotama ROMANIA
CP 08400
Perkantoran Plaza Pasifik,
P: 01 (55) 5649 1185 Hanna Instruments Romania SRL
Jl. Raya Barat Boulevard Blok A4 no 86
F: 01 (55) 5649 1186 Str Heltai Gaspar, nr 9A, Cluj Napoca,
Kelapa Gading Permai - Jakarta Ultara 14240
P:62-021 45842941 / 4525106 E: hannapro@prodigy.net.mx Cluj, 400427
F: 62-021 45842942 W: www.hannainst.com.mx P: +40 264 599 459
E: hannainstruments.indotama@gmail.com F: +40 264 598 740
E: info@hannainst.ro
MOROCCO
ITALY W: www.hannainst.ro
Hanna Instruments Morocco S.a.r.l.
Hanna Instruments Italia Srl
Km 3.5 Route National
Viale delle Industrie, 11 SERBIA
10 Boutsara Bensergao
35010 Villafranca Padovana Hanna Instruments d.o.o
Agadir
contacts
P: 049.9070367
P: 00212 (0) 5 28 28 35 35 /30 Palmotićeva 20a, Beograd, Srbija
F: 049.9070488
F: 00212 (0) 5 28 28 32 31 P: +381 (0)11 3244 201
E: padova@hanna.it
E: info@hannamaroc.com F: +381 (0)11 3242 922
W: www.hanna.it
W: www.hannamaroc.com E: info@hannainstruments.rs
W: www.hannainstruments.rs
JAPAN
THE NETHERLANDS
Hanna Instruments Japan Corporation
Hanna Instruments BV
SINGAPORE
NTT Makuhari Bldg. 14F-EN, 1-6 Nakase
Mihama-Ku, Chiba 261-0023 Betuwehaven 6 Hanna Instruments (S) Pte. Ltd
P: 81-43-216-2601 3433 PV Nieuwegein, 161, Kallang Way #07-12/14, 349247
F: 81-43-216-2602 P: +31 (0)30-289 68 42 P: (65)6296-7118
E: sales@hanna.co.jp F: +31 (0)30-267 14 27 F: (65)6291-6906
W: www.hanna.co.jp E: info@hannainstruments.nl E: sales@hannasingapore.com
W: www.hannainstruments.nl W: www.hannasingapore.com
KOREA
PANAMA SLOVENIA
Hanna Instruments Korea
Hanna instruments Panama S.A
134 Hyundae Tresbien Ciudad de Panamá, Vía Ricardo J. Alfaro y Hanna Service doo
Donhwamun-ro 11ga-gil, Avenida Juan Pablo II Srmin 75H Bertoki
Jongno-gu, Seoul Edificio siglo XXI, tercer piso local 56 “frente 6000 - Koper
P: (82)02-743-5147 antiguo depósito” P: 00386 (0) 59029902/3
P: (507) 2363012 / 2367818 / 2606769
F: (82)02-743-1896 F: 00386(0) 59029898
F: (507) 2363012
E: mccoyhan@naver.com E: hannapanama@hannainst.com.pa E: sales@hannaservice.eu
W: www.hannainst.co.kr W: www.hannainst.com.pa W: www.hannaservice.si
xviii | www.hannainst.com
Hanna Instruments® Offices Worldwide
Introduction
SPAIN
UNITED KINGDOM
Hanna Instruments S.L.
Polígono Industrial Azitain, Parcela 3D, Hanna Instruments Ltd
20600 Eibar, Guipúzcoa Eden Way, Pages Industrial Park
Leighton Buzzard, Bedfordshire LU7 4AD
P: 902 420 100 / 943 820 100
P: 01525 850855
F: 902 420 101
F: 01525 853668
E: info@hanna.es
E: sales@hannainstruments.co.uk
W: www.hanna.es
W: www.hannainst.co.uk
contacts
P: +41 41 925 66 46 Pham Ngu Lao Wrd, District I
E: info@hannainst.ch Hochiminh City
W: www.hannainst.ch P: 84-8-39260457/58/59
F: 84-8-39260461
E: sales.hcm@hannavietnam.com
TAIWAN W: www.hannavietnam.com
Hanna Instruments Taiwan Ltd.
3F., No.56, Ln. 188, Ruiguang Rd.,
Neihu Dist., Taipei City 114, Taiwan
P: +886 2 8797 2918
F: +886 2 8797 2731
E: Jacky@hannainst.com.tw
W: www.hannainst.com.tw
THAILAND
Hanna Instruments Thailand Ltd
410/67-68 Soi Ratchadapisek 24,
Ratchadapisek Road, Samsen Nork,
Huay Kwang, Bangkok 10310
P: 0-2541-4199
F: 0-2541-4198
E: sales@hannathai.com
W: www.hannathai.com
www.hannainst.com | xix
xx
new products Introduction
| www.hannainst.com
Introduction
new products
Hanna Instruments GroLine products are designed
with the hydroponics grower in mind.
HI981420
www.hannainst.com | xxi
Wireless pH Meters
Introduction
new products
xxii | www.hannainst.com
Introduction
HI13302 HI10832 FC2142
new products
See page 2.19
HI12922 HI14142
www.hannainst.com | xxiii
Foodcare Thermometers
Professional, rugged, and waterproof thermometers
designed to be used on a daily basis in industrial kitchens
and catering as well as warehouses, loading docks and
transportation vehicles.
xxiv | www.hannainst.com
Introduction
HI93501 HI935001 HI935007
new products
See page 14.29
HI935004
T-Type HI935008
Thermocouple T-Type
Thermometer Thermocouple
• Interchangeable T-type Thermometer
thermocouple probe
• Fixed T-type thermocouple probe
HI935004 is a thermometer that
HI935008 is a thermometer
that includes a T-type thermocouple
that incorporates a fixed T-type
stainless steel replaceable style
thermocouple stainless steel
penetration probe (FC767PW). This
penetration probe to provide the
thermometer offers temperature
greatest accuracy. This thermometer
measurement from -50 to 300°C
offers temperature measurement
(-58.0 to 572°F).
from -50 to 300°C (-58.0 to 572°F).
www.hannainst.com | xxv
Groline Sachets
we have expanded our Groline sachet offerings to
include pH 4, pH 7, pH 10, 5000 µS/cm, 1.41 mS/cm,
cleaning and storage.
Introduction
new products
xxvi | www.hannainst.com
Table of Contents 1
table of contents
Product Spotlights�����������������������������������������������1.4
Comparison Guide������������������������������������������������1.6
Testers������������������������������������� 1.8
Multiparameter�����������������������������������������������������1.8
pH/ORP������������������������������������������������������������������� 1.12
Salt Content��������������������������������������������������������� 1.21
Conductivity/TDS���������������������������������������������� 1.22
Water Purity��������������������������������������������������������� 1.27
Temperature��������������������������������������������������������1.28
Monitors��������������������������������1.35
Multiparameter�������������������������������������������������� 1.35
pH������������������������������������������������������������������������������1.42
Conductivity/TDS���������������������������������������������� 1.45
Temperature��������������������������������������������������������1.49
Replacement
Electrodes���������������������������� 1.51
www.hannainst.com | 1.1
1 Introduction
Hanna provides high accuracy in a single parameter tester for pH, EC,
TDS, temperature and more. Multiparameter testers are also available,
eliminating the hassle of carrying multiple testers.
Hanna testers have easy to read LCDs and durable outer casings. They
are able to measure in places with a high percentage of humidity, and
low power demand allows a long battery life, eliminating the need for
Testers and Monitors
pH Testers
All Hanna pH testers come with a replaceable pH probe, which is a
unique advantage over most pH testers found on the market today.
Clogged electrode junctions are a problem of the past with extendable
cloth junctions. When the cloth is dirty from routine testing, readings
can become slow and unstable. This can be fixed by simply pulling out 3
mm of cloth, and cutting off the dirty junction.
Conductivity Testers
Conductivity (EC) testers are widely used for monitoring EC/TDS with
water conditioning, reverse osmosis, cooling towers, drinking water,
wastewater, laboratories, agriculture, aquaculture and aquariums,
hydroponics and the printing industry.
1.2 | www.hannainst.com
Introduction 1
Each monitor is designed for specific application requirements such as Temperature monitors come with Hanna’s exclusive CAL Check™
in hydroponics, greenhouses, horticulture, water treatment and food feature. With CAL Check, users can ensure the accuracy of the meter
preparation and processing. without the need for external calibration equipment.
At startup, monitors perform a self-check diagnostic to assure proper Food grade stainless steel probes and quick response times assure the
working condition. Stability indicators let the user know when to take safety and preservation of the goods monitored.
readings while the HOLD function freezes readings on the display for
easy and accurate recording. Selected instruments in this line provide
a visual alarm so the user can easily recognize if the monitored solution
is out of specification for the application.
Hanna offers monitors that feature large backlit LCDs for easy visual
reading of multiple parameters as well as automatic calibration, automatic
buffer selection and automatic temperature compensation (ATC).
Hanna’s wall-mounted monitors are very easy to install and work with
a 12V power supply. Many models feature interchangeable probes so
an application specific probe can easily be plugged in to the meter.
All monitors have durable outer casings protecting them from high
humidity environments and rain.
pH Monitors
Ideal for growers, pH monitors are supplied with advanced, non-
clogging double junction pH electrodes that will withstand the most
introduction
aggressive environments. Measurements are highly accurate and can
be verified with one or two-point manual or automatic calibration.
Conductivity Monitors
Conductivity monitors with different measurement ranges are
available with a host of features suited for aggressive environments.
ORP Monitors
Hanna has developed oxidation-reduction (ORP) monitors specially for
swimming pool and spa facilities where monitoring is crucial. Casings
incorporate a large, bright LED indicator that will flash if measurements
fall below the user-selected value.
www.hannainst.com | 1.3
1 Product Spotlights
HI98131
GroLine pH/EC/TDS
Combo Tester
The HI98131 GroLine Combo offers high accuracy pH, EC (conductivity),
Testers and Monitors
pHep pH Testers
The pHep® is used by millions of people around the world to monitor
pH in laboratories and industrial applications as well as in agriculture,
fish farming, food manufacturing and quality control, swimming pools
and the printing industry.
HI98118
GroLine pH Tester
product spotlights
HI98115
GroLine pH Tester
Our HI98115 GroLine pH tester is designed with many advanced
features for growers of all types. This pH tester offers automatic
calibration to one or two points, automatic buffer recognition,
calibrated buffer tags, stability indicator, low battery indicator, and
selectable automatic shut-off. With its compact size, one-button
operation, and ease of calibration, the HI98115 is the optimal tool for
pH measurement in nutrient solutions and soil slurries.
1.4 | www.hannainst.com
Product Spotlights 1
Soil Test
Direct Soil EC and Temperature Meter with Built-in Stainless
Steel EC Probe
HI98318
product spotlights
HI981420
www.hannainst.com | 1.5
1 Comparison Guides
Replaceable Electrode/Probe
Automatic Calibration
Testers and Monitors
pH Calibration Points
0.01 pH Resolution
HOLD Function
pH Buffer Sets
Salinity Range
Waterproof
ORP Range
TDS Range
pH Range
EC Range
Auto-off
BEPS
Page
ATC
Code
Multiparameter
HI98129 • • • °C/°F • • • 2 1 2 • • • • • • • 1.8
pH/ORP
HI98127 • °C/°F • 2 2 • • • • • • • 1.12
HI98111 • • 2 • • 1.13
HI98112 • • 2 • • 1.13
HI98113 • °C • 2 • • 1.13
HI98100 • • 2 • • 1.16
HI98103 • 2 • • 1.16
HI98115 • • 2 • • 1.18
HI98201 • 1.21
EC/TDS
HI98203 • 1 1.21
Primo • • 1 • • 1.26
Primo 5 • • 1 • • 1.26
Primo 4 • • 1 • • 1.26
HI98308 • 1 • 1.27
HI98309 • 1.27
1.6 | www.hannainst.com
Comparison Guides 1
Temperature Range(s)
Automatic Calibration
TDS Temperature
pH Temperature
EC Temperature
HOLD Function
pH Buffer Sets
Battery Power
Compensation
Compensation
Compensation
Visual Alarm
CAL Check™
Waterproof
Backlit LCD
ORP Range
TDS Range
pH Range
EC Range
Auto-off
Page
Code
Temperature
HI98501 °C/°F • • 1.28
HI151-00 °C • • 1.32
HI151-01 °F • • 1.32
HI145-00 °C • • 1.33
HI145-01 °F • • 1.33
HI145-20 °C • • 1.33
HI145-30 °F • • 1.33
HI98517 °C 1.34
Monitors
HI991404 • • • °C/°F 2 2 • • • • • • • • 1.35
comparison guides
HI981420 • • • °C/°F 2 • • • • • • • • • 1.36
HI981404N • • 2 • • 1.41
HI981405N • • 2 • • 1.41
HI981401N • 2 • 1.43
HI981402 • 2 • • 1.44
HI983302N • • • 1.46
HI983307 • • • • 1.47
HI983304 • • • • 1.48
HI146-00 °C • 1.49
HI147-00 °C • 1.50
HI147-01 °F • 1.50
www.hannainst.com | 1.7
HI98129 (Combo) · HI98130 (Combo)
1 pH/EC/TDS Testers
• Waterproof
·· Designed to float if accidentally
dropped in a tank
• Automatic Temperature Compensation
·· All readings are compensated
for variations in temperature
·· Temperature displayed in °C or
°F along with pH reading
Testers and Monitors
• Stability indicator
·· Meter displays a clock tag that
will disappear when the reading
has achieved stability
• HOLD button
·· Freezes reading on the display to
allow recording of measurement
• BEPS (Battery Error Prevention System)
·· Meter will automatically shuts off
if there is not enough power to
get an accurate measurement
• Battery % level at startup
• Low Battery Indicator
• Auto-off
·· Automatically shuts off after 8 minutes
of non-use to maximize battery life
automatically temperature-compensated.
The graphite conductivity probe provides
These testers feature a replaceable pH greater accuracy because it cannot be
electrode cartridge with an extendable contaminated by salt deposits in the solution.
cloth junction,as well as an EC/TDS graphite The exposed temperature sensor provides
electrode. The renewable cloth junction fast response times and guarantees highly
provides an extended electrode life and the accurate temperature compensated readings.
replaceable pH cartridge means that this
tester does not need to be thrown away
when the pH sensor is exhausted.
1.8 | www.hannainst.com
LCD Display Features
1
testers
Range 0 to 2000 mg/L (ppm) 0.00 to 10.00 g/L (ppt)
1.5V (4) / approx. 100 hours of continuous use; Calibrate directly in buffer
Battery Type / Life
auto-off after 8 minutes of non-use
solution sachets
Dimensions / Weight 163 x 40 x 26 mm (6.4 x 1.6 x 1.0’’) / 100 g (3.5 oz.)
An easy calibration can be performed right
Ordering HI98129 (Combo) and HI98130 (Combo) are supplied with HI73127 pH electrode and in our buffer solution sachets for the most
Information HI73128 electrode removal tool, batteries and instructions.
accurate readings.
pH solutions begin on page 2.142; EC and TDS solutions begin on page 5.34;
see pH electrode specifications on page 1.51 www.hannainst.com | 1.9
HI98131
1 GroLine pH/EC/TDS
Combo Tester
• Waterproof
·· Designed to withstand the humidity
of a growing environment
• Automatic one-point calibration
using our Quick Cal solution
• Automatic Temperature Compensation
Testers and Monitors
1.10 | www.hannainst.com
1
Specifications HI98131
Resolution 0.01 pH
Accuracy ±0.1 pH
Temperature
automatic
Compensation
testers
Accuracy ±2% F.S.
EC
automatic, one-point at 1.41 mS/cm or 5.00 mS/cm;
Calibration
one-point calibration using Quick Cal calibration solution
Temperature
automatic, with β = 1.9%/°C
Compensation
pH solutions begin on page 2.142; Quick Cal solutions begin on page 2.149;
EC and TDS solutions begin on page 5.34; see pH electrode specifications on page 1.51 www.hannainst.com | 1.11
HI98127 (pHep®4) · HI98128 (pHep®5)
1 pH and Temperature
Testers
• Waterproof
·· Designed to float if accidentally
dropped in a tank
• Automatic Temperature Compensation
·· All readings are compensated
for variations in temperature
·· Temperature displayed in °C or
Testers and Monitors
Temperature
automatic
Compensation
Additional
1.5V (4) / approx. 300 hours of continuous use; auto-off
Specifications Battery Type / Life
after 8 minutes of non-use
junction. This cartridge design has no pins to Ordering HI98127 (pHep®4) and HI98128 (pHep®5) are supplied with HI73127 pH electrode,
line up or that can break. Information HI73128 electrode removal tool, batteries and instructions.
1.12 | www.hannainst.com pH solutions begin on page 2.142; see pH electrode specifications on page 1.51
HI98111 PICCOLO® · HI98112 PICCOLO® 2
1
HI98113 PICCOLO® plus
Stick pH Tester
• Pre-amplified electrode
• Narrow, replaceable probe
• Easy to hold and operate
testers
HI98111 HI98112 HI98113
Specifications (PICCOLO®) (PICCOLO®2) (PICCOLO® plus)
1.00 to 13.00 pH;
Range 1.00 to 13.00 pH 1.00 to 13.00 pH
0.0 to 70.0°C
Accuracy
±0.01 pH ±0.01 pH ±0.01 pH; ±1°C
(@25°C/77°F)
Temperature
automatic, 0 to 70°C (32 to 158°F)
Compensation
Additional
Battery Type / Life 1.5V (3) / approximately 100 hours of continuous use
Specifications
Environment 0 to 50°C (32 to 122°F); RH max 95%
All PICCOLO® models are supplied complete with pH electrode, pH 4.01 and pH 7.01 buffer solution sachets, calibration screwdriver,
batteries, rugged carrying case and instructions.
Ordering HI98111 (PICCOLO®) is supplied with 90 mm (3.5”) HI1280 amplified pH electrode.
Information
HI98112 (PICCOLO®2) is supplied with 160 mm (6.3”) HI1290 amplified pH electrode.
HI98113 (PICCOLO® plus) is supplied with HI1295 amplified electrode with temperature sensor.
pH and ORP solutions begin on page 2.142; see pH electrode specifications on page 1.52 www.hannainst.com | 1.13
HI98107 pHep® · HI98108 pHep+
1 pHep pH Testers
• Waterproof
• Extractable cloth junction to
extend pH electrode life
• Built in temperature sensor
for Automatic Temperature
Compensated measurements.
• Automatic one or two-point calibration
• Stability indicator
Testers and Monitors
pH Accuracy
±0.1 pH ±0.10 pH
(@25°C/77°F)
Temperature
automatic, 0 to 50°C (32 to 122°F)
Compensation
Battery Type / Life CR2032 3V Li-ion / approximately 800 hours of continuous use
Additional Auto-off 8 minutes, 60 minutes, or can be disabled
Specifications
Environment 0 to 50°C (32 to 122°F); RH 100% max
HI98107 (pHep) is supplied with CR2032 battery, electrode cleaning solution sachet,
pH 4.01 buffer solution sachet, pH 7.01 buffer solution sachet (2), storage/protection
Ordering sleeve, instruction manual and quality certificate.
Watertight seal Information HI98108 (pHep+) is supplied with CR2032 battery, electrode cleaning solution sachet,
An easily removable cover provides access to pH 4.01 buffer solution sachet, pH 7.01 buffer solution sachet (2), storage/protection
sleeve, instruction manual and quality certificate.
the battery compartment.
GroLine pH Tester 1
• Waterproof
• Extractable cloth junction to
extend pH electrode life
• Quick calibration mode using Hanna
Quick Cal pH/EC calibration solution
• Two-button operation
Specifications HI98118
testers
Range 0.00 to 14.00 pH
Resolution 0.01 pH
Accuracy
±0.10 pH
pH (@25°C/77°F)
Temperature
automatic, 0 to 50°C (32 to 122°F)
Compensation
Ordering HI98118 GroLine pH tester, Quick Cal calibration sachets (3), electrode cleaning solution Supplied in a carrying case with
Information sachet, battery, instruction manual and quality certificate. buffer and cleaning solutions.
pH solutions begin on page 2.142; Quick Cal solutions begin on page 2.149 www.hannainst.com | 1.15
HI98100 · HI98103
1 Checker®
pH Testers
The latest HI98103 Checker and HI98100
Checker Plus are the next generation of the
original Hanna Checker pH tester. The Checker
is by far one of the most popular pH meters
in the world with over 1 million meters used
since its introduction in 1991. From students
to researchers, the Checker has been helping
Testers and Monitors
1.16 | www.hannainst.com
calibration tags
1
one or two-point
calibration
large LCD
stability indicator
readout
low battery
indicator
one button
replaceable
probe
testers
HI98100 HI98103
Specifications Checker Plus Checker
Range 0.00 to 14.00 pH 0.0 to 14.0 pH
HI98100 (Checker) and HI98103 (Checker Plus) are supplied with HI1271 pH
Ordering electrode, pH 4.01 buffer solution sachet (2), pH 7.01 buffer solution sachet (2),
Information electrode cleaning solution sachet (2), battery, quality certificate, and instruction Supplied in a carrying case with
manual in a carrying case. buffer and cleaning solutions.
pH solutions begin on page 2.142; see pH electrode specifications on page 1.51 www.hannainst.com | 1.17
HI98115
1 GroLine pH Tester
The HI98115 GroLine pH tester has been
designed with many advanced features for
growers of all types. This pH tester offers
automatic calibration to one or two points,
automatic buffer recognition, calibrated
buffer tags, stability indicator, low battery
indicator, and selectable automatic shut-off.
With its compact size, one-button operation,
and ease of calibration, the HI98115 is the
Testers and Monitors
Enhanced LCD that displays reading, off after 8 minutes or 60 minutes to conserve
stability indicator, low battery indicator and battery life in the event that the meter is left
calibration tags. on. The auto off feature can be disabled.
1.18 | www.hannainst.com
calibration tags
1
one or two-point
calibration
large LCD
stability indicator
readout
low battery
indicator
replaceable
probe
testers
pH calibration can be performed directly in
our solution sachets.
Specifications HI98115
Range 0.00 to 14.00 pH
Resolution 0.01 pH
pH
Accuracy (@25°C/77°F) ±0.2 pH
pH solutions begin on page 2.142; see pH electrode specifications on page 1.51 www.hannainst.com | 1.19
HI98120 · HI98121
Compensation (HI98121)
• HOLD feature
·· HOLD button to freeze
readings on the display
• Battery indicator
·· Battery life indicator at startup
ORP Resolution 1 mV 1 mV
Accuracy ±2 mV ±2 mV
Temperature
— automatic for pH readings
Compensation
Additional
Specifications HI73127 replaceable pH
HI73120 replaceable ORP
Electrodes electrode (included);
electrode (included)
fixed ORP sensor
Exposed temperature sensor Dimensions / Weight 163 x 40 x 26 mm (6.4 x 1.6 x 1.0’’) / 100 g (3.5 oz.)
HI98120 (ORP) is supplied with HI73120 ORP electrode, HI73128 electrode removal
The exposed stainless steel temperature
Ordering tool, batteries and instructions.
sensor facilitates faster and more accurate
Information HI98121 (ORP/pH) is supplied with HI73127 pH electrode, HI73128 electrode removal
temperature measurement. tool, batteries and instructions.
1.20 | www.hannainst.com pH and ORP solutions begin on page 2.142; see pH and ORP electrode specifications on page 1.51
HI98201
ORP Tester 1
• Extractable junction
• 700-Hour battery life
The HI98201 is an ORP tester ideal for use in swimming pools and spas, as it can provide
a valuable indication of water quality. This tester utilizes a platinum electrode and Hanna
unique renewable cloth junction, that can be pulled out when clogging occurs, reactivating the
reference and restoring the electrode.
Oxidation reduction is a process by which a molecule or ion loses or gains electrons. This occurs
most readily in water treatment and in pool and spa maintenance where an oxidizer, such as
Specifications HI98201
Range ±999 mV
ORP Resolution 1 mV
Accuracy (@25°C/77°F) ±5 mV
Battery Type / Life 1.5V (4) / approximately 700 hours of continuous use
Ordering
HI98201 (ORP) is supplied with protective cap, batteries and instructions
Information
HI98203 SALINTEST
testers
one crucial factor remains the same: the necessity for salinity testing. The main component of
salt in seawater is sodium chloride.
The SALINTEST can help you accurately monitor the concentration of sodium chloride in
aquaculture systems. Besides applications in aquaculture, SALINTEST is also ideal for checking
salt concentrations in live fish storage tanks, tropical fish aquariums, refrigerated storage and
oceanographic investigations. The SALINTEST is easy to maintain and to assure accuracy, it has
one-point calibration through a trimmer on the side.
Battery Type / Life 1.5V (4) / approximately 500 hours of continuous use
Additional
Environment 0 to 50°C (32 to 122°F); RH max 95%
Specifications
Dimensions 175 x 41 x 23 mm (6.9 x 1.6 x 0.9’’)
www.hannainst.com | 1.21
HI98311 · HI98312
1 EC/TDS and
Temperature
Testers
• Waterproof
·· Waterproof and designed to float
• ATC
·· Automatic Temperature Compensation
Testers and Monitors
• HOLD feature
·· HOLD button to freeze
readings on the display
• BEPS
·· Alerts the user of low battery power
that could adversely affect readings
1.22 | www.hannainst.com EC and TDS solutions begin on page 5.34; see EC electrode specifications on page 1.51
HI98331 Soil Test™
• One-point calibration
• Automatic calibration to 1413 µS/
cm conductivity standard
• Automatic Temperature
Compensation (ATC)
recommended
immersion level
0 to 4000 µS/cm
Range
testers
0.00 to 4.00 mS/cm (dS/m)
1 µS/cm
Resolution
0.01 mS/cm (dS/m)
EC
±50 µS/cm (0 to 2000 µS/cm)
Accuracy ±300 µS/cm (2000 to 4000 µS/cm)
(@25°C/77°F) ±0.05 mS/cm (0.00 to 2.00 mS/cm)
±0.30 mS/cm (2.00 to 4.00 mS/cm)
Temperature
Automatic, with coefficient (β) fixed @ 2%/°C
Compensation
Battery Type / Life CR2032 Li-ion (included) / approx. 100 hours of continuous use
Additional
Specifications Auto-off 8 minutes, 60 minutes, or can be disabled
Ordering HI98331 (Soil Test) is supplied with HI73331 penetration conductivity probe, calibration
Information screwdriver, batteries and instructions.
Supplied in a carrying case with probe sleeve
1
HI98304
0.00 to
Range — — 0 to 2000 µS/cm
testers
20.00 mS/cm
EC Resolution — — 1 µS/cm 0.01 mS/cm
Accuracy
— — ±2% F.S.
(@25°C/77°F)
Range 0.0 to 50.0°C/32.0 to 122.0°F
Resolution 0.1°C / 0.1°F
Temperature
Accuracy
Exposed temperature sensor (@25°C/77°F)
±0.5°C / ±1.0°F
These testers feature exposed temperature Calibration HI70032: HI70038: HI70031: HI70030:
Solution 1382 ppm 6.44 ppt 1413 mS/cm 12.88 mS/cm
sensors for faster response times.
Calibration automatic, one-point
Temperature
automatic from 0 to 50°C (32 to 122°F)
Additional Compensation
Specifications Battery CR2032 3V Li-ion /
Type / Life approx. 250 hours of continuous use
Environment 0 to 50°C (32 to 122°F); RH 100% max
Dimensions 160 x 40 x 17 mm (6.3 x 1.6 x 0.7’’)
Weight 75 g (2.6 oz.)
HI98301 (DiST 1) is supplied with CR2032 battery, 1382 ppm calibration solution sachet (4),
storage/protection sleeve, instruction manual and quality certificate.
HI98302 (DiST 2) is supplied with CR2032 battery, 6.44 ppt calibration solution sachet (4),
Ordering storage/protection sleeve, instruction manual and quality certificate.
Information HI98303 (DiST 3) is supplied with CR2032 battery, 1413 μS/cm calibration solution sachet (4),
Watertight seal storage/protection sleeve, instruction manual and quality certificate.
An easily removable cover provides access to HI98304 (DiST 4) is supplied with CR2032 battery, 12.88 mS/cm calibration solution sachet
(4), storage/protection sleeve, instruction manual and quality certificate.
the battery compartment.
GroLine EC/TDS 1
Tester
• Waterproof
• Automatic temperature compensation (ATC)
• Automatic one-point EC calibration
• Measurement stability indicator
The GroLine waterproof EC/TDS tester
is ideal for hydroponics, greenhouses, or
Specifications HI98318
testers
Accuracy
±2% F.S.
(@25°C/77°F)
EC/TDS
Calibration automatic, one-point (1.41 mS)
TDS Conversion
0.5 (500 ppm) or 0.7 (700 ppm) Watertight seal
Factor (CF)*
An easily removable cover provides access to
Range 0.0 to 50.0°C/32.0 to 122.0°F
the battery compartment.
Resolution 0.1°C/0.1°F
Temperature
Accuracy
±0.5°C/±1°F
(@25°C/77°F)
Temperature
automatic, 0.0 to 50.0°C (32 to 122°F)
Compensation
Ordering HI98318 GroLine EC/TDS testeris supplied with Quick Cal calibration sachets (4), battery, Supplied in a carrying case with
Information storage cap, instruction manual and quality certificate. calibration solutions.
EC/TDS solutions begin on page 5.34; Quick Cal solutions begin on page 5.40 www.hannainst.com | 1.25
Primo
1 EC/TDS Testers
• Single point automatic calibration
• Automatic temperature compensation (ATC)
Accuracy
±2% F.S. — —
(@25°C/77°F)
Accuracy
— ±2% F.S. ±2% F.S.
(@25°C/77°F)
180 x 50 x 25 mm 180 x 50 x 25 mm 66 x 50 x 25 mm
Dimensions
(7.1 x 2.0 x 1.0’’) (7.1 x 2.0 x 1.0’’) (2.6 x 2.0 x 1.0’’)
Additional
Weight 50 g (1.8 oz.) 50 g (1.8 oz.) 115 g (4.1 oz.)
Specifications
Temperature
automatic from 0 to 60°C (32 to 140°F), β=2%/°C
Compensation
Ordering Primo and Primo 5 are supplied with batteries and instructions.
Information Primo 4 with 1 m (3.3’) cable probe connection are supplied with batteries and instructions.
Water Purity 1
Testers
The HI98308 and HI98309 use a
conductometric measurement to determine
the purity of water.
testers
Specifications HI98308 (PWT) HI98309 (UPW)
Range 0.0 to 99.9 µS/cm 0.000 to 1.999 µS/cm
Ordering HI98308 (PWT) and HI98309 (UPW) are supplied with protective cap, calibration
Information screwdriver (HI98308 only), batteries and instructions.
www.hannainst.com | 1.27
HI98501 Checktemp®
1 Digital
Thermometer
with Stainless Steel Penetration Probe
• Large display
·· The large display features a
wide temperature range and
optimal viewing angle.
• IP65 water resistant protection
Testers and Monitors
• HACCP
·· Use as a tool for control
in HACCP analysis
• AISI 316 stainless steel penetration probe
Select between °C or °F
measurement in one tester
1.28 | www.hannainst.com
1
testers
Easy battery change
Easily replace the battery with a twist-off
cover.
Specifications °C °F
Range -50.0 to 150.0°C -58.0 to 302°F
Battery Type / Life CR2032 Li-ion / approximately 2000 hours of continuous use
www.hannainst.com | 1.29
HI98509 Checktemp®1
1 Digital Thermometer
with Stainless Steel Probe Attached to
a 3.3’ Silicone Cable
• Large display
·· The large display features a wide
temperature range and viewing angle
• IP65 water resistant protection
• Silicone probe cable
·· 3.3’ silicone cable maintains flexibility
and performance in applications where
temperatures are widely variable
• AISI 316 stainless steel penetration probe
Probe stainless steel probe with 1 m (3.3’) silicone cable; 97.3 x dia 3.5 mm (3.8 x dia 0.14’’)
1.30 | www.hannainst.com
HI98539 Checktemp®Dip
Digital Thermometer 1
with Weighted Stainless Steel Probe
Attached to a 9.9’ Silicone Cable
testers
and alerts the user of the calibration status.
simply stand on the edge of the water and dip
the probe in.
www.hannainst.com | 1.31
HI151
1 Folding Pocket
Thermometer
• CAL Check™
·· Alerts users of calibration status
CAL Check
As you unfold the stainless steel probe, the
Checktemp 4 automatically turns on and
immediately performs a calibration test. This
unique Hanna feature, CAL Check, provides
the security of knowing you have accurate
measurements. CAL Check also lets you know
if your battery level is low or if your meter
requires recalibration.
Probe stainless steel probe with penetration tip; 117 x dia 3.5 mm (4.6 x dia 0.14’’)
Battery Type / Life 1.5V AA / approx. 25,000 hours of continuous use; auto-off after 8 minutes of non-use
1.32 | www.hannainst.com
HI145
T-Shaped 1
Thermometer
• CAL Check™
·· Alerts users of calibration status
• HOLD Feature
·· HOLD button to freeze
readings on the display
HI145-00 (°C) — HI145-01 (°F): With an automatic CAL Check feature, the
Stainless steel probe 125 x dia 5 mm HI145 series performs a self-check of its
calibration status and displays it on the LCD.
This feature ensures accuracy, repeatability
and confidence in readings.
0.1°C (-50.0 to 199.9°C); 0.1°F (-58.0 to 199.9°F); 0.1°C (-50.0 to 199.9°C); 0.1°F (-58.0 to 199.9°F);
Resolution
1°C (200 to 220°C) 1°F (200 to 428°F) 1°C (200 to 220°C) 1°F (200 to 428°F)
±0.3°C (-20 to 90°C); ±0.6°F (-4 to 194°F); ±0.3°C (-20 to 90°C) ±0.6°F (-4 to 194°F);
Accuracy
±0.4% F.S. (outside) ±0.4% F.S. (outside) ±0.4% F.S. (outside) ±0.4% F.S. (outside)
Probe stainless steel probe; 125 mm x dia 5 mm (4.9 x dia 0.2’’) stainless steel probe; 300 mm x dia 5 mm (11.8 x dia 0.2’’)
Battery Type / Life 1.5V AAA / approximately 10,000 hours of continuous use; auto-off after 8 minutes of non-use
Environment -10 to 50°C (14 to 122°F); RH max 95% -10 to 50°C (14 to 122°F); RH max 95%
Ordering All models of the HI145 series are supplied complete with battery and instructions.
Information HI145-00 with 125 mm probe, HI145-01 with 125 mm probe, HI145-20 with 300 mm probe; HI145-30 with 300 mm probe
www.hannainst.com | 1.33
HI98517 KEY °C
1 KEY® Pocket
Thermometer
• Ideal for spot measurements
• Four interchangeable stainless
steel probes available
4 probes available:
HI98517-13
penetration/general purpose
Resolution 1°C
surface Response Time approximately 20 seconds in water with HI98517-13 probe (included)
Battery Type / Life 1.5V (4) / approximately 700 hours of continuous use
K-type thermocouple probe for KEY®.
Environment 0 to 50°C (32 to 122°F); RH max 95%
Application: solids, plates, furnaces, molds.
Dimensions (meter only) 175 x 41 x 23 mm (6.2 x 1.4 x 0.8’’)
Ordering
HI98517 (KEY C) is supplied with HI 98517-13 probe, batteries and instructions.
Information
1.34 | www.hannainst.com
HI991404 · HI991405
pH/EC/TDS and 1
Temperature
Monitors
• HOLD button to freeze
readings on the display
• Waterproof
• Automatic temperature compensation (ATC)
monitors
pH: automatic, one or two-point with auto-buffer
pH Calibration
recognition
Dimensions / Weight
160 x 105 x 31 mm (6.2 x 4.1 x 1.2) / 190 g (6.7 oz.)
(meter only)
pH solutions begin on page 2.142; EC and TDS solutions begin on page 5.34;
see pH electrode specifications on page 1.52 www.hannainst.com | 1.35
HI981420
1 GroLine Hydroponics
Monitor
Testers and Monitors
monitors
1.36 | www.hannainst.com
1
Features
• 3 sensors combined in a single • Selectable EC to TDS conversion • Large LCD with plant-friendly
rugged probe body factor: choice of either a 0.5 green backlighting
·· pH electrode with renewable cloth or 0.7 conversion factor • Ambient light sensor for
junction, amperometric EC/TDS sensor, automatic LCD dimming
• Automatic Temperature Compensation
On-Screen Features
monitors
Menu Data Viewing
Easy to navigate menu system to access 30 day and 24 hour summary screens can be viewed in plot or detail views. Real-time data
calibration, GLP, and meter setup. can be viewed in plot view.
www.hannainst.com | 1.37
1
Testers and Monitors
1.38 | www.hannainst.com
1
Specifications HI981420
Range* 0.00 to 14.00 pH; 0.0 to 14.0 pH
Temperature
automatic from 0.0 to 60.0°C (32.0 to 140.0°F)
Compensation
Accuracy ±0.1 mS/cm from 0.00 to 5.00 mS; ±0.2 mS/cm from 5.00 to 10.00 mS/cm)
EC
Calibration one-point at 1.41 mS/cm or 5.00 mS/cm (using auto standard recognition); one-point calibration using quick calibration solution
Temperature
automatic with β set at 1.9%/°C
Compensation
monitors
Resolution 10 ppm (mg/L)
Accuracy ±2%FS
TDS
Calibration via EC calibration
Conversion
0.5 (500 ppm) or 0.7 (700 ppm)
Factor (CF)**
Accuracy ±0.5°C/±1°F
Data logging automatic Logging for 30 days with 15 minute intervals; min/max/average
Data export .CSV format; via USB-C drive or PC using USB-C connection
Additional Display 128 x 64 pixel B/W LCD with green backlight, Automatic backlight dimming using ambient light sensor.
Specifications
Alarms high and low with enable/disable option for all parameters.
Ordering HI981420 is supplied with HI1285-8 multiparameter probe, Quick Cal buffer solution sachets (2), pH electrode cleaning solution sachet
Information for agriculture (2), 12VDC power adapter, quality certificates and instruction manual.
1 pH/TDS and
Temperature
Monitor
• Backlit, graphic LCD display
• Automatic temperature compensation (ATC)
1.40 | www.hannainst.com pH solutions begin on page 2.142; TDS solutions begin on page 5.39;
HI981404N · HI981405N
pH/TDS or 1
pH/EC Continuous
Indicators
• Two parameters with a single instrument
• Advanced electrode technology
• Simple operation and maintenance
• Supplied complete and ready to use
monitors
Resolution 10 mg/L (ppm) —
TDS
Accuracy
±2% F.S. —
(@25°C/77°F)
Temperature Temperature automatic from 5 to 50°C (41 to automatic from 5 to 50°C (41 to
Compensation Compensation 122°F) (TDS only) 122°F) (EC only)
pH solutions begin on page 2.142; EC and TDS solutions begin on page 5.34;
see pH electrode specifications on page 1.52 www.hannainst.com | 1.41
HI991401 (pH Gro’Chek)
1 pH and
Temperature
Monitor
• Automatic Temperature Compensation (ATC)
• HOLD button to freeze
readings on the display
• Waterproof
Testers and Monitors
HI991401-01 (pH Gro’Chek) (115V) and HI991401-02 (pH Gro’Chek) (230V) are
Ordering supplied with HI1293D pH electrode, HI1294 temperature probe (fixed), HI70004
Information pH 4.01 buffer solution sachet, HI70007 pH 7.01 buffer solution sachet, 12 VDC
power adapter and instructions.
1.42 | www.hannainst.com pH solutions begin on page 2.142; see pH electrode specifications on page 1.52
HI981401N (Gro’Chek pH)
pH Monitor 1
• Water resistant housing
·· The meter housing is rated IP54
meaning it has a high level of
protection against particles and a fair
amount of protection against water
• One-point calibration
·· Calibrate to pH 7.01 and pH 4.01
solutions using a screwdriver
monitors
Specifications HI981401N
Range 0.0 to 14.0 pH
Resolution 0.1 pH
Accuracy
±0.2 pH
(@25°C/77°F)
HI981401N-01 (Gro’Chek pH) (115V) and HI981401N-02 (Gro’Chek pH) (230V) are
Ordering supplied with HI1286 pH electrode, HI1283 stainless steel grounding bar, HI70004
Information pH 4.01 buffer solution sachet, HI70007 pH 7.01 buffer solution sachet, calibration
screwdriver, 12 VDC adapter and instructions.
pH solutions begin on page 2.142; see pH electrode specifications on page 1.52 www.hannainst.com | 1.43
HI981402 (Pronto pH)
1 pH Monitor
• Waterproof
• LED indicators
Resolution 0.1 pH
Accuracy
±0.2 pH
(@25°C/77°F)
Alarm red LED (blinks when pH reading differs from the setpoint more than ±0.5 pH)
EC/TDS and 1
Temperature
Monitors
• HOLD button to freeze
readings on the display
• Waterproof
• Backlit, graphic LCD display
monitors
Accuracy ±2% F.S. ±2% F.S.
1 EC Meter
• Water resistant housing
·· The meter housing is rated IP54
meaning it has a high level of
protection against particles and a fair
amount of protection against water
• One-point calibration
·· Calibrate with 1413 µS/cm EC
solutions using a screwdriver
Testers and Monitors
• Automatic Temperature
Compensation (ATC)
·· Samples automatically compensated
for temperature variations
Accuracy
2% F.S.
(@25°C/77°F)
EC Monitor 1
• Automatic Temperature
Compensation (ATC)
• Water-resistant
monitors
Specifications HI983307
Range 0.00 to 9.99 mS/cm
Temperature
automatic, 5 to 50°C (41 to 122°F) with β=2%
Compensation
Ordering HI983307-01 (115V) and HI983307-02 (230V) are supplied with HI7632/2 EC/TDS probe, calibration screwdriver,
Information 12 VDC adapter and instructions.
1 Conductivity Meter
for Demineralized
Water
• Automatic Temperature Compensation (ATC)
• Water-resistant
• Adjustable setpoint
Testers and Monitors
Specifications HI983304
Range 0.00 to 19.99 µS/cm
Accuracy
±2% F. S.
(@25°C/77°F)
Temperature
automatic, 5 to 50°C (41 to 122°F) with β=2.4%/°C
Compensation
red LED blinks when measured value differs from the setpoint
Alarm
more than 1.00 µS/cm
Ordering HI983304-01 (115V) and HI983304-02 (230V) are supplied with HI7631/2 EC/TDS
Information probe, calibration screwdriver, 12 VDC adapter and instructions.
Wall-Mounted 1
Precision
Thermometer
• CAL Check™
·· Alerts users of calibration status
• HACCP
·· Meets HAACP requirements
monitors
the switch from “READ” to “TEST” and
without requiring any external equipment,
users can ensure the accuracy of the meter.
In the “TEST” mode, the HI146-00 shows
0.0 °C (32.0°F) with an accuracy of ±0.3°C
(±0.5°F). With this Hanna innovation, the
accuracy can be checked throughout the life
of the thermometer without requiring any
accessories or additional investments.
Resolution 0.1°C
Temperature Probe stainless steel probe (fixed) with 2 m (6.6’) cable; 160 x dia 3 mm (6.3 x dia 0.1’’)
www.hannainst.com | 1.49
HI147
1 Checkfridge®
Remote Sensor
Thermometer
• CAL Check™
·· Alerts users of calibration status
• BEPS
·· Alerts the user of low battery power
that could adversely affect readings
Testers and Monitors
Accuracy ±0.3°C (-20 to 90°C); ±0.5°C (outside) ±0.6°F (-4 to 194°F); ±1°F (outside)
Temperature Probe stainless steel, general purpose with 1 m (3.3’) cable (fixed); 40 x dia 5 mm (1.6 x dia 0.2’’)
Dimensions
93 x 39 x 31 mm (3.7 x 1.5 x 1.2’’)
(meter only)
1.50 | www.hannainst.com
Replacement Electrodes 1
113 mm
59 mm
59 mm
59 mm
78 mm
18 mm
18 mm
18 mm
08 mm 08 mm
accessories
Description pH electrode ORP electrode EC/TDS electrode pH electrode pH electrode
Max Pressure 0.1 bar 0.1 bar 0.1 bar 0.1 bar
Tip /Shape spheric (dia: 5.0 mm) platinum pin spheric (dia: 3.0 mm) spheric (dia: 3.0 mm)
Temperature Sensor no no no no no
Amplifier no no no no no
Cable no no no no no
general purpose, general purpose, general purpose, general purpose, general purpose,
Recommended Use
field applications field applications field applications field applications field applications
www.hannainst.com | 1.51
1 Replacement Electrodes
Testers and Monitors
110 mm
110 mm
163 mm
50 mm
75 mm
190 mm
120 mm
105 mm
014 mm
012 mm
15 mm
pre-amplified pH and
Description pH electrode pH electrode pH electrode pH electrode pH electrode
EC probe
Reference single, Ag/AgCl single, Ag/AgCl single, Ag/AgCl single, Ag/AgCl double, Ag/AgCl double, Ag/AgCl
Max Pressure 0.1 bar 0.1 bar 2 bar .2 bar 3 bar 3 bar
Tip /Shape spheric (dia: 5.0 mm) spheric (dia: 5.0 mm) spheric (dia: 5.0 mm) spheric (dia: 8.5 mm) spheric (dia: 7.5 mm) spheric (dia: 7.5 mm)
general purpose, general purpose, general purpose, hydroponics, aquaponics, general purpose, water hydroponics,
Recommended Use
field applications field applications field applications greenhouses treatment, agriculture greenhouses
1.52 | www.hannainst.com
Table of Contents 2
pH
Introduction�������������������������� 2.2 Portable������������������������������� 2.52 Laboratory Electrodes��������������������������������2.122
table of contents
Combination�������������������������������������������2.122
Direct Soil Specific������������������������������������������ 2.79
Comparison Guides��������������������������������������������2.4 Special�������������������������������������������������������2.126
Plating Bath Specific�������������������������������������2.80
With Temperature Sensor���������������2.127
Boiler and Cooling Tower Specific����������� 2.81
Rugged������������������������������������������������������2.128
edge®blu Leather and Paper Specific������������������������2.82
Digital Electrodes
Skin Specific������������������������������������������������������� 2.83 (3.5 mm connection)���������������������������2.129
pH meter with HALO�����������������������������������������2.8
Milk Specific��������������������������������������������2.60; 2.84 Food Specific Electrodes���������������������������2.132
Yogurt Specific�������������������������������������2.68; 2.88 Specific Analysis��������������������������������������������2.136
pH and ORP Half Cells����������������������������������2.139
HALO® Family Cheese Specific�������������������������������������2.72; 2.92
Reference���������������������������������������������������������2.140
HACCP Food and Dairy Specific���� 2.56; 2.96
Wireless pH Meters�����������������������������������������2.14 Extension Cables�������������������������������������������2.138
HACCP Meat Specific������������������������� 2.64; 2.97
Hanna Lab App�������������������������������������������������2.28 Drinking Water��������������������������������������������������2.98
Beer Analysis���������������������������������������������������2.100 pH and ORP Solutions���� 2.142
Wine Analysis��������������������������������������������������2.102 Introduction�����������������������������������������������������2.142
edge® General pH Portable Meters������������������� 2.104 Calibration���������������������������������������������������������2.146
Education Portable Meters����������������������2.106 Technical��������������������������������������������������2.146
edge����������������������������������������������������������������������� 2.32
pH/mV Simulator�������������������������������������������2.107 Millesimal�������������������������������������������������2.148
edge pH���������������������������������������������������������������� 2.36
Quick Cal���������������������������������������������������2.149
Standard���������������������������������������������������2.150
pH Electrodes�����������������2.108 ORP and Sample Preparation������������������2.154
Benchtop����������������������������2.40
Introduction��������������������������������������������������������2.12 Electrode Cleaning����������������������������������������2.156
with Built-in Printer����������������������������������������2.46 Application Guides����������������������������������������2.118 Electrode Storage and Refilling�������������2.158
www.hannainst.com | 2.1
2 Introduction
separate reference probe and separate reference input. readings due to dirty or faulty pH electrodes or contaminated pH
buffer solutions during calibration.
DIN Connector: A DIN (Deutches Institut für Normung) is a circular
connector. It is used to connect amplified pH electrodes. Electrodes During the calibration process, users are prompted with a step-by-
utilizing a DIN connector feature a built-in temperature sensor. step, on-screen tutorial. After calibration, the electrode is evaluated
and the condition and response time is provided. Depending upon
Temperature Input meter, this may be a graphic of GLP information.
2.2 | www.hannainst.com
Introduction 2
pH
repeatable measurements. A warning reminder will be displayed when
buffer, however, using CAL Check allows the offset to be based on any
calibration point. The acceptable range for offset is ±30 mV although a the sensor needs calibration. Measurements can still be used under
warning may be displayed. the warning reminder.
For a variety of applications and measuring points, many Hanna Logging is a common feature for many instruments and can be used to
meters offer the ability to calibrate using more than two points. Many record readings. Two working modes are available: log-on-demand and
Hanna instruments offer 2, 3, or up to 5 calibration points for enhanced automatic or interval logging. With log-on-demand, measurements
accuracy. pH buffers 1.68, 3.00, 4.01, 6.86, 7.01, 9.18, 10.01 and 12.45 that are considered important can be saved with the press of the log
introduction
cover the entire pH range. button. With automatic or interval logging, the instrument saves all
the readings according to a specified interval. Another logging mode is
During calibration, the recognized pH buffers are temperature Auto-End logging or log on stability.
compensated by the instrument in order to account for pH variation of
buffers due to temperature. For example, a 10.01 pH buffer is 10.01 pH Many Hanna meters include graphic LCD's with features such as
only @ 25°C. A table of temperature variation is printed on the label of tutorials, contextual help, multi-language support and icons and
each pH buffer. messages to guide the user through operation and calibration.
Custom pH Buffers
Hanna has implemented the concept of custom pH buffers into many
of its instruments. This permits the user to add an industry specific
buffer for calibration. However, temperature compensation during
calibration is not implemented because the temperature variation
correlation is unknown.
www.hannainst.com | 2.3
2 Comparison Guides
Recommended Application
Five-point pH Calibration
Clogging Prevention
Calibration Buffers
iPad Compatible
Body material
Data Logging
GLP features
Battery Life
pH Range
Page
pH
HI11312 0.00-13.00 • • up to 7 • • • yes (page 2.28) • glass lab 500 hours 2.16
HI11102 0.00-12.00 • • up to 7 • • • yes (page 2.28) • glass lab 500 hours 2.17
HI13302 0.00-12.00 • • up to 7 • • • yes (page 2.28) • glass lab, test tube 500 hours 2.18
lab, small
HI10832 0.00-13.00 • • up to 7 • • • yes (page 2.28) • glass 500 hours 2.19
sample
HI12302 0.00-12.00 • • up to 7 • • • yes (page 2.28 • PEI field 500 hours 2.20
FC2022 0.00-12.00 • • up to 7 • • • yes (page 2.28) • PVDF food 500 hours 2.21
wine, must
HI10482 0.00-12.00 • • up to 7 • • • yes (page 2.28) • glass • 500 hours 2.23
and juice
FC2142 0.00-13.00 • • up to 7 • • • yes (page 2.28) • titanium brewing 500 hours 2.25
HI12922 0.00-12.00 • • up to 7 • • • yes (page 2.28) • glass direct soil 500 hours 2.26
HI14142 0.00-12.00 • • up to 7 • • • yes (page 2.28) • glass flat surfaces 500 hours 2.27
comparison guides
0.001 pH Resolution
Benchtop, Portable
8 Hour Battery Life
PC Connectivity
pH CAL Check™
& Wall-Mount
GLP Features
Data Logging
Page
edge®blu • • • • • • • • • • • • • • 2.8
edge • •* •* • • • • • • • • • • • 2.32
edge pH • • • • • • • • • • • • 2.36
2.4 | www.hannainst.com
HI122
HI208
HI2211
HI2221
HI2210
HI2209
HI22091
HI5221
HI5222
•
•
•
•
•
•
mV Two Channels
•
•
•
CAL Check ISE Measurement
•
•
•
•
•
Temperature Measurement
EC/TDS Measurement
•
•
•
•
Automatic Calibration
•
•
CAL Check™
•
0.001 pH Resolution
•
•
0.001 pH Resolution
•
•
Five-point pH Calibration
•
•
Five-point pH Calibration
•
Two Custom pH Buffers
•
•
Five Custom pH Buffers
•
•
GLP Features
•
•
GLP Features
•
Data Logging
•
•
Real Time Graphing
•
•
PC Connectivity •
•
Data Logging
•
Magnetic Stirrer
Research Grade pH Benchtop Meters
Incremental Methods
•
Laboratory Grade pH Benchtop Meters
Built-in Printer
•
•
PC Connectivity
•
•
Built-in Solution Holders
•
•
Fully Customizable
•
Analog Output
Page Page
2.40
2.44
2.51
2.50
2.50
2.49
2.49
2.46
2.48
www.hannainst.com |
Comparison Guides
2
2.5
comparison guides pH
2
2.6
comparison guides pH
HI9125
HI9124
HI9126
Comparison Guides
HI98190
HI991001
HI991003
HI991002
| www.hannainst.com
ISE Measurement
•
•
•
•
•
mV Measurement
•
•
•
•
•
•
•
Temperature Measurement
•
•
0.001 pH Resolution
•
Waterproof Portable pH Meters
pH Sensor Check™
•
•
CAL Check
•
•
•
•
•
•
•
Automatic Calibration
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Two-point pH Calibration
•
Three-point Calibration
•
Five-point Calibration
•
•
Custom Buffers
•
Backlit LCD
•
GLP Features
•
PC Connectivity
•
•
•
•
•
•
•
Auto-off
Page
2.77
2.77
2.76
2.52
2.78
2.78
2.78
Comparison Guides 2
Two-Point pH Calibration
Automatic Temperature
Meat Measurement
Soil Measurement
Drinking Water
Compensation
Wine Analysis
Beer Analysis
Plating Baths
Waterproof
pH of Skin
Foodcare
Cheese
Yogurt
BEPS
Page
Milk
pH
HI98161 • • • • • 2.56
HI98162 • • • • • 2.60
HI98163 • • • • • 2.64
HI98164 • • • • • 2.68
HI98165 • • • • • 2.72
HI99121 • • • • • • 2.79
HI99131 • • • • • • 2.80
HI99141 • • • • • • 2.81
HI99171 • • • • • • 2.82
HI99181 • • • • • • 2.83
HI99162 • • • • • • 2.84
HI99164 • • • • • • 2.88
HI99165 • • • • • • 2.92
HI99161 • • • • • • 2.96
HI99163 • • • • • • 2.97
HI99192 • • • • • • 2.98
comparison guides
HI99151 • • • • • • 2.100
HI99111 • • • • • • 2.102
Pre-amplified pH Electrode
Two-Point pH Calibration
HOLD Function
Auto-off
Page
HI8424 • • • • • • • • 2.104
HI8314 • • • • • • 2.105
HI83141 • • • • • 2.105
HI8014 • • 2.106
HI8010 • 2.106
HI8427 • • 2.107
HI931001 • 2.107
www.hannainst.com | 2.7
First pH meter in the world with a
2 Bluetooth® Smart pH electrode
Free yourself from wires when performing pH measurements. Hanna
Instruments is proud to introduce edge®blu, a pH meter that uses
HALO® pH electrodes with Bluetooth® Smart technology (Bluetooth
4.0). Bluetooth® Smart technology is energy efficient, allowing for low
power consumption to maximize the life of the replaceable battery
used in the pH electrode.
Apple, the Apple logo, iPhone and iPad are trademarks of Apple Inc., registered in the U.S. and other countries.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
2.8 | www.hannainst.com
edge®blu technical edge blu design
features features 2
Rechargeable Battery
edge blu has a built in rechargeable battery
that is charged when the meter is in the
plugged in benchtop or wall mount cradle. The
battery can also be recharged through the
micro USB port with either a USB port from a
CAL Check™
computer or directly to the power supply. Hanna’s exclusive CAL Check feature
analyzes the pH electrode response in the
pH buffers during the calibration process to
alert the user of potential problems such as a Capacitive touch keypad
contaminated buffer or dirty electrode. After edge blu features sensitive capacitive touch
calibration, indicators for probe condition are buttons for accurate keystrokes when
displayed on the measurement screen. The navigating edge’s menus and screens. Since
pH
probe condition is based on offset and slope they are part of the screen, the buttons can
characteristics of the pH electrode. never get clogged with sample residue.
edge®blu
Data logging
Log-on-demand, log-on-stability, and interval
logging modes are all available. Up to 200
data points can be logged on demand and
an additional 200 data points for samples
logged upon a stable reading. Interval logging
is adjustable from 5 seconds to 180 minutes. Auto-detection
Up to 600 records can be stored in a maximum
At a push of the button, the HALO pH
of 100 interval lots. Logging modes can be
electrode enters discovery mode and will
started from the meter or by simply pressing
be detected by edge blu. Once connected,
the button on the HALO pH probe.
the serial number, calibration information
including date, time and buffers used, and the
GLP Zero footprint
electrode specifications will be loaded into the
Data of the last calibration you perform meter. Having this information stored in the Using the wall mount cradle (included), edge
is stored in the sensor including the date, electrode allows for hot swapping to other pH blu can be placed on a wall, leaving zero
time, and buffers used. When the sensor electrodes without recalibrating. The details footprint on the benchtop space. The cradle
is connected to edge blu, GLP data is of the electrode and calibration information has a built-in connector to power and charge
automatically transferred. are stored with any logged readings. the batteries.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
www.hannainst.com | 2.9
2
pH
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
2.10 | www.hannainst.com
2
pH
HI181 magnetic
stirrer and beaker
not included.
edge®blu
edge blu additional features
• Resolution selectable from • CAL Check™ Indicators: • Calibration expiration warning
0.01 and 0.001 pH ·· Probe condition
• Basic mode
·· Response time
• Range -2.000 to 16.000 pH ·· You can use edge®blu Basic Mode—ideal
·· Check buffer
for routine measurements by displaying
• Accuracy ±0.002 pH for 0.001 pH ·· Clean electrode
a simplified screen and features
resolution; ±0.01 for 0.01 resolution • GLP data
• Standby mode
·· Records date, time, offset, slope, and
• Data logging ·· HALO® can be switched between
buffers used during calibration
·· Manual log-on-demand standby and measurement mode
·· Manual log-on-stability • Five-point calibration by edge blu. When measurement
·· Interval logging ·· A choice of seven pre-programmed is resumed, HALO is automatically
buffers plus two custom buffers recognized. Standby mode is ideal
• Temperature readout (°C or °F)
• Calibration tag on screen for applications such as aquariums
• Automatic Temperature ·· Identifies buffers used for when only periodic measurements
Compensation (ATC) current calibration are needed in the same sample.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
www.hannainst.com | 2.11
HI11102 HALO pH electrode with
2 Bluetooth® Smart technology
edge blu® is supplied with the HI11102 HALO® professional pH probe with Bluetooth® Smart
technology (Bluetooth 4.0). This probe is compatible with the edge blu and the Hanna Lab App¹.
The HI11102 HALO pH electrode is a glass body, gel filled, double junction pH electrode that
has an indicating probe made with general purpose glass. The glass body is resistant to
many chemicals and easy to clean. Being gel filled reduces maintenance since there are no
fill solutions to add. The double junction design is suitable for a variety of solutions that can
contain substances such as heavy metals or Tris buffer that will cause the silver chloride (AgCl)
found in a single junction probe to precipitate and clog the junction.
The Hanna Lab App turns compatible smart phone or tablet into a full-
featured pH meter when used with a HALO pH probe via Bluetooth®
edge®blu
• Connects via Bluetooth® 4.0 • Full GLP • Four ways to save and share data:
·· Displays date and time of current ·· All data since last auto save
• Calibration reminder
calibration, probe offset, and ·· Annotations only
• Real-time data average slope along with calibrated ·· All data within a timed interval
·· Displays updated pH and temperature buffers, mV values, temperature ·· Annotations within a timed interval
updated every second and slopes between each buffer
• Share data via email in CSV format
• Measurement alarms • Fluid, dynamic graphing
• Help and tutorials
·· Alerts users if the measurement ·· Measurement can be displayed
threshold is exceeded with tabulated data or as a graph
• Basic GLP • One button sample tagging
·· Displays date and time of current
• Data-logging with custom annotations
calibration along with probe
·· Data is automatically saved every hour
offset and average slope
·· Saved log files may be annotated with
measurement specific information
Apple, the Apple logo, iPhone and iPad are trademarks of Apple Inc., registered in the U.S. and other countries.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
| www.hannainst.com
¹ HALO electrodes can only be used with one compatible device at a time.
2.12
Specifications edge®blu*
Range 2 -2.00 to 16.00 pH; -2.000 to 16.000 pH†
2
Resolution 0.01 pH; 0.001 pH†
Temperature
automatic, -5.0 to 100.0°C (23.0 to 212.0°F) (using integral temperature sensor)
Compensation2
Electrode Diagnostics standard mode: probe condition, response time, and out of calibration range
Range ±1000 mV
mV pH Resolution 0.1 mV
pH
Probe HI11102 HALO® glass body pH electrode with Bluetooth® Smart technology
up to 1000† (400 for basic mode) records organized in: manual log-on-demand (max. 200 logs), manual log-on-stability
Logging
(max. 200 logs), interval logging† (max. 600 samples; 100 lots)
Connectivity 1 USB port for storage; 1 micro USB port for charging and PC connectivity
Additional
Specifications Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing
HI2202-01 (115V) and HI2202-02 (230V) edge blu includes: HI11102 HALO pH electrode with Bluetooth® Smart technology, pH 4 buffer solution
Ordering
sachets (4), pH 7 buffer solution sachets (2), pH 10 buffer solution sachets (2), electrode cleaning solution sachets (2), battery for HALO, benchtop
Information docking station with electrode holder, wall-mount cradle, USB cable, 5 VDC power adapter, quality certificates and instruction manual.
edge®blu
0.1°C (0.1°F)
Bulb Shape spheric
Download
Information
Apple, the Apple logo, iPhone and iPad are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
Wireless pH Meters
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
2.14 | www.hannainst.com
2
pH
One Button Sample Tagging
Pressing the button on the HALO® pH probe
or the probe icon in the Hanna Lab App will tag
sample data for easy reference.
HALO
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc.
www.hannainst.com | 2.15
HI11312
2
Compatible with:
iOS
Android™
35 mm
edge®blu
Ideal for lab applications
40 mm
device to be used as a pH meter. The electrode is a general purpose,
glass body pH electrode ideal for routine laboratory measurement.
• Glass body
·· Non-porous surface that withstands harsh chemicals
• Double junction
·· Silver free outer reference that is compatible with most samples
pH
195 mm
·· High accuracy temperature compensated measurements
• Refillable
·· Allows the filling of the reference cell
with electrolyte fill solution
120 mm
Glass Body
The glass body of the HI11312 is resistant to many harsh chemicals and
is easy to clean making it ideal for general laboratory use.
Double Junction
HI11312 is a double junction pH electrode in which the Ag/AgCl
necessary for the reference cell is located behind an inner ceramic
junction. The gel electrolyte between the inner and outer junction is
silver free. This is important to prevent the precipitation of silver by
Tris buffer, metals, and sulfides that would clog the junction leading to
erratic readings.
09 mm
012 mm
HI11312 is a refillable pH electrode. Fill solution from the inside will Body Material glass
diffuse through the ceramic junction as it is used and stored in storage Tip / Shape spheric
solution. Electrolyte fill solution should be added to the probe when the Temperature Operating Range -5 to 80°C (23 to 176°F)
level drops more than 1 cm (1/2”) from the fill hole in order to maintain a
Body Length/Overall Length 120 mm / 195 mm
good flow rate sustained by having adequate head pressure.
Temperature Sensor integrated
Apple, the Apple logo, iPhone and iPad are trademarks of Apple Inc., registered in the U.S. and other countries.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
iOS 2
Android™
35 mm
edge®blu
28 mm
HI11102 HALO is an innovative, pH electrode with Bluetooth® Smart
technology that allows the use of a compatible Apple or Android smart
device to be used as a pH meter. This general purpose, glass body pH
electrode is ideal for users that would prefer a laboratory pH electrode
without the refill solution maintenance.
• Glass body
·· Non-porous surface that withstands harsh chemicals
• Double junction
183 mm
pH
• Built-in temperature sensor
Also included
·· High accuracy temperature compensated measurements
with edge®blu
• Gel-filled reference
·· Maintenance free with no fill solutions required
120 mm
Glass Body
The glass body of the HI11102 is ideal for laboratory use and for users
that prefer to have a traditional laboratory pH electrode without
having to maintain the proper fill solution level. The glass is resistant
to many harsh chemicals and is easy to clean.
Double Junction
HI11102 is a double junction pH electrode in which the Ag/AgCl
09 mm necessary for the reference cell is located behind an inner ceramic
012 mm junction. The gel electrolyte between the inner and outer junction is
silver free. This is important to prevent the precipitation of silver by
Tris buffer, metals, and sulfides that would clog the junction leading to
erratic readings.
HALO
HALO Specifications HI11102
Built-in Temperature Sensor
Measurement Range 0.00 to 12.00 pH HI11102 has a thermistor temperature sensor built into the tip of
the pH electrode. A thermistor based temperature sensor provides
Reference Cell Type double, Ag/AgCl
for a high accuracy temperature reading while being in the tip of the
Junction Type ceramic electrode allows for a rapid determination of the temperature as it
Electrolyte gel impacts the effect on the glass membrane potential.
Body Material glass
Apple, the Apple logo, iPhone and iPad are trademarks of Apple Inc., registered in the U.S. and other countries.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
35 mm
edge®blu
Ideal for test tube applications
28 mm
Bluetooth® Smart technology that allows the use of a compatible
Apple or Android smart device to be used as a pH meter. This electrode
is designed for taking pH measurements in test tubes that are used
by university, pharmaceutical, biotechnology, and food laboratories
customers.
183 mm
pH
120 mm
Small 5 mm Diameter Bulb and Body
HI13302 has a small pH-sensing bulb that is only 5 mm in diameter
by 80 mm in length. The small diameter of the probe allows for pH
measurements in test tubes, vials, and other small containers.
The reference half-cell has an open junction design in order to HALO Specifications HI13302
accommodate the 5 mm micro bulb and shaft. The open junction Measurement Range 0.00 to 12.00 pH
design is resistant to clogging from suspended solids and proteins
Reference Cell Type double, Ag/AgCl
found in biological samples. Any clogging that occurs will impede the
measurement circuit between the indicating electrode and the internal Junction Type open junction
reference resulting in slower response time and erratic readings. Electrolyte Viscolene
iOS 2
Android™
edge®blu
35 mm
Ideal for small sample
lab applications
pH
• Open junction design
·· Resists clogging and provides for fast response time
• Gel-filled reference
·· Maintenance free with no fill solutions required
HALO
HALO Specifications HI10832 Maintenance Free Gel-filled Reference
Measurement Range 0.00 to 13.00 pH The open junction design consists of a solid gel (viscolene) interface
Reference Cell Type double, Ag/AgCl between the sample and internal ceramic reference junction. Other
Junction Type open than routine calibration and cleaning, this probe is maintenance free.
Electrolyte Viscolene
2
Compatible with:
iOS
Android™
35 mm
edge®blu
Ideal for field applications
28 mm
technology that allows the use of a compatible Apple or Android smart
device to be used as a pH meter. HI12302 is a general purpose, PEI
plastic body pH electrode for routine measurements in the field, lab
or at home.
165 mm
• Double Junction
·· Silver free outer reference that is compatible with most samples
pH
100 mm
·· Maintenance free with no fill solutions required
the electrode.
Double Junction
HI12302 is a double junction pH electrode in which the Ag/AgCl
necessary for the reference cell is located behind an inner ceramic
junction. The electrolyte between the inner and outer junction is
silver free. This is important to prevent the precipitation of silver by
HALO
Tris buffer, metals, and sulfides that would clog the junction leading to
erratic readings. HALO Specifications HI12302
Measurement Range 0.00 to 12.00 pH
A thermistor temperature sensor built into the tip of the pH electrode. Junction Type ceramic
A thermistor based temperature sensor provides for a high accuracy Electrolyte gel
temperature reading while being in the tip of the electrode allows for a
Body Material PEI
rapid determination of the temperature as it impacts the effect on the
glass membrane potential. Tip / Shape dome
HI12302 contains a silver free gel in the outer reference cell. There is Temperature Sensor integrated
no fill solution to replenish as the probe is used. Other than routine Outer Diameter 12 mm (plastic)
calibration and cleaning, this probe is maintenance free.
Connector Type Bluetooth Smart (Bluetooth 4.0), 10 m (33’) range
Apple, the Apple logo, iPhone and iPad are trademarks of Apple Inc., registered in the U.S. and other countries.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
iOS 2
Android™
edge®blu
35 mm
Ideal for food applications
• Conic bulb
·· Easy penetration into soft solids and semi-solids
• Low temperature glass
134 mm
pH
• Open junction
·· Resists clogging and provides fast response time
• Gel-filled reference
·· Maintenance free with no fill solutions required
70 mm
06 mm
Conic Bulb
The conical shaped tip design allows for the easy penetration of the
sensor into soft solids and semi-solids such as cheeses, yogurt, meats,
and sauces. It doesn’t trap foods and is very easy to wipe clean.
HALO
HALO Specifications FC2022 Open Junction Design
Measurement Range 0.00 to 12.00 pH The open junction design consists of a solid gel (viscolene) interface
Reference Cell Type double, Ag/AgCl between the sample and internal reference. This interface not
only prevents silver from entering the sample, but also makes it
Junction Type open
impermeable to clogging from food products, maintaining a fast
Electrolyte Viscolene response and stable reading.
Body Material PVDF
Apple, the Apple logo, iPhone and iPad are trademarks of Apple Inc., registered in the U.S. and other countries.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
Most wines optimally have a pH between 2.9 and 4.0, with values differing based on the type of wine. Values above pH 4.0
indicate that the wine may spoil quickly and be chemically unstable. Lower pH values allow the wine to stay fresher for a longer
period and retain its original color and flavor. High pH wine is more likely to breed bacteria and become unsuitable to drink. For
finished white wines, the ideal pH is between pH 3.00 and pH 3.30, while the final pH for red wine is ideally between pH 3.40
and pH 3.50. The optimal pH before the fermentation process is between pH 2.9 and pH 4.0. The pH of wine therefore not only
affects the color of wine, but also the oxidation, yeast fermentation, protein stability and bacteria growth and fermentation.
HALO
2.22 | www.hannainst.com
HI10482
Compatible with:
iOS
2
Android™
35 mm
edge®blu
pH
195 mm
measurements in wine juice and must samples that have high solids
content. Conventional pH electrodes use ceramic junctions that can
clog quickly from solids found in juice and must. When the junction is
clogged, the electrode does not function properly and erratic readings
can result. CPS technology utilizes a ground glass junction coupled
with a movable PE sleeve to prevent clogging. The ground glass allows
proper flow of the liquid, while the PE sleeve repels solids. As a result,
pH electrodes with CPS technology take up to 20 times longer to be
CPS™ fouled as compared to conventional electrodes. When the electrode
(Clogging Prevention System) becomes fouled the PE sleeve can be moved to clean the ground glass
surface rejuvenating the junction and extending probe life.
08 mm
012 mm Refillable
HI10482 is a refillable double junction pH electrode. Fill solution from
HALO
inside the probe will diffuse through the ground glass junction while
HALO Specifications HI10482 it is in use and when it is stored in storage solution. Electrolyte fill
solution should be added to the probe when the level drops more
Measurement Range 0.00 to 12.00 pH
than 1 cm (1/2”) from the fill hole in order to maintain a good flow rate
Reference Cell Type double, Ag/AgCl
sustained by having adequate head pressure.
Junction Type movable open junction
Environment
0 to 50°C (23 to 122°F); electronic module is not Customized Calibration Buffer Value
waterproof
The average pH of wine influences the choice of calibration buffers
HI10482 (HALO) is supplied with storage solution,
Ordering cleaning solution, pH 7.01 buffer solution, pH
that should be used. Generally, most wines have a finished pH between
Information 3.00 buffer solution, fill solution, battery, quality 3 and 4. To ensure a high accuracy measurement, the HI10482 will
certificate and instruction sheet. prompt for pH 3.00 buffer in place of pH 4.01. This allows the calibration
to bracket the expected value to be measured.
Apple, the Apple logo, iPhone and iPad are trademarks of Apple Inc., registered in the U.S. and other countries.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
pH in Beer
In the brewing process, the enzymes required to convert the starch into sugar are pH-sensitive with an optimal pH range between 5.2 pH
and 5.6 pH. Different compounds are used to adjust the pH including phosphoric acid, lactic acid, and gypsum.
Wort clarity and break formation are also affected by pH. Protein coagulation occurs during wort boiling, where the optimum pH is around
4.9, even though a common boil pH is 5.2. A pH that is too high will not only inhibit coagulation but also promote browning due to the
interaction of amino acids and reducing sugars.
Hop utilization during the wort boil is also affected by pH. As pH increases, the solubility of hop resins increases. Unfortunately for hop
lovers, a high pH also increases the release of tannins resulting in a harsher taste. Higher pH also favors elevated microbial activity.
As a living catalyst, yeast maintains a pH around 6.5 within its cells; however, the preference is to inhabit a more acidic environment.
During the fermentation stage, the pH should be lower to accommodate the yeast and also to ensure microbial stability and consistent
flavoring of the beer; an optimal pH range during fermentation is between pH 4.1 and 4.3.
HALO
2.24 | www.hannainst.com
FC2142
2
Compatible with:
iOS
Android™
35 mm
edge®blu
Ideal for brewers
pH
• Built-in temperature sensor
·· High accuracy temperature compensated measurements
• Titanium body
·· Provides protection even at high temperatures
as well as stability of measurement
120 mm
Extractable Cloth
Junction
012.7 mm
The advantage of the cloth
junction is that it can be
extracted from the probe
exposing a fresh surface. This
is very important since one
HALO
of the major contributors to
HALO Specifications FC2142 unstable measurements is a
clogged junction. This is likely
Measurement Range 0.00 to 13.00 pH
to occur when measuring the
Reference Cell Type double, Ag/AgCl pH of mash that has a high
Junction Type cloth solids content. Pulling out a
Electrolyte gel
small portion of the junction exposes a clean, unclogged portion that
increases response time and extends the life of the pH electrode.
Body Material titanium
2 iOS
Android™
edge®blu
35 mm
Ideal for direct soil applications
40 mm
is designed for agricultural, hydroponics and greenhouse growers that
need to monitor the pH of soil and soiless media in order to optimize
plant growth.
• Conic bulb
·· Easy penetration into soft solids and semi-solids
• Triple ceramic junction
pH
195 mm
·· High flow rate for fast and stable response
in slightly hydrated media
• Refillable
·· Allows the filling of the reference cell
with electrolyte fill solution
• Built-in temperature sensor
·· High accuracy temperature compensated measurements
120 mm
Conic Bulb
The conical shaped tip design allows for the easy penetration of the
sensor into soft solids and semi-solids such as soil and soiless media.
Soiless media includes hydroponics growing media including rockwool,
coconut coir, and perlite.
which helps provide for a fast and stable response in damp soil and
soiless media. HALO Specifications HI12922
Measurement Range 0.00 to 12.00 pH
HI12922 is a refillable pH electrode. Fill solution from the inside will Junction Type triple ceramic
diffuse through the ceramic junctions as it is used and while stored Electrolyte 3.5M KCl (refillable)
in storage solution. Electrolyte fill solution should be added to the
Body Material glass
probe when the level drops more than 1 cm (1/2”) from the fill hole in
order to maintain a good flow rate sustained by having adequate head Tip / Shape conic
iOS 2
Android™
edge®blu
35 mm
Ideal for flat surfaces
• Flat bulb
·· Measure pH on flat surfaces or small volume samples
• Low temperature glass
·· Fast and accurate measurement at lower temperatures
114 mm
• Open junction
50 mm
pH
• Gel-filled reference
·· Maintenance free with no fill solutions required
• Built-in temperature sensor
·· High accuracy temperature compensated measurements
12 mm
HALO
response and stable reading.
HALO Specifications HI14142
Measurement Range 0.00 to 12.00 pH
Maintenance Free Gel-filled Reference
Reference Cell Type double, Ag/AgCl
Because the internal reference is gel, there is no fill solution to
Junction Type open replenish as the probe is used. Other than routine calibration and
Electrolyte Viscolene cleaning, this a maintenance free probe.
Body Material glass
2.28 | www.hannainst.com Apple, the Apple logo, iPhone and iPad are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. Android, Google Play and the Google Play logo are trademarks of Google Inc.
2
pH
Real-time Data
Displays updated pH and
temperature every second
www.hannainst.com | 2.29
2
pH
Hanna Lab App
Data Logging
2.30 | www.hannainst.com
GLP (Good Laboratory Practice) Calibration Additional Features
2
pH
For tablet displays, basic GLP can be also the measurement screen, graph, and
of up to five points. The buffer value is
displayed in table and graph views. table. Readings that exceed the probe
automatically detected and temperature
specifications are highlighted in red.
corrected to 25.0°C during calibration.
±0.005 pH;
Accuracy (@25°C/77°F) ±0.3 mV;
±0.5°C (±1.0°F) Help and Tutorials:
Calibration Points
up to five-point calibration with seven standard buffers The Hanna Lab App also features demo probe
(1.68, 3.00 (HI10482 only) or 4.01, 6.86, 7.01, 9.18, 10.01, 12.45 pH) mode, general app information, general
Temperature Compensation** automatic from -5.0 to 100.0 °C — 23.0 to 212.0 °F HALO information, pH tutorial, maintenance
Compatibility/System Requirements see www.hannainst.com for latest compatibility requirements
tutorial, and contact information.
Download Information
Apple, the Apple logo, iPhone and iPad are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. Android, Google Play and the Google Play logo are trademarks of Google Inc.
www.hannainst.com | 2.31
2
pH • EC • DO
pH
edge
2.32 | www.hannainst.com
edge® technical edge design features
features
2
Rechargeable Battery
edge has a built in rechargeable battery that
is charged when the meter is in the plugged
in benchtop or wall mount cradle. The battery
can also be recharged through the micro USB
port with either a USB port from a computer or
directly to the power supply.
GLP
Data of the last calibration you perform
is stored in the sensor including the date,
Capacitive touch keypad
time, and buffers used. When the sensor is
edge features sensitive capacitive touch
pH
connected to edge, GLP data is automatically
transferred. buttons for accurate keystrokes when
navigating edge’s menus and screens. Since
Two Operating Modes they are part of the screen, the buttons can
Two USB ports
edge can be used in Extended or Basic never get clogged with sample residue.
edge includes one standard USB for exporting
Operating Modes. Extended Mode enables
data to a flash drive. edge also includes one
all edge features while Basic Mode reduces
micro USB port for exporting files to your features—ideal for routine measurements by
computer as well as for charging when the displaying a simplified screen and features.
5.5"
cradle is not available.
edge
edge features clear, full text guides displayed analyzes the pH electrode response in the
on the bottom of the screen. There is no pH buffers during the calibration process to
need to decipher scrambled abbreviations or alert the user of potential problems such as a
symbols; these helpful messages guide you contaminated buffer or dirty electrode. After
through every process quickly and easily. calibration, indicators for probe condition are
displayed on the measurement screen. The
probe condition is based on offset and slope
characteristics of the pH electrode.
www.hannainst.com | 2.33
2
pH
2.34 | www.hannainst.com
• Resolution selectable from • GLP data 2
0.01 and 0.001 pH ·· Records date, time, offset, slope and
buffers used during calibration
• Range -2.000 to 16.000 pH
• Five-point calibration
• Accuracy ±0.002 pH for 0.001 pH
·· A choice of seven pre-
resolution; ±0.01 for 0.01 resolution
programmed buffers plus two
• Data logging selectable custom buffers
·· Manual log-on-demand
• Calibration tag on screen
·· Manual log-on-stability
·· Identifies buffers used for
·· Interval logging
current calibration
pH
·· Response time
data and a serial number when connected to ·· Check buffer
edge by an easy to plug-in 3.5mm connector. ·· Clean electrode Sleek design
• Simply connect each probe via the • Sensor Check™ Indicators: Incredibly thin and lightweight, edge
3.5 mm jack, Digital Smart Electrodes ·· Broken electrode measures just 1/2” (12 mm) thick and
are automatically recognized ·· Clogged junction weighs just 8.8 ounces (250 g).
Specifications HI2020
Range* -2.00 to 16.00 pH; -2.000 to 16.000 pH†
edge
Calibration
(1.68†, 4.01 or 3.00, 6.86, 7.01, 9.18, 10.01, 12.45†) and two custom buffers†
Temperature Compensation* automatic, -5.0 to 100.0°C (23.0 to 212.0°F) (using integral temperature sensor)
Electrode Diagnostics standard mode: probe condition, response time and out of calibration range
Range ±1000 mV
mV pH Resolution 0.1 mV
Probe (included in pH kit) HI11310 digital glass body pH electrode with 3.5 mm (1/8”) connector and 1 m (3.3’) cable
up to 1000† (400 for basic mode) records organized in: manual log-on-demand (max. 200 logs),
Logging
manual log-on-stability (max. 200 logs), interval logging† (max. 600 samples; 100 lots)
Additional Connectivity 1 USB port for storage; 1 micro USB port for charging and PC connectivity
Specifications
Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing
Dimensions / Weight 202 x 140 x 12 mm (7.9” x 5.5” x 0.5”) / 250 g (8.82 oz.)
HI2020-01 (115V) and HI2020-02 (230V) pH kit includes: HI11310 glass body, refillable pH electrode, pH 4 buffer solution sachets (4),
Ordering pH 7 buffer solution sachets (2), pH 10 buffer solution sachets (2), and electrode cleaning solution sachets (2), benchtop docking station with electrode
Information holder, wall-mount cradle, USB cable, 5 VDC power adapter, quality certificates and instruction manual.
All edge compatible pH, EC and DO digital probes are interchangeable with HI2020 and can be ordered separately.
pH and ORP solutions begin on page 2.142; edge pH digital electrodes begin on page 2.129 www.hannainst.com | 2.35
pH
2
pH
edge®pH
2.36 | www.hannainst.com
edge®pH technical edge pH design
features features 2
Rechargeable Battery
edge pH has a built in rechargeable battery
that is charged when the meter is in the
plugged in benchtop or wall mount cradle. The
battery can also be recharged through the
micro USB port with either a USB port from a
computer or directly to the power supply.
GLP
Data of the last calibration you perform
is stored in the sensor including the date,
time, and buffers used. When the sensor Capacitive touch keypad
is connected to edge pH, GLP data is
pH
edge pH features sensitive capacitive touch
automatically transferred.
buttons for accurate keystrokes when
navigating edge’s menus and screens. Since
Two USB ports Two Operating Modes they are part of the screen, the buttons can
edge pH includes one standard USB for edge pH can be used in Extended or Basic never get clogged with sample residue.
exporting data to a flash drive. edge blu also Operating Modes. Extended Mode enables
includes one micro USB port for exporting all edge features while Basic Mode reduces
files to your computer as well as for charging features—ideal for routine measurements by
when the cradle is not available. displaying a simplified screen and features.
5.5"
CAL Check™ (16.4’). The large display, with its wide 150°
Clear, full text readout viewing angle, provides one of the easiest to
edge®pH
Hanna’s exclusive CAL Check feature
edge pH features clear, full text guides read LCDs in the industry.
analyzes the pH electrode response in the
displayed on the bottom of the screen.
pH buffers during the calibration process to
There is no need to decipher scrambled
alert the user of potential problems such as a
abbreviations or symbols; these helpful
contaminated buffer or dirty electrode. After
messages guide you through every process
calibration, indicators for probe condition are
quickly and easily.
displayed on the measurement screen. The
probe condition is based on offset and slope
characteristics of the pH electrode.
Sensor Check™
When used with Hanna’s electrodes equipped
with a matching pin, edge constantly checks
the impedance of the pH measuring electrode
to notify you in real time in the event of
glass breakage. During calibration, Sensor
Check checks the state of the junction. The
reference junction is also evaluated and Zero footprint
reported on the display. Using the wall mount cradle (included), edge
Data logging pH can be placed on a wall, leaving zero
edge pH allows you to store up to 1000 log
ORP Measurement footprint on the benchtop space. The cradle
records of data. Data sets include readings, edge pH measures ORP with edge compatible has a built-in connector to power and charge
GLP data, date and time. ORP probes. the batteries.
www.hannainst.com | 2.37
2
pH
2.38 | www.hannainst.com
2
Sleek design
Incredibly thin and lightweight, edge®pH
pH
measures just 1/2” (12 mm) thick and weighs
just 8.8 ounces (250 g).
Specifications edge pH
Range* -2.00 to 16.00 pH; -2.000 to 16.000 pH†
Accuracy
±0.01 pH; ±0.002 pH†
(@25°C/77°F)
pH automatic, up to three points (five points†) calibration, 5 standard (7 standard†) buffers available (1.68†, 4.01 or 3.00,
Calibration
6.86, 7.01, 9.18, 10.01, 12.45†) and two custom buffers†
Temperature
automatic, -5.0 to 100.0°C (23.0 to 212.0°F) (using integral temperature sensor)
Compensation*
Electrode Diagnostics standard mode: probe condition, response time and out of calibration range
Range ±1000 mV
Resolution 0.1 mV
edge®pH
mV pH
Accuracy
±0.2 mV
(@25°C/77°F)
Range ±2000 mV
Resolution 0.1 mV
ORP Accuracy
±0.2 mV (±999.9 mV); ±1 mV (±2000 mV)
(@25°C/77°F)
Probe HI11310 digital glass body pH electrode with 3.5 mm (1/8”) connector and 1 m (3.3’) cable
up to 1000† (400 for basic mode) records organized in: manual log-on-demand (max. 200 logs),
Logging
manual log-on-stability (max. 200 logs), interval logging† (max. 600 samples; 100 lots)
Connectivity 1 USB port for storage; 1 micro USB port for charging and PC connectivity
Additional
Specifications Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing
HI2002-01 (115V) and HI2002-02 (230V) edge pH includes: HI11310 glass body, refillable pH electrode, pH 4 buffer solution sachets (4), pH 7 buffer
Ordering
solution sachets (2), pH 10 buffer solution sachets (2), electrode cleaning solution sachets (2), benchtop docking station with electrode holder, wall-
Information mount cradle, USB cable, 5 VDC power adapter, quality certificates and instruction manual.
pH and ORP solutions begin on page 2.142; edge pH digital electrodes begin on page 2.129 www.hannainst.com | 2.39
HI5222
The HI5222 is an advanced research grade As a pH meter the HI5222 can be calibrated concentration unit. The calibration data
benchtop pH/mV/ISE dual channel meter that up to five points with eight pre-programmed including date, time, standards used and
is completely customizable with a large color buffers or five custom buffers. The HI5222 slope can be viewed at any time along with
LCD, capacitive touch keys, and USB port for features Hanna’s exclusive CAL Check™ to the current measurement by selecting the
computer connectivity. alert the user of potential problems during
Good Laboratory Practice (GLP) display
the pH calibration process. Indicators
The HI5222 features two galvanically isolated option.
displayed during calibration include
BNC connections for use with the expansive “Electrode Dirty/Broken” and “Buffer
Three selectable logging modes are available:
line of pH, ISE and ORP electrodes that Hanna Contaminated.” The overall probe condition
Instruments offers. The meter is supplied automatic, manual and AutoHold logging. Up
based on the offset and slope characteristic
with the HI1131B glass body, double junction, to 100,000 data points per channel can be
of the electrode is displayed as a percentage
combination pH electrode that operates over after calibration is complete. recorded in 100 lots, 50,000 records max/lot
a wide range of temperature from 0 to 100°C. and exported to a computer for data review
All readings are automatically compensated As an ISE meter the HI5222 can be calibrated and storage.
for temperature variations with the separate up to five points with a choice of five
HI7662-T temperature probe that is included. fixed standards or five user defined in any
2.40 | www.hannainst.com
Customizable User Interface Choice of Calibration incremental methods are pre-programmed
2
into the HI5222. Simply follow the on screen
The user interface of the HI5222 allows Automatic buffer recognition, semi automatic,
guided procedure and the meter will perform
the user to show measurements in various and direct manual entry pH calibration
the calculation automatically allowing for
modes: basic measurement with or without options are available for calibrating up to five
a higher level of accuracy to be obtained as
GLP information, real-time graphing, and points, from a selection of eight standard
compared to a direct ISE measurement.
logging data. Calibration stability criteria buffers and up to five custom buffers.
can be adjusted from fast, moderate, and
accurate. Programmable alarm limits can be Data Logging
GLP Data
set to inside or outside allowable limits. Three selectable logging modes are available
HI5222 includes a GLP Feature that allows
on the HI5222: automatic, manual, and
Color Graphic LCD users to view calibration data and calibration
AutoHold logging. Automatic and manual
expiration information at the touch of a key.
The HI5222 features a color graphic LCD with logs up to 100 lots with 50,000 records max/
Calibration data include date, time, buffers
on-screen help, graphic, and custom color lot with up to 100,000 total data points per
used for calibration, and electrode offset and
configurations. The display allows for real- channel. Automatic logging features the
slope characteristics.
time graphing and the use of virtual keys option to save data according to sampling
provide for an intuitive user interface. period and interval.
CAL Check™
Capacitive Touch CAL Check alerts users to potential problems Data Transfer
pH
during the calibration of the pH electrode.
The HI5222 features sensitive capacitive Data can be transferred to a PC with USB
Indicators include “Electrode Dirty/Broken,”
touch buttons for accurate keystrokes when cable and HI92000 software (both sold
“Buffer Contaminated,” electrode response
navigating menus and screens. There are separately).
time and the overall probe condition as a
four dedicated keys that are used for routine
percentage that is based on the offset and
operations including calibration and switching
slope characteristics.
Contextual Help
measurement modes and four virtual keys
Contextual help is always available through a
that change based upon use. The capacitive
touch technology ensures the buttons never ISE Measurement with Choice of dedicated “HELP” key. Clear tutorial messages
and directions are available on-screen to
get clogged with sample residue. Concentration Units quickly and easily guide users through
The HI5222 allows for calibration and setup and calibration. The help information
Two Galvanically Isolated pH/
readings in choice of concentration units. The displayed is relative to the setting/option
ORP/ISE Channels choices of concentration units include ppt, being viewed.
The HI5222 has two input channels that can g/L, mg/mL, ppm, mg/L, μg/mL, ppb, μg/L,
be used for pH, ORP and ISE electrodes. Each mg/mL, M, mol/L, mmol/L, %w/v and a user-
input channel has connectors for BNC probes, defined unit.
reference probes and a temperature sensor.
Each channel is galvanically isolated which ISE Measurement with
means that two measurement probes can
be in the same solution at the same time and
Incremental Methods
the voltages produced will not interfere with The known addition, known subtraction,
benchtop
each other. analyte addition, and analyte subtraction
www.hannainst.com | 2.41
2
Additional Features by Screen
pH
Dual Channels
The two measurement channels of the HI5222 are galvanically isolated
to eliminate noise and instability.
2.42 | www.hannainst.com
2
pH
Specifications HI5222
Range -2.0 to 20.0 pH; -2.00 to 20.00; -2.000 to 20.000 pH
Temperature
automatic or manual from -20.0 to 120.0°C/-4.0 to 248.0°/253.15 to 393.15K
Compensation
Range ±2000 mV
Resolution 0.1 mV
mV
Accuracy ±0.2 mV ±1 LSD
benchtop
ISE Accuracy ±0.5% (monovalent ions); ±1% (divalent ions)
automatic, up to five-point calibration, seven fixed standard solutions available for each measurement unit,
Calibration
and five user defined standards
pH Electrode HI1131B glass body pH electrode with BNC connector and 1 m (3.3’) cable (included)
Temperature Probe HI7662-W stainless steel temperature probe with 1 m (3.3’) cable (included)
GLP calibration points, calibration time stamp, probe offset, slope, date, time and buffers/standards used
record : Up to 100 lots, 50,000 records max/lot / maximum 100,000 data points/channel;
Logging
interval: 14 selectable between 1 second and 180 minutes; type: automatic, manual, AutoHOLD;
Additional
Specifications Display color graphic LCD 240x340 pixels
PC Connection USB
HI5222-01 (115V) and HI5222-02 (230V) are supplied with HI1131B pH electrode, HI7662-W temperature probe, pH 4.01 buffer solution sachet
Ordering
(2), pH 7.01 buffer solution sachet (2), HI700601 electrode cleaning solution sachet (2), HI7082 3.5M KCl electrolyte solution (30 mL), HI76404W
Information electrode holder, 12 VDC adapter, capillary dropper pipette, quality certificate, quick start guide and instruction manual.
pH and ORP electrodes begin on page 2.122; pH and ORP solutions begin on page 2.142;
ISE electrodes and solutions begin on page 3.22; www.hannainst.com | 2.43
HI5221
The HI5221 is an advanced research grade for temperature variations with the separate is complete. The calibration data including
benchtop pH/mV meter that is completely HI7662-T temperature probe that is included. date, time, buffers used, offset and slope
customizable with a large color LCD, can be accessed at any time along with the
capacitive touch keys, and USB port for The HI5221 can be calibrated up to five points current measurement by selecting the Good
computer connectivity. with a choice of eight pre-programmed Laboratory Practice (GLP) display option.
buffers or five custom buffers. The HI5221
The HI5221 features a universal BNC features Hanna’s exclusive CAL Check™ to Three selectable logging modes are available:
connection for use with the expansive alert the user of potential problems during the automatic, manual and AutoHold logging.
line of pH and ORP electrodes that Hanna pH calibration process. Indicators displayed Up to 100,000 data points can be recorded
Instruments offers. The meter is supplied during calibration include “Electrode Dirty/ in 100 lots with 50,000 records max/lot and
with the HI1131B glass body, double junction, Broken” and “Buffer Contaminated.” The exported to a computer for data review and
combination pH electrode that operates over overall probe condition based on the offset storage.
a wide temperature range from 0 to 100°C. and slope characteristic of the electrode is
All readings are automatically compensated displayed as a percentage after calibration
2.44 | www.hannainst.com
Customizable User Interface Choice of Calibration Data Logging
The user interface of the HI5221 allows
the user to show measurements in various
Automatic buffer recognition, semiautomatic,
and direct manual entry pH calibration
Three selectable logging modes are available 2
on the HI5221: automatic, manual, and
modes: basic measurement with or without options are available for calibrating up to five AutoHold logging. Automatic and manual
GLP information, real-time graphing, and
points, from a selection of eight standard logs up to 100 lots with 50,000 records max/
logging data. Calibration stability criteria
can be adjusted from fast, moderate, and buffers and up to five custom buffers. lot, with up to 100,000 total data points.
accurate. Programmable alarm limits can be Automatic logging features the option to
set to inside or outside allowable limits. GLP Data save data according to sampling period and
Color Graphic LCD HI5221 includes a GLP feature that allows interval.
The HI5221 features a color graphic LCD with users to view calibration data and calibration
on-screen help, graphic, and custom color expiration information at the touch of a key. Data Transfer
configurations. The display allows for real- Calibration data include date, time, buffers
Data can be transferred to a PC with USB
time graphing and the use of virtual keys /standards used for calibration and slope
provide for an intuitive user interface. cable and HI92000 software (both sold
characteristics. The offset is also displayed
separately).
for pH electrodes.
Capacitive Touch
The HI5221 features sensitive capacitive
CAL Check™ Contextual Help
pH
touch buttons for accurate keystrokes
when navigating menus and screens. There CAL Check alerts users to potential problems Contextual help is always available through a
are four dedicated keys that are used for during the calibration of the pH electrode. dedicated “HELP” key. Clear tutorial messages
routine operations including calibration and Indicators include “Electrode Dirty/Broken,” and directions are available on-screen to
switching measurement modes and four quickly and easily guide users through
“Buffer Contaminated,” electrode response
virtual keys that change based upon use.
time and the overall probe condition as a setup and calibration. The help information
The capacitive touch technology ensures
the buttons never get clogged with sample percentage that is based on the offset and displayed is relative to the setting/option
residue. slope characteristics. being viewed.
Specifications HI5221
Range -2.0 to 20.0 pH; -2.00 to 20.00; -2.000 to 20.000 pH
Temperature
automatic or manual from -20.0 to 120.0°C/-4.0 to 248.0°/253.15 to 393.15K
Compensation
Range ±2000 mV
benchtop
Resolution 0.1 mV
mV
Accuracy ±0.2 mV ±1 LSD
pH Electrode HI1131B glass body pH electrode with BNC connector and 1 m (3.3’) cable (included)
Temperature Probe HI7662-W stainless steel temperature probe with 1 m (3.3’) cable (included)
GLP calibration points, calibration time stamp, probe offset, slope, date, time and buffers/standards used
record : Up to 100 lots, 50,000 records max/lot / maximum 100,000 data points/channel;
Logging
interval: 14 selectable between 1 second and 180 minutes; type: automatic, manual, AutoHOLD;
Additional
Specifications Display color graphic LCD 240x340 pixels
PC Connection USB
HI5221-01 (115V) and HI5221-02 (230V) are supplied with HI1131B pH electrode, HI7662-W temperature probe, pH 4.01 buffer solution sachet
Ordering
(2), pH 7.01 buffer solution sachet (2), HI700601 electrode cleaning solution sachet (2), HI7082 3.5M KCl electrolyte solution (30 mL), HI76404W
Information electrode holder, 12 VDC adapter, capillary dropper pipette, quality certificate, quick start guide and instruction manual.
pH and ORP electrodes begin on page 2.122; pH and ORP solutions begin on page 2.142 www.hannainst.com | 2.45
HI122
2 pH Benchtop Meter
with Built-in Printer
2.46 | www.hannainst.com
2
pH
Built-in Impact Printer Secondary keypad
The built-in impact printer incorporated into the HI122 uses regular paper that does not
fade with time. The information related to measurements being taken can be printed while
in measurement mode, GLP or Setup mode. This meter also allows users to print detailed
information in four languages for specific help screens and instrument set-up.
Specifications HI122
Range -2.00 to 16.00 pH; -2.000 to 16.000 pH
benchtop
Temperature Compensation automatic or manual from -20.0 to 120°C (-4.0 to 248.0°F)
pH Electrode HI1131P glass body pH electrode with BNC + pin connectors and 1 m (3.3’) cable (included)
Interval Logging 5 second to 180 minutes, 1000 samples (500 per channel)
Ordering HI122-01 (115V) and HI122-02 (230V) are supplied with HI1131P pH electrode, HI7662-T temperature probe, HI70004 pH 4.01 buffer solution
Information sachet, HI70007 pH 7.01 buffer solution sachet, HI7082 3.5M KCL electrolyte solution (30 mL), (5) paper rolls, 12 VDC adapter and instructions.
pH and ORP electrodes begin on page 2.122; pH and ORP solutions begin on page 2.142 www.hannainst.com | 2.47
HI2221
2 Benchtop pH/mV
Meter
with CAL Check™ Electrode Diagnostics
CAL Check
Hanna’s exclusive CAL Check diagnostics
pH
Automatic Calibration
Automatic pH calibration can be performed at
up to 5 points using 7 standard buffers (1.68,
4.01, 6.86, 7.01, 9.18,10.01, and 12.45).
with a BNC and pin connector. This design mV Resolution 0.1 mV (±699.9 mV); 1 mV (±2000 mV)
consideration is ideal for laboratory samples, Accuracy ±0.2 mV (±699.9 mV); ±1 mV (±2000 mV)
liquid samples, and high temperature
Range -20.0 to 120.0°C (-4.0 to 248.0°F)
samples, as well as general purpose use.
Temperature Resolution 0.1°C
Dimensions / Weight 235 x 222 x 109 mm (9.2 x 8.7 x 4.3”) / 1.3 Kg (2.9 lb)
Data Transfer
HI2221-01 (115V) and HI2221-02 (230V) are supplied with HI1131P pH electrode,
Data can be transferred to a PC with a USB Ordering HI7662 temperature probe, HI76404N electrode holder, HI70004 pH 4.01 buffer
cable and HI92000 software (both sold Information solution sachet, HI70007 pH 7.01 buffer solution sachet, HI7082S electrolyte solution,
HI700661 cleaning solution sachet, 12 VDC adapter, and instructions.
separately).
2.48 | www.hannainst.com pH and ORP electrodes begin on page 2.122; pH and ORP solutions begin on page 2.142
HI2210 · HI2211
pH Benchtop 2
Meters
• Automatic temperature compensation (ATC)
• Two-point calibration
• Simple to operate
• Reading stability indicator
• Measurement recall
pH
The calibration process is guided step-by-
step through graphics shown on the LCD.
benchtop
Temperature automatic (with HI7662 probe) or manual
Compensation from -20.0 to 120.0°C
Dimensions / Weight 235 x 222 x 109 mm (9.2 x 8.7 x 4.3”); 1.3 Kg (2.9 lbs)
HI2210-01 (115V), HI2210-02 (230V), HI2211-01 (115V) and HI2211-02 (230V) are
supplied with HI1131B pH electrode, HI7662 temperature probe, HI76404N electrode
Ordering
holder, HI70004 pH 4.01 buffer solution sachet, HI70007 pH 7.01 buffer solution sachet,
Information HI7082 3.5M KCl electrolyte solution (30 mL), HI700601 cleaning solution sachet,
12 VDC adapter and instructions.
pH and ORP electrodes begin on page 2.122; pH and ORP solutions begin on page 2.142 www.hannainst.com | 2.49
HI2209 · HI22091
2 pH Benchtop
Meters
with Manual Temperature
Compensation and Analog Output
• Manual pH calibration
·· This simple to use feature provides the
ability to demonstrate the concept of
offset and slope. It can be calibrated
to any value within the measurement
ranges and is less expensive than
models with automatic calibration
• Manual temperature compensation (MTC)
·· MTC provides the ability to demonstrate
the effect of temperature on
pH
pH measurement. It is simple
to use and allows for different
temperature corrections based
on the sample being tested.
• Analog output (HI22091 only)
·· Allows a recording device to be
connected to the meter.
• mV range
·· These pH/mV meters can also measure
ORP (oxidation reduction potential) or
ion concentration (ISE) in the extended
mV range with optional electrodes.
• Large LCD
·· The new, larger LCD is bright
and easy to read.
• Built-in solution holders
·· These meters have solution holders
built into the casing. This convenient
feature saves space and prevents
solutions from tipping over
benchtop
mV Resolution 1 mV 1 mV
In order to achieve maximum accuracy, the
HI22091 and HI2209 feature manual pH Accuracy ±1 mV ±1 mV
calibration at one or two points. Manual HI1332B PEI body pH electrode with BNC connector
pH Electrode
calibration enables the user to select the and 1 m (3.3’) cable (included)
instrument’s calibration points closer to the Input Impedance 10¹² Ohm 10¹² Ohm
desired range of measurement, making them
0 to 5 V according with: 0 to
ideal for applications that require custom Additional Analog Output — 14 pH or -1999 to +1999 mV,
calibration points. (In some applications, Specifications
temperature: always 0
a standard calibration curve such as
Power Supply 12 VDC adapter (included)
pH 7 or pH 4 is too far from the value of the
Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing
sample to achieve the highest accuracy.
Dimensions / Weight 235 x 222 x 109 mm (9.2 x 8.7 x 4.3”) / 1.3 kg (2.9 lbs.)
Ordering HI2209-01 (115V), HI2209-02 (230V), HI22091-01 (115V) and HI22091-02 (230V) are
Information supplied with HI1332B pH electrode, 12 VDC adapter and instruction manual.
2.50 | www.hannainst.com pH and ORP electrodes begin on page 2.122; pH and ORP solutions begin on page 2.142
HI208
Educational 2
pH Meter
• Simple User Interface
·· Operation is simple with limited
features that only require the use of
a couple of buttons and readings are
easy to view on the dual-level display.
• Built-in Stir Bar
·· Integrated 500 rpm magnetic stirrer.
• One or Two-Point Calibration
·· Automatic calibration can be performed
at 1 or 2 points with a choice of two
sets of preprogrammed buffers (pH
4.01, 7.01, 10.01 or 4.01, 6.86, 9.18).
pH
• HI1291D pH Electrode
·· The HI208 is supplied with the
HI1291D PEI body, single junction,
refillable pH electrode with an internal
temperature sensor and DIN connector.
• Temperature Compensation
·· The HI208 offers automatic
temperature compensation of
pH measurements over a wide
range from -5.0 to 105.0°C.
• Stability Indicator
·· The HI208 features a stability indicator.
A clock icon appears on the display
when there is instability in the reading.
The clock icon disappears once the
reading has stabilized. At that time a
reading should be taken or stored.
benchtop
Operation is simplified with automatic pH
Resolution 0.01 pH calibration and automatic temperature
Accuracy ±0.02 pH compensation. This meter also features a
pH*
automatic, one or two-point with two sets of memorized buffer
built-in 500 rpm magnetic stirrer, extended pH
Calibration
values (pH 4.01, 7.01, 10.01 or 4.01, 6.86, 9.18) range, dual-level LCD with icons for stability
and buffer recognition, and temperature
Temperature
automatic display in either Celsius or Fahrenheit.
Compensation
Additional Power Supply 12 VDC adapter or 9V battery The compact design of the HI208, makes it
Specifications
ideal for educational use by reducing clutter
Battery Life approximately 200 hours without stirrer and utilizing a minimal amount of space on
Environment 0 to 50°C (32 to 122°F); RH max 95% the desktop. The option to switch to battery
Dimensions / Weight 192 x 104 x 134 mm (7.6 x 4.1 x 5.3”) / 420 g (14.8 oz.) power also allows the meter to be taken
HI208-01 (115V) and HI208-02 (230V) are supplied with HI1291D pH electrode,
outside the classroom for field studies.
Ordering pH electrode holder and plastic beaker, rubber O-ring, magnetic stir bar, pH 4.01 buffer
Information solution sachet, pH 7.01 buffer solution sachet, electrode cleaning solution sachet
for agriculture, 12 VDC adapter, battery and instructions.
2 Professional
Waterproof Meter
pH/ORP
• Waterproof
·· IP67 rated waterproof,
rugged enclosure
• CAL Check™
·· Alerts users to problems during
calibration including dirty/broken
electrode, contaminated buffer
and overall probe condition
• Automatic or manual
temperature compensation
·· pH sensors incorporate a built-
pH
in temperature sensor
• Calibration
·· Up to a five-point calibration
with seven standard buffers and
five custom buffers available
• Approximately 200 hour battery life
·· Powered by (4) 1.5V AA batteries
• Clear display
·· Dot matrix display with
multifunction virtual keys
• AutoHold
·· Automatically holds the first
stable reading on the display
• Calibration timeout
·· Alerts when calibration is due
at a specified interval
• Connectivity
·· PC connectivity via opto-isolated
micro-USB with HI92000 software
portable
• GLP
·· GLP data provides data from
previous calibration to ensure Good
Laboratory Practices are met
• Intuitive keypad
·· Most of the available options
such as GLP information, help,
range, calibration and backlight
have a dedicated button
• Supplied complete
·· Each meter is supplied complete
with sensor, calibration solution,
beakers, PC software and connection
cable, instruction manual, quick
start guide and batteries in a
rugged, custom carrying case.
2.52 | www.hannainst.com
Enhanced Calibration
An “out of calibration range” warning can be 2
engaged to keep the user informed of the
current calibration and help to avoid performing
measurements that are out of range.
pH
and alphanumeric characters. The meter also
waterproof casing and can withstand Hanna’s CAL Check maintains a history of past features two virtual soft keys that navigate
immersion in water at a depth of 1 m for up calibrations and monitors the pH electrode the user through the configuration of each
to 30 minutes. The probe features an IP68 and buffers during subsequent calibrations parameter, meter setup, and logging of data.
rating for continuous immersion in water. The interface is intuitive for any user’s level
for any signs of wide variances due to a
of experience.
dirty or broken electrode or contaminated
pH buffers. During calibration, users are
alerted to problems should they occur. After
calibration, the electrode’s overall condition
is displayed as a percentage.
portable
GLP Dedicated Help Key
Quick Connect Probe
Contextual help is always available through a
The HI98190 features the HI12963 titanium Comprehensive GLP functions are directly
dedicated “HELP” key. Clear tutorial messages
bodied pH/temperature electrode with a quick accessible by pressing the GLP key. Calibration and directions are available on-screen to
connect DIN connector to make attaching and quickly and easily guide users through
data, including date, time and calibration
removing the probe simple and easy. setup and calibration. The help information
values are stored for retrieval at a later time.
displayed is relative to the setting/option
being viewed.
www.hannainst.com | 2.53
Calibration Error Messages
2 Calibration is successfully performed if the
reading is within certain limits.
PC Connectivity
Logged data can be transferred to a Windows
Wrong Buffer — The pH reading is not within
compatible PC with the included HI920015
range of the selected buffer.
micro USB cable and HI92000 software.
pH
2.54 | www.hannainst.com
Calibrate right in the case with
custom beaker holders 2
Our custom carrying case features beaker
holders for calibration out in the field.
pH
Specifications HI98190
Range -2.0 to 20.0 pH; -2.00 to 20.00 pH; -2.000 to 20.000 pH
portable
Temperature Compensation automatic or manual from -20.0 to 120.0°C (-4.0 to 248.0°F)
Range ±2000 mV
Resolution 0.1 mV
mV*
Accuracy ±0.2 mV
pH Probe HI12963 titanium body, pH electrode with internal temperature sensor, quick DIN connector and 1 m (3.3’ cable)
PC Connection opto-isolated USB with HI92000 software and micro USB cable
Additional
Input Impedance 10¹² Ω
Specifications
Battery Type / Life 1.5V AA batteries (4) / approximately 200 hours of continuous use without backlight (50 hours with backlight)
Dimensions / Weight 185 x 93 x 35.2 mm (7.3 x 3.6 x 1.4”) / 400 g (14.2 oz.)
HI98190 is supplied with HI12963 pH electrode, HI7004M pH 4.01 buffer solution (230 mL), HI7007M pH 7.01 buffer solution (230 mL), electrode
Ordering
cleaning solution sachet (2), 100 mL plastic beaker (2), HI92000 PC software, HI920015 micro USB cable, 1.5V AA batteries (4), quick start guide, quality
Information certificate and instruction manual in an HI720190 rugged carrying case with custom insert.
2 pH / Temperature
Meter for Food
HI98161 is a professional portable pH and
temperature meter with a probe designed
specifically for pH measurement in the Food
sector.
• Waterproof
·· IP67 rated waterproof,
rugged enclosure
• CAL Check™
·· Alerts users to problems during
calibration including dirty/broken
electrode, contaminated buffer
and overall probe condition
pH
• Automatic or manual
temperature compensation
·· pH sensors incorporate a built-
in temperature sensor
• Calibration
·· Up to a five-point calibration
with seven standard buffers
and five custom buffers
• Approximately 200 hour battery life
·· Powered by (4) 1.5V AA batteries
• Clear display
·· Dot matrix display with
multifunction virtual keys
• Auto hold
·· Automatically holds the first
stable reading on the display
• Calibration timeout
·· Alerts when calibration is due
at a specified interval
portable
• Connectivity
·· PC connectivity via opto-isolated
micro-USB with HI92000 software
• GLP
·· GLP data provides data from
previous calibration to ensure Good
Laboratory Practices are met
• Intuitive keypad
·· Important and often used functions
such as GLP information, help,
range, calibration and backlight
have a dedicated button
• Supplied complete
·· Each meter is supplied complete
with sensor, calibration and cleaning
solutions, beakers, PC software and
connection cable, instruction manual,
quick start guide and batteries in
a rugged, custom carrying case
2.56 | www.hannainst.com
Foodcare pH Meter 2
designed for food professionals
Hanna food quality pH meters are rugged and portable with the performance and features of a benchtop. Five models are available
in this series to measure food, milk, meat, yogurt and cheese. Each model is supplied with an application specific electrode
and cleaning solutions. These waterproof meters comply to IP67 standards and can be easily operated with one hand.
pH
Backlit Graphic LCD Display GLP
pH Calibration
These meters feature a backlit graphic LCD Comprehensive GLP functions are directly
with on-screen help. The graphic display Choose from seven standard pH buffers
accessible by pressing the GLP key.
allows for the use of virtual keys to provide and five custom values to obtain up to five Calibration data, including date, time and
for an intuitive user interface. point calibration and achieve high precision calibration values are stored with logged data
readings with a 0.001 pH resolution and a pH for retrieval at a later time.
Waterproof Protection accuracy of ±0.002.
portable
the bracketed range.
Data Logging
The log-on-demand feature allows users
to store up to 200 samples that can be later
transferred to a PC with the HI920015 USB
cable and HI92000 software.
Automatic Temperature
Compensation
CAL Check™ pH sensors incorporate a built-in temperature
sensor in the tip of the electrode for a fast and
Quick Connect Probe Hanna’s CAL Check maintains a history of past
accurate temperature compensated value.
Each meter features an application specific calibrations and monitors the pH electrode
pH/temperature probe with a quick connect and buffers during subsequent calibrations
Intuitive Keypad
DIN connector to make attaching and for any signs of wide variances due to a
removing the probe simple and easy. dirty or broken electrode or contaminated The fitted rubber keypad has dedicated keys
for many important and often used functions.
pH buffers. During calibration, users are
These meters also feature two virtual soft
Calibration Timeout alerted to problems should they occur. After keys that navigate the user through setup
Alerts when calibration is due at a specified calibration, the electrode’s overall condition and logging of data. The interface is intuitive
interval. is displayed as a percentage. for any user’s level of experience.
www.hannainst.com | 2.57
Long Battery Life
2 The display of the meter has a battery icon
indicator to show the remaining power.
The meter uses four 1.5V AA batteries that
provide up to 200 hours of battery life.
Specifications HI98161
Range -2.0 to 20.0 pH; -2.00 to 20.00 pH; -2.000 to 20.000 pH
Range ±2000 mV
Resolution 0.1 mV
mV
Accuracy ±0.2 mV
pH Probe FC2023 PVDF body, pH electrode with internal temperature sensor, quick DIN connector and 1 m (3.3’ cable)
PC Connection opto-isolated USB with HI92000 software and micro USB cable
Additional
Input Impedance 10¹² Ω
Specifications
Battery Type / Life 1.5V AA batteries (4) / approximately 200 hours of continuous use without backlight (50 hours with backlight)
Dimensions / Weight 185 x 93 x 35.2 mm (7.3 x 3.6 x 1.4”) / 400 g (14.2 oz.)
HI98161 is supplied with FC2023 pH electrode, HI7004M pH 4.01 buffer solution (230 mL), HI7007M pH 7.01 buffer solution (230 mL), HI700641 electrode
Ordering
cleaning solution sachet for dairy deposits (2), 100 mL plastic beaker (2), HI92000 PC software, HI920015 micro USB cable, 1.5V AA batteries (4), quick start
Information guide, quality certificate and instruction manual in a rugged carrying case with custom insert.
2.58 | www.hannainst.com pH solutions begin on page 2.142; electrode cleaning solutions begin on page 2.156
FC2023
Application Importance
pH / Temperature One of the most common measurements
2
Probe for Food of food products is pH because of how it
affects food characteristics such as shelf
stability, texture, and flavor. Foods are
When measuring pH, food products can pose a number
generally broken into two groups based on
of challenges. Samples can vary in consistency from
their pH value. These groups include acid
solid, semi-solid to a slurry with a high content of
foods which have a naturally low pH of 4.6 or
solids. These sample types can coat the sensitive glass
below and low-acid foods that have a finished
membrane surface and/or clog the reference junction.
equilibrium pH value greater than pH 4.6
Designed specifically for measuring pH in food, the
and a water activity greater than 0.85. The
FC2023 has a conic tip shape for easy penetration,
low-acid foods can be pH adjusted with the
an open junction to resist clogging, and a PVDF food
addition of an acid to lower the final pH and
grade plastic body that can be cleaned with sodium
become an acidified food.
hypochlorite. The FC2023 is an ideal general purpose
pH electrode for use in food manufacturing. In food processing, some products require
the measurement of pH to meet industry
PVDF body regulations to ensure the quality and safety
pH
Polyvinylidene fluoride (PVDF) is a food grade plastic of goods. A lower pH will help in preventing
that is resistant to most chemicals and solvents, unwanted bacteria from growing thus
including sodium hypochlorite. It has high abrasion extending the shelf life of a product. While
resistance, mechanical strength and resistance to food safety is a crucial consideration,
ultraviolet and nuclear radiation. PVDF is also resistant understanding the pH of a food product can
to fungal growth. also help to achieve consistent flavors and
textures. Through fermentation and other
Low temperature glass biological processes, many foodstuffs only
achieve their desired qualities at particular pH
The FC2023 electrode uses Low Temperature (LT) values or ranges. pH is an essential parameter
glass for the sensing bulb. The LT glass tip is a lower
that requires close observation throughout
resistance glass formulation. As the temperature of
food production to provide the best possible
the sensing glass decreases, the resistance of the LT
glass will increase approaching that of standard glass product.
at ambient temperatures. The FC2023 is suitable to
use with samples that measure from 0 to 50°C.
portable
laboratory pH electrodes. The open junction design of
the FC2023 resists clogging and continues to provide
accurate, stable readings.
Specifications FC2023
Viscolene electrolyte pre-amplified
Description pH/temperature
The viscolene electrolyte offers a hard gel interface probe
between the inner electrode components and the
Reference single, Ag/AgCl
sample being measured. The electrolyte is silver-free
for use in food products and is maintenance-free. Junction open
Electrolyte viscolene
conic (dia: 6 x 10
Tip /Shape
Built-in temperature sensor mm)
www.hannainst.com | 2.59
HI98162
2 pH / Temperature
Meter for Milk
HI98162 is a professional portable pH and
temperature meter with a probe designed
specifically for pH measurement in milk.
• Waterproof
·· IP67 rated waterproof,
rugged enclosure
• CAL Check™
·· Alerts users to problems during
calibration including dirty/broken
electrode, contaminated buffer
and overall probe condition
• Automatic or manual
pH
temperature compensation
·· pH sensors incorporate a built-
in temperature sensor
• Calibration
·· Up to a five-point calibration
with seven standard buffers
and five custom buffers
• Approximately 200 hour battery life
·· Powered by (4) 1.5V AA batteries
• Clear display
·· Dot matrix display with
multifunction virtual keys
• Auto hold
·· Automatically holds the first
stable reading on the display
• Calibration timeout
·· Alerts when calibration is due
at a specified interval
• Connectivity
portable
2.60 | www.hannainst.com
Milk pH Meter 2
designed for food professionals
Hanna food quality pH meters are rugged and portable with the performance and features of a benchtop. Five models are available
in this series to measure food, milk, meat, yogurt and cheese. Each model is supplied with an application specific electrode
and cleaning solutions. These waterproof meters comply to IP67 standards and can be easily operated with one hand.
pH
Backlit Graphic LCD Display GLP
pH Calibration
These meters feature a backlit graphic LCD Comprehensive GLP functions are directly
with on-screen help. The graphic display Choose from seven standard pH buffers
accessible by pressing the GLP key.
allows for the use of virtual keys to provide and five custom values to obtain up to five Calibration data, including date, time and
for an intuitive user interface. point calibration and achieve high precision calibration values are stored with logged data
readings with a 0.001 pH resolution and a pH for retrieval at a later time.
Waterproof Protection accuracy of ±0.002.
portable
the bracketed range.
Data Logging
The log-on-demand feature allows users
to store up to 200 samples that can be later
transferred to a PC with the HI920015 USB
cable and HI92000 software.
Automatic Temperature
Compensation
CAL Check™ pH sensors incorporate a built-in temperature
sensor in the tip of the electrode for a fast and
Quick Connect Probe Hanna’s CAL Check maintains a history of past
accurate temperature compensated value.
Each meter features an application specific calibrations and monitors the pH electrode
pH/temperature probe with a quick connect and buffers during subsequent calibrations
Intuitive Keypad
DIN connector to make attaching and for any signs of wide variances due to a
removing the probe simple and easy. dirty or broken electrode or contaminated The fitted rubber keypad has dedicated keys
for many important and often used functions.
pH buffers. During calibration, users are
These meters also feature two virtual soft
Calibration Timeout alerted to problems should they occur. After keys that navigate the user through setup
Alerts when calibration is due at a specified calibration, the electrode’s overall condition and logging of data. The interface is intuitive
interval. is displayed as a percentage. for any user’s level of experience.
www.hannainst.com | 2.61
Long Battery Life
2 The display of the meter has a battery icon
indicator to show the remaining power.
The meter uses four 1.5V AA batteries that
provide up to 200 hours of battery life.
Specifications HI98162
Range -2.0 to 20.0 pH; -2.00 to 20.00 pH; -2.000 to 20.000 pH
Range ±2000 mV
Resolution 0.1 mV
mV
Accuracy ±0.2 mV
pH Probe FC1013 PVDF body, pH electrode with internal temperature sensor, quick DIN connector and 1 m (3.3’ cable)
PC Connection opto-isolated USB with HI92000 software and micro USB cable
Additional
Input Impedance 10¹² Ω
Specifications
Battery Type / Life 1.5V AA batteries (4) / approximately 200 hours of continuous use without backlight (50 hours with backlight)
Dimensions / Weight 185 x 93 x 35.2 mm (7.3 x 3.6 x 1.4”) / 400 g (14.2 oz.)
HI98162 is supplied with FC1013 pH electrode, HI7004M pH 4.01 buffer solution (230 mL), HI7007M pH 7.01 buffer solution (230 mL), HI700640 electrode
Ordering
cleaning solution sachet for milk deposits (2), 100 mL plastic beaker (2), HI92000 PC software, HI920015 micro USB cable, 1.5V AA batteries (4), quick start
Information guide, quality certificate and instruction manual in a rugged carrying case with custom insert.
2.62 | www.hannainst.com pH solutions begin on page 2.142; electrode cleaning solutions begin on page 2.156
FC1013
Application Importance
pH / Temperature The measurement of pH in milk is important in
2
Probe for Milk testing for impurities, spoilage, and signs of
mastitis infection. While there are a number
The FC1013 pH electrode has a built-in of factors that affect the composition of
temperature sensor for simultaneous milk, pH measurements can help producers
temperature compensated pH and understand what might be causing certain
temperature readings, and also contains an compositional changes. pH measurements
integral pH sensor preamplifier to provide are commonly performed at various points in
measurements impervious to noise and a milk processing plant.
electrical interferences.
Fresh milk has a pH value of 6.7. When the pH
FC1013 electrode is designed to prevent value of the milk falls below pH 6.7, it typically
the typical problems of clogging in viscous indicates spoilage by bacterial degradation.
and proteinaceous liquids ensuring a fast Bacteria from the family of Lactobacillaceae
response and stable reading. are lactic acid bacteria (LAB) responsible for
the breakdown of the lactose in milk to form
lactic acid. Eventually when the milk reaches
PVDF body
pH
an acidic enough pH, coagulation or curdling
The FC1013 is composed of food grade PVDF will occur along with the characteristic smell
plastic. This material is highly durable and and taste of “sour” milk.
chemically resistant.
Milk with pH values higher than pH 6.7
potentially indicate that the milk may have
General purpose glass
come from cows infected with mastitis.
The FC1013 uses general purpose (GP) glass. Mastitis is an ever-present challenge with
The formulation allows for fast response over dairy milking cows. When infected, the
a wide range of temperatures. The FC1013 is cow's immune system releases histamine
suitable to use with samples that measure and other compounds in response to the
from 0 to 80°C. infection. There is a resulting increase in
permeability of endothelial and epithelial cell
Refillable electrolyte layers, allowing blood components to pass
through a paracellular pathway. Since blood
The silver-free electrolyte ensures no silver
plasma is slightly alkaline, the resulting pH
precipitate can clog the junction. An easy
of milk will be higher than normal. Typically
to use fill cap allows for quick refilling of
milk producers can perform a somatic cell
electrolyte solution to maintain adequate
count to detect a mastitis infection, but a pH
head pressure.
measurement offers a quick way to screen for
infection.
Single ceramic junction
portable
A porous ceramic frit allows the silver-free Understanding the pH of raw milk can also
electrolyte to flow slowly into solution, help producers optimize their processing
providing accurate readings for aqueous techniques. For example, in operations that
samples. use Ultra High Temperature (UHT) processing,
even small variations from pH 6.7 can affect
the time required for pasteurization and the
Spheric tip shape Specifications FC1013
stability of the milk after treatment.
The shape of the sensing membrane provides pre-amplified pH/
Description
temperature probe
a large surface area for contact with milk
samples. The highly durable construction Reference double, Ag/AgCl
www.hannainst.com | 2.63
HI98163
2 pH / Temperature
Meter for Meat
HI98163 is a professional portable pH and
temperature meter with a probe designed
specifically for pH measurement in meat.
• Waterproof
·· IP67 rated waterproof,
rugged enclosure
• CAL Check™
·· Alerts users to problems during
calibration including dirty/broken
electrode, contaminated buffer
and overall probe condition
• Automatic or manual
pH
temperature compensation
·· pH sensors incorporate a built-
in temperature sensor
• Calibration
·· Up to a five-point calibration
with seven standard buffers
and five custom buffers
• Approximately 200 hour battery life
·· Powered by (4) 1.5V AA batteries
• Clear display
·· Dot matrix display with
multifunction virtual keys
• Auto hold
·· Automatically holds the first
stable reading on the display
• Calibration timeout
·· Alerts when calibration is due
at a specified interval
• Connectivity
portable
2.64 | www.hannainst.com
Meat pH Meter 2
designed for food professionals
Hanna food quality pH meters are rugged and portable with the performance and features of a benchtop. Five models are available
in this series to measure food, milk, meat, yogurt and cheese. Each model is supplied with an application specific electrode
and cleaning solutions. These waterproof meters comply to IP67 standards and can be easily operated with one hand.
pH
Backlit Graphic LCD Display GLP
pH Calibration
These meters feature a backlit graphic LCD Comprehensive GLP functions are directly
with on-screen help. The graphic display Choose from seven standard pH buffers
accessible by pressing the GLP key.
allows for the use of virtual keys to provide and five custom values to obtain up to five Calibration data, including date, time and
for an intuitive user interface. point calibration and achieve high precision calibration values are stored with logged data
readings with a 0.001 pH resolution and a pH for retrieval at a later time.
Waterproof Protection accuracy of ±0.002.
portable
the bracketed range.
Data Logging
The log-on-demand feature allows users
to store up to 200 samples that can be later
transferred to a PC with the HI920015 USB
cable and HI92000 software.
Automatic Temperature
Compensation
CAL Check™ pH sensors incorporate a built-in temperature
sensor in the tip of the electrode for a fast and
Quick Connect Probe Hanna’s CAL Check maintains a history of past
accurate temperature compensated value.
Each meter features an application specific calibrations and monitors the pH electrode
pH/temperature probe with a quick connect and buffers during subsequent calibrations
Intuitive Keypad
DIN connector to make attaching and for any signs of wide variances due to a
removing the probe simple and easy. dirty or broken electrode or contaminated The fitted rubber keypad has dedicated keys
for many important and often used functions.
pH buffers. During calibration, users are
These meters also feature two virtual soft
Calibration Timeout alerted to problems should they occur. After keys that navigate the user through setup
Alerts when calibration is due at a specified calibration, the electrode’s overall condition and logging of data. The interface is intuitive
interval. is displayed as a percentage. for any user’s level of experience.
www.hannainst.com | 2.65
Long Battery Life
2 The display of the meter has a battery icon
indicator to show the remaining power.
The meter uses four 1.5V AA batteries that
provide up to 200 hours of battery life.
Specifications HI98163
Range -2.0 to 20.0 pH; -2.00 to 20.00 pH; -2.000 to 20.000 pH
Range ±2000 mV
Resolution 0.1 mV
mV
Accuracy ±0.2 mV
pH Probe FC2323 PVDF body, pH electrode with internal temperature sensor, quick DIN connector and 1 m (3.3’ cable)
PC Connection opto-isolated USB with HI92000 software and micro USB cable
Additional
Input Impedance 10¹² Ω
Specifications
Battery Type / Life 1.5V AA batteries (4) / approximately 200 hours of continuous use without backlight (50 hours with backlight)
Dimensions / Weight 185 x 93 x 35.2 mm (7.3 x 3.6 x 1.4”) / 400 g (14.2 oz.)
HI98163 is supplied with FC2323 pH electrode, FC099 meat piercing stainless steel blade, HI7004M pH 4.01 buffer solution (230 mL), HI7007M pH 7.01 buffer
Ordering
solution (230 mL), HI700630 electrode acid cleaning solution sachet for meat grease and fat deposits (2), 100 mL plastic beaker (2), HI92000 PC software,
Information HI920015 micro USB cable, 1.5V AA batteries (4), quick start guide, quality certificate and instruction manual in a rugged carrying case with custom insert.
2.66 | www.hannainst.com pH solutions begin on page 2.142; electrode cleaning solutions begin on page 2.156
FC2323
Application Importance
pH / Temperature In the meat production industry, the
2
Probe for Meat monitoring of pH is considered to be of
the utmost importance due to its effect
on the meat’s quality factors including
The FC2323 probe has been specially designed with a
water binding capacity and shelf life. Upon
stainless steel blade tip for meat penetration.
slaughter, biochemical processes begin to
break down the meat. Glycolysis begins post-
PVDF body mortem, converting glycogen to lactic acid,
Polyvinylidene fluoride (PVDF) is a food grade plastic reducing the pH of the carcass. Depending
that is resistant to most chemicals and solvents, on a number of factors such as type of animal
including sodium hypochlorite. It has high abrasion and even breed, this decrease in pH can take
resistance, mechanical strength and resistance to anywhere from a single hour to many. It is vital
ultraviolet and nuclear radiation. PVDF is also resistant to monitor pH during this phase as once the
to fungal growth. lowest pH value is reached, the pH will begin
to slowly rise, indicating that decomposition
has begun.
Viscolene electrolyte
pH
The viscolene electrolyte offers a hard gel interface The pH value of meat influences its’ water
between the inner electrode components and the binding capacity which directly impacts
sample being measured. The electrolyte is silver-free consumer qualities such as tenderness
for use in food products and is maintenance-free. and color. Lower pH values result in a lower
water-binding capacity and lighter colors.
Stainless steel piercing blade Factors such as these can be important when
considering how to efficiently produce meat
The FC099 (35mm; 1.38”) stainless steel blade can
products. For example, when producing dry
be attached to the probe for easy meat penetration.
sausages the meat must have a low water
Piercing into the meat will allow for the pH glass and
binding capacity so that it can dry evenly.
reference junction to be in contact with the sample for
a direct pH measurement without extensive sample Depending on the type of the final product
preparation. and the steps required to get there, pH values
will vary throughout the meat processing
Open junction reference industry. It is imperative, regardless of the
final product, that pH be maintained at a low
Clogging of the reference junction is a common
value to prevent bacterial spoilage and comply
challenge faced by food producers that measure pH
with food safety regulations. By monitoring
in semi-solid products such as meat. The solids can
pH values throughout the meat production
easily clog the ceramic junction used with standard
process, you can ensure the creation of
laboratory pH electrodes. The open junction design of
consistent and safe meat products.
the FC2323 resists clogging and continues to provide
portable
accurate, stable readings.
Amplifier yes
This design along with a piercing blade allows for
the easy penetration into semisolids for the direct Body Material PVDF
www.hannainst.com | 2.67
HI98164
2 pH / Temperature
Meter for Yogurt
HI98164 is a professional portable pH and
temperature meter with a probe designed
specifically for pH measurement in yogurt.
• Waterproof
·· IP67 rated waterproof, rugged enclosure
• CAL Check™
·· Alerts users to problems during
calibration including dirty/broken
electrode, contaminated buffer
and overall probe condition
• Automatic or manual
temperature compensation
pH
2.68 | www.hannainst.com
Yogurt pH Meter 2
designed for food professionals
Hanna food quality pH meters are rugged and portable with the performance and features of a benchtop. Five models are available
in this series to measure food, milk, meat, yogurt and cheese. Each model is supplied with an application specific electrode
and cleaning solutions. These waterproof meters comply to IP67 standards and can be easily operated with one hand.
pH
Backlit Graphic LCD Display GLP
pH Calibration
These meters feature a backlit graphic LCD Comprehensive GLP functions are directly
with on-screen help. The graphic display Choose from seven standard pH buffers
accessible by pressing the GLP key.
allows for the use of virtual keys to provide and five custom values to obtain up to five Calibration data, including date, time and
for an intuitive user interface. point calibration and achieve high precision calibration values are stored with logged data
readings with a 0.001 pH resolution and a pH for retrieval at a later time.
Waterproof Protection accuracy of ±0.002.
portable
the bracketed range.
Data Logging
The log-on-demand feature allows users
to store up to 200 samples that can be later
transferred to a PC with the HI920015 USB
cable and HI92000 software.
Automatic Temperature
Compensation
CAL Check™ pH sensors incorporate a built-in temperature
sensor in the tip of the electrode for a fast and
Quick Connect Probe Hanna’s CAL Check maintains a history of past
accurate temperature compensated value.
Each meter features an application specific calibrations and monitors the pH electrode
pH/temperature probe with a quick connect and buffers during subsequent calibrations
Intuitive Keypad
DIN connector to make attaching and for any signs of wide variances due to a
removing the probe simple and easy. dirty or broken electrode or contaminated The fitted rubber keypad has dedicated keys
for many important and often used functions.
pH buffers. During calibration, users are
These meters also feature two virtual soft
Calibration Timeout alerted to problems should they occur. After keys that navigate the user through setup
Alerts when calibration is due at a specified calibration, the electrode’s overall condition and logging of data. The interface is intuitive
interval. is displayed as a percentage. for any user’s level of experience.
www.hannainst.com | 2.69
Long Battery Life
2 The display of the meter has a battery icon
indicator to show the remaining power.
The meter uses four 1.5V AA batteries that
provide up to 200 hours of battery life.
Specifications HI98164
Range -2.0 to 20.0 pH; -2.00 to 20.00 pH; -2.000 to 20.000 pH
Range ±2000 mV
Resolution 0.1 mV
mV
Accuracy ±0.2 mV
pH Probe FC2133 glass body, pH electrode with internal temperature sensor, quick DIN connector and 1 m (3.3’ cable)
PC Connection opto-isolated USB with HI92000 software and micro USB cable
Additional
Input Impedance 10¹² Ω
Specifications
Battery Type / Life 1.5V AA batteries (4) / approximately 200 hours of continuous use without backlight (50 hours with backlight)
Dimensions / Weight 185 x 93 x 35.2 mm (7.3 x 3.6 x 1.4”) / 400 g (14.2 oz.)
HI98164 is supplied with FC2133 pH electrode, HI7004M pH 4.01 buffer solution (230 mL), HI7007M pH 7.01 buffer solution (230 mL), HI700643 electrode
Ordering
cleaning and disinfection solution sachet for yogurt products (2), 100 mL plastic beaker (2), HI92000 PC software, HI920015 micro USB cable, 1.5V AA
Information batteries (4), quick start guide, quality certificate and instruction manual in a rugged carrying case with custom insert.
2.70 | www.hannainst.com pH solutions begin on page 2.142; electrode cleaning solutions begin on page 2.156
FC2133
Application Importance
pH / Temperature Monitoring pH is crucial in producing
2
Probe for Yogurt consistent, quality yogurt. Yogurt is made
by the fermentation of milk with live
bacterial cultures. Following pasteurization
The FC2133 pH electrode is rugged and easy to
and compositional adjustment, milk is
clean with a conical tip and built-in temperature
homogenized for a consistent texture,
sensor. The open junction design consists of a
heated to the desired thickness, and
solid gel interface (viscolene) between the sample
cooled before inoculation. Most yogurt is
and internal Ag/AgCl reference. This interface not
inoculated with a starter culture consisting
only prevents silver from entering the sample,
of Lactobacillus bulgaricus and Streptococcus
but also makes it impermeable to clogging after
thermophilus. Once the live culture is added,
measurements in semi-solid or viscous samples.
the mixture of milk and bacteria is incubated,
FC2133 electrode is designed to prevent the
allowing for fermentation of lactose to lactic
typical problems of clogging in viscous liquids,
acid. As lactic acid is produced, there is a
ensuring a fast response and stable reading.
correlating drop in pH. Due to the more acidic
mixture, the casein protein in milk coagulates
Glass body and precipitates out, thickening the milk into
pH
The glass body of the FC2133 allows standards a yogurt-like texture.
and samples to more quickly reach thermal
equilibrium while also providing chemical Yogurt producers cease incubation once a
resistance. specific pH level is reached. Most producers
have a set point between pH 4.0 and 4.6
in which fermentation is stopped by rapid
Low temperature glass cooling. The amount of lactic acid present at
The FC2133 electrode uses Low Temperature this pH level is ideal for yogurt, giving it the
(LT) glass for the sensing bulb. The LT glass tip characteristic tartness, aiding in thickening,
is a lower resistance glass formulation. As the and acting as a preservative against
temperature of the sensing glass decreases, undesirable strains of bacteria.
the resistance of the LT glass will increase
approaching that of standard glass at ambient By verifying that fermentation continues
temperatures. The FC2133 is suitable to use with to a predetermined pH endpoint, yogurt
samples that measure from 0 to 50°C. producers can ensure their products remain
consistent in terms of flavor, aroma, and
texture. A deviation from the predetermined
Viscolene electrolyte
pH can lead to a reduced shelf life of yogurt
The viscolene electrolyte offers a hard gel or create a product that is too bitter or tart.
interface between the inner electrode Syneresis is the separation of liquid, in this
components and the sample being measured. case whey, from the milk solids; this can occur
The electrolyte is silver-free for use in yogurt and if fermentation is stopped too early or too
portable
is maintenance-free. late, resulting in yogurt that is respectively
too alkaline or too acidic. Consumers expect
Open junction reference yogurt to remain texturally consistent, so
ensuring fermentation is stopped at the
Clogging of the reference junction is a common
appropriate pH is vital to consumer perception.
challenge faced by yogurt producers as the Specifications FC2133
milk solids and proteins can easily build up on pre-amplified pH /
Description
the electrode. The open junction design of the temperature probe
FC2133 resists clogging and continues to provide Reference double, Ag/AgCl
accurate, stable readings.
Junction open
Electrolyte viscolene
Conic tip shape
Max Pressure 0.1 bar
This design allows for penetration into semisolids
Range pH: 0 to 12
and emulsions for the direct measurement of pH
in yogurt products. Recommended
Operating 0 to 50°C (32 to 122°F)
Temperature
Built-in temperature sensor Tip /Shape conic
A thermistor temperature sensor is in the tip of Temperature Sensor yes
the indicating pH electrode. A temperature sensor
Amplifier yes
should be as close as possible to the indicating
Body Material glass
pH bulb in order to compensate for variations in
temperature. Cable coaxial; 1 m (3.3’)
www.hannainst.com | 2.71
HI98165
2 pH / Temperature
Meter for Cheese
HI98165 is a professional portable pH and
temperature meter with a probe designed
specifically for pH measurement in cheese.
• Waterproof
·· IP67 rated waterproof,
rugged enclosure
• CAL Check™
·· Alerts users to problems during
calibration including dirty/broken
electrode, contaminated buffer
and overall probe condition
• Automatic or manual
pH
temperature compensation
·· pH sensors incorporate a built-
in temperature sensor
• Calibration
·· Up to a five-point calibration
with seven standard buffers
and five custom buffers
• Approximately 200 hour battery life
·· Powered by (4) 1.5V AA batteries
• Clear display
·· Dot matrix display with
multifunction virtual keys
• Auto hold
·· Automatically holds the first
stable reading on the display
• Calibration timeout
·· Alerts when calibration is due
at a specified interval
• Connectivity
portable
2.72 | www.hannainst.com
2
Cheese pH Meter
designed for food professionals
Hanna food quality pH meters are rugged and portable with the performance and features of a benchtop. Five models are available
in this series to measure food, milk, meat, yogurt and cheese. Each model is supplied with an application specific electrode
and cleaning solutions. These waterproof meters comply to IP67 standards and can be easily operated with one hand.
pH
Backlit Graphic LCD Display GLP
pH Calibration
These meters feature a backlit graphic LCD Comprehensive GLP functions are directly
with on-screen help. The graphic display Choose from seven standard pH buffers
accessible by pressing the GLP key.
allows for the use of virtual keys to provide and five custom values to obtain up to five Calibration data, including date, time and
for an intuitive user interface. point calibration and achieve high precision calibration values are stored with logged data
readings with a 0.001 pH resolution and a pH for retrieval at a later time.
Waterproof Protection accuracy of ±0.002.
portable
the bracketed range.
Data Logging
The log-on-demand feature allows users
to store up to 200 samples that can be later
transferred to a PC with the HI920015 USB
cable and HI92000 software.
Automatic Temperature
Compensation
CAL Check™ pH sensors incorporate a built-in temperature
sensor in the tip of the electrode for a fast and
Quick Connect Probe Hanna’s CAL Check maintains a history of past
accurate temperature compensated value.
Each meter features an application specific calibrations and monitors the pH electrode
pH/temperature probe with a quick connect and buffers during subsequent calibrations
Intuitive Keypad
DIN connector to make attaching and for any signs of wide variances due to a
removing the probe simple and easy. dirty or broken electrode or contaminated The fitted rubber keypad has dedicated keys
for many important and often used functions.
pH buffers. During calibration, users are
These meters also feature two virtual soft
Calibration Timeout alerted to problems should they occur. After keys that navigate the user through setup
Alerts when calibration is due at a specified calibration, the electrode’s overall condition and logging of data. The interface is intuitive
interval. is displayed as a percentage. for any user’s level of experience.
www.hannainst.com | 2.73
Long Battery Life
2 The display of the meter has a battery icon
indicator to show the remaining power.
The meter uses four 1.5V AA batteries that
provide up to 200 hours of battery life.
Specifications HI98165
Range -2.0 to 20.0 pH; -2.00 to 20.00 pH; -2.000 to 20.000 pH
Resolution 0.1 pH; 0.01 pH; 0.001 pH
Accuracy ±0.1 pH; ±0.01 pH; ±0.002 pH
pH*
up to five-point calibration, seven standard buffers available (1.68, 4.01, 6.86, 7.01, 9.18, 10.01, 12.45)
portable
Calibration
and five custom buffers
FC2423 pre-amplified pH and temperature probe with stainless steel sheath, pH electrode with internal temperature sensor,
pH Probe
quick DIN connector and 1 m (3.3’ cable)
HI98165 is supplied with FC2423 pH electrode, HI7004M pH 4.01 buffer solution (230 mL), HI7007M pH 7.01 buffer solution (230 mL), HI700642 electrode
Ordering
cleaning solution sachet for cheese residues (2), 100 mL plastic beaker (2), HI92000 PC software, HI920015 micro USB cable, 1.5V AA batteries (4), quick
Information start guide, quality certificate and instruction manual in a rugged carrying case with custom insert.
2.74 | www.hannainst.com pH solutions begin on page 2.142; electrode cleaning solutions begin on page 2.156
FC2423
Application Importance
pH / Temperature pH is an essential measurement throughout the
2
Probe for Cheese entire cheesemaking process. From the initial
measurements of incoming milk to the final
measurements of ripened cheese, pH is the most
FC2423 electrode has a stainless steel
important parameter for cheese quality and
sheath and conical tip to ensure quick, easy
safety control.
measurements and fast response. FC2423
pH electrode features a built-in temperature Acidification of milk begins with the addition
sensor and is ideal for measurements in semi- of bacterial culture and rennet. The bacteria
solid samples such as cheeses. consume lactose and create lactic acid as a
byproduct of fermentation, lowering the pH of
Low temperature glass the milk. Once the milk reaches a particular pH, the
rennet is added. The enzymes in rennet help to
The FC2423 electrode uses Low Temperature
speed up curdling and create a firmer substance.
(LT) glass for the sensing bulb. The LT glass tip
For cheesemakers that dilute their rennet, the
is a lower resistance glass formulation. As the
pH of the dilution water is also critical; water that
temperature of the sensing glass decreases, is near pH 7 or higher can deactivate the rennet,
the resistance of the LT glass will increase
pH
causing problems with coagulation.
approaching that of standard glass at ambient
temperatures. The FC2423 is suitable to use Once the curds are cut, stirred, and cooked, the
with samples that measure from 0 to 50°C. liquid whey must be drained. The pH of whey at
draining directly affects the composition and
AISI 316 stainless steel body texture of the final cheese product. Whey that has
a relatively high pH contributes to higher levels of
The metal body offers durability in the calcium and phosphate and results in a stronger
production facility and can withstand curd. Typical pH levels at draining can vary
chloride concentrations that cause corrosion depending on the type of cheese; for example,
in other types of alloys. Swiss cheese is drained between pH 6.3 and 6.5
while Cheddar cheese is drained between pH 6.0
Viscolene electrolyte and 6.2.
The viscolene electrolyte offers a hard gel
The next stages of milling and salting are affected
interface between the inner electrode by pH as well. During milling, curds are cut into
components and the sample being measured. smaller pieces to prepare the cheese for salting.
The electrolyte is silver-free for use in cheese Curds with a lower pH at milling result in a harder
products and is maintenance-free. cheese. A low pH will also result in higher salt
absorption during the salting stage.
Built-in temperature sensor
When curds are pressed into a final, solid form,
A thermistor temperature sensor is in the tip
the pH directly affects how well the curds fuse
portable
of the indicating pH electrode. A temperature
together. If the pH is too high during pressing, the
sensor should be as close as possible to the curds will not bind together as well and the final
indicating pH bulb in order to compensate for cheese will have a more open texture.
variations in temperature.
During brining, the cheese soaks up salt from the
Specifications FC2423
Conic tip shape brine solution and loses excess moisture. The pH
pre-amplified pH / of the brine solution should be close to the pH
This design allows for penetration into solids, Description
temperature probe of the cheese, ensuring equilibrium of ions like
semi solids, and emulsions for the direct
Reference single, Ag/AgCl calcium and hydrogen. If there is an imbalance
measurement of pH in cheese products. during brining, the final product can have rind
Junction open
defects, discoloration, a weakened texture, and a
Electrolyte viscolene
shorter shelf life.
Max Pressure 0.1 bar
www.hannainst.com | 2.75
HI9126
2 Portable pH/mV
Meter
• CAL Check™
·· Alerts users of calibration status
• Backlight
·· Backlit, multi-level LCD display
• Battery Error Prevention System (BEPS)
·· Automatically shuts off meter
when battery is too low to
take accurate readings
• Battery indicator
·· Battery percentage
displayed on startup
• Help feature
pH
helps to minimize junction contamination for automatic, one or two-point with seven standard
pH*
Calibration buffers available (pH 1.68, 4.01, 6.86, 7.01, 9.18, 10.01,
consistently accurate results. The HI9126
12.45) and two custom buffers
can also measure ORP in the mV range using
Temperature automatic or manual from -20.0 to 120.0°C
an optional ORP probe. Compensation (-4.0 to 248.0°F)
Range ±699.9 mV; ±1999 mV
mV Resolution 0.1 mV; 1 mV
Accuracy ±0.2 mV; ±1 mV
Range -20.0 to 120.0°C; -4.0°F to 248.0°F
Temperature* Resolution 0.1°C; 0.1 °F
Accuracy ±0.4°C; ±0.8°F
HI1230B PEI body pH electrode with BNC connector
pH Electrode
and 1 m (3.3’) cable (included)
HI7662 stainless steel temperature probe
Temperature Probe
with 1 m (3.3’) cable (included)
Slope / Offset Calibration from 80 to 108% / ±1 pH
Additional
Input Impedance 10¹² Ohm
Specifications
1.5V (3) AAA / approximately 200 hours of continuous use
Battery Type / Life
without backlight (50 hours with backlight)
Auto-off after 20 minutes of non-use (can be disabled)
Environment 0 to 50°C (32 to 122°F); RH max 100%
Dimensions / Weight 185 x 72 x 36 mm (7.3 x 2.8 x 1.4”) / 300 g (10.6 oz.)
HI9126 is supplied with HI1230B pH electrode, HI7662 temperature probe,
Ordering HI70004 pH 4.01 buffer solution sachet, HI70007 pH 7.01 buffer sachet, HI700601
Information electrode cleaning solution sachet, 100 mL plastic beaker, 1.5V AAA batteries (3),
instructions and hard carrying case.
2.76 | www.hannainst.com pH and ORP electrodes begin on page 2.122; pH and ORP solutions begin on page 2.142
HI9124 · HI9125
Portable pH/mV 2
Meters
• Automatic Temperature
Compensation (ATC)
• Two-point calibration
• Waterproof casing
• Battery Error Prevention System (BEPS)
·· Automatically shuts off meter
when battery is too low to
take accurate readings
• Battery life indicator
·· Battery percentage
displayed on startup
pH
• Help feature
·· Tutorial messages displayed on LCD
portable
pH*
4.01, 6.86, 7.01, 9.18, 10.01) 4.01, 6.86, 7.01, 9.18, 10.01)
automatic or manual automatic or manual
Temperature from -20.0 to 120.0°C from -20.0 to 120.0°C
Compensation (-4.0 to 248.0°F) without (-4.0 to 248.0°F) without
temperature probe temperature probe
Range — ±699.9 mV; ±1999 mV
mV Resolution — 0.1 mV; 1 mV
Accuracy — ±0.2 mV; ±1 mV
-20.0 to 120.0°C -20.0 to 120.0°C
Range
(-4.0°F to 248.0°F) (-4.0°F to 248.0°F)
Temperature*
Resolution 0.1°C (0.1°F) 0.1°C (0.1°F)
Accuracy ±0.4°C (±0.8°F) ±0.4°C (±0.8°F)
HI1230B PEI body pH electrode with BNC connector
pH Electrode
and 1 m (3.3’) cable (included)
HI7662 stainless steel temperature probe
Temperature Probe
with 1 m (3.3’) cable (included)
Additional Slope / Offset Calibration from 80 to 108% / ±1 pH
Specifications
Input Impedance 10¹² Ohm
Both All Meters
Battery Type / Life 1.5V AAA (3) / approximately 200 hours of continuous use.
Auto-off auto-off after 20 minutes of non-use (can be disabled)
Environment 0 to 50°C (32 to 122°F); RH max 100%
Dimensions / Weight 185 x 72 x 36 mm (7.3 x 2.8 x 1.4”) / 300 g (10.6 oz.)
HI9124 and HI9125 are supplied with HI1230B pH electrode, HI7662 temperature
Ordering
probe, HI70004 pH 4.01 buffer solution sachet, HI70007 pH 7.01 buffer solution sachet,
Information 100 mL plastic beaker, batteries, instructions and hard carrying case.
pH and ORP electrodes begin on page 2.122; pH and ORP solutions begin on page 2.142 www.hannainst.com | 2.77
HI991001 · HI991002 · HI991003
2 pH/pH-mV/ORP and
Temperature Meters
• Sensor Check™
·· (HI991003) Allows users to check
the pH electrode status at any time
• Automatic Temperature
Compensation (ATC)
• Two-point calibration
·· Up to two points automatic calibration
• Battery Error Prevention System (BEPS)
·· Alerts the user of low battery power
that could adversely affect readings
• Waterproof
·· Compact, heavy-duty, and
pH
• Automatic Temperature
Compensation (ATC)
• Two-point calibration
• Battery Error Prevention System (BEPS)
·· Alerts the user of low battery power
that could adversely affect readings
• Waterproof
·· Compact, heavy-duty, and
waterproof protected casing
• Battery life indicator
·· Battery percentage
displayed on startup
pH
• Help feature
·· Tutorial messages displayed on LCD
Specifications HI99121
portable
Range -2.00 to 16.00 pH
• Soil preparation solution
Resolution 0.01 pH ·· For higher degrees of accuracy, or for
Accuracy ±0.02 pH stony ground where the electrode
pH*
one or two-point calibration, two sets of standard buffers may be damaged, use the included
Calibration
available (4.01, 7.01, 10.01 or NIST 4.01, 6.86, 9.18) HI7051M soil preparation solution
Temperature
automatic from -5.0 to 105.0°C (23 to 221°F)
Compensation
Additional Battery Type / Life 1.5V AAA (3) / approximately 1200 hours of continuous use
Specifications
Auto-off after 8 minutes of non-use
pH solutions begin on page 2.142; electrode cleaning solutions begin on page 2.156 www.hannainst.com | 2.79
HI99131
2 Portable pH Meter
for Plating Baths
• Automatic Temperature
Compensation (ATC)
• Two-point calibration
• Waterproof
·· Compact, heavy-duty, and
waterproof protected casing
• Battery Error Prevention System (BEPS)
·· Alerts the user of low battery power
that could adversely affect readings
• Battery life indicator
·· Battery percentage
displayed on startup
pH
• HELP feature
·· Tutorial messages displayed on LCD
Specifications HI99131
Range -2.00 to 16.00 pH
Resolution 0.01 pH
Accuracy ±0.02 pH
pH*
one or two-point calibration, two sets of standard buffers
Calibration
available (4.01, 7.01, 10.01 or NIST 4.01, 6.86, 9.18)
Temperature
automatic from -5.0 to 105.0°C (23 to 221°F)
Compensation
Additional Battery Type / Life 1.5V AAA (3) / approximately 1200 hours of continuous use
Specifications
Auto-off after 8 minutes of non-use
2.80 | www.hannainst.com pH solutions begin on page 2.142; electrode cleaning solutions begin on page 2.156
HI99141
Portable pH Meter 2
for Boiler and Cooling Towers
• Automatic Temperature
Compensation (ATC)
• Two-point calibration
• Battery Error Prevention System (BEPS)
·· Alerts the user of low battery power
that could adversely affect readings
• Waterproof
·· Compact, heavy-duty, and
waterproof protected casing
• Battery life indicator
·· Battery percentage
displayed on startup
pH
• Help feature
·· Tutorial messages displayed on LCD
portable
Specifications HI99141
Range -2.00 to 16.00 pH
Resolution 0.01 pH
Accuracy ±0.02 pH
pH*
one or two-point calibration, two sets of standard buffers
Calibration
available (4.01, 7.01, 10.01 or NIST 4.01, 6.86, 9.18)
Temperature
automatic from -5.0 to 105.0°C (23 to 221°F)
Compensation
Additional Battery Type / Life 1.5V AAA (3) / approximately 1200 hours of continuous use
Specifications
Auto-off after 8 minutes of non-use
pH solutions begin on page 2.142; electrode cleaning solutions begin on page 2.156 www.hannainst.com | 2.81
HI99171
2 Portable pH Meter
for Leather and Paper
• Automatic Temperature
Compensation (ATC)
• Two-point calibration
• Battery Error Prevention System (BEPS)
·· Alerts the user of low battery power
that could adversely affect readings
• Waterproof
·· Compact, heavy-duty, and
waterproof protected casing
• Battery life indicator
·· Battery percentage
displayed on startup
pH
• Help feature
·· Tutorial messages displayed on LCD
Specifications HI99171
portable
Resolution 0.01 pH
Accuracy ±0.02 pH
pH*
one or two-point calibration, two sets of standard buffers
Calibration
available (4.01, 7.01, 10.01 or NIST 4.01, 6.86, 9.18)
Temperature
automatic from -5.0 to 105.0°C (23 to 221°F)
Compensation
Additional Battery Type / Life 1.5V AAA (3) / approximately 1200 hours of continuous use
Specifications
Auto-off after 8 minutes of non-use
• Optional shockproof rubber boot Dimensions / Weight 152 x 58 x 30 mm (6.0 x 2.3 x 1.2”) / 205 g (7.2 oz.)
·· Specially designed to protect your HI99171 is supplied with HI1414D flat tipped pH and temperature probe, HI70004 pH
instrument from damage or impact Ordering 4.01 buffer solution sachet, HI70007 pH 7.01 buffer solution sachet, HI700680 electrode
HI710023 Orange Information cleaning solution for cellulose deposits sachets (2), HI70960 conductive electrolyte
solution for pH measurement (30 mL), batteries, instructions and hard carrying case.
HI710024 Blue
* Limits will be reduced to actual sensor limits
2.82 | www.hannainst.com pH solutions begin on page 2.142; electrode cleaning solutions begin on page 2.156
HI99181
Portable pH Meter 2
for Skin
• Automatic Temperature
Compensation (ATC)
• Two-point calibration
• Battery Error Prevention System (BEPS)
·· Alerts the user of low battery power
that could adversely affect readings
• Waterproof
·· Compact, heavy-duty, and
waterproof protected casing
• Battery life indicator
·· Battery percentage
displayed on startup
pH
• Help feature
·· Tutorial messages displayed on LCD
Specifications HI99181
portable
Range -2.00 to 16.00 pH
Resolution 0.01 pH
Accuracy ±0.02 pH
pH*
one or two-point calibration, two sets of standard buffers
Calibration
available (4.01, 7.01, 10.01 or NIST 4.01, 6.86, 9.18)
Temperature
automatic from -5.0 to 105.0°C (23 to 221°F)
Compensation
Additional Battery Type / Life 1.5V AAA (3) / approximately 1200 hours of continuous use
Specifications
Auto-off after 8 minutes of non-use
pH solutions begin on page 2.142; electrode cleaning solutions begin on page 2.156 www.hannainst.com | 2.83
HI99162
2 pH / Temperature
Meter for Milk
with Application Specific Probe
• Waterproof
• Application specific electrode
• Automatic Temperature
Compensation (ATC)
• Automatic one or two-point calibration
• Multi-level LCD display
• On-screen tutorial for
calibration and set up
• Stability indicator for accurate
pH
data recording
• Battery Error Prevention System
• Battery life displayed on startup
• Supplied as a complete kit
2.84 | www.hannainst.com
On-screen Features
2
pH
modes or NIST (pH 4.01, pH 6.86, pH 9.18) buffers the calibration process
portable
Specifications HI99162
Range -2.00 to 16.00 pH
Resolution 0.01 pH
Accuracy ±0.02 pH
pH*
automatic, one or two-point calibration with two
Calibration sets of standard buffers (standard pH 4.01, 7.01, 10.01
or NIST pH 4.01, 6.86, 9.18)
Resolution 0.1°C/0.1°F
Temperature*
±0.5°C (up to 60°C); ±1.0°C (outside) / ±1°F (up to 140°F);
Accuracy
±2.0°F (outside)
Additional
Battery Type/Life 1.5V AAA (3) / approximately 1200 hours of continuous use Rugged custom carrying case
Specifications Auto-off auto-off after 8 minutes of non-use The HI99162 meter, probe, and all
Environment 0 to 50°C (32 to 122°F); RH max. 100% accessories are supplied in a rugged carrying
Dimensions / Weight 152 x 58 x 30 mm (6.0 x 2.3 x 1.2”) / 205 g (7.2 oz) case designed to provide years of use. The
inside compartment of the carrying case is
HI99162 is supplied with FC101D pH probe with internal temperature sensor, HI70004
Ordering thermoformed to securely hold and protect
pH 4.01 buffer sachet, HI70007 pH 7.01 buffer sachet, HI700640 electrode cleaning
Information solution sachets (2), batteries, instruction manual, and rugged carrying case. all of the components.
pH solutions begin on page 2.142; electrode cleaning solutions begin on page 2.156 www.hannainst.com | 2.85
FC101D
2 pH / Temperature Probe
for Milk
• PVDF body
• Spheric glass tip
• Single ceramic junction
• Double junction
• Built-in temperature sensor
• Refillable electrolyte
·· The silver-free electrolyte ensures
pH
Range pH: 0 to 13
Recommended
0 to 80°C (32 to 176°F) - GP
Operating Temperature
Amplifier yes
Connection DIN
2.86 | www.hannainst.com
2
Application Importance
The measurement of pH in milk is important come from cows infected with mastitis.
in testing for impurities, spoilage, and signs of Mastitis is an ever-present challenge with
mastitis infection. While there are a number dairy milking cows. When infected, the cow's
of factors that affect the composition of immune system releases histamine and other
milk, pH measurements can help producers compounds in response to the infection.
understand what might be causing certain There is a resulting increase in permeability
compositional changes. pH measurements of endothelial and epithelial cell layers,
are commonly performed at various points in allowing blood components to pass through
a milk processing plant. a paracellular pathway. Since blood plasma is
slightly alkaline, the resulting pH of milk will be
pH
Fresh milk has a pH value of 6.7. When the pH
higher than normal. Typically milk producers
value of the milk falls below pH 6.7, it typically
can perform a somatic cell count to detect
indicates spoilage by bacterial degradation.
Bacteria from the family of Lactobacillaceae a mastitis infection, but a pH measurement
are lactic acid bacteria (LAB) responsible for offers a quick way to screen for infection.
the breakdown of the lactose in milk to form
Understanding the pH of raw milk can also
lactic acid. Eventually when the milk reaches
help producers optimize their processing
an acidic enough pH, coagulation or curdling
techniques. For example, in operations that
will occur along with the characteristic smell
and taste of “sour” milk. use Ultra High Temperature (UHT) processing,
even small variations from pH 6.7 can affect
Milk with pH values higher than pH 6.7 the time required for pasteurization and the
potentially indicate that the milk may have stability of the milk after treatment.
portable
www.hannainst.com | 2.87
HI99164
2 pH / Temperature
Meter for Yogurt
with Application Specific Probe
• Waterproof
• Application specific electrode
• Automatic Temperature
Compensation (ATC)
• Automatic one or two-point calibration
• Multi-level LCD display
• On-screen tutorial for
calibration and set up
• Stability indicator for accurate
pH
data recording
• Battery Error Prevention System
• Battery life displayed on startup
• Supplied as a complete kit
2.88 | www.hannainst.com
On-screen Features
2
pH
modes NIST (pH 4.01, pH 6.86, pH 9.18) buffers the calibration process
portable
Specifications HI99164
Range -2.00 to 16.00 pH
Resolution 0.01 pH
Accuracy ±0.02 pH
pH*
automatic, one or two-point calibration with two
Calibration sets of standard buffers (standard pH 4.01, 7.01, 10.01
or NIST pH 4.01, 6.86, 9.18)
Resolution 0.1°C/0.1°F
Temperature*
±0.5°C (up to 60°C); ±1.0°C (outside) / ±1°F (up to 140°F);
Accuracy
±2.0°F (outside)
Battery Type/Life 1.5V AAA (3) / approximately 1200 hours of continuous use
Additional Rugged custom carrying case
Specifications Auto-off auto-off after 8 minutes of non-use
The HI99164 meter, probe, and all
Environment 0 to 50°C (32 to 122°F); RH max. 100%
accessories are supplied in a rugged carrying
Dimensions / Weight 152 x 58 x 30 mm (6.0 x 2.3 x 1.2”) / 205 g (7.2 oz)
case designed to provide years of use. The
Ordering HI99164 is supplied with FC213D pH probe with internal temperature sensor, HI70004 inside compartment of the carrying case is
pH 4.01 buffer sachet, HI70007 pH 7.01 buffer sachet, HI700643 electrode cleaning
Information thermoformed to securely hold and protect
solution sachets (2), batteries, instruction manual, and rugged carrying case.
all of the components.
* Limits will be reduced to actual sensor limits
pH solutions begin on page 2.142; electrode cleaning solutions begin on page 2.156 www.hannainst.com | 2.89
FC213D
2 pH / Temperature Probe
for Yogurt
• Glass body
• Conic glass tip
• Low temperature glass
• Open Junction reference
• Built-in temperature sensor
• Viscolene electrolyte
·· The viscolene electrolyte offers a
hard gel interface between the inner
electrode components and the sample
being measured. The electrolyte
is silver-free for use in yogurt
pH
and is maintenance-free.
Reference double
Junction open
Electrolyte viscolene
Range pH: 0 to 12
Recommended
0 to 50°C (32 to 122°F)
Operating Temperature
Amplifier yes
Connection DIN
2.90 | www.hannainst.com
2
Application Importance
Monitoring pH is crucial in producing cooling. The amount of lactic acid present at
consistent, quality yogurt. Yogurt is made this pH level is ideal for yogurt, giving it the
by the fermentation of milk with live characteristic tartness, aiding in thickening,
bacterial cultures. Following pasteurization and acting as a preservative against
and compositional adjustment, milk is undesirable strains of bacteria.
homogenized for a consistent texture, heated
to the desired thickness, and cooled before By verifying that fermentation continues to a
inoculation. Most yogurt is inoculated with predetermined pH endpoint, yogurt producers
a starter culture consisting of Lactobacillus can ensure their products remain consistent
bulgaricus and Streptococcus thermophilus.
pH
in terms of flavor, aroma, and texture. A
Once the live culture is added, the mixture of deviation from the predetermined pH can lead
milk and bacteria is incubated, allowing for to a reduced shelf life of yogurt or create a
fermentation of lactose to lactic acid. As lactic
product that is too bitter or tart. Syneresis is
acid is produced, there is a correlating drop in
the separation of liquid, in this case whey, from
pH. Due to the more acidic mixture, the casein
the milk solids; this can occur if fermentation
protein in milk coagulates and precipitates out,
is stopped too early or too late, resulting
thickening the milk into a yogurt-like texture.
in yogurt that is respectively too alkaline
Yogurt producers cease incubation once a or too acidic. Consumers expect yogurt to
specific pH level is reached. Most producers remain texturally consistent, so ensuring
have a set point between pH 4.0 and 4.6 fermentation is stopped at the appropriate pH
in which fermentation is stopped by rapid is vital to consumer perception.
portable
www.hannainst.com | 2.91
HI99165
2 pH / Temperature
Meter for Cheese
with Application Specific Probe
• Waterproof
• Application specific electrode
• Automatic Temperature
Compensation (ATC)
• Automatic one or two-point calibration
• Multi-level LCD display
• On-screen tutorial for
calibration and set up
• Stability indicator for accurate
pH
data recording
• Battery Error Prevention System
• Battery life displayed on startup
• Supplied as a complete kit
2.92 | www.hannainst.com
On-screen Features
2
pH
modes NIST (pH 4.01, pH 6.86, pH 9.18) buffers the calibration process
portable
Specifications HI99165
Range -2.00 to 16.00 pH
Resolution 0.01 pH
Accuracy ±0.02 pH
pH*
automatic, one or two-point calibration with two
Calibration sets of standard buffers (standard pH 4.01, 7.01, 10.01
or NIST pH 4.01, 6.86, 9.18)
Resolution 0.1°C/0.1°F
Temperature*
±0.5°C (up to 60°C); ±1.0°C (outside) / ±1°F (up to 140°F);
Accuracy
±2.0°F (outside)
Battery Type/Life 1.5V AAA (3) / approximately 1200 hours of continuous use
Additional Rugged custom carrying case
Specifications Auto-off auto-off after 8 minutes of non-use
The HI99165 meter, probe, and all
Environment 0 to 50°C (32 to 122°F); RH max. 100%
accessories are supplied in a rugged carrying
Dimensions / Weight 152 x 58 x 30 mm (6.0 x 2.3 x 1.2”) / 205 g (7.2 oz)
case designed to provide years of use. The
Ordering HI99165 is supplied with FC242D pH probe with internal temperature sensor, HI70004 inside compartment of the carrying case is
pH 4.01 buffer sachet, HI70007 pH 7.01 buffer sachet, HI700642 electrode cleaning thermoformed to securely hold and protect
Information solution sachets (2), batteries, instruction manual, and rugged carrying case.
all of the components.
* Limits will be reduced to actual sensor limits
pH solutions begin on page 2.142; electrode cleaning solutions begin on page 2.156 www.hannainst.com | 2.93
FC242D
2 pH / Temperature Probe
for Cheese
• Stainless steel body
• Conic glass tip
• Low temperature glass
• Built-in temperature sensor
pH
• Viscolene electrolyte
• AISI 316 stainless steel body
·· The viscolene electrolyte offers a
·· The metal body offers durability in the
hard gel interface between the inner
production facility and can withstand
electrode components and the sample
chloride concentrations that cause
being measured. The electrolyte
corrosion in other types of alloys.
is silver-free for use in cheese
products and is maintenance-free.
Specifications FC242D
Description pre-amplified pH / temperature probe
Reference single
Junction ceramic
Electrolyte viscolene
Range pH: 0 to 12
Recommended Operating
0 to 50°C (32 to 122°F)
Temperature
Amplifier yes
Connection DIN
2.94 | www.hannainst.com
2
Application Importance
pH is an essential measurement throughout are cut into smaller pieces to prepare the
the entire cheesemaking process. From the cheese for salting. Curds with a lower pH at
initial measurements of incoming milk to the milling result in a harder cheese. A low pH will
final measurements of ripened cheese, pH also result in higher salt absorption during
is the most important parameter for cheese the salting stage.
quality and safety control.
When curds are pressed into a final, solid form,
Acidification of milk begins with the addition the pH directly affects how well the curds
of bacterial culture and rennet. The bacteria fuse together. If the pH is too high during
consume lactose and create lactic acid as a pressing, the curds will not bind together as
pH
byproduct of fermentation, lowering the pH well and the final cheese will have a more
of the milk. Once the milk reaches a particular open texture.
pH, the rennet is added. The enzymes in
rennet help to speed up curdling and create During brining, the cheese soaks up salt from
a firmer substance. For cheesemakers that the brine solution and loses excess moisture.
dilute their rennet, the pH of the dilution The pH of the brine solution should be close
water is also critical; water that is near pH 7 to the pH of the cheese, ensuring equilibrium
or higher can deactivate the rennet, causing of ions like calcium and hydrogen. If there is an
problems with coagulation. imbalance during brining, the final product can
have rind defects, discoloration, a weakened
Once the curds are cut, stirred, and cooked, the texture, and a shorter shelf life.
liquid whey must be drained. The pH of whey
at draining directly affects the composition Cheeses must fall within a narrow pH range to
and texture of the final cheese product. Whey provide an optimal environment for microbial
that has a relatively high pH contributes to and enzymatic processes that occur during
higher levels of calcium and phosphate and ripening. Bacterial cultures used in ripening
results in a stronger curd. Typical pH levels at are responsible for characteristics like the
draining can vary depending on the type of holes in Swiss cheese, the white mold on Brie
cheese; for example, Swiss cheese is drained rinds, and the aroma of Limburger cheese.
between pH 6.3 and 6.5 while Cheddar A deviation from the ideal pH is not only
cheese is drained between pH 6.0 and 6.2. detrimental to the ecology of the bacteria, but
also to the cheese structure. Higher pH levels
portable
The next stages of milling and salting are can result in cheeses that are more elastic
affected by pH as well. During milling, curds while lower pH levels can cause brittleness.
www.hannainst.com | 2.95
HI99161
2 Portable pH Meter
for yogurt, cheese, and semi-solids
displayed on startup
• Help feature
·· Tutorial messages displayed on LCD
• Specialized electrode
·· The FC202D is the ideal electrode
to measure the pH of yogurt,
portable
Resolution 0.01 pH
Accuracy ±0.02 pH
pH*
one or two-point calibration, two sets of standard buffers
Calibration
available (4.01, 7.01, 10.01 or NIST 4.01, 6.86, 9.18)
Temperature
automatic from -5.0 to 105.0°C (23 to 221°F)
Compensation
Additional Battery Type / Life 1.5V AAA (3) / approximately 1200 hours of continuous use
Specifications
Auto-off after 8 minutes of non-use
2.96 | www.hannainst.com pH solutions begin on page 2.142; electrode cleaning solutions begin on page 2.156
HI99163
Portable pH Meter 2
and Sensor for Meat
pH
• Help feature
·· Tutorial messages displayed on LCD
portable
Specifications HI99163
Range -2.00 to 16.00 pH • Two blade lengths available
·· Use the optional FC098 (20 mm)
Resolution 0.01 pH
or the included FC099 (35 mm)
Accuracy ±0.02 pH
stainless steel penetration blades
pH*
Calibration
one or two-point calibration, two sets of standard buffers for meat processing applications
available (4.01, 7.01, 10.01 or NIST 4.01, 6.86, 9.18)
Temperature
automatic from -5.0 to 105.0°C (23 to 221°F)
Compensation
Battery Type / Life 1.5V AAA (3) / approximately 1200 hours of continuous use
Additional
Specifications Auto-off after 8 minutes of non-use
Dimensions / Weight 152 x 58 x 30 mm (6.0 x 2.3 x 1.2”) / 205 g (7.2 oz.) • Optional shockproof rubber boot
HI99163 is supplied with FC232D pH and temperature probe with FC099 stainless steel ·· Specially designed to protect your
Ordering blade tip, HI70004 pH 4.01 buffer solution sachet, HI70007 pH 7.01 buffer solution instrument from damage or impact
Information sachet, HI700630 electrode acid cleaning solution sachets for meat, grease and fats (2),
HI710023 Orange
batteries, instructions and hard carrying case.
HI710024 Blue
* Limits will be reduced to actual sensor limits
pH solutions begin on page 2.142; electrode cleaning solutions begin on page 2.156 www.hannainst.com | 2.97
HI99192
2 Portable pH Meter
for Drinking Water
• Automatic Temperature
Compensation (ATC)
• Two-point calibration
• Battery Error Prevention System (BEPS)
·· Alerts the user of low battery power
that could adversely affect readings
• Waterproof
·· Compact, heavy-duty, and
waterproof protected casing
• Battery life indicator
·· Battery percentage
displayed on startup
pH
• Help feature
·· Tutorial messages displayed on LCD
2.98 | www.hannainst.com
2
Triple ceramic junction
FC215D Amplified
pH Electrode
• Built-in temperature sensor
pH
·· For automatic compensation
of temperature variations
The pH of Drinking Water
• Refillable pH electrode
The pH of drinking water is a vital measurement. If the pH is too low, or acidic, the water will be
corrosive to the distribution system and water pipes in homes. The pH of water also influences • Amplified electrode
other properties including taste, odor, clarity, and efficiency of disinfection efficiency. In the ·· For fast, stable response
United States, the pH of water is determined by a pH meter according to EPA method 150.1 and that is immuneto electrical
Standard Methods 4500-H. noise due to humidity
• Triple ceramic junction design
Most drinking water plants use surface water (lakes, rivers, and streams) or groundwater as
their point source. Surface water is typically lower in mineral content, which results in lower
EC/TDS readings. Groundwater that has percolated through limestone, dolomite or gypsum
will have a relatively higher mineral content. Depending on location, there are sources of The HI99192 drinking water pH meter uses
groundwater that can be very low in mineral content. the glass body FC215D amplified pH electrode.
The amplified electrode provides a fast stable
Measuring the pH of water that is low in minerals can be difficult. The lower the mineral content response that is immune to electrical noise
the less conductive the water will be. Low conductivity water presents a challenge since the pH due to humidity. The electrode contains
meter is an electrochemical system that relies on the solution being measured to be conductive. an internal temperature probe to allow for
The HI99192 uses the FC215D amplified pH electrode. The FC215D has three ceramic junctions automatic compensation for any variances in
in the outer reference cell that allows for pH measurement in low conductivity solutions. temperature. The electrolyte solution in the
electrode is refillable.
Specifications HI99192
portable
An integral part of any pH electrode is the
Range -2.00 to 16.00 pH
reference junction. The reference junction
Resolution 0.01 pH is a part of the electrode that allows for the
Accuracy ±0.02 pH flow of ions located in the reference cell
pH*
one or two-point calibration, two sets of standard buffers
into the sample being measured. The ions
Calibration
available (4.01, 7.01, 10.01 or NIST 4.01, 6.86, 9.18) provide for an electrical connection between
the reference electrode and the indicating
Temperature
automatic from -5.0 to 105.0°C (23 to 221°F) electrode. A standard pH electrode will use a
Compensation
single ceramic junction that allows for 15 to 20
Range -5.0 to 105.0°C; 23.0 to 221.0°F
μL/hour of electrolyte to flow. The FC215D has
Resolution 0.1°C; 0.1°F
Temperature* three ceramic junctions providing for 40 to 50
Accuracy
±0.5°C (up to 60°C), ±1.0°C (outside); μL/hour of electrolyte to flow. This increased
±1.0°F (up to 140°F), ±2.0°F (outside) flow provides a greater continuity between
FC215D pre-amplified pH electrode with internal the reference electrode and the indicating
Electrode temperature sensor, DIN connector, 1 m (3.3’) cable electrode, making it suitable for water of low
(included)
ionic strength. To optimize the flow from the
Additional Battery Type / Life 1.5V AAA (3) / approximately 1200 hours of continuous use electrode, the refill cap should be unscrewed;
Specifications
Auto-off after 8 minutes of non-use this allows for positive head pressure to be
created, allowing for the electrolyte to flow
Environment 0 to 50°C (32 to 122°F); RH max. 100%
more easily into the sample.
Dimensions / Weight 152 x 58 x 30 mm (6.0 x 2.3 x 1.2”) / 205 g (7.2 oz.)
HI99192 is supplied with FC215D pH and temperature probe, HI70004 pH 4.01 buffer
Ordering solution sachet, HI70007 pH 7.01 buffer solution sachet, HI700661 electrode cleaning
Information solution sachets (2), HI7082 3.5 KCl filling solution, batteries, instructions and hard
carrying case.
2 Portable pH Meter
for Beer Analysis
• Automatic Temperature
Compensation (ATC)
• Two-point calibration
• Battery Error Prevention System (BEPS)
·· Alerts the user of low battery power
that could adversely affect readings
• Waterproof
·· Compact, heavy-duty, and
waterproof protected casing
• Battery life indicator
·· Battery percentage
displayed on startup
pH
• Help feature
·· Tutorial messages displayed on LCD
2.100 | www.hannainst.com
2
High Temperature Glass Electrode
FC214D Amplified
pH Electrode
pH
• Amplified electrode
·· Provides a fast, stable response
that is immune to electrical
noise due to static discharge
The Effects of pH in Brewing
• Maintenance free gel filled electrode
In the brewing process, the enzymes required to convert starch into sugar are pH-sensitive, ·· No fill solution required
with an optimal pH of 5.2 to 5.6. Different compounds are used to adjust the pH including
• Highly durable titanium body
phosphoric acid, lactic acid and gypsum.
• Extendable cloth junction
Wort clarity and break formation are also affected by pH. Protein coagulation occurs during wort to prevent clogging
boiling, where the optimum pH is around pH 4.9, though a common boil pH is pH 5.2. A pH that
• High temperature glass
is too high will not only inhibit coagulation, but also promote browning due to the interaction of
amino acids and reducing sugars.
Hop utilization during the wort boil is also affected by pH; as pH increases, the solubility of hop The HI99151 beer pH meter uses the titanium
resins increase. A high pH also increases the release of tannins, resulting in a harsher taste, and bodied FC214D amplified pH electrode with
tends to favor elevated microbial activity. built-in temperature sensor. The amplified
electrode provides a fast, stable response
that is immune to electrical noise due to
static discharge. The body of the electrode
portable
Specifications HI99151 is made from titanium, which provides an
Range -2.00 to 16.00 pH unbreakable structure that allows the
transfer of heat to the internal temperature
Resolution 0.01 pH
sensor for rapid temperature compensation.
Accuracy ±0.02 pH
pH* An integral part of any pH electrode is the
one or two-point calibration, two sets of standard buffers
Calibration
available (4.01, 7.01, 10.01 or NIST 4.01, 6.86, 9.18) reference junction. The reference junction
Temperature is a part of the electrode that allows for the
automatic from -5.0 to 105.0°C (23 to 221°F)
Compensation flow of ions located in the reference cell into
Range -5.0 to 105.0°C; 23.0 to 221.0°F
the sample being measured. It is vital that this
flow occurs in order to complete an electrical
Resolution 0.1°C; 0.1°F
Temperature* circuit. Any clogging of the reference junction
±0.5°C (up to 60°C), ±1.0°C (outside); will prevent the circuit from being completed
Accuracy
±1.0°F (up to 140°F), ±2.0°F (outside)
and will result in readings that are erratic and/
FC214D pre-amplified pH electrode with internal or constantly drifting. A typical pH electrode
Electrode temperature sensor, DIN connector, 1 m (3.3’) cable
has a junction made of ceramic material.
(included)
This ceramic material can be easily clogged
Additional Battery Type / Life 1.5V AAA (3) / approximately 1200 hours of continuous use by samples, such as mash with a high solids
Specifications
Auto-off after 8 minutes of non-use content or wort that is viscous. With the cloth
Environment 0 to 50°C (32 to 122°F); RH max. 100% junction it is possible to clear the junction by
simply extracting 1/8” of the junction from
Dimensions / Weight 152 x 58 x 30 mm (6.0 x 2.3 x 1.2”) / 205 g (7.2 oz.)
the electrode. This exposes a new portion,
HI99151 is supplied with FC214D pH and temperature probe, HI70004 pH 4.01 buffer
Ordering resulting in a renewed junction.
solution sachet, HI70007 pH 7.01 buffer solution sachet, HI700661 electrode cleaning
Information solution sachets (2), batteries, instructions and hard carrying case.
2 Portable pH Meter
for Wine Analysis
displayed on startup
• Help feature
·· Tutorial messages displayed on LCD
2.102 | www.hannainst.com
2
pH
The Importance of pH in Wine Making
HI1048D pH electrode
The pH of wine is important to determine because it will affect the quality of the final product
in terms of taste, color, oxidation, chemical stability and other factors. Generally in winemaking, • PE sleeve
the higher the pH reading, the lower amount of acidity in the wine. Three important factors
• Refillable pH electrode
in determining the pH of wine include the ratio of malic acid to tartaric acid, the amount of
potassium, and the total amount of acid present. • Clogging prevention system (CPS™)
Most wines optimally have a pH between 2.9 and 4.0, with values differing based on the type of
wine. Values above pH 4.0 indicate that the wine may spoil quickly and be chemically unstable. The HI99111 portable pH meter for wine uses
Lower pH values allow the wine to stay fresher for a longer period and retain its original color the glass body HI1048D pH electrode with
and flavor. High pH wine is more likely to breed bacteria and become unsuitable to drink. Hanna’s unique Clogging Prevention System
(CPSTM). This electrode provides a fast stable
For finished white wines, the ideal pH is between pH 3.00 and pH 3.30, while the final pH for
response and resists clogging. The electrolyte
red wine is ideally between pH 3.40 and pH 3.50. The optimal pH before the fermentation
solution in the electrode is refillable.
process is between pH 2.9 and pH 4.0. The pH of wine therefore not only affects the color
of wine, but also the oxidation, yeast fermentation, protein stability, and bacterial growth An integral part of any pH electrode is the
and fermentation. reference junction. The reference junction
is a part of the electrode that allows for the
portable
Specifications HI99111 flow of ions located in the reference cell
Range -2.00 to 16.00 pH into the sample being measured. The ions
provide for an electrical connection between
Resolution 0.01 pH
the reference electrode and the indicating
Accuracy ±0.02 pH
electrode. A standard pH electrode will use
pH*
one or two-point calibration, two sets of standard buffers a single ceramic junction; however, the CPS™
Calibration
available (3.00, 7.01, 10.01 or NIST 4.01, 6.86, 9.18)
(Clogging Prevention System) is an innovation
Temperature in electrode technology. Conventional pH
automatic from -5.0 to 105.0°C (23 to 221°F)
Compensation electrodes use ceramic junctions that clog
Range -5.0 to 105.0°C; 23.0 to 221.0°F quickly when used in wine. When the junction
Resolution 0.1°C; 0.1°F is clogged, the electrode does not function.
Temperature*
CPS™ technology utilizes the porousness
±0.5°C (up to 60°C), ±1.0°C (outside);
Accuracy
±1.0°F (up to 140°F), ±2.0°F (outside) of ground glass coupled with a PE sleeve to
prevent clogging of the junction. The ground
HI1048D pH/temperature probe with CPS™ technology,
Electrode glass allows proper flow of the liquid, while
DIN connector, 1 m (3.3’) cable (included)
the PE sleeve repels dirt. As a result, pH
Battery Type / Life 1.5V AAA (3) / approximately 1200 hours of continuous use
Additional electrodes with CPS™ stay fresh up to 20
Specifications Auto-off after 8 minutes of non-use times longer than conventional electrodes.
Environment 0 to 50°C (32 to 122°F); RH max. 100%
To optimize the flow from the electrode the
Dimensions / Weight 152 x 58 x 30 mm (6.0 x 2.3 x 1.2”) / 205 g (7.2 oz.)
refill cap should be unscrewed so that it is
HI99111 is supplied with HI1048D pH and temperature probe, pH 3.00 buffer solution
Ordering sachet, pH 7.01 buffer solution sachet, electrode cleaning solution sachet for wine
open. This allows for positive head pressure to
Information deposits and electrode cleaning solution sachet for wine stains, batteries, instructions be created allowing for the electrolyte to drain
and hard carrying case. more easily from the reference electrode.
* Limits will be reduced to actual sensor limits
pH solutions begin on page 2.142; electrode cleaning solutions begin on page 2.156 www.hannainst.com | 2.103
HI8424
2 General Purpose
pH/mV Meter
• Automatic Temperature
Compensation (ATC)
• Waterproof
·· Compact, heavy-duty, and
waterproof protected casing
• Two-point calibration
·· Automatic one or two-point calibration
• Hold
·· HOLD function
• Battery indicator
·· Low battery indicator
pH
2.104 | www.hannainst.com pH and ORP electrodes begin on page 2.122; pH and ORP solutions begin on page 2.142
HI83141 · HI8314
Analog pH/mV 2
Meters
• Automatic Temperature Compensation (ATC)
• Two-point Calibration
• Water-resistant
·· Compact, heavy-duty casing
• Battery indicator
·· Low battery indicator
• Auto shut-off
pH
easy to use.
portable
Accuracy ±1 mV ±1 mV
HI83141: HI3131B
Range 0.0 to 100.0°C; 32.0 to 212.0°F
Temperature* Resolution 0.1°C; 0.1°F 0.1°C; 0.1°F HI8314: HI3618D or HI4619D
Accuracy ±0.4°C; ±0.8F (excluding probe error)
HI1217D PEI body, pre-
HI1230B PEI body pH
amplified pH electrode
electrode with BNC
pH Electrode with internal temperature
connector and 1 m (3.3’)
sensor, DIN connector and
cable (included)
1 m cable (included)
HI7669AW stainless steel
Temperature Probe temperature probe, BNC —
Additional connector (included)
Specifications
Slope / Offset Calibration from 80 to 110% / ±1 pH
Battery Type / Life 9V / approximately 450 hours of continuous use
Auto Shut-Off after 8 minutes of non-use
Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing
Dimensions 145 x 80 x 36 mm (5.7 x 3.1 x 1.4’’)
Weight 230 g (8.1 oz.)
pH and ORP electrodes begin on page 2.122; pH and ORP solutions begin on page 2.142 www.hannainst.com | 2.105
HI8010 · HI8014
2 Educational pH
Meters
• Automatic Temperature
Compensation (ATC)
• Two-point calibration
Range — ±1999 mV
mV Resolution — 1 mV
Accuracy — ±1 mV
Ordering HI8010 and HI8014 are supplied with HI1230B pH electrode, calibration screwdriver,
Information battery and instructions.
2.106 | www.hannainst.com pH and ORP electrodes begin on page 2.122; pH and ORP solutions begin on page 2.142
HI8427 · HI931001
pH/mV Precision 2
Simulators
• Simulate pH or ORP sensors to
troubleshoot your meter
• Simulate temperature
• Provided with universal BNC connector
pH
Provided with a universal BNC connector,
this unit is also a high impedance tester
for cable and connector inspection with a
leakage sensitivity of 109 ohm. This unique
tester eliminates the need for very expensive
MΩ meters.
portable
Specifications HI931001 HI8427
Range 0.00 to 14.00 pH 0, 2, 4, 7, 10, 12, 14 pH
mV Resolution 1 mV —
Accuracy ±1 mV ±5 mV
185 x 82 x 53 mm 185 x 82 x 53 mm
Dimensions
(7.3 x 3.2 x 2.1’’) (7.3 x 3.2 x 2.1’’)
Ordering
HI8427 and HI931001 are supplied with HI7858/1 BNC/BNC coaxial cable
Information
www.hannainst.com | 2.107
2 pH Electrodes
Designed and Manufactured by Hanna
ln(10)RT / nF known as the slope factor, will change also. The table
electrodes. Hanna has helped propel the field of sensor technology
below illustrates the change in slope factor for changes in temperature.
with it’s innovative methodology. The Hanna line of pH electrodes is
produced in state of the art manufacturing facilities, and is available Temperature (°C) Slope Factor (mV/pH)
with glass or thermal plastic bodies. 05 55.18
10 56.18
In 1981, Hanna developed its own formulation for sensing glass 15 57.18
with the help of the Experimental Institute for Glass in Murano Italy. 20 58.17
From that point forward, the company has continued to offer these 25 59.16
premium pH sensing glass electrodes that cannot be imitated. While 30 60.15
35 61.14
other companies have reduced their offerings, Hanna has continued
to expand their electrode line to support a multitude of specific
applications. An extensive variety of cleaning and maintenance
How Temperature Affects Solution pH
solutions are also available to keep electrodes at peak performance. Samples change pH as a function of temperature due to changes in
ion dissociation; as temperature increases, ion activity also increases.
pH Electrode Manufacturing An example of this is pH buffers, whose well-characterized values are
published on the buffer bottles. With very pure water, a change of
Other electrode producers use the continuous fusion technique ~1.3 pH is observed between 0 and 100°C. This example shows that
in crucibles with induction furnaces. In this practice, the glass is even a neutral solution can have a large temperature coefficient. All
exposed to the fusion temperature for hours, where it is difficult to samples have a temperature coefficient that is variable for actual
retain the quality of the product due to the evaporation of some samples. Changes in pH due to the sample temperature coefficient are
of its components. Hanna uses glass blowing technology typical of not compensated for. There is, however, an exception to this; because
the Murano masters, with sensitive glass sticks fused in controlled buffers are well-characterized, they are compensated for during
batches. Only this technique, which exposes the sensitive glass to the calibration on intelligent pH meters. The buffers will display a 25°C
high fusion temperature for a matter of seconds, can guarantee the value during calibration but will change after the calibration to read
consistency and quality of the pH half-cell. their actual pH at the temperature of measurement.
2.108 | www.hannainst.com
pH Electrodes 2
Designed and Manufactured by Hanna
Reference Electrode
pH Half-cell Reference
The half-cell of an electrochemical cell that supplies a stable Half-cell
voltage that is known, constant, and completely insensitive to the Ag/AgCl Internal
Wire
measurement solution. Changes in voltages generated from the pH
pH
Internal Reference
sensor are measured versus this electrode’s voltage. Wire
Buffered KCl
Solution
High Input Impedance Meter High Concentration
Electrolyte Solution
The measurement device that processes the voltage from the (i.e. 3.5M KCl and
electrochemical cell and converts it into a meaningful measurement AgCl Electrolyte)
unit (pH). The measurement is done with virtually zero current flow
to prevent polarization of the electrodes. Modern pH meters also may Salt Bridge Junction
provide sensor diagnostics, automatic buffer recognition, calibration Connecting the
reminders and user prompts. pH Sensitive Reference to the
Glass External Solution
Chemical pH Buffers
Stable, well-characterized standards used for calibration. Two or more
Combination pH
pH buffers that bracket the sample pH range are suggested for the
Electrode
most accurate results.
Ag/AgCl
Inner Tube Housing Reference Wire
Thermometer or Temperature Probe the Membrane Sensing
Wire
A temperature measurement is desired during calibration and
measurement to make adjustments to the Nernst slope factor. An
auxiliary or built-in temperature probe ensures both calibration and
electrodes
Ceramic Junction
measurement are automatically temperature compensated, thus Electrolyte
eliminating error. Containing Silver
Magnetic Stirrer
Used in a laboratory setting, a magnetic stirrer together with magnetic
stir bars continually agitate the buffer and/or samples to keep them
homogenous, eliminating temperature or sample gradients.
www.hannainst.com | 2.109
2 pH Electrodes
Designed and Manufactured by Hanna
electrolyte solution. Therefore, when the electrolyte solution makes plastic bodied electrodes with gelled
contact with the sample, some AgCl will precipitate on the external face electrolytes. The advantage of this
of the junction. The result is drifty readings obtained from the sensor. junction is it is renewable; as the
cloth like material is pulled out from
Hanna’s double junction system, as the name implies, has two junctions,
its position, the junction is renewed
only one of which is in contact with the sample as shown in the figure
below Under adverse conditions, the same tendency of sample ingress with a fresh, uncontaminated surface.
is evident. However, as the reference electrode system is separated
physically from the intermediate electrolyte area, the contamination of Open Junction
the electrode is minimized. The likelihood of clogging of the junction is
This type of junction is often found in
also reduced with a double junction electrode since the outer reference
cell uses a fill solution that is “silver-free.” Since there is no silver foodcare pH electrodes and is filled
present, there is no precipitate forming to clog the junction. with a special gel which comes into
direct contact with the solution to be
measured. An advantage of an open
Single junction electrodes use a fill solution such as the HI7071
that contains 3.5M KCl + AgCl, while double junction electrodes junction is low contact resistance and
typically use HI7082 that contains 3.5M KCl. low clogging potential.
Cone Style
Inner Tube Electrolyte Ag/AgCl
Housing the Containing This style junction is also renewable.
Reference Wire
electrodes
Capillary Junction
Double Junction Single Junction This type of junction can be made with smooth or frosted glass.
Electrode Electrode
The advantage of a capillary junction is a fast flow rate and an open
channel. It is typically used with thickened electrolytes.
Types of Junctions:
Open Platinum
Porous Ceramic This style junction is made by partially sealing fine Pt wires through
Normally used in electrodes with the stem glass, creating a leakage path. These have high flow rates.
glass bodies because ceramic with the
correct expansion coefficient is easily Fiberglass
welded to glass. Ceramic is available
with different porosities and diameters. This style junction is very similar to a fiber wick. The junction is typically
It may be referred to as a diaphragm. renewable and may have a high flow rate depending on strand number
in the bundle.
2.110 | www.hannainst.com
pH Electrodes 2
Designed & Manufactured by Hanna
pH
error, hydrofluoric acid resistance and abrasion resistance.
The pH membranes used as the
Hanna utilizes four different types of pH sensitive glass to cover the
sensor on pH electrodes can be
vast number of applications. For instance, some electrodes with low
fabricated with different shaped
impedance glass are particularly suited at performing measurements
in solutions with low conductivity or cold solutions. As a general rule, membranes; spherical, conical,
the pH of glass impedance doubles for every 10°C (50°F) drop in and flat tips are used in Hanna’s
temperature. Very high impedance results in a very noisy, erratic signal products. For analysis of small
that is prone to errors in measurement. Hanna offers low temperature samples, microelectrodes are also Spherical
(LT) glass, a low impedance glass for these applications. At elevated available.
temperatures, glass can dissolve readily, shortening the life and
performance of the sensor. Hanna offers high temperature (HT) glass A spherical tip is recommended
for these applications. for general use in aqueous or
liquid solutions and provides a
GP Glass wide surface of contact with the
sample.
Hanna’s general purpose (GP) hydrogen sensitive glass provides
the best response over the entire pH range and can be used for a
A conical tip is recommended for
wide range of applications. Great results are obtained with a sphere
semi-solid products, emulsions,
geometry with a diameter of 9.5 mm (0.37’’), achieving a system
with 100 MΩ impedance. The GP glass is also used on smaller diameter cheese, meat and food in general.
Conical
spheres. As the diameter of the sphere is reduced, the system
electrodes
A flat tip is recommended for
impedance increases. The response time can then increase from the
usual 2 seconds for the 9.5 mm (0.37’’) sphere to about 6 seconds with direct surface measurement on
a 3 mm (0.12’’) sphere. The color of the GP glass is green. skin, leather, paper, etc.
www.hannainst.com | 2.111
2 pH Electrodes
Designed and Manufactured by Hanna
Types of Connectors 200 μS/cm, we suggest the use of specific electrodes, such as
Most Hanna meters accept pH electrodes with one of the connectors the HI1053 which has LT glass suitable for low temperatures.
listed below. This pH electrode has a triple ceramic junction that allows
a higher flow rate of reference electrolyte to help provide
The BNC connector is the most versatile since it can be used with electrical conductivity.
any meter that utilizes BNC, regardless of brand.
DIN, 3.5 mm, Screw and T-type connections are generally proprietary
to the meters they are supplied with. Screw and T-Type connectors
Alkaline Error
attach directly to the meter. Alkaline error exists in high pH solutions when the hydrogen ions in
the gel layer are partially or completely substituted with alkali ions; the
Even though both Screw and T-type connectors attach directly to the
resulting pH displayed is lower than it actually should be.
meter, they can also be made interchangeable with other meters by
using a Hanna BNC extension cables.
The difference between the theoretical and measured pH is called the
alkaline error. Sodium ions are typically the ions that are responsible,
but potassium and lithium ions can also contribute to this error. In
earlier glass compositions, the alkaline error was seen to start at 9 pH.
Newer glass formulations and ones especially formulated to minimize
this error now exhibit an error starting at 12 or 13 pH.
2.112 | www.hannainst.com
pH Electrodes 2
Designed and Manufactured by Hanna
pH
Rinse off with water. During transport, air bubbles may have formed mV
Offset
inside the glass bulb. Shake down the electrode as you would with a or sample is homogenous. The
spirit filled thermometer. Condition the sensing tip; soak the pH bulb movement of the solution will also
and junction in HI70300 storage solution for at least one hour or longer. increase the response time of the
If possible, an overnight soak is best. This will hydrate a dehydrated electrode in the solution.
glass sensor and thoroughly wet a dried reference junction. pH
4 7 10
One-point Calibration
Junction pH Bulb
For one-point calibration it is
important to calibrate the pH
electrode in pH 7.0. This calibration
determines the offset value. The mV
value at pH 7.00 ideally should be 0.0. mV
Slope
Prior to placing the electrode in calibration solution, it should of two points. The second point
be thoroughly rinsed with clean, purified water to prevent any
- 177.48
electrodes
the expected value of the sample
to be tested. For example, if the
Use Fresh pH Buffer for Calibration expected value is pH 8, the electrode
The calibration of the pH electrode is only as good as the buffer used. should be calibrated using pH 7.01
Once a bottle of buffer is open, it should be discarded after six months and pH 10.01 buffer. Reference
Fill Cap
of use. To prevent cross-contamination, never pour buffer back into
the bottle. If the same buffer is to be used for multiple calibrations, it is Electrode Fill Solutions
better to pour a small amount of buffer in a separate container that can
The electrolyte level in refillable
be sealed. If using a separate container, the buffer should be changed
electrodes should be checked before
frequently (i.e. daily, weekly).
performing any calibration. If the level Good
is low (<1 cm or ½” below fill hole), refill Electrolyte
It is important to note that pH buffers at higher values (i.e. pH Level
10.01) are less stable than lower values, this is due to atmospheric with the proper electrolyte solution 1/2”
CO2 diffusing into the buffer, forming carbonic acid. If the buffer to ensure the optimum electrode
is old, the actual value might be less than stated on the bottle, performance. This simple maintenance
Refill with Proper
resulting a low slope. step helps guarantee adequate head Electrolyte Below
pressure to promote efficient and this Level
www.hannainst.com | 2.113
2 pH Electrodes
Designed and Manufactured by Hanna
the user if the offset exceeds ±8.0 mV or if the slope is less than 94%.
might not be visible to the naked eye. This growth will affect the
Electrode 1 pH 7.01 = -15 mV performance and accuracy. To minimize growth it is recommended
pH 4.01 = +160 mV to use pH 4 buffer if storage solution is not available. Solutions with
Absolute mV difference is +160 mV – (+15 mV) = +175 mV lower pH values can inhibit growth. If pH 4 buffer is not available, it is
advisable to use pH 7 buffer.
Electrode 2 pH 7.01 = +15 mV
pH 4.01 = +160 mV Never store a pH electrode in purified water as it will
Absolute mV difference is +160 mV – (-15 mV) = +145 mV dehydrate the bulb. The concentration of the fill solution is
3.5M KCl. The reference cell with this concentration generates
At 25°C pH 7.01 (offset) = ±30 mV.
a specific voltage. Placing a probe in purified water will have an
The absolute mV difference should be 150 mV
osmotic effect causing water to move into the reference cell.
(85% slope) to 186 mV (105% slope).
There will also be a higher rate of diffusion of electrolyte from
the reference cell into the water due to a concentration gradient.
Conclusion: Electrode 1 is working properly while electrode 2 has an
Both will result in a different reference electrolyte concentration,
unacceptable slope. Try cleaning and if possible replace fill solution. If
which will result in a change in the reference potential. If using a
slope is still low then replace the pH electrode.
non-refillable probe in which the reference electrolyte cannot be
changed, storage in purified water may result in premature failure
Important note: A pH 7.01 mV value outside ±30 mV is an indicator of and ultimately replacement of the electrode.
a build up/coating on the pH bulb. The electrode should be cleaned.
Inspect the electrode for any scratches or cracks on the bulb or stem.
If any are present, replace the electrode.
2.114 | www.hannainst.com
pH Electrodes 2
Designed & Manufactured by Hanna
pH
If the junction is constantly clogging due to measuring in semi
Calibrating a meter with a dirty electrode will result in inaccurate readings.
solids or viscous samples, use a pH electrode that has an open
If the mV offset continues to deviate with a properly cleaned electrode, it
junction design or cloth junction. The open junction design of the
is a good indication that the electrode may need to be replaced.
FC200 resists clogging, while those with a cloth junction can have
the junction extracted, effectively renewing the junction.
electrodes
Improper calibration – Make sure that pH electrode was rinsed with
Soak in Hanna HI7061 General Cleaning Solution for approximately 30 purified water between buffers to prevent cross-contamination and
minutes to dissolve mineral deposits and other general coatings. the electrode is at thermal equilibrium with the buffer.
Protein Coating Check offset and slope of electrode. Offset mV value in pH 7.0 should
Soak in Hanna HI7073 Protein Cleaning Solution for 15 minutes to be ±30 mV; if outside of this range, try cleaning the electrode. Slope
enzymatically dissolve deposits from protein sources. (difference in mV from pH 7.0 to pH 4.0) must be greater than 150 mV
(85%). If the slope is less than 85% then use fresh buffers, change fill
Inorganic Soak
solution, and clean electrode. If the slope cannot be increased to an
Soak in Hanna HI7074 Inorganic Cleaning Solution for 15 minutes. acceptable value, replace electrode.
This cleaner is especially effective at removal of precipitates caused
by reaction with the silver in the filling solution that may form on a
ceramic junction. Important note: A low slope can be due to a bad buffer. If
calibrating to pH 7 and 10, it is possible that pH 10 buffer is no
Oil and Grease Rinse longer valid. pH 10 buffer is susceptible to diffusion of CO₂ from
the air. When this happens, the pH 10 buffer will have a lower pH
Oil and grease removal require the correct chemicals to solubilize the
value and result in a low slope percentage value. Tracking the
coating, but are mild enough to leave the electrode unaffected. Use
mV values of the buffer by writing the value on the bottle when
Hanna HI7077 Oil and Fat Cleaning Solution.
opened is a way to have a reference point of a good buffer.
www.hannainst.com | 2.115
2 pH Electrodes
Designed and Manufactured by Hanna
an accurate pH measurement—Noise from rectifiers in plating between this solution and an inert metal sensor immersed in the
baths, motors or pumps can interfere with the high impedance solution, and the voltage can be measured (when compared to a
measuring circuit. reference electrode) with a pH/mV meter. This type of measurement
is known as redox or ORP. The units of measurement are in mV. At a
pH Electrode has a Short Life Span (< 6 months) glance, an ORP electrode may look very similar to a pH electrode. Like
a combination pH electrode, both the sensor and the reference are
Elevated temperatures reduce the life span of pH electrodes. At room housed in a common body.
temperature (25°C) a pH electrode will typically last 1 to 2 years. A
general rule is that for every 25°C increase the electrode life will The scale of measurement may be positive (indicating oxidizing
decrease by ½. Temperature cycling has the most detrimental effect. potential) or negative (indicating reducing). It should be noted that
when zero mV is observed, it is really an oxidizing situation because
Operating Temperature Average Lifespan
the reference voltage (~200 mV for an Ag/AgCl with KCl electrolyte)
25°C 1 to 2 years
is included in the observed mV value. In some cases the user may wish
50°C 6 to 12 months
to offset the reading to remove the reference contribution. The mV is
75°C 3 to 6 months
then said to be approaching the absolute mV scale that references a
100°C <1 month
SHE (standard hydrogen electrode). This type of calibration is called
relative mV calibration.
If measuring samples at temperatures greater than 50 °C, use a pH
electrode with high temperature (HT) glass such as the HI1043. An ORP sensor must be chemically inert; it cannot be oxidized or
reduced itself. It must also have the proper surface characteristics to
Storing a pH electrode in purified water will shorten the life span
promote rapid electron exchange, a property known as high exchange
of pH electrode—If using a refillable pH electrode, replace fill solution;
electrodes
current density. Two noble metals have proven to work well for this
if using a gel-filled electrode, the electrode will have to be replaced.
purpose: pure platinum and pure gold are both used in the construction
Store in storage solution.
of ORP sensors.
An ORP system does not have a high impedance source (like a pH bulb),
but is a potentiometric device that produces a voltage. It also uses
similar cables, connectors and calibration solutions. For this reason, a
Wiping a pH electrode with tissue will harm an electrode—It is high impedance electronic meter (pH) with many user friendly features
important to blot a pH electrode. Wiping the electrode can produce a are a benefit for this measurement also.
static charge on the sensor that will destabilize the measurement thus
requiring additional time before stable measurements can be obtained. Because of the close relationship between pH and ORP, there is a
scale that takes into account the ratio (mV) ORP/pH, the rH scale. The
rH range varies from 0 to 42, where the extreme values represent
Solutions with hydrofluoric acid will dissolve the glass at a pH less
than pH 5. Use electrodes with HF resistant glass. The HI1143 will the reducing effect of an atmosphere of pure hydrogen (rH=0) and
resist HF up to 2 g/L @ pH 2 and temperatures less than 60°C. to the oxidizing effect of an atmosphere of pure oxygen (rH=42),
respectively.
2.116 | www.hannainst.com
pH Electrodes 2
Designed and Manufactured by Hanna
pH
be recalibrated.
Smart Electrodes
With models that feature our SMART circuitry, an exclusive microchip
embedded inside the electrode retains the calibration data and
The formula for obtaining the rH value is as follows:
assigns an identity code to the host unit. As soon as the electrode
mV is connected to a pH meter in the SMART series, it is recognized and
rH= -2 pH its characteristics retrieved. The meter then uses the accessed
0.0992 (273.15 + Tc)
calibration data as a reference for future measurements. Once
each SMART electrode is calibrated, these electrodes can be used
In this equation, where T is the temperature (°C) of the sample, mV is
the ORP (mV) reading, and pH is the pH value of the sample. in succession without requiring new calibration. Hanna’s SMART
electrodes help eliminate errors and save time when working
The rH scale is not used in the instruments available on the market. with more than one electrode.
A direct mV reading from the electrode is preferred, within the
±2000 mV range, without compensation/correlation with the pH/
Pre-amplified Electrodes
temperature value.
Integral pre-amplifiers are encapsulated in this series of Hanna’s pH
ORP Applications electrodes. The pre-amplifier converts the high impedance signal from
the pH glass to a low impedance signal; this allows the user to use
electrodes
ORP measurements are based on the potential difference measured
long runs of sensor cable with ordinary connectors without noise or
between the platinum or gold electrode and a reference electrode.
voltage drops that result in erroneous measurements.
The identical reference system utilized for the pH electrode (Ag/AgCl)
is also used for redox measurements.
Clogging Prevention System (CPS™)
Redox electrodes are used to monitor many chemical processes
particularly those involving reversible reactions. Common applications Conventional pH electrodes use ceramic junctions that may clog
include the following: quickly when used in biological samples, such as wine or must. When
the junction is blocked, the entire electrode will not function properly.
Industrial Wastewater Treatment Electrodes that feature CPS technology utilize a ground glass/
PE sleeve junction which controls a steady, predictable flow of fill
The redox systems used in water treatment are the reduction of
solution, thus keeping the junction open. The hydrophobic property
chromates and oxidation of cyanides. Waste hexavalent chromium is
of PE sleeve repels wetness and coatings.
reduced to trivalent chromium by the addition of sodium bisulfite or
sulphur dioxide. In the case of cyanide, chlorine or sodium hypochlorite
is used to oxidize the cyanide, followed by the hydrolysis of cyanate to Sensor Check™ for edge® Meters
ammonia and carbon dioxide.
When used with Hanna’s electrodes equipped with a matching pin,
edge constantly checks the impedance of the pH measuring electrode
Water Sanitation to notify the user, in real-time, in the event of glass breakage. During
ORP measurements are being increasingly used as an effective calibration, Sensor Check also verifies the state of the junction.
measure of the sanitizing activity in pool, spa and potable water. The
kill time of E. coli bacteria in water depends on the ORP value. ORP is
Titanium Casings
a reliable indicator of bacteriological water quality. Water having an
ORP value equal to or higher than 650 mV are well within accepted Our electrodes that feature titanium bodies offer durability and
sanitization levels for pool and spa waters. shielding that is required in many industrial applications.
www.hannainst.com | 2.117
2 pH Electrode Application Guides
Abbreviation Guide
Spheric (S) Glass (G)
Viscolene Electrolyte
Temperature Sensor
KCl 3.5M Electrolyte
Double Reference
Single Reference
Ceramic Junction
Gel Electrolyte
Pressure (Bar)
Open Junction
Cloth Junction
Body Material
Tip Shape
Refillable
Amplifier
SMART
Application Recommended Electrodes Page
HI1043B/P S G • • • • 0.1 2.122
Acids, Strong
HI10430* S G • • • • • • • 0.1 2.129
FC214D S M • • • • • 3 2.134
2.118 | www.hannainst.com
pH Electrode Application Guides 2
Abbreviation Guide
Viscolene Electrolyte
Conic (C) Plastic (P)
Temperature Sensor
KCl 3.5M Electrolyte
Flat (F)
Double Reference
Single Reference
Ceramic Junction
Gel Electrolyte
Pressure (Bar)
Open Junction
Cloth Junction
Body Material
Tip Shape
Refillable
Amplifier
SMART
Application Recommended Electrodes Page
FC202D, FC2023, FC2053 C P • • • • • • 0.1 2.134
Food, Semi-solid
FC200B/D C P • • • 0.1 2.132
pH
Fruit Juices, Organic
FC911B S P • • • • • 0.1 2.134
Frozen, Semi FC230B C P • • • 0.1 2.133
FC200B/D C P • • • 0.1 2.132
Ham and Sausages FC202D, FC2023, FC2053 C P • • • • • 0.1 2.134
FC230B C P • • • 0.1 2.133
Humidity, High FC911B S P • • • • • 0.1 2.134
HI1043B/P S G • • • • 0.1 2.122
Hydrocarbons
HI10430* S G • • • • • • • 0.1 2.129
electrodes
FC230B C P • • • 0.1 2.133
FC400B C P • • • 0.1 2.133
Meats FC232D, FC2323 C P • • • • • 0.1 2.135
FC202D, FC2023, FC2053 C P • • • • • • 0.1 2.134
FC2320* C P • • • • • • 0.1 2.130
HI1135B S G • • • • 3 2.123
Monitoring, Continuous
HI1611D S G • • • • • 2 2.127
Unsure about which electrode to choose? Give your local Hanna office a call for assistance. www.hannainst.com | 2.119
2 pH Electrode Application Guides
Temperature Sensor
KCl 3.5M Electrolyte
Double Reference
Abbreviation Guide
Single Reference
Ceramic Junction
Gel Electrolyte
Pressure (Bar)
Open Junction
Cloth Junction
Body Material
Spheric (S) Glass (G)
Tip Shape
Refillable
Amplifier
Conic (C) Plastic (P)
SMART
Flat (F) Metal (M)
2.120 | www.hannainst.com Unsure about which electrode to choose? Give your local Hanna office a call for assistance.
ORP Electrode Application Guides 2
Temperature Sensor
KCl 3.5M Electrolyte
Abbreviation Guide
Double Reference
Single Reference
Ceramic Junction
Gel Electrolyte
Pressure (Bar)
Open Junction
Cloth Junction
Body Material
Platinum (Pt) Glass (G)
Gold (Au) Plastic (P)
Refillable
Amplifier
SMART
Sensor
Application Recommended Electrodes Page
HI3131B/P Pt G • • • • 0.1 2.126
HI3618D, HI36183 Pt G • • • • • • 0.1 2.126
Laboratory (General Use)
HI36180* Pt G • • • • • • • 0.1 2.131
pH
HI36200* Pt P • • • • • • 2 2.131
Oxidants HI4430B Au P • • • 2 2.128
Ozone HI4430B Au P • • • 2 2.128
Quality Control HI3230B Pt P • • • 2 2.128
Titrations, ORP HI3131B/P Pt G • • • • 0.1 2.126
Water, Municipal HI3230B Pt P • • • 2 2.128
Must in Winemaking HI3148B Pt G • • • • 0.1 2.135
*edge® specific electrode
Abbreviation Guide
Ceramic Junction
Cylindric (C) Plastic (P)
Pressure (Bar)
Body Material
ORP Half Cell
Platinum (Pt)
electrodes
pH Half Cell
Reference
Tip Shape
Gold (Au)
Unsure about which electrode to choose? Give your local Hanna office a call for assistance. www.hannainst.com | 2.121
2 Combination Electrodes
pH
163.5 mm
175.5 mm
175.5 mm
175.5 mm
120 mm
120 mm
120 mm
120 mm
09 mm 03 mm
012 mm 012 mm 012 mm
electrodes
Junction / Flow Rate ceramic, double / 30-40 µL/h ceramic, triple / 40-50 µL/h ceramic, triple / 40-50 µL/h open
Max Pressure 0.1 bar 0.1 bar 0.1 bar 0.1 bar
Tip /Shape spheric (dia: 9.5 mm) conic (12 x 12 mm) conic (12 x 12 mm) spheric (dia: 3 mm)
Amplifier no no yes no
fats and creams, high purity water, fats and creams, high purity water,
hydrocarbons, paints, solvents, sea
soil samples, potable water, soil samples, potable water,
Recommended Use water, strong acids and bases, high biotechnology, samples < 100 µL
semi-solid products, low conductivity semi-solid products, low conductivity
conductivity samples, tris buffer
solutions, emulsions solutions, emulsions
* For pH meters with CAL Check™ system * For pH meters with CAL Check system * For pH meters with CAL Check system
2.122 | www.hannainst.com Unsure about which electrode to choose? Give your local Hanna office a call for assistance.
Combination Electrodes 2
pH
193.5 mm
193.5 mm
175.5 mm
175.5 mm
150 mm
150 mm
120 mm
120 mm
09 mm 09 mm
012 mm 012 mm
09 mm
electrodes
012 mm
03 mm
Junction / Flow Rate open ceramic, single / 15-20 µL/h ceramic, single / 15-20 µL/h ceramic, double / 30-40 µL/h
Max Pressure 0.1 bar 0.1 bar 0.1 bar 3 bar with back pressure
Tip /Shape spheric (dia: 3 mm) spheric (dia: 9.5 mm) spheric (dia: 9.5 mm) spheric (dia: 9.5 mm)
Temperature Sensor no no no no
Amplifier no no no no
HI1131B BNC
Connection HI1093B BNC HI1151B BNC HI1135B BNC
HI1131P BNC + pin*
www.hannainst.com | 2.123
2 Combination Electrodes
pH
163.5 mm
175.5 mm
265.5 mm
120 mm
120 mm
210 mm
09 mm
012 mm 012 mm
electrodes
08 mm
Junction / Flow Rate ceramic, single / 15-20 µL/h ceramic, single / 15-20 µL/h ceramic, single / 15-20 µL/h
Tip /Shape spheric (dia: 9.5 mm) spheric (dia: 7.5 mm) spheric (dia: 7.5 mm)
Temperature Sensor no no no
Amplifier no no no
samples with fluoride (max 2 g/L @ pH 2 field applications, soil solution, photographic
Recommended Use specific for flasks
and temperature < 60°C) chemicals, laboratory (general use)
2.124 | www.hannainst.com
Combination Electrodes 2
pH
012 mm
130.5 mm
175.5 mm
175.5 mm
175.5 mm
120 mm
120 mm
120 mm
80 mm
75 mm
6 mm
09 mm
012 mm 05 mm 012 mm
electrodes
Code HI1144B HI1330[ ] HI1343B HI2031B
refillable, combination pH electrode refillable, conical tip combination
Description refillable, combination pH electrode combination pH electrode
with calomel references pH electrode
Reference single, Hg/Hg₂Cl₂ single, Ag/AgCl single, Hg/Hg2 Cl2 single, Ag/AgCl
Junction / Flow Rate ceramic / 15-20 µL/h ceramic, single / 15-20 µL/h ceramic, single / 15-20 µL/h ceramic, single / 15-20 µL/h
Electrolyte KCl 3.5M KCl 3.5M + AgCl KCl 3.5M KCl 3.5M + AgCl
Max Pressure 0.1 bar 0.1 bar 0.1 bar 0.1 bar
Tip /Shape spheric (dia: 9.5 mm) spheric (dia: 5 mm) spheric (dia: 7.5 mm) conic (6 x 10 mm)
Temperature Sensor no no no no
Amplifier no no no no
Recommended Use tris buffer specific for vials and test tubes specific for Tris buffer dairy and semi-solid products
HI1330B BNC
Connection HI1144B BNC HI1343B BNC HI2031B BNC
HI1330P BNC + pin*
* For pH meters with CAL Check™ system
www.hannainst.com | 2.125
Tips for the Most
2 Special pH and ORP Electrodes Accurate Measurements
Keep Electrode Hydrated
Ideally, pH electrodes should be kept in a
storage solution when not in use. Placing the
electrode in a small glass filled with storage
solution is suitable. An option for pocket
meters is to place a small piece of sponge into
the meter’s cap and pour storage solution
into the cap to wet the sponge. Pouring off
any excess solution beforehand, the cap can
then be placed on the meter.
153.5 mm
175.5 mm
120 mm
110 mm
junction clogging and to maintain accuracy.
Immerse the electrode in the proper cleaning
solution for at least 15 to 20 minutes. Hanna
offers a wide range of cleaning solutions for
general purpose and specific applications.
Additional Tips
012 mm
• Calibration and storage solutions should
electrodes
Code HI3131B HI3618D/HI36183 HI1217D • Calibrate the meter often if a high degree
of accuracy is required.
refillable combination
Description ORP combination electrode pH electrode
ORP electrode • Remember that the calibration is as only
Reference single, Ag/AgCl single, Ag/AgCl single, Ag/AgCl as good the buffer being used (i.e. old or
Junction / Flow Rate ceramic, single / 15-20 µL/h ceramic, single / 15-20 µL/h ceramic, single
contaminated buffer may not have the
same value on the label).
Electrolyte KCl 3.5M + AgCl KCl 3.5M + AgCl gel
Max Pressure 0.1 bar 0.1 bar 2 bar • Single-use calibration sachets, as opposed
Range ORP: ±2000 mV ORP: ±2000 mV pH: 0 to 13
to bottles, ensure that your buffer solution
is always fresh.
Recommended -5 to 70°C -5 to 70°C 0 to 70°C
Operating Temp. (23 to 158°F) (23 to 158°F) (32 to 158°F) - GP • If the meter takes an unusually long time
Tip /Shape platinum pin platinum pin spheric (dia: 5.0 mm)
to get a stable reading, the junction may
be clogged.
Temperature Sensor no yes yes
Amplifier no yes yes • Rinse the probe with purified water after
Body Material glass glass PEI
each use.
2.126 | www.hannainst.com
pH Electrodes with Temperature Sensor 2
pH
163.5 mm
175.5 mm
175.5 mm
120 mm
120 mm
120 mm
09 mm
012 mm 012 mm 012 mm
electrodes
Code HI1610D HI1611D HI1612D
Description pH electrode pH electrode pH electrode
Junction / Flow Rate ceramic, single / 15-20 µL/h ceramic, single ceramic, triple / 40-50 µL/h
Tip /Shape spheric (dia: 9.5 mm) spheric (dia: 9.5 mm) conic (12 x 12 mm)
Recommended Use laboratory general use continuous monitoring emulsions, semi-solid samples
www.hannainst.com | 2.127
2 Rugged pH and ORP Electrodes
pH
163.5 mm
163.5 mm
175.5 mm
120 mm
120 mm
120 mm
012 mm 012 mm 012 mm
electrodes
Junction / Flow Rate ceramic, single / 15-20 µL/h ceramic, single ceramic, single
Tip /Shape spheric (dia: 7.5 mm) platinum pin gold pin
Temperature Sensor no no no
Amplifier no no no
HI1332B BNC
Connection HI1332P BNC + pin* HI3230B BNC HI4430B BNC
HI1332D DIN
2.128 | www.hannainst.com
Digital Electrodes 2
Sensor
Check™
pH
175.5 mm
175.5 mm
175.5 mm
193 mm
120 mm
120 mm
120 mm
120 mm
09 mm 09 mm 09 mm
012 mm 012 mm 012 mm 012 mm
electrodes
Code HI11310 HI11311 HI10530 HI10430
refillable, combination, refillable, combination, digital refillable, combination, digital refillable, combination, digital
Description
digital pH electrode pH electrode w/ Sensor Check™ pH electrode with conical tip pH electrode with double junction
Junction ceramic, single / 15-20 µL/h ceramic, single / 15-20 µL/h ceramic, triple / 40-50 µL/h ceramic, triple / 40-50 µL/h
Max Pressure 0.1 bar 0.1 bar 0.1 bar 0.1 bar
Tip /Shape spheric (dia: 9.5 mm) spheric (dia: 9.5 mm) conic (12 x 12 mm) spheric (dia: 9.5 mm)
Connection HI11310 3.5 mm connector HI11311 3.5 mm connector HI10530 3.5 mm connector HI10430 3.5 mm connector
www.hannainst.com | 2.129
2 Digital Electrodes
80 mm
pH
163.5 mm
175.5 mm
115.5 mm
164 mm
120 mm
120 mm
48 mm
75 mm
6 mm
36 mm
07.5 mm
012 mm 06 mm 012 mm
electrodes
Max Pressure 0.1 bar 0.1 bar 0.1 bar 0.1 bar
Tip /Shape dome (dia: 8 mm) conic (6 x 10 mm) conic (12 x 12 mm) conic (6 x 10 mm)
Matching Pin no no no no
Connection HI10480 3.5 mm connector FC2320 3.5 mm connector FC2100 3.5 mm connector FC2020 3.5 mm connector
2.130 | www.hannainst.com
Digital Electrodes 2
Sensor
Check™
pH
163.5 mm
163.5 mm
175.5 mm
181 mm
120 mm
120 mm
120 mm
120 mm
012 mm 012 mm 012 mm 012 mm
electrodes
Code HI12300 HI12301 HI36180 HI36200
Description combination, digital pH electrode combination, digital pH electrode refillable, ORP digital probe ORP digital probe
Junction / Flow Rate ceramic, single / 15-20 µL/h ceramic, single / 15-20 µL/h ceramic, single / 15-20 µL/h ceramic, single
Tip /Shape spheric (dia: 7.5 mm) spheric (dia: 7.5 mm) platinum pin platinum pin
Recommended Use field applications field applications laboratory general purpose field applications
Connection HI12300 3.5 mm connector HI12301 3.5 mm connector HI36180 3.5 mm connector HI36200 3.5 mm connector
www.hannainst.com | 2.131
2 Electrodes for the Food Industry
pH
175.5 mm
111.5 mm
160 mm
160 mm
120 mm
120 mm
120 mm
75 mm
6 mm
Junction / Flow Rate ceramic, single / 15-20 µL/h ceramic, single / 15-20 µL/h open open
Max Pressure 0.1 bar 0.1 bar 0.1 bar 0.1 bar
Tip /Shape spheric (dia: 7.5 mm) spheric (dia: 7.5 mm) conic (6 x 10 mm) conic (12 x 12 mm)
Amplifier no yes no no
2.132 | www.hannainst.com
Electrodes for the Food Industry 2
Handle: 100 mm
80 mm
pH
175.5 mm
111.5 mm
164 mm
150 mm
120 mm
48 mm
75 mm
6 mm
36 mm
AISI stainless
steel sheath
09 mm
FC098 and FC099 stainless steel 6 mm
012 mm
blades for meat penetration (optional) 05 mm
electrodes
Code FC220B FC230B FC240B FC400B
combination pH electrode combination pH electrode
Description pH electrode pH electrode
with PVDF outer body with stainless steel sheath
Junction / Flow Rate ceramic, triple / 40-50 µL/h open open open
Max Pressure 0.1 bar 0.1 bar 0.1 bar 0.1 bar
Tip /Shape spheric (dia: 9.5 mm) conic (6 x 10 mm) conic (3 x 5 mm) conic (6 x 10 mm)
Temperature Sensor no no no no
Amplifier no no no no
penetration, cheese,
Recommended Use creams, fruit juices, sauces meat, semi frozen products penetration, meat
quality control
www.hannainst.com | 2.133
2 Electrodes for the Food Industry
pH
145.5 mm
150.5 mm
175.5 mm
130 mm
130 mm
105 mm
110 mm
120 mm
75 mm
75 mm
6 mm 6 mm
CPS™
(Clogging 014 mm
Prevention
System)
07.5 mm
012 mm
012 mm
Reference double, Ag/AgCl double, Ag/AgCl double, Ag/AgCl double, Ag/AgCl single, Ag/AgCl
ceramic, single /
Junction / Flow Rate CPSTM open open cloth
15-20 µL/H
Max Pressure 0.1 bar 0.1 bar 0.1 bar 0.1 bar 3 bar
Tip /Shape dome (dia: 8 mm) spheric (dia: 7.5 mm) conic (6 x 10 mm) conic (6 x 10 mm) spheric (dia: 5 mm)
Body Material glass PVDF PVDF PVDF titanium with HT glass sensor
Cable coaxial; 1 m (3.3’) coaxial; 1 m (3.3’) 7-pole; 1 m (3.3’) 7-pole; 1 m (3.3’) 7-pole; 1 m (3.3’)
HI1048B BNC
FC202D DIN *
HI1048B/50 BNC (.4 m (1.3') cable) FC2053 Quick Connect
Connection FC911B BNC FC2023 Quick Connect FC214D DIN†
HI1048P BNC + pin* DIN **
DIN **
HI1048D DIN**
* For pH meters with CAL Check™ system * Recommended for use with ** Recommended for use with
** Recommended for use with HI99111 pH meter HI99161 pH meter HI98161 pH meter
** Recommended for use with
HI98161 pH meter
2.134 | www.hannainst.com
Electrodes for the Food Industry 2
Handle: 100 mm
80 mm
CPS™
(Clogging
Prevention
System)
pH
163.5 mm
175.5 mm
164 mm
150 mm
120 mm
120 mm
48 mm
36 mm
AISI stainless
steel sheath
electrodes
Code FC232D/FC2323 HI3148B FC213D/FC2133 FC242D/FC2423
pre-amplified pH / pre-amplified pH /
Description pH electrode ORP electrode
temperature probe temperature probe
Max Pressure 0.1 bar 0.1 bar 0.1 bar 0.1 bar
* Recommended for use with HI99163 pH meter * Recommended for use with HI99164 pH meter * Recommended for use with HI99165 pH meter
** Recommended for use with HI98163 pH meter ** Recommended for use with HI98164 pH meter ** Recommended for use with HI98165 pH meter
www.hannainst.com | 2.135
2 Electrodes for Specific Analysis
93.5 mm
pH
50 mm
153.5 mm
153.5 mm
175.5 mm
120 mm
110 mm
110 mm
012 mm
012 mm 012 mm
012 mm
electrodes
Max Pressure 0.1 bar 0.1 bar 0.1 bar 0.1 bar
Connection HI1413B BNC HI1414D 7-pin DIN* HI1414D/50 DIN† HI1292D 7-pin DIN**
* Recommended for use with HI99171 pH meter † Recommended for use with HI99181 ** Recommended for use with HI99121
pH meter pH meter
2.136 | www.hannainst.com
Electrodes for Specific Analysis 2
pH
145.5 mm
145.5 mm
175.5 mm
175.5 mm
105 mm
105 mm
120 mm
120 mm
014 mm 014 mm
09 mm
012 mm 012 mm
electrodes
Code HI1294D FC215D HI1296[ ] HI1297D
Description pH electrode pH electrode pH electrode pH/ORP electrode
HI1296D DIN**
Connection HI1294D DIN** FC215D DIN* HI1297D DIN‡
HI12963 Quick Connect DIN†
** Recommended for use with HI9814 ** Recommended for use with ‡ Recommended for use with HI991002 and
GroLine multiparameter meter HI991001 pH meter HI991003 pH meters
†Quick connect DIN. For use with
HI98190 pH meter only
www.hannainst.com | 2.137
2 Electrodes for Specific Analysis
Electrode
pH
Extension Cables
160.5 mm
150.5 mm
120 mm
110 mm
Description
3.0 mm (0.12’’) cable with screw type and BNC
connectors
014 mm
HI7855/3 3 m (9.9’)
electrodes
HI7855/5 5 m (16.5’)
HI7855/10 10 m (33’)
Code HI62911D HI72911[ ]
HI7855/15 15 m (49.5’)
Description pH electrode pH electrode
HI7858/10 10 m (33’)
HI72911D DIN**
Connection HI62911D DIN*
HI72911B BNC + phono†
* Recommended for use with HI99131 pH meter ** Recommended for use with HI99141 pH meter
† Recommended for use with HI98191 pH meter
2.138 | www.hannainst.com
Half-Cells 2
pH
163.5 mm
163.5 mm
163.5 mm
163.5 mm
163.5 mm
120 mm
120 mm
120 mm
120 mm
120 mm
09 mm 09 mm
012 mm 012 mm 012 mm 012 mm 012 mm
electrodes
Code HI2111B HI2112B FC260B HI3133B HI5110B
Description pH half-cell pH half-cell pH half-cell ORP half-cell ORP half-cell
Tip /Shape spheric (dia: 9.5 mm) spheric (dia: 7.5 mm) spheric (dia: 9.5 mm) platinum pin cylindric (dia: 3 mm)
www.hannainst.com | 2.139
2 Reference Electrodes
pH
163.5 mm
163.5 mm
175.5 mm
175.5 mm
120 mm
120 mm
120 mm
120 mm
012 mm 012 mm 012 mm 012 mm
electrodes
Reference single, Hg/Hg2 Cl2 double, Ag/AgCl double, Ag/AgCl single, Hg/Hg2 Cl2
Junction / Flow Rate ceramic, single / 15-20 µL/h ceramic, single / 15-20 µL/h ceramic, double ceramic, double
Max Pressure 0.1 bar 0.1 bar 3 bar with back pressure 3 bar with back pressure
2.140 | www.hannainst.com
Reference Electrodes 2
pH
163.5 mm
175.5 mm
175.5 mm
120 mm
120 mm
electrodes
Code HI5413 HI5312 HI5313
Description reference electrode reference electrode reference electrode
Recommended Use samples with suspended solids titrations, samples with suspended solids titrations, samples with suspended solids
www.hannainst.com | 2.141
2 pH and ORP Solutions
Ready-made Solutions
Buffer solutions that can be prepared in small
batches from capsules, tablets or powders,
are called “fresh” because they are prepared
at the time of use. They are considered to
be, but are not very precise. The quality of
Hanna seal of freshness buffer solutions produced depends on many
Our air tight bottle with tamper-proof factors including the quantity and quality
seal of freshness ensures quality. of the chemicals and distilled water used in
production. Other important factors are the
temperature and the instruments used to
prepare them.
pH
Certified Solutions
For those operators who request it, we
provide standard solutions complete with
certificate of analysis. These certificates are
prepared in accordance with NIST standards
to avoid any possible error in determining
the actual pH value. The certificate shows
the date of production, batch number and
Table of Reference expiration date.
Temperatures
All calibration solution bottles are provided Safety Data Sheets
with a label presenting a reference table of
Download Safety Data Sheets (SDS) from our
the relationship between pH or conductivity
website at: www.hannainst.com.
values and temperature.
2.142 | www.hannainst.com
pH and ORP Solutions 2
pH
solutions
Sachets are Practical,
Safe and Ready-to-Use
Single-use sachets are quick and easy to use.
Each sealed, light-tight sachet holds just the
right amount of solution. Every time your
instrument and probe is maintained using
Hanna sachets, it is like using a newly opened
bottle of solution.
Table of Reference
Temperatures
A label presenting a reference table of the
relationship between pH or conductivity
values and temperature is printed on all
calibration solution sachets.
www.hannainst.com | 2.143
2 Electrode Cleaning, Calibration and Maintenance
1 hour
pH 7 pH 7 pH 7 pH 7
contaminate solutions.
Always use fresh solutions with each
Oil and Grease Rinse
calibration. Buffer solutions can be Oil and grease removal require the correct chemicals to solubilize the
contaminated by dirty electrodes coating, but mild enough to leave the electrode unaffected. Use Hanna
as in Fig. C. Always clean your HI7077 or HI8077 Oil and Fat Cleaning Solution.
electrode before each calibration
and measurement, and always use
fresh solutions.
Step 2: Calibration
Contamination can take time to work
its way around the beaker. If you Fig D. Calibration only counts
notice fluctuations in your readings, when using fresh
it may be time to calibrate with fresh
solutions. solutions and properly
cleaned electrodes.
Fresh Every Time A pH electrode that is properly
Hanna single-use sachets are a manufactured and kept clean will
great way to ensure your solution is retain its measuring integrity for a
always fresh. Fig. D shows just how long time. As a result of many factors
easy it is to tear open the packet and such as age, use, poor maintenance
insert the electrode. These light-tight sachets are also the ideal size or improper handling, any electrode Routine maintenance will ensure
for testers. accurate readings while extending
will lose its integrity in time.
the life of your electrode.
2.144 | www.hannainst.com
pH and ORP Solutions 2
pH
properly cleaned electrode. Calibrating a meter with a dirty electrode
will only compound the problem. An mV offset that continues to
deviate with a properly cleaned electrode is a good indication that the
electrode may need to be replaced.
Fig G.
solutions
Electrode 2 has not been properly cleaned. Fig H
Storage
To ensure an optimum response time, the glass sensor tip and the
Electrode readings may vary with reference junction of the pH electrode should be kept moist and not
insufficient cleanings. be allowed to dry out.
Conventional pH meters do not warn the user when a pH electrode is NOTE: Never store the electrode in distilled or deionized water.
dirty or when a solution may be contaminated. A common example of
this occurs just after calibrating the instrument; the pH electrode is
immersed into the pH 7 buffer and the reading is lower than expected
(pH 6.8 or 6.9 instead of pH 7). Hanna meters that feature our exclusive
CAL Check™ electrode diagnostics automatically alert the user of any
potential electrode or solution problems during calibration.
www.hannainst.com | 2.145
2
pH
HI5000 Series
solutions
• Air-tight bottles
These solutions are dedicated to applications that require extremely
·· Air tight bottle with tamper-proof seal
accurate pH monitoring, and come with a certificate of analysis
of freshness to ensure quality.
prepared by comparison against NIST standards.
• Single use sachets
·· Light block packaging prevents oxidation from Also available are solution bottles that are colored according to a given
UV light that could alter the value. Every sachet standard calibration value: HI5004-R (Red), HI5007-G (Green) and
is as fresh as the day it was packaged. HI5010-V (Violet).
2.146 | www.hannainst.com
Table of Reference
Temperatures 2
HI5000 calibration solutions
are provided with a label
presenting a reference table
of the relationship between
pH or conductivity values
and temperature.
pH
Bottles Sachets
pH Value Certificate pH Value Certificate
@25°C Code Package of Analysis @25°C Code Package of Analysis
1.00 HI5001 500 mL • 1.00 HI50001-02 20 mL (25) •
1.68 HI5016 500 mL • 1.68 HI50016-01 20 mL (10) •
2.00 HI5002 500 mL • 1.68 HI50016-02 20 mL (25) •
2.00 HI5002-01 1L • 2.00 HI50002-02 20 mL (25) •
3.00 HI5003 500 mL •
3.00 HI50003-02 20 mL (25) •
4.01 HI5004 500 mL •
4.01 HI50004-01 20 mL (10) •
4.01 HI5004-01 1L •
4.01 HI50004-02 20 mL (25) •
500 mL
4.01 HI5004-R • 5.00 HI50005-02 20 mL (25) •
(color coded solution)
6.86 HI50068-02 20 mL (25) •
1 G (3.78 L) (2)
4.01 HI5004-R08 •
(color coded solution) 7.01 HI50007-01 20 mL (10) •
solutions
6.86 HI5068 500 mL • 10.01 HI50010-01 20 mL (10) •
7.01 HI5007 500 mL • 10.01 HI50010-02 20 mL (25) •
7.01 HI5007-01 1L •
11.00 HI50011-02 20 mL (25) •
500 mL
7.01 HI5007-G • 12.00 HI50012-01 20 mL (10) •
(color coded solution)
12.00 HI50012-02 20 mL (25) •
1 G (3.78 L) (2)
7.01 HI5007-G08 • 12.45 HI50124-02 20 mL (25) •
(color coded solution)
www.hannainst.com | 2.147
HI6000 Series
2 ±0.002 pH Millesimal
Calibration Solutions
• Supplied with Certificate of Analysis
• Accuracy of ±0.002 pH @ 25°C
• Safety Data Sheets
·· Safety data sheets for all Hanna
solutions are available at hannainst.
com or upon request.
• Expiration date
·· The production batch number, expiration
date, and temperature correlation table are
reported on all Hanna calibration solutions.
• NIST traceability
·· Standardized using a meter and specially
pH
Bottles Sachets
pH Value Certificate pH Value Certificate
solutions
2.148 | www.hannainst.com
Quick Cal 2
pH/EC Quick Cal Calibration
Solution
Quick Cal is for use with Hanna’s GroLine pH
and/or EC/TDS meters. Using the Quick Cal
function found in compatible meters allows
for single-point calibration for pH and/or
conductivity sensors.
pH
• Safety Data Sheets
·· Safety data sheets for all
Hanna solutions are available at
hannainst.com or upon request.
• Expiration date
·· The production batch number,
expiration date, and temperature
correlation table are reported on
all Hanna calibration solutions.
• NIST traceability
·· Standardized using a pH meter
calibrated by means of two standard
solutions prepared from NIST standard
reference materials. A conductivity
meter and probe calibrated against
NIST primary standard solutions or
primary standard solutions prepared
following NIST guidelines.
solutions
• Air-tight bottles
·· Air tight bottle with tamper-proof
seal of freshness to ensure quality.
• Single use sachets Quick Cal pH/EC Bottles Quick Cal pH/EC Sachets
·· Light block packaging prevents Certificate Certificate
oxidation from UV light that could Code Size of Analysis Code Size of Analysis
alter the value. Every sachet is as
HI5036-050 500 mL (GroLine) • 20 mL sachets,
fresh as the day it was packaged. HI50036P
25 pcs. (GroLine)
•
HI5036-023 230 mL (GroLine) •
www.hannainst.com | 2.149
2 pH Buffer Solutions
• Safety Data Sheets
·· Safety data sheets for all
Hanna solutions are available at
hannainst.com or upon request.
• Expiration date
·· The production batch number,
expiration date, and temperature
correlation table are reported on
all Hanna calibration solutions.
• NIST traceability
·· Standardized using a pH meter
calibrated by means of two standard
solutions prepared from NIST
standard reference materials.
pH
• Air-tight bottles
4.01 pH @ 25°C - Bottles
·· Air tight bottle with tamper-proof
seal of freshness to ensure quality. Code Size FDA Bottle Certificate of Analysis
HI8004L 500 mL • •
4.01 pH Buffer Solution HI8004L/C 500 mL • •
This buffer value is widely used in water
purification plants, in the food industry, and
wherever the pH is expected to be slightly 4.01 pH @ 25°C - Sachets
acidic.
Code Size Package Certificate of Analysis
HI70004C 20 mL 25 pcs. •
HI70004P 20 mL 25 pcs.
HI77400P 20 mL 10 pcs., 5 ea
2.150 | www.hannainst.com
pH Buffer Solutions 2
• Safety Data Sheets
·· Safety data sheets for all
Hanna solutions are available at
hannainst.com or upon request.
• Expiration date
·· The production batch number,
expiration date, and temperature
correlation table are reported on
all Hanna calibration solutions.
• NIST traceability
·· Standardized using a pH meter
calibrated by means of two standard
solutions prepared from NIST
standard reference materials.
pH
7.01 pH @ 25°C - Bottles
• Air-tight bottles
·· Air tight bottle with tamper-proof
Code Size FDA Bottle Certificate of Analysis seal of freshness to ensure quality.
HI7007/1G 1 G (3.78 L) (color coded solution) on request
• Single use sachets
HI7007/1L 1 L (color coded solution) on request ·· Light block packaging prevents
HI7007C 500 mL (color coded solution) on request oxidation from UV light that could
HI7007L 500 mL on request alter the value. Every sachet is as
fresh as the day it was packaged.
HI7007L/C 500 mL •
solutions
HI7007-050 500 mL (GroLine) •
·· Hanna solutions are offered in
light-tight bottles that meet FDA
HI7007-023 230 mL (GroLine) •
requirements.
HI7007-012 120 mL (GroLine) •
HI8007L 500 mL • •
HI8007L/C 500 mL • •
7.01 pH Buffer Solution
pH 7.01 is the most widely used among all
buffer solutions. For this reason we have
7.01 pH @ 25°C, and Combination Packs - Sachets
prepared it in a wider variety of sizes to meet
application demand.
Code Value Size Package Certificate of Analysis
HI70007C 7.01 pH 20 mL 25 pcs. •
www.hannainst.com | 2.151
2 pH Buffer Solutions
• Safety Data Sheets
·· Safety data sheets for all
Hanna solutions are available at
hannainst.com or upon request.
• Expiration date
·· The production batch number,
expiration date, and temperature
correlation table are reported on
all Hanna calibration solutions.
• NIST traceability
·· Standardized using a pH meter
calibrated by means of two standard
solutions prepared from NIST
standard reference materials.
pH
• Air-tight bottles
·· Air tight bottle with tamper-proof
seal of freshness to ensure quality.
• Single use sachets
·· Light block packaging prevents
oxidation from UV light that could
alter the value. Every sachet is as
fresh as the day it was packaged.
10.01 pH @ 25°C - Bottles
• FDA compliant bottles (HI80xx)
Code Size FDA Bottle Certificate of Analysis
solutions
HI8010L 500 mL • •
HI8010L/C 500 mL • •
2.152 | www.hannainst.com
1.68 pH @ 25°C - Bottles
pH Buffer Solutions 2
Code Size Certificate of Analysis
• Safety Data Sheets
HI7001L 500 mL on request
·· Safety data sheets for all
HI7001M 230 mL on request Hanna solutions are available at
hannainst.com or upon request.
• Expiration date
6.86 pH @ 25°C - Bottles ·· The production batch number,
expiration date, and temperature
Code Size FDA Bottle Certificate of Analysis correlation table are reported on
all Hanna calibration solutions.
HI7006/1G 1 G (3.78 L) on request
pH
HI8006L 500 mL • •
• Air-tight bottles
HI8006L/C 500 mL • • ·· Air tight bottle with tamper-proof
seal of freshness to ensure quality.
• Single use sachets
6.86 pH @ 25°C - Sachets ·· Light block packaging prevents
oxidation from UV light that could
Code Size Package Certificate of Analysis alter the value. Every sachet is as
fresh as the day it was packaged.
HI70006C 20 mL 25 pcs. •
solutions
Code Size Package your measurement system in the acidic pH
HI70083M 230 mL bottle range and bracket your samples by using a
second value at 4.01 pH or near 7.01 pH.
www.hannainst.com | 2.153
ORP and Sample
2 Preparation
Solutions
• Safety Data Sheets
·· Safety data sheets for all
Hanna solutions are available at
hannainst.com or upon request.
• Expiration date
·· The production batch number and
expiration date are reported on
all Hanna calibration solutions.
• Air-tight bottles
·· Air tight bottle with tamper-proof
seal of freshness to ensure quality.
pH
HI7051 Soil Sample Preparation Solution ORP Test and Pretreatment Solution Bottles
is an electrolyte solution used in the
measurement of soil pH. The pH of soil is Certificate
Code Description Size of Analysis
most commonly measured as either a water
slurry or electrolyte slurry, where a set ratio HI7021L 240 mV ORP solution for platinum and gold electrodes 500 mL on request
of soil:solvent (solvent is water or electrolyte
HI7021M 240 mV ORP solution for platinum and gold electrodes 230 mL on request
solution) is chosen; common ratios used
for soil pH are 1:1, 1:2 or 1:5, where more HI7022L 470 mV ORP solution for platinum and gold electrodes 500 mL on request
solvent than soil is used when soils-to-be- HI7022M 470 mV ORP solution for platinum and gold electrodes 230 mL on request
analyzed contain high amounts of organic 500 mL +
HI7091L reducing pretreatment solution (2 components)
matter or clay. Use of an electrolyte solution 14g (set)
is usually preferred as it is less affected by HI7092L oxidizing pretreatment solution for ORP electrodes 500 mL
soil electrolyte concentration and provides
HI7092M oxidizing pretreatment solution for ORP electrodes 230 mL
a more consistent measurement for soils
whose salt content may fluctuate as a result
of seasonal conditions or crop residues.
Sample Preparation Solution Bottles
Using the HI7051 solution prior to taking a
measurement provides for a more accurate
Code Description Size
pH reading of soil samples
HI7051M soil sample preparation solution 230 mL
2.154 | www.hannainst.com
Electrode Storage 2
Solutions
• Designed for storing any
pH or ORP electrode.
• Special formulation
·· Special formulation to minimize
microbial growth and osmotic/
diffusion effects between the solution
and inner reference electrolyte
• Expiration date
·· The production batch number and
expiration date are reported on
all Hanna calibration solutions.
pH
• Air-tight bottles
·· Air tight bottle with tamper-proof
seal of freshness to ensure quality.
• Single use sachets
·· Light block packaging prevents
oxidation from UV light that could
alter the value. Every sachet is as
fresh as the day it was packaged.
• FDA compliant bottles (HI803xx)
·· Hanna solutions are offered in
solutions
light-tight bottles that meet FDA
requirements.
HI80300L storage solution for pH and ORP electrodes 500 mL FDA bottle
HI80300M storage solution for pH and ORP electrodes 230 mL FDA bottle
www.hannainst.com | 2.155
2
pH
• Expiration date
·· The production batch number and expiration date
are reported on all Hanna calibration solutions.
• Air-tight bottles
·· Air tight bottle with tamper-proof seal
of freshness to ensure quality.
• Single use sachets
·· Light block packaging prevents oxidation from
UV light that could alter the value. Every sachet
is as fresh as the day it was packaged.
• FDA compliant bottles (HI80xx)
·· Hanna solutions are offered in light-tight
bottles that meet FDA requirements.
Electrodes can become dirty from use and will produce inaccurate
results even as they read correctly in a pH buffer. Hanna’s cleaning Electrode 1 has been properly cleaned before calibration. "
solutions eliminate impurities and residues that are left on electrode Electrode 2 has not been properly cleaned.
surfaces when immersed in samples during measurement and stored
incorrectly. Hanna suggests cleaning the bulb and junction of your
electrode on a regular basis to ensure that the probe is always clean
and prevent any clogging of the junction.
2.156 | www.hannainst.com
General Use Electrode Cleaning
Solutions - Bottles 2
Code Application Package
HI7061L general purpose 500 mL bottle
pH
HI8073L proteins 500 mL FDA bottle
HI70635L cleaning solution for wine deposits (winemaking) 500 mL General Use Electrode Cleaning
HI70636L cleaning solution for wine stains (winemaking) 500 mL
Solutions - Sachets
HI70640L cleaning solution for milk deposits (food industry) 500 mL
solutions
(food industry) HI70061G general purpose (GroLine) 20 mL sachet (25)
HI70663L cleaning solution for soil deposits (agriculture) 500 mL Specific Electrode Cleaning Solutions - Sachets
HI70664L cleaning solution for humus deposits (agriculture) 500 mL
www.hannainst.com | 2.157
2 Electrode Fill
Solutions
• Expiration date
·· The production batch number and
expiration date are reported on
all Hanna calibration solutions.
pH
• Air-tight bottles
·· Air tight bottle with tamper-proof
seal of freshness to ensure quality.
• FDA compliant bottles (HI80xx)
·· Hanna solutions are offered in opaque,
light-tight bottles that meet FDA
requirements.
HI7075 1M potassium nitrate, 0.7M potassium chloride electrode fill solution 30 mL bottle (4)
HI7082 3.5M KCl reference electrolyte for double junction electrodes 30 mL bottle (4)
HI7082M 3.5M KCl reference electrolyte for double junction electrodes 230 mL bottle
HI7082L 3.5M KCl reference electrolyte for double junction electrodes 460 mL bottle
HI8071 3.5M KCl with AgCl reference electrolyte 30 mL FDA bottle (4)
HI8082 3.5M KCl reference electrolyte for double junction 30 mL FDA bottle (4)
2.158 | www.hannainst.com
Table of Contents 3
ISE
Introduction���������������������������3.2
table of contents
Comparison Guides��������������������������������������������� 3.4
Sensor Reference Chart������������������������������������3.5
Benchtop��������������������������������3.6
Portable���������������������������������3.16
pH/ORP/ISE����������������������������������������������������������3.16
Fluoride Meter����������������������������������������������������3.19
Salinity and Sodium Meters������������������������ 3.20
Sensors��������������������������������� 3.22
Solutions and
Accessories�������������������������3.28
3.2 | www.hannainst.com
3
Reference and
Combination Electrodes
Hanna’s reference electrode is used with
our half-cell ISE sensors to provide accurate
and repeatable measurements. Hanna’s
combination electrodes incorporate the
measuring electrode with the reference,
making them ideal for field measurements.
ISE
Gas Membrane Combination
Gas sensors are combination electrodes Combination electrodes include a sensor and
that detect dissolved gases in a solution. reference electrode within one electrode
No external reference is required for these body. Our combination ISEs provide the same
electrodes. The sensing element is separated selectivity and response as our ISE half-cells,
from the sample solution by a gas permeable but include our superior double junction
membrane. Hanna’s offering of gas membrane reference in the same electrode body.
ISEs include ammonia and carbon dioxide. Combination solid-state electrodes have a
built-in solid-state sensor and quick refillable
Theory: A gas sensor works due to the partial reference electrode. Our liquid membrane
pressure of the measured gas in solution. The and fluoride combination electrodes have
dissolved gas in the sample diffuses into the Reference replaceable module construction and the
membrane and changes the pH in a thin film Hanna double junction reference stability.
Reference electrodes are used to provide
of unbuffered electrolyte on the surface of
a stable voltage and electrolytic contact
the internal pH sensor. Diffusion continues
to measure a voltage gradient across
until the partial pressure of the sample and
a measurement membrane. Hanna has
the thin film of electrolyte are the same. The
designed an easy to use, durable, double
pH change is proportional to the dissolved gas
introduction
junction, quick-fill, sleeve-style reference
in the sample.
electrode with a cone style junction to
work with the ISE family of sensors. The
design forms the liquid junction with the
test solution at the tip of the junction cone,
producing a highly stable reference electrode
with reasonable, low flow rates. The model
HI5315 is a silver/silver chloride half-cell with
a permanent gel-filled internal cell. The outer
fill solution is easily replaceable and serves as
a buffer zone between the internal chloride
ion-containing gel and the sample solution.
Hanna offers a complete line of silver-free fill
solutions to optimize your ion measurement.
A fast responding liquid junction, excellent
reproducibility, and ease of use will mark this
reference as your “best” in the lab.
www.hannainst.com | 3.3
3
3.4
comparison guides ISE
HI5522
HI5222
HI98191
HI98402
HI931101
HI931102
HI931100
•
pH Range
•
•
pH Range
•
•
•
•
•
ISE Range
•
•
ISE Range
•
ORP Range/Relative mV
•
•
ORP Range/Relative mV
EC/TDS/Salinity Range
Portable Meters
•
EC/TDS/Salinity Range
Benchtop Meters
Resistivity Range
Comparison Guides
•
Resistivity Range
| www.hannainst.com
Temperature Range
°C/°F
°C/°F
°C/°F
°C/°F
°C/°F
Temperature Range
°C/°F
°C/°F
(D)irect /(I)ncremental
D
D
D
D
D
Measurement
D,I
D,I
(D)irect /(I)ncremental Measurement
2
2
5
2
2
ISE Calibration Points
5
5 ISE Calibration Points
ISE: Standard/Custom
7/5
5/0
3/0
3/0
3/0
ISE Buffers: Standard/Custom
8/5
8/5
•
pH CAL Check
•
•
pH CAL Check™
Temperature Compensation:
A/M
A/M
A/M
A/M
A/M
(A)utomatic or (M)anual
Temperature Compensation:
A/M
A/M
(A)utomatic or (M)anual
•
GLP
•
•
GLP
(A)uto, (L)og on demand and
Auto(E)nd Data Logging
A, L, E
(A)uto, (L)og on demand and
Auto(E)nd Data Logging
A, L, E
A, L, E
•
HOLD
•
•
HOLD
•
•
•
Predefined ISE electrode
•
•
USB
PC Connection
USB
USB
•
and Multi-language
On-screen Help, Tutorial
•
•
and Multi-language
Application Designed
NaCl
fluoride
chloride
universal Application Designed
Na sodium
NaCl sodium
research
Page Page
3.6
3.21
3.16
3.19
research 3.12
3.20
3.20
3
Ion Selective Sensors and Accessories Reference Chart
Silver Free
Ionic Strength Reference
Adjusters (ISA) Fill Solutions ISE Standards 1, ISE Standards 2, ISE Standards 3,
Electrode Type Half-Cell Combination 500 mL bottle (4) 30 mL bottles 500 mL bottle 500 mL bottle 500 mL bottle Other
HI7072, HI4002-01,
Bromide solid HI4002 HI4102 HI4000-00 HI4000-70 polishing strip
1 M KNO₃ 0.1 M
ISE
HI7072, HI4003-01
Cadmium solid HI4003 HI4103 HI4000-00 HI4000-70 polishing strip
1 M KNO₃ 0.1 M
HI4004-51 module
polymer HI7082, HI4004-01,
Calcium HI4004 HI4104 HI4004-00 HI4104-51 module for combination
membrane 3.5 M KCl 0.1 M
HI4004-45 conditioning solution
HI7072, HI4008-01,
Cupric solid HI4008 HI4108 HI4000-00 HI4000-70 polishing strip
1 M KNO₃ 0.1 M
HI7072,
Cyanide solid HI4009 HI4109 HI4001-00 HI4000-70 polishing strip
1 M KNO₃
HI4010-00
HI4010-11 1 ppm with TISAB II
HI4010-05
HI7075, HI4010-12 2 ppm with TISAB II
HI4010-06 HI4010-01, HI4010-02, HI4010-03,
Fluoride solid HI4010 HI4110 1 M KNO₃ , HI4010-10 10 ppm with TISAB II
reference chart
0.1M 100 mg/L (ppm) 1000 mg/L (ppm)
HI4010-30, TISAB II, 0.7 M KCl HI4110-51 module for combination
1 ppm TISAB II, HI4010-30 fluoride measurement kit
10 ppm TISAB II
HI7072, HI4011-01,
Iodide solid HI4011 HI4111 HI4000-00 HI4000-70 polishing strip
1 M KNO₃ 0.1 M
HI4012-01,
HI7072, 1 M KNO₃
HI7076, 1 M NaCl
HI7078, (NH₄)₂SO₄
Reference HI5315
HI7082, 3.5 M KCl
HI7075, 1.7M KNO₃,
0.7M KCl
www.hannainst.com | 3.5
HI5522
The HI5522 is an advanced research grade benchtop pH/ORP/ISE from 0.000 μS/cm to 1000.0 mS/cm*. The meter can be set to auto-
and EC/TDS/Salinity/Resistivity meter that is completely ranging in which the meter chooses the appropriate conductivity
customizable with a large color LCD, capacitive touch keys, and range from seven ranges or fixed range in which the meter will only
USB port for computer connectivity. display reading in μS/cm or mS/cm. All readings are automatically
compensated for temperature variations with a built in temperature
The HI5522 is a two-channel meter that allows for simultaneous sensor. The temperature correction coefficient is adjustable from 0.00
measure of pH, ORP, or ISE on one channel and EC, TDS, Salinity, or to 10.00 %/°C.
Resistivity on the other. Channel one has a BNC connection for use
with the expansive line of pH, ORP, and ISE electrodes that Hanna As a pH meter the HI5522 can be calibrated up to five points with a
Instruments offers. The meter is supplied with the HI1131B glass body, choice of eight pre-programmed buffers or five custom buffers. The
double junction, combination pH electrode that operates over a wide HI5522 features Hanna’s exclusive CAL Check™ to alert the user
temperature range from 0 to 100°C. All readings are automatically of potential problems during the pH calibration process. Indicators
compensated for temperature variations with the separate HI7662-T displayed during calibration include “Electrode Dirty/Broken” and
temperature probe or from the built-in temperature sensor of the “Buffer Contaminated.” The overall probe condition based on the offset
conductivity probe on Channel two. The HI5522 is supplied with the and slope characteristic of the electrode is displayed as a percentage
HI76312 four-ring conductivity probe that operates over a wide range after calibration is complete.
3.6 | www.hannainst.com
3
In ISE mode the HI5522 can be calibrated up to five points with a choice along with the current measurement by selecting the Good Laboratory
of five fixed standards or five user defined in any concentration unit. Practice (GLP) display option.
The calibration data including date, time, standards used and slope can
For the measurement of high purity water used in pharmaceutical
be viewed at any time along with the current measurement by selecting
manufacturing, the HI5522 is programmed with the three stages of
the Good Laboratory Practice (GLP) display option.
the USP <645> method. Once a stage is met a report is generated
and can be saved. Up to 200 reports can be stored and transferred to
As an EC/TDS/Salinity/Resistivity meter the HI5522 can be calibrated
a Windows® compatible computer using the supplied USB cable and
up to four points with a choice of six pre-programmed conductivity
software.
standards or user defined custom standards. Resistivity, TDS, Practical
Salinity (PSU) and Natural Seawater Scale are calibrated through Three selectable logging modes are available: automatic, manual and
conductivity. The % NaCl is calibrated to single point with the HI7037 AutoHold logging. Up to 100,000 data points can be recorded in 100
salinity standard. The calibration data including date, time, and lots with 50,000 records max/lot on each channel and exported to a
ISE
standards used, offset and cell factor can be accessed at any time computer for data review and storage.
The HI5522 features a color graphic LCD with points when multi-point is selected.
on-screen help, graphic, and custom color
Data Logging
configurations. The display allows for real- CAL Check™ Three selectable logging modes are available
time graphing and the use of virtual keys on the HI5522: automatic, manual, and
CAL Check alerts users to potential problems
provide for an intuitive user interface. AutoHold logging. Automatic and manual
during the calibration of the pH electrode.
logs up to 100 lots with 50,000 records max/
benchtop
Indicators include “Electrode Dirty/Broken,”
Capacitive Touch lot, with up to 100,000 total data points.
“Buffer Contaminated,” electrode response Automatic logging features the option to
The HI5522 features sensitive capacitive time and the overall probe condition as a save data according to sampling period and
touch buttons for accurate keystrokes
percentage that is based on the offset and interval.
when navigating menus and screens. There
slope characteristics.
are four dedicated keys that are used for
routine operations including calibration and Data Transfer
switching measurement modes and four GLP Data Data can be transferred to a PC with USB cable
virtual keys that change based upon use. and HI92000 software (both sold separately).
HI5522 includes a GLP feature that allows
The capacitive touch technology ensures
users to view calibration data and calibration
the buttons never get clogged with sample
residue.
expiration information at the touch of a key. Contextual Help
Calibration data include date, time, standards Contextual help is always available through a
used for calibration.
Four Ring Conductivity Probe dedicated “HELP” key. Clear tutorial messages
and directions are available on-screen to
All readings are performed with the HI76312
ISE Measurement with Choice of quickly and easily guide users through
four-ring conductivity probe that has a
setup and calibration. The help information
built in temperature sensor for automatic Concentration Units displayed is relative to the setting/option
temperature correction. The four rings
The HI5522 allows for calibration and being viewed.
are made with platinum and the body of
readings in choice of concentration units.
the electrode is made of Polyetherimide
(PEI) plastic that is resistant to many harsh The choices of concentration units include
chemicals. The four-ring design allows for ppt, g/L, mg/mL, ppm, mg/L, μg/L, ppb, μg/L,
this probe to be used over a wide range of mg/mL, M, mol/L, mmol/L, %w/v and a user-
measurements. defined unit.
www.hannainst.com | 3.7
3
pH and EC Features
pH CAL Check™
Proper calibration of the pH electrode system is critical in order to achieve reliable results. Hanna’s exclusive CAL Check system includes several
features to help users reach that goal.
·· Each time a pH calibration is performed, the instrument compares the new calibration with the previous one. When this comparison
indicates a significant difference, the message alerts the user to either clean the electrode, check the buffer or both.
·· When measurements are taken too far from the calibration points, the instrument will warn the user with a message on the LCD.
·· The condition of the pH electrode after calibration is shown on the display, as well as the date and time.
·· To avoid taking readings with old calibrations, the instrument automatically reminds the user when the calibration has expired.
ISE
benchtop
EC USP Mode
Hanna’s HI5522 and HI5521 together with EC probes can be used for conductivity measurements required to prepare water for injection (WFI)
according to USP <645>.
The instruments give clear instructions on how to perform each stage and automatically check that the temperature, conductivity
and stability are within USP limits.
Comprehensive results are shown on a single screen at the end of the test. Up to 200 reports can be saved for future recall.
3.8 | www.hannainst.com
3
ISE Features
Incremental methods involve adding a standard to a sample or sample to a standard and detecting the mV change that occurs due to the addition,
and this difference determines the concentration. Historically the user would use mathematical equations to determine the ion concentration of
the sample; the HI5522, sample concentrations are calculated automatically and then logged into an ISE method report; up to 200 reports can
be saved for future recall. The entire process can be repeated on multiple samples without reentering sets of parameters. Reports can be printed
using HI92000 PC software.
Incremental method techniques can reduce errors from variables such as temperature, viscosity, pH or ionic strength. The electrodes remain
immersed throughout the process, thus reducing measurement time as well as eliminating sample carry over and its associated errors.
ISE
Known Addition, Known Subtraction, Analyte Addition, and Analyte Subtraction methods are standard method choices provided by the HI5522.
benchtop
First Step Sequence of Readings Results
The first step in performing an incremental Once the variables are entered, the The results are automatically calculated and
method analysis is to enter the required user is guided step-by-step through the shown together with all the parameters used.
parameters including sample, ISA and standard measurement process.
volumes, as well as standard concentration At this time, results can be saved into an
and stoichiometric factor. The initial mV measurement is made before ISE Methods Report and printed using the
the addition; next is the addition, followed by HI92000 PC software.
When repeating the analysis on another the second mV measurement.
sample, the parameters do not need to
be reentered.
• Low Profile
·· HI5522 features a low profile with
an ideal viewing angle
www.hannainst.com | 3.9
3
Additional Features by Screen
ISE
Dual Channels
The two measurement channels of the HI5522 are galvanically isolated
to eliminate noise and instability.
3.10 | www.hannainst.com
Specifications HI5522
Range
Resolution
-2.0 to 20.0 pH; -2.00 to 20.00; -2.000 to 20.000 pH
0.1 pH; 0.01 pH; 0.001 pH
3
Accuracy ±0.1 pH; ±0.01 pH; ±0.002 pH ±1 LSD
pH
automatic, up to five-point calibration, eight standard buffers available (1.68, 3.00, 4.01, 6.86, 7.01, 9.18,
Calibration
10.01,12.45), and five custom buffers
automatic, up to five-point calibration, five fixed standard solutions available for each measurement unit,
Calibration
and five user defined standards
ISE
Accuracy ±0.2°C ; ±0.4°F; ±0.2K (without probe)
0.000 to 9.999 µS/cm; 10.00 to 99.99 µS/cm; 100.0 to 999.9 µS/cm; 1.000 to 9.999 mS/cm;
Range
10.00 to 99.99 mS/cm; 100.0 to 1000.0 mS/cm absolute EC*
Resolution 0.001 µS/cm; 0.01 µS/cm; 0.1 µS/cm; 0.001 mS/cm; 0.01 mS/cm; 0.1 mS/cm
Accuracy ±1% of reading (±0.01 µS/cm)
Cell Constant 0.0500 to 200.00
Cell Type 4-pole cell
EC Calibration automatic standard recognition, user standard single point / multi-point calibration
Calibration Reminder yes
Temperature Coefficient 0.00 to 10.00 %/°C
Temperature Compensation disabled, linear and non-linear (natural water)
Reference Temperature 5.0 to 30.0°C
Profiles up to 10, 5 each channel
USP Compliant yes
0.000 to 9.999 ppm; 10.00 to 99.99 ppm; 100.0 to 999.9 ppm; 1.000 to 9.999 ppt; 10.00 to 99.99 ppt;
Range
100.0 to 400.0 ppt actual TDS* (with 1.00 factor)
TDS
Resolution 0.001 ppm; 0.01 ppm; 0.1 ppm; 0.001 ppt; 0.01 ppt; 0.1 ppt
Accuracy ±1% of reading (±0.01 ppm)
1.0 to 99.9 Ω•cm; 100 to 999 Ω•cm; 1.00 to 9.99 kΩ•cm; 10.0 to 99.9 kΩ•cm; 100 to 999 kΩ•cm;
Range
benchtop
1.00 to 9.99 MΩ•cm; 10.0 to 100.0 MΩ•cm
Resistivity
Resolution 0.1 Ω•cm; 1 Ω•cm; 0.01 kΩ•cm; 0.1 kΩ•cm; 1 kΩ•cm; 0.01 MΩ•cm; 0.1 MΩ•cm
Accuracy ±2% of reading (±1 Ω•cm)
Range practical scale: 0.00 to 42.00 psu; natural sea water scale: 0.00 to 80.00 ppt; percent scale: 0.0 to 400.0%
Resolution 0.01 for practical scale/natural sea water scale; 0.1% for percent scale
Salinity
Accuracy ±1% of reading
Calibration percent scale—one-point (with HI7037 standard); all others through EC
pH Electrode HI1131B glass body pH electrode with BNC connector and 1 m (3.3’) cable (included)
EC Probe HI76312 platinum, four-ring EC/TDS probe with and 1 m (3.3’) cable (included)
Temperature Probe HI7662-W stainless steel temperature probe with 1 m (3.3’) cable (included)
Input Channel(s) 1 pH/ORP/ISE + 1 EC
GLP cell constant, reference temperature/coefficient, calibration points, cal time stamp, probe offset for conductivity
Additional record : Up to 100 lots, 50,000 records max/lot / maximum 100,000 data points/channel;
Specifications Logging interval: 14 selectable between 1 second and 180 minutes; type: automatic, manual, AutoHOLD;
additional: 200 records USP; 200 records incremental methods
PC Connection USB
Power Supply 12 VDC adapter (included)
Environment 0 to 50°C (32 to 122°F; 273 to 323K) RH max 95% non-condensing
Dimensions / Weight 160 x 231 x 94 mm (6.3 x 9.1 x 3.7”) / 1.2 kg (2.64 lbs.)
HI5522-01 (115V) and HI5522-02 (230V) are supplied with HI1131B pH electrode, HI76312 EC/TDS probe, HI7662-W temperature probe,
Ordering pH 4.01 buffer solution sachet (2), pH 7.01 buffer solution sachet (2), pH 10.01 buffer solution sachet (2), 1413 µS/cm conductivity standard sachet
Information (2), 12880 µS/cm conductivity standard sachet (2), HI700601 electrode cleaning solution sachet (2), HI7082 3.5M KCl electrolyte solution (30 mL),
HI76404W electrode holder, 12 VDC adapter, capillary dropper pipette, quality certificate, quick start guide and instruction manual.
(*) Uncompensated conductivity (or TDS) is the conductivity
(or TDS) value without temperature compensation.
(**) Reduced to actual probe limits
pH and ORP electrodes begin on page 2.122; pH and ORP solutions begin on page 2.142;
ISE electrodes and solutions begin on page 3.22; EC, TDS and salinity solutions begin on page 5.39 www.hannainst.com | 3.11
HI5222
The HI5222 is an advanced research grade benchtop pH/mV/ISE dual during calibration include “Electrode Dirty/Broken” and “Buffer
channel meter that is completely customizable with a large color LCD, Contaminated.” The overall probe condition based on the offset and
capacitive touch keys, and USB port for computer connectivity. slope characteristic of the electrode is displayed as a percentage after
calibration is complete.
The HI5222 features two galvanically isolated BNC connections for
use with the expansive line of pH, ISE and ORP electrodes that Hanna As an ISE meter the HI5222 can be calibrated up to five points with a
Instruments offers. The meter is supplied with the HI1131B glass body,
choice of seven fixed standards or five user defined in any concentration
double junction, combination pH electrode that operates over a wide
unit. The calibration data including date, time, standards used and
range of temperature from 0 to 100°C. All readings are automatically
slope can be viewed at any time along with the current measurement
compensated for temperature variations with the separate HI7662-T
temperature probe that is included. by selecting the Good Laboratory Practice (GLP) display option.
As a pH meter the HI5222 can be calibrated up to five points with Three selectable logging modes are available: automatic, manual
eight pre-programmed buffers or five custom buffers. The HI5222 and AutoHold logging. Up to 100,000 data points per channel can
features Hanna’s exclusive CAL Check™ to alert the user of potential be recorded in 100 lots, 50,000 records max/lot and exported to a
problems during the pH calibration process. Indicators displayed computer for data review and storage.
3.12 | www.hannainst.com
Customizable User Interface means that two measurement probes can ISE Measurement with
3
be in the same solution at the same time and
The user interface of the HI5222 allows
the voltages produced will not interfere with Incremental Methods
the user to show measurements in various
each other. The known addition, known subtraction,
modes: basic measurement with or without
analyte addition, and analyte subtraction
GLP information, real-time graphing, and
logging data. Calibration stability criteria
Choice of Calibration incremental methods are pre-programmed
can be adjusted from fast, moderate, and Automatic buffer recognition, semi automatic, into the HI5222. Simply follow the on screen
accurate. Programmable alarm limits can be and direct manual entry pH calibration guided procedure and the meter will perform
set to inside or outside allowable limits. options are available for calibrating up to five the calculation automatically allowing for
points, from a selection of eight standard a higher level of accuracy to be obtained as
Color Graphic LCD buffers and up to five custom buffers. compared to a direct ISE measurement.
ISE
used for calibration, and electrode offset and
lot with up to 100,000 total data points per
slope characteristics.
The HI5222 features sensitive capacitive channel. Automatic logging features the
touch buttons for accurate keystrokes option to save data according to sampling
when navigating menus and screens. There
CAL Check™ period and interval.
are four dedicated keys that are used for CAL Check alerts users to potential problems
routine operations including calibration and during the calibration of the pH electrode. Data Transfer
switching measurement modes and four Indicators include “Electrode Dirty/Broken,”
virtual keys that change based upon use. “Buffer Contaminated,” electrode response Data can be transferred to a PC with USB
The capacitive touch technology ensures time and the overall probe condition as a cable and HI92000 software (both sold
the buttons never get clogged with sample percentage that is based on the offset and separately).
residue. slope characteristics.
Contextual Help
Two Galvanically Isolated pH/ ISE Measurement with Choice of Contextual help is always available through a
ORP/ISE Channels Concentration Units dedicated “HELP” key. Clear tutorial messages
The HI5222 has two input channels that can The HI5222 allows for calibration and readings and directions are available on-screen to
be used for pH, ORP and ISE electrodes. Each in choice of concentration units. The choices quickly and easily guide users through
input channel has connectors for BNC probes, of concentration units include ppt, g/L, mg/ setup and calibration. The help information
reference probes and a temperature sensor. mL, ppm, mg/L, μg/mL, ppb, μg/L, mg/mL, M, displayed is relative to the setting/option
Each channel is galvanically isolated which mol/L, mmol/L, %w/v and a user-defined unit. being viewed.
benchtop
CAL Check Screens
www.hannainst.com | 3.13
3
Additional Features by Screen
ISE
Dual Channels
The two measurement channels of the HI5222 are galvanically isolated
to eliminate noise and instability.
3.14 | www.hannainst.com
3
ISE
Specifications HI5222
Range -2.0 to 20.0 pH; -2.00 to 20.00; -2.000 to 20.000 pH
Temperature
automatic or manual from -20.0 to 120.0°C/-4.0 to 248.0°/253.15 to 393.15K
Compensation
Range ±2000 mV
Resolution 0.1 mV
mV
Accuracy ±0.2 mV ±1 LSD
benchtop
ISE Accuracy ±0.5% (monovalent ions); ±1% (divalent ions)
automatic, up to five-point calibration, seven fixed standard solutions available for each measurement unit,
Calibration
and five user defined standards
pH Electrode HI1131B glass body pH electrode with BNC connector and 1 m (3.3’) cable (included)
Temperature Probe HI7662-W stainless steel temperature probe with 1 m (3.3’) cable (included)
GLP calibration points, calibration time stamp, probe offset, slope, date, time and buffers/standards used
record : Up to 100 lots, 50,000 records max/lot / maximum 100,000 data points/channel;
Logging
interval: 14 selectable between 1 second and 180 minutes; type: automatic, manual, AutoHOLD;
Additional
Specifications Display color graphic LCD 240x340 pixels
PC Connection USB
HI5222-01 (115V) and HI5222-02 (230V) are supplied with HI1131B pH electrode, HI7662-W temperature probe, pH 4.01 buffer solution sachet
Ordering
(2), pH 7.01 buffer solution sachet (2), HI700601 electrode cleaning solution sachet (2), HI7082 3.5M KCl electrolyte solution (30 mL), HI76404W
Information electrode holder, 12 VDC adapter, capillary dropper pipette, quality certificate, quick start guide and instruction manual.
pH and ORP electrodes begin on page 2.122; pH and ORP solutions begin on page 2.142;
ISE electrodes and solutions begin on page 3.22 www.hannainst.com | 3.15
HI98191
3 Professional
Waterproof Meters
pH/ORP/ISE
at a specified interval
• Connectivity
·· PC connectivity via opto-isolated
micro-USB with HI92000 software
• GLP
·· GLP data provides data from
previous calibration to ensure Good
Laboratory Practices are met
• Intuitive keypad
·· Most of the available options
such as GLP information, help,
range, calibration and backlight
have a dedicated button
• Supplied complete
·· Each meter is supplied complete
with sensor, calibration solution,
beakers, PC software and connection Designed for professionals
cable, instruction manual, quick
The HI98191 is a rugged, portable pH/ORP/ISE meter with the performance and features of
start guide and batteries in a
a benchtop meter. Exchange out the pH probe for an ORP probe to obtain mV readings in the
rugged, custom carrying case.
±2000 mV range. This professional, waterproof meter can easily be operated with one hand
and complies with IP67 standards. The HI98191 is supplied with all necessary accessories to
perform a pH/temperature measurement packaged into a durable carrying case.
3.16 | www.hannainst.com
Enhanced Calibration Dedicated Help Key
An “Out of Calibration Range” warning can
be engaged to keep the user informed of the
Contextual help is always available through a
dedicated “HELP” key. Clear tutorial messages
3
current calibration and help to avoid performing and directions are available on-screen to
measurements that are out of range. quickly and easily guide users through
setup and calibration. The help information
CAL Check™ displayed is relative to the setting/option
being viewed.
Hanna’s CAL Check maintains a history of past
calibrations and monitors the pH electrode
Backlit Graphic LCD Display
and buffers during subsequent calibrations
The HI98191 features a backlit graphic LCD for any signs of wide variances due to a
with on-screen help. The graphic display dirty or broken electrode or contaminated
allows for the use of virtual keys to provide pH buffers. During calibration, users are
for an intuitive user interface. alerted to problems should they occur. After
calibration, the electrode’s overall condition
Waterproof Protection is displayed as a percentage.
ISE
waterproof casing and can withstand
Setup screen
immersion in water at a depth of 1 m for up Our extensive setup screen features a host
to 30 minutes. The probe features an IP68 of configurable options such as time, date,
rating for continuous immersion in water. temperature units and language for help
screens and guides.
PC Connectivity
Logged data can be transferred to a Windows
GLP compatible PC with the included HI920015
Comprehensive GLP functions are directly micro USB cable and HI92000 software.
accessible by pressing the GLP key. Calibration
data, including date, time and calibration Long Battery Life
values are stored for retrieval at a later time.
The display of the meter has a battery icon
indicator to show the remaining power.
ISE Sensors and Calibration
The meter uses four 1.5V AA batteries that
HI98191 has 17 different standard ISE sensors provide up to 200 hours of battery life.
pre-programmed in the meter. Selecting the
appropriate sensor will automatically update
the ion charge for slope calibration and can be
calibrated up to five points with the choice of
portable
seven standards and five custom standards
(choice of units). This meter allows an
extensive choice of measurement units (ppm, Data Logging
ppt, g/L, ppb, µg/L, mg/mL, M, mol/L, mmol/L,
The log-on-demand feature allows users
% w/v, user) and has an expanded measuring
to store up to 300 samples that can be later
range of 1.00 x 10-⁷ to 9.99 x 10¹⁰.
transferred to a PC with the HI920015 USB
cable and HI92000 software.
Intuitive Keypad
The fitted rubber keypad has dedicated keys
for power, backlight, up/down arrows, help
and alphanumeric characters. The meter also
features two virtual soft keys that navigate
the user through the configuration of each
parameter, meter setup, and logging of data.
The interface is intuitive for any user’s level Rugged Custom Carrying Case
pH Calibration of experience.
The HI98191 meter, probe, and all accessories
Choose from seven standard pH buffers and are supplied in the HI720191 rugged carrying
five custom pH buffers to obtain up to five AutoHold case designed to provide years of use. The
point calibration and achieve high precision Pressing AutoHold during measurement will inside compartment of the carrying case is
readings with a pH accuracy of ±0.002 and up automatically hold the first stable reading on thermoformed to securely hold and protect
to ±0.001 pH resolution. the display. all of the components.
www.hannainst.com | 3.17
3
ISE
Specifications HI98191
Range -2.0 to 20.0 pH; -2.00 to 20.00 pH; -2.000 to 20.000 pH
Resolution 0.1 pH; 0.01 pH; 0.001 pH
Accuracy ±0.1 pH; ±0.01 pH; ±0.002 pH
pH* up to five-point calibration, seven standard buffers available
Calibration
(1.68, 4.01, 6.86, 7.01, 9.18, 10.01, 12.45) and five custom buffers
Temperature
automatic or manual from -20.0 to 120.0°C (-4.0 to 248.0°F)
Compensation
Range ±2000 mV
Resolution 0.1 mV
portable
mV*
Accuracy ±0.2 mV
Relative mV Offset Range ±2000 mV
Range from 1.00 E-⁷ to 9.99 E¹⁰ concentration
Resolution 3 digits 0.01; 0.1; 1; 10 concentration
ISE
Accuracy ±0.5% of reading (monovalent ions), ±1% of reading (divalent ions)
Calibration up to five point calibration, six standard solutions available (0.1, 1, 10, 100, 1000, 10000 ppm)
Range -20.0 to 120.0 °C (-4.0 to 248.0°F)
Temperature* Resolution 0.1°C (0.1°F)
Accuracy ±0.4°C (±0.8°F) (excluding probe error)
pH Probe HI72911B titanium body, pH electrode with internal temperature sensor, BNC connector and 1 m (3.3’ cable)
Slope Calibration from 80 to 110%
Log-on-demand 300 samples (100 each pH/mV/ISE range)
PC Connection opto-isolated USB with HI92000 software and micro USB cable
Additional
Input Impedance 10¹² Ω
Specifications
Battery Type / Life 1.5V AA batteries (4) / approximately 200 hours of continuous use without backlight (50 hours with backlight)
Auto-off user selectable: 5, 10, 30, 60 min, disabled
Environment 0 to 50°C (32 to 122°F); RH 100% IP67
Dimensions / Weight 185 x 93 x 35.2 mm (7.3 x 3.6 x 1.4”) / 400 g (14.2 oz.)
HI98191 is supplied with HI72911B pH electrode, HI7004M pH 4.01 buffer solution (230 mL), HI7007M pH 7.01 buffer solution (230 mL), electrode
Ordering
cleaning solution sachet (2), 100 mL plastic beaker (2), HI92000 PC software, HI920015 micro USB cable, 1.5V AA batteries (4), quick start guide, quality
Information certificate and instruction manual in an HI720191 rugged carrying case with custom insert.
pH and ORP electrodes begin on page 2.122; pH and ORP solutions begin on page 2.142;
3.18 | www.hannainst.com ISE electrodes and solutions begin on page 3.22
HI98402
Fluoride Meter 3
• ATC
·· Automatic Temperature Compensation
• Waterproof
·· Waterproof, rugged housing for both
indoor and outdoor applications
• Help features
·· Tutorial messages on LCD display
ISE
The HI98402 automatically compensates
for temperature from -5 to 55°C using the
optional HI7662 stainless steel temperature
probe. Both the temperature and fluoride
concentrations are displayed on the large LCD.
Specifications HI98402
0.050 to 0.500 mg/L (ppm); 0.50 to 5.00 mg/L (ppt)
Range
5.0 to 50.0 mg/L; 50 to 500 mg/L; 0.50 to 1.90 g/L (ppt)
Fluoride Resolution 0.001 mg/L (ppm); 0.01 mg/L; 0.1 mg/L; 1 mg/L; 0.01 g/L
portable
±5% of reading or ±0.02 mg/L (ppm) fluoride
Accuracy
(with ±3°C from calibration temperature)
Temperature
automatic, -5 to 55°C (with temperature probe)
Compensation
Battery Type / Life 1.5V AAA (3) / approximately 200 hours of continuous use
Ordering
HI98402 is supplied with batteries, rugged carrying case and instructions.
Information
3 Sodium Chloride
and Sodium
Content Meters
• Help features
·· Tutorial messages on LCD
• Backlight
·· Dual-level LCD
Accuracy (@25°C/77°F) ±5% of reading (NaCl) ±0.05 pNa; ±5% of reading (Na)
portable
Temperature
fixed at 25°C (77°F)
Compensation
Battery Type / Life 1.5V AAA (3) / approx. 200 hours of continuous use
Ordering HI931100 and HI931101 and are supplied with batteries, instructions and
Information hard carrying case.
HACCP Compliant 3
Salinity Foodcare
Meter
• Help features
·· Tutorial messages on LCD
• Backlight
·· Dual-level LCD
ISE
measure the sodium content of a solution
and report it as g/L NaCl or percent NaCl.
This powerful instrument has four ranges,
capable of measuring concentrations from
0.150 g/L to 300 g/L. This meter is able to
auto-range from sample to sample over an
extremely broad range without the need
for recalibration.
portable
NaCl 0.001 g/L NaCl; 0.01 g/L NaCl; 0.1 g/L NaCl; 1 g/L NaCl;
Resolution
0.1 % NaCl
Temperature
fixed at 25°C (77°F)
Compensation
Battery Type / Life 1.5V AAA (3) / approx. 200 hours of continuous use
Ordering
HI931102 is supplied with batteries, instructions and hard carrying case.
Information
120 mm
120 mm
120 mm
120 mm
120 mm
012 mm 012 mm 012 mm 012 mm 012 mm
sensors
Type gas-sensing; combination solid-state; half-cell solid-state; combination solid-state; half-cell solid-state; combination
1M to 1•10-⁶M
Measurement 1M to 1•10-⁶M 0.1M to 1•10-⁷M
17000 to 0.02 mg/L (ppm)
Range 79910 to 0.08 mg/L (ppm) 11200 to 0.01 mg/L (ppm)
14000 to 0.016 mg/L as N
Body O.D. 12 mm 12 mm 12 mm 12 mm 12 mm
determination of
ammonium, ammonia in electroplating, battery construction, laboratory and as
Possible Applications plants, soils, and as an indicator for titration
wine, beer, water, waste an indicator for titrations
water and soil
3.22 | www.hannainst.com
HI4004 · HI4104 · HI4105 · HI4007 · HI4107
ISE
120 mm
120 mm
120 mm
120 mm
120 mm
012 mm 012 mm 012 mm 012 mm 012 mm
sensors
Parameter Calcium Carbon Dioxide Chloride
Code HI4004 HI4104 HI4105 HI4007 HI4107
Body O.D. 12 mm 12 mm 12 mm 12 mm 12 mm
determination of
determination of free chloride ions in emulsified
determination of free calcium in beverages, carbonates as CO2 in
Possible Applications food products, beverages, plants, soils and as an
water, and seawater water, soft drinks and
indicator for titration
wine samples
www.hannainst.com | 3.23
HI4008 · HI4108 · HI4009 · HI4109
120 mm
120 mm
120 mm
120 mm
012 mm 012 mm 012 mm 012 mm
sensors
Body O.D. 12 mm 12 mm 12 mm 12 mm
3.24 | www.hannainst.com
HI4010 · HI4110 · FC301B · HI4011 · HI4111
ISE
120 mm
120 mm
120 mm
120 mm
120 mm
sensors
Parameter Fluoride Iodide
Code HI4010 HI4110 FC301B HI4011 HI4111
1M to 1•10-⁶M 1M to 1•10-⁷M
Measurement Range
Sat. to 0.02 mg/L (ppm) 127000 to 0.01 mg/L (ppm)
Optimum pH Range 5 to 8 5 to 8 5 to 8 2 to 13 2 to 13
Body O.D. 12 mm 12 mm 12 mm 12 mm 12 mm
www.hannainst.com | 3.25
HI4012 · HI4112 · HI4013 · HI4113 · HI4014 · HI4114
120 mm
120 mm
120 mm
120 mm
120 mm
120 mm
012 mm 012 mm 012 mm 012 mm 012 mm 012 mm
sensors
solid-state; solid-state; polymer membrane; polymer membrane; polymer membrane; polymer membrane;
Type
half-cell combination half-cell combination half-cell combination
1.0M to 1•10-5M
0.1M to 1•10-⁶M 1.0M to 1•10-⁶M
Measurement Range 6200 to 0.62 mg/L (ppm)
20700 to 0.21 mg/L (ppm) 39100 to 0.039 mg/L (ppm)
1400 to 0.4 mg/L (ppm) as N
Body O.D. 12 mm 12 mm 12 mm 12 mm 12 mm 12 mm
3.26 | www.hannainst.com
HI4015 · HI4115 · FC300 · HI5315
ISE
120 mm
120 mm
120 mm
120 mm
09 mm
012 mm 012 mm 012 mm 012 mm
sensors
Parameter Silver/Sulfide Sodium Reference
Code HI4015 HI4115 FC300B HI5315
Approximate Slope +56 (Ag+) / -28 (S²-) +56 Ag+ / -28 S²- +57 N/A
Body O.D. 12 mm 12 mm 12 mm 12 mm
used as an indicator for titrations using silver nitrate; used to complete electrical circuit
water, soil, food products, soup, dairy,
Possible Applications for the determination of sulfide ions in waters, and to provide stable reference
brines, soft drinks, beer, wine and laboratory
paper liquors, natural waters and soils. voltage for ISE half-cells
www.hannainst.com | 3.27
3 Solutions
ISE Standards
Our wide selection of Hanna ISE Standards are made and bottled in our
own state-of-the-art solutions facility. ISE Standards are required for
direct and incremental measurement techniques and are available with
certificate of analysis.
ISE
HI4012-21 0.1 M sulfate standard 500 mL HI4005-40 carbon dioxide filling solution 30 mL bottles (4)
HI4013-03 1000 ppm nitrate standard (as N) 500 mL Specific Solutions for ISE Sensors
HI4014-01 0.1 M potassium standard 500 mL
HI4016-01 0.1 M sodium standard 500 mL pH 4 and pH 7 buffers with chloride ions
10 packages each
HI4000-47 background, used to check internal glass
HI4016-02 100 ppm sodium standard 500 mL and 2 beakers
electrode of gas sensors
HI4016-03 1000 ppm sodium standard 500 mL
conditioning and storage solution
HI4001-45 500 mL
HI4016-10 10 ppm sodium standard 500 mL for HI4101 ammonia ISE
3.28 | www.hannainst.com
Solutions 3
ISE
Code Description Size
HI4000-00 ISA for halide ISEs 500 mL
500 mL + 18 g
HI4015-00 SAOB (sulfide antioxidant buffer)
(2 components)
solutions
Recommended for our combination ISE electrodes and the
Hanna HI5315 reference electrode. Reference electrodes should
be topped off daily with the correct filling solution for optimum
measurement performance. These solutions are silver-free to eliminate
silver precipitates found with standard electrolytes.
www.hannainst.com | 3.29
3
Solutions
The sodium and sodium chloride standard solutions are used for the
Sodium (Na+) ISE Standard Solutions calibration of pocket-sized, portable and bench salinity meters, as well
as for the sodium ISE.
Code Description Package
These solutions are available in 230 or 500 mL bottles, and also
HI7080L 2.3 g/L sodium standard solution 500 mL bottle
in opaque bottles that meet the FDA (Food & Drug Administration)
HI7080M 2.3 g/L sodium standard solution 230 mL bottle specifications, in 230 or 500 mL volumes.
HI7086L 23 g/L sodium standard solution 500 mL bottle
HI8080L 2.3 g/L sodium standard solution 500 mL FDA bottle Both sodium/sodium chloride and fluoride solutions are available with
ISE
HI8086L 23 g/L sodium standard solution 500 mL FDA bottle a certificate of analysis on request.
3.30 | www.hannainst.com
Table of Contents 4
Titration
Introduction�������������������������� 4.2 Titration Solutions
table of contents
Product Spotlights���������������������������������������������4.4 and Reagents��������������������4.40
Comparison Guides�������������������������������������������� 4.5
Meter Specific
Titrators���������������������������������4.6
Accessories and
HI902C Automatic
Titration System������������������������������������������������� 4.6 Reagents������������������������������4.41
HI921 Autosampler�����������������������������������������4.10
HI901C Automatic
Titration System�����������������������������������������������4.14
HI903 Karl Fischer Volumetric�������������������4.18
HI904 Karl Fischer Coulometric��������������� 4.22
Total Titratable Acidity��������������������������������� 4.26
Total Titratable Alkalinity��������������������������� 4.28
Titratable Acidity for
Dairy Products�������������������������������������������������� 4.30
Titratable Acidity for
Fruit Juice������������������������������������������������������������� 4.32
Formol Number for Wine
and Fruit Juice��������������������������������������������������� 4.34
Sulfur Dioxide for Wine�������������������������������� 4.36
Titratable Acidity for Wine������������������������� 4.38
• The reaction between the analyte and the titrant • Argentometric titrations
must occur quickly, without a secondary reaction
• pH, ORP and Ion selective measurements
• The reaction must go to completion
Analyses performed by bivoltammetric automatic titrators include:
• The reaction must have well-known stoichiometry (reaction ratio)
• Must have a convenient method of endpoint detection • Coulometric Karl Fischer titration (trace
amounts of water determination)
Titrations are highly precise and can provide many advantages over
alternative methods. Titrations are quickly performed and require • Volumetric Karl Fischer titration (greater
relatively simple apparatus and instrumentation. than 100 ppm water determination)
introduction
4.2 | www.hannainst.com
4
Titration
accurate burette glass cylinder diameter, low dead volume in the valve,
minimal evaporation/permeation and chemically resistant tubing.
introduction
www.hannainst.com | 4.3
4 Product Spotlights
HI921
Autosampler
The HI921 can utilize up to three peristaltic pumps for automatic
reagent addition, sample leveling and waste aspiration and one
membrane pump for spray rinsing. An included control panel allows
for manual operation of the motors and pumps. The HI921 also
features a built-in magnetic stirrer, electrode rinse feature, USB
interface with compatible barcode reader and built-in RFID for
each tray.
Titration
HI902C
HI901C
4.4 | www.hannainst.com
HI84531
HI84530
HI84533
HI84532
HI84502
HI84529
HI84500
HI84532
HI84529
HI84530 • HI84531
Alkalinity
•
•
•
•
Formol Number pH Range Low Range Acidity
•
•
Tartaric Acid Range
•
High Range Acidity
Wine Products
Dairy Products
•
•
•
Citric Acid Range
•
pH Range
•
•
•
Malic Acid Range
•
•
•
•
pH Range
•
Tartaric Acid Range
Automatic Temperature
•
•
•
•
•
•
Three-point pH Calibration
•
•
•
•
•
•
Automatic Temperature Compensation Automatic Temperature
•
•
•
•
•
GLP Features
•
•
•
•
•
Backlit Display
•
Data Logging
•
•
•
•
•
www.hannainst.com |
•
Data Logging
•
Total Titratable Acidity and Titratable
•
•
•
•
•
Backlit Display
•
PC Connectivity PC Connectivity
•
•
•
•
•
PC Connectivity PC Connectivity
Page
Page Page
4.30
Page
4.32
4.36
4.34
4.26
4.38
4.28
Automatic Benchtop Mini Titrator Comparison Guides
4
4.5
comparison guides Titration
HI902C
HI921 Autosampler
compatible
Reagent addition
Titration
feature
4.6 | www.hannainst.com
Titration Capabilities Simple and Quick Navigation Market Specific Methods Packs
Virtual key selections present on the Hanna offers titration method packages for 4
Dynamic Titrant Dosing display allow for simple and quick navigation various markets including food, beverage,
between screens and menus without getting dairy, wine, and more. Ask our Sales
The dynamic dosing feature allows for timely
lost in a nest of information. Consultants about which methods in our
and accurate titration results by relating the
library are available for your specific needs.
titrant volume dosed to the mV response
from the titration reaction. This provides for
larger doses near the beginning of a titration Data and Storage Adaptable Standard Methods
and smaller, more precise doses near the Our technical experts can program and
titration endpoint. Customizable Titration Reports customize standard methods developed by
such affiliations as ISO, ASTM, AOAC, AOCS,
Signal Stability Timing Each titration report is fully customizable
EPA, and more directly onto your titrator.
so users can ensure they are storing and
The signal stability feature monitors when filing the appropriate data required for their Ask our Sales Consultants which standard
the mV response of the titration reaction methods are possible with our HI902C system.
application and procedures.
stabilizes before providing the next titrant
dose. This ensures reliable measurement
Titration
Flexible GLP Management
values throughout the length of a titration.
Connectivity and
All necessary GLP (Good Laboratory Practice)
Equivalence Endpoint Detection information can be recorded with each sample Functionality
Equivalence endpoint detection is critical in including: sample identification, company
applications where fixed endpoints are not and operator name, date, time, electrode ID
Multifunctional with Four
specified in standard methods. This endpoint codes, and calibration information.
indicates where the mV response from the Working Modes
titration is greatest with respect to the
The HI902C functions as a titrator, pH meter,
volume of titrant dosed.
mV/ORP meter, and ISE meter. Valuable
laboratory bench space is saved, and multiple
Multiple Equivalence Point analyses can be performed on one sample.
Detection
The HI902C can detect multiple equivalence
points during one titration as specified and
required in several standard methods and
applications.
Method Sequencing
The HI902C offers users the option of linking
two methods. This allows for two analyses
to be run on the same sample or for back
titrations to be performed. Effortless Data Transfer
Data can easily be transferred to a USB
Multiple Titration Types flash drive or PC with the Hanna HI900PC Multiple Connections
Paired with the right electrode from our sensor application software. The USB port allows The titrator offers device support for two
line, our potentiometric titrator can perform for the transfer of titration methods, analog boards, allowing up to two electrodes,
acid/base, redox (ORP), complexometric, titration reports, and software upgrades via two burettes, and two stirrers to be
precipitation, non-aqueous, argentometric, USB flash drive. simultaneously connected to one unit.
and ion selective titrations, as well as back
titrations and titre determinations. Autosampler Connectivity
Methods of Analysis
The HI902C works seamlessly with our
Interface and Display Customizable Methods
HI921 Autosampler. The HI921 features 16
or 18 sample tray options, automatic tray
The HI902C can store up to 100 user-defined
Detailed Titration Graphs identification, automatic beaker detection,
or standard titration methods. Each method up to three peristaltic pumps for reagent
A real-time titration curve can be displayed may be customized and optimized for addition and removal, real-time titration and
during each titration; this feature is useful performance based on application and user sequencing progress, and more.
when new methods are tested or when a
requirements.
procedure requires optimization.
Multiple Peripherals
Interactive Color Display Titration Method Support Users can print reports directly from the
A large, color LCD screen clearly shows the Onsite installation, training, and titrator using a standard parallel printer.
chosen titration method along with results, customization is available from one of our An external monitor and keyboard may be
units, titration volume, temperature, and mV Applications or Service experts. Hanna offers attached for added versatility, as well as an
or pH values. The HI902C also offers multi- continued support via phone or webinar for analytical balance for automatic sample mass
language support. any questions you might have along the way. entry for titrations.
www.hannainst.com | 4.7
Versatile Data Management • Data can be transferred to a PC using Hanna HI900PC software
Fully customizable titration Linked methods allow two Fully configurable balance
methods methods to run in sequence interface
4.8 | www.hannainst.com
4
Specifications HI902C
Range -2.0 to 20.0 pH; -2.00 to 20.00 pH; -2.000 to 20.000 pH
Resolution 0.1 mV
mV
Accuracy
±0.1 mV
(@25°C/77°F)
Titration
Accuracy
±0.5% monovalent; ±1% divalent
(@25°C/77°F)
Burette Auto-Detection burette size is automatically recognized when inserted into the unit
Programmable Stirrer overhead propeller type, 100-2500 RPM, resolution 100 rpm
Temperature
manual (MTC) or automatic (ATC)
Compensation
Endpoint Determination equivalence point (1st or 2nd derivative) or fixed pH/mV value
pH Calibration up to five-point calibration, eight standard buffers and five custom buffers
Measurement Units user-specified expression of concentration units to suit specific calculation requirements
Real Time & mV-volume or pH-volume titration curve, 1st derivative curve or 2nd derivative curve
Stored Graphs pH mode, mV mode or ISE mode: pH/mV/concentration versus time
Data Storage up to 100 titration and pH/mV/ISE reports
USB Host (Side) flash drive compatibility for transfers of methods and reports
Peripherals (Rear) connections for VGA display, PC-keyboard, parallel printer, USB device input, RS232, interface for autosampler
100-240 VAC
Power "-01" models, US plug (type A)
"-02" models, European plug (type C)
Weight approximately 9 kg (20 lbs.) with one pump, stirrer and sensors
HI902C1-01 and HI902C1-02: titrator with one analog board, overhead propeller stirrer with stand, 25 mL glass burette, dosing pump drive,
Ordering temperature sensor, USB cable, 256 Mb USB flash drive and PC software.
Information HI902C2-01 and HI902C2-02: titrator with two analog boards, overhead propeller stirrer with stand, 25 mL glass burette, dosing pump,
temperature sensor, USB cable, 256 Mb USB flash drive and PC software.
Titration solutions and reagents begin on page 4.40; See accessories on page 4.41 www.hannainst.com | 4.9
HI921
4 Autosampler
Titration
control panel
Automate up to 18 samples before and after titration sequences; up to three beakers per tray can
be designated for an electrode rinse sequence, allowing for sufficient
The HI921 Autosampler is an automated titration sample handling removal of solutions that are hard to clean between each sample
system designed for use with the HI902C Automatic Titration System, titration. During each sample titration, the real-time progress is shown
making multiple sample titrations quick and easy. on the HI902C display. Finished sample results and graphs can be
accessed during and after the titrations have finished.
With the Autosampler, up to 18 samples can be run consecutively.
The HI921 Autosampler interfaces directly with the HI902C to access Once the Autosampler sequence is complete, two reports are available
titration methods. Once a titration method is established, the user for review: a sequence report featuring a table outlining each sample
can fully customize the automation sequence of their samples for this name, beaker position, sample size, and result for the tray, and a
method. Sample names and size can be customized or auto-filled with detailed titration report for each individual sample, including the graph
preset values. One beaker can be designated for storage purposes of the titration data.
4.10 | www.hannainst.com
4
Titration
Aspirate completed samples into a waste
Optical IR Beaker Detection container.
An optical IR beam is able to detect the
presence or absence of beakers within Use with the HI902 Automatic
the sample tray. Users can dictate the
Autosampler action if a beaker is missing from Titration System
the tray during a titration sequence. If a beaker Flexible, accurate detection of the titration
is detected as missing, the HI921 can skip over endpoint with HI902C potentiometric titrator.
the sample or stop the titration sequence.
Real-time progress of the sequence and
Versatile Electrode Holder results shown on the HI902 titrator screen.
Control Panel
The included control panel features multiple buttons
to allow for manual operation of the Autosampler tray,
electrode holder, and any auxiliary pumps. A two-line
backlit display on the handheld panel clearly displays
status information. Manual control with the control
panel is desirable for calibration, sample preparation, and
method optimization.
www.hannainst.com | 4.11
Peristaltic and Membrane Pumps
4 • Up to three peristaltic pumps can be added at anytime
• User replaceable pump systems
• Peristaltic pumps
·· Uses high performance plastic that is engineered to
be chemically resistant and have long service life.
·· Reagent addition, sample leveling, waste removal
·· Greater than 200 mL/min flow
• Membrane pumps
·· Simple plug connection for tubing
·· Greater than 400 mL/min flow
any time with the user-replaceable pump systems on the HI921. The
peristaltic pumps use high performance plastic that is engineered to
be chemically resistant with a long service life. These pumps have a
flow greater than 200 mL/min and can be utilized for reagent addition,
sample leveling, and waste removal. The membrane pump is a simple
plug connection for tubing that has a flow greater than 400 mL/min.
4.12 | www.hannainst.com
4
Titration
Specifications HI921
3 x 12-mm electrodes 16 beakers x 150 mL (HI920-11660)
Electrode Holder Slots 1 aspiration tube built-in RFID, transmits the tray type and serial number to Autosampler
1 overhead stirrer Beakers HI920-060 (120 mL), fits HI920-11660 tray - 20 plastic beakers
Temperature Sensor HI7662-A (included) HI920-053 (100 mL), fits HI920-11853 tray - 20 plastic beakers
built-in magnetic stirrer buttons for manual operation of tray and titration head
Stirrers
overhead propeller stirrer (optional) Control Panel manual operation of peristaltic or membrane pumps
Membrane Pump (for cleaning) installs in slot #4 Report Storage up to 40 trays of samples (e.g.: 720 reports for 18-beaker tray)
HI921 —
Choose your
Autosampler x=
1 16 sample tray x y z
2 18 sample tray
configuration:
0 no peristaltic pump
Ordering 1 one peristaltic pump
y=
Information 2 two peristaltic pumps
3 three peristaltic pumps
0 no membrane pump
z=
1 one membrane pump
Titration solutions and reagents begin on page 4.40; See accessories on page 4.41 www.hannainst.com | 4.13
HI901C
4.14 | www.hannainst.com
Titration Capabilities Flexible GLP Management Connectivity and
Dynamic Titrant Dosing
All necessary GLP (Good Laboratory Practice)
information can be recorded with each sample Functionality 4
including: sample identification, company and
The dynamic dosing feature allows for timely
and accurate titration results by relating the operator name, date, time, electrode ID codes, Multifunctional with Four
titrant volume dosed to the mV response and calibration information.
from the titration reaction. This provides for
Working Modes
larger doses near the beginning of a titration The HI901C functions as a titrator, pH meter,
and smaller, more precise doses near the mV/ORP meter, and ISE meter. Valuable
titration endpoint. laboratory bench space is saved, and multiple
analyses can be performed on one sample.
Signal Stability Timing
The signal stability feature monitors when
the mV response of the titration reaction
stabilizes before providing the next titrant
dose. This ensures reliable measurement
values throughout the length of a titration.
Titration
Equivalence Endpoint Detection
Equivalence endpoint detection is critical in
applications where fixed endpoints are not
specified in standard methods. This endpoint
indicates where the mV response from the Effortless Data Transfer
titration is greatest with respect to the
volume of titrant dosed.
Data can easily be transferred to a USB Multiple Connections
flash drive or PC with the Hanna HI900PC
The titrator offers device support for two
Multiple Titration Types application software. The USB port allows
burrettes and two analog boards, which
for the transfer of titration methods,
Paired with the right electrode from our allows two electrodes and two stirrers to
titration reports, and software upgrades via
sensor line, our potentiometric titrator be simultaneously connected to one unit
can perform acid/base, redox (ORP), USB flash drive.
(HI901C2-01 and HI901C2-02 only).
complexometric, precipitation, non-aqueous,
argentometric, and titrations with an ion
selective electrode. Methods of Analysis Multiple Peripherals
Users can print reports directly from the
Customizable Methods
Interface and Display
titrator using a standard parallel printer.
An external monitor and keyboard may be
The HI901C can store up to 100 user-defined
attached for added versatility, as well as an
Detailed Titration Graphs or standard titration methods. Each method
analytical balance for automatic sample mass
may be customized and optimized for
A real-time titration curve can be displayed entry for titrations.
during each titration; this feature is useful performance based on application and user
when new methods are tested or when a requirements.
procedure requires optimization.
Titration Method Support
Interactive Color Display
Onsite installation, training, and customization
A large, color LCD screen clearly shows the
chosen titration method along with results, is available from one of our Applications or
units, titration volume, temperature, and mV Service experts. Hanna offers continued
or pH values. The HI901C also offers multi- support via phone or webinar for any questions
language support. you might have along the way.
www.hannainst.com | 4.15
Versatile Data Management • Data can be transferred to a PC using Hanna HI900PC software
4.16 | www.hannainst.com
4
Specifications HI901C
Range -2.0 to 20.0 pH; -2.00 to 20.00 pH; -2.000 to 20.000 pH
Resolution 0.1 mV
mV
Accuracy
±0.1 mV
(@25°C/77°F)
Titration
Accuracy
±0.5% monovalent; ±1% divalent
(@25°C/77°F)
Burette Auto-Detection burette size is automatically recognized when inserted into the pump unit
Programmable Stirrer overhead propeller type, 200-2500 RPM, resolution 100 RPM
Temperature
manual (MTC) or automatic (ATC)
Compensation
Endpoint Determination equivalence point (1st or 2nd derivative) or fixed pH/mV value
pH Calibration up to five-point calibration, eight standard buffers and five custom buffers
Measurement Units user-specified expression of concentration units to suit specific calculation requirements
Real Time & mV-volume or pH-volume titration curve, 1st derivative curve or 2nd derivative curve
Stored Graphs pH mode, mV mode or ISE mode: pH/mV/concentration versus time
Data Storage up to 100 titration and pH/mV/ISE reports
USB Host (Side) flash drive compatibility for transfers of methods and reports
Peripherals (Rear) connections for VGA display, PC-keyboard, parallel printer, USB device input, RS232
100-240 VAC
Power "-01" models, US plug (type A)
"-02" models, European plug (type C)
Weight approximately 9 kg (20 lbs.) with one pump, stirrer and sensors
HI901C1-01 and HI901C1-02: titrator with one analog board, overhead propeller stirrer with stand, 25 mL glass burette, dosing pump drive,
Ordering temperature sensor, USB cable, 256 Mb USB flash drive and PC software.
Information HI901C2-01 and HI901C2-02: titrator with two analog boards, overhead propeller stirrer with stand, 25 mL glass burette, dosing pump,
temperature sensor, USB cable, 256 Mb USB flash drive and PC software.
Titration solutions and reagents begin on page 4.40; See accessories on page 4.41 www.hannainst.com | 4.17
HI903
4 Karl Fischer
Volumetric
Titrator
for Moisture Determination
System
The titration vessel is completely sealed to
Anti-Diffusion Dispensing Tip minimize exposure to ambient humidity, keep
the system dry, and reduce titrant consumption
A specially designed glass dispensing tip Efficient Sample Handling while saving time between titrations. Solvent
delivers titrant precisely into high turbulence
The HI903 features a quick-remove sample may be exchanged in a matter of seconds
mixing zones, ensuring a rapid reaction. Its
angular construction helps prevent titrant port with a replaceable rubber septum without opening the titration vessel.
from diffusing into the sample solvent. allowing for fast and easy sample introduction
to the titration vessel. An integrated Visually Recognizable Desiccant
Chemically Resistant Tubing magnetic stirrer ensures homogeneity for an
A rechargeable, color-indicating, silica gel
accurate and speedy reaction.
and Syringe desiccant prevents the ingress of ambient
humidity into the sealed system while
Aspiration and dispensing tubes are
Chemically Resistant Titration Vessel maintaining full titrator functionality. The
constructed of durable, chemically
resistant PTFE and feature a light-blocking The glass and PTFE titration cell and fittings desiccant color change allows a user to recognize
polyurethane outer sleeve to protect light are designed to withstand the harsh solvents when it’s adsorption capacity has depleted and
sensitive reagents. and reagents involved in Karl Fischer reactions. is ready for replacement or recharging.
4.18 | www.hannainst.com
Flexible GLP Management
All necessary GLP (Good Laboratory Practice)
information can be recorded with each sample
4
including: sample identification, company
and operator name, date, time, electrode ID
codes, and calibration information.
Titration
Methods of Analysis
Customizable Methods
The HI903 can store up to 100 user-defined
or standard titration methods. Each method
may be customized and optimized for
Titrator Capabilities Multistage Cell Preparation performance based on application and user
A pre-titration stage eliminates residual requirements.
Dynamic Titrant Dosing water present in the solvent and the cell,
providing a reliable baseline start to analysis.
The dynamic dosing feature allows for timely Titration Method Support
Standby mode then keeps the solvent dry
and accurate titration results by relating the Onsite installation, training, and
between titrations and when the titrator is
titrant volume dosed to the mV response not in use. customization is available from one of our
from the titration reaction. This provides for Applications or Service experts. Hanna offers
larger doses near the beginning of a titration continued support via phone or webinar for
and smaller, more precise doses near the
titration endpoint.
Interface and Display any questions you might have along the way.
www.hannainst.com | 4.19
Versatile Data Management • Data can be transferred to a PC using Hanna HI900PC software
4.20 | www.hannainst.com
Specifications HI903
Range
Resolution
100 ppm to 100%
1 ppm to 0.0001%
4
Titration
Result Units %, ppm, mg/g, µg/g, mg, µg, mg/mL, µg/mL, mg/pc, µg/pc
Sample Type liquid or solid
Pre-Titration Conditioning automatic
Background Drift Correction automatic or user-selectable value
Determination Endpoint Criteria fixed mV persistence, relative drift stop or absolute drift stop
Dosing dynamic with optional pre-dispensing rate
Result Statistic mean, standard deviation
Titration
Burette System Tubing PTFE with light block and thermal jacketing
Dispensing Tip glass, fixed position, anti-diffusing
Titration Vessel conical with operation volume between 50-150 mL
Solvent Handling System sealed system, integrated diaphragm air pump
Type HI76320 dual platinum pin, polarization electrode
Connection BNC
Polarization Current 1, 2, 5, 10, 15, 20, 30 or 40 µA
Electrode
Voltage Range 2 mV to 1000 mV
Voltage Resolution 0.1 mV
Accuracy (@25°C/77°F) ±0.1 %
Type magnetic, optically regulated, digital stirrer
Stirrer Speed 200-2000 rpm
Resolution 100 rpm
Laboratory Analytical
RS232 to connect any laboratory balance
Peripheral Devices Balance
Printer print directly from the HI903 to a printer via parallel port
100-240 VAC
Power "-01" models, US plug (type A)
"-02" models, European plug (type C)
Specifications HI76320
Operating Environment 10 to 40°C, up to 95% RH
Storage Environment -20 to 70°C, up to 95% RH dual platinum pin
Sensor Type
polarization electrode
Dimensions 390 x 350 x 380 mm (15.3 x 13.8 x 14.9”)
Voltage Range 2 mV to 1000 mV
Weight approximately 10 kg (22 lbs.)
Voltage Resolution 0.1 mV
HI903-01 and HI903-02 are supplied with HI76320 dual platinum pin electrode, dosing
pump, 5 mL burette assembly with tubing, air pump assembly with tubing, beaker and Accuracy
±0.1%
Ordering bottle top assemblies and all fittings, desiccant cartridges (4) with indicating desiccant, (@25°C/77°F)
Information stir bar, waste bottle, calibration key, USB cable, power cable, HI900PC application,
Polarization Current 1, 2, 5, 10, 15, 20, 30 or 40 μA
USB flash drive, quality certificate, ISO 8655 burette compliance report and instruction
manual binder. Sensor Connection BNC
Titration solutions and reagents begin on page 4.40; See accessories on page 4.42 www.hannainst.com | 4.21
HI904
4 Karl Fischer
Coulometric
Titrator
The HI904 Karl Fischer (KF) Coulometric
Titrator is an automatic titrator that
complements our wide range of products
dedicated to efficient and accurate
laboratory analysis. The HI904 analyzes for
water content ranging from 1 ppm to 5%. This
powerful titrator effectively monitors the KF
reaction, detects the endpoint, and performs
Titration
Coulometric Reagent
System
Precision Iodine Generation
Hanna's dosing algorithm allows for an
extremely small amount of iodine necessary
for the Karl Fischer reaction to be generated
electrolytically using a pulsed current up
to 400 mA delivering titrant accurately
and precisely.
4.22 | www.hannainst.com
Selectable Endpoint Criteria Data & Storage Titration Method Support
The HI904 employs a dual platinum pin Onsite installation, training, and 4
electrode for bivoltammetric endpoint Customizable Titration Reports customization is available from one of our
determination. Users may choose termination Applications or Service experts. Hanna offers
criteria based on mV stability times or Each titration report is fully customizable
continued support via phone or webinar for
drift rates. so users can ensure they are storing and
any questions you might have along the way.
filing the appropriate data required for their
Multistage Cell Preparation application and procedures.
Adaptable Standard Methods
A pre-titration stage eliminates residual
water present in the solvent and the cell,
Flexible GLP Management Our technical experts can program and
customize standard methods developed by
providing a reliable baseline start to analysis. All necessary GLP (Good Laboratory Practice)
such affiliations as ISO, ASTM, AOAC, AOCS,
Standby mode then keeps the solvent dry information can be recorded with each sample
EPA, and more directly onto your titrator.
between titrations and when the titrator is including: sample identification, company
not in use. Ask our Sales Consultants which standard
and operator name, date, time, electrode ID
methods are possible with our HI904 Karl
codes, and calibration information.
Fischer system.
Titration
Interface & Display Effortless Data Transfer
Detailed Titration Graphs Data can easily be transferred to a USB Connectivity and
flash drive or PC with the Hanna HI900PC
A real-time titration curve can be displayed
application software. The USB port allows Functionality
during each titration; this feature is useful
when new methods are tested or when a for the transfer of titration methods,
procedure requires optimization. titration reports, and software upgrades via Configurable Balance Interface
USB flash drive. Sample size may be automatically entered
Interactive Color Display from any laboratory analytical balance with
a RS232 serial output saving time and labor.
A large, color LCD screen clearly shows the
chosen titration method along with results,
Methods of Analysis
units, drift rate, and mV value. Multiple Peripherals
Customizable Methods
Users can print reports directly from the
Simple and Quick Navigation The HI904 can store up to 100 user-defined titrator using a standard parallel printer.
Virtual key selections present on the or standard titration methods. Each method An external monitor and keyboard may be
display allow for simple and quick navigation may be customized and optimized for attached for added versatility, as well as an
between screens and menus without getting performance based on application and user analytical balance for automatic sample mass
lost in a nest of information. requirements. entry for titrations.
www.hannainst.com | 4.23
Versatile Data Management • Data can be transferred to a PC using Hanna HI900PC software
4.24 | www.hannainst.com
4
Specifications HI904
Range 1 ppm to 5%
Result Units %, ppm, ppt, mg/g, µg/g, mg, µg, mg/mL, µg/mL, mg Br/100g, g Br/100g, mg Br, g Br
Titration
Sample Type liquid or solid (external dissolution / extraction)
Reagent Handling System sealed system with integrated diaphragm air pump and beaker adapter
Titration
Generator Electrode Current Control automatic or fixed (400 mA)
Background Drift
automatic or user-selectable value
Correction
Determination
Endpoint Criteria fixed mV persistence, relative drift stop, or absolute drift stop
Dosing dynamic
Polarization Current 1, 2, 5, or 10 µA
Accuracy
±0.1%
(@25°C/77°F)
PC easily view, transfer, print or delete methods and reports via HI900 PC application
USB Flash Drive easily upgrade software or transfer methods and reports between devices using a USB drive
Laboratory Analytical
RS232 to connect a laboratory analytical balance
Peripheral Devices Balance
Monitor instrument status and titrations can be viewed on a larger screen using any VGA compatible external monitor
GLP Conformity Good Laboratory Practice and instrument data storage and printing
100-240 VAC
Power "-01" models, US plug (type A)
"-02" models, European plug (type C)
Dimensions / Weight 390 x 350 x 380 mm (15.3 x 13.8 x 14.9”); approximately 10 kg (22 lbs.)
HI904D-01 and HI904D-02 are supplied with diaphragm, HI904-01 and HI904-02 are supplied without diaphragm
All Models Include: dual platinum pin electrode, air pump assembly, titration vessel assembly (glass vessel, accessory port stopper, sample port
Ordering cap and septum, stir bar, desiccant, desiccant cartridge, fittings), vessel support with adapter, pump locking screw with plastic head, reagent
bottle assembly ( bottle cap, desiccant, desiccant cartridge, fittings, tubing (silicone and PTFE)), water bottle assembly (waste bottle, bottle cap,
Information
desiccant, desiccant cartridge, fittings, tubing (silicone and PTFE)), calibration key, reagent exchange adapter, accessory holder assembly, joint
grease, Karl Fischer generator electrode (removable generator electrode cable), USB cable, USB storage device, HI900 PC application software,
power adapter, quality certificate and instruction manual binder.
Titration solutions and reagents begin on page 4.40; See accessories on page 4.42 www.hannainst.com | 4.25
HI84530
4 Total Titratable
Acidity Titrator and
pH Meter
for Water Analysis
• Log-on-demand
·· Log data up to 400 samples (200
for titration; 200 for pH/mV)
• Graphic mode/exportable data
·· Displays in-depth data on titration,
which can then be stored and
exported to either a USB drive or
PC using the USB connection
• Automatic stirrer speed control
·· Maintains stirrer speed at
approximately 600 rpm regardless
of viscosity of solution
• GLP features
·· Date, time, offset, slope
and buffers used
• Easy-to-use interface
·· User intuitive design with large keys
and easy to navigate screens
• HELP features
·· Dedicated HELP key for
content sensitive help
• pH/mV meter
·· Doubles as a benchtop pH meter
An Easy-to-Use, Fast and accurate. Pump calibrations are performed reading when the HI84530 is used as a pH
with the provided Hanna standard and help meter but also an accurate titration since the
Affordable All-in-one Solution assure the accuracy of the measurement. endpoint is determined by a set pH value.
The HI84530 is an easy to use, fast and
affordable mini automatic titrator with a pH An intuitive interface makes the instrument Total Titratable Acidity
simple to use and the dedicated HELP key
meter designed for the rapid and accurate Water acidity is an important parameter
guides the user through set-up, calibration
analysis of Total Titratable and Strong Acidity to monitor as it can affect the corrosive
status, and troubleshooting.
in water. This new generation of mini automatic capacity of a water, chemical reaction rates
titrator improves upon the titrant delivery This mini titrator includes a pre-programmed and biological processes. Acidity can also be
system and measuring ranges for increased analysis method based on the Standard used to monitor pollution in wastewater and
accuracy compared to previous models. This Methods of Water and Wastewater drinking water.
meter reflects Hanna’s years of experience as a Determination. It uses a powerful algorithm
manufacturer of analytical instruments. which analyzes the shape of the electrode Total titratable acidity is a measure of all
response in order to determine when the of the acid compounds present in a sample.
The HI84530 incorporates a precise piston titration reaction has reached completion. Many factors can contribute to the acidity
dosing system, which allows for a highly of water in a sample, including strong acids
accurate determination of the amount of This mini titrator is also designed to be used (hydrochloric, sulfuric, nitric, etc.), weak acids
titrant used. It is also capable of dynamic as a benchtop pH/mV meter. The CAL Check (organic acids) and other acidic components
dosing, making testing both faster and more function not only ensures an accurate pH (aluminum, iron, etc.).
4.26 | www.hannainst.com
On-screen Features 4
Easy and clear measurement pH meter with electrode Titration curve displayed on
The HI84530 is a single parameter titrator condition on display screen
designed to measure total acidity in a
The HI84530 also functions as a pH meter. The HI84530 offers real time graphing of
few easy steps. The HI84530 displays
Titration
The HI84530 also displays the electrode the titration curve on the LCD.
the results directly on the screen in user-
condition on the LCD using Hanna’s
selectable units.
exclusive electrode diagnostics.
Specifications HI84530
Low Range: 15.0 to 400.0 mg/L; 0.3 to 8.0 meq/L
Range (as CaCO₃ )
High Range: 300 to 4000 mg/L; 6.0 to 80.0 meq/L
Titration Principle fixed endpoint titration : 8.30 pH (phenolphthalein ) or 3.7 pH (Methyl Orange)
Temperature
manual or automatic from -20 to 120 °C (-4 to 248 °F)
Compensation
pH Electrode HI1131B glass body pH electrode with BNC connector and 1 m (3.3’) cable (included)
Temperature Probe HI7662-T stainless steel temperature probe with 1 m (3.3’) cable (included)
Additional Connectivity (1) Type-B USB for PC interface, (1) Type-A USB for storage
Specifications Environment 0 to 50 °C (32 to 122 °F); max 95% RH non-condensing
HI84530-01 (115V) and HI84530-02 (230V) are supplied with HI1131B pH electrode, HI7662-T temperature probe, HI7082 electrode
Ordering
fill solution, HI84530-70 reagent kit for water analysis, 100 mL beakers (2), dosing pump valve, 5 mL syringe, 1 mL plastic pipette, tube set
Information (aspiration tube with titrant bottle cap and dispensing tube with tip), stir bar, power adapter, instruction manual and quality certificate.
Titration solutions and reagents begin on page 4.40; See accessories on page 4.43 www.hannainst.com | 4.27
HI84531
4 Titratable Alkalinity
Titrator and pH Meter
for Water Analysis
An Easy-to-Use, Fast and The dispensed titrant volume is used to chemicals, including carbonate, bicarbonate,
automatically calculate the alkalinity, which hydroxide, phosphates, borate and organic
Affordable All-in-one Solution can be displayed in mg/L or meq/L as CaCO₃.
acid salts.
The HI84531 is a dedicated mini titrator and
pH meter designed for low to high levels This mini titrator is also designed to be used
The alkalinity of a water sample indicates
of alkalinity. It performs a potentiometric as a benchtop pH/mV meter. The CAL Check
titration with a pH electrode to determine total function not only ensures an accurate pH its ability to resist pH change. The amount
titratable alkalinity or strong alkalinity in water. reading when the HI84531 is used as a pH of alkalinity in water is mostly due to the
A titrant is slowly added to the sample while the meter but also an accurate titration since the bicarbonate/carbonate present. A low
pH and temperature are carefully monitored. endpoint is determined by a set pH value.
alkalinity level indicates that the water is
The software analyzes the resulting titration
curve and calculates the volume of titrant susceptible to pH changes, while a high
Total Alkalinity
required to reach the endpoint. The user can alkalinity level indicates that the water will be
choose either to measure strong alkalinity with Total titratable alkalinity is a measure of
able to resist pH changes. Alkalinity can also
a 8.30 pH endpoint (known as phenolphthalein primarily three types of alkalinities present
be used to determine the corrosive capacity
alkalinity) or total alkalinity with a 4.50 pH in a water sample: hydroxide, carbonate
endpoint (known as bromcresol green-methyl and bicarbonate. Alkalinity in water can be of water and can provide an estimation of
red alkalinity). the result of contributions from common water hardness.
4.28 | www.hannainst.com
On-screen Features 4
Easy and clear measurement Electrode condition on display Titration Curve Displayed On
These titrators are designed to measure in These titrators feature a pH meter which Screen
a few easy steps. The results are displayed also displays the electrode condition on
The HI84531 offers real time graphing of
directly on the screen. the LCD.
Titration
the titration curve on the LCD.
Specifications HI84531
Low Range: 30.0 to 400.0 mg/L; 0.6 to 8.0 meq/L
Range (as CaCO₃)
High Range: 300 to 4000 mg/L; 6.0 to 80.0 meq/L
Titration Principle endpoint titration : 8.30 pH (phenolphthalein) / 4.50 pH (bromcresol green-methyl red)
Calibration one, two or three-point calibration; four available buffers (4.01, 7.01, 8.30, 10.01)
mV Resolution 0.1 mV
pH Electrode HI1131B glass body pH electrode with BNC connector and 1 m (3.3’) cable (included)
Temperature Probe HI7662-T stainless steel temperature probe with 1 m (3.3’) cable (included)
Additional Connectivity (1) Type-B USB for PC interface, (1) Type-A USB for storage
Specifications Environment 0 to 50 °C (32 to 122 °F); max 95% RH non-condensing
HI84531-01 (115V) and HI84531-02 (230V) are supplied with HI1131B pH electrode, HI7662-T temperature probe,HI7082 electrode fill
Ordering solution, HI84531-70 reagent kit for water analysis, 100 mL beakers (2), dosing pump valve, 5 mL syringe, 2000 μL automatic pipette (1)
Information with plastic tips (2), 20 mL beakers (2), tube set (aspiration tube with titrant bottle cap and dispensing tube with tip), stir bar, power adapter,
instruction manual and quality certificate.
Titration solutions and reagents begin on page 4.40; See accessories on page 4.43 www.hannainst.com | 4.29
HI84529
4 Titratable Acidity
Mini Titrator and pH
Meter
for the Dairy Industry
An Easy-to-Use, Fast and a powerful algorithm which analyzes the acidity is the neutralizing capacity of a dairy
electrode response in order to determine product with NaOH.
Affordable All-in-one Solution when the titration reaction has reached
The HI84529 is an easy-to-use, fast and completion. By simply pressing the START An increase in acidity can be caused by
affordable mini automatic titrator and pH key, the HI84529 automatically performs a bacteria formation. Monitoring acidity
meter designed for testing acidity levels pH endpoint titration and displays results is a way of determining the quality and
in dairy products. This new generation immediately in a choice of units. freshness of dairy products. Acidity is
of mini automatic titrator improves upon determined by a pH endpoint titration using
the titrant delivery system and measuring sodium hydroxide (NaOH), and is defined
Acidity Measurement and as the consumption necessary to shift the
ranges for increased accuracy compared to
previous models. This meter reflects Hanna’s its Significance in the Dairy pH value from 6.6 (corresponding to fresh
milk) to a pre-determined pH value. While
years of experience as a manufacturer Industry
of analytical instruments. pH 7.0 is the actual point of neutralization,
There are two fundamentally different phenolphthalein is commonly employed as
This mini titrator includes a pre-programmed measurements of dairy products: titratable a color indicator to determine the endpoint
analysis method designed for acidity acidity and pH. pH is a measurement of of reaction; with phenolphthalein, a color
measurements for dairy analysis. It uses hydrogen ion concentration while titratable change occurs at pH 8.3. Titratable acidity
4.30 | www.hannainst.com
is expressed in a variety of units based on the one which reflects the Eliminate Subjectivity and Increase Efficiency
4
titration method and strength of NaOH used during titration.
The HI84529 Mini Titrator eliminates the subjective endpoint color
Titratable acidity can be expressed in several units. Each of these units change detection determined by the human eye, and instead employs
corresponds to a specific procedure used to titrate dairy products. the sensitivity and accuracy of a pH sensor. The titration method is
% Lactic Acid (% l.a.): is determined by titrating a 20 mL or 20 g a potentiometric endpoint determination using a pre-determined
sample diluted with twice its volume of deionized or distilled water pH value.
with 0.1 M sodium hydroxide to a phenolphthalein endpoint.
The titratable acidity values will vary depending on the method used.
Degree Soxhlet Henkel (°SH): is determined by titrating a 50 mL Select Low 50 to titrate a non diluted sample, or select low 20/High 20
sample with 0.1 M sodium hydroxide to a phenolphthalein endpoint. to titrate 20 mL or 20 g samples that are diluted with twice its volume
or deionized or distilled water. The HI84529 uses methods based on
Degree Dornic (°D): is determined by titrating a 100 mL sample with N/9
sodium hydroxide to a phenolphthalein endpoint. AOAC International and Standard Methods for the Examination of
Dairy Products. Both of these methods report titratable acidity as %
Degree Thörner: is determined by titrating a 10 mL sample diluted lactic acid, a rough conversion factor can be used to convert the results
with twice its volume of deionized or distilled water with 0.1 M sodium
Titration
to the other available units.
hydroxide to a phenolphthalein endpoint.
From: To: Divide By: The HI84529 can be customized to meet the needs of any dairy
%l.a. °SH 0.0225 analysis lab. Samples can be titrated by weight or volume, diluted or
%l.a. °D 0.0100 non-diluted (low range only) and titrated to a fixed pH endpoint that
%l.a. °Th 0.0090
can be adjusted by the user.
Specifications HI84529
Low Range: %l.a.: 0.01 to 0.20; °SH: 0.4 to 8.9; °D: 1.0 to 20.0; °Th: 1.1 to 22.2
Range
High Range: %l.a.: 0.1 to 2.0; °SH: 4.4 to 88.9; °D: 10 to 200; °Th: 11.1 to 222.2
Low Range: %I.a.: 0.01 ; °SH: 0.1; °D: 0.1; °Th: 0.1
Resolution
High Range: %I.a.: 0.1; °SH: 0.1; °D: 1; °Th: 0.1
HI84529-01 (115V) and HI84529-02 (230V) are supplied with HI84529-70 Reagent Kit for titratable acidity in dairy products, FC260B pH
Ordering electrode, HI5315 reference electrode, HI7662-M temperature probe, HI7072 fill solution (30 mL), HI700640 cleaning solution for milk deposits
Information (2 x 20 mL), capillary dropper pipette, 100 mL beakers (2), dosing pump valve, 5 mL syringe, 1 mL plastic pipette, tube set (aspiration tube with
titrant bottle cap and dispensing tube with tip), stir bar, power adapter, instruction manual and quality certificate.
Titration solutions and reagents begin on page 4.40; See accessories on page 4.44 www.hannainst.com | 4.31
HI84532
4 Titratable Acidity
Mini Titrator and
pH Meter
for Fruit Juice
An Easy-to-Use, Fast and The HI84532 incorporates a precise piston the most important factors to determine how
dosing system, which allows for a highly well fruit will store and how it will taste. For
Affordable All-in-one Solution accurate determination of the amount some fruits, governmental quality standards
The HI84532 digital automatic mini titrator of titrant used. It is capable of dynamic (based on titratable acidity or the ratio
and pH meter is designed for measuring dosing, making testing both faster and more of total soluble solids (°Brix) to titratable
the concentration of titratable hydrogen accurate. Pump calibrations, performed with acidity) are in place to protect consumers.
ions contained in fruit juice samples by the provided Hanna standards, help assure Immature fruit will normally have a low sugar
neutralization with a strong base solution to the measurement accuracy.
to acid ratio as compared to mature fruit that
a fixed pH endpoint as according to the Official
will have a high sugar to acid ratio.
Methods of Analysis of AOAC International. This mini titrator is also designed to be used
This new generation of mini automatic as a benchtop pH/mV meter. The CAL Check
The HI84532 measures the concentration
titrator improves upon the titrant delivery function not only ensures an accurate pH
of titratable acids contained in fruit juice
system and measuring ranges for increased reading when the HI84532 is used as a pH
samples by neutralization with a strong base
accuracy compared to previous models. This meter but also an accurate titration since the
solution to a fixed pH. This value includes all
meter reflects Hanna’s years of experience endpoint is determined by a set pH value.
the substances of an acidic nature in the fruit
as a manufacturer of analytical instruments.
juice including: free hydrogen ions, organic
The Importance of Titratable
A clear and intuitive user interface allows acids and acid salts. Titratable acidity is
users to easily navigate the HI84532’s menus
Acidity expressed as g/100 mL of the predominant
and functions. The HELP key located on the Titratable acidity is an important parameter acid. The predominant acids in fruit depend
keypad aids in on-screen set-up, status and in determining fruit maturity and sour taste on the type of fruit being tested and include
troubleshooting. in citrus fruits. The maturity of fruit is one of citric acid, tartaric acid, and malic acid.
4.32 | www.hannainst.com
On-screen Features
4
Titration
Titration curve displayed on Log and recall data Tutorial and help screens
screen The HI84532 can log up to 400 samples (200 Accessing the tutorial menu provides
for titration; 200 for pH/mV) and recall or helpful information during calibration and
The HI84532 offers real time graphing of the
export data to a USB drive or PC. titration.
titration curve on the LCD.
Specifications HI84532
HI84532-01 (115V) and HI84532-02 (230V) are supplied with HI84532-70 reagent Kit for titratable acidity in fruit juice, HI1131B pH electrode,
Ordering
HI7662-T temperature probe, HI7082 electrode fill solution (30 mL), 100 mL beakers (2), 20 mL beaker, tube set (aspiration tube with titrant bottle cap
Information and dispensing tube with tip), dosing pump valve, 5 mL syringe, 1 mL plastic pipette, stir bar, power adapter, instruction manual and quality certificate.
Titration solutions and reagents begin on page 4.40; See accessories on page 4.44 www.hannainst.com | 4.33
HI84533
4 Formol Number
Mini Titrator and
pH Meter
for Wines and Fruit Juices
An Easy-to-Use, Fast and This mini titrator includes a user adjustable Why Formol Number is an
programmed analysis method designed
Affordable All-in-one Solution Important Determination
for formol number analysis. It employs a
The HI84533 is an easy to use, fast and powerful and effective algorithm to analyze The content of amino-acids and other nitrogen
affordable mini automatic titrator designed the pH response to determine the exact pH compounds in fruit juices and wines is expressed
for the rapid and accurate determination of as total assimilable nitrogen and is determined
endpoint, then uses this algorithm to perform
formol number in wines or fruit juices. This by the formol method using an acid-base
the necessary calculations.
new generation of mini automatic titrator titration. The formol number (also known as
improves upon the titrant delivery system formol index) is a parameter used for evaluation
This mini titrator is also designed to be used
and measuring ranges for increased accuracy of the quality of fruit juices and wines.
as a benchtop pH/mV meter. The CAL Check
compared to previous models. This meter
function not only ensures an accurate pH In wines, the concentration of alpha amino
reflects Hanna’s years of experience as a
reading when the HI84533 is used as a pH acid in grapes change as a function of
manufacturer of analytical instruments.
meter but also an accurate titration since the maturity and crop load (yield to vine size
The HI84533 incorporates a precise piston endpoint is determined by a set pH value. ratio). The concentration increases with fruit
dosing system which allows for a highly
accurate determination of the amount of
titrant used. It is also capable of dynamic The HI84533 has two operating options:
dosing, making testing both faster and more 1. pH measurement using the meter in pH mode
accurate. A pump calibration performed with 2. Formol number determination by titration of wines and fruit juice
the supplied Hanna standard help assure the samples with sodium hydroxide solution to an 8.2 pH endpoint
accuracy of the measurement.
4.34 | www.hannainst.com
maturation and decreases with crop load. In fermentation, it is desirable to determine the not suitably mature or there has been frost
4
the fermentation of wine, there is a minimum nitrogen concentration before fermentation. damage. In pineapple juice, a low number
amount of amino acid and other nitrogen could be indicative of over-dilution with water
compounds (eg: 150-200 mg/L of yeast In fruit juices, the formol nitrogen number
or a disproportionate amount of the core was
assimilable nitrogen) that has to be present is one of the basic parameters measured to
used. To determine the adulteration of fruit
in the must/juice. Too low of an amount will determine quality. Depending on the type of
result in a stuck fermentation in which there fruit, the number can increase or decrease juices, the formol number, along with the
is not enough nitrogen for the yeast to thrive. with maturity. In orange and grapefruit juice, chromatography characterization of amino
Because of the importance of nitrogen in lower values are observed when the fruit is acids, can be used.
On-screen Features
Titration
GLP Log and recall data Titration curve displayed on
The GLP feature records electrode The HI84533 can log up to 400 samples screen
and pump calibration data to help keep (200 for titration results; 200 for mV/pH) The HI84533 offers real time graphing of
measurements accurate and reliable. and recall or export data to a USB drive or PC. the titration curve on the LCD.
Specifications HI84533
Low Range: 2.14 to 28.57 meq/L; 0.21 to 2.85 meq%; 30.0 to 400.0 mg/L
Range (as N)
High Range: 21.7 to 71.4meq/L; 2.14 to 7.14 meq%; 300 to 1000 mg/L
Low Range: 0.01 meq/L; 0.01 meq%; 0.1 mg/L
Resolution
High Range: 0.1 meq/L; 0.01 meq%; 1 mg/L
Accuracy (@25°C/77°F) ±0.1 mg/L or 3 % of reading, whichever is greater
Titrator Low Range: 10 mL
Sample Volume
High Range: 5 mL
Method acid-base titration
Principle endpoint titration, adjustable (pH 8.0 - 8.5 in 0.1 increments)
Pump Speed 10 mL/min
Stirring Speed 600 rpm
Range -2.0 to 16.0 pH / -2.00 to 16.00 pH
Resolution 0.1 pH / 0.01 pH
pH Meter Accuracy (@25°C/77°F) ±0.01 pH
Calibration one, two, or three-point calibration; 4 available buffers (4.01; 7.01; 8.20; 10.01)
Temperature Compensation manual or automatic
Range -2000.0 to 2000.0 mV
mV Meter Resolution 0.1 mV
Accuracy ±1.0 mV
Range -20.0 to 120.0°C; -4.0 to 248.0°F; 253.2 to 393.2 K
Temperature Resolution 0.1°C; 0.1°F; 0.1 K
Accuracy ±0.4°C; ±0.8°F; ±0.4 K
Logging Data up to 400 samples (200 pH/mV, 200 titration)
pH Electrode HI1131B glass body, refillable, with BNC connector and 1 m (3.3’) cable (included)
Temperature Probe HI7662-T stainless steel temperature probe with 1 m (3.3’) cable (included)
Additional Connectivity (1) Type-B USB for PC interface, (1) Type-A USB for storage
Specifications Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing
Power Supply 12 VDC adapter (included)
Dimensions 235 x 200 x 150 mm (9.2 x 7.9 x 5.9”)
Weight 1.9 kg (67.0 oz.)
HI84533-01 (115V) and HI84533-02 (230V) are supplied with HI84533-70 reagent kit for formol number in wine and fruit juices, HI1131B pH
electrode, HI7662-T temperature probe, HI7082 electrode fill solution (30 mL), 100 mL beakers (2), tube set (aspiration tube with titrant bottle
Ordering
cap and dispensing tube with tip), dosing pump valve, 5 mL syringe (2), 2000 μL automatic pipette (1) with plastic tips (2), plastic pipette (1 mL),
Information HI731319 stir bar, electrode cleaning solution sachets for wine deposits (2), electrode cleaning solution sachets for wine stains (2),
power adapter, instruction manual and quality certificate.
Titration solutions and reagents begin on page 4.40; See accessories on page 4.45 www.hannainst.com | 4.35
HI84500
4 Sulfur Dioxide
Mini Titrator
for Wine Analysis
An Easy-to-Use, Fast and Why Free & Total Sulfur Dioxide bound. Free SO₂ exists in two forms: bisulfite
(HSO₃̄ ) is the predominant form but is
Affordable All-in-one Solution is Important relatively ineffective and molecular SO₂ is the
The HI84500 is an easy to use, fast and Winemakers add sulfur dioxide to wine minor form and is responsible for protecting
affordable automatic mini titrator designed in order to inhibit bacteria and wild yeast the wine. The amount of molecular SO₂
for testing free or total sulfur dioxide (SO₂) growth and to serve as an antioxidant to available in wine is depended on the amount
levels in wine. It includes a pre-programmed prevent browning. When SO2 is added to wine, of free SO₂ present and the pH. Typically 0.8
analysis method and uses a powerful a portion of it becomes immediately bound ppm of molecular SO₂ provides adequate
algorithm in order to determine when the while a remaining portion is unbound SO₂. The protection against bacteria growth and
titration reaction has reached completion. portion that is unbound is also called free SO₂; oxidation. In order to obtain this value for a
The HI84500 incorporates a precision dosing it is responsible for protecting the wine. wine sample that has a pH of 3.2 you would
pump which allows for a highly accurate
need 22 ppm of free SO₂; if the pH was at 3.5
determination of the amount of titrant The bound and free SO₂ together are referred
you would need double the amount, 44 ppm
used. Pump calibrations, performed with the to as total SO₂. The relationship between the
of free SO₂.
provided Hanna standards, help assure the amount of SO₂ added and the amount of free
measurement accuracy. The HI84500 also SO₂ is complex. This relationship is governed
Molecular SO₂ can be detected by human
features a new low range measurement and by the total amount ofSO₂ in the wine and the
senses at about 2.0 ppm. This level is needed
can also be used as a mV meter for direct ORP ability of compounds (e.g. sugars, aldehydes,
for maximum protection of wine. Higher
measurements. ketonic acid, quinones, anthocyanin) in the
levels are needed for sweet and most
wine to bind SO₂.
This new generation of mini automatic notable, botrytised wine. The HI84500 can
titrator improves upon the titrant delivery The exact relationship between free and be used to test for free and total SO₂ in all
system and measuring ranges for increased bound SO₂ will vary from wine to wine. The wines, including red, which are difficult to
accuracy compared to previous models. This amount of free SO₂ depends on how much test using traditional methods associated
meter reflects Hanna’s years of experience is added, how much was present before the with a distinctive color change to determine
as a manufacturer of analytical instruments. addition, and how much was immediately the endpoint.
4.36 | www.hannainst.com
Application-specific ORP Electrode
The HI84500 is supplied with the HI3148B ORP electrode featuring CPS™ technology to prevent the clogging of the reference junction.
Conventional electrodes may clog quickly in biological samples such as wine. By design, the HI3148B ORP electrode utilizes a ground glass/PTFE
4
sleeve junction which controls a steady, predictable flow of electrolyte solution, keeping the junction open. The hydrophobic properties of PTFE
repels wetness and coatings.
On-screen Features
Titration
Titration curve displayed on ORP GLP
screen During ORP measurements, the stirrer icon Records pump calibration data to ensure
will be displayed when the stirrer is on measurements are accurate and reliable.
The HI84500 offers real time graphing of
the titration curve on the LCD.
Log and recall data Procedure warnings Tutorial and help screens
Log up to 400 samples (200 for titration Users are warned if there is an error in Accessing the tutorial menu provides
results; 200 for ORP/mV) and recall or procedures such as the titration exceeded helpful information during calibration and
export data to a USB stick or PC. the maximum volume of titrant. titration.
Specifications HI84500
Low Range: 1.0 to 40.0 ppm of SO₂
Range
High Range: 30 to 400 ppm of SO₂
Low Range: 0.1 ppm
Resolution
High Range: 1 ppm
Low Range: ±0.5 ppm or 3% of reading, whichever is greater
Accuracy (@25°C/77°F)
Titrator High Range: ±1 ppm or 3% of reading, whichever is greater
Sample Volume 50 mL
Method Ripper method
Principle equivalence point redox titration
Pump speed 10 mL/min
Stirring Speed 700 rpm
Range -2000.0 to 2000.0 mV
ORP Meter Resolution 0.1 mV
Accuracy (@25°C/77°F) ±1 mV
Logging Data up to 400 samples (200 ORP/mV, 200 titration)
Electrode HI3148B glass body ORP electrode with BNC connector and 1 m (3.3’) cable (included)
Connectivity (1) Type-B USB for PC interface, (1) Type-A USB for storage
Additional
Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing
Specifications
Power Supply 12 VDC adapter (included)
Dimensions 235 x 200 x 150 mm (9.2 x 7.9 x 5.9”)
Weight 1.9 kg (67.0 oz.)
HI84500-01 (115V) and HI84500-02 (230V) are supplied with HI3148B ORP electrode, HI7082 electrode fill solution (30 mL), HI84500-
70 reagent kit for SO₂ determination (consisting of: 1 bottle HI84500-50 (230 mL) low range titrant, 1 bottle HI84500-51 high range titrant
Ordering (230mL), 1 bottle HI84500-55 pump calibration standard (120 mL), 1 bottle HI84500-60 acid reagent (230 mL), 1 bottle HI84500-61 alkaline
Information reagent (120 mL) and HI84500-62 stabilizer packets (100 packets)), 100 mL beakers (2), 20 mL beakers (2), scissors, dosing pump valve, 5 mL
syringe, 1 mL plastic pipette, tube set (aspiration tube with titrant bottle cap and dispensing tube with tip), stir bar, electrode cleaning solution
sachets for wine deposits (2), electrode cleaning solution sachets for wine stains (2), power adapter, instruction manual and quality certificate.
Titration solutions and reagents begin on page 4.40; See accessories on page 4.45 www.hannainst.com | 4.37
HI84502
An Easy-to-Use, All-in-one Accuracy is always ensured with Hanna’s moderate amount of a wine’s acid comes from
unique CAL Check feature, which analyzes malic acid, which contributes to fruitiness. A
Solution the response of the electrode during the small amount of titratable acidity comes from
The HI84502 is an easy to use, fast and calibration process. Based on electrode citric acid. Wine also contains trace amounts
affordable automatic mini titrator designed response in the buffer, indicators are
of other acids; the least desirable acid in wine
displayed on screen to alert the user of
for testing total acidity levels in wine. It is acetic acid, which, when present in more
potential problems during calibration. These
includes a pre-programmed analysis method than a nominal amount, gives wine a sour or
indicators include Buffer Contaminated,
and uses a powerful algorithm in order vinegary aspect.
Electrode Dirty/Broken, and overall probe
to determine when the titration reaction
condition.The CAL Check function not only
has reached completion. The results are Total acidity, also called titratable acidity,
ensures an accurate pH reading when the
displayed in g/L as tartaric acid. The HI84502
HI84502 is used as a pH meter but also an is the sum of the fixed and volatile acids. In
incorporates a precision piston driven dosing
accurate titration since the endpoint is the United States the total acidity is usually
pump which allows for a highly accurate
determined by a set pH value. expressed in terms of tartaric acid, even
determination of the amount of titrant
used. Pump calibrations performed with though the other acids are measured.
the provided Hanna standards assure the The Significance of Titratable
accuracy of measurements. Total acidity directly affects the color and
Total Acidity flavor of wine and, depending on the style of
This mini titrator is also designed to be used Acids occur naturally during the growing the wine, is sought in a perfect balance with
as a benchtop pH/mV meter. As a pH meter, of grapes and as part of the fermentation the sweet and bitter sensations of other
it has many features of a professional grade process. Wines show lower levels of acid components. Too much acidity makes wine
benchtop including automatic calibration up when there is a hot growing season or when tart and sharp; too little makes wines flat,
to three points with four available buffers, the grapes come from warmer regions. In
flabby and uninteresting. Proper acidity in
a 0.01 pH resolution, accuracy of ±0.01 pH, the proper proportion, acids are a desirable
wine is what makes it refreshing and an ideal
automatic temperature compensation and trait and give the wine character. The three
comprehensive GLP data. predominant acids in wine are tartaric, malic accompaniment to food. The proper acid level
and citric. Tartaric acid is the principal acid of a wine varies, with sweeter wines generally
The GLP data includes date, time, offset, in grapes and is a component that promotes requiring somewhat higher levels to retain
slope, and buffers used for calibration. a crisp flavor and graceful aging in wine. A the proper balance.
4.38 | www.hannainst.com
On-screen Features 4
Titration
the titration curve on the LCD.
Specifications HI84502
Low Range: 0.1 to 5.0 g/L (ppt) of tartaric acid
Range
High Range: 4.0 to 25.0 g/L (ppt) of tartaric acid
Temperature
manual or automatic
Compensation
pH Electrode HI1048B glass body pH electrode with BNC connector and 1 m (3.3’) cable (included)
Temperature Probe HI7662-T stainless steel temperature probe with 1 m (3.3’) cable (included)
Additional Connectivity (1) Type-B USB for PC interface, (1) Type-A USB for storage
Specifications Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing
HI84502-01 (115V) and HI84502-02 (230V) are supplied with HI1048B pH electrode, HI7662-T temperature probe, HI7082 electrode fill
Solution (30 mL), HI84502-70 reagent kit (consisting of: 1 bottle HI84502-50 (230 mL) titration solution and HI84502-55 (120 mL) pump
Ordering
calibration standard (1 bottle)), (2) 100 mL beakers, dosing pump valve, 2000 µL automatic pipette (1) with plastic tips (2), 5 mL syringe, 1 mL
Information plastic pipette, tube set (aspiration tube with titrant bottle cap and dispensing tube with tip), stir bar, electrode cleaning solution sachets for
wine deposits (2), electrode cleaning solution sachets for wine stains (2), power adapter, instruction manual and quality certificate.
Titration solutions and reagents begin on page 4.40; See accessories on page 4.46 www.hannainst.com | 4.39
4 Titration Solutions and Reagents
Titration
HI70401 potassium hydrogen phthalate, 20 g HI70441 iodine stabilized solution (0.04 N), 1 L
HI70403 sodium thiosulfate pentahydrate, 20 g HI70444 sulfuric acid solution (25%), 500 mL
HI70404 potassium iodide powder packets, 100 packets HI70445 nitric acid solution (1 M), 500 mL
HI70422 silver nitrate (0.1 M), 1L HI70454 sodium hydroxide solution (0.02 N), 1 L
HI70423 sodium hydroxide solution (0.11 N), 1 L HI70455 sodium hydroxide solution (0.01 N), 1 L
HI70425 sulfuric acid solution (16%), 500 mL HI70457 sodium hydroxide solution (1 N), 1 L
HI70426 glyoxal solution (40%), 100 mL HI70458 sulfuric acid solution (0.01 M), 1 L
HI70427 nitric acid solution (1.5 M), 500 mL HI70459 sulfuric acid solution (0.05 M), 1 L
HI70428 sodium hydroxide solution (0.25N), 1 L HI70462 hydrochloric acid solution (0.01 N), 1 L
HI70429 silver nitrate solution (0.05 M), 1L HI70463 hydrochloric acid solution (0.1 N), 1 L
HI70432 hydrogen peroxide solution (3%), 25 mL HI70464 hydrochloric acid solution (1 N), 1 L
HI70433 stabilized iodine solution (0.01 N), 1L HI70465 hydrogen peroxide solution (30%), 25 mL
HI70434 phosphoric acid (85%), 500 mL HI70466 phenylarsine oxide (PAO) solution (0.00564N), 500 mL
HI70435 sodium hydroxide solution (5 M), 500 mL HI70467 pH 4.18 acetate buffer, 230 mL
HI70437 potassium Iodide concentrated (30%) solution, 500 mL HI70469 iodine solution (0.00188N), 230 mL (4)
HI70438 tris buffer set, 1 L HI70471 phenylarsine oxide (PAO) solution (0.000564N), 500 mL
HI70439 sodium thiosulfate solution (0.1 M), 1 L HI70472 pH 7.15 phosphate buffer solution, 230 mL
4.40 | www.hannainst.com
Meter Accessories and Reagents 4
Titration
HI902C and HI901 Automatic Titration System
Accessories HI921 Autosampler Accessories
Code Description Code Description
HI900100 dosing pump HI920-11660 single row with RFID, 16 beaker position, 60mm dia.
50 mL burette assembly (includes syringe, aspiration, HI920-060 120 mL plastic beakers that fit HI920-11660 (20)
HI900150
and dispensing tubes)
HI920-11853 single row with RFID, 18 beaker position, 53mm dia.
25 mL burette assembly (includes syringe, aspiration,
HI900125 HI920-053 100 mL plastic beakers that fit HI920-11853 (20)
and dispensing tubes)
HI920-301 overhead stirrer
10 mL burette assembly (includes syringe, aspiration,
HI900110
and dispensing tubes) HI920-101 peristaltic pump with dispensing tubing
5 mL burette assembly (includes syringe, aspiration, HI920-102 peristaltic pump with aspiration tubing
See HI902C on page 4.6; See HI901 on page 4.14; See HI921 on page 4.10 www.hannainst.com | 4.41
4 Meter Accessories and Reagents
Titration
HI900522 KF beaker (glass only) HI900182 reagent adapter holder (glass only)
HI903 Design, Installation, Operation, and Performance HI904/HI904D Design, Installation, Operation, and Performance
HI900806 HI900807
Qualification (DQ/IQ/OQ/PQ) Documentation Qualification (DQ/IQ/OQ/PQ) Documentation
4.42 | www.hannainst.com See HI903 on page 4.18 ; See HI904 on page 4.22
Meter Accessories and Reagents 4
Titration
HI84530 Total Titratable Acidity Mini Titrator HI84531 Titratable Alkalinity Mini Titrator
and pH Meter Reagents and Accessories and pH Meter Reagents and Accessories
HI84530-51 titrant solution for high range, 120 mL HI84531-51 titrant solution for high range, 120 mL
HI84530-55 pump calibration standard, 230 mL HI84531-55 pump calibration standard, 230 mL
See HI84530 on page 4.26 ; See HI84531 on page 4.28 www.hannainst.com | 4.43
4 Meter Accessories and Reagents
Titration
HI84529 Titratable Acidity Mini Titrator HI84532 Titratable Acidity Mini Titrator
and pH Meter Reagents and Accessories and pH Meter Reagents and Accessories
HI84529-51 titrant solution for high range 20, 120 mL HI84532-51 titrant solution for high range, 120 mL
HI84529-52 titrant solution for low range 50, 120 mL HI84532-55 pump calibration standard, 230 mL
HI70300M storage solution, 230 mL HI7061M general purpose cleaning solution, 230 mL
HI70640M cleaning solution for milk deposits, 230 mL HI7082 pH electrode filling solution, 3.5M KCl, 30 mL (4)
4.44 | www.hannainst.com See HI84529 on page 4.30; See HI84532 on page 4.32
Meter Accessories and Reagents 4
Titration
HI84533 Formol Number Mini Titrator HI84500 Sulfur Dioxide Mini Titrator
and pH Meter Reagents and Accessories for Wine Analysis Reagents and Accessories
HI84533-55 pump calibration standard, 120 mL HI84500-51 titrant solution for high range, 230 mL
HI7007M pH 7.01 buffer, 230 mL HI7082 pH electrode filling solution, 3.5M KCl, 30 mL (4)
HI70082M pH 8.20 buffer, 230 mL HI7021M ORP test solution @ 240 mV (@25°C), 230 mL
HI70300M storage solution, 230 mL HI70635M cleaning solution for wine deposits, 230 mL
HI70635M cleaning solution for wine deposits, 230 mL HI70636M cleaning solution for wine stains, 230 mL
HI70636M cleaning solution for wine stains, 230 mL HI70300M storage solution, 230 mL
HI70500 tube set with cap for titrant bottle, tip and valve HI731319 stir bar, 25 x 7 mm (10)
HI740236 5 mL syringe for mini titrator HI740236 5 mL syringe for mini titrator
See HI84533 on page 4.34; See HI84500 on page 4.36 www.hannainst.com | 4.45
4 Meter Accessories and Reagents
Titration
Conductivity / TDS
Introduction�������������������������� 5.2 Solutions������������������������������������� 5.34
table of contents
Product Spotlights �������������������������������������������� 5.4 Conductivity (EC)��������������������������������������������� 5.34
Comparison Guides�������������������������������������������� 5.5 TDS������������������������������������������������������������������������� 5.39
Salinity������������������������������������������������������������������ 5.40
Quick Cal��������������������������������������������������������������� 5.40
edge®�������������������������������������� 5.6
edge�������������������������������������������������������������������������� 5.6
edge EC������������������������������������������������������������������5.10
Benchtop����������������������������� 5.14
Portable��������������������������������5.19
Ultrapure Water������������������������������������������������5.19
Ultrapure Water and Water
for Injection���������������������������������������������������������5.22
Agriculture Specific���������������������������������������� 5.28
Education�������������������������������������������������������������5.33
www.hannainst.com | 5.1
5 Conductivity/TDS Meters Introduction
current flow. Ions are formed when a salt such as sodium chloride is relationship between the dissolved ions and conductivity is known.
dissolved in water to form particles having electrical charges. Sodium
TDS uses units of mg/L (ppm), or g/L. On some meters the user can
chloride for example, separates into Na+ and Cl¯. This is a simplified
input the TDS factor for the conversion. On more basic units the factor
definition for the measurement is affected by many things such as the
is automatically set to 0.50 A typical
type of ionic compound(s) dissolved in the water; the ions mobility, the
solution viscosity, temperature as well as concentration. TDS factor for strong ionic solutions is 0.5, while for weak ionic
solutions (e.g. fertilizers) is 0.7.
Electrical conductance, the ability of a substance to conduct
an electrical current is the reciprocal of electrical resistance.
TDS = factor x EC₂₅
“Conductance” and “resistance” depend on the geometrical dimensions
of the substance being measured. Conductivity and resistivity are For example: 100μS/cm conductivity is a TDS of 50ppm when the
“normalized” terms that are used to denote a bulk intrinsic property factor is 0.5.
of a substance. This is the measurement a standardized EC probe on a
conductivity or resistivity meter provides. Conductivity measurements
Conductivity/Resistivity/TDS of Commonly
can be used to provide additional industry specific measurements;
TDS, Salinity and USP compliant conductivity. Many of Hanna’s meters
Measured Substances
provide these measurements also.
Sample at 25°C MΩ•cm µS/cm mS/cm TDS
Ultrapure Water 18.16 .055
Units of Measurement
Power Plant
1.0 1.0 0.5 ppm
Electrical Resistivity ρ (Greek rho), also called Specific Resistance (1cm Boiler Water
cube) uses units of Ohm.cm. For example, ultrapure water is said to Drinking Water 500-800 0.5 to 0.8 250 to 400 ppm
have a value of 18.16 Mohm.cm.at 25°C. Ocean Water 53000 53.0 9.24 g/L
Note: Prior to 1971 mho/cm was the unit used for conductivity. This
unit can still be found in some older literature. Salinity
Conductivity measurements can be used for determining salinity as it
Conductivity versus Resistivity relates to general oceanographic
Although conductivity and resistivity are reciprocal units that
may be converted easily, convention uses resistivity for very low use. Three measurement scales are in use and depending on the
electrolyte concentrations or trace contaminants i.e. ultrapure sophistication of the meter, are available for salinity measurement in
water, and conductivity for expressing meaningful salt levels i.e. Seawater. The 3 scales are Practical Salinity Scale (PSU); 1978, Percent
seawater; electroplating baths, acid concentrations. Electrode style Scale (%);and Natural Seawater Scale(g/L); 1966.
and measurement techniques also contribute to success in making
conductivity or resistivity measurements reliably. Conductivity Practical salinity and the Natural Seawater require a conductivity
measurements can be used to provide useful industry specific calibration. The meters have the algorithms to convert the
measurements such as TDS, Salinity and USP compliant conductivity measurement to the desired scale. NaCl % requires a calibration in
and many of Hanna’s conductivity meters provide the computing HI70371 standard. Portable meters with this measurement make it
power to provide these measurements automatically. easy to measure salinity in salt water aquariums and brackish waters.
5.2 | www.hannainst.com
Conductivity/TDS Meters Introduction 5
Conductivity and Temperature prompts to guide the technician. Water that does not pass at Stage 2
Conductivity 0.01m must be tested for pH.
Conductivity changes with ion concentration KCl
and with temperature. For example, a standard °C uS/cm Using Hanna conductivity will help to meet the goals of the USP Purified
potassium chloride solution used for calibration 21 1305 Water and WFI requirements that include improved water quality, improved
of a cell constant and conductivity bridge, 22 1332 equipment reliability and reduction in the number of required tests.
changes conductivity as tabulated at right. 23 1359
24 1386
Conductivity Calibration
Conductivity / TDS
Having two variables changing would make 25 1413
26 1441
it near impossible to take useful conductivity Conductivity standards are salt solutions for which the conductivity
27 1468
measurements. If the temperature was held and temperature dependence are known. A well-defined relationship
28 1496
constant, the conductivity measurement between Potassium Chloride concentration and electrolytic conductivity
would only have the variable of ion exists so KCl solutions are typically used as standards. A standard is used
concentration. Absolute conductivity is a conductivity measurement to determine the cell constant, in theory a defined geometric constant
without temperature compensation. If the conductivity change volume. Standards of 84 μS/cm, 1413 μS/cm, 5.00 mS/cm, or 12.88 mS/cm,
with temperature change of a solution is a known characteristic, 80 mS/cm and 111.8 mS/cm are manufactured by Hanna. Calibration is
the Conductivity measurements can be corrected to a reference conducted with a value close to the samples conductivity. If the exact
temperature (typically 20 or 25°C) by carefully measuring the solution cell constant is known, some meters permit the manual input of the
temperature. Fortunately, Hanna EC sensors incorporate an integral factor. This ensures maximum flexibility and measurement accuracy.
temperature sensor to measure solution temperature. Compensation Our research grade bench meters allow several points values to be
corrects the measured conductivity to a reference temperature by calibrated for improved accuracy over a wider measurement range.
applying a fixed factor β for linear compensation. High end meters
allow adjustment of β to compensate for various solutions and Types of Conductivity
permit adjustment of a reference temperature over a wider range of
Three types of conductivity probes are manufactured by Hanna, The
temperatures. β for neutral salts is typically between 1.5 to 2.2%/°C.
simplest design is a 2-Electrode Probe that utilizes an amperometric
approach to make the measurement; a known AC voltage is applied at a
EC x
EC₂₅= specific frequency between a pair of electrodes in solution. The current
(1+ β₂₅ (Tx —25))
produced is measured and reported in conductivity units referenced
to a calibrated standard. Electrodes are made of graphite or metal.
Fouling due mineral deposits and polarization at high concentration are
Typical Temperature Coefficients of
drawbacks of this technology. Two electrodes probes are best used in
Various Solutions clean water applications when conductivities remain less than 5 mS/cm.
Sample Percent / °C Sample Percent / °C
introduction
Four electrode conductivity (four-ring conductivity) utilizes a
Ultrapure Water 4.55 10% HCl 1.32
potentionmetric approach to make the measurement; an alternating
NaCl 2.12 5% H₂SO₄ 0.96
current is applied to the outer two “drive”electrodes to induce a current
5% NaOH 1.72 98% H₂SO₄ 2.84 in the solution. The voltage is measured between the inner pair of
electrodes in solution. The voltage is proportional the conductivity
This technology extends the linear range of measurement over three
Non- linear temperature compensation for Natural waters is found
decades. Electrodes are made of graphite, stainless steel or Platinum.
some high end bench meters.
Polarization effects are reduced.
(USP) United States Pharmacopeia Compliant Both two and four electrode probes may incorporate a outer sleeve
Conductivity over the cell channel. The sleeve must stay in place during the
measurement as this defines the volume of solution measured and the
Conductivity measurements are used for the preparation of cell factor of the probe.
pharmaceutical water for injection (WFI) worldwide. Hanna EC probes
and meters can permit you to meet USP<645> Water Conductivity The third type of conductivity probe manufactured by Hanna is often
Requirements and European Pharmacopoeia 2.2.38 Conductivity found in industrial processes connected to a controller. An Inductive,
Test for USP & EP Purified Water and Water for Injection. USP<645> Electrodeless or Toroidal conductivity probe uses two or more toroidal
with three stage compliance uses conductivity as a basis of ionic transformers which are inductively coupled side by side and encased
contaminants. Factors such as accuracy, resolution, cell constant in an inert plastic sheath. By applying a high frequency voltage to the
certainty and ability to measure absolute conductivity are required. drive toroid, a magnetic field develops that induces a current in the
Stage 1 uses in-line conductivity measurements for compliance and surrounding solution. A receiver toroid on the other side of the sensor
a temperature/conductivity limit for compliance. Water that does not measures the strength of the induced current. The strength depends
pass the Stage 1 limits must then be tested to Stage 2 requirements. on the conductivity of the solution. The benefits of this technology are
This is a laboratory based technique that is streamlined using our no polarization effects, choice of material encapsulation can produce
meters with USP application firmware. They offer programmable set chemical resistant and relative immunity to fouling, and solutions are
points to exceed the minimum meet USP and EP requirements and not needed for calibration.
www.hannainst.com | 5.3
5 Product Spotlights
edge®EC
edge EC is thin and lightweight, measuring just 1⁄2” thick and weighing
less than 9 ounces. edge EC has an incredibly wide viewing angle, 5.5”
LCD and a sensitive capacitive touch keypad.
HI5321
HI98192
This new meter features a 50% smaller body and is 33% lighter
than previous models.
5.4 | www.hannainst.com
edge®
HI5321
HI2315
HI8733
HI9033
HI8033
HI9835
HI8633
HI2300
HI8734
edge EC
HI87314
HI98197
HI99301
HI98192
HI99300
HI993310
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
EC Range EC Range
•*
pH Range pH Range
Portable Meters
•
•
•
Resistivity Range ISE Range
Benchtop Meters
•*
ORP Range DO Range
•
•
•
•
•
•
•
TDS Range Resistivity Range
•
•
•
Salinity Range ORP Range
•
•
•
°C
°C
Temperature Range(s) TDS Range
°C/°F
°C/°F
°C/°F
•
•
•
1
1
1
1
1
1
1
1
1
5
5
EC Calibration Points Salinity Range
1
1
7
7
6
°C
°C /°F K
1
1
•
•
•
•
•
•
•
•
•
•
4
EC Calibration Points
Compensation)
†
•
•
•
•
•
•
•
6
6
6
•
•
•
•
Logging
Compensation)
•
•
•
•
•
•
GLP Logging
•
•
•
•
•
•
HOLD Feature GLP
•
•
•
•
•
PC Connectivity Capacitive Touch Buttons
†
•
•
•
•
AutoRanging Auto End Feature
•
•
•
•
•
•
•
AutoEnd PC Connectivity
www.hannainst.com |
•
•
•
•
•
•
•
•
•
•
•
•
Waterproof AutoRanging
Benchtop, Portable
•
•
•
Flow Cell for WFI Applications
& Wall-Mount
Page Page
5.6
5.31
5.14
5.10
5.16
5.19
5.18
5.33
5.32
5.27
5.27
5.22
5.30
5.30
5.29
5.26
5.28
Comparison Guides
5.5
comparison guides Conductivity / TDS
5
pH • EC • DO
Conductivity / TDS
edge
5.6 | www.hannainst.com
edge® technical edge design features
features
5
Rechargeable Battery
edge has a built in rechargeable battery that
is charged when the meter is in the plugged
in benchtop or wall mount cradle. The battery
can also be recharged through the micro USB
port with either a USB port from a computer or
GLP
directly to the power supply. Data of the last calibration you perform
is stored in the sensor including the date,
Conductivity / TDS
time, and buffers used. When the sensor is
connected to edge, GLP data is automatically
Capacitive touch keypad
transferred. edge features sensitive capacitive touch
buttons for accurate keystrokes when
Two Operating Modes
navigating edge’s menus and screens. Since
edge can be used in Extended or Basic
they are part of the screen, the buttons can
Operating Modes. Extended Mode enables
never get clogged with sample residue.
all edge features while Basic Mode reduces
Two USB ports features—ideal for routine measurements by
displaying a simplified screen and features.
edge includes one standard USB for exporting
data to a flash drive. edge also includes one
edge pH Features*
micro USB port for exporting files to your
computer as well as for charging when the 5.5"
cradle is not available.
edge
edge features clear, full text guides displayed
pH buffers during the calibration process to
on the bottom of the screen. There is no
alert the user of potential problems such as a
need to decipher scrambled abbreviations or
contaminated buffer or dirty electrode. After
symbols; these helpful messages guide you
calibration, indicators for probe condition are
through every process quickly and easily.
displayed on the measurement screen. The
probe condition is based on offset and slope
characteristics of the pH electrode.
records of data. Data sets include readings, edge measures ORP with edge compatible built-in connector to power and charge the
GLP data, date and time. ORP probes. batteries.
* Using edge compatible pH electrodes
www.hannainst.com | 5.7
5
Conductivity / TDS
5.8 | www.hannainst.com
• Digital four-ring conductivity probe ·· Data of the last performed calibration
5
·· Covers all ranges from 0.00 μS/ is stored in the probe: date, time, cell
cm to 500 mS/cm (absolute EC) constant, temperature coefficient,
reference temperature and
• Accuracy
battery status. When the probe is
·· ± 1% of the reading (±0.05 μS/cm
connected to edge®EC , GLP data
or 1 digit, whichever is greater)
is automatically transferred
• Calibration
• Adjustable EC to TDS conversion factor
·· Offset (0 µS/cm) and cell
factor calibration • Adjustable temperature
·· Choice of five standards correction coefficient
(auto-recognition)
• Seawater salinity units
• Data logging ·· % NaCl
·· Manual log-on-demand ·· PSU
Conductivity / TDS
Digital electrodes ·· Manual log-on-stability ·· g/L
·· Interval logging
edge® measures pH, conductivity and
• Auto-ranging or manual range selection
dissolved oxygen through its unique digital
electrodes. These digital electrodes are auto- • EC, TDS and salinity reading modes
recognized, providing sensor type, calibration
• Temperature compensation
data and a serial number when connected to
·· Automatic
edge by an easy to plug-in 3.5mm connector.
·· NoTC (absolute) Sleek design
• Simply connect each probe via the • GLP data Incredibly thin and lightweight, edge
3.5 mm jack, Digital Smart Electrodes ·· Records date, time, offset measures just 1/2” (12 mm) thick and
are automatically recognized and cell factor weighs just 8.8 ounces (250 g).
edge
up to 400.0 g/L absolute TDS using 0.80 conversion factor**
Resolution 0.01 mg/L (ppm); 0.1 mg/L (ppm); 1 (ppm); 0.01 g/L; 0.1 g/L
TDS
Accuracy (@25°C/77°F) ±1% of reading (±0.03 ppm or 1 digit, whichever is greater)
Calibration through EC calibration
TDS Factor 0.40 to 0.80 (default value is 0.50)
Range 0.0 to 400.0 % NaCl; 2.00 to 42.00 PSU; 0.0 to 80.0 g/L
Resolution 0.1 % NaCl; 0.01 PSU; 0.01 g/L
Salinity†
Accuracy (@25°C/77°F) ±1% of reading
Calibration PSU and g/L through EC calibration; % NaCl — one-point with HI7037 sea water standard
Range* -20.0 to 120.0°C; -4.0 to 248.0°F
Temperature Resolution 0.1°C; 0.1°F
Accuracy ±0.5°C; ±0.9°F
Probe (included in EC kit) HI763100 digital four-ring conductivity probe with 3.5 mm (1/8”) connector and 1 m (3.3’) cable
up to 1000† (400 for basic mode) records organized in: manual log-on-demand (max. 200 logs),
Logging
manual log-on-stability (max. 200 logs), interval logging† (max. 600 samples; 100 lots)
Additional
Connectivity 1 USB port for storage; 1 micro USB port for charging and PC connectivity
Specifications
Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing
Power Supply 5 VDC adapter (included)
Dimensions / Weight 202 x 140 x 12 mm (7.9” x 5.5” x 0.5”) / 250 g (8.82 oz.)
HI2030-01 (115V) and HI2030-02 (230V) EC kit also includes: HI763100 Conductivity probe, 1413 μS/cm conductivity standard sachets (4),
Ordering 12880 μS/cm conductivity standard sachets (2), 5000 µS/cm conductivity standard sachets (2), and electrode rinse solution sachets (2).
Information
All edge compatible pH, EC and DO digital probes are interchangeable with HI2030 and can be ordered separately.
* temperature limits will be reduced to actual probe limits ** with temperature compensation function disabled
† standard mode only
EC, TDS and Salinity solutions begin on page 5.34 www.hannainst.com | 5.9
5 EC
Conductivity / TDS
EC
edge®EC
edge
5.10 | www.hannainst.com
edge®EC technical
features 5
Rechargeable Battery
edge EC has a built in rechargeable battery
that is charged when the meter is in the
plugged in benchtop or wall mount cradle. The
battery can also be recharged through the
micro USB port with either a USB port from a GLP
computer or directly to the power supply. Data of the last calibration you perform
is stored in the sensor including the date,
Conductivity / TDS
time, and buffers used. When the sensor
is connected to edge EC, GLP data is
automatically transferred. Zero footprint
Using the wall mount cradle (included),
Two Operating Modes edge EC can be placed on a wall, leaving zero
edge EC can be used in Extended or Basic footprint on the benchtop space. The cradle
Operating Modes. Extended Mode enables has a built-in connector to power and charge
all edge features while Basic Mode reduces the batteries.
Two USB ports features—ideal for routine measurements by
edge EC includes one standard USB for displaying a simplified screen and features.
exporting data to a flash drive. edge EC also
includes one micro USB port for exporting
files to your computer as well as for charging edge EC design
when the cradle is not available.
features
edge
edge®EC
edge features clear, full text guides displayed
on the bottom of the screen. There is no Capacitive touch keypad
need to decipher scrambled abbreviations or edge EC features sensitive capacitive touch
EC
symbols; these helpful messages guide you buttons for accurate keystrokes when
through every process quickly and easily. navigating edge’s menus and screens. Since
they are part of the screen, the buttons can
never get clogged with sample residue. Sleek design
Incredibly thin and lightweight, edge
measures just 1/2” (12 mm) thick and weighs
just 8.8 ounces (250 g).
5.5"
www.hannainst.com | 5.11
5
Conductivity / TDS
5.12 | www.hannainst.com
5
Digital electrodes
edge®EC performs measurements through
its unique digital electrodes. These digital
electrodes are auto-recognized, providing
sensor type, calibration data and a serial
number when connected to edge EC by an
easy to plug-in 3.5 mm connector.
Conductivity / TDS
Conductivity probe
HI763100 (included)
Conductivity probe with temperature sensor
Recommended for general purpose
Resolution 0.01 µS/cm; 0.1 µS/cm; 1 µS/cm; 0.01 mS/cm; 0.1 mS/cm
Accuracy
EC ±1% of reading (±0.05 µS/cm or 1 digit, whichever is greater)
(@25°C/77°F)
single cell factor calibration; six standards available: 84 µS/cm, 1413 µS/cm, 5.00 mS/cm, 12.88 mS/cm,
Calibration
80.0 mS/cm, 111.8 mS/cm, one point offset: 0.00 µS/cm
Temperature Coefficient 0.00 to 6.00%/°C (for EC and TDS only), default value is 1.90%/°C
0.00 to 14.99 mg/L (ppm); 15.0 to 149.9 mg/L (ppm); 150 to 1499 mg/L (ppm); 1.50 to 14.99 g/L; 15.0 to 100.0 g/L;
Range
up to 400.0 g/L absolute TDS using 0.80 conversion factor**
Resolution 0.01 mg/L (ppm); 0.1 mg/L (ppm); 1 (ppm); 0.01 g/L; 0.1 g/L
TDS Accuracy
±1% of reading (±0.03 ppm or 1 digit, whichever is greater)
(@25°C/77°F)
edge
edge®EC
Calibration through EC calibration
Range 0.0 to 400.0 % NaCl; 2.00 to 42.00 PSU; 0.0 to 80.0 g/L
EC
Resolution 0.1 % NaCl; 0.01 PSU; 0.01 g/L
Salinity† Accuracy
±1% of reading
(@25°C/77°F)
Calibration PSU and g/L through EC calibration; % NaCl — one-point with HI7037 sea water standard
Probe HI763100 digital four-ring conductivity probe with 3.5 mm (1/8”) connector and 1 m (3.3’) cable
up to 1000† (400 for basic mode) records organized in: manual log-on-demand (max. 200 logs),
Logging
manual log-on-stability (max. 200 logs), interval logging† (max. 600 samples; 100 lots)
Connectivity 1 USB port for storage; 1 micro USB port for charging and PC connectivity
Additional
Specifications Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing
HI2003-01 (115V) and HI2003-02 (230V) edge EC includes: HI763100 Conductivity probe, 1413 μS/cm conductivity standard sachets (4),
Ordering
12880 μS/cm conductivity standard sachets (2), 5000 µS/cm conductivity standard sachets (2), electrode rinse solution sachets (2), benchtop
Information docking station with electrode holder, wall-mount cradle, USB cable, 5 VDC power adapter, quality certificates and instruction manual.
EC, TDS and Salinity solutions begin on page 5.34 www.hannainst.com | 5.13
HI5321
5 Research Grade
Conductivity/TDS
Meter
EC/TDS/Resistivity/Salinity and
Temperature with USP <645>
Conductivity / TDS
5.14 | www.hannainst.com
USP <645>
For the measurement of high purity water used in pharmaceutical manufacturing, the HI5321 is programmed with the first two
stages of the USP <645> method. Once a stage is met a report is generated and can be saved. Up to 200 reports can be stored and
5
transferred to a Windows® compatible computer using a USB cable and software (sold separately).
Conductivity / TDS
Specifications HI5321
0.000 to 9.999 µS/cm; 10.00 to 99.99 µS/cm; 100.0 to 999.9 µS/cm; 1.000 to 9.999 mS/cm;
Range
10.00 to 99.99 mS/cm; 100.0 to 1000.0 mS/cm actual EC*
Resolution 0.001 µS/cm; 0.01 µS/cm; 0.1 µS/cm; 0.001 mS/cm; 0.01 mS/cm; 0.1 mS/cm
Accuracy ±1% of reading (±0.01 µS/cm)
Cell Constant 0.0500 to 200.00/cm
Cell Type 4 cells
Calibration automatic standard recognition, user standard, single point / multi-point calibration
EC
EC Calibration Solution 84.00 μS/cm, 1.413 mS/cm, 5.000 mS/cm, 12.88 mS/cm, 80.00 mS/cm, 111.8 mS/cm
Calibration Reminder yes
Temperature Coefficient 0.00 to 10.00 %/°C
Temperature Compensation disabled, linear and non-linear (natural water)
Reference Temperature 5.0 to 30.0°C
Profiles up to 10
USP Compliant yes
0.000 to 9.999 ppm; 10.00 to 99.99 ppm; 100.0 to 999.9 ppm; 1.000 to 9.999 ppt; 10.00 to 99.99 ppt;
Range
100.0 to 400.0 ppt actual TDS* (with 1.00 factor)
TDS
Resolution 0.001 ppm; 0.01 ppm; 0.1 ppm; 0.001 ppt; 0.01 ppt; 0.1 ppt
benchtop
Accuracy ±1% of reading (±0.01 ppm)
1.0 to 99.9 Ω•cm; 100 to 999 Ω•cm; 1.00 to 9.99 kΩ•cm; 10.0 to 99.9 kΩ•cm; 100 to 999 kΩ•cm;
Range
1.00 to 9.99 MΩ•cm; 10.0 to 100.0 MΩ•cm
Resistivity
Resolution 0.1 Ω•cm; 1 Ω•cm; 0.01 kΩ•cm; 0.1 kΩ•cm; 1 kΩ•cm; 0.01 MΩ•cm; 0.1 MΩ•cm
Accuracy ±2% of reading (±1 Ω•cm)
Range practical scale: 0.00 to 42.00 psu; natural sea water scale: 0.00 to 80.00 ppt; percent scale: 0.0 to 400.0%
Resolution 0.01 for practical scale/natural sea water scale; 0.1% for percent scale
Salinity
Accuracy ±1% of reading
Calibration percent scale—one-point (with HI7037 standard); all others through EC
Range -20.0 to 120°C; -4.0 to 248.0°F; 253.15 to 393.15K
Temperature** Resolution 0.1°C; 0.1°F; 0.1K
Accuracy ±0.2°C ; ±0.4°F; ±0.2K (without probe)
EC Probe HI76312 platinum, four-ring EC/TDS probe with and 1 m (3.3’) cable (included)
GLP cell constant, reference temperature/coefficient, calibration points, cal time stamp, probe offset for conductivity
record : Up to 100 lots, 50,000 records max/lot / maximum 100,000 data points; interval: 14 selectable between
Logging
Additional 1 second and 180 minutes; type: Automatic, Log on demand, AutoHold; additional: 200 records USP
Specifications
PC Connection USB
Power Supply 12 VDC adapter (included)
Environment 0 to 50°C (32 to 122°F; 273 to 323K) RH max 95% non-condensing
Dimensions / Weight 160 x 231 x 94 mm (6.3 x 9.1 x 3.7”) / 1.2 kg (2.64 lbs.)
HI5321-01 (115V) and HI5321-02 (230V) are supplied with HI76312 EC/TDS probe, 1413 µS/cm conductivity standard sachet (4), 12880 µS/cm
Ordering
conductivity standard sachet (2), 5000 µS/cm conductivity standard sachet (2), electrode rinse solution sachet (2), HI76404W electrode holder,
Information 12 VDC adapter, capillary dropper pipette, quality certificate, quick start guide and instruction manual.
EC, TDS and Salinity solutions begin on page 5.34 www.hannainst.com | 5.15
HI2300
GLP Data
Calibration
The calibration data including date, time,
EC and TDS are calibrated at one point with standards used, offset and cell constant
a choice of six pre-programmed standards. can be accessed at any time along with the
Salinity is calibrated at one point using the current measurement by selecting the Good
HI7037 100% NaCl standard solution. Laboratory Practice (GLP) display option.
5.16 | www.hannainst.com
On-screen Features
5
Conductivity / TDS
Cell constant value (K) Offset value
Specifications HI2300
0.00 to 29.99 µS/cm; 30.0 to 299.9 µS/cm; 300 to 2999 µS/cm; 3.00 to 29.99 mS/cm; 30.0 to 200.0 mS/cm;
Range
up to 500.0 mS/cm (actual EC)*
EC
Resolution 0.01 µS/cm; 0.1 µS/cm; 1 µS/cm; 0.01 mS/cm; 0.1 mS/cm
0.00 to 14.99 mg/L (ppm); 15.0 to 149.9 mg/L (ppm); 150 to 1499 mg/L (ppm); 1.50 to 14.99 g/L (ppt);
Range
15.0 to 100.0 g/L (ppt); up to 400.0 g/L (actual TDS)*, with 0.80 conversion factor
TDS
Resolution 0.01 mg/L; 0.1 mg/L; 1 mg/L; 0.01 g/L; 0.1 g/L
benchtop
Accuracy ±1% of reading
Accuracy ±0.4°C
EC Calibration automatic, one point with six memorized values (84, 1413, 5000, 12880, 80000, 111800 µS/cm)
Temperature Coefficient selectable from 0.00 to 6.00%/°C (EC and TDS only)
TDS Conversion Factor selectable from 0.40 to 0.80 (default value: 0.50)
HI76310 platinum, four ring conductivity/TDS probe with internal temperature sensor
Additional Probe
and 1 m (3.3’) cable (included)
Specifications
PC Connectivity opto-isolated USB
Ordering
HI2300-01 (115V) and HI2300-02 (230V) is supplied with HI76310 conductivity probe, 12 VDC adapter and instructions.
Information
EC, TDS and Salinity solutions begin on page 5.34 www.hannainst.com | 5.17
HI2315
5 Conductivity Meter
Conductivity / TDS
The HI2315 is a basic and affordable conductivity benchtop Built-in Solution Holders
meter that comes with a four-ring potentiometric EC probe with a
built-in temperature sensor. Operation of the meter is simplified to The HI2315 benchtop meter features four solution holders built
calibration, range selection, and adjustment of the temperature directly into the casing. This convenient feature saves valuable
compensation coefficient. benchtop space and maintains solution bottles in an upright position,
avoiding any potential spills.
EC calibration is made simple through the easy-to-operate front panel
benchtop
knobs for adjustment. A front knob is also provided to manually set the
temperature compensation coefficient of EC from 0 to 2.5 %/°C.
Specifications HI2315
Simple User Interface
0.0 to 199.9 µS/cm; 0 to 1999 µS/cm;
Operation is simple with limited features that only require the use of a Range
0.00 to 19.99 mS/cm; 0.0 to 199.9 mS/cm
couple of buttons. Readings are easy to view on the large, clear display.
EC Resolution 0.1 µS/cm; 1 µS/cm; 0.01 mS/cm; 0.1 mS/cm
Calibration Accuracy
(@25°C/77°F)
±1% F.S. (excluding probe error)
Manual EC calibration can be performed at 1 point. A large front Calibration manual, one point
panel knob allows for simple, user-friendly calibration of the HI2315
Temperature automatic, 0 to 50°C (32 to 122°F) with β
benchtop meter. Compensation adjustable coefficient from 0 to 2.5%/°C
range from 0.00 μS/cm to 199.9 mS/cm with a full-scale accuracy 0 to 50°C (32 to 122°F);
Environment
of ±1%. RH max 95% non-condensing
Temperature is automatically compensated for from 0 to 50°C. The HI2315-01 (115V) and HI2315-02 (230V) are supplied
Ordering
temperature correction coefficient, also referred to as β, is adjustable with HI76303 conductivity probe, 12 VDC adapter and
Information instruction manual.
from 0 to 2.5 %/°C for EC measurements.
Professional 5
Waterproof Meters
EC/TDS/Resistivity/Salinity Meter with
USP <645>
• Waterproof
·· IP67 rated waterproof,
rugged enclosure
• Salinity readings
·· Salinity can be displayed as %
Conductivity / TDS
NaCl, seawater scale (ppt) or
practical salinity scale (PSU)
• Calibration
·· Perform up to a five point calibration
for enhanced accuracy
• Temperature compensation
·· Automatic Temperature Compensation
·· Configurable temperature coefficient
range from 0.00 to 10.00%.°C
• Four-ring stainless steel probe
·· This probe can cover low EC samples
to 1000 mS/cm (actual EC)
• Approximately 100 hour battery life
·· Powered by (4) 1.5V AA batteries
• Clear display
·· Dot matrix display with
multifunction virtual keys
• AutoHold
·· Automatically holds the first
stable reading on the display
• Calibration timeout
·· Alerts when calibration is due
at a specified interval
• Connectivity
portable
·· PC connectivity via opto-isolated
micro-USB with HI92000 software
• GLP
·· GLP data provides data from
previous calibration to ensure Good
Laboratory Practices are met
• Intuitive keypad
·· Most of the available options
such as GLP information, help,
range, calibration and backlight
have a dedicated button
• Supplied complete
·· Each meter is supplied complete
with sensor, calibration solution,
beakers, PC software and connection
For Universal Applications cable, instruction manual, quick
start guide and batteries in a
HI98192 is a waterproof, portable conductivity meter that has an expanded conductivity
rugged, custom carrying case.
range from 0.000 µS/cm to 400 mS/cm, as well as TDS, resistivity and three salinity scales.
This meter offers a quick connect four-ring probe and allows the user to adjust the nominal cell
constant. HI98192 is also ready to perform all three stages of USP <645> method required for
EC measurement of ultrapure water.
www.hannainst.com | 5.19
USP <645> from 0.00 to 10.00%/°C, choice of reference
5
temperatures of 15°C, 20°C and 25°C, and a
HI98192 can be used to perform all three selectable TDS factor between 0.40 and 1.00.
stages of USP method required for EC
measurement of ultrapure water and Ten sets of customized measurement
generates a report when the any of the three parameters can be stored as a user profile
stages are met. and later recalled.
Waterproof Protection
• Three stages of conformity
The meter is enclosed in an IP67 rated
Data Logging
·· Performs all 3 stages of USP <645>
waterproof casing and can withstand water quality testing requirements The HI98192’s allows storage of up to 400
immersion in water at a depth of 1 m for up to log-on-demand samples or 1000 lot logging
30 minutes. samples that can be later transferred to a PC
with the supplied HI920015 USB cable and
HI92000 software.
• On-screen guide
·· Users are provided with on-screen
instructions for each USP stage
GLP
Comprehensive GLP functions are directly
accessible by pressing the GLP key. Calibration
data, including date, time and calibration
values are stored for retrieval at a later time
portable
Intuitive Keypad
Quick connect probe The fitted rubber keypad has dedicated keys
• Progress bar for power, backlight, up/down arrows, help
The HI763133 four-ring stainless steel ·· Displays reading stability progress and alphanumeric characters. The meter also
conductivity probe features a quick connect towards meeting stage 2 requirements features two virtual soft keys that navigate
DIN connector to make attaching and the user through the configuration of each
removing the probe simple and easy. parameter, meter setup, and logging of data.
The interface is intuitive for any user’s level
of experience.
Measurement
EC and TDS measurements are fully
Calibration customizable and include: cell constant
Choose from seven memorized standards selection between 0.010 and 10.000,
and obtain up to a five point conductivity selection of linear or natural water (non-
AutoHold
calibration. For salinity (% range), HI7037 linear) or no temperature compensation (for Pressing AutoHold during measurement will
standard allows users to perform a one point actual conductivity reading), configurable automatically hold the first stable reading on
calibration. temperature compensation coefficient range the display.
5.20 | www.hannainst.com
Dedicated Help Key
Contextual help is always available through a 5
dedicated “HELP” key. Clear tutorial messages
and directions are available on-screen to
quickly and easily guide users through
setup and calibration. The help information
displayed is relative to the setting/option
being viewed.
Conductivity / TDS
PC Connectivity
Logged data can be transferred to a Windows
compatible PC with the included HI920015
micro USB cable and HI92000 software. Rugged custom carrying case
The HI98192 meter, probe, and all accessories
Setup screen Long Battery Life are supplied in the HI720192 rugged carrying
Our extensive setup screen features a host The display of the meter has a battery icon case designed to provide years of use. The
of configurable options such as time, date, indicator to show the remaining power. inside compartment of the carrying case is
temperature units and language for help The meter uses four 1.5V AA batteries that thermoformed to securely hold and protect
screens and guides provide up to 100 hours of battery life. all of the components.
Specifications HI98192
0 to 400 mS/cm (shows values up to 1000 mS/cm actual conductivity)** 0.001 to 9.999 µS/cm*; 10.00 to 99.99 µS/cm;
Range
100.0 to 999.9 µS/cm; 1.000 to 9.999 mS/cm; 10.00 to 99.99 mS/cm; 100.0 to 1000.0 mS/cm (autoranging)
Resolution 0.001 µS/cm*; 0.01 µS/cm; 0.1 µS/cm; 0.001 mS/cm; 0.01 mS/cm; 0.1 mS/cm
EC
Accuracy ±1% of reading (±0.01 µS/cm or 1 digit, whichever is greater)
automatic up to five points with seven memorized standards (0.00 µS/cm, 84.0 µS/cm, 1.413 mS/cm, 5.00 mS/cm,
Calibration
12.88 mS/cm, 80.0 mS/cm, 111.8 mS/cm)
Range 0.00 to 99.99 ppm; 100.0 to 999.9 ppm; 1.000 to 9.999 g/L; 10.00 to 99.99 g/L; 100.0 to 400.0 g/L (autoranging)
TDS Resolution 0.01 ppm; 0.1 ppm; 0.001 g/L; 0.01 g/L; 0.1 g/L
Accuracy ±1% of reading (±0.05 ppm or 1 digit, whichever is greater)
1.0 to 99.9 Ω•cm; 100 to 999 Ω•cm; 1.00 to 9.99 KΩ•cm; 10.0 to 99.9 KΩ•cm; 100 to 999 KΩ•cm; 1.00 to 9.99 MΩ•cm;
Range
10.0 to 100.0 MΩ•cm* (autoranging)
Resistivity
Resolution 0.1 Ω•cm; 1 Ω•cm; 0.01 KΩ•cm; 0.1 KΩ•cm; 1 KΩ•cm; 0.01 MΩ•cm; 0.1 MΩ•cm*
Accuracy ±1% of reading (±10 Ω or 1 digit, whichever is greater)
portable
Range % NaCl : 0.0 to 400.0%; practical salinity: 0.00 to 42.00 (PSU); seawater scale: 0.00 to 80.00 (ppt)
Resolution 0.1%; 0.01
Salinity
Accuracy ±1% of reading
Calibration max. one point only in % NaCl range with HI7037 standard; use conductivity calibration for all other ranges
Range -20.0 to 120.0°C; -4.0 to 248.0°F
† Resolution 0.1°C; 0.1°F
Temperature
Accuracy ±0.2°C; ±0.4°F (excluding probe error)
Calibration one or two points
Cell Constant Setup 0.010 to 10.000
Temperature
NoTC, linear (-20.0 to 120.0°C (-4.0 to 248.0°F)), non linear (0 to 36°C (32 to 98.6°F)) ISO/DIS 7888 std
Compensation
Reference Temperature 15°C, 20°C and 25°C
Temperature Coefficient 0.00 to 10.00 %/°C
TDS Factor 0.40 to 1.00
Probe HI763133 stainless steel, four-ring conductivity/TDS probe with internal temperature sensor and 1.5 m (4.9’) cable (included)
Additional
Logging log-on-demand: 400 samples; lot logging: 5, 10, 30 sec, 1, 2, 5, 10, 15, 30, 60, 120, 180 min (max 1000 samples)
Specifications
Memorized Profiles up to 10
Measurement Modes autorange, autoend, lock and fixed range
PC Connectivity opto-isolated sealed USB (with HI92000 software and micro USB cable)
Battery Type / Life 1.5V AA batteries (4) / approximately 100 hours of continuous use (without backlight), 25 hours with backlight;
Auto-off user selectable: 5, 10, 30, 60 min, disabled
Environment 0 to 50°C (32 to 122°F); RH 100% IP67
Dimensions/Weight 185 x 93 x 35.2 mm (7.3 x 3.6 x 1.4”) / 400 g (14.2 oz.)
HI98192 is supplied with HI763133 stainless steel, four-ring conductivity/TDS probe, HI7031M 1413 µS/cm calibration solution (230 mL),
Ordering
HI7035M 111.8 mS/cm calibration solution (230 mL), 100 mL plastic beaker (2), HI92000 PC software, HI920015 micro USB cable, 1.5V AA batteries (4),
Information quick start guide, quality certificate and instruction manual in an HI720192 rugged carrying case with custom insert.
* The 0.000 µS/cm EC range and 0.1 MΩ•cm resistivity range are not available with the optional 4m cable probe
**Uncompensated temperature reading
(†) Reduced to actual sensor limits
EC, TDS and Salinity solutions begin on page 5.34 www.hannainst.com | 5.21
HI98197
5 Professional
Waterproof Meter
for Ultrapure Water
• Waterproof
·· IP67 rated waterproof,
rugged enclosure
• Conductivity and resistivity
·· High resolution of 0.001 μS/cm
for conductivity and 0.1 MΩ•cm
Conductivity / TDS
for resistivity
• Calibration
·· Perform up to a five point calibration
for enhanced accuracy
• Temperature compensation
·· Automatic Temperature Compensation
·· Configurable temperature coefficient
range from 0.00 to 10.00%/°C
• Four-ring platinum probe
·· This probe can cover low EC samples
to 1000 mS/cm (actual EC)
• Approximately 100 hour battery life
·· Powered by (4) 1.5V AA batteries
• Clear display
·· Graphic LCD display with
multifunction virtual keys
• AutoHold
·· Automatically holds the first
stable reading on the display
• Enhanced calibration
·· An “out of calibration range” warning
blinks if the measurement range is not
covered by the current calibration
• Calibration timeout
portable
5.22 | www.hannainst.com
USP <645>
HI98197 can be used to perform all three
stages of USP <645> method required for
5
EC measurement of water for injection and
generates a report when the any of the three
stages are met.
Conductivity / TDS
for an intuitive user interface. data, including date, time and calibration
values are stored for retrieval at a later time
Waterproof Protection
• Three stages of conformity
The meter is enclosed in an IP67 rated
Intuitive Keypad
·· Performs all 3 stages of USP <645>
waterproof casing and can withstand water quality testing requirements The fitted rubber keypad has dedicated keys
immersion in water at a depth of 1 m for up to for power, backlight, up/down arrows, help
30 minutes. and alphanumeric characters. The meter also
features two virtual soft keys that navigate
the user through the configuration of each
parameter, meter setup, and logging of data.
The interface is intuitive for any user’s level
of experience.
AutoHold
• On-screen guide Pressing AutoHold during measurement will
·· Users are provided with on-screen automatically hold the first stable reading on
instructions for each USP stage the display.
portable
setup and calibration. The help information
displayed is relative to the setting/option
Calibration
being viewed.
Choose from seven memorized standards and • Progress bar
obtain up to a five point conductivity calibration. ·· Displays reading stability progress Setup screen
For salinity (% range), HI7037 standard allows towards meeting stage 2 requirements
users to perform a one point calibration. Our extensive setup screen features a host
of configurable options such as time, date,
Measurement temperature units and language for help
screens and guides
EC and TDS measurements are fully
customizable and include: cell constant
selection between 0.010 and 10.000, PC Connectivity
selection of linear or natural water (non-
Logged data can be transferred to a Windows
linear) or no temperature compensation (for
compatible PC with the included HI920015
actual conductivity reading), configurable
temperature compensation coefficient range micro USB cable and HI92000 software.
from 0.00 to 10.00%/°C, choice of reference
temperatures of 15°C, 20°C and 25°C, and a
Data Logging Long Battery Life
selectable TDS factor between 0.40 and 1.00. The HI98197’s allows storage of up to 400
The display of the meter has a battery icon
log-on-demand samples or 1000 lot logging
Ten sets of customized measurement samples that can be later transferred to a PC indicator to show the remaining power.
parameters can be stored as a user profile and with the supplied HI920015 USB cable and The meter uses four 1.5V AA batteries that
later recalled. HI92000 software. provide up to 200 hours of battery life.
* The 0.000 µS/cm EC range and 0.1 MΩ•cm resistivity range are not available with the optional 4m cable probe
**Uncompensated temperature reading
www.hannainst.com | 5.23
5
5.24 | www.hannainst.com
5
Supplied complete
HI98197 is supplied complete with sensor, flow cell,
tubing, calibration solution, beakers, PC software
and connection cable, instruction manual, quick
start guide and batteries in the HI720197 rugged,
custom carrying case.
Conductivity / TDS
Specifications HI98197
0.000 to 9.999 μS/cm; 10.00 to 99.99 μS/cm; 100.0 to 999.9 μS/cm; 1.000 to 9.999 mS/cm; 10.00 to 99.99 mS/cm;
Range
100.0 to 1000.0 mS/cm (actual conductivity*; temperature compensated to 400 mS/cm)
Resolution 0.001 µS/cm; 0.01 µS/cm; 0.1 µS/cm; 0.001 mS/cm; 0.01 mS/cm; 0.1 mS/cm
EC
Accuracy ±1% of reading (±0.01 µS/cm or 1 digit, whichever is greater)
automatic up to five points with seven memorized standards (0.00 µS/cm, 84.0 µS/cm, 1.413 mS/cm, 5.00 mS/cm,
Calibration
12.88 mS/cm, 80.0 mS/cm, 111.8 mS/cm)
Range 0.00 to 99.99 ppm; 100.0 to 999.9 ppm; 1.000 to 9.999 g/L; 10.00 to 99.99 g/L; 100.0 to 400.0 g/L (autoranging)
TDS Resolution 0.01 ppm; 0.1 ppm; 0.001 g/L; 0.01 g/L; 0.1 g/L
1.0 to 99.9 Ω•cm; 100 to 999 Ω•cm; 1.00 to 9.99 KΩ•cm; 10.0 to 99.9 KΩ•cm; 100 to 999 KΩ•cm; 1.00 to 9.99 MΩ•cm;
Range
10.0 to 100.0 MΩ•cm (autoranging)
Resistivity
Resolution 0.1 Ω•cm; 1 Ω•cm; 0.01 KΩ•cm; 0.1 KΩ•cm; 1 KΩ•cm; 0.01 MΩ•cm; 0.1 MΩ•cm
Range % NaCl : 0.0 to 400.0%; practical salinity: 0.00 to 42.00 (PSU); seawater scale: 0.00 to 80.00 (ppt)
Calibration max. one point only in % NaCl range with HI7037 standard; use conductivity calibration for all other ranges
†
Resolution 0.1°C; 0.1°F
portable
Temperature
Accuracy ±0.2°C; ±0.4°F (excluding probe error)
Temperature Compensation NoTC, linear (-20.0 to 120.0°C; -4.0 to 248.0°F), non linear (0 to 36°C; 32 to 98.6°F) ISO/DIS 7888 std
PC Connectivity opto-isolated sealed USB (with HI92000 software and micro USB cable)
Battery Type / Life 1.5V AA batteries (4) / approximately 100 hours of continuous use (without backlight), 25 hours with backlight
HI98197 is supplied with HI763123 platinum, four-ring conductivity/TDS probe with internal temperature sensor and 1 m (3.3’) cable, HI605453
Ordering stainless steel flow cell for ultrapure water, tubing, HI7031M 1413 µS/cm calibration solution (230 mL), HI7033M 84 µS/cm calibration solution (230
Information mL), 100 mL plastic beaker (2), HI92000 PC software, HI920015 micro USB cable, 1.5V batteries (4), quality certificate, instruction manual and quick
start guide in an HI720197 rugged carrying case with custom insert.
EC, TDS and Salinity solutions begin on page 5.34 www.hannainst.com | 5.25
HI9835
5 EC/TDS/Salinity/°C
Meters
• ATC
·· Automatic temperature compensation
• Methods
·· Measures EC/TDS/Salinity/
Temperature
• Battery Error Prevention System (BEPS)
·· Alerts the user of low battery power
Conductivity / TDS
auto endpoint feature automatically freezes Range –20.0 to 120.0 °C (-4.0 to 248.0°F)
the display once a stable reading is reached. Temperature Resolution 0.1°C
Accuracy ±0.2°C (excluding probe error)
HI76309 conductivity probe EC
automatic, one point with six memorized values (84 µS/cm, 1413 µS/cm,
5.00 mS/cm, 12.88 mS/cm, 80.0 mS/cm, 111.8 mS/cm)
The HI76309 conductivity and temperature Calibration
Salinity one point with HI7037 calibration solution
probe features a PVC body with a stainless Temperature two point, at 0 and 50°C (32 and 122°F)
steel, four ring design. This design offers automatic or manual from –20.0 to 120.0 °C (-4.0 to 248.0°F) (can be disabled
Temperature
highly accurate readings over the entire Compensation for measuring conductivity activity)
conductivity range. Temperature
selectable from 0.00 to 6.00%/°C (EC and TDS only); default value is 1.90%/°C
Coefficient
• Four-ring design Reference
·· Immune to polarization and fouling 20°C or 25°C
Temperature
for longer periods of time TDS Conversion
selectable from 0.40 to 0.80 (default value is 0.50)
Additional Factor
Specifications HI76309 EC/TDS probe four-ring conductivity probe with internal
Probe
temperature sensor, DIN connector with 1m cable
1.5V AAA batteries (3) /approximately 200 hours of continuous use
Battery
without backlight (50 hours with backlight on); auto-off after 5, 10, 20 and
Type / Life
60 minutes (can be disabled)
Environment 0 to 50°C (32 to 122°F); RH max 95%
Dimensions 185 x 72 x 36 mm (7.3 x 2.8 x 1.4”)
Weight 300 g (10.6 oz)
Ordering HI9835 is supplied with HI76309 conductivity probe, batteries, instructions and rugged
Information carrying case.
5.26 | www.hannainst.com EC, TDS and Salinity solutions begin on page 5.34
HI99300 · HI99301
Portable EC Meters 5
EC/TDS and Temperature
• ATC
·· Automatic temperature compensation
• Methods
·· Measures EC/TDS and Temperature
• Battery Error Prevention System (BEPS)
·· Alerts the user of low battery power
that could adversely affect readings
Conductivity / TDS
• Battery indicator
·· Battery life indicator at startup
• One-point calibration
·· One-point EC/TDS calibration
• Waterproof
portable
Accuracy ±2% F.S. ±2% F.S. primary reading, temperature and calibration
Range 0 to 2000 ppm (mg/L) 0.00 to 10.00 ppt (g/L) guides simultaneously. Symbols and messages
TDS Resolution 1 ppm (mg/L) 0.01 ppt (g/L) on the LCD indicate meter status and guides
users through operations.
Accuracy ±2% F.S. ±2% F.S.
Range 0.0 to 60.0°C/32.0 to 140.0°F 0.0 to 60.0°C/32.0 to 140.0°F At start-up, the meter shows the remaining
Temperature Resolution 0.1°C/0.1°F 0.1°C/0.1°F battery percentage; when a low battery
Accuracy ±0.5°C/±1°F ±0.5°C/±1°F condition is detected, a battery symbol
appears on the LCD to advise the user that only
automatic, one point at 1413 automatic, one point at 12.88
Calibration µS/cm, 1382 ppm (CONV 0.5) or mS/cm, 6.44 ppt (CONV 0.5) or a few hours of working time is left.
1500 ppm (CONV 0.7) 9.02 ppt (CONV 0.7)
The HI76306 EC/TDS and temperature probe
EC/TDS Temperature automatic, 0 to 60°C (32 to 140°F) with β adjustable from 0.0 to
resists clogging and is easy to clean.
Compensation 2.4%/°C with 0.1% step
EC/TDS Factor adjustable from 0.45 to 1.00 with 0.01 step (default 0.50)
Additional
Specifications HI76306 EC/TDS probe with internal temperature sensor, DIN
Probe
connector and 1 m (3.3’) cable (included)
Battery Type / Life 1.5V AAA (3) / approximately 500 hours of continuous use
Ordering HI99300 and HI99301 are supplied with HI76306 EC/TDS probe, batteries, instructions
Information and rugged carrying case.
Why this meter is so important... Accuracy (@25°C/77°F) ±2% F.S. (0 to 15.00 mS/cm; excluding probe error)
Ordering HI993310 is supplied with HI76304 conductivity probe, HI76305 direct soil conductivity
Information probe, battery, instructions and rugged carrying case.
Multi-range EC Meter 5
• Four-ring Probe
·· The four-ring probe that comes with the
HI9033 offers a versatile and accurate
solution for conductivity readings. Four
ring technology allows for a larger range
of measurement within a single probe,
whereas other meters with two probe
technology is somewhat limited in the
range in which they can measure.
• Four Measurement Ranges
Conductivity / TDS
·· HI9033 offers four conductivity
measurement ranges. Each range has a
dedicated button on the face of the meter,
allowing users to easily switch between
ranges when necessary. The meter is
programmed to let the user know when
their current reading is out of range, and
a new range should then be selected.
• Automatic Temperature Compensation
·· Since temperature has such a dramatic
effect on conductivity readings, having
a meter that offers temperature
compensated readings is invaluable. The
probe of the HI9033 features a built-in
temperature sensor that automatically
accounts for the effects of temperature
on a sample’s conductivity reading in the
range of 0 to 50°C (32 to 122°F). The
temperature compensation coefficient,
also known as β, is set at 2%/°C; this factor
corrects the conductivity reading 2% for
each degree Celsius change in the sample.
• One-point Calibration
·· The HI9033 can be calibrated at one
point in a standard conductivity solution.
The calibration trimmer located on the
portable
top of the meter is easily adjusted to
the correct calibration standard.
• Battery Error Prevention System (BEPS)
Specifications HI9033 (EC) ·· The Battery Error Prevention System
detects when the batteries become too
0.0 to 199.9 µS/cm; 0 to 1999 µS/cm;
Range
0.00 to 19.99 mS/cm; 0.0 to 199.9 mS/cm
weak to ensure reliable measurements.
Accuracy
±1% F.S. (excluding probe error) The portable HI9033 EC meter is suitable for
(@25°C/77°F)
use in a variety of applications. It offers four
Calibration manual, one point
measurement ranges from 0.0 µS/cm to 199.9 mS/
TDS Factor — cm with a ±1% FS accuracy. The HI76302W four-
Temperature ring conductivity probe that is supplied with the
automatic, 10 to 50°C (50 to 122°F) with β = 2%/°C
Compensation meter allows for a wide range of measurements
HI76302W conductivity probe with internal temperature sensor, with a single sensor. The four ring technology also
Probe
DIN connector and 1 m (3.3’) cable (included) eliminates the polarization effect that is common
Battery Type / Life 1.5V AA (3) / approximately 400 hours of continuous use
with standard two pole versions. The probe also
features a built-in temperature sensor to allow for
Environment 0 to 50°C (32 to 122°F); RH max 100%
Automatic Temperature Compensation from 0 to
Dimensions 185 x 72 x 36 mm (7.3 x 2.8 x 1.4’’)
50°C (32 to 122°F).
Weight 300 g (10.6 oz.)
5 Multi-range EC
Meters
• Automatic temperature
compensation (ATC) (HI8733)
• Help feature
·· On-screen user guides
• One-point calibration
·· One-point calibration
• Waterproof
Conductivity / TDS
0.0 to 199.9 µS/cm; 0 to 1999 µS/cm 0.0 to 199.9 µS/cm; 0 to 1999 µS/cm
Range
0.00 to 19.99 mS/cm; 0.0 to 199.9 mS/cm 0.00 to 19.99 mS/cm; 0.0 to 199.9 mS/cm
Accuracy
±1% F.S. (excluding probe error) ±1% F.S. (excluding probe error)
(@25°C/77°F)
Environment 0 to 50°C (32 to 122°F); RH max 100% 0 to 50°C (32 to 122°F); RH max 100%
HI8633 is supplied with HI76301D conductivity probe, 12880 µS/cm HI70030 calibration
Ordering solution sachets (5), battery, instructions and rugged carrying case.
Information HI8733 is supplied with HI76302W conductivity probe, 12880 µS/cm HI70030
calibration solution sachets (5), battery, instructions and rugged carrying case.
EC and Resistivity 5
Meter
• Automatic temperature compensation (ATC)
• One-point calibration
• Help feature
·· On-screen user guides
• Waterproof
Conductivity / TDS
The HI87314 is a combination, portable meter
that can read conductivity in four different
ranges and resistivity.
portable
Specifications HI87314
Range 199.9 µS/cm; 1999 µS/cm; 19.99 mS/cm; 199.9 mS/cm
5 TDS Meter
• One-point calibration
• Waterproof
Specifications HI8734
Range 0.0 to 199.9 mg/L (ppm); 0 to 1999 mg/L (ppm); 0.00 to 19.99 g/L (ppt)
Temperature
manual from 0 to 50°C (32 to 122°F) with β = 2%/°C
Compensation
Ordering HI8734 is supplied with HI76301D conductivity probe, HI70032 1382 mg/L (ppm)
Information calibration solution sachet, battery, instructions and rugged carrying case.
EC/TDS Meter 5
• One-point calibration
• Manual temperature compensation
Conductivity / TDS
measures conductivity with the utmost
accuracy and reliability.
portable
Specifications HI8033
Ranges 0.0 to 199.9 µS/cm; 0 to 1999 µS/cm; 0.00 to 19.99 mS/cm
EC
Resolution 0.1 µS/cm; 1 µS/cm; 0.01 mS/cm
Temperature
manual from 0 to 50°C (32 to 122°F) with β=2%/°C
Compensation
Ordering
HI8033 is supplied with HI76301W conductivity probe, battery and instructions.
Information
5.34 | www.hannainst.com
EC Calibration
Solutions 5
Quality Solutions for Laboratory
Applications
Conductivity / TDS
expiration date, and temperature
correlation table are reported on
all Hanna calibration solutions.
• NIST traceability
·· Standardized using a conductivity
meter and probe calibrated against
NIST primary standard solutions or
primary standard solutions prepared
following NIST guidelines.
• Air-tight bottles
·· Air tight bottle with tamper-proof
seal of freshness to ensure quality.
• Single use sachets
·· Light block packaging prevents
oxidation from UV light that could
alter the value. Every sachet is as
fresh as the day it was packaged.
• FDA compliant bottles (HI80xx)
·· Hanna solutions are offered in
opaque, light-tight bottles that
meet FDA requirements.
• High Accuracy Solutions (HI60xx)
1413 µS/cm Bottles ·· HI60xx high accuracy solutions are
also available and are supplied with a
FDA Certificate
Code EC Value @25°C Size Package certificate of analysis.
Bottle of Analysis
solutions
HI6031 1413 µS/cm 500 mL 1 bottle •
www.hannainst.com | 5.35
EC Calibration
5 Solutions
Quality Solutions for Laboratory
Applications
5.36 | www.hannainst.com
EC Calibration
Solutions 5
Quality Solutions for Laboratory
Applications
Conductivity / TDS
expiration date, and temperature
correlation table are reported on
all Hanna calibration solutions.
• NIST traceability
·· Standardized using a conductivity
meter and probe calibrated against
NIST primary standard solutions or
primary standard solutions prepared
following NIST guidelines.
• Air-tight bottles
·· Air tight bottle with tamper-proof
seal of freshness to ensure quality.
• Single use sachets
·· Light block packaging prevents
oxidation from UV light that could
alter the value. Every sachet is as
fresh as the day it was packaged.
• FDA compliant bottles (HI80xx)
·· Hanna solutions are offered in
opaque, light-tight bottles that
meet FDA requirements.
solutions
HI7030/1G 12880 µS/cm 1 G (3.78 L) 1 bottle
The 12880 µS/cm (12.88 mS/cm) calibration
HI7030/1L 12880 µS/cm 1L 1 bottle
solution is widely used to assure the proper
HI7030L 12880 µS/cm 500 mL 1 bottle performance of conductivity meters with a
HI7030M 12880 µS/cm 230 mL 1 bottle scale higher than 10 mS/cm.
HI5030-12 12880 µS/cm 120 mL 1 bottle
This solution is used mainly for industrial
HI8030L 12880 µS/cm 500 mL 1 bottle • •
applications and is available in various sizes
to better meet user requirements.
www.hannainst.com | 5.37
EC Calibration
5 Solutions
Quality Solutions for Laboratory
Applications
This calibration solution is also ideal for use in HI5034-12 80000 µS/cm 120 mL 1 bottle
5.38 | www.hannainst.com
TDS Calibration
Solutions 5
Quality Solutions for Laboratory
Applications
Conductivity / TDS
expiration date, and temperature
correlation table are reported on
all Hanna calibration solutions.
• NIST traceability
·· Standardized using a conductivity
meter and probe calibrated against
NIST primary standard solutions or
primary standard solutions prepared
following NIST guidelines.
• Air-tight bottles
·· Air tight bottle with tamper-proof
seal of freshness to ensure quality.
• Single use sachets
·· Light block packaging prevents
oxidation from UV light that could alter
the value. Every sachet is as fresh as
the day it was packaged.
TDS Solutions
TDS Bottles
Hanna TDS calibration solutions are prepared
Certificate against a NIST traceable potassium chloride
Code TDS Value @25°C Size Package
of Analysis solution.
HI6032 1382 mg/L (ppm) 500 mL 1 bottle •
HI7032/1L 1382 mg/L (ppm) 1L 1 bottle Hanna TDS solutions have the lot number and
expiration date clearly marked on the label
solutions
HI7032L 1382 mg/L (ppm) 500 mL 1 bottle
and are air tight with a tamper-proof seal to
HI7032M 1382 mg/L (ppm) 230 mL 1 bottle
ensure the quality of the solution. Hanna’s
HI7036/1L 12.41 g/L (ppt) 1L 1 bottle line of TDS calibration solutions have been
HI7036L 12.41 g/L (ppt) 500 mL 1 bottle specially formulated to have an expiration of
HI70442/1L* 1500 mg/L (ppm) 500 mL 1 bottle 5 years from the date of manufacture for an
unopened bottle.
HI70442L* 1500 mg/L (ppm) 500 mL 1 bottle
TDS Sachets
Certificate
Code TDS Value @25°C Size Package
of Analysis
HI70032C 1382 mg/L (ppm) 20 mL 25 sachets •
www.hannainst.com | 5.39
Quick Cal
5
pH/EC Quick Cal Calibration
Solution
Quick Cal is for use with Hanna’s GroLine pH
and/or EC/TDS meters. Using the Quick Cal
function found in compatible meters allows
for single-point calibration for pH and/or
conductivity sensors.
• NaCl calibration solution for % readings of salinity. Code Description Size Package
• Air tight bottle with tamper-proof seal to ensure quality. HI7037L 100% NaCl 500 mL 1 bottle
5.40 | www.hannainst.com
Table of Contents 6
Dissolved Oxygen
Introduction�������������������������6.2 Probes��������������������������������� 6.23
table of contents
Product Spotlights������������������������������������������� 6.3 Standard������������������������������������������������������������ 6.23
Comparison Guide�������������������������������������������� 6.3 With Protective Sleeve������������������������������� 6.24
Thin and Light������������������������������������������������� 6.25
Galvanic��������������������������������������������������������������6.26
edge®�������������������������������������6.4 edge Compatible�������������������������������������������� 6.27
edge������������������������������������������������������������������������6.4 Research Grade Slim������������������������������������6.28
edge DO�����������������������������������������������������������������6.8
Solutions�����������������6.23-6.28
Benchtop��������������������������� 6.12
Portable������������������������������ 6.16
Dissolved Oxygen and BOD�����������������������6.16
Aquaculture Specific����������������������������������� 6.19
General Water Applications����������������������6.20
Classic Manual Calibration������������������������� 6.23
Dissolved Oxygen Theory and Measurement Wine and beer are both affected by oxygen at various stages during
production and storage. DO is an important parameter to monitor for
Dissolved oxygen (DO) is a measure of how much oxygen is dissolved
those who wish to produce consistent, high quality products.
in a system. Measurements are usually taken in water using a DO
probe and meter. Henry’s Law states that the concentration of gas in
a solution is directly proportional to the partial pressure of that gas Laboratory Monitoring of BOD, OUR and SOUR
above the solution. Henry’s Law constant is a factor of proportionality,
BOD (Biochemical Oxygen Demand) is a measurement that indicates
and so is specific to the gas in the solvent being measured.
Dissolved Oxygen
As the temperature of a solution increases, the particle movement consumed per gram of volatile suspended solids (VSS) per hour. This
within that solution increases. With greater particle motion, dissolved quick measurement has many advantages: rapid measure of influent
gases escape more readily from solution. In warm water, oxygen is less organic load and biodegradability, indication of the presence of toxic
soluble while in cold water, oxygen is more soluble. DO concentration or inhibitory wastes, degree of stability and condition of a sample, and
introduction
in air saturated waters decreases with increasing temperature. calculation of oxygen demand rates at various points in the aeration
basin.
Atmospheric pressure decreases as altitude increases. Since there
is lower partial pressure, oxygen is less soluble at higher altitudes.
DO concentration in air saturated waters decreases with increasing Types of Dissolved Oxygen Probes
elevations. Hanna’s dissolved oxygen meters utilize one of two common types of
sensing probes: polarographic sensors and galvanic sensors.
Applications
Polarographic DO probes consist of a working electrode (cathode)
Water quality measurements are vital to environmental monitoring.
and a counter electrode (anode). A polarizing voltage is applied to
In quiescent lakes and rivers, the decay of organic matter can cause
bacteria levels to increase. The aerobic bacteria consume oxygen, these electrodes that is specific for the reduction of oxygen. A thin,
triggering a deficiency that can cause a water body "to die," killing gas permeable membrane isolates the sensor elements from the water
aquatic plants and animals. sample but allows oxygen to pass through. The oxygen that passes
through the membrane is reduced at the cathode, causing a current
Aquaculture is the breeding, rearing, and harvesting of plants and from which the oxygen concentration is determined. Two-electrode
animals in all types of water environments. Dissolved oxygen is polarographic probes use the anode as a reference electrode.
needed by fish, zooplankton, and plants to survive and reproduce.
DO measurements are used to monitor and control the environment Galvanic DO probes consist of a working electrode (cathode) and a
required for success.
counter electrode (anode) that act as a battery to produce a voltage
specific for the reduction of oxygen. A thin, gas permeable membrane
Wastewater treatment plants rely on bacteria to break down the
organic compounds found in water. If the amount of dissolved oxygen in isolates the sensor elements from the water sample but allows oxygen
the wastewater is too low, these bacteria will die and septic conditions to pass through. The oxygen that passes through the membrane
will occur. The amount of DO must be consistently monitored to ensure is reduced at the cathode, causing a current from which the oxygen
proper waste treatment. concentration is determined.
6.2 | www.hannainst.com
Product Spotlights 6
HI98193
Professional Waterproof
Meters
Dissolved Oxygen and BOD
Dissolved Oxygen
The HI98193 is a portable DO meter with extended ranges of up to
50 ppm and 600% saturation. HI98193 features compensations for
pressure, temperature and salinity, which are essential for an accurate
dissolved oxygen reading. HI98193 is supplied with the HI764073
polarographic dissolved oxygen probe that utilizes field replaceable
PTFE membrane caps.
HI9147
Dissolved Oxygen
Meter for Aquaculture
The HI9147 is designed for aquaculture applications. This unit is unique
among our family of DO meters as it is supplied with a galvanic probe.
Comparison Guide
Capacitive Touch Buttons
Dissolved Oxygen Range
Altitude Compensation
Salinity Compensation
Temperature Range(s)
DO Calibration Points
Barometric Pressure
Barometric Pressure
Benchtop, Portable
Calibration Points
% Saturation O2
PC Connectivity
& Wall-Mount
Hold Feature
Logging
Alarm
BEPS
Page
GLP
ATC
Bench Meters
edge • • • • 2 • • • • • • 6.4
edge®DO • • • • 2 • • • • • • 6.8
HI2400 • • • • °C 2 • • • • 6.14
Portable Meters
HI98193 • • • • °C/°F 2 1 • • • • • • 6.16
HI9146 • • • • °C 2 • • • 6.20
www.hannainst.com | 6.3
6
pH • EC • DO
Dissolved Oxygen
edge
6.4 | www.hannainst.com
edge® technical edge design features
features
6
Rechargeable Battery
edge has a built in rechargeable battery that
is charged when the meter is in the plugged
in benchtop or wall mount cradle. The battery
can also be recharged through the micro USB
port with either a USB port from a computer or
GLP
directly to the power supply. Data of the last calibration you perform
is stored in the sensor including the date,
Dissolved Oxygen
time, and buffers used. When the sensor is
connected to edge, GLP data is automatically
Capacitive touch keypad
transferred. edge features sensitive capacitive touch
buttons for accurate keystrokes when
Two Operating Modes
navigating edge’s menus and screens. Since
edge can be used in Extended or Basic
they are part of the screen, the buttons can
Operating Modes. Extended Mode enables
never get clogged with sample residue.
all edge features while Basic Mode reduces
Two USB ports features—ideal for routine measurements by
displaying a simplified screen and features.
edge includes one standard USB for exporting
data to a flash drive. edge also includes one
edge pH Features*
micro USB port for exporting files to your
computer as well as for charging when the 5.5"
cradle is not available.
edge
edge features clear, full text guides displayed
pH buffers during the calibration process to
on the bottom of the screen. There is no
alert the user of potential problems such as a
need to decipher scrambled abbreviations or
contaminated buffer or dirty electrode. After
symbols; these helpful messages guide you
calibration, indicators for probe condition are
through every process quickly and easily.
displayed on the measurement screen. The
probe condition is based on offset and slope
characteristics of the pH electrode.
records of data. Data sets include readings, edge measures ORP with edge compatible built-in connector to power and charge the
GLP data, date and time. ORP probes. batteries.
* Using edge compatible pH electrodes
www.hannainst.com | 6.5
6
Dissolved Oxygen
6.6 | www.hannainst.com
6
Dissolved Oxygen
Digital electrodes 0% (solution) and 100% (air)
• Data logging
edge® measures pH, conductivity and ·· Manual log-on-demand
dissolved oxygen through its unique digital ·· Manual log-on-stability
electrodes. These digital electrodes are auto- ·· Interval logging
recognized, providing sensor type, calibration
• Automatic Temperature
data and a serial number when connected to
Compensation from 0 to 50 °C
edge by an easy to plug-in 3.5mm connector.
Sleek design
• GLP data
• Simply connect each probe via the ·· Records date, time, calibration Incredibly thin and lightweight, edge
3.5 mm jack, Digital Smart Electrodes standards, altitude value measures just 1/2” (12 mm) thick and
are automatically recognized and salinity value weighs just 8.8 ounces (250 g).
edge
Resolution 0.01 ppm (mg/L); 0.1 % saturation
Dissolved Oxygen Calibration one or two-point at 0% (HI7040 solution) and 100% (in air)
Altitude Compensation -500 to 4000 m (-1640 to 13120') (with 100 m (328') resolution)
Probe (included in DO kit) HI764080 digital dissolved oxygen electrode with 3.5 mm (1/8”) connector and 1 m (3.3’) cable
up to 1000 records organized in: manual log-on-demand (max. 200 logs), manual log-on-stability (max. 200 logs),
Logging
interval logging (max. 600 samples; 100 lots)
Additional Connectivity 1 USB port for storage; 1 micro USB port for charging and PC connectivity
Specifications
Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing
Dimensions / Weight 202 x 140 x 12 mm (7.9” x 5.5” x 0.5”) / 250 g (8.82 oz.)
HI2040-01 (115V) and HI2040-02 (230V) DO kit also includes: HI764080 dissolved oxygen electrode,
Ordering HI7041S refill electrolyte solution, DO membrane caps (2), o-rings (2)
Information
All edge compatible pH, EC and DO digital probes are interchangeable with HI2040 and can be ordered separately.
6.8 | www.hannainst.com
edge®DO technical
features 6
Rechargeable Battery
edge DO has a built in rechargeable battery
that is charged when the meter is in the
plugged in benchtop or wall mount cradle. The
battery can also be recharged through the
micro USB port with either a USB port from a
computer or directly to the power supply.
Dissolved Oxygen
GLP Zero footprint
Data of the last calibration you perform
Using the wall mount cradle (included),
is stored in the sensor including the date,
edge DO can be placed on a wall, leaving zero
time, and buffers used. When the sensor
footprint on the benchtop space. The cradle
is connected to edge DO, GLP data is
automatically transferred. has a built-in connector to power and charge
Two USB ports
the batteries.
edge DO includes one standard USB for
exporting data to a flash drive. edge also
includes one micro USB port for exporting
edge DO design
files to your computer as well as for charging
when the cradle is not available.
features
edge®DO
3.5 mm probe input
Plugging an electrode in has never been
simpler; no alignments or broken pins, simply
Clear, full text readout connect the 3.5 mm plug and begin. Digital
Capacitive touch keypad
edge DO
edge DO features clear, full text guides electrodes are automatically recognized.
displayed on the bottom of the screen. edge DO features sensitive capacitive touch
There is no need to decipher scrambled buttons for accurate keystrokes when
abbreviations or symbols; these helpful navigating edge’s menus and screens. Since
messages guide you through every process
they are part of the screen, the buttons can
quickly and easily.
never get clogged with sample residue.
5.5"
Sleek design
Incredibly thin and lightweight, edge
measures just 1/2” (12 mm) thick and weighs
www.hannainst.com | 6.9
6
Dissolved Oxygen
6.10 | www.hannainst.com
6
Digital electrodes
edge®DO performs measurements through
its unique digital electrodes. These digital
electrodes are auto-recognized, providing
sensor type, calibration data and a serial
number when connected to edge DO by an
easy to plug-in 3.5 mm connector.
Dissolved Oxygen
Dissolved oxygen
electrode
HI764080 (included)
Dissolved oxygen electrode
with temperature sensor
Recommended for general
purpose
edge DO
Calibration one or two-point at 0% (HI7040 solution) and 100% (in air)
Dissolved Oxygen
Temperature
ATC (0 to 50°C; 32.0 to 122.0°F)*
Compensation
Altitude Compensation -500 to 4000 m (-1640 to 13120') (with 100 m (328') resolution)
Probe HI764080 digital dissolved oxygen electrode with 3.5 mm (1/8”) connector and 1 m (3.3’) cable (included)
up to 1000 records organized in: manual log-on-demand (max. 200 logs), manual log-on-stability (max. 200 logs),
Logging
interval logging (max. 600 samples; 100 lots)
Connectivity 1 USB port for storage; 1 micro USB port for charging and PC connectivity
Additional
Specifications Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing
HI2004-01 (115V) and HI2004-02 (230V) edge DO includes: HI764080 dissolved oxygen electrode, HI7041S refill electrolyte solution,
Ordering
DO membrane caps (2), o-rings (2), benchtop docking station with electrode holder, wall-mount cradle, USB cable, 5 VDC power adapter,
Information quality certificates and instruction manual.
6 Research Grade
Bench Meter
Dissolved Oxygen and BOD
Dissolved Oxygen
The HI5421 is an advanced research grade Capacitive Touch BOD, OUR and Sour
benchtop Dissolved Oxygen and BOD meter
that is completely customizable with a large The HI5421 features sensitive capacitive Measurement Modes
color LCD, capacitive touch keys, and USB touch buttons for accurate keystrokes when
An additional three measurement modes
port for computer connectivity. The HI5421 is navigating menus and screens. There are
benchtop
on-screen help, graphic, and custom color Automatic standard recognition is available
configurations. The display allows for real- for two points at 0% and 100% saturation or
Data Transfer
time graphing and the use of virtual keys 0 mg/L and 8.26 mg/L. A user standard option Data can be transferred to a PC with USB cable
provide for an intuitive user interface. is available for a user defined value. and HI92000 software (both sold separately).
6.12 | www.hannainst.com
Data Logging
Three selectable logging modes are available
on the HI5421: automatic, manual, and
On-screen Features 6
AutoHold logging. Automatic and manual
logs up to 100 lots with 50,000 records max/
lot, with up to 100,000 total data points.
Automatic logging features the option to
save data according to sampling period and
interval.
Contextual Help
Contextual help is always available through a DO probe included
dedicated “HELP” key. Clear tutorial messages The HI5421 is supplied with the HI76483
Dissolved Oxygen
and directions are available on-screen to Clark-Type Polarographic probe. This probe
quickly and easily guide users through is only 12 mm in diameter and has a built
setup and calibration. The help information in thermistor temperature sensor that
displayed is relative to the setting/option compensates for temperature variations
being viewed. from 0 to 50°C.
benchtop
Measurement Modes OUR (oxygen uptake rate); SOUR (specific oxygen
uptake rate)
Accurate, Repeatable Calibration is performed at one or two points monitoring of DO. The logging interval is
at 0% using Hanna’s HI7040 solution or automatic with user-selectable intervals
Measurements 100% in air. from 5 seconds to 180 minutes.
The HI2400 is a dissolved oxygen benchtop
meter with automatic calibration and % Data Logging GLP Capabilities
or mg/L (ppm) measurement range. The
With a built-in logging function,
measurement is automatically compensated The HI2400 also provides users with GLP
measurements are stored in non-volatile
for altitude and salinity based on the user memory, and can be transferred to a PC (Good Laboratory Practice) capabilities. GLP is
settings for altitude up to 4000 m and salinity through the USB port using the optional a set of functions that allow the storage and
up to 40 g/L. HI92000 software and HI920013 USB cable. retrieval of data regarding calibration. The
The software is provided with an exclusive GLP feature provides data consistency and a
Measurements are automatically temperature
online guide of all the commands available and
compensated by using the polarographic DO calibration reminder which can be set to alert
allows data printing, plotting and exporting.
probe with built-in temperature sensor. This the user that too much time has elapsed since
probe features screw cap membranes for easy The 8000 record logging interval allows the last calibration and a new one should be
replacement. the possibility of process and experimental performed.
6.14 | www.hannainst.com
6
Dissolved Oxygen
HI76407 HI76408 HI76407A/P
benchtop
Specifications HI2400
Range 0.00 to 45.00 mg/L (ppm); 0.0 to 300.0% saturation
Calibration one or two points at 0% (HI7040 solution) and 100% (in air)
Temperature
automatic from 0.0 to 50.0°C (32.0 to 122°F)
Compensation
Probe HI76407/2 polarographic DO probe with internal temperature sensor, DIN connector and 2 m (6.6’) cable (included)
Logging Interval 5, 10, 30 seconds or 1, 2, 5, 10, 15, 30, 60, 120, 180 minutes
Ordering HI2400-01 (115V) and HI2400-02 (230V) are supplied with HI76407/2 dissolved oxygen probe, HI76407A membrane caps (2),
Information HI7041S electrolyte solution (30 mL), 12 VDC adapter and instructions.
See page 6.23 and 6.25 for DO solutions and accessories www.hannainst.com | 6.15
HI98193
6 Professional
Waterproof Meters
Dissolved Oxygen and BOD
• Waterproof
·· IP67 rated waterproof, rugged enclosure
• Choice of units
·· Display units in % saturation
or mg/L (ppm)
• Salinity compensation
Dissolved Oxygen
6.16 | www.hannainst.com
to improve the accuracy and precision of Built-in Barometer
6
readings.
With the internal barometer, the HI98193 is
BOD, OUR and SOUR able to compensate for changes in barometric
pressure so there is no need for charts,
altitude information or external barometric
pressure information.
Dissolved Oxygen
• BOD results
for an intuitive user interface.
·· BOD is calculated in mg per liter
from the difference between the
Waterproof Protection initial and final dissolved oxygen
The meter is enclosed in an IP67 rated
waterproof casing and can withstand
immersion in water at a depth of 1 m for up
to 30 minutes. The probe features an IP68
rating for continuous immersion in water.
Data Logging
The HI98193’s log on-demand feature allows
users to store up to 400 readings. This data
can then be transferred to a PC with the
• BOD parameters and records
HI920015 USB cable and HI92000 software.
·· All necessary parameters
for BOD testing can be set
and displayed at once.
·· A list of all saved BOD data can be easily
retrieved and shown on the LCD display.
portable
Comprehensive GLP functions are directly
The HI764073's built-in temperature
accessible by pressing the GLP key. This data
sensor allows for automatic temperature
compensation. The temperature sensor can • OUR results includes date, time, pressure, calibrated
be calibrated to one or two points. Manual ·· Measured in mg of oxygen value, temperature and salinity value of the
entry of salinity values allows for the salinity consumed per L per hour. last calibration.
compensation of dissolved oxygen readings
in saline waters. Intuitive Keypad
The fitted rubber keypad has dedicated keys
for power, backlight, up/down arrows, help
and alphanumeric characters. The meter also
features two virtual soft keys that navigate
the user through the configuration of each
parameter, meter setup, and logging of data.
The interface is intuitive for any user’s level
• SOUR results of experience.
·· Measured in mg of oxygen consumed per
g of volatile suspended solids per hour.
Measurement Dedicated Help Key
The HI98193 has extended ranges of up to 50
AutoHold Access help at any time at the press of a
ppm and 600% saturation. When measuring Pressing AutoHold during measurement will dedicated button and view content specific
dissolved oxygen, compensations for salinity, automatically hold the first stable reading on information based on the screen that is
temperature and pressure are essential the display. currently being viewed.
www.hannainst.com | 6.17
6
Rugged custom
carrying case
The HI98193 meter, probe, and
all accessories are supplied in the
Setup screen HI720193 rugged carrying case
Our extensive setup screen features a host designed to provide years of use.
of configurable options such as time, date, The inside compartment of the
temperature units and language for help carrying case is thermoformed
Dissolved Oxygen
Specifications HI98193
Range 0.00 to 50.00 mg/L (ppm); 0.0 to 600.0% saturation
compatible PC with the included HI920015 Pressure Accuracy (@25°C/77°F) ± 3 mmHg within ±15% from the calibration point
micro USB cable and HI92000 software. Calibration one point at any in range pressure value
Temperature
automatic from 0.0 to 50.0 °C (32.0 to 122.0 °F)
Compensation
Dissolved Oxygen 6
Meter for
Aquaculture
• Automatic Temperature
Compensation (ATC)
• Waterpoof
• Backlit LCD
Dissolved Oxygen
The HI9147 is designed for aquaculture
applications. This unit is unique among
our family of DO meters as it is supplied
with a galvanic probe.
portable
Specifications HI9147
Range 0.0 to 50.0 mg/L (ppm); 0 to 600% saturation
Temperature
automatic, 0° to 50°C (32°F to 122°F)
Compensation
Battery Type / Life 1.5V AAA (3) / approx. 1000 hours of continuous use without backlight
HI9147-04 is supplied with HI76409/4 probe with 4 m (13’) cable, spare membranes (5), electrolyte solution (30 mL), batteries, screwdriver and instructions.
Ordering
HI9147-10 is supplied with HI76409/10 probe with 10 m (32.8’) cable, spare membranes (5), electrolyte solution (30 mL), batteries, screwdriver and instructions.
Information
HI9147-15 is supplied with HI76409/15 probe with 15 m (49.2’) cable, spare membranes (5), electrolyte solution (30 mL), batteries, screwdriver and instructions.
6 Dissolved Oxygen
Meter
Dissolved oxygen is a commonly measured
parameter in aquaculture, wastewater
treatment, environmental studies, and wine
analysis. The HI9146 is a rugged, portable
dissolved oxygen (DO) meter designed
to provide high accuracy measurements
whether in the field or in the lab. The meter
features automatic calibration performed at
Dissolved Oxygen
6.20 | www.hannainst.com
Polarographic Measuring Automatic Temperature Backlit LCD
System Compensation The HI9146 has a display with a backlight
for easy viewing of readings in poor lighting
6
The meter and probe use polarographic
All readings are automatically compensated
sensor technology based on the Ross and conditions.
for temperature variations with a high
Clark polarographic measurement method.
The probe is comprised of a platinum accuracy, built in linearized thermistor Battery Error Prevention System
cathode and silver anode in an electrolyte temperature sensor behind a stainless steel
solution held in place over the surfaces of
(BEPS)
cover.
the electrodes by a polymer membrane. An The Battery Error Prevention System
external voltage applied across the system detects when the batteries become too
establishes a current proportional to the Altitude Compensation weak to ensure reliable measurements. The
concentration of dissolved oxygen. The HI9146 allows for altitude compensation backlight feature is automatically disabled
when batteries are getting low and a clear
Replaceable Membrane Caps for up to 4000 meters with a 100 meter
Dissolved Oxygen
resolution. indication is displayed to warn the user of this
The pretensioned thin polytetrafluoroethylene condition.
(PTFE) membranes employ a screw cap
design that can be changed quickly by simply Salinity Compensation
filling with the HI7041 electrolyte fill solution
Salinity compensation is adjustable from 0
and screw on the DO probe.
to 80 g/L (ppt) with a 1 g/L resolution for the
Automatic Calibration measurement of DO is brackish and seawater.
Specifications HI9146
portable
Range 0.00 to 45.00 mg/L (ppm); 0.0 to 300.0% saturation
Dissolved Oxygen
one or two points at 0% (HI7040 solution) and 100% (in air)
Calibration
Temperature
automatic from 0 to 50°C (32 to 122°F)
Compensation
Battery Type / Life 1.5V AAA (3) /approximately 200 hours of continuous use without backlight (50 hours with backlight on)
HI9146-04 is supplied complete with HI76407/4F probe with 4 m (13.1’) cable, HI76407A membranes (2), HI7041S electrolyte solution (30 mL),
Ordering batteries, instructions and rugged carrying case.
Information HI9146-10 is supplied complete with HI76407/10F probe with 10 m (32.8’) cable, HI76407A membranes (2), HI7041S electrolyte solution (30 mL),
batteries, instructions and rugged carrying case.
6 Manual Calibration
Dissolved Oxygen
Meter
• Automatic Temperature
Compensation (ATC)
• One or two-point calibration
• Waterproof
Dissolved Oxygen
Specifications HI9142
Range 0.0 to 19.9 mg/L (ppm)
Temperature
automatic, 0 to 50°C (32 to 122°F)
Compensation
HI9142 is supplied with HI 76407/4 probe with 4 m (13’) cable, 2 spare membranes,
Ordering
HI7041S electrolyte solution (30 mL), calibration screwdriver, batteries, instructions
Information and rugged carrying case.
Dissolved Oxygen
from the water sample being measured.
3
78.6 mm
2 Protective sleeve
portable
HI76407 Thin, permeable PTFE membrane
isolates the sensor elements from the
testing solution, but allows oxygen to
enter (HI76407A/P)
8
Cable Recommended
Probe
Length Meter
HI76407A/P HI7041 HI76407/2 2 m (6.6’)
HI76407/10
4 m (13’)
10 m (33’)
HI2400
HI9142
www.hannainst.com | 6.23
HI76407 · HI764073 Protected Sleeve Series
6 DO Probe 1
with Protective Sleeve
2
The HI76407/F is a standard Clark-type
polarographic dissolved oxygen probe for
Hanna’s benchtop and portable dissolved
oxygen meters. The probe is constructed of 025 mm
durable ABS plastic and contains an integrated
temperature sensor for temperature
compensated measurements. It is compatible
with our HI76407A/P PTFE membrane caps.
Each membrane separates the probe’s
3
Dissolved Oxygen
131.5 mm
78.6 mm
158 mm
the water sample being measured. Oxygen
diffuses across the membrane and interacts
with the polarographic system to produce a
current proportional to oxygen concentration.
Each cap is easily filled with HI7041 electrolyte
and screwed on to the probe. The probe’s
protective sleeve makes it ideal for use in
rugged or demanding environments.
2 Protective sleeve
7
probes and solutions
025 mm
Screw cap membrane that holds
potassium chloride electrolyte
solution (HI7041S)
6.24 | www.hannainst.com
HI76408 · HI76408W
1
1
Thinner, Lighter 6
2 Probe
2 for Laboratories
Dissolved Oxygen
183.20 mm
157 mm
5 5
6 Silver wire anode element
www.hannainst.com | 6.25
HI76409
1
6 Galvanic DO Probe
with Protective Cap
2
The HI76409 is a standard galvanic dissolved
oxygen probe for use with the HI9147
portable dissolved oxygen meter. Galvanic
probes require no conditioning time and
therefore allow the ability to measure
instantaneously. With extreme portability
3
and a straightforward design, this probe is
ideal for both field and lab use.
Dissolved Oxygen
125 mm
137 mm
95 mm
the oxygen concentration is determined.
2 Flex protect
4 Temperature sensors
6
probes and solutions
Cable Recommended
Probe
Length Meter
HI76409/4 4 m (13’) HI9147 (meter
HI76409/10 10 m (33’) specific, fixed probe)
7
55.5 mm
6.26 | www.hannainst.com
1 HI764080
edge® Compatible 6
Digital DO Probe
2 The HI 764080 is a digital dissolved oxygen
53.5 mm
Dissolved Oxygen
silver/silver chloride anode, an integrated
3 temperature sensor, and easily replaceable
PTFE membrane caps. The HI 764080 is
designed for use with Hanna’s edge® pH/EC/
DO meter.
120 mm
• Digital Microprocessor
• Ultra-thin design – 12mm
body for convenience
• Replaceable membranes – easy
4 screw on for easy maintenance
• Polarographic sensor
• Built-in temperature sensor
5
• 3.5mm digital plug – easy to plug
in, no alignment necessary
6
1 Strain relief
7
8 2 Probe cap
5
63.9 mm
10 7 Glass insulator
www.hannainst.com | 6.27
HI76483
1
6 Polarographic
DO Probe
The HI76483 Clark-Type Polarographic probe
2
53.5 mm
measures a wide range of dissolved oxygen
from 0.0 to 600% saturation and 0.00 to 016 mm
120 mm
• Durable PEI (polyetherimide)
body and membrane cap has
outstanding chemical resistance
• Incorporated 1 m cable and DIN connector 4
1 Strain relief
5
2 Probe cap
7 Glass insulator
9
8 Platinum cathode
63.9 mm
HI76483A/P
Electrolyte
Easy, Screw Solution
Cap DO It is crucial to the performance of your DO
probe to keep the sensor active with regular
6.28 | www.hannainst.com
7
Table of Contents
Multiparameter
Multiparameter Guide���������7.2
table of contents
Product Spotlights����������������������������������������������� 7.2
Comparison Guides���������������������������������������������� 7.2
Benchtop�������������������������������� 7.4
Portable��������������������������������� 7.16
GroLine ������������������������������������������������������������������7.44
Replacement
Probes������������������������������������7.50
HI9829
selectable parameters.
Combined with one of the HI76x9829 series probes, the HI9829 can
measure water quality parameters such as pH, ORP, conductivity,
turbidity, temperature, ions ammonium, nitrate, chloride (as NH4+—N,
NO3——N or Cl—), dissolved oxygen (as % saturation or concentration),
resistivity, TDS, salinity, and seawater σ. Atmospheric pressure is
measured for DO concentration compensation.
Multiparameter Guide
(B) Benchtop, (P) Portable
Dissolved Oxygen
Fast Tracker™
Temperature
Atmospheric
Seawater σ
Ammonium
Resistivity
Turbidity
Pressure
Chloride
Logging
Salinity
Nitrate
Page
ORP
TDS
GPS
ISE
pH
EC
HI5522 B • • • • • • • • • 7.4
HI5521 B • • • • • • • • 7.10
HI2550 B • • • • • • • • 7.14
HI9829 P • • • • • • • • • • • • • • •1 • • 7.16
HI98194 P • • • • • • • • • • • 7.30
HI98195 P • • • • • • • • • 7.34
HI98196 P • • • • • • 7.38
HI991300 P • • • • 7.42
HI991301 P • • • • 7.42
HI9814 P • • • • 7.44
HI9813-5 P • • • • 7.46
HI9813-6 P • • • • 7.46
HI9811-5 P • • • • 7.48
HI9812-5 P • • • • 7.48
1 Select Models
7.2 | www.hannainst.com
Product Spotlights 7
Multiparameter Meters
pH / mV, ORP, EC, TDS, Resistivity, Salinity, Seawater σ,
Dissolved Oxygen Atmospheric Pressure and Temperature
Multiparameter
meter features our rugged, easy connect multi-function probe with
field replaceable sensors.
product spotlights
HI9814
www.hannainst.com | 7.3
HI5522
The HI5522 is an advanced research grade benchtop pH/ORP/ISE and HI76312 four-ring conductivity probe that operates over a wide range
EC/TDS/Salinity/Resistivity meter that is completely customizable from 0.000 μS/cm to 1000.0 mS/cm*. The meter can be set to auto-
with a large color LCD, capacitive touch keys, and USB port for ranging in which the meter chooses the appropriate conductivity
computer connectivity. range from seven ranges or fixed range in which the meter will only
display reading in μS/cm or mS/cm. All readings are automatically
The HI5522 is a two-channel meter that allows for simultaneous compensated for temperature variations with a built in temperature
measure of pH, ORP, or ISE on one channel and EC, TDS, Salinity, or sensor. The temperature correction coefficient is adjustable from 0.00
Resistivity on the other. Channel one has a BNC connection for use to 10.00 %/°C.
with the expansive line of pH, ORP, and ISE electrodes that Hanna
Instruments offers. The meter is supplied with the HI1131B glass body, As a pH meter the HI5522 can be calibrated up to five points with a
double junction, combination pH electrode that operates over a wide choice of eight pre-programmed buffers or five custom buffers. The
temperature range from 0 to 100°C. All readings are automatically HI5522 features Hanna’s exclusive CAL Check™ to alert the user
compensated for temperature variations with the separate HI7662-T of potential problems during the pH calibration process. Indicators
temperature probe or from the built in temperature sensor of the displayed during calibration include “Electrode Dirty/Broken” and
conductivity probe on Channel Two. The HI5522 is supplied with the “Buffer Contaminated.” The overall probe condition based on the offset
7.4 | www.hannainst.com
7
and slope characteristic of the electrode is displayed as a percentage standards used, offset and cell factor can be accessed at any time
after calibration is complete. along with the current measurement by selecting the Good Laboratory
Practice (GLP) display option.
In ISE mode the HI5522 can be calibrated up to five points with a choice
of five fixed standards or five user defined in any concentration unit. For the measurement of high purity water used in pharmaceutical
The calibration data including date, time, standards used and slope can
manufacturing, the HI5522 is programmed with the three stages of the
be viewed at any time along with the current measurement by selecting
USP <645> method. Once a stage is met a report is generated and can be
the Good Laboratory Practice (GLP) display option.
saved. Up to 200 reports can be stored and transferred to a Windows®
Multiparameter
As an EC/TDS/Salinity/Resistivity meter the HI5522 can be calibrated compatible computer using the supplied USB cable and software.
up to four points with a choice of six pre-programmed conductivity
standards or user defined custom standards. Resistivity, TDS, Practical Three selectable logging modes are available: automatic, manual and
Salinity (PSU) and Natural Seawater Scale are calibrated through AutoHold logging. Up to 100,000 data points can be recorded in 100
conductivity. The % NaCl is calibrated to single point with the HI7037 lots with 50,000 records max/lot on each channel and exported to a
salinity standard. The calibration data including date, time, and computer for data review and storage.
benchtop
Indicators include “Electrode Dirty/Broken,” logs up to 100 lots with 50,000 records max/
Capacitive Touch “Buffer Contaminated,” electrode response lot, with up to 100,000 total data points.
The HI5522 features sensitive capacitive time and the overall probe condition as a Automatic logging features the option to
touch buttons for accurate keystrokes when percentage that is based on the offset and save data according to sampling period and
navigating menus and screens. There are slope characteristics. interval.
four dedicated keys that are used for routine
operations including calibration and switching GLP Data Data Transfer
measurement modes and four virtual keys
that change based upon use. The capacitive HI5522 includes a GLP Feature that allows Data can be transferred to a PC with USB cable
touch technology ensures the buttons never users to view calibration data and calibration and HI92000 software (both sold separately).
get clogged with sample residue. expiration information at the touch of a key.
Calibration data include date, time, standards Contextual Help
Four Ring Conductivity Probe used for calibration.
Contextual help is always available through a
All readings are performed with the HI76312 dedicated “HELP” key. Clear tutorial messages
four-ring conductivity probe that has a ISE Measurement with Choice of and directions are available on-screen to
built in temperature sensor for automatic Concentration Units quickly and easily guide users through
temperature correction. The four rings setup and calibration. The help information
are made with platinum and the body of The HI5522 allows for calibration and
displayed is relative to the setting/option
the electrode is made of Polyetherimide readings in choice of concentration units.
being viewed.
(PEI) plastic that is resistant to many harsh The choices of concentration units include
chemicals. The four-ring design allows for ppt, g/L, mg/mL, ppm, mg/L, μg/L, ppb, μg/L,
this probe to be used over a wide range of mg/mL, M, mol/L, mmol/L, %w/v and a user-
measurements. defined unit.
www.hannainst.com | 7.5
7
pH and EC Features
pH CAL Check™
Proper calibration of the pH electrode system is critical in order to achieve reliable results. Hanna’s exclusive CAL Check system includes several
features to help users reach that goal.
·· Each time a pH calibration is performed, the instrument compares the new calibration with the previous one. When this comparison
indicates a significant difference, the message alerts the user to either clean the electrode, check the buffer or both.
·· When measurements are taken too far from the calibration points, the instrument will warn the user with a message on the LCD.
·· The condition of the pH electrode after calibration is shown on the display, as well as the date and time.
Multiparameter
·· To avoid taking readings with old calibrations, the instrument automatically reminds the user when the calibration has expired.
benchtop
EC USP Mode
Hanna’s HI5522 and HI5521 together with EC probes can be used for conductivity measurements required to prepare water for injection (WFI)
according to USP <645>.
The instruments give clear instructions on how to perform each stage and automatically check that the temperature, conductivity
and stability are within USP limits.
Comprehensive results are shown on a single screen at the end of the test. Up to 200 reports can be saved for future recall.
7.6 | www.hannainst.com
7
ISE Features
Incremental methods involve adding a standard to a sample or sample to a standard and detecting the mV change that occurs due to the addition,
and this difference determines the concentration. Historically the user would use mathematical equations to determine the ion concentration of
the sample; the HI5522, sample concentrations are calculated automatically and then logged into an ISE method report; up to 200 reports can
be saved for future recall. The entire process can be repeated on multiple samples without reentering sets of parameters. Reports can be printed
using HI92000 PC software.
Multiparameter
Incremental method techniques can reduce errors from variables such as temperature, viscosity, pH or ionic strength. The electrodes remain
immersed throughout the process, thus reducing measurement time as well as eliminating sample carry over and its associated errors.
Known Addition, Known Subtraction, Analyte Addition, and Analyte Subtraction methods are standard method choices provided by the HI5522.
benchtop
First Step Sequence of Readings Results
The first step in performing an incremental Once the variables are entered, the The results are automatically calculated and
method analysis is to enter the required user is guided step-by-step through the shown together with all the parameters used.
parameters including sample, ISA and standard measurement process.
volumes, as well as standard concentration At this time, results can be saved into an
and stoichiometric factor. The initial mV measurement is made before ISE Methods Report and printed using the
the addition; next is the addition, followed by HI92000 PC software.
When repeating the analysis on another the second mV measurement.
sample, the parameters do not need to
be reentered.
• Low Profile
·· HI5522 features a low profile with
an ideal viewing angle
www.hannainst.com | 7.7
7
Additional Features by Screen
Multiparameter
Dual Channels
The two measurement channels of the HI5522 are galvanically isolated
to eliminate noise and instability.
7.8 | www.hannainst.com
Specifications HI5522
Range
Resolution
-2.0 to 20.0 pH; -2.00 to 20.00; -2.000 to 20.000 pH
0.1 pH; 0.01 pH; 0.001 pH
7
Accuracy ±0.1 pH; ±0.01 pH; ±0.002 pH ±1 LSD
pH
automatic, up to five-point calibration, eight standard buffers available (1.68, 3.00, 4.01, 6.86, 7.01, 9.18,
Calibration
10.01,12.45), and five custom buffers
Multiparameter
automatic, up to five-point calibration, five fixed standard solutions available for each measurement unit,
Calibration
and five user defined standards
0.000 to 9.999 µS/cm; 10.00 to 99.99 µS/cm; 100.0 to 999.9 µS/cm; 1.000 to 9.999 mS/cm;
Range
10.00 to 99.99 mS/cm; 100.0 to 1000.0 mS/cm absolute EC*
Resolution 0.001 µS/cm; 0.01 µS/cm; 0.1 µS/cm; 0.001 mS/cm; 0.01 mS/cm; 0.1 mS/cm
Accuracy ±1% of reading (±0.01 µS/cm)
Cell Constant 0.0500 to 200.00
Cell Type 4-pole cell
EC Calibration automatic standard recognition, user standard single point / multi-point calibration
Calibration Reminder yes
Temperature Coefficient 0.00 to 10.00 %/°C
Temperature Compensation disabled, linear and non-linear (natural water)
Reference Temperature 5.0 to 30.0°C
Profiles up to 10, 5 each channel
USP Compliant yes
0.000 to 9.999 ppm; 10.00 to 99.99 ppm; 100.0 to 999.9 ppm; 1.000 to 9.999 ppt; 10.00 to 99.99 ppt;
Range
100.0 to 400.0 ppt actual TDS* (with 1.00 factor)
TDS
Resolution 0.001 ppm; 0.01 ppm; 0.1 ppm; 0.001 ppt; 0.01 ppt; 0.1 ppt
Accuracy ±1% of reading (±0.01 ppm)
1.0 to 99.9 Ω•cm; 100 to 999 Ω•cm; 1.00 to 9.99 kΩ•cm; 10.0 to 99.9 kΩ•cm; 100 to 999 kΩ•cm;
Range
benchtop
1.00 to 9.99 MΩ•cm; 10.0 to 100.0 MΩ•cm
Resistivity
Resolution 0.1 Ω•cm; 1 Ω•cm; 0.01 kΩ•cm; 0.1 kΩ•cm; 1 kΩ•cm; 0.01 MΩ•cm; 0.1 MΩ•cm
Accuracy ±2% of reading (±1 Ω•cm)
Range practical scale: 0.00 to 42.00 psu; natural sea water scale: 0.00 to 80.00 ppt; percent scale: 0.0 to 400.0%
Resolution 0.01 for practical scale/natural sea water scale; 0.1% for percent scale
Salinity
Accuracy ±1% of reading
Calibration percent scale—one-point (with HI7037 standard); all others through EC
pH Electrode HI1131B glass body pH electrode with BNC connector and 1 m (3.3’) cable (included)
EC Probe HI76312 platinum, four-ring EC/TDS probe with and 1 m (3.3’) cable (included)
Temperature Probe HI7662-W stainless steel temperature probe with 1 m (3.3’) cable (included)
Input Channel(s) 1 pH/ORP/ISE + 1 EC
GLP cell constant, reference temperature/coefficient, calibration points, cal time stamp, probe offset for conductivity
Additional record : Up to 100 lots, 50,000 records max/lot / maximum 100,000 data points/channel;
Specifications Logging interval: 14 selectable between 1 second and 180 minutes; type: automatic, manual, AutoHOLD;
additional: 200 records USP; 200 records incremental methods
PC Connection USB
Power Supply 12 VDC adapter (included)
Environment 0 to 50°C (32 to 122°F; 273 to 323K) RH max 95% non-condensing
Dimensions / Weight 160 x 231 x 94 mm (6.3 x 9.1 x 3.7”) / 1.2 kg (2.64 lbs.)
HI5522-01 (115V) and HI5522-02 (230V) are supplied with HI1131B pH electrode, HI76312 EC/TDS probe, HI7662-W temperature probe,
Ordering pH 4.01 buffer solution sachet (2), pH 7.01 buffer solution sachet (2), pH 10.01 buffer solution sachet (2), 1413 µS/cm conductivity standard sachet
Information (2), 12880 µS/cm conductivity standard sachet (2), HI700601 electrode cleaning solution sachet (2), HI7082 3.5M KCl electrolyte solution (30 mL),
HI76404W electrode holder, 12 VDC adapter, capillary dropper pipette, quality certificate, quick start guide and instruction manual.
(*) Uncompensated conductivity (or TDS) is the conductivity (or TDS) value without temperature compensation.
(**) Reduced to actual probe limits
pH and ORP electrodes begin on page 2.122; pH and ORP solutions begin on page 2.142;
ISE electrodes and solutions begin on page 3.22; EC, TDS and salinity solutions begin on page 5.34 www.hannainst.com | 7.9
HI5521
The HI5521 is an advanced, two channel research grade benchtop HI5521 is supplied with the HI76312 four-ring conductivity probe
pH/ORP and EC/TDS/Salinity/Resistivity meter that is completely that operates over a wide range from 0.000 μS/cm to 1000.0 mS/
customizable with a large color LCD, capacitive touch keys, and USB cm*. The meter can be set to auto-ranging in which the meter chooses
port for computer connectivity. the appropriate conductivity range from seven ranges or fixed range
in which the meter will only display reading in μS/cm or mS/cm. All
The HI5521 allows for simultaneous measure of pH or ORP on one readings are automatically compensated for temperature variations
channel and EC or related parameters on the other. Channel one with a built in temperature sensor. The temperature correction
has a BNC connection for use with the expansive line of pH and ORP coefficient is adjustable from 0.00 to 10.00 %/°C.
electrodes that Hanna Instruments offers. The meter is supplied with
the HI1131B glass body, double junction, combination pH electrode As a pH meter the HI5521 can be calibrated up to five points with a
that operates over a wide temperature range from 0 to 100°C. All choice of eight pre-programmed buffers or five custom buffers. The
readings are automatically compensated for temperature variations HI5521 features Hanna’s exclusive CAL Check™ to alert the user
with the separate HI7662-T temperature probe or from the built in of potential problems during the pH calibration process. Indicators
temperature sensor of the conductivity probe on Channel two. The displayed during calibration include “Electrode Dirty/Broken” and
7.10 | www.hannainst.com
7
“Buffer Contaminated.” The overall probe condition based on the offset standards used, offset and cell factor can be accessed at any time
and slope characteristic of the electrode is displayed as a percentage along with the current measurement by selecting the Good Laboratory
after calibration is complete. The calibration data including date, time, Practice (GLP) display option.
buffers used, offset and slope can be accessed at any time along with
For the measurement of high purity water used in pharmaceutical
the current measurement by selecting the Good Laboratory Practice
manufacturing, the HI5521 is programmed with the three stages of
(GLP) display option.
the USP <645> method. Once a stage is met a report is generated and
can be saved. Up to 200 reports can be stored and with the USB port be
As an EC/TDS/Salinity/Resistivity meter the HI5521 can be calibrated
transferred to a Windows® compatible computer.
Multiparameter
up to four points with a choice of six pre-programmed conductivity
standards or user defined custom standards. Resistivity, TDS, Practical Three selectable logging modes are available: automatic, manual and
Salinity (PSU) and Natural Seawater Scale are calibrated through AutoHold logging. Up to 100,000 data points can be recorded in 100
conductivity. The % NaCl is calibrated to single point with the HI7037 lots with 50,000 records max/lot on each channel and exported to a
salinity standard. The calibration data including date, time, and computer for data review and storage.
benchtop
provide for an intuitive user interface. conductivity channel the calibration can be Data Transfer
set to automatic standard recognition or user
Data can be transferred to a PC with USB
entry along with a choice of single or multi-
Capacitive Touch cable and HI92000 software (both sold
point. Calibration can be performed up to four
separately).
The HI5521 features sensitive capacitive points when multi-point is selected.
touch buttons for accurate keystrokes when
CAL Check™ Contextual Help
navigating menus and screens. There are
four dedicated keys that are used for routine CAL Check alerts users to potential problems Contextual help is always available through a
during the calibration of the pH electrode. dedicated “HELP” key. Clear tutorial messages
operations including calibration and switching
Indicators include “Electrode Dirty/Broken,” and directions are available on-screen to
measurement modes and four virtual keys
“Buffer Contaminated,” electrode response quickly and easily guide users through
that change based upon use. The capacitive setup and calibration. The help information
time and the overall probe condition as a
touch technology ensures the buttons never percentage that is based on the offset and displayed is relative to the setting/option
get clogged with sample residue. slope characteristics. being viewed.
Dual Channels
The two measurement channels of the HI5521 are galvanically isolated
to eliminate noise and instability.
www.hannainst.com | 7.11
7
pH and EC Features
pH CAL Check™
Proper calibration of the pH electrode system is critical in order to achieve reliable results. Hanna’s exclusive CAL Check system includes several
features to help users reach that goal.
·· Each time a pH calibration is performed, the instrument compares the new calibration with the previous one. When this comparison
indicates a significant difference, the message alerts the user to either clean the electrode, check the buffer or both.
·· When measurements are taken too far from the calibration points, the instrument will warn the user with a message on the LCD.
·· The condition of the pH electrode after calibration is shown on the display, as well as the date and time.
Multiparameter
·· To avoid taking readings with old calibrations, the instrument automatically reminds the user when the calibration has expired.
benchtop
EC USP Mode
Hanna’s HI5522 and HI5521 together with EC probes can be used for conductivity measurements required to prepare water for injection (WFI)
according to USP <645>.
The instruments give clear instructions on how to perform each stage and automatically check that the temperature, conductivity
and stability are within USP limits.
Comprehensive results are shown on a single screen at the end of the test. Up to 200 reports can be saved for future recall.
7.12 | www.hannainst.com
7
Specifications HI5521
Range -2.0 to 20.0 pH; -2.00 to 20.00; -2.000 to 20.000 pH
Resolution 0.1 pH; 0.01 pH; 0.001 pH
Accuracy ±0.1 pH; ±0.01 pH; ±0.002 pH ±1 LSD
pH
automatic, up to five-point calibration, eight standard buffers available (1.68, 3.00, 4.01, 6.86, 7.01, 9.18,
Calibration
10.01,12.45), and five custom buffers
Multiparameter
Range ±2000 mV
mV Resolution 0.1 mV
Accuracy ±0.2 mV ±1 LSD
Range -20.0 to 120°C; -4.0 to 248.0°F; 253.15 to 393.15K
Temperature** Resolution 0.1°C; 0.1°F; 0.1K
Accuracy ±0.2°C ; ±0.4°F; ±0.2K (without probe)
0.000 to 9.999 µS/cm; 10.00 to 99.99 µS/cm; 100.0 to 999.9 µS/cm; 1.000 to 9.999 mS/cm;
Range
10.00 to 99.99 mS/cm; 100.0 to 1000.0 mS/cm absolute EC*
Resolution 0.001 µS/cm; 0.01 µS/cm; 0.1 µS/cm; 0.001 mS/cm; 0.01 mS/cm; 0.1 mS/cm
Accuracy ±1% of reading (±0.01 µS/cm)
Cell Constant 0.0500 to 200.00
Cell Type 4-pole cell
EC Calibration automatic standard recognition, user standard single point / multi-point calibration
Calibration Reminder yes
Temperature Coefficient 0.00 to 10.00 %/°C
Temperature Compensation disabled, linear and non-linear (natural water)
Reference Temperature 5.0 to 30.0°C
Profiles up to 10, 5 each channel
USP Compliant yes
0.000 to 9.999 ppm; 10.00 to 99.99 ppm; 100.0 to 999.9 ppm; 1.000 to 9.999 ppt; 10.00 to 99.99 ppt;
Range
100.0 to 400.0 ppt actual TDS* (with 1.00 factor)
TDS
Resolution 0.001 ppm; 0.01 ppm; 0.1 ppm; 0.001 ppt; 0.01 ppt; 0.1 ppt
Accuracy ±1% of reading (±0.01 ppm)
benchtop
1.0 to 99.9 Ω•cm; 100 to 999 Ω•cm; 1.00 to 9.99 kΩ•cm; 10.0 to 99.9 kΩ•cm; 100 to 999 kΩ•cm;
Range
1.00 to 9.99 MΩ•cm; 10.0 to 100.0 MΩ•cm
Resistivity
Resolution 0.1 Ω•cm; 1 Ω•cm; 0.01 kΩ•cm; 0.1 kΩ•cm; 1 kΩ•cm; 0.01 MΩ•cm; 0.1 MΩ•cm
Accuracy ±2% of reading (±1 Ω•cm)
Range practical scale: 0.00 to 42.00 psu; natural sea water scale: 0.00 to 80.00 ppt; percent scale: 0.0 to 400.0%
Resolution 0.01 for practical scale/natural sea water scale; 0.1% for percent scale
Salinity
Accuracy ±1% of reading
Calibration percent scale—one-point (with HI7037 standard); all others through EC
pH Electrode HI1131B glass body pH electrode with BNC connector and 1 m (3.3’) cable (included)
EC Probe HI76312 platinum, four-ring EC/TDS probe with and 1 m (3.3’) cable (included)
Temperature Probe HI7662-W stainless steel temperature probe with 1 m (3.3’) cable (included)
Input Channel(s) 1 pH/ORP + 1 EC
GLP cell constant, reference temperature/coefficient, calibration points, cal time stamp, probe offset for conductivity
Additional
Specifications record : Up to 100 lots, 50,000 records max/lot / maximum 100,000 data points/channel;
Logging
interval: 14 selectable between 1 second and 180 minutes; type: automatic, manual, AutoHOLD;
PC Connection USB
Power Supply 12 VDC adapter (included)
Environment 0 to 50°C (32 to 122°F; 273 to 323K) RH max 95% non-condensing
Dimensions / Weight 160 x 231 x 94 mm (6.3 x 9.1 x 3.7”) / 1.2 kg (2.64 lbs.)
HI5521-01 (115V) and HI5521-02 (230V) are supplied with HI1131B pH electrode, HI76312 EC/TDS probe, HI7662-W temperature probe,
Ordering pH 4.01 buffer solution sachet (2), pH 7.01 buffer solution sachet (4), pH 10.01 buffer solution sachet (2), HI700601 electrode cleaning solution
Information sachet (2), HI7082 3.5M KCl electrolyte solution (30 mL), HI76404W electrode holder, 12 VDC adapter, capillary dropper pipette,
quality certificate, quick start guide and instruction manual.
(*) Absolute conductivity (or TDS) is the conductivity (or TDS) value without temperature compensation.
(**) Reduced to actual probe limits
pH and ORP electrodes begin on page 2.122; pH and ORP solutions begin on page 2.142;
EC, TDS and salinity solutions begin on page 5.34 www.hannainst.com | 7.13
HI2550
7 Multiparameter Meter
pH/ORP/ISE and EC/TDS/Salinity
Multiparameter
benchtop
Dual-Channel, with Up to Seven Parameters calibration. The most suitable EC and TDS range for your application
is automatically selected. The HI2550 also includes the ability to set
HI2550 is a dual-channel instrument that measures up to seven
and lock the range manually.
parameters. With this single laboratory bench meter you can measure
pH, ORP or ISE, conductivity (EC), TDS or salinity, and temperature.
Good Laboratory Practice
Utilizing an external temperature probe, pH readings are automatically
This instrument provides GLP capabilities that allow for the storage
compensated for temperature. To ensure a higher level of precision,
and retrieval of all data regarding pH, ORP, EC and salinity calibration
pH calibrations can use up to five calibration points, chosen from the
and sample measurement as well as data regarding the maintenance
seven available memorized buffers.
and status of the electrode.
This instrument can take measurements using ORP electrodes (pH
channel input), due to its capability to measure mV with a resolution up Data Logging
to 0.1 mV, as well as ISE electrodes on the mV scale (pH channel input).
With a built-in logging function, measurements are stored in non-
EC measurements can be compensated relative to a selected reference volatile memory, and can be transferred to a PC through the USB
temperature. The EC calibration mode allows you to chose from among port. Users can manually log up to 200 records and interval log up
six recognized conductivity standards and perform a single-point to 500 records.
7.14 | www.hannainst.com
7
Specifications HI2550
Range -2.0 to 16.0 pH; -2.00 to 16.00 pH; -2.000 to 16.000 pH
pH**
up to five point calibration, seven standard buffers available (1.68, 4.01, 6.86, 7.01, 9.18, 10.01, 12.45),
Calibration
and two custom buffers
Multiparameter
ISE and ORP Resolution 0.1 mV (±1000.0 mV); 1 mV (± 2000 mV)
0.00 to 29.99 µS/cm; 30.0 to 299.9 µS/cm; 300 to 2999 µS/cm; 3.00 to 29.99 mS/cm; 30.0 to 200.0 mS/cm;
Range
up to 500.0 mS/cm actual* conductivity
Resolution 0.01 µS/cm; 0.1 µS/cm; 1 µS/cm; 0.01 mS/cm; 0.1 mS/cm
Temperature Coefficient 0.00 to 6.00 %/°C (for EC and TDS only; default value is 1.90 %/°C
0.00 to 14.99 ppm; 15.0 to 149.9 ppm; 150 to 1499 ppm; 1.50 to 14.99 g/L; 15.0 to 100.0 g/L;
Range
up to 400.0 g/L actual* TDS (with 0.80 factor)
TDS Resolution 0.01 ppm; 0.1 ppm; 1 ppm; 0.01 g/L; 0.1 g/L
benchtop
Range 0.0 to 400.0% NaCl
pH Electrode HI1131B glass body pH electrode with BNC connector and 1 m (3.3’) cable (included)
EC Probe HI76310 platinum four-ring EC/TDS probe and 1 m (3.3’) cable (included)
Weight 1.3 Kg (2.9 lb); kit with holder 2.1 Kg (4.6 lb.)
HI2550-01 (115V) and HI2550-02 (230V) are supplied with HI1131B pH electrode, HI76310 EC/TDS probe, HI7662 temperature probe,
Ordering
HI76404N electrode holder, HI70004 pH 4.01 buffer solution sachet, HI70007 pH 7.01 buffer solution sachet, HI7082 3.5M KCL electrolyte solution
Information (30 mL), 12 VDC adapter and instruction manual.
(*) Uncompensated conductivity (or TDS) is the conductivity (or TDS) value without temperature compensation.
(**) Reduced to actual sensor limits
pH and ORP electrodes begin on page 2.122; pH and ORP solutions begin on page 2.142;
ISE electrodes and solutions begin on page 3.22; EC, TDS and salinity solutions begin on page 5.34 www.hannainst.com | 7.15
HI9829
7 GPS Multiparam-
eter Meters
pH/ORP/ISE, EC/TDS/Resistivity/
Salinity/Seawater σ, Turbidity, DO,
Temperature and Atmospheric
Pressure
• Logging
·· Logging from probe or meter
• Fast Tracker
·· Tag Identification System
Multiparameter
• Sensor Check™
·· Auto-recognition of all sensors
• GLP features
·· Meets Good Laboratory Practices
• Connectivity
·· PC compatible via USB
• Help feature
·· On-screen user guides
• Backlight
·· Backlit, graphic LCD display
• Waterpoof
·· Waterproof casing
portable
7.16 | www.hannainst.com
Waterproof Protection Auto-sensor Recognition
The meter is enclosed in an IP67 rated
waterproof casing and can withstand
The probe and meter automatically recognize
the sensors that are connected. Any ports
7
immersion in water at a depth of 1 m for up not used on the probe will not have the
to 30 minutes. The probe features an IP68 parameter displayed or be configurable.
rating for continuous immersion in water.
Automatic Temperature
Compensation
Integrated temperature sensor allows for
Graphing Capability
automatic temperature compensation of Trend graphing with sample date and time
pH, conductivity, and dissolved oxygen stamp may be viewed on the display or
measurements. transferred to a PC.
Multiparameter
Automatic Barometric Pressure PC Connectivity
Backlit Dot Matrix LCD Display Compensation Logged data can be transferred to a Windows
compatible PC with the included HI7698291
The HI9829 features a backlit graphic LCD The meter features a built-in barometer with
USB adapter and HI929829 software.
with on-screen help and the capability user-selectable units for dissolved oxygen
to display up to twelve parameters pressure compensation.
simultaneously. The graphic display allows
Long Battery Life
for the use of virtual keys to provide for an The display of the meter has a battery icon
intuitive user interface. indicator to show the remaining power. The
meter is supplied with four 1.5V “C “ NiMH
Intuitive Keypad rechargeable batteries that provide up to 140
hours of battery life*
The fitted rubber keypad has dedicated keys
for power, backlight, up/down arrows, help * Without GPS or turbidity measurements
portable
Contextual help is always available through a
dedicated “HELP” key. Clear tutorial messages
and directions are available on-screen to
quickly and easily guide users through
setup and calibration. The help information
displayed is relative to the setting/option
being viewed.
GLP Data
HI9829 includes a GLP feature that allows
users to view calibration data and calibration
expiration information at the touch of a key.
Calibration data includes date, time, buffers/
standards used for calibration, and slope
characteristics. Rugged Custom Carrying Case
The HI9829 meter, probe, and all accessories
Data Logging are supplied in a rugged carrying case
The HI9829 allows users to store up to designed to provide years of use. The
44,000 continuous or log-on-demand inside compartment of the carrying case is
samples with logging intervals from one thermoformed to securely hold and protect
second to three hours. all of the components.
www.hannainst.com | 7.17
7
Probes sample data sets with date and time stamp thus permitting up to a
70 day deployment with all channels logging at 10 minute intervals.
portable
The HI76x9829 probes utilize field replaceable sensors with auto- The HI7609829-4 EC/turbidity sensor is field replaceable and offers
recognition. The sensors are housed with the probe electronics in a readings from both parameters at the same time.
rugged housing and a water-tight cable connection. The HI76909829
All potentiometric sensors feature a double junction design and
probe allows conductivity, pH/ORP (or an ISE), and dissolved oxygen
measurement. Other probe models allow turbidity and logging. are gel filled to increase resistance to contamination. One of the ISE
sensors can be used in place of the pH sensor and is automatically
Probes with the logging function have a logging memory that allows recognized. pH in mV readings are also displayed —which is useful for
storage of up to 140,000 individual samples or 35,000 complete troubleshooting.
7.18 | www.hannainst.com
7
Multiparameter
HI7609829
for pH/ORP, Dissolved
Oxygen, EC
HI7629829
for pH/ORP, Dissolved
Oxygen, EC, Logging
With two probes to choose from, these digital probes provide stable, noise-free sensor
signal management without the need for pre-amplified pH sensors.
Connector 3 EC EC
portable
Autonomous Logging — yes
Cable Specification multistrand-multiconductor shielded cable with internal strength member rated for 68 kg (150 lb.) intermittent use
Wetted Materials body: ABS; threads: nylon; shield: ABS/316 SS; temperature probe: 316 SS; O-rings: EPDM
Logging Probe
— 1.5V (4) AA alkaline
Internal Battery Type
all channels logging
Interval
(no averaging)
10 minutes 70 days
Dimensions (without cable) 342 mm (13.5”), dia=46 mm (1.8”) 442 mm (17.4”), dia 46 mm (1.8”)
www.hannainst.com | 7.19
7
Sensor Configurations
Both probes can accommodate a multitude of sensor configurations. The long sensor cap fits all configurations while the short sensor cap fits
configurations not requiring the turbidity/EC sensor.
Multiparameter
or
The dissolved oxygen in lakes, rivers, and The HI7609829-0 and -1 feature a double A choice of three ion selective electrodes
oceans is crucial for the organisms and junction design and are gel filled to increase (ISE) is available for constant reporting
creatures living in it. If dissolved oxygen resistance to contamination. These pH or of common surface water contaminants.
concentrations drop below normal levels in pH/ORP sensors incorporate the technology Nitrate, ammonium and chloride ISEs are
water bodies, the water quality degrades that has made Hanna so successful as a pH available. Each ISE is a combination electrode
and the organisms begin to die off. The manufacturer. Reliable pH measurements are incorporating an extremely constant
HI7609829-2 galvanic DO sensor does not one of the most important indicators of water reference spiral; all potentionmetric probes
require long polarization times so is ready chemistry indicating the relative amount of feature a double junction and solid gel
for measurement at a moment’s notice. This free hydrogen and hydroxyl ions in the water. reference design. The HI9829 displays
sensor also utilizes a replaceable cap design Hanna’s pH sensors utilize a resilient PEI measurements of ion activity as ppm
for ease of maintenance and a safe, non-toxic body to protect them from solid particulates ammonium-nitrogen, ppm chloride, and ppm
electrolyte. DO readings are compensated found in water samples. Consistency and nitrate-nitrogen.
portable
for the effects of temperature (using the quality are the hallmarks of these sensors.
probe’s built-in temperature sensor) and Our differential measurement system further
atmospheric pressure (using the HI 9829’s enhances the measurement reliability,
internal atmospheric pressure sensor). The providing temperature corrected pH.
DO measurement complies with standard
methods 4500-0 G and EPA article 360.1.
HI7698295
Short cap for probes without
EC/turbidity sensor
7.20 | www.hannainst.com
7
Multiparameter
or
portable
and inorganic matter, soluble colored organic
compounds, plankton and microscopic
organisms. Conductivity measurement is the
same as in the HI7609829-3.
HI7698296
Long cap for probes with
EC/turbidity sensor
www.hannainst.com | 7.21
7
Features
• Basic GPS Features
·· GPS coordinates shown on the LCD with
up to 10 measurement parameters
·· GPS signal strength shown on LCD
·· Logged data is embedded with GPS coordinates
·· GPS status screen
• Advanced GPS Features
·· Users can associate GPS coordinates
with alphanumeric locations
·· Distances between current location and predefined
locations are displayed arranged by distance
portable
7.22 | www.hannainst.com
7
GPS Screen Features
Multiparameter
• GPS data can be customized to
meet specific requirement
portable
• Display current readings along
with GPS coordinates
*Google™ is a registered trademark of Google™, inc. HANNA Instruments® has no affiliation with Google™.
www.hannainst.com | 7.23
Specifications HI9829 HI9829 with GPS
7 Temperature
Compensation
automatic from -5 to 55°C (23 to 131°F) automatic from -5 to 55°C (23 to 131°F)
Logging Memory
44,000 records 44,000 records
from Meter
Computer Interface USB (with HI 929829 software) USB (with HI929829 software)
1.5V alkaline C cells (4) / 1.2V NiMH rechargeable C cells (4), 1.5V alkaline C cells (4) / 1.2V NiMH rechargeable C cells (4),
Power Supply
USB, 12V power adapter USB, 12V power adapter
Multiparameter
Dimensions 221 x 115 x 55 mm (8.7 x 4.5 x 2.2”) 221 x 115 x 55 mm (8.7 x 4.5 x 2.2”)
0.001 mS/cm from 0.000 to 9.999 mS/cm; 0.001 g/L (ppt) from 0.000 to 9.999 g/L (ppt);
0.01 mS/cm from 10.00 to 99.99 mS/cm; 0.01 g/L (ppt) from 10.00 to 99.99 g/L (ppt);
0.1 mS/cm from 100.0 to 400.0 mS/cm 0.1 g/L (ppt) from 100.0 to 400.0 g/L (ppt)
±2% of reading
±1% of reading or ±1 µS/cm, ±1% of reading or ±1 mg/L, or ±0.01 PSU,
Accuracy — ±1 σt, σ0, σ15
whichever is greater whichever is greater whichever is
greater
automatic one point with six memorized
standards (84 µS/cm, 1413 µS/cm, 5.00 one custom based on conductivity or
Calibration based on conductivity or salinity calibration
mS/cm, 12.88 mS/cm, 80.0 mS/cm, 111.8 point salinity calibration
mS/cm) or custom point
Multiparameter
1 115V
Z=
2 230V
portable
HI9829-0110Z HI7609829/10 • • • • • •
HI710045 Power supply cable
HI9829-0120Z HI7609829/20 • • • • • •
HI710046 Cigarette lighter cable
HI9829-0204Z HI7629829/4 • • • •
HI7609829-1 pH/ORP sensor
HI7609829-2 Galvanic DO Sensor HI9829-0210Z HI7629829/10 • • • •
HI9829-0320Z HI7629829/20 • • • • • • •
Spare Solution
HI9829-1004Z HI7609829/4 • • •
HI9829-10 25 sachets 10ppm ammonia-nitrogen calibration solution HI9829-1010Z HI7609829/10 • • •
10 sachets each of 10ppm and 100ppm ammonia-nitrogen HI9829-1020Z HI7609829/20 • • •
HI9829-10/11
calibration solution
HI9829-1104Z HI7609829/4 • • • • • •
HI9829-11 25 sachets 100ppm ammonia-nitrogen calibration solution
HI9829-1110Z HI7609829/10 • • • • • •
HI9829-12 25 sachets 10ppm chloride calibration solution
HI9829-1120Z HI7609829/20 • • • • • •
10 sachets each of 10ppm and 100ppm chloride calibration
HI9829-12/13 HI9829-1204Z HI7629829/4 • • • •
solution
HI9829-1210Z HI7629829/10 • • • •
HI9829-13 25 sachets 100ppm chloride calibration solution
HI9829-1220Z HI7629829/20 • • • •
HI9829-14 25 sachets 10ppm nitrate-nitrogen calibration solution
HI9829-1304Z HI7629829/4 • • • • • • •
10 sachets each of 10ppm and 100ppm nitrate-nitrogen
HI9829-14/15
calibration solution HI9829-1310Z HI7629829/10 • • • • • • •
HI9829 meter, HI7609829/10 probe, HI7698291 USB cable (PC to meter), HI920005 iButton® with holder (5 pcs),
Multiparameter
HI929829 PC application software, HI7609829-3 EC sensor, HI7609829-2 DO sensor, HI7609829-1 pH/ORP sensor,
Basic HI9829-00101 (115V)
HI710045 power supply cable, HI7698292 probe maintenance kit, HI7698290 short calibration beaker,
HI9829-00102 (230V)
HI9828-25 calibration solution (500 mL), HI710046 cigarette lighter cable, HI710005/8 (115V) or HI710006/8 (230V),
instruction manual.
HI9829 meter, HI7609829/20 probe, HI7698291 USB cable (PC to meter), HI920005 iButton® with holder (5 pcs),
HI929829 PC application software, HI7609829-3 EC sensor, HI7609829-2 DO sensor, HI7609829-1 pH/ORP sensor,
HI9829-00201 (115V)
HI710045 power supply cable, HI7698292 probe maintenance kit, HI7698290 short calibration beaker,
HI9829-00202 (230V)
HI9828-25 calibration solution (500 mL), HI710046 cigarette lighter cable, HI710005/8 (115V) or HI710006/8 (230V),
instruction manual.
HI9829 meter with GPS, HI7609829/4 probe, HI7698291 USB cable (PC to meter), HI920005 iButton® with holder
(5 pcs), HI929829 PC application software, HI7609829-3 EC sensor, HI7609829-2 DO sensor, HI7609829-1 pH/ORP
HI9829-10041 (115V)
sensor, HI710045 power supply cable, HI7698292 probe maintenance kit, HI7698290 short calibration beaker,
HI9829-10042 (230V)
HI9828-25 calibration solution (500 mL), HI710046 cigarette lighter cable, HI710005/8 (115V) or HI710006/8 (230V),
instruction manual.
HI9829 meter with GPS, HI7609829/10 probe, HI7698291 USB cable (PC to meter), HI920005 iButton® with holder
(5 pcs), HI929829 PC application software, HI7609829-3 EC sensor, HI7609829-2 DO sensor, HI7609829-1 pH/ORP
HI9829-10101 (115V)
GPS sensor, HI710045 power supply cable, HI7698292 probe maintenance kit, HI7698290 short calibration beaker,
HI9829-10102 (230V)
HI9828-25 calibration solution (500 mL), HI710046 cigarette lighter cable, HI710005/8 (115V) or HI710006/8 (230V),
instruction manual.
HI9829 meter with GPS, HI7609829/20 probe, HI7698291 USB cable (PC to meter), HI920005 iButton® with holder
(5 pcs), HI929829 PC application software, HI7609829-3 EC sensor, HI7609829-2 DO sensor, HI7609829-1 pH/ORP
HI9829-10201 (115V)
sensor, HI710045 power supply cable, HI7698292 probe maintenance kit, HI7698290 short calibration beaker,
HI9829-10202 (230V)
HI9828-25 calibration solution (500 mL), HI710046 cigarette lighter cable, HI710005/8 (115V) or HI710006/8 (230V),
instruction manual.
HI9829 meter, HI7609829/4 probe, HI7698291 USB cable (PC to meter), HI920005 iButton® with holder (5 pcs),
HI929829 PC application software, HI7609829-2 DO sensor, HI7609829-1 pH/ORP sensor, HI7609829-4 EC/Turbidity
HI9829-01041 (115V) sensor, HI710045 power supply cable, HI7698292 probe maintenance kit, HI9829-16 0 FNU calibration solution (230
HI9829-01042 (230V) mL), HI9829-17 20 FNU calibration solution (230 mL), HI9829-18 200 FNU calibration solution (230 mL), HI7698293
long calibration beaker, HI9828-25 calibration solution (500 mL), HI710046 cigarette lighter cable, HI710005/8 (115V)
or HI710006/8 (230V), instruction manual.
HI9829 meter, HI7609829/10 probe, HI7698291 USB cable (PC to meter), HI920005 iButton® with holder (5 pcs),
portable
HI929829 PC application software, HI7609829-2 DO sensor, HI7609829-1 pH/ORP sensor, HI7609829-4 EC/Turbidity
HI9829-01101 (115V) sensor, HI710045 power supply cable,HI7698292 probe maintenance kit, HI9829-16 0 FNU calibration solution (230
Basic & Turbidity
HI9829-01102 (230V) mL), HI9829-17 20 FNU calibration solution (230 mL), HI9829-18 200 FNU calibration solution (230 mL), HI7698293
long calibration beaker, HI9828-25 calibration solution (500 mL), HI710046 cigarette lighter cable, HI710005/8 (115V)
or HI710006/8 (230V), instruction manual.
HI9829 meter, HI7609829/20 probe, HI7698291 USB cable (PC to meter), HI920005 iButton® with holder (5 pcs),
HI929829 PC application software, HI7609829-2 DO sensor, HI7609829-1 pH/ORP sensor, HI7609829-4 EC/Turbidity
HI9829-01201 (115V) sensor, HI710045 power supply cable,HI7698292 probe maintenance kit, HI9829-16 0 FNU calibration solution (230
HI9829-01202 (230V) mL), HI9829-17 20 FNU calibration solution (230 mL), HI9829-18 200 FNU calibration solution (230 mL), HI7698293
long calibration beaker, HI9828-25 calibration solution (500 mL), HI710046 cigarette lighter cable, HI710005/8 (115V)
or HI710006/8 (230V), instruction manual.
HI9829 meter with GPS, HI7609829/4 probe, HI7698291 USB cable (PC to meter), HI920005 iButton® with holder
(5 pcs), HI929829 PC application software, HI7609829-2 DO sensor, HI7609829-1 pH/ORP sensor, HI7609829-4
HI9829-11041 (115V) EC/Turbidity sensor, HI710045 power supply cable, HI7698292 probe maintenance kit, HI9829-16 0 FNU calibration
HI9829-11042 (230V) solution (230 mL), HI9829-17 20 FNU calibration solution (230 mL), HI9829-18 200 FNU calibration solution
(230 mL), HI7698293 long calibration beaker, HI9828-25 calibration solution (500 mL), HI710046 cigarette lighter
cable, HI710005/8 (115V) or HI710006/8 (230V), instruction manual.
HI9829 meter with GPS, HI7609829/10 probe, HI7698291 USB cable (PC to meter), HI920005 iButton® with holder
(5 pcs), HI929829 PC application software, HI7609829-2 DO sensor, HI7609829-1 pH/ORP sensor, HI7609829-4
HI9829-11101 (115V) EC/Turbidity sensor, HI710045 power supply cable, HI7698292 probe maintenance kit, HI9829-16 0 FNU calibration
GPS & Turbidity
HI9829-11102 (230V) solution (230 mL), HI9829-17 20 FNU calibration solution (230 mL), HI9829-18 200 FNU calibration solution
(230 mL), HI7698293 long calibration beaker, HI9828-25 calibration solution (500 mL), HI710046 cigarette lighter
cable, HI710005/8 (115V) or HI710006/8 (230V), instruction manual.
HI9829 meter with GPS, HI7609829/20 probe, HI7698291 USB cable (PC to meter), HI920005 iButton® with holder
(5 pcs), HI929829 PC application software, HI7609829-2 DO sensor, HI7609829-1 pH/ORP sensor, HI7609829-4
HI9829-11201 (115V) EC/Turbidity sensor, HI710045 power supply cable, HI7698292 probe maintenance kit, HI9829-16 0 FNU calibration
HI9829-11202 (230V) solution (230 mL), HI9829-17 20 FNU calibration solution (230 mL), HI9829-18 200 FNU calibration solution
(230 mL), HI7698293 long calibration beaker, HI9828-25 calibration solution (500 mL), HI710046 cigarette lighter
cable, HI710005/8 (115V) or HI710006/8 (230V), instruction manual.
HI9829 meter, HI7629829/10 probe, HI76982910 USB cable (PC to Probe), HI7698291 USB cable (PC to meter),
Basic with
HI9829-02101 (115V) HI929829 PC application software, HI920005 iButton® with holder (5 pcs), HI7609829-3 EC sensor, HI7609829-2 DO
Multiparameter
Autonomously
HI9829-02102 (230V) sensor, HI7609829-1 pH/ORP sensor, HI710045 power supply cable, HI7698290 short calibration beaker, HI9828-25
Logging Probe
calibration solution (500 mL), HI710005/8 (115V) or HI710006/8 (230V), instruction manual.
HI9829 meter, HI7629829/20 probe, HI76982910 USB cable (PC to Probe), HI7698291 USB cable (PC to meter),
HI9829-02201 (115V) HI929829 PC application software, HI920005 iButton® with holder (5 pcs), HI7609829-3 EC sensor, HI7609829-2 DO
HI9829-02202 (230V) sensor, HI7609829-1 pH/ORP sensor, HI710045 power supply cable, HI7698290 short calibration beaker, HI9828-25
calibration solution (500 mL), HI710005/8 (115V) or HI710006/8 (230V), instruction manual.
HI9829 meter with GPS, HI7629829/4 probe, HI76982910 USB cable, (PC to Probe), HI7698291 USB cable (PC to
HI9829-12041 (115V) meter), HI929829 PC application software, HI920005 iButton® with holder (5 pcs), HI7609829-3 EC sensor,
HI9829-12042 (230V) HI7609829-2 DO sensor, HI7609829-1 pH/ORP sensor, HI710045 power supply cable, HI7698290 short calibration
beaker, HI9828-25 calibration solution (500 mL), HI710005/8 (115V) or HI710006/8 (230V), instruction manual.
HI9829 meter with GPS, HI7629829/10 probe, HI76982910 USB cable (PC to Probe), HI7698291 USB cable (PC
GPS with
HI9829-12101 (115V) to meter), HI929829 PC application software, HI920005 iButton® with holder (5 pcs), HI7609829-3 EC sensor,
Autonomously
Logging Probe HI9829-12102 (230V) HI7609829-2 DO sensor, HI7609829-1 pH/ORP sensor, HI710045 power supply cable, HI7698290 short calibration
beaker, HI9828-25 calibration solution (500 mL), HI710005/8 (115V) or HI710006/8 (230V), instruction manual.
HI9829 meter with GPS, HI7629829/20 probe, HI76982910 USB cable (PC to Probe), HI7698291 USB cable (PC to
HI9829-12201 (115V) meter), HI929829 PC application software, HI920005 iButton® with holder (5 pcs), HI7609829-3 EC sensor,
HI9829-12202 (230V) HI7609829-2 DO sensor, HI7609829-1 pH/ORP sensor, HI710045 power supply cable, HI7698290 short calibration
beaker, HI9828-25 calibration solution (500 mL), HI710005/8 (115V) or HI710006/8 (230V), instruction manual.
HI9829 meter, HI7629829/4 probe, HI76982910 USB cable (PC to Probe), HI7698291 USB cable (PC to meter),
HI929829 PC application software, HI920005 iButton® with holder (5 pcs), HI7609829-2 DO sensor, HI7609829-1
HI9829-03041 (115V) pH/ORP sensor, HI7609829-4 EC/Turbidity sensor, HI710045 power supply cable, HI7698292 probe maintenance kit,
HI9829-03042 (230V) HI9829-16 0 FNU calibration solution (230 mL), HI9829-17 20 FNU calibration solution (230 mL), HI9829-18 200 FNU
calibration solution (230 mL), HI7698293 long calibration beaker, HI9828-25 calibration solution (500 mL), HI710046
cigarette lighter cable, HI710005/8 (115V) or HI710006/8 (230V), instruction manual.
HI9829 meter, HI7629829/10 probe, HI76982910 USB cable (PC to Probe), HI7698291 USB cable (PC to meter),
Basic with HI929829 PC application software, HI920005 iButton® with holder (5 pcs), HI7609829-2 DO sensor, HI7609829-1
Autonomously HI9829-03101 (115V) pH/ORP sensor, HI7609829-4 EC/Turbidity sensor, HI710045 power supply cable, HI7698292 probe maintenance kit,
portable
Logging Probe HI9829-03102 (230V) HI9829-16 0 FNU calibration solution (230 mL), HI9829-17 20 FNU calibration solution (230 mL), HI9829-18 200 FNU
& Turbidity
calibration solution (230 mL), HI7698293 long calibration beaker, HI9828-25 calibration solution (500 mL), HI710046
cigarette lighter cable, HI710005/8 (115V) or HI710006/8 (230V), instruction manual.
HI9829 meter, HI7629829/20 probe, HI76982910 USB cable (PC to Probe), HI7698291 USB cable (PC to meter),
HI929829 PC application software, HI920005 iButton® with holder (5 pcs), HI7609829-2 DO sensor, HI7609829-1
HI9829-03201 (115V) pH/ORP sensor, HI7609829-4 EC/Turbidity sensor, HI710045 power supply cable, HI7698292 probe maintenance kit,
HI9829-03202 (230V) HI9829-16 0 FNU calibration solution (230 mL), HI9829-17 20 FNU calibration solution (230 mL), HI9829-18 200 FNU
calibration solution (230 mL), HI7698293 long calibration beaker, HI9828-25 calibration solution (500 mL), HI710046
cigarette lighter cable, HI710005/8 (115V) or HI710006/98(230V), instruction manual.
HI9829 meter with GPS, HI7629829/4 probe,HI76982910 USB cable, (PC to Probe), HI7698291 USB cable (PC to meter),
HI929829 PC application software, HI920005 iButton® with holder (5 pcs), HI7609829-2 DO sensor,
HI9829-13041 (115V) HI7609829-1 pH/ORP sensor, HI7609829-4 EC/Turbidity sensor, HI710045 power supply cable, HI7698292 probe
HI9829-13042 (230V) maintenance kit, HI9829-16 0 FNU calibration solution (230 mL), HI9829-17 20 FNU calibration solution (230 mL),
HI9829-18 200 FNU calibration solution (230 mL), HI7698293 long calibration beaker, HI9828-25 calibration solution
(500 mL), HI710046 cigarette lighter cable, HI710005/8 (115V) or HI710006/8 (230V), instruction manual.
HI9829 meter with GPS, HI7629829/10 probe,HI76982910 USB cable (PC to Probe), HI7698291 USB cable (PC to
GPS with meter), HI929829 PC application software, HI920005 iButton® with holder (5 pcs), HI7609829-2 DO sensor,
Autonomously HI9829-13101 (115V) HI7609829-1 pH/ORP sensor, HI7609829-4 EC/Turbidity sensor, HI710045 power supply cable,HI7698292 probe
Logging Probe HI9829-13102 (230V) maintenance kit, HI9829-16 0 FNU calibration solution (230 mL), HI9829-17 20 FNU calibration solution (230 mL),
& Turbidity HI9829-18 200 FNU calibration solution (230 mL), HI7698293 long calibration beaker, HI9828-25 calibration solution
(500 mL), HI710046 cigarette lighter cable, HI710005/8 (115V) or HI710006/8 (230V),instruction manual.
HI9829 meter with GPS, HI7629829/20 probe,HI76982910 USB cable (PC to Probe), HI7698291 USB cable (PC to
meter), HI929829 PC application software, HI920005 iButton® with holder (5 pcs), HI7609829-2 DO sensor,
HI9829-13201 (115V) HI7609829-1 pH/ORP sensor, HI7609829-4 EC/Turbidity sensor, HI710045 power supply cable, HI7698292 probe
HI9829-13202 (230V) maintenance kit, HI9829-16 0 FNU calibration solution (230 mL), HI9829-17 20 FNU calibration solution (230 mL),
HI9829-18 200 FNU calibration solution (230 mL), HI7698293 long calibration beaker, HI9828-25 calibration solution
(500 mL), HI710046 cigarette lighter cable, HI710005/8 (115V) or HI710006/8 (230V), instruction manual.
HI7609829-3 EC
HI7609829-4 EC/Turbidity
pH Calibration Solutions
portable
EC Calibration Solutions
HI7030L 12880 µS/cm cal. sol., 500 mL
7.28 | www.hannainst.com
Solutions & Accessories Ordering Information 7
ISE Standards
Multiparameter
HI76982910
Kit containing 10 sachets each of 10 ppm and 100 ppm standard USB cable, PC to probe
HI9829-10/11
for HI7609829-10 ammonium ISE
portable
pH/ORP Cleaning and Storage Solutions
HI70300L pH/ORP electrode storage sol., 500 mL
Accessories
HI929829 PC application software
www.hannainst.com | 7.29
HI98194
7 Multiparameter
Waterproof Meter
pH, ORP, EC, TDS, Resistivity, Salinity,
Seawater σ, Dissolved Oxygen,
Atmospheric Pressure and Temperature
pH Features
• Calibration
·· Up to a three-point calibration
with five standard buffers and
Multiparameter
• Polarization
·· Automatic polarization of probe at startup
• Membrane caps
·· Ready-to-use HDPE pre-tensioned
membrane caps are easy to replace
EC/TDS/Resistivity Features
• Calibration
·· Single-point calibration from six standards
• Temperature compensation
·· Automatic Temperature Compensation
·· Configurable temperature coefficient
range from 0.00 to 6.00%/°C
·· Choice of reference
temperatures at 20 or 25°C
·· Absolute conductivity can The HI98194 is a waterproof portable logging
be displayed along with the multiparameter meter that monitors up to 12 different
temperature compensated value water quality parameters. It’s multi-sensor probe allows
for the measurement of key parameters including pH,
• Auto-ranging
ORP, conductivity, dissolved oxygen, and temperature.
• Salinity readings The probe transmits readings digitally to the meter, where
·· Practical Salinity Scale (PSU) based data points can be displayed and logged. The complete
on conductivity calibration system is simple to setup and easy to use.
7.30 | www.hannainst.com
Backlit Graphic LCD Display Auto-sensor Recognition
The HI98194 features a backlit graphic The probe and meter automatically recognize
the sensors that are connected. Any ports
7
LCD with on-screen help and the capability
to display up to twelve parameters not used on the probe will not have the
simultaneously. The graphic display allows parameter displayed or be configurable.
for the use of virtual keys to provide for an
intuitive user interface. Automatic Temperature
Compensation
Waterproof Protection
Integrated temperature sensor allows for Dedicated Help Key
The meter is enclosed in an IP67 rated automatic temperature compensation of Contextual help is always available through a
waterproof casing and can withstand pH, conductivity, and dissolved oxygen dedicated “HELP” key. Clear tutorial messages
immersion in water at a depth of 1 m for up measurements. and directions are available on-screen to
to 30 minutes. The probe features an IP68
Multiparameter
quickly and easily guide users through
rating for continuous immersion in water.
Automatic Barometric Pressure setup and calibration. The help information
displayed is relative to the setting/option
Compensation
being viewed.
The meter features a built-in barometer with
user-selectable units for dissolved oxygen PC Connectivity
pressure compensation.
Logged data can be transferred to a Window’s
compatible PC with the included HI920015
micro USB cable and HI9298194 software.
portable
identification.
Data Logging
The HI98194 allows users to store up to
45,000 continuous or log-on-demand
Standard or Quick Calibration samples with logging intervals from one
second to three hours.
Quick Calibration provides a speedy, single-
point calibration for pH, conductivity, and
Intuitive Keypad
dissolved oxygen. Standard pH calibration
options are available for calibrating up to The fitted rubber keypad has dedicated keys Rugged Custom Carrying Case
for power, backlight, up/down arrows, help
three points from a selection of five standard The HI98194 meter, probe, and all
and alphanumeric characters. The meter also
buffers and one custom buffer. Conductivity accessories are supplied in a rugged carrying
features two virtual soft keys that navigate
calibration is a single point from six standard the user through the configuration of each case designed to provide years of use. The
selections or one custom standard. Dissolved parameter, meter setup, and logging of data. inside compartment of the carrying case is
oxygen calibration is up to two standard The interface is intuitive for any user’s level thermoformed to securely hold and protect
points or a single custom point. of experience. all of the components.
www.hannainst.com | 7.31
Probe and Sensors
7 The HI7698194 is a multiparameter pH/EC/DO/Temperature probe for use with the HI98194
portable meter. It features a Quick Connect DIN that makes a waterproof connection with the
meter. Sensors are automatically recognized by the probe and meter when connected. Any ports
not used on the probe will not have the parameter displayed on the meter. Sensor replacement
is quick and easy with field replaceable, screw type connectors that are color coded for easy
sensor identification. The probe features a multistrand-multiconductor shielded cable with 4m,
10m, 20m, and 40m lengths available. It’s rugged, waterproof design makes it ideal for field use.
Cable Specification
multistrand-multiconductor shielded cable with internal strength Multi-function Sensor
member rated for 68 kg (150 lb.) intermittent use
• Quick sensor replacement
Body ABS
·· Sensor replacement is quick and easy
Threads Nylon with field replaceable, screw type
Wetted Materials Shield ABS / 316 SS connectors and are color coded for
Temperature Probe 316 SS easy identification. These meters
automatically recognize sensors.
O-rings EPDM
HI9828-25
Quick Calibration
solution
or
portable
DO (% saturation and
Measurement Type pH, mV (pH) pH, mV (pH), ORP EC
concentration)
0.00 to 13.00 pH; ±600.0 mV; 0.0 to 200.0 mS/cm; 0.0 to 500.0 %;
Measurement Range 0.00 to 13.00 pH ; ±600.0 mV
±2000.0 mV 0.0 to 400 mS/cm (absolute) 0.00 to 50.00 mg/L
Maintenance Solution HI70300 (storage solution) HI70300 (storage solution) none HI7042S (DO electrolyte)
7.32 | www.hannainst.com
Specifications HI98194
Range
Resolution
0.00 to 14.00 pH / ±600.0 mV
0.01 pH / 0.1 mV
7
pH / mV Accuracy ±0.02 pH / ±0.5 mV
automatic one, two, or three points with automatic recognition of five standard buffers
Calibration
(pH 4.01, 6.86, 7.01, 9.18, 10.01) or one custom buffer
Range ±2000.0 mV
Resolution 0.1 mV
ORP
Accuracy ±1.0 mV
manual: 1 µS/cm; 0.001 mS/cm; 0.01 mS/cm; 0.1 mS/cm; 1 mS/cm; automatic: 1 µS/cm from 0 to 9999 µS/cm; 0.01 mS/cm from
Resolution 10.00 to 99.99 mS/cm; 0.1 mS/cm from 100.0 to 400.0 mS/cm; automatic mS/cm: 0.001 mS/cm from 0.000 to 9.999 mS/cm;
Multiparameter
EC 0.01 mS/cm from 10.00 to 99.99 mS/cm; 0.1 mS/cm from 100.0 to 400.0 mS/cm
automatic single point, with six standard solutions (84 µS/cm, 1413 µS/cm,
Calibration
5.00 mS/cm, 12.88 mS/cm, 80.0 mS/cm, 111.8 mS/cm) or custom point
Range 0.0 to 400.0 ppt (g/L) (the maximum value depends on the TDS factor)
manual: 1 ppm (mg/L); 0.001 ppt (g/L); 0.01 ppt (g/L); 0.1 ppt (g/L); 1 ppt (g/L); automatic: 1 ppm (mg/L) from 0 to 9999 ppm (mg/L);
Resolution 0.01 ppt (g/L) from 10.00 to 99.99 ppt (g/L); 0.1 ppt (g/L) from 100.0 to 400.0 ppt (g/L); automatic ppt (g/L): 0.001 ppt (g/L)
TDS from 0.000 to 9.999 ppt (g/L); 0.01 ppt (g/L) from 10.00 to 99.99 ppt (g/L); 0.1 ppt (g/L) from 100.0 to 400.0 ppt (g/L)
portable
Oxygen 0.0 to 300.0%: ±1.5% of reading or ±1.0% whichever is greater; 300.0 to 500.0%: ±3% of reading; 0.00 to 30.00 ppm
Accuracy
(mg/L): ±1.5% of reading or ±0.10 ppm (mg/L), whichever is greater; 30.00 ppm (mg/L) to 50.00 ppm (mg/L): ±3% of reading
Range 450 to 850 mm Hg; 17.72 to 33.46 in Hg; 600.0 to 1133.2 mbar; 8.702 to 16.436 psi; 0.5921 to 1.1184 atm; 60.00 to 113.32 kPa
Atmospheric Resolution 0.1 mm Hg; 0.01 in Hg; 0.1 mbar; 0.001 psi; 0.0001 atm; 0.01 kPa
Pressure Accuracy ±3 mm Hg within ±15°C from the temperature during calibration
Temperature
automatic from -5 to 55°C (23 to 131°F)
Compensation
Battery Type / Life 1.5V AA batteries (4) / approximately 360 hours of continuous use without backlight (50 hours with backlight)
Dimensions / Weight 185 x 93 x 35.2 mm (7.3 x 3.6 x 1.4”) / 400 g (14.2 oz.)
HI98194 is supplied with HI7698194/4 multiparameter probe, HI7698194-1 pH/ORP sensor, HI7698194-3 EC sensor, HI7698194-2 DO sensor,
Ordering
HI9828-20 quick calibration solution, HI76981942 probe maintenance kit, HI76981943 calibration beaker, HI9298194 PC software, HI920015 micro
Information USB cable, batteries (4), quality certificate, and instruction manual in a rugged carrying case with custom insert.
pH and ORP solutions begin on page 2.142; EC, TDS and salinity solutions begin on page 5.34;
for DO accessories see HI7042S, HI7040L and HI76409A/P page 6.26 www.hannainst.com | 7.33
HI98195
7 Multiparameter
Waterproof Meter
pH, ORP, EC, TDS, Resistivity, Salinity,
Seawater σ and Temperature
pH Features
• Calibration
·· Up to a three-point calibration
with five standard buffers and
Multiparameter
EC/TDS/Resistivity Features
• Calibration
·· Single-point calibration
from six standards
• Temperature compensation
·· Automatic Temperature Compensation
·· Configurable temperature coefficient
range from 0.00 to 6.00%/°C
·· Choice of reference
temperatures at 20 or 25°C
·· Absolute conductivity can
portable
7.34 | www.hannainst.com
Backlit Graphic LCD Display Automatic Temperature
The HI98195 features a backlit graphic LCD
with on-screen help and the capability to
Compensation 7
display up to nine parameters simultaneously. Integrated temperature sensor allows for
The graphic display allows for the use of virtual automatic temperature compensation of pH
keys to provide for an intuitive user interface. and conductivity measurements.
Waterproof Protection
The meter is enclosed in an IP67 rated
Dedicated Help Key
waterproof casing and can withstand
immersion in water at a depth of 1 m for up Contextual help is always available through a
to 30 minutes. The probe features an IP68 dedicated “HELP” key. Clear tutorial messages
rating for continuous immersion in water. and directions are available on-screen to
Multiparameter
quickly and easily guide users through
setup and calibration. The help information
displayed is relative to the setting/option
GLP Data being viewed.
portable
samples with logging intervals from one
second to three hours.
www.hannainst.com | 7.35
Probe and Sensors
7 The HI7698195 is a multiparameter pH/EC/Temperature probe for use with the HI98195
portable meter. It features a Quick Connect DIN that makes a waterproof connection with the
meter. Sensors are automatically recognized by the probe and meter when connected. Any ports
not used on the probe will not have the parameter displayed on the meter. Sensor replacement
is quick and easy with field replaceable, screw type connectors that are color coded for easy
sensor identification. The probe features a multistrand-multiconductor shielded cable with 4m,
10m, 20m, and 40m lengths available. It’s rugged, waterproof design makes it ideal for field use.
Specifications HI7698195
Sensor Inputs two (pH or pH/ORP, EC)
Multiparameter
O-rings EPDM
HI9828-25
Quick Calibration
solution
portable
or
Tip glass (pH) glass (pH); Pt (ORP) stainless steel electrodes AISI 316
7.36 | www.hannainst.com
7
Specifications HI98195
Range 0.00 to 14.00 pH / ±600.0 mV
automatic one, two, or three points with automatic recognition of five standard buffers
Calibration
(pH 4.01, 6.86, 7.01, 9.18, 10.01) or one custom buffer
Multiparameter
Range ±2000.0 mV
Resolution 0.1 mV
ORP
Accuracy ±1.0 mV
manual: 1 µS/cm; 0.001 mS/cm; 0.01 mS/cm; 0.1 mS/cm; 1 mS/cm; automatic: 1 µS/cm from 0 to 9999 µS/cm; 0.01 mS/cm from
Resolution 10.00 to 99.99 mS/cm; 0.1 mS/cm from 100.0 to 400.0 mS/cm; automatic mS/cm: 0.001 mS/cm from 0.000 to 9.999 mS/cm;
EC 0.01 mS/cm from 10.00 to 99.99 mS/cm; 0.1 mS/cm from 100.0 to 400.0 mS/cm
automatic single point, with six standard solutions (84 µS/cm, 1413 µS/cm,
Calibration
5.00 mS/cm, 12.88 mS/cm, 80.0 mS/cm, 111.8 mS/cm) or custom point
Range 0.0 to 400.0 ppt (g/L) (the maximum value depends on the TDS factor)
manual: 1 ppm (mg/L); 0.001 ppt (g/L); 0.01 ppt (g/L); 0.1 ppt (g/L); 1 ppt (g/L); automatic: 1 ppm (mg/L) from
0 to 9999 ppm (mg/L); 0.01 ppt (g/L) from 10.00 to 99.99 ppt (g/L); 0.1 ppt (g/L) from 100.0 to 400.0 ppt (g/L);
Resolution
TDS automatic ppt (g/L): 0.001 ppt (g/L) from 0.000 to 9.999 ppt (g/L); 0.01 ppt (g/L) from 10.00 to 99.99 ppt (g/L);
0.1 ppt (g/L) from 100.0 to 400.0 ppt (g/L)
portable
Accuracy ±2% of reading or ±0.01 PSU whichever is greater
Temperature
automatic from -5 to 55°C (23 to 131°F)
Compensation
Battery Type / Life 1.5V AA batteries (4) / approximately 360 hours of continuous use without backlight (50 hours with backlight)
Dimensions / Weight 185 x 93 x 35.2 mm (7.3 x 3.6 x 1.4”) / 400 g (14.2 oz.)
HI98195 is supplied with HI7698195/4 multiparameter probe, HI7698194-1 pH/ORP sensor, HI7698194-3 EC sensor, HI9828-20 quick calibration
Ordering
solution, HI76981952 probe maintenance kit, HI76981943 calibration beaker, HI9298194 PC software, HI920015 micro USB cable, batteries (4),
Information quality certificate, and instruction manual in a rugged carrying case with custom insert.
pH and ORP solutions begin on page 2.142; EC, TDS and salinity solutions begin on page 5.34; www.hannainst.com | 7.37
HI98196
7 Multiparameter
Waterproof Meter
pH, ORP, Dissolved Oxygen,
Atmospheric Pressure and
Temperature
pH Features
• Calibration
·· Up to a three-point calibration
with five standard buffers and
Multiparameter
7.38 | www.hannainst.com
Backlit Graphic LCD Display Automatic Barometric Pressure
The HI98196 features a backlit graphic Compensation 7
LCD with on-screen help and the capability
The meter features a built-in barometer with
to display up to twelve parameters
user-selectable units for dissolved oxygen
simultaneously. The graphic display allows
pressure compensation.
for the use of virtual keys to provide for an
intuitive user interface.
Waterproof Protection
Dedicated Help Key
The meter is enclosed in an IP67 rated
Contextual help is always available through a
waterproof casing and can withstand
dedicated “HELP” key. Clear tutorial messages
immersion in water at a depth of 1 m for up
and directions are available on-screen to
to 30 minutes. The probe features an IP68
Multiparameter
quickly and easily guide users through
rating for continuous immersion in water.
setup and calibration. The help information
displayed is relative to the setting/option
GLP Data being viewed.
HI98196 includes a GLP feature that allows
users to view calibration data and calibration PC Connectivity
expiration information at the touch of a key.
Logged data can be transferred to a Window’s
Calibration data includes date, time, buffers/
compatible PC with the included HI920015
standards used for calibration, and slope
micro USB cable and HI9298194 software.
characteristics.
portable
identification.
Intuitive Keypad
Standard Calibration The fitted rubber keypad has dedicated keys
Standard pH calibration options are available for power, backlight, up/down arrows, help
for calibrating up to three points from a and alphanumeric characters. The meter also
selection of five standard buffers and one features two virtual soft keys that navigate
custom buffer. Dissolved oxygen calibration is the user through the configuration of each
up to two standard points or a single custom parameter, meter setup, and logging of data.
point. The interface is intuitive for any user’s level of
experience.
Auto-sensor Recognition
The probe and meter automatically recognize
the sensors that are connected. Any ports not
used on the probe will not have the parameter
displayed or be configurable.
Rugged custom carrying case
Automatic Temperature The HI98196 meter, probe, and all accessories
are supplied in a rugged carrying case
Compensation
designed to provide years of use. The
Integrated temperature sensor allows for inside compartment of the carrying case is
automatic temperature compensation of pH
Setup thermoformed to securely hold and protect all
and dissolved oxygen measurements. Extensive setup screen features of the components.
www.hannainst.com | 7.39
Probe and Sensors
7 The HI7698196 is a multiparameter pH/DO/Temperature probe for use with the HI98196
portable meter. It features a Quick Connect DIN that makes a waterproof connection with the
meter. Sensors are automatically recognized by the probe and meter when connected. Any ports
not used on the probe will not have the parameter displayed on the meter. Sensor replacement
is quick and easy with field replaceable, screw type connectors that are color coded for easy
sensor identification. The probe features a multistrand-multiconductor shielded cable with 4m,
10m, 20m, and 40m lengths available. It’s rugged, waterproof design makes it ideal for field use.
Specifications HI7698196
Sensor Inputs two (pH or pH/ORP, DO)
Multiparameter
O-rings EPDM
or
portable
Measurement Type pH, mV (pH) pH, mV (pH), ORP DO (% saturation and concentration)
Maintenance Solution HI70300 (storage solution) HI70300 (storage solution) HI7042S (DO electrolyte)
7.40 | www.hannainst.com
7
Multiparameter
Specifications HI98196
Range 0.00 to 14.00 pH / ±600.0 mV
Range ±2000.0 mV
Resolution 0.1 mV
ORP
Accuracy ±1.0 mV
portable
±1.5% of reading or ±0.10 ppm (mg/L), whichever is greater; 30.00 ppm (mg/L) to 50.00 ppm (mg/L): ±3% of reading
Range 450 to 850 mm Hg; 17.72 to 33.46 in Hg; 600.0 to 1133.2 mbar; 8.702 to 16.436 psi; 0.5921 to 1.1184 atm; 60.00 to 113.32 kPa
Atmospheric Resolution 0.1 mm Hg; 0.01 in Hg; 0.1 mbar; 0.001 psi; 0.0001 atm; 0.01 kPa
Pressure Accuracy ±3 mm Hg within ±15°C from the temperature during calibration
Temperature
automatic from -5 to 55°C (23 to 131°F)
Compensation
Battery Type / Life 1.5V AA batteries (4) / approximately 360 hours of continuous use without backlight (50 hours with backlight)
Dimensions / Weight 185 x 93 x 35.2 mm (7.3 x 3.6 x 1.4”) / 400 g (14.2 oz.)
HI98196 is supplied with HI7698196/4 multiparameter probe, HI7698194-1 pH/ORP sensor, HI7698194-2 DO sensor, HI9828-20 quick calibration
Ordering
solution, HI76981942 probe maintenance kit, HI76981943 calibration beaker, HI9298194 PC software, HI920015 micro USB cable, batteries (4),
Information quality certificate, and instruction manual in a rugged carrying case with custom insert.
7 pH/EC/TDS/
Temperature
Meters
• Waterproof
·· Designed to float if accidentally
dropped in a tank
• Expanded pH range
·· pH range is from -2.00 to 16.00 pH
• Adjustable EC to TDS conversion factor
Multiparameter
7
clogging of the junction will result in a reduced
• 3 sensors in a single probe
diffusion and as a result the readings will
• Pre-amplified pH electrode for become erratic. Most probes will have to have
resistance to electrical noise this junction cleaned and if not possible then
the probe has to be replaced. The extractable
• Extractable cloth junction to clear
cloth junction of the HI1288 allows for the
any clogging
renewing of the junction. Simply extract ⅛”
• Graphite EC/TDS sensor of the junction by pulling on the junction will
expose a new portion. Any clogging that was
The HI991301 and HI991300 are supplied present will be cleared and the response time
with an amplified polypropylene body pH/EC/ will be back to normal extending the life of the
TDS/temperature probe. The built in amplifier pH electrode.
will reduce the effects of electrical noise
The EC/TDS sensor is made of graphite. A
Multiparameter
on the high impedance pH measurement.
Examples of sources of electrical noise common problem with amperometric sensors
include rectifiers, motors and ballasts. is a polarization effect. With amperometric
sensors there are two poles in which a voltage
The HI1288 pH electrode also features an is alternated. The positive and negative ions
extractable cloth junction. Every pH electrode in the solution migrate to one of the negative
has a junction. Many use a single ceramic frit or positive poles. When the charges build up
which acts as a barrier between the inside on one of these poles a polarization effect
reference cell to the outside sample. This occurs. Having a conductivity sensor made of
barrier allows for a diffusion electrolyte that graphite reduces the polarization effect.
portable
pH Calibration memorized buffers (Standard 4.01, 7.01, 10.01 or NIST 4.01,
6.86, 9.18)
automatic one point at: 1382 automatic one point at: 6.44
EC/TDS Calibration ppm (CONV=0.5) or 1500 ppt (CONV=0.5) or 9.02 ppt
ppm(CONV=0.7) or 1413 µS/cm (CONV=0.7) or 12880 µS/cm
pH Temp. Compensaiton automatic automatic
EC/TDS Temperature automatic with β selectable from 0.0-2.4%/°C with 0.1
Compenation increments
Additional
Specifications TDS Conversion Factor selectable from 0.45 to 1.00 with 0.01 increments (default 0.50)
HI1288 polypropylene body, pre-amplified multiparameter
Probe (included) probe with internal temperature sensor, DIN connector and
1m cable
pH solutions begin on page 2.142; EC and TDS solutions begin on page 5.34;
See page 7.50 for probe specifications www.hannainst.com | 7.43
HI9814
7 GroLine pH / EC /
TDS / Temperature
Meter
with Multiparameter Probe
• Waterproof
·· Designed to withstand the humidity
of a growing environment
• Wide pH range
·· pH range is from 0.00 to 14.00 pH
Multiparameter
7.44 | www.hannainst.com
Measure nutrient solutions HI1285-7 Multiparameter Probe
with one probe • 3 sensors in a single probe 7
pH and EC/TDS are two of the most common • Gel filled maintenance free pH electrode
parameters measured in hydroponic nutrient • Amplified pH electrode
solutions. With the HI9814 there is no need
• Polypropylene body
to switch between meters or change probes. ·· The polypropylene body houses all the
The HI9814 uses a single specialized probe sensors in a single body design and
design to accurately measure both key is durable. The probe is gel filled for
parameters at the same time. maintenance free operation. It does not
have to be refilled periodically.
User-selectable features include selectable
TDS factors of 0.5 and 0.7 as well as auto-off The specially engineered HI1285-7 pH/
after 8 minutes, 60 minutes, or disabled. EC/TDS/temperature probe utilizes a fiber
Multiparameter
junction and gel electrolyte which provides
Quick Connect Digital Probe
Calibrate pH and EC with a fast response and reduced potential for The H1285-7 probe features a Quick Connect
contamination. These features make this DIN connector that makes a waterproof
one solution probe ideal for use in fertilizer solutions. connection with the meter.
The HI9814 offers a quick calibration feature
A solid-state preamplifier is integrated into
that allows for calibration of both parameters
the probe to protect the pH measurement
with a single solution. Simply enter calibration from transient electrical noise. Sources Significance of Use
mode and the meter will automatically detect of electrical noise include ballasts used in Hydroponics is a method of growing plants
and calibrate pH and EC sensors. EC calibration lighting and pumps to circulate water and in the absence of soil, fulfilling the notion
is automatically applied to TDS readings. nutrient solutions. that mineral nutrients can be delivered to
plants more effectively through the use of a
nutrient solution. Hydroponic solutions must
Specifications HI9814
be carefully monitored for both pH and EC, as
Range* 0.00 to 14.00 pH the amount of nutrients delivered to the plant
Resolution 0.01 pH will dictate its fertility and longevity.
Accuracy ±0.01 pH
EC readings can be expressed TDS; in
pH automatic, one or two-point calibration (using pH 4.01,
terms of hydroponics, TDS specifies the
Calibration 7.01, 10.01 buffers); one-point calibration using quick
calibration solution salt concentration and strength of a
nutrient solution. Since TDS is not a direct
Temperature
Compensation
automatic measurement, the conversion factor used
is based on the type of solution being
Range 0.00 to 6.00 mS/cm
measured. Offering the conversion factors
Resolution 0.01 mS/cm of 0.5 and 0.7 allows hydroponics growers
Accuracy ±2% F.S. to more accurately measure their unique
portable
EC
automatic, one-point at 1.41 mS/cm or 5.00 mS/cm; one- nutrient solutions.
Calibration
point calibration using quick calibration solution
Temperature
automatic, with β = 1.9%/°C
Compensation
Accuracy ±0.5°C/±1°F
Ordering
HI9814 is supplied with HI1285-7 multiparameter probe, Quick Cal quick calibration • Our optional HI710025 green
solution sachets (3), HI700661 electrode cleaning solution sachets (3), batteries, visual
Information shockproof rubber boot offers
quick start guide, and instructions.
maximum impact protection.
* The sensor is rated 0 to 12 pH and -5 to 30°C
**1000 µS/cm = 500 ppm with 0.5 CF
pH and Quick Cal solutions begin on page 2.142; EC and TDS solutions begin on page 5.34;
See page 7.50 for probe specifications www.hannainst.com | 7.45
HI9813-5 · HI9813-6
7 pH/EC/TDS/
Temperature
Portable Meter
• Waterproof
• CAL Check™ (HI9813-6)
·· Allows the user to easily check the
probe calibration status at any time.
• Variable EC to TDS conversion factor
·· Factor automatically adjusts from 0.56
Multiparameter
7.46 | www.hannainst.com
HI9813-6 CAL Check™ HI1285 series probes
Feature These meters are supplied with a polypropylene body
pH/EC/TDS/temperature probe. The pH, EC, TDS, and
7
The HI9813-6’s CAL Check feature
temperature sensor are housed in a single body that
alerts users if there is a problem
connects to the meter with a DIN connector.
with the pH electrode. This feature
is important for customers that
• 3 sensors in a single probe
calibrate only to pH 7.0; if there
is a fracture on the pH glass of • Amplified pH electrode
the electrode, the pH meter will ·· The pH electrode circuit has a built-in
always display pH 7.0 regardless amplifier that will reduce the effects of
of the solution being measured. electrical noise on the high impedance
This can be disastrous for the pH measurement. Examples of sources of
person that calibrates at pH 7.0 electrical noise include motors, ballasts, and
and takes readings of samples with pumps which are common in greenhouses.
Multiparameter
an expected pH of 7.0. The user • Amperometric EC/TDS sensor
will never be aware that there is a ·· The EC/TDS readings are performed by an
problem. Placing the HI1285-6 pH/ amperometric sensor. An alternating voltage is
EC electrode in HI50021 CAL Check applied to the sensor and the amount of current
solution and pressing the “Check” that passes between the two stainless steel
button helps users determine if pins is dependent upon the amount of salts
the probe needs to be calibrated, (fertilizer) present. A greater amount of salt
cleaned or replaced. The meter present results in an increase in conductance.
runs CAL Check diagnostics and will
display either “Probe is OK” or “Clean • Polypropylene body
Probe and Calibrate”. If the reading ·· The polypropylene body houses all the sensors
is around pH 4.0 when the probe is in a single body design and is durable. The probe
placed in the solution then the probe is gel filled for maintenance free operation. It
is broken and needs to be replaced. does not have to be refilled periodically.
portable
TDS Resolution 1 ppm (mg/L) 1 ppm (mg/L)
TDS Conversion Factor 0.56 to 0.78 ppm = 1 µS/cm (according to TDS 442 curve) 0.56 to 0.78 ppm = 1 µS/cm (according to TDS 442 curve)
pH & EC/TDS Calibration manual, one point (all parameters except temperature) manual, one point (all parameters except temperature)
automatic 0 to 70°C (32 to 158°F) with β=2%/°C automatic 0 to 70°C (32 to 158°F) with β=2%/°C
Temp. Compensation
(EC/TDS only) (EC/TDS only)
HI9813-5 is supplied with HI1285-5 multiparameter probe, HI70007 pH 7.01 calibration solution sachet, HI70442 1500 ppm (mg/L) calibration
solution sachet, HI70031 1413 µS/cm calibration solution sachet, HI700661 electrode cleaning solution sachets (2), battery and instructions.
Ordering
HI9813-6 is supplied with HI1285-6 multiparameter probe, HI70007 pH 7.01 calibration solution sachet, HI70442 1500 ppm (mg/L) calibration
Information
solution sachet, HI70031 1413 µS/cm calibration solution sachet, HI50021 calibration check solution sachets (2), HI700661 electrode cleaning
solution sachets (2), 9v battery (1), instructions and rugged carrying case.
pH solutions begin on page 2.142; EC and TDS solutions begin on page 5.34;
See page 7.50 for probe specifications www.hannainst.com | 7.47
HI9811-5 · HI9812-5
7 pH/EC/TDS/
Temperature
Portable Meters
• Waterproof
• Automatic Temperature Compensation
·· All readings are compensated
for variations in temperature
• Low battery indicator
Multiparameter
7.48 | www.hannainst.com
HI1285-5 probe
These meters are supplied with an HI1285-5 polypropylene body pH/EC/TDS/temperature
probe. The pH, EC, TDS, and temperature sensor are housed in a single body that connects to
7
the meter with a DIN connector.
• Amplified pH electrode
·· The pH electrode circuit has a built in amplifier that will reduce the effects of electrical
noise on the high impedance pH measurement. Examples of sources of electrical
noise include motors, ballasts, and pumps which are common in greenhouses.
• Amperometric EC/TDS sensor
·· The EC/TDS readings are performed by an amperometric sensor. An alternating
voltage is applied to the sensor and the amount of current that passes between
the two stainless steel pins is dependent upon the amount of salts (fertilizer)
present. A greater amount of salt present results in an increase in conductance.
Multiparameter
• Polypropylene body
·· The polypropylene body houses all the sensors in a single body
design and is durable. The probe is gel filled for maintenance free
operation. It does not have to be refilled periodically.
• 3 sensors in a single probe
• Gel filled maintenance free pH electrode
portable
EC Resolution 10 µS/cm 10 µS/cm
Temperature
automatic from 0 to 70°C (32 to 158°F) with β = 2% /°C (EC/TDS only)
Compensation
Additional HI1285-5 polypropylene body, pre-amplified multiparameter probe with internal temperature sensor,
Probe (included)
Specifications 8-pin DIN connector and 1 m (3.3’) cable
HI9811-5 and HI9812-5 are supplied with HI1285-5 multiparameter probe, HI70007 pH 7.01 calibration solution sachet, HI70032 1382 ppm (mg/L)
Ordering
calibration solution sachet, HI70031 1413 µS/cm calibration solution sachet, HI700661 electrode cleaning solution sachets (2), 9v battery (1),
Information instructions and rugged carrying case.
pH solutions begin on page 2.142; EC and TDS solutions begin on page 5.34;
See page 7.50 for probe specifications www.hannainst.com | 7.49
7 Replacement Probes
Multiparameter
190 mm
185 mm
185 mm
185 mm
105 mm
95 mm
95 mm
95 mm
15 mm
016 mm 016 mm 016 mm 020 mm
Tip /Shape spheric (dia: 8.0 mm) spheric (dia: 8.0 mm) spheric (dia: 8.0 mm) spheric (dia: 8.5 mm)
Cable 7-pole; 1 m (3.3’) 7-pole; 1 m (3.3’) 7-pole; 1 m (3.3’) 7-pole; 1 m cable (3.3’)
7.50 | www.hannainst.com
Table of Contents 8
Magnetic Stirrers
Introduction���������������������������8.2
table of contents
Stirrers�������������������������������������8.3
Standard������������������������������������������������������������������ 8.3
Heavy-Duty������������������������������������������������������������8.4
Compact, Round Edge
with electrode holder��������������������������������������� 8.6
Compact, Round Edge���������������������������������������8.8
www.hannainst.com | 8.1
8 Magnetic Stirrers
Magneitc Stirrers
introduction
Speedsafe™ from Hanna Speed sensor and limiter: Each Hanna stirrer is equipped with a
speed sensing device (opto-sensor) coupled with an FVC (frequency
There are two types of magnetic stirrers; mechanical and electronic. voltage converter), which monitors the speed. As the speed reaches a
Most manufacturers of magnetic stirrers use the mechanical approach, preset maximum level, the speed limiter shuts down the VCO (voltage-
using steel and aluminum for the structural material and outdated controlled oscillator) to slow down the motor speed. This ensures that
methods of speed control. These units are not only very heavy, but when the load is suddenly removed from the stirrer, the motor will not
also very inaccurate. The use of these materials and methods appear accelerate to such a high speed that will be hazardous to both the user
to make the units rugged and strong, but they are instead cumbersome and the stirrer; a feature not commonly found in conventional stirrers.
and obsolete.
Sophisticated Engineering
Something as simple as completely dissolving salts in a medium is, in
Parts are engineered and manufactured to strict specifications to
reality, a science. Often this cannot be achieved with simple mechanical ensure absolute reliability. All components are mounted into a molded
processes. The only choice that the user has with mechanical products casing covered with either ABS plastic or a stainless steel plate, which
is to increase the stirring time or the temperature. With electronics, are splash-proof and chemically-resistant. Minimal vibration and a
you can do more... the Hanna approach is electronic. well-balanced rotating arm provide years of trouble-free operation.
8.2 | www.hannainst.com
HI190M • HI190M-0 • HI200M
Magnetic Stirrers
speed to 1000 rpm even if a
load is suddenly removed
• Built to last
·· The ABS housing of HI190M
and HI190 M-0 resists most
harmful chemicals in the lab
• Stainless
steel cover The HI190M, HI190M-0 and HI200M are
compact and lightweight, so that lack of
laboratory bench space is no longer a concern.
standard
HI200M has an AISI 316 stainless steel cover.
This model is ideal for applications that create
exothermic reactions.
Installation Category II II II
Cover Material ABS plastic ABS plastic AISI 316 stainless steel
Weight 640 g (1.4 lbs.) 610 g (1.3 lbs.) 710 g (1.6 lbs.)
www.hannainst.com | 8.3
HI300N • HI310N HI302N
Speedsafe™ Speedsafe™
Magneitc Stirrers
• Stainless • Stainless
steel cover steel cover
HI300N and HI310N are heavy-duty stirrers. HI300N can stir up to 2.5 The HI302N model can stir up to 2.5 liters (0.66 gallons). It is often
liters (0.66 gallons) of liquid and the HI310N can stir up to 5.0 liters (1.3 desirable to stir your samples in two directions. This will achieve
gallons). This makes them perfect for laboratory use as well as for use maximum homogeneity and solubility. An advanced circuit allows
in production. Electronic controls are incorporated into these stirrers HI302N to reverse the direction of the stirring at a user-selected
that allow the user to regulate the speed with greater precision. With interval. The interval can be adjusted from 30 seconds up to 3 minutes.
Hanna ’s Speedsafe™, a limiter will assure that the maximum speed will In addition to precision speed control, a limiter will also assure that the
never be exceeded. maximum speed will never be exceeded.
HI310N also has an automatic feedback feature. The motor is Hanna stirrers incorporate a VCO device that stops the motor from
electronically controlled to maintain the chosen speed as the load accelerating as soon as a load is removed (Speedsafe™).
changes. If the viscosity or the level (fluid weight) increases or
decreases, the circuitry will adjust the output power to keep the
heavy-duty
speed constant.
Min. Speed Range 100 rpm Low Speed Range 100 rpm
Max. Speed Range 800 to 1000 rpm High Speed Range 800 to 1000 rpm
Power Supply 110/115 VAC or 230/240 VAC, 50/60 Hz Power Supply 110/115 VAC or 220/240V, 50/60 Hz
Cover Material AISI 316 stainless steel Cover Material AISI 316 stainless steel
Environment 0 to 50°C (32 to 122°F); RH max 95% Environment 0 to 50°C (32 to 122°F); RH max 95%
Dimensions 180 x 180 x 70 mm (7.1 x 7.1 x 2.8’’) Dimensions 180 x 180 x 70 mm (7.1 x 7.1 x 2.8”)
Accessories HI731320 Magnetic stir bar (10) Accessories HI731320 Magnetic stir bar (10)
8.4 | www.hannainst.com
HI304N HI324N
Speedsafe™ Speedsafe™
Magnetic Stirrers
• Stainless • Stainless
steel cover steel cover
When stirring a solution, to work with a constant speed is an important HI324N is a heavy-duty stirrers that incorporate a timer control
factor in ensuring that the best repeatability in tests and processes is that will turn the motor off after a selected amount of time. The
achieved. Without a tachometer, there is no way of knowing the RPMs. time is adjustable from 5 minutes to 2 hours. This feature allows the
user to carry out other tasks without worrying about over or under
HI304N is a heavy-duty stirrer with a built-in tachometer. It is stirring. HI324N can stir up to 5.0 liters (1.3 gallons), making it ideal for
often desirable to stir in two directions in order to achieve maximum laboratory and production use.
homogeneity. An advanced circuit allows HI304N to reverse the
direction of the stir at a user-selected interval. The interval can be This stirrer allows regulated speed control. A limiter will assure
adjusted from 30 seconds up to 3 minutes. In addition to precision the maximum speed is never exceeded (Speedsafe™).
speed control, a limiter will also assure that the maximum speed will
never be exceeded (Speedsafe™). Often, a sample is removed from the HI324N has an automatic feedback feature and incorporates an LCD
stirrer before the user reduces the speed. This can cause the motor tachometer. The motor is electronically-controlled to maintain the
heavy-duty
to accelerate until it is destroyed. Hanna stirrers incorporate a VCO chosen speed as the load changes. If the viscosity or the level increases
device that will stop the motor from accelerating as soon as the load or decreases, the circuitry will adjust the output power. The HI324N’s
is removed. RPM display guarantees repeatability in QC tests and research by
constantly displaying the RPMs.
Low Speed Range 100 rpm Low Speed Range 100 rpm
High Speed Range 800 to 1000 rpm High Speed Range 800 to 1000 rpm
Reverse Interval from 30 seconds to 3 minutes Timer Range from 5 minutes to 2 hours
Power Supply 110/115 VAC or 220/240 VAC, 50/60 Hz Tachometer four-digit LCD
Environment 0 to 50°C (32 to 122°F); RH max 95% Cover Material AISI 316 stainless steel
Dimensions / Weight 180 x 180 x 70 mm (7.1 x 7.1 x 2.8”) / 1.4 kg (3.1 lbs.) Environment 0 to 50°C (32 to 122°F); RH max 95%
Ordering HI304N-1 (115V) and HI304N-2 (230V) is supplied Dimensions 180 x 180 x 70 mm (7.1 x 7.1 x 2.8”)
Information with magnetic stir bar and instructions
Weight 1.4 kg (3.1 lb.)
Accessories HI731320 Magnetic stir bar (10)
Ordering HI324N-1 (115V) and HI324N-2 (230V) are supplied with
Information magnetic stir bar and instructions
www.hannainst.com | 8.5
HI181
8 Compact Magnetic
Mini-Stirrers
with Electrode Holder
• Electrode holder
·· The HI181 series features an electrode
holder that fits into the base.
• Round edge
• Dynamic design
·· Easy to handle, these lightweight and
Magneitc Stirrers
Speedsafe™
8.6 | www.hannainst.com
11 colors to choose from
8
Magnetic Stirrers
HI181 - Black HI181W - Arctic White HI181F - Blue HI181K - Orange
Ordering Information
All models include electrode holder, micro stir bar and
instructions
HI181-1 Black mini-stirrer (115V)
round edge
HI181-2 Black mini-stirrer (230V)
HI181W-1 Arctic White mini-stirrer (115V)
HI181W-2 Arctic White mini-stirrer (230V)
HI181F-1 Blue mini-stirrer (115V)
HI181F-2 Blue mini-stirrer (230V)
HI181F-3 Blue mini-stirrer (AUS plug)
HI181K-1 Orange mini-stirrer (115V)
HI181M - Moss Green HI181E - Green HI181L - Lavender
HI181K-2 Orange mini-stirrer (230V)
HI181J-1 Charcoal mini-stirrer (115V)
HI181J-2 Charcoal mini-stirrer (230V)
HI181I-1 Ivory mini-stirrer (115V)
Specifications HI181
HI181I-2 Ivory mini-stirrer (230V)
Maximum Stirring Capacity 1 liter (0.26 gallons)
HI181C-1 Glacier Blue mini-stirrer (115V)
Min. Speed Range 100 rpm
HI181C-2 Glacier Blue mini-stirrer (230V)
Max. Speed Range 1000 rpm
HI181A-1 Yellow mini-stirrer (115V)
Power Supply 110/115 VAC or 220/240 VAC, 50/60 Hz HI181A-2 Yellow mini-stirrer (230V)
Installation Category II HI181M-1 Moss Green mini-stirrer(115V)
Cover Material ABS plastic HI181M-2 Moss Green mini-stirrer (230V)
Environment 0 to 50°C (32 to 122°F) ; RH max 95% HI181E-1 Green mini-stirrer(115V)
Accessories HI731319 Magnetic micro stir bar (10) HI181L-2 Lavender mini-stirrer (230V)
www.hannainst.com | 8.7
HI180
8 Compact Magnetic
Mini-Stirrers
• Round edge
HI180 - Black
HI180W - Arctic White HI180F - Blue HI180K - Orange
Ordering Information
All models are supplied with micro stir bar and
instructions
HI180M - Moss Green HI180E - Green HI180L - Lavender HI180J-1 Charcoal mini-stirrer (115V)
Maximum Stirring Capacity 1 liter (0.26 gallons) HI180C-1 Glacier Blue mini-stirrer (115V)
Min. Speed Range 100 rpm HI180C-2 Glacier Blue mini-stirrer (230V)
Power Supply 110/115 VAC or 220/240 VAC, 50/60 Hz HI180A-2 Yellow mini-stirrer (230V)
Accessories HI731319 Magnetic micro stir bar (10) HI180L-2 Lavender mini-stirrer (230V)
8.8 | www.hannainst.com
Table of Contents 9
table of contents
Product Spotlights���������������������������������������������9.3 Test Kits������������������������������9.38
Single Parameter Quick Reference������������9.4
Water Quality ���������������������������������������������������9.38
Multiparameter Quick Reference���������������9.6
Soil Quality ���������������������������������������������������������9.40
Backpack Lab® Quick Reference���������������� 9.7
Marine Science ������������������������������������������������9.42
www.hannainst.com | 9.1
9
Chemical Test Kits
Hanna test kits are a simple way to perform an accurate chemical Every kit is manufactured according to the highest quality standards
analysis. The wide variety of single parameter test kits presented and a Safety Data Sheet (SDS) is available for each product, online.
in this section includes colorimetric, checker disc, titration and
turbidimetric methods.
Designed for Specific Applications
Quick and easy to use, Hanna colorimetric chemical test kits are the Hanna combination chemical test kits are tailor made for specific
ideal solution for water analysis of many chemical parameters. The kits applications:
are equipped with a transparent container which has the color scale
right next to the sample being tested. This makes the color comparison
Includes all you need
process simple and error free. The reagents are either liquid or powder,
depending on the parameter to be measured. Hanna test kits include all the necessary reagents and accessories for
introduction
Titration test kits are easy to use without any loss of resolution and
Comprehensive Instructions
accuracy. To determine the concentration of the chemical parameter, Every chemical test kit is supplied with a comprehensive, easy-to-
these kits utilize a titration technique which consists of counting the understand instruction manual. The manuals guide you through the
number of drops of titrant necessary to cause a color change in the analysis step-by-step, making it easy for even non-technical personnel
sample. Dropper bottles make titration extremely quick and easy to perform tests.
without compromising accuracy. The endpoint can be determined
with enhanced accuracy and simplicity.
One more advantage: Hanna’s exclusive pHep® for
Hanna test kits are supplied ready to use, complete with all the pH measurements
necessary accessories. They are designed to help you to work better,
For those kits that offer pH measurements, Hanna has included the
faster and safer. All Hanna chemical test kits use color-coded dropper
bottles which are easy to recognize during analysis. exclusive pHep® electronic tester so that your pH analysis will always
be quick and reliable. Traditional pH test strips have limited accuracy
With some kits, a plastic beaker is provided featuring a ported cap to and do not cover the entire pH range. Due to the pHep®'s long life, high
prevent spills and waste. accuracy and extended range, these problems are avoided.
9.2 | www.hannainst.com
Product Spotlights 9
HI3814
The HI3814 is a chemical test kit that determines that uses titration
and direct measurement to measure six parameters common in
HI3896
Testing the soil during each crop cycle and comparing the results with
product spotlights
plant growth can be a useful information for subsequent cultivations.
HI3899BP
www.hannainst.com | 9.3
9 Single Parameter Test Kits
Chlorine Free checker disc 0.0-3.5 mg/L (ppm) 100 HI3875 9.15
Chromium Chromium (as CrVI) colorimetric 0.0-1.0 mg/L (ppm) 100 avg. HI3846 9.18
0-1%;
Formaldehyde Formaldehyde titration 110 avg. HI3838 9.19
0-10%
Hardness (as CaCO₃) Total titration 0-30 gpg 100 HI38033 9.20
Hardness
Hardness (as CaCO₃) Total titration 0-150 mg/L (ppm) 50 avg. HI3840 9.21
Hardness (as CaCO₃) Total titration 40-500 mg/L (ppm) 50 avg. HI3841 9.21
Hardness (as CaCO₃) Total titration 400-3000 mg/L (ppm) 50 avg. HI3842 9.21
0.00-2.00 mg/L;
Hydrogen Peroxide Hydrogen Peroxide titration 100 avg. HI3844 9.22
0.0-10.0 mg/L
Hypochlorite Hypochlorite (as Cl₂) titration 50-150 g/L (ppt) 100 avg. HI3843 9.22
Nitrate (as NO₃̄—N) colorimetric 0-50 mg/L (ppm) 100 HI3874 9.25
Nitrate Nitrate (as NO₃̄—N) water: 0-50 mg/L (ppm); 100
checker disc HI38050 9.25
(Irrigation Water and Soil) soil: 0-60 mg/L (ppm) 100
Nitrite Nitrite (as NO₂̄—N) colorimetric 0.0-1.0 mg/L (ppm) 100 HI3873 9.26
9.4 | www.hannainst.com
Single Parameter Test Kits 9
Ozone Ozone checker disc 0.0-2.3 mg/L (ppm) 100 HI38054 9.27
Sulfate (as SO₄²¯) turbidimetric 20-100 mg/L (ppm) 100 HI38000 9.29
Sulfate 100-1000 mg/L (ppm);
Sulfate (as SO₄²¯) titration 200 HI38001 9.30
1000-10000 mg/L (ppm)
www.hannainst.com | 9.5
9 Multiparameter Test Kits
Alkalinity (as CaCO₃) titration 0-100 mg/L (ppm); 0-300 mg/L (ppm) 110 avg.
Chloride (as Cl¯) titration 0-100 mg/L (ppm); 0-1000 mg/L (ppm) 110 avg.
HI3827 Boiler and Hardness (as CaCO₃) titration 0.0-30.0 mg/L (ppm); 0-300 mg/L (ppm) 100 avg.
9.32
Feedwater Test Kit Phosphate colorimetric 0-5 mg/L (ppm) 50
Sulfite (as Na₂SO₃) titration 0.0-20.0 mg/L (ppm); 0-200 mg/L (ppm) 110 avg.
Alkalinity (as CaCO₃) titration 0-100 mg/L (ppm); 0-300 mg/L (ppm) 110 avg.
Chloride (as Cl¯) titration 0-100 mg/L (ppm); 0-1000 mg/L (ppm) 110 avg.
quick reference charts
HI3821 Cooling and Boiler Hardness (as CaCO₃) titration 0.0-30.0 mg/L (ppm); 0-300 mg/L (ppm) 100 avg.
9.33
Combination Test Kit Phosphate colorimetric 0-5 mg/L (ppm) 50 avg.
Sulfite (as Na₂SO₃) titration 0.0-20.0 mg/L (ppm); 0-200 mg/L (ppm) 110 avg.
Acidity (as CaCO₃) titration 0-100 mg/L (ppm); 0-500 mg/L (ppm) 110 avg.
Alkalinity (as CaCO₃) titration 0-100 mg/L (ppm); 0-300 mg/L (ppm) 110 avg.
0.0-10.0 mg/L (ppm); 0.0-50.0 mg/L (ppm);
HI3814 Environmental Carbon Dioxide titration
0-100 mg/L (ppm)
110 avg.
9.34
Monitoring Test Kit Hardness (as CaCO₃) titration 0.0-30.0 mg/L (ppm); 0-300 mg/L (ppm) 100 avg.
Alkalinity (as CaCO₃) titration 0-100 mg/L (ppm); 0-300 mg/L (ppm) 110 avg.
HI3823 Marine Test Kit Hardness (as CaCO₃) titration 0.0-30.0 mg/L (ppm); 0-300 mg/L (ppm) 100 avg. 9.35
Alkalinity (as CaCO₃) titration 0-100 mg/L (ppm); 0-300 mg/L (ppm) 110 avg.
Chloride (as Cl¯) titration 0-100 mg/L (ppm); 0-1000 mg/L (ppm) 110 avg.
HI3817 Water Quality Hardness (as CaCO₃) titration 0.0-30.0 mg/L (ppm); 0-300 mg/L (ppm) 100 avg.
9.37
Test Kit Iron colorimetric 0-5 mg/L (ppm) 50
Sulfite (as Na₂SO₃) titration 0.0-20.0 mg/L (ppm); 0-200 mg/L (ppm) 110 avg.
9.6 | www.hannainst.com
Backpack Lab® Multiparameter Test Kits 9
Alkalinity (CaCO₃)
titration 0-100 mg/L (ppm); 0-300 mg/L (ppm) 110
Phenolphthalein & Total
Hardness (CaCO₃) titration 0.0-30.0 mg/L (ppm); 0-300 mg/L (ppm) 100
HI3817BP Backpack Lab® Nitrate (NO₃̄—N) colorimetric 0-50 mg/L (ppm) 100
Hanna electronic
EC 0-3999 µS/cm life of meter
Combo tester
Hanna electronic
TDS 0-2000 ppm life of meter
Combo tester
Hanna electronic
Temperature -5-60.0°C life of meter
Combo tester
colorimetric 4 to 9 pH (1 pH increments) 50
Hanna electronic
TDS 0 to 2000 ppm life of meter
Combo tester
Hanna electronic
Temperature -50.0 to 220°C life of meter
Combo tester
Acidity (CaCO₃) titration 0-100 mg/L (ppm); 0-500 mg/L (ppm) 110 avg.
Alkalinity (CaCO₃)
titration 0-100 mg/L (ppm); 0-300 mg/L (ppm) 110 avg.
Phenolphthalein & Total
Carbon Dioxide (CO₂) titration 0.0-10.0 mg/L (ppm); 0.0-50.0 mg/L (ppm) 110 avg.
Hanna electronic
EC 0-3999 µS/cm life of meter
Combo tester
Hanna electronic
TDS 0-2000 ppm life of meter
Combo tester
Hanna electronic
Temperature -5-60.0°C life of meter
Combo tester
www.hannainst.com | 9.7
HI3897
Chemical Parameters
Olive Storage Period
within 48 hours 2 to 4 days over 4 days
(between harvesting and extraction)
9.8 | www.hannainst.com
In accordance with the European Community
9
(EC) reg. CEE2568/91 quality classification
of olive oil based on acidity (expressed as
percent oleic acid) is as follows:
Reagent HI3820-100 Acidity (as CaCO₃), 110 tests avg Reagent HI3811-100 Alkalinity (as CaCO₃), 110 tests avg
* 1 gpg = 17 ppm CaCO₃
The HI3824 is a colorimetric chemical test kit that determines the The HI3826 is a colorimetric chemical test kit that determines the
ammonia concentration in fresh water within a 0.0 to 2.5 mg/L (ppm) ammonia concentration in seawater within a 0.0 to 2.5 mg/L (ppm)
range as NH₃-N. The HI3824 is supplied with all of the necessary range as NH₃-N. The HI3826 is supplied with all of the necessary
reagents and equipment to perform the analysis. The test kit contains reagents and equipment to perform the analysis. The test kit contains
enough reagents for perform approximately 25 tests. enough reagents for perform approximately 25 tests.
Specifications HI3824 Ammonia (as NH₃—N) in fresh water Specifications HI3826 Ammonia (as NH₃—N) in saltwater
Type colorimetric Type colorimetric
Smallest Increment 0.5 mg/L (ppm) Smallest Increment 0.5 mg/L (ppm)
HI3824 test kit comes with 20 mL plastic beaker, color HI3826 test kit comes with 20 mL plastic beaker, color
Ordering Ordering
comparison cube, 20 mL ammonia reagent 1 (for fresh comparison cube, 20 mL ammonia reagent 1 (for seawater)
Information water) and 20 mL Nessler reagent. Information and 20 mL Nessler reagent.
HI3824-025 Ammonia (fresh water) (as NH₃—N), HI3826-025 Ammonia (seawater) (as NH₃—N),
Reagent 25 tests avg
Reagent 25 tests avg
Reagent HI38074-100 Boron, 100 tests avg Reagent HI3830-060 Bromine, 60 tests avg
Specifications HI3818 Carbon Dioxide (as CO₂) Specifications HI3815 Chloride (as Cl¯)
Type titration Type titration
HI3818 test kit comes with 10 mL phenolphthalein HI3815 test kit comes with 15 mL diphenylcarbazone
Ordering indicator, 120 mL carbon dioxide reagent, 10 mL calibrated Ordering indicator, 30 mL nitric acid solution, 120 mL mercuric
Information vessel, 50 mL calibrated vessel and calibrated syringe Information nitrate solution, 50 mL calibrated vessel, 10 mL calibrated
with tip. vessel, calibrated syringe with tip.
Reagent HI3818-100 Carbon Dioxide, 110 tests avg Reagent HI3815-100 Chloride, 110 tests avg
The HI3829F is a colorimetric chemical test kit that determines the The HI3831F is a colorimetric chemical test kit that determines the
free chlorine concentration within a 0.0 to 2.0 mg/L (ppm) range. The free chlorine concentration within a 0.0 to 2.5 mg/L (ppm) range. The
HI3829F is supplied with all of the necessary reagents and equipment HI3831F is supplied with all of the necessary reagents and equipment
to perform the analysis. The test kit contains enough reagents for to perform the analysis. The test kit contains enough reagents for
perform approximately 50 tests. perform approximately 50 tests.
and reagent packets and dropper bottles. and reagent packets and dropper bottles.
• High resolution • High resolution
·· Readings from 0.0 to 2.0 mg/L are ·· Readings from 0.0 to 2.5 mg/L are
determined to 0.5 mg/L resolution. determined to 0.5 mg/L resolution.
• Replacement reagents available • Replacement reagents available
·· There is no need to buy a new kit when reagents ·· There is no need to buy a new kit when reagents
are exhausted. The HI3829F-050 can be ordered are exhausted. The HI3831F-050 can be ordered
to replace the reagents supplied with the kit. to replace the reagents supplied with the kit.
Specifications HI3829F Free Chlorine (as Cl₂) Specifications HI3831F Free Chlorine (as Cl₂)
Type colorimetric Type colorimetric
Range 0.0 to 2.0 mg/L (ppm) Range 0.0 to 2.5 mg/L (ppm)
Smallest Increment 0.5 mg/L (ppm) Smallest Increment 0.5 mg/L (ppm)
Ordering HI3829F test kit comes with color comparison cube, Ordering HI3831F test kit comes with color comparison cube,
Information 20 mL reagent 1 and 15 mL reagent 2 Information 20 mL reagent 1 and 15 mL reagent 2.
Reagent HI3829F-050 free chlorine, 50 tests avg. Reagent HI3831F-050 free chlorine, 50 tests avg.
The HI3875 is a chemical test kit that determines the free chlorine The HI38018 is a chemical test kit that determines the free chlorine
concentration within a 0.0 to 3.5 mg/L (ppm) range. The HI3875 is concentration in two ranges: 0.00 to 0.70 mg/L and 0.0 to 3.5 mg/L.
supplied with all of the necessary reagents and equipment to perform The HI38018 is supplied with all of the necessary reagents and
the analysis, including the Checker<sup>®</sup> disc for accurate equipment to perform the analysis, including the Checker® disc for
determination. The test kit contains enough reagents for perform accurate determination. The test kit contains enough reagents for
approximately 100 tests. perform approximately 200 tests.
Reagent HI3875-100 free chlorine, 100 tests avg. Reagent HI38018-200 free chlorine, 200 tests avg.
9 Free & Total Chlorine Test Kit Free & Total Chlorine Test Kit
Low and Medium Range with Checker® Disc Low, Medium and High Range with Checker® Disc
The HI38017 is a chemical test kit that determines the free and total The HI38020 is a chemical test kit that determines the free and total
chlorine concentration in two ranges: 0.00 to 0.70 mg/L and 0.0 to 3.5 chlorine concentration in three ranges: 0.00 to 0.70 mg/L, 0.0 to
mg/L. The HI38017 is supplied with all of the necessary reagents and 3.5 mg/L, and 0.0 to 10.0 mg/L. The HI38020 is supplied with all of
equipment to perform both analyses, including the Checker® disc for the necessary reagents and equipment to perform both analyses,
accurate determination. The test kit contains enough reagents for including the Checker® disc for accurate determination. The test kit
perform approximately 200 tests. contains enough reagents for perform approximately 200 tests.
glass vials, plastic pipette, reagent packets, and Checker® disc. with the test kit, such as the glass
vials, plastic pipette, reagent
• High resolution
packets, and Checker® disc.
·· Readings from 0.00 to 0.70 mg/L are
determined to 0.02 mg/L resolution. • High resolution
·· Readings from 0.0 to 3.5 mg/L are ·· Readings from 0.00 to 0.70 mg/L are
determined to 0.1 mg/L resolution. determined to 0.02 mg/L resolution.
·· Readings from 0.0 to 3.5 mg/L are
• Replacement reagents available
determined to 0.1 mg/L resolution.
·· There is no need to buy a new kit when reagents
·· Readings from 0.0 to 10.0 mg/L are
are exhausted. The HI38017-200 can be ordered
determined to 0.5 mg/L resolution.
to replace the reagents supplied with the kit.
• Replacement reagents available
Significance of Use ·· There is no need to buy
a new kit when reagents
Chlorine is the most commonly used water disinfectant in applications
are exhausted. The HI38020-200 can be ordered
such as drinking water and wastewater treatment, pool and spa
to replace the reagents supplied with the kit.
sanitization, and food processing and sterilization. Chlorine present in
water binds with bacteria, leaving only a part of the original quantity
Significance of Use
(free chlorine) to continue its disinfecting action. If the free chlorine level
is improper with respect to pH, water will have an unpleasant taste and Chlorine is the most commonly used water disinfectant in applications
odor and the disinfecting such as drinking water and wastewater treatment, pool and spa
potential of the chlorine will sanitization, and food processing and sterilization. Chlorine present in
be diminished. water binds with bacteria, leaving only a part of the original quantity
(free chlorine) to continue its disinfecting action. If the free chlorine
Free chlorine reacts with level is improper with respect to pH, water will have an unpleasant taste
ammonium ions and organic and odor and the disinfecting potential of the chlorine will be diminished.
compounds to form chlorine
compounds; this results Free chlorine reacts with ammonium ions and organic compounds
in diminished disinfecting to form chlorine compounds; this results in diminished disinfecting
capabilities compared with capabilities compared with free chlorine. Chlorine compounds
free chlorine. Chlorine together with chloramines form combined chlorine. Combined chlorine
compounds together with and free chlorine together result in total chlorine. While free chlorine
chloramines form combined has a much higher disinfectant potential, combined chlorine has a
chlorine. Combined chlorine and free chlorine together result in total much higher stability and lower volatility.
chlorine. While free chlorine has a much higher disinfectant potential,
combined chlorine has a much higher stability and lower volatility.
Specifications HI38020 Free & Total Chlorine (as Cl₂)
Specifications HI38017 Free & Total Chlorine (as Cl₂) Type checker disc
Type checker disc 0.00-0.70 mg/L (ppm)
0.00-0.70 mg/L (ppm) Range 0.0-3.5 mg/L (ppm)
Range 0.0-10.0 mg/L (ppm)
0.0-3.5 mg/L (ppm)
Reagent HI38017-200 free & total chlorine, 200 tests avg. Reagent HI38020-200 free & total chlorine, 200 tests avg.
The HI3831T is a colorimetric chemical test kit that determines the The HI38023 is a titration-based chemical test kit that determines the
total chlorine concentration within a 0.0 to 2.5 mg/L (ppm) range. The total chlorine concentration within a 10 to 200 mg/L (ppm) range. The
HI3831T is supplied with all of the necessary reagents and equipment HI38023 is supplied with all of the necessary reagents and equipment
to perform the analysis. The test kit contains enough reagents for to perform the analysis. The test kit contains enough reagents for
perform approximately 50 tests. perform approximately 100 tests.
·· Readings from 0.0 to 1.0 mg/L CrVI are ·· Readings from 0 to 2.5 mg/L are determined
determined to 0.2 mg/L resolution. to 0.5 mg/L resolution.
• Replacement reagents available • Replacement reagents available
·· There is no need to buy a new kit when reagents ·· There is no need to buy a new kit when reagents
are exhausted. The HI3846-100 can be ordered to are exhausted. The HI3847-100 can be ordered to
replace the reagents supplied with the kit. replace the reagents supplied with the kit.
Smallest Increment 0.2 mg/L (ppm) Smallest Increment 0.5 mg/L (ppm)
Ordering HI3846 test kit comes with HI3846-0 reagent (100 Ordering HI3847 test kit comes with HI3847-0 reagent (100
Information packets) and color comparison cube. Information packets) and color comparison cube.
Reagent HI3846-100 chromium VI, 100 tests avg. Reagent HI3847-100 copper, 100 tests avg.
Significance of Use
Formaldehyde is an important organic compound used to make many
materials and chemical compounds. Its role in many industries varies
from holding dyes onto fabrics, to assisting in the electroplating of
metals. Formaldehyde is also used in biological preservation, drug
testing, and photograph development. Each application uses different
levels of formaldehyde and requires monitoring to optimize its given
purpose. Formaldehyde is also a large consideration for human
health. Due to its widespread use, there are regulations in place for
formaldehyde limits within workplaces to avoid overexposure.
Reagent HI3838-100 formaldehyde, 110 tests avg. Reagent HI3859-025 glycol, 25 tests avg.
·· Readings from 0.0 to 30.0 mg/L are ·· Readings from 0 to 30 gpg are determined to 1 gpg resolution.
determined to 0.3 mg/L resolution.
• Replacement reagents available
·· Readings from 0 to 300 mg/L are
·· There is no need to buy a new kit when reagents
determined to 3 mg/L resolution.
are exhausted. The HI38033-100 can be ordered
• Replacement reagents available to replace the reagents supplied with the kit.
·· There is no need to buy a new kit when reagents
are exhausted. The HI3812-100 can be ordered to Significance of Use
replace the reagents supplied with the kit. Water hardness has traditionally been defined as the capacity of
water to precipitate soap. The ionic species in the water causing the
Significance of Use precipitation was later found to be primarily calcium and magnesium.
Water hardness has traditionally been defined as the capacity of Thus, water hardness is actually a quantitative measure of these ions
water to precipitate soap. The ionic species in the water causing the in the water. It is also now known that certain other ion species, such
precipitation was later found to be primarily calcium and magnesium. as iron, zinc, and manganese contribute to the overall water hardness.
Thus, water hardness is actually a quantitative measure of these ions The measure and subsequent control of water hardness is essential to
in the water. It is also now known that certain other ion species, such prevent scaling and clogging in water pipes.
as iron, zinc, and manganese contribute to the overall water hardness.
The measure and subsequent control of water hardness is essential to
prevent scaling and clogging in water pipes.
Range
0.0-30.0 mg/L (ppm) Specifications HI38033 Total Hardness (*as CaCO₃)
0-300 mg/L (ppm)
Type titration
0.3 mg/L (ppm)
Smallest Increment Range 0-30 gpg
3 mg/L (ppm)
Smallest Increment 1 gpg
Method EDTA
Method EDTA
Number of Tests 100 avg.
Number of Tests 100 avg.
HI3812 test kit comes with 30 mL hardness buffer, 10 mL
Ordering calmagite indicator, 120 mL EDTA solution, 20 mL plastic HI38033 test kit comes with 30 mL buffer solution, 10 mL
Ordering
Information beaker with cap, 50 mL plastic beaker with cap and 1 mL calmagite indicator, 75 mL EDTA solution (2), 20 mL plastic
syringe with tip. Information beaker with cap and 1 mL plastic pipette.
Reagent HI3812-100 total hardness (*as CaCO₃), 100 tests avg. Reagent HI38033-100 total hardness (*as CaCO₃), 100 tests avg.
The HI3840 is a titration-based chemical The HI3841 is a titration-based chemical The HI3842 is a titration-based chemical
test kit that determines the total hardness test kit that determines the total hardness test kit that determines the total hardness
concentration within the 0 to 150 mg/L concentration within the 40 to 500 mg/L concentration within the 400 to 3000 mg/L
range. The HI3840 is supplied with all of range. The HI3841 is supplied with all of range. The HI3842 is supplied with all of
the necessary reagents and equipment to the necessary reagents and equipment to the necessary reagents and equipment to
Range 0-150 mg/L (ppm) Range 40-500 mg/L (ppm) Range 400-3000 mg/L (ppm)
Smallest Increment 5 mg/L (ppm) Smallest Increment 20 mg/L (ppm) Smallest Increment 100 mg/L (ppm)
HI3840 test kit comes with HI3841 test kit comes with HI3842 test kit comes with
Ordering Ordering Ordering
30 mL hardness LR reagent and 30 mL hardness MR reagent and 30 mL hardness HR reagent and
Information Information 50 mL calibrated vessel. Information
50 mL calibrated vessel. 50 mL calibrated vessel.
In the HI3844 test kit, hydrogen peroxide reacts slowly with iodide Step 1: OCl¯ + 2H+ + 2I¯ → Cl¯ + I₂ + H₂O
in acid solution (Step 1); thus a 15 minute interval is required to allow
the reaction to occur completely. The amount of iodine generated is Step 2: I₂ + 2(S₂O₃)²- → 2I¯ + (S₄O₆)²-
equivalent to the hydrogen peroxide in the sample. The liberated
iodine is then titrated with standard sodium thiosulfate solution that
reduces the iodine back to iodide ions (Step 2).
Reagent HI3844-100 hydrogen peroxide, 100 tests avg. Reagent HI3843-100 hypochlorite (bleach), 100 tests avg.
* 1 gpg = 17 ppm CaCO₃
The HI3834 is a colorimetric chemical test kit that determines the total The HI38039 is a colorimetric chemical test kit that determines the
iron concentration within a 0 to 5 mg/L (ppm) range. The HI3834 is total iron concentration within a 0.00 to 1.00 mg/L (ppm) range. The
supplied with all of the necessary reagents and equipment to perform HI38039 is supplied with all of the necessary reagents and equipment
the analysis. The test kit contains enough reagents for perform to perform the analysis. The test kit contains enough reagents for
approximately 50 tests. perform approximately 100 tests.
Reagent HI3834-050 iron, 50 tests avg. Reagent HI38039-100 iron LR, 100 tests avg.
The HI38040 is a colorimetric chemical test kit that determines the The HI38041 is a colorimetric chemical test kit that determines the
total iron concentration within a 0.0 to 5.0 mg/L (ppm) range. The total iron concentration within a 0.0 to 10.0 mg/L (ppm) range. The
HI38040 is supplied with all of the necessary reagents and equipment HI38041 is supplied with all of the necessary reagents and equipment
to perform the analysis. The test kit contains enough reagents for to perform the analysis. The test kit contains enough reagents for
perform approximately 100 tests. perform approximately 100 tests.
Specifications HI38040 Iron (Fe²+ & Fe³+) Specifications HI38041 Iron (Fe²+ & Fe³+)
Type checker disc Type checker disc
Smallest Increment 0.1 mg/L (ppm) Smallest Increment 0.2 mg/L (ppm)
HI38040 test kit comes with 100 packets iron HI38041 test kit comes with 100 packets iron reagent,
Ordering Ordering
reagent, checker disc, glass vials with caps (2) and 500 mL deionized water, checker disc, glass vials with caps
Information 3 mL plastic pipette. Information (2), 3 mL plastic pipettes and long plastic pipette.
Reagent HI38040-100 iron MR, 100 tests avg. Reagent HI38041-100 iron HR, 100 tests avg.
Significance of Use
Nitrogen is abundant in the Earth’s atmosphere and is present in water
in the form of nitrate, nitrite, and ammonia. Plants use nitrogen as a
nutrient to build proteins by tracking it in through their root system.
Nitrate is formed in water mainly through rainfall, decomposition of
organic matter, and runoff from manmade pollutants such as sewage
waste and fertilizers. Almost all surface waters have a measurable
level of nitrate, and a moderate amount is considered beneficial. Large
amounts of nitrate, however, can lead to eutrophication which may
result in decreased levels of dissolved oxygen in the water.
Reagent HI3873-100 nitrite (as NO₂̄ —N), 100 tests avg. Reagent HI3810-100 dissolved oxygen, 100 tests avg.
Reagent HI38054-100 ozone, 100 tests avg. Reagent HI3833-050 phosphate, 50 tests avg.
Reagent HI38061-100 phosphate, 100 tests avg. Reagent HI3835-100 salinity, 100 tests avg.
Reagent HI38067-100 silica HR (as SiO₂), 100 tests avg. Reagent HI38000-10 sulfate, 100 tests avg.
• High resolution
• High resolution
·· Readings from 0 to 20 mg/L are determined
·· Readings from 100 to 1000 mg/L are
to 0.2 mg/L resolution.
determined to 10 mg/L resolution.
·· Readings from 0 to 200 mg/L are
·· Readings from 1000 to 10000 mg/L are
determined to 2 mg/L resolution.
determined to 100 mg/L resolution.
• Replacement reagents available
• Replacement reagents available
·· There is no need to buy a new kit when reagents
·· There is no need to buy a new kit when reagents
are exhausted. The HI3822-100 can be ordered to
are exhausted. The HI38000-10 can be ordered to
replace the reagents supplied with the kit.
replace the reagents supplied with the kit.
Significance of Use
Significance of Use
There are many reasons to monitor the concentration of sulfite in
Sulfate is widely present within natural waters in different
water. In boiler feed and effluent waters, a sulfite concentration of
concentrations. Sulfate concentration is to be kept within a strict
approximately 20 mg/L must be maintained to prevent pitting and
range for drinking water, especially since this value can be high
oxidation of metal components. A high level of sulfite results in a
near mine drainage points. Sulfate is also rigorously tested in the
lowered pH, thus promoting corrosion. The monitoring of sulfite is
production of beverages such as beer, due to its significant effect
important in environmental control as well. Sulfite ions are toxic to
upon odor and taste.
aquatic lifeforms; the chemical demand that sulfide produces on
oxygen in water can destroy the delicate ecological balance of lakes,
rivers and ponds.
Specifications HI38001 Sulfate (as SO₄²-) Specifications HI3822 Sulfite (as Na₂SO₃)
Type titration Type titration
Reagent HI38001-10 sulfate LR/HR, 100 tests avg. Reagent HI3822-100 sulfite (as Na₂SO₃), 110 tests avg.
Ordering HI3896 test kit includes 120 mL extraction solution (2), 70 mL pH indicator, 75 powder packets (25 each for N,P & K),
Information 1 mL pipettes (3), test tubes (5), test tube stand, spoon, brush, color cards (4), graduated card and handbook.
HI3895
Ordering HI3895 test kit includes 40 powder packets (10 each for pH, N, P & K), 1 mL plastic pipette, test tubes (4), color cards (4)
Information and one graduated card.
• Complete setup
·· All required materials are included
with the test kit, such as the pH
tester, sample beaker, indicator
and reagent bottles and packets,
and color comparison cube.
• High resolution
·· All tests provide a high resolution
based on the expected
range of measurement.
• Replacement reagents available
·· There is no need to buy a new kit
when reagents are exhausted.
The reagents for each parameter
can be ordered individually.
Significance of Use
Monitoring the alkalinity, chloride, hardness, phosphate, pH, and sulfite concentrations in boiler
and feedwater is essential in preventing hazardous or costly situations. These parameters are
important in determining the corrosive characteristics of water due to carbonates and chloride.
Sulfite is also critical to prevent pitting and oxidation of metal components. A high level of
sulfite results in a lowered pH, which can also promote corrosion.
Phosphate (as PO₄³-) colorimetric 0-5 mg/L (ppm) 1 mg/L (ppm) ascorbic acid 50 avg
Ordering HI3827 test kit includes all of the necessary reagents and accessories to perform over 100 tests for every parameter, with the exception of
Information phosphate, which includes reagents for 50 tests, hard carrying cases and instructions.
HI3811-100 Alkalinity (as CaCO₃), 110 tests avg. HI70004P pH 4.01 buffer solution, 20 mL sachets (25)
HI3815-100 Chloride, 110 tests avg. HI70007P pH 7.01 buffer solution, 20 mL sachets (25)
Reagents
HI3812-100 Hardness, total (as CaCO₃), 100 tests avg. HI70010P pH 10.01 buffer solution, 20 mL sachets (25)
HI3833-050 Phosphate, 50 tests avg. HI3822-100 Sulfite (as Na₂SO₃), 110 tests avg.
• Complete setup
·· All required materials are included
with the test kit, such as the dissolved
oxygen glass bottle, sample beaker,
indicator and reagent bottles and
packets, and color comparison cube.
• High resolution
·· All tests provide a high resolution
based on the expected
range of measurement.
• Replacement reagents available
·· There is no need to buy a new kit
when reagents are exhausted.
The reagents for each parameter
can be ordered individually.
Significance of Use
Corrosion can occur in many key areas of a boiler. It can shorten the life of a boiler, or at the
very least, increase the costs associated with maintaining a boiler. Corrosion can form in water
heaters, deaerators, superheater tubes, and economizers, among other places. Monitoring
the alkalinity, chloride, hardness, dissolved oxygen, phosphate, and sulfite concentrations in
cooling and boiler systems is essential in preventing hazardous or costly situations.
Phosphate (as PO₄³-) colorimetric 0-5 mg/L (ppm) 1 mg/L (ppm) ascorbic acid 50 avg
Oxygen, Dissolved titration 0.0-10.0 mg/L (ppm) 0.1 mg/L (ppm) modified Winkler 110 avg.
Ordering HI3821 test kit includes all of the necessary reagents and accessories to perform over 100 tests for every parameter, with the exception of
Information phosphate, which includes reagents for 50 tests, hard carrying case and instructions.
HI3811-100 Alkalinity (as CaCO₃), 110 tests avg. HI3833-050 Phosphate, 50 tests avg.
Reagents HI3815-100 Chloride, 110 tests avg. HI3810-100 Dissolved Oxygen, 110 tests avg.
HI3812-100 Hardness, total (as CaCO₃), 100 tests avg. HI3822-100 Sulfite (as Na₂SO₃), 110 tests avg.
9 Environmental
Monitoring Test Kit
Ideal for Professionals and Students
• Complete setup
·· All required materials are included
with the test kit, such as the pH
tester, sample beaker, indicator and
reagent bottles and packets, and
glass bottle for dissolved oxygen.
• High resolution
·· All tests provide a high resolution based
on the expected range
of measurement.
• Replacement reagents available
·· There is no need to buy a new kit
when reagents are exhausted.
The reagents for each parameter Significance of Use
can be ordered individually. The six most important parameters in environmental applications can be monitored with this
combination chemical test kit. They include: acidity, alkalinity, carbon dioxide, dissolved oxygen,
hardness, and pH. This kit is ideal not only for professionals, but also for students studying
environmental science, as it offers great performance and ease of use. HI3814 is equipped with
all the accessories and reagents to perform over 100 tests for each parameter. The pHep®, our
popular pH electronic tester, is included for your convenience. This small and easy to use pH
meter will provide more accurate and reliable pH readings than conventional litmus paper. The
pHep® also has the added benefit of introducing students to the use of a pH meter.
Oxygen, Dissolved titration 0.0-10.0 mg/L (ppm) 0.1 mg/L (ppm) modified Winkler 110 avg.
Ordering HI3814 test kit includes all of the necessary reagents and accessories to perform over 100 tests for every parameter, electronic pH tester, hard
Information carrying case and instructions.
HI3820-100 Acidity (as CaCO₃), 110 tests avg. HI3810-100 Dissolved Oxygen, 110 tests avg.
HI3811-100 Alkalinity (as CaCO₃), 110 tests avg. HI70004P pH 4.01 buffer solution, 20 mL sachets (25)
Reagents
HI3818-100 Carbon Dioxide, 110 tests avg. HI70007P pH 7.01 buffer solution, 20 mL sachets (25)
HI3812-100 Hardness, total (as CaCO₃), 100 tests avg. HI70010P pH 10.01 buffer solution, 20 mL sachets (25)
• Complete setup
·· All required materials are included
with the test kit, such as the pH
tester, sample beaker, indicator and
reagent bottles and packets, and
glass bottle for dissolved oxygen.
• High resolution
·· All tests provide a high resolution
based on the expected
range of measurement.
• Replacement reagents available
·· There is no need to buy a new kit
when reagents are exhausted.
The reagents for each parameter
can be ordered individually.
Oxygen, Dissolved titration 0.0-10.0 mg/L (ppm) 0.1 mg/L (ppm) modified Winkler 110 avg.
Salinity titration 0.0-40.0 g/kg 0.4 g/kg mercuric nitrate 110 avg.
Ordering HI3823 test kit includes all reagents and accessories necessary to perform over 100 tests for each parameter, electronic pH tester, hard carrying
Information case and instructions.
HI3811-100 Alkalinity (as CaCO₃), 110 tests avg. HI70004P pH 4.01 buffer solution, 20 mL sachets (25)
HI3818-100 Carbon Dioxide, 110 tests avg. HI70007P pH 7.01 buffer solution, 20 mL sachets (25)
Reagents
HI3812-100 Hardness, total (as CaCO₃), 100 tests avg. HI70010P pH 10.01 buffer solution, 20 mL sachets (25)
HI3810-100 Dissolved Oxygen, 110 tests avg. HI3835-100 Salinity, 100 tests avg.
HI3887
The HI3887 is a colorimetric chemical test kit that determines the free hypochlorite, or in some instances, chlorine gas. When added to water,
chlorine concentration and pH level in samples within a 0.0 to 2.5 mg/L chlorine creates hypochlorous acid (HOCl) which dissociates into
(ppm) Cl¯ range and 6.0 to 8.5 pH range. The HI3887 is supplied with all hypochlorite ion (OCl¯).
of the necessary reagents and equipment to perform the analysis. The
HOCl ↔ H+ + OCl¯
test kit contains enough reagents for perform approximately 50 tests
for free chlorine and 100 tests for pH.
hypochlorous acid ↔ hydrogen ion + hypochlorite ion
• Complete setup HOCl is the form of chlorine that acts as a stronger disinfectant
·· All required materials are included with the test kit, such as as compared to OCl¯. To ensure the added chlorine is effective at
the color comparison cubes and reagent dropper bottles. sanitizing, the pH of the water must be taken into account. Around pH
• High resolution 7.5, HOCl and OCl¯ are present in relatively equal amounts. Below pH
·· Free chlorine readings from 0.0 to 2.5 mg/L 7.5, the equilibrium shifts to favor HOCl; above pH 7.5, the equilibrium
are determined to 0.5 mg/L resolution. shifts to favor OCl¯. Depending on the application, addition of chlorine
is effective when added to water with a neutral or slightly acidic pH
·· pH readings from 6.0 to 8.5 pH are
value.
determined to 0.5 pH resolution.
When chlorine is first added to water, it is available as free chlorine.
Significance of Use
The measurement of free chlorine signifies the amount available for
Chlorine is one of the most commonly used disinfectants for drinking disinfection. Once chlorine begins to sanitize bacteria and pathogens
water, wastewater, and water used for pools and spas. It can be present in the water, it becomes combined chlorine; combined chlorine
added to in various forms including calcium hypochlorite, sodium is no longer available to act as a disinfectant.
Ordering
HI3887 test kit includes color comparison cubes (2), 20 mL reagent 1, 12 mL reagent 2, 25 mL pH reagent and instructions.
Information
Reagents HI3831F-050 free chlorine, 50 tests avg.
Ordering HI3817 test kit includes all of the necessary reagents and accessories to perform over 100 tests for every parameter, with the exception of
Information iron, which include reagents for 50 tests, electronic pH tester, hard carrying case and instructions.
HI3811-100 Alkalinity (as CaCO₃), 110 tests avg. HI70004P pH 4.01 buffer solution, 20 mL sachets (25)
HI3815-100 Chloride, 110 tests avg. HI70007P pH 7.01 buffer solution, 20 mL sachets (25)
Reagents
HI3812-100 Hardness, total (as CaCO₃), 100 tests avg. HI70010P pH 10.01 buffer solution, 20 mL sachets (25)
HI3834-050 iron, 50 tests avg. HI3822-100 Sulfite (as Na₂SO₃), 110 tests avg.
backpacklab.com
Chemical Test Kits
Backpack Lab
A Classroom in a Backpack!
9.38 | www.hannainst.com
HI3817BP
• 110 tests each for acidity and alkalinity, 100 tests for carbon
dioxide, dissolved oxygen, hardness, nitrate and phosphate Hanna offers a series of test kits specifically designed for educators
and environmental science students. These portable kits contain well-
• Hanna's HI98129 Combo pH/EC/TDS/temperature tester
constructed lessons and activities, and will allow the teacher to get the
• Secchi disk for turbidity most out of their classroom time.
• Backpack carrying case which holds all components of the kit
Backpack Lab is designed with all the necessary components in one
• Teacher’s manual with a curriculum that meets place, reducing the chance of misplacing an item. Ideal for transporting,
Backpack Lab
Oxygen, Dissolved titration 0.0-10.0 mg/L (ppm) modified Winkler 110 avg. HI3810
Nitrate (NO₃̄—N) colorimetric 0-50 mg/L (ppm) cadmium reduction 100 HI3874
Conductivity 0 to 3999 µS/cm 1 µS/cm ±2% F.S. automatic, one point at 1413 µS/cm
TDS 0 to 2000 mg/L (ppm) 1 mg/L (ppm) ±2% F.S. automatic, one point at 1382 mg/L (ppm)
0.0 to 60.0°C /
Temperature 0.1°C / 0.1°F ±0.5°C /±1°F —
32.0 to 140.0°F
HI3817BP Backpack Lab includes HI98129 Combo pH/EC/TDS/temperature tester, acidity test kit, alkalinity test kit, carbon dioxide test kit,
Ordering
dissolved oxygen test kit, hardness test kit, nitrate test kit, phosphate test kit, set of 10 field test procedures, teacher's resource CD, teacher's
Information guide and backpack.
HI3820-100 Acidity (as CaCO₃), 110 tests avg. HI3833-050 Phosphate, 50 tests avg.
HI3811-100 Alkalinity (as CaCO₃), 110 tests avg. HI70004P pH 4.01 buffer solution for HI98129, 20 mL sachets (25)
Reagents and HI3818-100 Carbon Dioxide, 110 tests avg. HI70007P pH 7.01 buffer solution for HI98129, 20 mL sachets (25)
Solutions only HI3810-100 Dissolved Oxygen, 110 tests avg. HI70010P pH 10.01 buffer solution for HI98129, 20 mL sachets (25)
HI3812-100 Hardness, total (as CaCO₃), 100 tests avg. HI70031P 1413 µS/cm conductivity calibration solution for HI98129, 20 mL sachets (25)
HI3874-100 nitrate (as NO₃̄—N), 100 tests avg. HI70032P 1382 mg/L (ppm) TDS calibration solution for HI98129, 20 mL sachets (25)
backpacklab.com
Chemical Test Kits
Backpack Lab
A Classroom in a Backpack!
9.40 | www.hannainst.com
HI3896BP
Backpack Lab
pH colorimetric 4 to 9 pH (1 pH increments) pH indicators 25 HI3896-025
Conductivity 0 to 3999 µS/cm 1 µS/cm ±2% F.S. automatic, one point at 1413 µS/cm
TDS 0 to 2000 mg/L (ppm) 1 mg/L (ppm) ±2% F.S. automatic, one point at 1382 mg/L (ppm)
0.0 to 60.0°C /
Temperature 0.1°C / 0.1°F ±0.5°C /±1°F —
32.0 to 140.0°F
Ordering HI3896BP Backpack Lab test kit includes agriculture test kit pro, HI98129 Combo pH/EC/TDS/temperature tester, HI145 digital thermometer,
Information set of 6 field test procedures, teacher's resource CD, teacher's guide and backpack
Reagents and HI70007P pH 7.01 buffer solution for HI98129, 20 mL sachets (25)
Solutions only HI70010P pH 10.01 buffer solution for HI98129, 20 mL sachets (25)
HI70031P 1413 µS/cm conductivity calibration solution for HI98129, 20 mL sachets (25)
HI70032P 1382 mg/L (ppm) TDS calibration solution for HI98129, 20 mL sachets (25)
backpacklab.com
Chemical Test Kits
Backpack Lab
A Classroom in a Backpack!
9.42 | www.hannainst.com
HI3899BP
Oxygen, Dissolved titration 0.0-10.0 mg/L (ppm) modified Winkler 110 avg. HI3810
Backpack Lab®
Nitrite colorimetric 0.0-1.0 mg/L (ppm) chromotropic acid 100 HI3873
Nitrate (NO₃̄—N) colorimetric 0-50 mg/L (ppm) cadmium reduction 100 HI3874
Conductivity 0 to 3999 µS/cm 1 µS/cm ±2% F.S. automatic, one point at 1413 µS/cm
TDS 0 to 2000 mg/L (ppm) 1 mg/L (ppm) ±2% F.S. automatic, one point at 1382 mg/L (ppm)
0.0 to 60.0°C /
Temperature 0.1°C / 0.1°F ±0.5°C /±1°F —
32.0 to 140.0°F
HI3899BP Backpack Lab includes acidity test kit, alkalinity test kit, carbon dioxide test kit, ammonia test kit, dissolved oxygen test kit,
Ordering
nitrate test kit, nitrite test kit, phosphate test kit, salinity test kit, secchi disc, hydrometer, HI98129 Combo pH/EC/TDS/temperature tester,
Information set of 6 field test procedures, teacher's resource CD, teacher's guide and backpack.
HI3820-100 Acidity (as CaCO₃), 110 tests avg. HI3833-050 Phosphate, 50 tests avg.
HI3811-100 Alkalinity (as CaCO₃), 110 tests avg. HI3835-100 salinity, 100 tests avg.
HI3826-025 Ammonia, seawater (as NH₃-N), 25 tests avg. HI70004P pH 4.01 buffer solution for HI98129, 20 mL sachets (25)
Reagents and
HI3818-100 Carbon Dioxide, 110 tests avg. HI70007P pH 7.01 buffer solution for HI98129, 20 mL sachets (25)
Solutions only
HI3810-100 Dissolved Oxygen, 110 tests avg. HI70010P pH 10.01 buffer solution for HI98129, 20 mL sachets (25)
HI3874-100 nitrate (as NO₃̄—N), 100 tests avg. HI70031P 1413 µS/cm conductivity calibration solution for HI98129, 20 mL sachets (25)
HI3873-100 nitrite (as NO₂̄ —N), 100 tests avg. HI70032P 1382 mg/L (ppm) TDS calibration solution for HI98129, 20 mL sachets (25)
CTK Code Test Kit Parameter Chemical Method Reagent Code # Tests
HI3810 Dissolved Oxygen Winkler HI3810-100 110 avg.
HI3812 Hardness, total (as CaCO₃) EDTA titration HI3812-100 100 avg.
HI3824 Ammonia (fresh water) (as NH₃—N) Nessler colorimetric HI3824-025 25 avg.
9.44 | www.hannainst.com
Chemical Test Kit Reagents 9
CTK Code Test Kit Parameter Chemical Method Reagent Code # Tests
HI3829F Chlorine, free DPD colorimetric HI3829F-050 50 avg
pH pH indicators HI3895-010 10
reagents
Potassium tetraphenylborate HI3896-025 25
pH pH indicators HI3896-025 25
pH pH indicators HI3896-025 25
www.hannainst.com | 9.45
9 Chemical Test Kit Reagents
CTK Code Test Kit Parameter Chemical Method Reagent Code # Tests
Dissolved Oxygen Winkler HI3810-100 110 avg
phenolphthalein/bromphenol
Alkalinity (as CaCO₃) HI3811-100 110 avg.
blue
HI38050 Nitrate (soil + irrigation) (as NO₃̄—N) cadmium reduction HI38050-200 200
9.46 | www.hannainst.com
Table of Contents 10
Photometers
Introduction������������������������ 10.2 Reagents��������������������������10.90
table of contents
Product Spotlights������������������������������������������� 10.4 Standard Reagents��������������������������������������� 10.90
Comparison Guides������������������������������������������ 10.6 CAL Check™ Kits���������������������������������������������10.91
Portable����������������������������� 10.42
Introduction ���������������������������������������������������� 10.42
Single Parameter �������������������������������������������10.43
Multi-Parameter ��������������������������������������������10.77
Light
Source
Photometers
Glass Prism
In simple terms, colors are dependent on light. We do not actually see 10-9
colors rather, what we see as color is the effect of light shining on an
object. When white light shines on an object, it may be reflected,
absorbed, or transmitted. Glass transmits most of the light that comes 500 Ultraviolet 10-7
into contact with it, thus it appears colorless. Snow reflects all of the Visible Light
Wavelength (m)
Visible Region
light and appears white. A black cloth absorbs all light, and so appears 10-5
Visible Region
black. A red piece of paper reflects red light better than it reflects other Infrared
colors. Most objects appear colored because their chemical structure
10-3
absorbs certain wavelengths of light and reflects others. 600
When discussing light, we are usually referring to white light. A thin line 10-1
of light is called a ray; a beam is made up of many rays of light. When
white light passes through a prism (a triangular transparent object) the
colors that make up white light disperse into seven bands of color. These 101
700
introduction
bands of color are called a spectrum. Seven colors constitute white light:
red, orange, yellow, green, blue, indigo, and violet. In any spectrum, the 103
bands of color are always organized in this order from left to right. 750 nm
Green Purple
495 A colorimetric analysis is based on the principle that many
substances react with each other and form a color which can
Yellow Blue
560 indicate the concentration of the substance to be measured. When
a substance is exposed to a beam of light of intensity (I₀) a portion
Orange Greenish blue
650 of the radiation is absorbed by the substance’s molecules and a
Red Bluish green radiation of intensity (I) is emitted. This difference in intensity is
800
used for the colorimetric determination.
10.2 | www.hannainst.com
Introduction 10
The quantity of radiation absorbed is given by the Supposing that for one chemical substance there is a maximum
Beer-Lambert Law: A = log Io absorbance at 610 nm. With the following graphs, you have one example
—
I of how the colorimeters are working to determine concentration:
Absorbance is also given by: A= ελ • C • l where:
A is a dimensionless number
ελ
the proportionality constant, is called the molar
extinction coefficient or molar absorptivity; it is a constant
for a given substance, provided the temperature and
Photometers
wavelength are constant [L/(mol•cm)]
introduction
Sources of light used by Hanna colorimeters:
Tungsten lamp an incandescent lamp having a tungsten filament
One example of an early colorimetric analysis is Nessler’s
LED light emitting diode method for ammonia, which was first proposed in 1856. Nessler
found that adding an alkaline solution of HgI2 and KI
The optical distance is measured by the dimension of the cuvette to a dilute solution of ammonia produced a yellow
containing the sample. The photoelectric cell collects the radiation to reddish brown colloid with the color intensity
(I) emitted by the sample and converts it into an electric current, proportional to the concentration of ammonia
producing a potential in the mV range. The microprocessor uses this present. A comparison of the samples color for
a series of standards was used to determine
potential to convert the incoming value into the desired measuring
the concentration of ammonia. Equal volumes
unit and display it on the LCD.
of the sample and standards were transferred
In fact, the preparation of the solution to be measured occurs to a set of tubes with flat bottoms. The tubes
under known conditions, which are programmed into the meters were placed in a rack equipped at the bottom
with a reflecting surface, allowing light to pass
microprocessor in the form of a calibration curve. This curve is used
through the solution. The colors of the samples
as a reference for each measurement. It is then possible to determine
and standards were compared by looking down
unknown concentrations of a sample by using a colorimetric reaction
through the solutions. A modified form of this
and the mV signal separated by a sensor in relation to the emitted
method is used for the analysis of ammonia in
intensity (I) (the color of the sample). By employing the calibration curve,
water and wastewater.
one can determine the concentration of the sample that corresponds to
the mV value.
www.hannainst.com | 10.3
10 Product Spotlights
HI801 iris
Spectrophotometer
with split beam optical system, customizable methods and
rechargeable battery
HI83300
Multiparameter Photometer
with Digital pH Electrode Input for Laboratories
for performance verification and for users that would like to develop
their own concentration versus absorbance curves.
HI83303
Multiparameter Photometer
with Digital pH Electrode Input for Aquaculture
10.4 | www.hannainst.com
Product Spotlights 10
HI96785
Photometers
cuvette is inserted into the measurement cell in the same position every
time to maintain a consistent path 10 mm path length.
The HI755, HI775 and HI772 Checker®HC’s are simple, accurate, and
cost effective ways to measure alkalinity in seawater and fresh water.
Designed as a more accurate alternative to chemical test kits, these
handheld colorimeters provide quick, accurate alkalinity testing results
in four easy steps.
product spotlights
See page 10.99
HI759
www.hannainst.com | 10.5
10 Multiparameter Benchtop Photometers Comparison Guide
Boilers/Cooling
Environmental
Conditioning
Aquaculture
Laboratory
Pools and
HI83308
HI83306
HI83300
HI83305
HI83326
HI83303
HI83325
Nutrient
Analysis
Analysis
Towers
Water
Spas
Parameter
Alkalinity • • •
Alkalinity, Marine • •
Aluminum • •
Ammonia Low Range • • • • • •
Ammonia Medium Range • • • • • •
Ammonia High Range • • • • • •
Bromine • • •
Calcium • • •
Photometers
Calcium, Marine • •
Chloride •
Chlorine Dioxide • •
Chlorine, Free • • • • • •
Chlorine, Free Ultra Low Range •
Chlorine, Total • • • • • •
Chlorine, Total Ultra Low Range •
Chlorine, Total Ultra High Range •
Chromium(VI) Low Range • • •
Chromium(VI) High Range • • •
Color of Water • •
Copper Low Range • • • • •
Copper High Range • • • • • •
Cyanuric Acid • • •
Fluoride Low Range • •
Fluoride High Range •
Hardness, Calcium • •
Hardness, Magnesium •
Hardness, Total Low Range •
Hardness, Total Medium Range •
Hardness, Total High Range •
Hydrazine • •
Iodine •
Iron Low Range • • •
Iron High Range • • • •
Magnesium • •
introduction
10.6 | www.hannainst.com
Multiparameter Portable Photometers Comparison Guides 10
HI96734
HI96736
HI96104
HI96724
HI96725
HI96742
HI96752
HI96710
HI96745
HI96771
HI96101
HI96741
HI96711
Bromine •
Calcium HR •
Chlorine, Free • • • • • • • •
Chlorine, Free HR •
Chlorine, Total • • • • • • •
Chlorine, Total HR •
Photometers
Cyanuric Acid • • •
Hardness, Ca • • •
Hardness, Mg • • •
Hardness, Total • • •
Iodine •
Iron LR • • • •
Magnesium HR •
Manganese LR •
pH • • • • • •
Page 10.77 10.78 10.80 10.81 10.82 10.79 10.83 10.85 10.86 10.87 10.88 10.89 10.84
Ammonia HR HI96733 10.44 Cyanuric Acid HI96722 10.55 Nickel LR HI96740 10.66
Ammonia MR HI96715 10.44 Fluoride HR HI96739 10.56 Nitrate, as Nitrogen HI96728 10.67
introduction
Ammonia LR HI96700 10.44 Fluoride LR HI96729 10.56 Nitrate HI96786 10.67
Anionic Surfactants HI96769 10.45 Hardness, Ca HI96720 10.57 Nitrite HR HI96708 10.68
Chloride HI96753 10.47 Hardness, EPA HI96735 10.58 Oxygen, Dissolved HI96732 10.69
Chlorine Dioxide HI96738 10.48 Honey Color HI96785 10.59 Phosphate HR HI96717 10.70
Chlorine, Free HI96701 10.49 Hydrazine HI96704 10.60 Phosphate LR HI96713 10.70
Chlorine, Free ULR HI96762 10.49 Iodine HI96718 10.61 Phosphorus HI96706 10.71
Chlorine, Total ULR HI96761 10.50 Iron HR HI96721 10.62 Potassium HI96750 10.72
Color of Water HI96727 10.52 Manganese LR HI96748 10.63 Silver HI96737 10.74
Copper LR HI96747 10.53 Maple Syrup HI96759 10.64 Sulfate HI96751 10.75
www.hannainst.com | 10.7
iris Spectrophotometer
10.8
Photometers
10
| www.hannainst.com
10
Spectrophotometer
with split beam optical system, customizable methods and
rechargeable battery
Photometers
created in the past. It is different from our photometers as it allows
for measurement in the spectrum of all wavelengths of visible light
and not just pre–specified wavelengths. Spectrophotometers work by
isolating light at specific wavelengths from white light. This compact
meter incorporates a number of features that facilitate both fantastic
performance and exceptional usability.
iris Spectrophotometer
www.hannainst.com | 10.9
10
Photometers
Advanced Split–beam
Optical System
iris Spectrophotometer
10.10 | www.hannainst.com
10
System Check
Photometers
Upon turning on the meter a performance
check occurs to confirm that the light
source is working properly and to calibrate
the position of the grating. The grating
calibration works by scanning for the “zero
order” light reflecting off the grating. If any
mechanical problems are present, the meter
will display an alert. This feature establishes
confidence in measurements knowing that
the meter is always working properly without
needing to run any additional tests.
Concave grating
This element of the optical system is what generates the spectrum of light. When the
light from the tungsten lamp hits the grating it is met with interference coatings that
iris Spectrophotometer
turn the polychromatic white light into a rainbow. This rainbow contains dispersed light
at all wavelengths in the visible spectrum. The rotation of this grating is what allows for a
specific wavelength to be selected. This ability is one of the biggest differences between
a spectrophotometer and a photometer. The concave grating which accomplishes this is
superior to other types of diffraction, such as prisms, as it minimizes stray light generated
and has constant bandwidth. It also combines elements of the optical system that would
typically be separate, for example if a flat grating was used a concave mirror would need to Universal Cuvette Holder
be added in order to refocus the light. The combination of these two pieces creates greater and Auto–Recognition
efficiency and a smaller optical system to yield a more compact portable meter.
The cuvette holder built into the meter holds
both 22 mm round cuvettes and rectangular
Narrow Bandwidth and Low stray light cuvettes with a 5cm path length. Adapters for
High Resolution A common problem in spectrophotometers the cuvette holder are available to hold other
is stray light. Stray light can be light which 13 and 16mm round cuvettes, and 10mm
Having a small bandwidth is necessary
is outside the wavelength the meter square cuvettes. Rectangular cuvettes have
to accurately measure narrow peaks. is measuring or also light at the proper longer path lengths which result in higher
The iris spectrophotometer maintains a wavelength but from outside the meter. sensitivity in readings of low absorbance
narrow bandwidth of 5nm resulting in good This leads to inaccurate readings as this light samples. Additionally, the meter permits the
spectral resolution. This leads to accurate would not be absorbed by the sample but selection of the size of the cuvette used in
would still be detected by the meter. This custom user methods from the available sizes.
measurement of sharp, narrow absorbance
is a problem that is typically hard to control. For all methods, the programmed cuvette
peaks. Additionally, the high resolution of
Due to the design of the optical system size is displayed on the screen to ensure the
1nm generates greater sensitivity as the we are able to keep this potential issue to correct cuvette size is used, ensuring that the
wavelength is closer to where the sample a minimum to improve the linearity and proper path length is being used by the meter
absorbs the most light. accuracy of readings. when calculating measurements.
www.hannainst.com | 10.11
iris Spectrophotometer Photometers
10.12
10
| www.hannainst.com
Customized Methods
• Step–By–Step Method Creation
10
• Up to 10 calibration points
• Flexible calculations for multi
wavelength methods
Creating a customized method is easy and
intuitive. The HI801 guides you step–by–step
through the process of creating your own
custom method. The intuitive user interface
will guide you through naming your method,
setting the measurement wavelengths,
creating reaction timers, and calibrating
the method. Up to 10 points can be used to
Photometers
calibrate methods.
User Interface
No one likes to work with difficult equipment,
which is why we have worked hard to
create an interface that makes the meter’s
operation seamless. The intuitive menu
design and large LCD screen all make working
with the meter a breeze. Get ready for your
new favorite piece of lab equipment.
Favorite Methods
Always have your most frequently used
methods readily available with the favorite
methods feature. Directly from the home
screen is access to user–programmed
favorite methods, saving time.
iris Spectrophotometer
LCD display
With a 6” display, the screen is large and
easy to read. The high contrast makes every
character on the display stand out even
during outdoor use. The wide viewing angle
allows for measurements to be seen from far
away, so while working around the lab it is not
necessary to hover over the meter to see the
measurements.
Capacitive touchpad
Maneuvering the menus and using the meter
is effortless with the capacitive touchpad.
Featuring dedicated buttons specifically
for setup, logging data, recalling data, and
methods allows for quick and easy access
to these functions. There is a key beep
feature that can be enabled or disabled, for
audible feedback that the key was pressed.
Additionally, the meter also still recognizes
key touches even through gloves.
www.hannainst.com | 10.13
General Features
10 When choosing a piece of equipment making
sure the product has all required features
for the intended purposes is critical. When
building the iris we included as many features
as we could to aid in making this meter
exceedingly versatile and convenient. From
bare necessities such as long battery life
and easy data logging and transfer, we have
pushed the limits on seemingly basic features
to make your life as easy as possible.
10.14 | www.hannainst.com
Cuvette Adapters
10
Photometers
General Specifications HI801 iris
Wavelength Range 340-900 nm
Wavelength Resolution 1 nm
iris Spectrophotometer
Wavelength Accuracy ±1.5 nm
Wavelength Selection automatic, based on the selected method (editable for user methods only)
Spectral Bandwidth 5 nm
Power Supply 15 VDC power adapter; 10.8 VDC Li-Ion rechargeable battery
Ordering HI801–01 (115V) and HI801–02 (230V) is supplied with sample cuvettes and Caps (22 mm, 4 pcs.), cloth for wiping cuvettes, scissors,
Information USB cable, USB flash drive, 15 VDC power adapter, instruction manual and instrument quality certificate.
www.hannainst.com | 10.15
HI801 iris Parameter Specifications
Alkalinity 0–500 mg/L CaCO₃ ±5 mg/L ±5% of reading Bromocresol green 610 HI775–26 R–22
Alkalinity, Marine 0–300 mg/L CaCO₃ ±5 mg/L ±5% of reading Bromocresol green 610 HI755–26 R–22
Aluminum 0.00–1.00 mg/L Al3+ ±0.02 mg/L ±4% of reading Aluminon 530 HI93712–01 R–22
Ammonia LR 0.00–3.00 mg/L NH₃–N ±0.04 mg/L ±4% of reading Nessler 425 HI93700–01 R–16
Ammonia LR 0.00–3.00 mg/L NH₃–N ±0.10 mg/L or 5% of reading Nessler 425 HI93764A–25 R–13
Ammonia MR 0.00–10.00 mg/L NH₃–N ±0.05 mg/L ±5% of reading Nessler 425 HI93715–01 R–16
Ammonia HR 0.0–100 mg/L NH₄+ ±0.5 mg/L ±5% of reading Nessler 425 HI93733–01 R–16
Ammonia HR 0.0–100 mg/L NH₃–N ±1 mg/L or 5% of reading Nessler 430 HI93764B–25 R–13
Bromine 0.00–10.00 mg/L (mg/L) ±0.08 mg/L ±3% of reading DPD 525 HI93716–01 R–22
Calcium 0–400 mg/L Ca²+ ±10 mg/L ±5% of reading Oxalate 466 HI937521–01 R–22
Photometers
Calcium, Marine 200–600 mg/L Ca²+ ±5% of reading Zincon 610 HI758–26 R–16
Chloride 0.0–20.0 mg/L Cl¯ ±0.5 mg/L ±5% of reading Mercury thiocyanate 455 HI93753–01 R–22
Chlorine Dioxide 0.00–2.00 mg/L ClO₂ ±0.10 mg/L ±5% of reading Chlorophenol Red 575 HI93738–01 R–22
Chlorine Free ULR 0.000–0.500 mg/L Cl₂ ±0.020 mg/L ±3% of reading DPD 525 HI95762–01 R–22
Chlorine, Free LR 0.00–5.00 mg/L Cl₂ ±0.03 mg/L ±3% of reading DPD 525 HI93701–01 R–22
(powder reagent)
Chlorine, Free LR 0.00–5.00 mg/L Cl₂ ±0.03 mg/L ±3% of reading DPD 525 HI93701–F R–22
(liquid reagent)
Chlorine, Free HR 0.00–10.00 mg/L Cl₂ ±0.03 mg/L ±3% of reading DPD 525 HI93734–01 R–22
Chlorine, Total ULR 0.000–0.500 mg/L Cl₂ ±0.020 mg/L ±3% of reading DPD 525 HI95761–01 R–22
Chlorine, Total LR 0.00–5.00 mg/L Cl₂ ±0.03 mg/L ±3% of reading DPD 525 HI93711–01 R–22
(powder reagent)
Chlorine, Total LR 0.00–5.00 mg/L Cl₂ ±0.03 mg/L ±3% of reading DPD 525 HI93701–T R–22
(liquid reagent)
Chlorine, Total HR 0.00–10.00 mg/L Cl₂ ±0.03 mg/L ±3% of reading DPD 525 HI93734–01 R–22
Chlorine UHR 0–500 mg/L Cl₂ ±3 mg/L ±3% of reading DPD 525 HI95771–01 R–22
Chromium(VI) LR 0–300 µg/L Cr⁶+ ±2 µg/L ±4% of reading Diphenylcarbohydrazide 535 HI93749–01 R–22
Chromium(VI) HR 0–1000 µg/L Cr⁶+ ±5 µg/L ±4% of reading Diphenylcarbohydrazide 535 HI93723–01 R–22
iris Spectrophotometer
COD LR EPA 0–150 mg/L O₂ ±5 mg/L or 5% of reading Dichromate EPA 420 HI93754A–25 R–13
COD LR Hg free 0–150 mg/L O₂ ±5 mg/L or 5% of reading Dichromate EPA 420 HI93754D–25 R–13
COD LR ISO 0–150 mg/L O₂ ±5 mg/L or 5% of reading Dichromate ISO 420 HI93754F–25 R–13
COD MR EPA 0–1500 mg/L O₂ ±15 mg/L or 4% of reading Dichromate EPA 610 HI93754B–25 R–13
COD MR Hg free 0–1500 mg/L O₂ ±15 mg/L or 4% of reading Dichromate EPA 610 HI93754E–25 R–13
COD MR ISO 0–1500 mg/L O₂ ±15 mg/L or 4% of reading Dichromate ISO 610 HI93754G–25 R–13
COD HR EPA 0–15000 mg/L O₂ ±150 mg/L or 2% of reading Dichromate EPA 610 HI93754C–25 R–13
Color of Water 0–500 PCU ±10 PCU ±5% of reading Platinum Cobalt 460 R–22
Copper LR 0–1500 µg/L Cu²+ ±10 µg/L ±5% of reading Bicinchoninate 575 HI95747–01 R–22
Copper HR 0.00–5.00 mg/L Cu²+ ±0.02 mg/L or 4% of reading Bicinchoninate 560 HI93702–01 R–22
Cyanide 0.000–0.200 mg/L CN¯ ±0.005 mg/L ±3% of reading Pyridine–Pyrazalone 610 HI93714–01 R–22
Cyanuric Acid 0–100 mg/L CYA ±1 mg/L ±15% of reading SPADNS 525 HI93722–01 R–22
Fluoride LR 0.00–2.00 mg/L F¯ ±0.03 mg/L ±3% of reading SPADNS 575 HI93729–01 R–22
Fluoride HR 0.0–20.0 mg/L F¯ ±0.5 mg/L ±3% of reading SPADNS 575 HI93739–01 R–22
Hardness Calcium 0.00–2.70 mg/L CaCO₃ ±0.08mg/L ±4% of reading Calmagite 523 HI93720–01 R–22
Hardness Magnesium 0.00–2.00 mg/L CaCO₃ ±0.11 mg/L ±5% of reading EDTA 523 HI93719–01 R–22
Hardness Total LR 0–250 mg/L CaCO₃ ±5 mg/L ±4% of reading Calmagite 466 HI93735–00 R–22
Hardness Total MR 200–500 mg/L CaCO₃ ±7 mg/L ±3% of reading Calmagite 466 HI93735–01 R–22
Hardness Total HR 400–750 mg/L CaCO₃ ±10 mg/L ±2% of reading Calmagite 466 HI93735–02 R–22
Hydrazine 0–400 µg/L N₂H₄ ±3 µg/L ±3% of reading Dimethylaminobenzaldehyde 466 HI93704–01 R–22
Iodine 0.0–12.5 mg/L I₂ ±0.1 mg/L ±5% of reading DPD 525 HI93718–01 R–22
Iron LR 0.00–1.60 mg/L Fe ±0.01 mg/L ±8% of reading TPTZ 575 HI93746–01 R–22
10.16 | www.hannainst.com
Parameter Range Accuracy (@25°C) Method λ (nm) Reagent Cuvette 10
Iron HR 0.00–5.00 mg/L Fe ±0.04 mg/L ±2% of reading Phenanthroline 525 HI93721–01 R–22
Magnesium 0–150 mg/L Mg²+ ±3 mg/L ±3% of reading Calmagite 466 HI937520–01 R–22
Manganese LR 0–300 µg/L Mn ±7 µg/L ±3% of reading PAN 560 HI93748–01 R–22
Manganese HR 0.0–20.0 mg/L Mn ±0.2 mg/L ±3% of reading Periodate 525 HI93709–01 R–22
Maple Syrup 0.0–100.0%T ±3% @75 %T Direct measure 560 HI93703–57 S–10
Molybdenum 0.0–40.0 mg/L Mo⁶+ ±0.3 mg/L ±5% of reading Mercaptoacetic acid 420 HI93730–01 R–22
Nickel LR 0.000–1.000 mg/L Ni ±0.010 mg/L ±7% of reading PAN 565 HI93740–01 R–16
Nickel HR 0.00–7.00 ppt Ni ±0.07 ppt ±4% of reading photometric 575 HI93726–01 R–22
Nitrate 0.0–30.0 mg/L N–NO₃ ±0.5 mg/L ±10% of reading Cadmium reduction 525 HI93728–01 R–22
Nitrate 0.0–30.0 mg/L N–NO₃ ±1.0 mg/L ±3% of reading Chromotropic acid 410 HI93766–50 R–13
Photometers
(Chromotropic acid)
Nitrite Marine ULR 0–200 µg/L N–NO₂ ±8 µg/L ±4% of reading Diazotization 480 HI764–25 R–22
Nitrite LR 0–600 µg/L N–NO₂ 10 µg/L ±4% of reading Diazotization 480 HI93707–01 R–22
Nitrite HR 0–150 mg/L N–NO₂ ±4 mg/L ±4% of reading Ferrous sulfate 575 HI93708–01 R–22
Nitrogen Total LR 0.0–25.0 mg/L N ±1 mg/L or 5% of reading Chromotropic acid 420 HI93767A–50 R–13
Nitrogen Total HR 10–150 mg/L N ±3 mg/L or 4% of reading Chromotropic acid 420 HI93767B–50 R–13
Oxygen Dissolved 0.0–10.0 mg/L O₂ ±0.4 mg/L ±3% of reading Winkler 466 HI93732–01 R–22
Oxygen Scavengers 0.00–1.50 mg/L ±0.02 mg/L ±3% of reading Iron reduction 575nm HI96773–01 R–22
(Carbohydrazide)
Oxygen Scavengers 0–1000 µg/L ±5 µg/L ±5% of reading Iron reduction 575nm HI96773–01 R–22
(DEHA)
Oxygen Scavengers 0.00–4.50 mg/L ±0.03 mg/L ±3% of reading Iron reduction 575nm HI96773–01 R–22
(ISO–Ascorbic Acid)
Oxygen Scavengers 0.00–2.50 mg/L ±0.04 mg/L ±3% of reading Iron reduction 575nm HI96773–01 R–22
(Hydroquinone)
Ozone 0.00–2.00 mg/L O₃ ±0.02 mg/L ±3% of reading DPD 525 HI93757–01 R–22
Phosphorus Marine ULR 0–200 µg/L P ±5 µg/L ±5% of reading Ascorbic acid 610 HI736–25 R–22
iris Spectrophotometer
Phosphate LR 0.00–2.50 mg/L PO₄³- ±0.04 mg/L ±4% of reading Ascorbic Acid 610 HI93713–01 R–22
Phosphate HR 0.0–30.0 mg/L PO₄³- ±1 mg/L ±4% of reading Amino Acid 525 HI93717 –01 R–22
Phosphorus Acid 0.00–1.60 mg/L P ±0.05 mg/L or 5% of reading Ascorbic acid 610 HI93758B–50 R–13
Hydrolyzable
Phosphorus , Reactive LR 0.00–1.60 mg/L P ±0.05 mg/L or 4% of reading Ascorbic acid 610 HI93758A–50 R–13
Phosphorus , Reactive HR 0.0–32.6 mg/L P ±0.5 mg/L or 4% of reading Vanadomolybdophosphoric 420 HI93763A–50 R–13
acid
Phosphorous, Total LR 0.00–1.60 mg/L P ±0.05 mg/L or 5% of reading Adenosine 5'– 610 HI93758C–50 R–13
monophosphate
monohidrat
Phosphorous, Total HR 0.0–32.6 mg/L P ±0.5 mg/L or 5% of reading Adenosine 5’– 420 HI93763B–50 R–13
monophosphate
monohidrat
Potassium LR 0.0–20.0 mg/L K 2 mg/L ±7% of reading Turbidimetric 466 HI93750–01 R–22
tetraphenylborate
Potassium MR 10–100 mg/L K ±10 mg/L ±7% of reading Turbidimetric 466 HI93750–01 R–22
tetraphenylborate
Potassium HR 20–200 mg/L K ±20 mg/L ±7% of reading Turbidimetric 466 HI93750–01 R–22
tetraphenylborate
Silica LR 0.00–2.00 mg/L SiO₂ ±0.03 mg/L ±5% of reading Heteropoly Blue 610 HI93705–01 R–22
Silica HR 0–200 mg/L SiO₂ ±1 mg/L ±5% of reading Molybdosilicate 466 HI96770–01 R–22
Silver 0.000–1.000 mg/L Ag ±0.02 mg/L ±5% of reading PAN 570 HI93737–01 R–22
Sulfate 0–150 mg/L SO₄²- ±5 mg/L ±3% of reading Turbidimetric 466 HI93751–01 R–22
Surfactants Anionic 0.0–3.50 mg/L SDBS ±0.04 mg/L ±3% of reading Methylene blue 610 HI96769–01 R–22
Zinc 0.00–3.00 mg/L Zn ±0.03 mg/L ±3% of reading Zincon 620 HI93731–01 R–22
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
see page 10.120 for general accessories www.hannainst.com | 10.17
HI83300 Family
10.18 | www.hannainst.com
10
Photometers
Improved Optical System
HI83300 family is designed with an innovative optical system that
Reference Detector for a Stable Light Source
incorporates a beam splitter so that light can be used for absorbance
readings and for a reference detector. The reference detector A beam splitter is used as part of the internal reference system of the
monitors the intensity of light and modulates when there is drift due HI83300 photometer. The reference detector compensates for any
drift due to power fluctuations or ambient temperature changes. Now
to power fluctuation or the heating of the optical components. Each
you can rely on a stable source of light.
part has an important role in providing unparalleled performance from
a photometer.
Large Cuvette Size
High Efficiency LED Light Source The sample cell of the HI83300 fits a round, glass cuvette with a 25 mm
path length. Along with the advanced optical components, the larger
An LED light source offers superior performance as compared to
size of the cuvette greatly reduces errors in rotation from the indexing
a tungsten lamp. LEDs have a much higher luminous efficiency,
mark of the cuvettes. The relatively long path length of the sample
providing more light while using less power. They also produce very cuvette allows the light to pass through more of the sample solution,
little heat, which could otherwise affect the optical components an ensuring accurate measurements even in low absorbance samples.
electronic stability.
benchtop
Adding a focusing lens to the optical path allows for the collection
The narrow band interference filter not only ensures greater of all of the light that exits the cuvette and focusing the light on
wavelength accuracy (±1 nm) but is also extremely efficient, allowing a the silicon photo detector. This innovative approach to photometric
brighter, stronger signal to be transmitted. The end result is increased measurements cancels the errors from imperfections and scratches
measurement stability and less wavelength error. present in the glass cuvette eliminating the need to index the cuvette.
• Better linearity than research-grade spectrophotometers • Improved optical filters — higher wavelength
accuracy and light throughput
www.hannainst.com | 10.19
10
Photometers
benchtop
Connectivity
lasting battery lasts up to 500 photometer
1 pH Connectivity measurements or 50 hours of continuous pH
Any of our digital pH electrodes can be measurements. To further preserve battery
3 connected to the HI83300 family by a 3.5 life, the auto-off feature automatically shuts
mm input. Plugging in an electrode has never off the meter after 15 minutes of inactivity.
1
2 been easier; there are no alignment issues If being used on a benchtop, a power supply
or broken pins. Simply connect the electrode
can be plugged into the micro USB port at the
and start taking measurements.
back of the meter.
10.20 | www.hannainst.com
Photometer Capabilities
10
Data Management
The HI83300 family can store up to 1000
Concentration Measurement photometer and pH electrode readings,
Function which can be logged by pressing the LOG
key on the face of the meter. pH readings are
Users can access the menu of measurement
Photometers
logged along with comprehensive GLP (Good
methods with the simple press of a button. Laboratory Practice) information such as
Low, medium, and high range methods of date, time, calibration buffers, and electrode
several parameters are available for users to Large Cuvettes offset and slope.
obtain a high accuracy reading. Each method The sample cell of these meters fits a round,
is assigned a concentration unit of measure. glass cuvette with a 25 mm path length. The USB for Data Transfer
Parameters can be expressed in different relatively long path length of the sample Two USB ports are provided for transferring
chemical forms based on their preference. cuvette allows the light to pass through more data. One port allows the data to be
of the sample solution, ensuring accurate transferred to a flash drive while the other
CAL Check™ Functionality measurements even in low absorbance USB is used for direct connection to a
samples. This cuvette size also provides a computer. All data is transferred as a .csv
Hanna’s exclusive CAL Check feature larger opening, making it easier for users file that can be used with many spreadsheet
allows for performance verification of the to dispense ready-made liquid or powder programs for documentation.
independent measuring channels. Our reagents into the sample.
CAL Check standard vials are developed to
An affixed, light-blocking cover panel closes
simulate a specific absorbance value at each
wavelength to verify its accuracy.
over the sample cell, reducing stray light from Display Features
affecting any measurement readings.
benchtop
timer displays the time remaining until
a measurement will be taken, ensuring
consistent results between measurements Backlit Graphic LCD Display
and users.
A backlit, graphic LCD display provides an
Absorbance Measurement Mode
easy to read, user-friendly interface.
Users can select to calibrate and measure
samples in absorbance mode for each
wavelength used by the meter. This mode is
a convenient way for users to develop their
own calibration curves and measure samples
with customized chemistries.
pH Measurement
Data Management
The HI83300 family offers the ability to Capabilities Intuitive Display
connect a digital pH electrode. Users can
With virtual keys, a battery status indicator,
connect any sensor from our extensive line of User ID and Sample ID and practical error messages, users will find
digital pH electrodes. Whether a user requires An alphanumeric keypad can be used to enter the meter interface intuitive. On-screen
a glass or plastic body, a spheric or conical tip sample ID and user ID to be stored with the guides provide information relating to the
shape, or the ability for safe use with food measurement reading. The recall key allows current meter operation, and can be used
samples, our digital electrode offering is the user to review the data along with the at any stage in the setup or measurement
suitable for nearly everyone. date and time that the reading was taken. process to show contextual help.
www.hannainst.com | 10.21
10
Photometers
Logging 1000 readings (mixed photometer and electrode); log on demand with user name and sample ID optional input
Connectivity USB-A host for flash drive; micro-USB-B for power and computer connectivity
Power Supply 5 VDC USB 2.0 power adapter with USB-A to micro-USB-B cable (included)
10.22 | www.hannainst.com
General Accessories
10
Photometers
HI740224 plastic beaker 170 mL (6)
benchtop
HI72083300 carrying case for HI83300 family
HI740225 60 mL graduated syringe
HI75110/230 USB power supply HI740034P cap for 100 mL plastic beaker (10)
www.hannainst.com | 10.23
HI83300
10 Multiparameter
Photometer
with Digital pH Electrode Input
for Laboratories
10.24 | www.hannainst.com
LED (λ nm)
10
with Narrow Band
Parameter Range Resolution Accuracy Interference Filter Method
Alkalinity 0 to 500 mg/L (as CaCO₃) 1 mg/L ±5 mg/L ±5% of reading at 25 °C @ 610 nm Bromocresol green
Alkalinity, Marine 0 to 300 mg/L (as CaCO₃) 1 mg/L ±5 mg/L ±5% of reading at 25 °C @ 610 nm Bromocresol green
Aluminum 0.00 to 1.00 mg/L (as Al3+) 0.01 mg/L ±0.04 mg/L ±4% of reading at 25 °C @ 525 nm aluminon
Ammonia Low Range 0.00 to 3.00 mg/L (as NH₃-N) 0.01 mg/L ±0.04 mg/L ±4% of reading at 25 °C @ 420 nm Nessler
Ammonia Medium Range 0.00 to 10.00 mg/L (as NH₃-N) 0.01 mg/L ±0.05 mg/L ±5% of reading at 25 °C @ 420 nm Nessler
Ammonia High Range 0.0 to 100.0 mg/L (as NH₃-N) 0.1 mg/L ±0.5 mg/L ±5% of reading at 25 °C @ 420 nm Nessler
Bromine 0.00 to 8.00 mg/L (as Br₂) 0.01 mg/L ±0.08 mg/L ±3% of reading at 25 °C @ 525 nm DPD
Calcium 0 to 400 mg/L (as Ca²+) 1 mg/L ±10 mg/L ±5% of reading at 25 °C @ 466 nm oxalate
Calcium, Marine 200 to 600 mg/L (as Ca²+) 1 mg/L ±6% of reading at 25 °C @ 610 nm zincon
Chloride 0.0 to 20.0 mg/L (as Cl¯) 0.1 mg/L ±0.5 mg/L ±6% of reading at 25 °C @ 466 nm mercury (II) thiocyanate
Chlorine Dioxide 0.00 to 2.00 mg/L (as ClO₂) 0.01 mg/L ±0.10 mg/L ±5% of reading at 25 °C @ 575 nm chlorophenol red
Chlorine, Free 0.00 to 5.00 mg/L (as Cl₂) 0.01 mg/L ±0.03 mg/L ±3% of reading at 25 °C @ 525 nm DPD
Chlorine, Free Ultra Low Range 0.000 to 0.500 mg/L (as Cl₂) 0.001 mg/L ±0.020 mg/L ±3% of reading at 25 °C @ 525 nm DPD
Photometers
Chlorine, Total 0.00 to 5.00 mg/L (as Cl¯) 0.01 mg/L ±0.03 mg/L ±3% of reading at 25 °C @ 525 nm DPD
Chlorine, Total Ultra Low Range 0.000 to 0.500 mg/L (as Cl₂) 0.001 mg/L ±0.020 mg/L ±3% of reading at 25 °C @ 525 nm DPD
Chlorine, Total Ultra High Range 0 to 500 mg/L (as Cl₂) 1 mg/L ±3 mg/L ±3% of reading at 25 °C @ 525 nm iodometric
Chromium(VI) Low Range 0 to 300 μg/L (as Cr⁶+) 1 μg/L ±1 μg/L ±4% of reading at 25 °C @ 525 nm diphenylcarbohydrazide
Chromium(VI) High Range 0 to 1000 μg/L (as Cr⁶+) 1 μg/L ±5 μg/L ±4% of reading at 25 °C @ 525 nm diphenylcarbohydrazide
Color of Water 0 to 500 PCU (Platinum Cobalt Units) 1 PCU ±10 PCU ±5% of reading at 25 °C @ 420 nm colorimetric platinum cobalt
Copper Low Range 0.000 to 1.500 mg/L (as Cu²+) 0.001 mg/L ±0.01 mg/L ±5% of reading at 25 °C @ 575 nm bicinchoninate
Copper High Range 0.00 to 5.00 mg/L (as Cu²+) 0.01 mg/L ±0.02 mg/L ±4% of reading at 25 °C @ 575 nm bicinchoninate
Cyanuric Acid 0 to 80 mg/L (as CYA) 1 mg/L ±1 mg/L ±15% of reading at 25 °C @ 525 nm turbidimetric
Fluoride Low Range 0.00 to 2.00 mg/L (as F¯) 0.01 mg/L ±0.03 mg/L ±3% of reading at 25 °C @ 575 nm SPADNS
Fluoride High Range 0.0 to 20.0 mg/L (as F¯) 0.1 mg/L ±0.5 mg/L ±3% of reading at 25 °C @ 575 nm SPADNS
Hardness, Calcium 0.00 to 2.70 mg/L (as CaCO₃) 0.01 mg/L ±0.11 mg/L ±5% of reading at 25 °C @ 525 nm calmagite
Hardness, Magnesium 0.00 to 2.00 mg/L (ppm) (as CaCO₃) 0.01 mg/L ±0.11 mg/L ±5% of reading at 25 °C @ 525 nm calmagite
Hardness, Total Low Range 0 to 250 mg/L (as CaCO₃) 1 mg/L ±5 mg/L ±4% of reading at 25 °C @ 466 nm calmagite
Hardness, Total Medium Range 200 to 500 mg/L (as CaCO₃) 1 mg/L ±7 mg/L ±3% of reading at 25 °C @ 466 nm calmagite
Hardness, Total High Range 400 to 750 mg/L (as CaCO₃) 1 mg/L ±10 mg/L ±2% of reading at 25 °C @ 466 nm calmagite
Hydrazine 0 to 400 μg/L (as N₂H₄) 1 μg/L ±4% of full scale reading at 25 °C @ 466 nm p-Dimethylaminobenzaldehyde
Iodine 0.0 to 12.5 mg/L (as I₂) 0.1 mg/L ±0.1 mg/L ±5% of reading at 25 °C @ 525 nm DPD
Iron Low Range 0.000 to 1.600 mg/L (as Fe) 0.001 mg/L ±0.01 mg/L ±8% of reading at 25 °C @ 575 nm TPTZ
Iron High Range 0.00 to 5.00 mg/L (as Fe) 0.01 mg/L ±0.04 mg/L ±2% of reading at 25 °C @ 525 nm phenanthroline
Magnesium 0 to 150 mg/L (as Mg²+) 1 mg/L ±5 mg/L ±3% of reading at 25 °C @ 466 nm calmagite
Manganese Low Range 0 to 300 μg/L (as Mn) 1 μg/L ±10 μg/L ±3% of reading at 25 °C @ 575 nm PAN
Manganese High Range 0.0 to 20.0 mg/L (as Mn) 0.1 mg/L ±0.2 mg/L ±3% of reading at 25 °C @ 525 nm periodate
Molybdenum 0.0 to 40.0 mg/L (as Mo⁶+) 0.1 mg/L ±0.3 mg/L ±5% of reading at 25 °C @ 420 nm mercaptoacetic acid
Nickel Low Range 0.000 to 1.000 mg/L (as Ni) 0.001 mg/L ±0.010 mg/L ±7% of reading at 25 °C @ 575 nm PAN
benchtop
Nickel High Range 0.00 to 7.00 g/L (as Ni) 0.01 g/L ±0.07g/L ±4% of reading at 25 °C @ 575 nm EDTA
Nitrate 0.0 to 30.0 mg/L (as NO₃̄- N) 0.1 mg/L ±0.5 mg/L ±10% of reading at 25 °C @ 525 nm cadmium reduction
Nitrite Ultra Low Range, Marine 0 to 200 μg/L (as N0₂̄- N) 1 μg/L ±10 μg/L ±4% of reading at 25 °C @ 466 nm diazotization
Nitrite Low Range 0 to 600 μg/L (as N0₂̄- N) 1 μg/L ±20 μg/L ±4% of reading at 25 °C @ 466 nm diazotization
Nitrite High Range 0 to 150 mg/L (as N0₂̄- N) 1 mg/L ±4 mg/L ±4% of reading at 25 °C @ 575 nm ferrous sulfate
Oxygen, Dissolved 0.0 to 10.0 mg/L (as O₂) 0.1 mg/L ±0.4 mg/L ±3% of reading at 25 °C @ 420 nm Winkler
Oxygen Scavengers 0.00 to 1.50 mg/L (as Carbohydrazide) 0.01 mg/L ±5 μg/L ±5% of reading at 25 °C @ 575 nm iron reduction
Oxygen Scavengers 0 to 1000 μg/L (as DEHA) 1 μg/L ±5 μg/L ±5% of reading at 25 °C @ 575 nm iron reduction
Oxygen Scavengers 0.00 to 2.50 mg/L (as Hydroquinone) 0.01 mg/L ±5 μg/L ±5% of reading at 25 °C @ 575 nm iron reduction
0.00 to 4.50 mg/L (as Iso-ascorbic
Oxygen Scavengers 0.01 mg/L ±5 μg/L ±5% of reading at 25 °C @ 575 nm iron reduction
acid)
Ozone 0.00 to 2.00 mg/L (as O₃) 0.01 mg/L ±0.02 mg/L ±3% of reading at 25 °C @ 525 nm DPD
pH 6.5 to 8.5 pH 0.1 pH ±0.1 pH at 25 °C @ 525 nm phenol red
Phosphate Ultra Low Range, Marine 0 to 200 μg/L (as P) 1 μg/L ±5 μg/L ±5% of reading at 25 °C @ 610 nm ascorbic acid
Phosphate Low Range 0.00 to 2.50 mg/L (ppm) 0.01 mg/L ±0.04 mg/L ±4% of reading at 25 °C @ 610 nm ascorbic acid
Phosphate High Range 0.0 to 30.0 mg/L (as PO₄³-) 0.1 mg/L ±1 mg/L ±4% of reading at 25 °C @ 525 nm amino acid
Potassium 0.0 to 20.0 mg/L (as K) 0.1 mg/L ±3.0 mg/L ±7% of reading at 25 °C @ 466 nm turbidimetric tetraphenylborate
Silica Low Range 0.00 to 2.00 mg/L (as SiO₂) 0.01 mg/L ±0.03 mg/L ±3% of reading at 25 °C @ 610 nm heteropoly blue
Silica High range 0 to 200 mg/L (as SiO₂) 1 mg/L ±1 mg/L ±5% of reading at 25 °C @ 466 nm molybdosilicate
Silver 0.000 to 1.000 mg/L (as Ag) 0.001 mg/L ±0.020 mg/L ±5% of reading at 25 °C @ 575 nm PAN
Sulfate 0 to 150 mg/L (as SO₄²-) 1 mg/L ±5 mg/L ±3% of reading at 25 °C @ 466 nm turbidimetric
Surfactants, Anionic 0.00 to 3.50 mg/L (as SDBS) 0.01 mg/L ±0.04 mg/L ±3% of reading at 25 °C @ 610 nm methylene blue
Zinc 0.00 to 3.00 mg/L (as Zn) 0.01 mg/L ±0.03 mg/L ±3% of reading at 25 °C @ 575 nm zincon
HI83300-01 (115V) and HI83300-02 (230V) is supplied with sample cuvettes and caps (4 ea.), cloth for wiping cuvettes,
Ordering Information USB to micro USB cable connector, power adapter, instrument quality certificate, and instruction manual.
Standards HI83300-11 CAL Check Cuvette Kit for HI83300
See page 10.90 for standard reagents; see page 10.23 for general accessories www.hannainst.com | 10.25
HI83303
10 Multiparameter
Photometer
with Digital pH Electrode Input
for Aquaculture
a successful ecosystem. for a specific wavelength for use with common spreadsheet programs
with user supplied chemistry or for
• Rechargeable Battery
teaching principles of photometry
·· Li-polymer rechargeable battery
• Advanced optical system
• Units of Measure lasts for 500 measurements or
·· Innovative optical design that
·· Appropriate unit of measure 50 hours of pH measurement
utilizes a reference detector and
along with chemical form is • Battery Status Indicator
focusing lens to eliminate errors from
displayed along with reading ·· Indicates the amount of battery life left
changes in the light source and from
imperfections in the glass cuvette. • Result Conversion • Error Messages
·· Automatically convert readings ·· Photometric error messages
• Backlit 128 x 64 Pixel Graphic LCD Display
to other chemical forms with ·· pH calibration messages include clean
·· Backlit graphic display allows for
the touch of a button electrode, check buffer and check probe
easy viewing in low light conditions
·· The 128 x 64 Pixel LCD allows for a • Cuvette Cover
simplified user interface with virtual ·· Aids in preventing stray light
keys and on-screen help to guide from affecting measurements
the user through use of the meter
• Data Logging
• Built-in Reaction Timer for ·· Up to 1000 photometric and pH
Photometric Measurements readings can be stored by simply
·· The measurement is taken after pressing the dedicated LOG button.
the countdown timer expires. Logged readings are just as easily
·· Countdown timer ensures that all recalled by pressing the RCL button
readings are taken at the appropriate ·· Sample ID and User ID information
reaction intervals regardless of user for can be added to a logged reading HI83303-11
10.26 | www.hannainst.com
10
Photometers
·· Good Laboratory Practice (GLP)
to track calibration information
including date, time, buffers used,
offset and slope for traceability
·· pH CAL Check™ alerts user to potential
problems during the calibration process
·· Space saving having a pH meter and
photometer built into one meter
LED (λ nm)
with Narrow Band
Parameter Range Resolution Accuracy Interference Filter Method
Alkalinity 0 to 500 mg/L (as CaCO₃) 1 mg/L ±5 mg/L ±5% of reading at 25 °C @ 610 nm Bromocresol green
Alkalinity, Marine 0 to 300 mg/L (as CaCO₃) 1 mg/L ±5 mg/L ±5% of reading at 25 °C @ 610 nm Bromocresol green
benchtop
Ammonia Low Range 0.00 to 3.00 mg/L (as NH₃-N) 0.01 mg/L ±0.04 mg/L ±4% of reading at 25 °C @ 420 nm Nessler
Ammonia Medium Range 0.00 to 10.00 mg/L (as NH₃-N) 0.01 mg/L ±0.05 mg/L ±5% of reading at 25 °C @ 420 nm Nessler
Ammonia High Range 0.0 to 100.0 mg/L (as NH₃-N) 0.1 mg/L ±0.5 mg/L ±5% of reading at 25 °C @ 420 nm Nessler
Calcium 0 to 400 mg/L (as Ca²+) 1 mg/L ±10 mg/L ±5% of reading at 25 °C @ 466 nm oxalate
Calcium, Marine 200 to 600 mg/L (as Ca²+) 1 mg/L ±6% of reading at 25 °C @ 610 nm zincon
Chlorine, Free 0.00 to 5.00 mg/L (as Cl₂) 0.01 mg/L ±0.03 mg/L ±3% of reading at 25 °C @ 525 nm DPD
Chlorine, Total 0.00 to 5.00 mg/L (as Cl¯) 0.01 mg/L ±0.03 mg/L ±3% of reading at 25 °C @ 525 nm DPD
Copper Low Range 0.000 to 1.500 mg/L (as Cu²+) 0.001 mg/L ±0.01 mg/L ±5% of reading at 25 °C @ 575 nm bicinchoninate
Copper High Range 0.00 to 5.00 mg/L (as Cu²+) 0.01 mg/L ±0.02 mg/L ±4% of reading at 25 °C @ 575 nm bicinchoninate
Nitrate 0.0 to 30.0 mg/L (as NO₃̄- N) 0.1 mg/L ±0.5 mg/L ±10% of reading at 25 °C @ 525 nm cadmium reduction
Nitrite Ultra Low Range, Marine 0 to 200 μg/L (as N0₂̄- N) 1 μg/L ±10 μg/L ±4% of reading at 25 °C @ 466 nm diazotization
Nitrite Low Range 0 to 600 μg/L (as N0₂̄- N) 1 μg/L ±20 μg/L ±4% of reading at 25 °C @ 466 nm diazotization
Nitrite High Range 0 to 150 mg/L (as N0₂̄- N) 1 mg/L ±4 mg/L ±4% of reading at 25 °C @ 575 nm ferrous sulfate
Oxygen, Dissolved 0.0 to 10.0 mg/L (as O₂) 0.1 mg/L ±0.4 mg/L ±3% of reading at 25 °C @ 420 nm Winkler
Phosphate Ultra Low Range, Marine 0 to 200 μg/L (as P) 1 μg/L ±5 μg/L ±5% of reading at 25 °C @ 610 nm ascorbic acid
Phosphate Low Range 0.00 to 2.50 mg/L (ppm) 0.01 mg/L ±0.04 mg/L ±4% of reading at 25 °C @ 610 nm ascorbic acid
Phosphate High Range 0.0 to 30.0 mg/L (as PO₄³-) 0.1 mg/L ±1 mg/L ±4% of reading at 25 °C @ 525 nm amino acid
HI83303-01 (115V) and HI83303-02 (230V) is supplied with sample cuvettes and caps (4 ea.), cloth for wiping cuvettes,
Ordering Information USB to micro USB cable connector, power adapter, instrument quality certificate, and instruction manual.
See page 10.90 for standard reagents; see page 10.23 for general accessories www.hannainst.com | 10.27
HI83305
10 Multiparameter
Photometer
with Digital pH Electrode Input
for Boilers and Cooling Towers
10.28 | www.hannainst.com
10
Photometers
·· pH CAL Check™ alerts user to potential
problems during the calibration process
·· Space saving having a pH meter and
photometer built into one meter
LED (λ nm)
with Narrow Band
Parameter Range Resolution Accuracy Interference Filter Method
Aluminum 0.00 to 1.00 mg/L (as Al3+) 0.01 mg/L ±0.04 mg/L ±4% of reading at 25 °C @ 525 nm aluminon
Ammonia Low Range 0.00 to 3.00 mg/L (as NH₃-N) 0.01 mg/L ±0.04 mg/L ±4% of reading at 25 °C @ 420 nm Nessler
Ammonia Medium Range 0.00 to 10.00 mg/L (as NH₃-N) 0.01 mg/L ±0.05 mg/L ±5% of reading at 25 °C @ 420 nm Nessler
Ammonia High Range 0.0 to 100.0 mg/L (as NH₃-N) 0.1 mg/L ±0.5 mg/L ±5% of reading at 25 °C @ 420 nm Nessler
Bromine 0.00 to 8.00 mg/L (as Br₂) 0.01 mg/L ±0.08 mg/L ±3% of reading at 25 °C @ 525 nm DPD
Chlorine Dioxide 0.00 to 2.00 mg/L (as ClO₂) 0.01 mg/L ±0.10 mg/L ±5% of reading at 25 °C @ 575 nm chlorophenol red
Chlorine, Free 0.00 to 5.00 mg/L (as Cl₂) 0.01 mg/L ±0.03 mg/L ±3% of reading at 25 °C @ 525 nm DPD
Chlorine, Total 0.00 to 5.00 mg/L (as Cl¯) 0.01 mg/L ±0.03 mg/L ±3% of reading at 25 °C @ 525 nm DPD
Chromium(VI) Low Range 0 to 300 μg/L (as Cr⁶+) 1 μg/L ±1 μg/L ±4% of reading at 25 °C @ 525 nm diphenylcarbohydrazide
Chromium(VI) High Range 0 to 1000 μg/L (as Cr⁶+) 1 μg/L ±5 μg/L ±4% of reading at 25 °C @ 525 nm diphenylcarbohydrazide
Copper Low Range 0.000 to 1.500 mg/L (as Cu²+) 0.001 mg/L ±0.01 mg/L ±5% of reading at 25 °C @ 575 nm bicinchoninate
Copper High Range 0.00 to 5.00 mg/L (as Cu²+) 0.01 mg/L ±0.02 mg/L ±4% of reading at 25 °C @ 575 nm bicinchoninate
benchtop
Hydrazine 0 to 400 μg/L (as N₂H₄) 1 μg/L ±4% of full scale reading at 25 °C @ 466 nm p-Dimethylaminobenzaldehyde
Iron Low Range 0.000 to 1.600 mg/L (as Fe) 0.001 mg/L ±0.01 mg/L ±8% of reading at 25 °C @ 575 nm TPTZ
Iron High Range 0.00 to 5.00 mg/L (as Fe) 0.01 mg/L ±0.04 mg/L ±2% of reading at 25 °C @ 525 nm phenanthroline
Molybdenum 0.0 to 40.0 mg/L (as Mo⁶+) 0.1 mg/L ±0.3 mg/L ±5% of reading at 25 °C @ 420 nm mercaptoacetic acid
Nitrate 0.0 to 30.0 mg/L (as NO₃̄- N) 0.1 mg/L ±0.5 mg/L ±10% of reading at 25 °C @ 525 nm cadmium reduction
Nitrite Low Range 0 to 600 μg/L (as N0₂̄- N) 1 μg/L ±20 μg/L ±4% of reading at 25 °C @ 466 nm diazotization
Nitrite High Range 0 to 150 mg/L (as N0₂̄- N) 1 mg/L ±4 mg/L ±4% of reading at 25 °C @ 575 nm ferrous sulfate
Oxygen, Dissolved 0.0 to 10.0 mg/L (as O₂) 0.1 mg/L ±0.4 mg/L ±3% of reading at 25 °C @ 420 nm Winkler
Oxygen Scavengers 0.00 to 1.50 mg/L (as Carbohydrazide) 0.01 mg/L ±5 μg/L ±5% of reading at 25 °C @ 575 nm iron reduction
Oxygen Scavengers 0 to 1000 μg/L (as DEHA) 1 μg/L ±5 μg/L ±5% of reading at 25 °C @ 575 nm iron reduction
Oxygen Scavengers 0.00 to 2.50 mg/L (as Hydroquinone) 0.01 mg/L ±5 μg/L ±5% of reading at 25 °C @ 575 nm iron reduction
0.00 to 4.50 mg/L (as Iso-ascorbic
Oxygen Scavengers 0.01 mg/L ±5 μg/L ±5% of reading at 25 °C @ 575 nm iron reduction
acid)
pH 6.5 to 8.5 pH 0.1 pH ±0.1 pH at 25 °C @ 525 nm phenol red
Phosphate Low Range 0.00 to 2.50 mg/L (ppm) 0.01 mg/L ±0.04 mg/L ±4% of reading at 25 °C @ 610 nm ascorbic acid
Phosphate High Range 0.0 to 30.0 mg/L (as PO₄³-) 0.1 mg/L ±1 mg/L ±4% of reading at 25 °C @ 525 nm amino acid
Silica Low Range 0.00 to 2.00 mg/L (as SiO₂) 0.01 mg/L ±0.03 mg/L ±3% of reading at 25 °C @ 610 nm heteropoly blue
Silica High range 0 to 200 mg/L (as SiO₂) 1 mg/L ±1 mg/L ±5% of reading at 25 °C @ 466 nm molybdosilicate
Zinc 0.00 to 3.00 mg/L (as Zn) 0.01 mg/L ±0.03 mg/L ±3% of reading at 25 °C @ 575 nm zincon
HI83305-01 (115V) and HI83305-02 (230V) is supplied with sample cuvettes and caps (4 ea.), cloth for wiping cuvettes, USB to micro
Ordering Information USB cable connector, power adapter, instrument quality certificate, and instruction manual.
See page 10.90 for standard reagents; see page 10.23 for general accessories www.hannainst.com | 10.29
HI83306
10 Multiparameter
Photometer
with Digital pH Electrode Input
for Environmental Analysis
• Data Logging
• Built-in Reaction Timer for
·· Up to 1000 photometric and pH
Photometric Measurements
readings can be stored by simply
·· The measurement is taken after
pressing the dedicated LOG button.
the countdown timer expires. Logged readings are just as easily
·· Countdown timer ensures that all recalled by pressing the RCL button
readings are taken at the appropriate ·· Sample ID and User ID information
reaction intervals regardless of user for can be added to a logged reading HI83306-11
10.30 | www.hannainst.com
10
Photometers
·· Good Laboratory Practice (GLP)
to track calibration information
including date, time, buffers used,
offset and slope for traceability
·· pH CAL Check™ alerts user to potential
problems during the calibration process
·· Space saving having a pH meter and
photometer built into one meter
LED (λ nm)
with Narrow Band
Parameter Range Resolution Accuracy Interference Filter Method
Ammonia Low Range 0.00 to 3.00 mg/L (as NH₃-N) 0.01 mg/L ±0.04 mg/L ±4% of reading at 25 °C @ 420 nm Nessler
Ammonia Medium Range 0.00 to 10.00 mg/L (as NH₃-N) 0.01 mg/L ±0.05 mg/L ±5% of reading at 25 °C @ 420 nm Nessler
Ammonia High Range 0.0 to 100.0 mg/L (as NH₃-N) 0.1 mg/L ±0.5 mg/L ±5% of reading at 25 °C @ 420 nm Nessler
Chlorine, Free 0.00 to 5.00 mg/L (as Cl₂) 0.01 mg/L ±0.03 mg/L ±3% of reading at 25 °C @ 525 nm DPD
Chlorine, Total 0.00 to 5.00 mg/L (as Cl¯) 0.01 mg/L ±0.03 mg/L ±3% of reading at 25 °C @ 525 nm DPD
benchtop
Chromium(VI) Low Range 1 μg/L ±1 μg/L ±4% of reading at 25 °C @ 525 nm diphenylcarbohydrazide
Chromium(VI) High Range 0 to 1000 μg/L (as Cr⁶+) 1 μg/L ±5 μg/L ±4% of reading at 25 °C @ 525 nm diphenylcarbohydrazide
Color of Water 0 to 500 PCU (Platinum Cobalt Units) 1 PCU ±10 PCU ±5% of reading at 25 °C @ 420 nm colorimetric platinum cobalt
Copper Low Range 0.000 to 1.500 mg/L (as Cu²+) 0.001 mg/L ±0.01 mg/L ±5% of reading at 25 °C @ 575 nm bicinchoninate
Copper High Range 0.00 to 5.00 mg/L (as Cu²+) 0.01 mg/L ±0.02 mg/L ±4% of reading at 25 °C @ 575 nm bicinchoninate
Cyanuric Acid 0 to 80 mg/L (as CYA) 1 mg/L ±1 mg/L ±15% of reading at 25 °C @ 525 nm turbidimetric
Molybdenum 0.0 to 40.0 mg/L (as Mo⁶+) 0.1 mg/L ±0.3 mg/L ±5% of reading at 25 °C @ 420 nm mercaptoacetic acid
Nickel Low Range 0.000 to 1.000 mg/L (as Ni) 0.001 mg/L ±0.010 mg/L ±7% of reading at 25 °C @ 575 nm PAN
Nickel High Range 0.00 to 7.00 g/L (as Ni) 0.01 g/L ±0.07g/L ±4% of reading at 25 °C @ 575 nm EDTA
Nitrate 0.0 to 30.0 mg/L (as NO₃̄- N) 0.1 mg/L ±0.5 mg/L ±10% of reading at 25 °C @ 525 nm cadmium reduction
Nitrite High Range 0 to 150 mg/L (as N0₂̄- N) 1 mg/L ±4 mg/L ±4% of reading at 25 °C @ 575 nm ferrous sulfate
Oxygen, Dissolved 0.0 to 10.0 mg/L (as O₂) 0.1 mg/L ±0.4 mg/L ±3% of reading at 25 °C @ 420 nm Winkler
Phosphate Low Range 0.00 to 2.50 mg/L (ppm) 0.01 mg/L ±0.04 mg/L ±4% of reading at 25 °C @ 610 nm ascorbic acid
Phosphate High Range 0.0 to 30.0 mg/L (as PO₄³-) 0.1 mg/L ±1 mg/L ±4% of reading at 25 °C @ 525 nm amino acid
Silica Low Range 0.00 to 2.00 mg/L (as SiO₂) 0.01 mg/L ±0.03 mg/L ±3% of reading at 25 °C @ 610 nm heteropoly blue
Silver 0.000 to 1.000 mg/L (as Ag) 0.001 mg/L ±0.020 mg/L ±5% of reading at 25 °C @ 575 nm PAN
Zinc 0.00 to 3.00 mg/L (as Zn) 0.01 mg/L ±0.03 mg/L ±3% of reading at 25 °C @ 575 nm zincon
HI83306-01 (115V) and HI83306-02 (230V) is supplied with sample cuvettes and caps (4 ea.), cloth for wiping cuvettes,
Ordering Information USB to micro USB cable connector, power adapter, instrument quality certificate, and instruction manual.
See page 10.90 for standard reagents; see page 10.23 for general accessories www.hannainst.com | 10.31
HI83325
10 Multiparameter
Photometer
with Digital pH Electrode Input
for Nutrient Analysis
• Connectivity
• Advanced optical system ·· Allows for the user to plot ·· Logged readings can be quickly and
·· Innovative optical design that concentration versus absorbance easily transferred to a flash drive
utilizes a reference detector and for a specific wavelength for use using the USB-A host port or to a
focusing lens to eliminate errors from with user supplied chemistry or for computer using the micro USB-B port
benchtop
changes in the light source and from teaching principles of photometry ·· Data is exported as a .CSV file for use
imperfections in the glass cuvette. with common spreadsheet programs
• Units of Measure
• Backlit 128 x 64 Pixel Graphic LCD Display ·· Appropriate unit of measure • Rechargeable Battery
along with chemical form is ·· Li-polymer rechargeable battery
·· Backlit graphic display allows for
lasts for 500 measurements or
easy viewing in low light conditions displayed along with reading
50 hours of pH measurement
·· The 128 x 64 Pixel LCD allows for a • Result Conversion
simplified user interface with virtual • Battery Status Indicator
·· Automatically convert readings
·· Indicates the amount of battery life left
keys and on-screen help to guide to other chemical forms with
the user through use of the meter • Error Messages
the touch of a button
·· Photometric error messages
• Built-in Reaction Timer for • Cuvette Cover ·· pH calibration messages include clean
Photometric Measurements ·· Aids in preventing stray light electrode, check buffer and check probe
·· The measurement is taken after from affecting measurements
the countdown timer expires.
• Data Logging
·· Countdown timer ensures that all
·· Up to 1000 photometric and pH
readings are taken at the appropriate
readings can be stored by simply
reaction intervals regardless of user for
pressing the dedicated LOG button.
better consistency in measurements
Logged readings are just as easily
• Absorbance mode recalled by pressing the RCL button
·· Hanna's exclusive CAL Check™ ·· Sample ID and User ID information
cuvettes for validation of can be added to a logged reading HI83325-11
10.32 | www.hannainst.com
10
Photometers
·· Good Laboratory Practice (GLP)
to track calibration information
including date, time, buffers used,
offset and slope for traceability
·· pH CAL Check™ alerts user to potential
problems during the calibration process
·· Space saving having a pH meter and
photometer built into one meter
Supplied Complete
HI83225 is supplied with the HI83300-100
in a rugged carrying case.
benchtop
LED (λ nm)
with Narrow Band
Parameter Range Resolution Accuracy Interference Filter Method
Ammonia Low Range 0.00 to 3.00 mg/L (as NH₃-N) 0.01 mg/L ±0.04 mg/L ±4% of reading at 25 °C @ 420 nm Nessler
Ammonia Medium Range 0.00 to 10.00 mg/L (as NH₃-N) 0.01 mg/L ±0.05 mg/L ±5% of reading at 25 °C @ 420 nm Nessler
Ammonia High Range 0.0 to 100.0 mg/L (as NH₃-N) 0.1 mg/L ±0.5 mg/L ±5% of reading at 25 °C @ 420 nm Nessler
Calcium 0 to 400 mg/L (as Ca²+) 1 mg/L ±10 mg/L ±5% of reading at 25 °C @ 466 nm oxalate
Magnesium 0 to 150 mg/L (as Mg²+) 1 mg/L ±5 mg/L ±3% of reading at 25 °C @ 466 nm calmagite
Nitrate 0.0 to 30.0 mg/L (as NO₃̄- N) 0.1 mg/L ±0.5 mg/L ±10% of reading at 25 °C @ 525 nm cadmium reduction
Phosphate High Range 0.0 to 30.0 mg/L (as PO₄³-) 0.1 mg/L ±1 mg/L ±4% of reading at 25 °C @ 525 nm amino acid
Potassium 0.0 to 20.0 mg/L (as K) 0.1 mg/L ±3.0 mg/L ±7% of reading at 25 °C @ 466 nm turbidimetric tetraphenylborate
Sulfate 0 to 150 mg/L (as SO₄²-) 1 mg/L ±5 mg/L ±3% of reading at 25 °C @ 466 nm turbidimetric
HI83325-01 (115V) and HI83325-02 (230V) is supplied with sample cuvettes and caps (4 ea.), activated carbon for 50 tests,
demineralizer for preparation of 10 L deionized water (100g), 100 mL graduated beaker with caps (10), 3 mL pipette, 60 mL syringe, 5 mL
Ordering Information syringe, graduated cylinder, spoon, funnel, paper filters (100), cloth for wiping cuvettes, USB to micro USB cable connector, power adapter,
instruction manual, instrument quality certificate, and carrying case.
See page 10.90 for standard reagents; see page 10.23 for general accessories www.hannainst.com | 10.33
HI83900
10 Suction Lysimeter
for Root Level Soil Monitoring
Nitrogen is indispensable for the plant’s life and is a key factor in fertilization. Nitrogen
For better monitoring of soil solution allows the development of the vegetative growth of the plant; in particular, it contributes
composition throughout an entire growth to lengthening of trunks and sprouts and increases the production of foliage and fruits.
period of crops, at least two lysimeters An excess of nitrogen weakens the plants structure creating an unbalanced relationship
should be installed in the root zone of a between the leaves and the stalks. In addition, the plant becomes less resistant to diseases.
representative plant, one at the upper part
and one in the lower part of the root zone. Phosphorous is an important element in the composition of DNA and RNA, the regulators
of the energetic exchange (ATP and ADP), as well as the reserve substances in seeds and
For better measurement accuracy and bulbs. It contributes to the formation of buds, roots, blooming, and lignification. A lack of
repeatability, it is recommended to replicate phosphorous results in: stifling of plants, slow growth, a reduction of production, smaller
installations in at least two more locations. fruits and a lower expansion of the roots.
All include capillary rubber tube with rubber cap and finger clamp, cleaning solution
starter kit (120 mL), 30 mL syringe and instructions
Ordering HI83900-30 is comprised of 30 cm (0.98’) sampler tube ending with porous ceramic tip.
Information
HI83900-60 is comprised of 60 cm (1.97’) sampler tube ending with porous ceramic tip.
HI83900-90 is comprised of 90 cm (2.95’) sampler tube ending with porous ceramic tip.
Accessories HI83900-25 cleaning solution kit, 500 mL
10.34 | www.hannainst.com
The Significance of Pool and Spa Water Testing 10
Photometers
Residual Disinfection and pH Control Commercial chlorine for disinfection may be available as a gas
(Cl2), a liquid like sodium hypochlorite or bleach (NaOCl) or in a solid
In swimming pool treatment, disinfection or sanitizing is essential to rid
state like calcium hypochlorite, chlorohydantoins or chlorocyanuric
the pool of bacteria and control nuisance organisms like algae which may
acid compounds. These compounds, once dissolved in water,
occur in the pool, filtration equipment, and piping.
establish equilibrium between the hypochlorous acid (HOCl) and
There are a number of available disinfectant compounds, including the hypochlorite ions (OCl¯). Although both forms are considered
benchtop
chlorine, bromine and ozone dosing systems, of which chlorine is the free chlorine, it is the hypochlorous acid that provides the strongest
most common. disinfecting and oxidizing characteristic of chlorine solutions. The
amount of hypochlorous acid in chlorinated water depends upon the
Chlorine pH value of the solution. Changes in pH value will effect the HOCl
Chlorine is a strong oxidizing agent that destroys organic pollutants equilibrium in relation to the hydrogen and hypochlorite ions.
and bacteria. Chlorine combines with compounds containing nitrogen
As depicted by the graph, HOCl decreases and OCl¯ increases as pH
to form chloramines, during which only part of the chlorine will be used
while the rest remains active, continuing it’s disinfecting action. increases. At a low pH, almost all the free chlorine is in the molecular
form HOCl, and at a pH of around 7.5, the ratio between HOCl and OCl¯
Combined chlorine is the quantity of chlorine that has already combined is 50:50. Since the ionic form OCl¯ is a slow acting sanitizer while the
with nitrogen containing compounds. It is much less effective as a molecular HOCl is a fast acting, it is important to measure pH regularly.
disinfectant than free chlorine. The As a general rule a pH of about 7.2 is recommended to maintain fast
addition of combined chlorine, and acting disinfection conditions.
free chlorine gives total chlorine. A
pool manager needs to aim for the Bromine
perfect balance where free and total
In many countries bromine sanitizing has been introduced as an
chlorine are proportionally equal, and
alternative for chlorine, although it is not as strong. The advantage of
thus to keep the combined chlorine
bromine lies in its stability at higher temperatures (advantageous for
levels near zero. The presence of
chloramines is undesirable because heated pools and hot tubs), and its maintained disinfection power at a
of the distinctive ‘swimming pool higher pH. Furthermore, there is very little reaction between bromine
smell’ as well as irritation to the eyes and nitrogen compounds, reducing the unpleasant odor, and eye
and mucous membranes caused by irritation problems. The main disadvantage of bromine is the slower
combined chlorines like dichloramines. acting disinfecting power, making it less suitable for larger pools.
www.hannainst.com | 10.35
10
Photometers
Ozone Calcium
Ozone is a very strong oxidizing agent that destroys organic compounds The presence of calcium in the system is desired to ensure filming on
that are especially difficult to oxidize. It allows the pool manager to very those places where the temperature is relatively high, like in boilers
efficiently remove combined chlorine without frequently refreshing
and pipes transporting warm water. Scaling must be avoided because
large amounts of pool water. By the time the water passes through
it reduces heat transfer and pump capacity, and causes cloudiness in
the filter units, ozone has already completed sanitizing, and it is not
the water.
benchtop
Mainly because of its strong oxidizing power, the return water may It is recommended to maintain the calcium hardness value within the
contain trace concentrations of ozone. It imperative to know that range from 200 to 400 ppm as calcium carbonate (CaCO₃).
ozone is very unstable, so to ensure thorough sanitization of the
water, low-level chlorination remains necessary. Alkalinity
Alkalinity is the measure of the total concentration of alkaline
The Water Balance and Langelier Index
substances, mostly bicarbonates, dissolved in the water. The higher
Pool water characteristics need to be maintained in a balanced state
the alkalinity, the more resistant the water is to pH change. At the same
to avoid numerous issues. Measuring certain variables is extremely
important to predict if the water is corrosive or will cause scaling. time, high alkaline water is a major contributor to scaling problems like
incrustation in filtration equipment, pumps, and piping.
A saturation index developed by Dr. Wilfred Langelier is widely used
to predict the balance of swimming pool waters. It represents the It is recommended to maintain the alkalinity value within the range
estimation of a solutions ability to dissolve or precipitate calcium from 80 to 125 ppm as calcium carbonate (CaCO₃).
carbonate deposits. A certain level of this precipitation (filming) is
desired to insulate pipes and boilers from contact with water. When no
protective filming is formed, water is considered to be corrosive. On the
pH
other hand, too much filming can develop into scaling and incrustation The pH of the water is an important factor since at lower pH levels the
of the pipes. corrosion rate increases. If the alkalinity values are sufficiently high,
In the treatment and monitoring of pool water, the pool manager it will not be difficult to control the pH. Most pool managers prefer to
must ensure that related parameters such as alkalinity, hardness keep the pH between 7.2 and 7.4 to best maintain low corrosion rates
and pH are carefully monitored in addition to sanitizing chemicals. and a sufficient activity of chlorine.
10.36 | www.hannainst.com
Langelier Index To calculate your water balance, three parameters must be measured;
10
calcium hardness, alkalinity and pH. Find the hardness and alkalinity
The Langelier Index is a powerful tool to calculate the water balance,
factor in the reference tables below.
and to predict corrosion or scaling problems. Theoretically, a LI of zero
indicates perfect water condition for swimming pools. If LI>0, scaling The water temperature is, in general, maintained between 24°C (76°F)
and staining of the water is present, and if LI<0 the water is corrosive and 34°C (94°F). Assuming the temperature is kept within those
and highly irritating. A tolerance of ±0.4 is normally acceptable. ranges, an average value or 0.7 may be used.
Photometers
13.0-14.0 Scale Forming Reduce pH and/or alkalinity
HF = hardness factor, log (Ca hardness, ppm as CaCO3)
AF = alkalinity factor, log (alkalinity, ppm as CaCO3) Water Index Reference Table
Temperature Calcium Hardness Alkalinity
To calculate the exact Langelier Index of your water please use the
mg/L mg/L
WATER INDEX reference tables. °C °F TF
(as CaCO₃)
HF
(as CaCO₃)
AF
0 32 0 5 0.7 5 0.7
For most pools, water is balanced if: 4 39 0.1 25 1.4 25 1.4
8 46 0.2 50 1.7 50 1.7
• The pH value is maintained within the recommended ranges of pH 12 54 0.3 75 1.9 75 1.9
7.2 - 7.6 16 60 0.4 100 2.0 100 2.0
20 68 0.5 150 2.2 150 2.2
24 75 0.6 200 2.3 200 2.3
• Ideally, the Alkalinity should be maintained within a range of
28 82 0.7 250 2.4 250 2.4
80 - 125 ppm 32 90 0.7 300 2.5 300 2.5
36 97 0.8 400 2.6 400 2.6
• The Calcium Hardness should be maintained within a range of 40 104 0.9 500 2.7 500 2.7
200 - 400 ppm. 50 122 1.0 1000 3.0 1000 3.0
benchtop
www.hannainst.com | 10.37
HI83326
10 Multiparameter
Photometer
with Digital pH Electrode Input
for Pool and Spa Applications
10.38 | www.hannainst.com
10
Photometers
·· Good Laboratory Practice (GLP)
to track calibration information
including date, time, buffers used,
offset and slope for traceability
·· pH CAL Check™ alerts user to potential
problems during the calibration process
·· Space saving having a pH meter and
photometer built into one meter
benchtop
LED (λ nm)
with Narrow Band
Parameter Range Resolution Accuracy Interference Filter Method
Alkalinity 0 to 500 mg/L (as CaCO₃) 1 mg/L ±5 mg/L ±5% of reading at 25 °C @ 610 nm Bromocresol green
Bromine 0.00 to 8.00 mg/L (as Br₂) 0.01 mg/L ±0.08 mg/L ±3% of reading at 25 °C @ 525 nm DPD
Chlorine, Free 0.00 to 5.00 mg/L (as Cl₂) 0.01 mg/L ±0.03 mg/L ±3% of reading at 25 °C @ 525 nm DPD
Chlorine, Total 0.00 to 5.00 mg/L (as Cl¯) 0.01 mg/L ±0.03 mg/L ±3% of reading at 25 °C @ 525 nm DPD
Copper High Range 0.00 to 5.00 mg/L (as Cu²+) 0.01 mg/L ±0.02 mg/L ±4% of reading at 25 °C @ 575 nm bicinchoninate
Cyanuric Acid 0 to 80 mg/L (as CYA) 1 mg/L ±1 mg/L ±15% of reading at 25 °C @ 525 nm turbidimetric
Hardness, Calcium 0.00 to 2.70 mg/L (as CaCO₃) 0.01 mg/L ±0.11 mg/L ±5% of reading at 25 °C @ 525 nm calmagite
Iron High Range 0.00 to 5.00 mg/L (as Fe) 0.01 mg/L ±0.04 mg/L ±2% of reading at 25 °C @ 525 nm phenanthroline
Nitrate 0.0 to 30.0 mg/L (as NO₃̄- N) 0.1 mg/L ±0.5 mg/L ±10% of reading at 25 °C @ 525 nm cadmium reduction
Ozone 0.00 to 2.00 mg/L (as O₃) 0.01 mg/L ±0.02 mg/L ±3% of reading at 25 °C @ 525 nm DPD
Phosphate Low Range 0.00 to 2.50 mg/L (ppm) 0.01 mg/L ±0.04 mg/L ±4% of reading at 25 °C @ 610 nm ascorbic acid
HI83326-01 (115V) and HI83326-02 (230V) is supplied with sample cuvettes and caps (4 ea.), cloth for wiping cuvettes,
Ordering Information USB to micro USB cable connector, power adapter, instrument quality certificate, and instruction manual.
See page 10.90 for standard reagents; see page 10.23 for general accessories www.hannainst.com | 10.39
HI83308
10 Multiparameter
Photometer
with Digital pH Electrode Input
for Water Conditioning
10.40 | www.hannainst.com
10
Photometers
·· Good Laboratory Practice (GLP)
to track calibration information
including date, time, buffers used,
offset and slope for traceability
·· pH CAL Check™ alerts user to potential
problems during the calibration process
·· Space saving having a pH meter and
photometer built into one meter
LED (λ nm)
with Narrow Band
Parameter Range Resolution Accuracy Interference Filter Method
Ammonia Low Range 0.00 to 3.00 mg/L (as NH₃-N) 0.01 mg/L ±0.04 mg/L ±4% of reading at 25 °C @ 420 nm Nessler
Ammonia Medium Range 0.00 to 10.00 mg/L (as NH₃-N) 0.01 mg/L ±0.05 mg/L ±5% of reading at 25 °C @ 420 nm Nessler
Ammonia High Range 0.0 to 100.0 mg/L (as NH₃-N) 0.1 mg/L ±0.5 mg/L ±5% of reading at 25 °C @ 420 nm Nessler
Chlorine, Free 0.00 to 5.00 mg/L (as Cl₂) 0.01 mg/L ±0.03 mg/L ±3% of reading at 25 °C @ 525 nm DPD
Chlorine, Total 0.00 to 5.00 mg/L (as Cl¯) 0.01 mg/L ±0.03 mg/L ±3% of reading at 25 °C @ 525 nm DPD
benchtop
Copper Low Range 0.001 mg/L ±0.01 mg/L ±5% of reading at 25 °C @ 575 nm bicinchoninate
Copper High Range 0.00 to 5.00 mg/L (as Cu²+) 0.01 mg/L ±0.02 mg/L ±4% of reading at 25 °C @ 575 nm bicinchoninate
Fluoride Low Range 0.00 to 2.00 mg/L (as F¯) 0.01 mg/L ±0.03 mg/L ±3% of reading at 25 °C @ 575 nm SPADNS
Iron Low Range 0.000 to 1.600 mg/L (as Fe) 0.001 mg/L ±0.01 mg/L ±8% of reading at 25 °C @ 575 nm TPTZ
Iron High Range 0.00 to 5.00 mg/L (as Fe) 0.01 mg/L ±0.04 mg/L ±2% of reading at 25 °C @ 525 nm phenanthroline
Manganese Low Range 0 to 300 μg/L (as Mn) 1 μg/L ±10 μg/L ±3% of reading at 25 °C @ 575 nm PAN
Manganese High Range 0.0 to 20.0 mg/L (as Mn) 0.1 mg/L ±0.2 mg/L ±3% of reading at 25 °C @ 525 nm periodate
Molybdenum 0.0 to 40.0 mg/L (as Mo⁶+) 0.1 mg/L ±0.3 mg/L ±5% of reading at 25 °C @ 420 nm mercaptoacetic acid
Nickel Low Range 0.000 to 1.000 mg/L (as Ni) 0.001 mg/L ±0.010 mg/L ±7% of reading at 25 °C @ 575 nm PAN
Nickel High Range 0.00 to 7.00 g/L (as Ni) 0.01 g/L ±0.07g/L ±4% of reading at 25 °C @ 575 nm EDTA
Nitrate 0.0 to 30.0 mg/L (as NO₃̄- N) 0.1 mg/L ±0.5 mg/L ±10% of reading at 25 °C @ 525 nm cadmium reduction
Oxygen, Dissolved 0.0 to 10.0 mg/L (as O₂) 0.1 mg/L ±0.4 mg/L ±3% of reading at 25 °C @ 420 nm Winkler
Phosphate Low Range 0.00 to 2.50 mg/L (ppm) 0.01 mg/L ±0.04 mg/L ±4% of reading at 25 °C @ 610 nm ascorbic acid
Phosphate High Range 0.0 to 30.0 mg/L (as PO₄³-) 0.1 mg/L ±1 mg/L ±4% of reading at 25 °C @ 525 nm amino acid
Silica Low Range 0.00 to 2.00 mg/L (as SiO₂) 0.01 mg/L ±0.03 mg/L ±3% of reading at 25 °C @ 610 nm heteropoly blue
Silver 0.000 to 1.000 mg/L (as Ag) 0.001 mg/L ±0.020 mg/L ±5% of reading at 25 °C @ 575 nm PAN
Zinc 0.00 to 3.00 mg/L (as Zn) 0.01 mg/L ±0.03 mg/L ±3% of reading at 25 °C @ 575 nm zincon
HI83308-01 (115V) and HI83308-02 (230V) is supplied with sample cuvettes and caps (4 ea.), cloth for wiping cuvettes,
Ordering Information USB to micro USB cable connector, power adapter, instrument quality certificate, and instruction manual.
See page 10.90 for standard reagents; see page 10.23 for general accessories www.hannainst.com | 10.41
HI96000 Series
10 Portable
Photometers
• CAL Check™
·· Allows for performance verification
and calibration of the meter using "C" versions include
NIST traceable standards.
CAL Check standards and
• GLP
a rigid carrying case
·· Review of the last calibration date.
• Auto-shut off
·· Automatic shut off after 10 minutes
of non-use when the meter is in
Photometers
cooling lamp indicator is displayed “CAL Check” will appear on the display. At the end of the measurement the display will show the
prior to a reading being taken. validation standard value.
• Units of measure
·· Appropriate unit of measure is
CAL Check Calibration*
displayed along with reading. Calibrate your instrument quickly and easily.
Zero the meter prior to calibration... Press and hold CAL Check for three seconds to enter
calibration mode. Place the CAL Check Standard A into the cuvette holder and press ZERO/CFM.
Hanna's portable photometers feature an The lamp, cuvette and detector icons will appear on the display followed by “-0.0-”. The meter is
advanced optical system; the combination now zeroed and ready for calibration.
of a special tungsten lamp, a narrow band
interference filter, and silicon photodetector ... and calibrate to a known standard. Place the CAL Check Standard B into the cuvette holder.
ensure accurate photometric readings Press READ/TIMER and the lamp, cuvette and detector icons will appear on the display. After
every time. The Hanna exclusive CAL Check measurement the instrument will show the CAL Check Standard value.
feature utilizes ready-made, NIST traceable
standards to verify both meter validation
and calibration. The exclusive cuvette locking
system ensures that the cuvette is inserted
into the measurement cell in the same
position every time to maintain a consistent Solutions and Accessories
path length.
HI93703-50 Cuvette cleaning solution, 230 mL HI731335 Cuvette caps (4)
HI731318 Cuvette cleaning cloth (4) HI740318 Carrying case for HI96 series
*Each CAL Check cuvette is clearly labeled with its respective measurement. Please read the full instruction manual before validation/calibration.
10.42 | www.hannainst.com
HI96712
Aluminum Portable 10
Photometer
• CAL Check™
·· Allows for performance verification
and calibration of the meter using
NIST traceable standards.
• GLP
·· Review of the last calibration date.
• Auto-shut off
·· Automatic shut off after 10 minutes
of non-use when the meter is in
Photometers
measurement mode. Prevents
wastage of batteries in the event
the meter is accidentally left on.
• Battery status indicator
·· Indicates the amount of
battery life left.
• Built-in timer
·· Display of time remaining before
a measurement is taken. Ensures
that all readings are taken at the
appropriate reaction intervals
for the test being performed.
• Error messages
·· Messages on display alerting to
problems including no cap, high
Significance of Use zero, and standard too low.
Due to its vast occurrence in minerals, rocks and clays, aluminum is present in nearly all natural • Cooling lamp indicator
water as a soluble salt, colloid, or an insoluble compound. These forms of aluminum may also ·· To maintain the desirable wavelength
appear in treated water and wastewater due to its use during coagulation processes. When to be used for absorbance, it is
concentrations are greater than 0.2 mg/L, water will be colored, but cause no significant human necessary to ensure components are not
health effects. overheated from the heat generated by
the tungsten lamp. Each photometer
Specifications HI96712 Aluminum is designed to allow a minimal amount
of time for components to cool. The
portable
Range 0.00 to 1.00 mg/L (ppm)
cooling lamp indicator is displayed
Resolution 0.01 mg/L (ppm) prior to a reading being taken.
Accuracy @ 25°C (77°F) ±0.02 mg/L ±4% of reading
• Units of measure
Light Source tungsten lamp ·· Appropriate unit of measure is
Light Detector silicon photocell with narrow band interference filter @ 525 nm displayed along with reading.
Power Supply 9V battery
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
see page 10.42 for general accessories www.hannainst.com | 10.43
HI96700 · HI96715 · HI96733
10 Ammonia Portable
Photometers
• CAL Check™
·· Allows for performance verification
and calibration of the meter using
NIST traceable standards.
• GLP
·· Review of the last calibration date.
• Auto-shut off
·· Automatic shut off after 10 minutes
of non-use when the meter is in
Photometers
Auto-off
of non-use in calibration mode; with last reading reminder
cooling lamp indicator is displayed
prior to a reading being taken. Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing
displayed along with reading. adaptation of the ASTM Manual of Water and Environmental Technology, D1426-93,
Method
Nessler method
HI96700, HI96715 and HI96733 are supplied with sample cuvettes (2) with caps,
9V battery, instrument quality certificate and instruction manual.
These photometers are for the measurement
CAL Check standards and testing reagents sold separately
of ammonia nitrogen in freshwater samples. Ordering
HI96700C, HI96715C and HI96733C include photometer, CAL Check standards, sample
Information
cuvettes (2) with caps, 9V battery, cuvette wiping cloth, instrument quality certificate,
Significance of Use instruction manual and rigid carrying case.
Reagents sold separately
Present naturally in surface and wastewaters,
HI96700-11 CAL Check standard cuvettes
ammonia mainly results from the deamination
of organic nitrogen-containing compounds HI96700 HI93700-01 reagents for 100 tests (N-NH3 LR)
and hydrolysis of urea. Ammonia may also HI93700-03 reagents for 300 tests (N-NH3 LR)
be present from water treatment processes HI96715-11 CAL Check standard cuvettes
that utilize chloramines for disinfection, Reagents and
HI96715 HI93715-01 reagents for 100 tests (N-NH3 MR)
where ammonia is added to the water to Standards
HI93715-03 reagents for 300 tests (N-NH3 MR)
react with chlorine. Ammonia is less likely to
appear in groundwater due to adsorption to HI96733-11 CAL Check standard cuvettes
soil particles. HI96733 HI93733-01 reagents for 100 tests (NH4+ HR)
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
10.44 | www.hannainst.com see page 10.42 for general accessories
HI96769
Anionic Surfactants 10
Portable Photometer
• CAL Check™
·· Allows for performance verification
and calibration of the meter using
NIST traceable standards.
• GLP
·· Review of the last calibration date.
• Auto-shut off
·· Automatic shut off after 10 minutes
of non-use when the meter is in
Photometers
measurement mode. Prevents
wastage of batteries in the event
the meter is accidentally left on.
• Battery status indicator
·· Indicates the amount of
battery life left.
• Built-in timer
·· Display of time remaining before
a measurement is taken. Ensures
that all readings are taken at the
appropriate reaction intervals
for the test being performed.
• Error messages
Significance of Use ·· Messages on display alerting to
problems including no cap, high
Present in waters and wastewaters, surfactants are discharged via aqueous waste from
zero, and standard too low.
households, industrial laundering, and other cleansing operations. Generally present in
detergents and other cleaning agents, a surfactant molecule consists of a strongly hydrophobic • Cooling lamp indicator
group and a strongly hydrophilic group, permitting solubility in both aqueous and nonaqueous ·· To maintain the desirable wavelength
media. When the hydrophilic group is negatively charged, it is deemed an anionic surfactant; to be used for absorbance, it is
when the hydrophilic group is positively charged, it is deemed a cationic surfactant. necessary to ensure components are not
overheated from the heat generated by
the tungsten lamp. Each photometer
is designed to allow a minimal amount
Specifications HI96769 Anionic Surfactants
of time for components to cool. The
portable
Range 0.00 to 3.50 mg/L (ppm) as SDBS
cooling lamp indicator is displayed
Resolution 0.01 mg/L prior to a reading being taken.
Accuracy @ 25°C (77°F) ±0.04 mg/L ±3% of reading
• Units of measure
Light Source tungsten lamp ·· Appropriate unit of measure is
Light Detector silicon photocell with narrow band interference filter @ 610 nm displayed along with reading.
Power Supply 9V battery
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
see page 10.42 for general accessories www.hannainst.com | 10.45
HI96716
10 Bromine Portable
Photometer
• CAL Check™
·· Allows for performance verification
and calibration of the meter using
NIST traceable standards.
• GLP
·· Review of the last calibration date.
• Auto-shut off
·· Automatic shut off after 10 minutes
of non-use when the meter is in
Photometers
lamp, a narrow band interference filter, adaptation of the Standard Methods for the Examination of Water and Wastewater,
Method
and silicon photodetector ensure accurate 20th edition, DPD method
photometric readings every time. The HI96716 is supplied with sample cuvettes (2) with caps, 9V battery, instrument
Hanna exclusive CAL Check feature utilizes quality certificate and instruction manual.
ready-made, NIST traceable standards to Ordering
CAL Check standards and testing reagents sold separately
verify both meter validation and calibration. HI96716C includes photometer, CAL Check standards, sample cuvettes (2) and
Information
caps, 9V battery, scissors, cuvette wiping cloth, instrument quality certificate,
The exclusive cuvette locking system
instruction manual and rigid carrying case.
ensures that the cuvette is inserted into the Reagents sold separately
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
10.46 | www.hannainst.com see page 10.42 for general accessories
HI96753
Chloride Portable 10
Photometer
• CAL Check™
·· Allows for performance verification
and calibration of the meter using
NIST traceable standards.
• GLP
·· Review of the last calibration date.
• Auto-shut off
·· Automatic shut off after 10 minutes
of non-use when the meter is in
Photometers
measurement mode. Prevents
wastage of batteries in the event
the meter is accidentally left on.
• Battery status indicator
·· Indicates the amount of
battery life left.
• Built-in timer
·· Display of time remaining before
a measurement is taken. Ensures
that all readings are taken at the
appropriate reaction intervals
for the test being performed.
• Error messages
Significance of Use ·· Messages on display alerting to
problems including no cap, high
As one of the major inorganic anions in water and wastewater, chloride is often measured in a
zero, and standard too low.
variety of industries. Due to its corrosive nature, chloride levels are monitored in boiler systems
and cooling towers to prevent metal parts from being damaged. Not known to be toxic to • Cooling lamp indicator
humans, chloride is monitored in drinking water for aesthetic purposes due to its negative affect ·· To maintain the desirable wavelength
on taste. However, chloride can be toxic to plant life. Chloride may be monitored in agricultural to be used for absorbance, it is
applications in certain areas of the world where salinity levels are known to be naturally high. necessary to ensure components are not
overheated from the heat generated by
the tungsten lamp. Each photometer
is designed to allow a minimal amount
Specifications HI96753 Chloride
of time for components to cool. The
portable
Range 0.0 to 20.0 mg/L (ppm)
cooling lamp indicator is displayed
Resolution 0.1 mg/L prior to a reading being taken.
Accuracy @ 25°C (77°F) ±0.5 mg/L ±6% of reading
• Units of measure
Light Source light emitting diode ·· Appropriate unit of measure is
Light Detector silicon photocell with narrow band interference filter @ 466 nm displayed along with reading.
Power Supply 9V battery
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
see page 10.42 for general accessories www.hannainst.com | 10.47
HI96738
10 Chlorine Dioxide
Portable
Photometer
• CAL Check™
·· Allows for performance verification
and calibration of the meter using
NIST traceable standards.
• GLP
·· Review of the last calibration date.
• Auto-shut off
Photometers
Light Detector silicon photocell with narrow band interference filter @ 575 nm
• Units of measure
·· Appropriate unit of measure is Power Supply 9V battery
displayed along with reading. after ten minutes of non-use in measurement mode; after one hour
Auto-off
of non-use in calibration mode; with last reading reminder
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
10.48 | www.hannainst.com see page 10.42 for general accessories
HI96701 • HI96762
Free Chlorine 10
Portable
Photometers
• CAL Check™
·· Allows for performance verification
and calibration of the meter using
NIST traceable standards.
• GLP
·· Review of the last calibration date.
• Auto-shut off
Photometers
·· Automatic shut off after 10 minutes
of non-use in measurement mode.
Prevents wastage of batteries in the
event the meter is accidentally left on.
• Battery status indicator
·· Indicates the amount of
battery life left.
• Built-in timer
·· Display of time remaining before
a measurement is taken. Ensures
that all readings are taken at the
appropriate reaction intervals
Significance of Use for the test being performed.
As one of the oldest and most common forms of disinfection, chlorine improves water quality by • Error messages
destroying disease-producing microorganisms, and by reacting with other organic and inorganic ·· Messages on display alerting to
substances. Chlorine levels must be actively monitored to ensure sufficient chlorine is present problems including no cap, high
for disinfection, as well as to control adverse effects such as taste, odor, and potential reactions zero, and standard too low.
with organic matter to form harmful disinfection byproducts.
• Cooling lamp indicator
HI96701 HI96762 ·· To maintain the desirable wavelength
Specifications Free Chlorine Free Chlorine ULR
to be used for absorbance, it is
Range 0.00 to 5.00 mg/L (ppm) 0.000 to 0.500 mg/L (ppm) necessary to ensure components are not
0.01 mg/L from 0.00 to 3.50 mg/L; overheated from the heat generated by
Resolution 0.001 mg/L
0.10 mg/L above 3.50 mg/L the tungsten lamp. Each photometer
is designed to allow a minimal amount
portable
Accuracy @ 25°C (77°F) ±0.03 mg/L ±3% of reading ±0.020 mg/L ±3% of reading
Light Source tungsten lamp of time for components to cool. The
Light Detector silicon photocell with narrow band interference filter @ 525 nm cooling lamp indicator is displayed
Power Supply 9V battery
prior to a reading being taken.
after ten minutes of non-use in measurement mode; after one hour of non-use in • Units of measure
Auto-off
calibration mode; with last reading reminder ·· Appropriate unit of measure is
Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing displayed along with reading.
Dimensions 192 x 104 x 69 mm (7.6 x 4.1 x 2.7”)
Weight 320g (11.3 oz.)
The HI96701 portable photometer is for
adaptation of the USEPA method 330.5 adaptation of the Standard Method the measurement of free chlorine while the
Method
and Standard Method 4500-Cl G 4500-Cl G
HI96762 measures free chlorine ultra low
HI96701 and HI96762 are supplied with sample cuvettes (2) with caps, 9V battery,
range in a wide variety of water samples.
instrument quality certificate and instruction manual.
CAL Check standards and testing reagents sold separately
Hanna's portable photometers feature an
Ordering advanced optical system; the combination
HI96701C and HI96762C include photometer, CAL Check standards, sample
Information of a special tungsten lamp, a narrow band
cuvettes (2) with caps, 9V battery, cuvette wiping cloth, instrument quality certificate,
instruction manual and rigid carrying case. interference filter, and silicon photodetector
Reagents sold separately
ensure accurate photometric readings every
HI96701-11 CAL Check Standard Cuvettes time. The Hanna exclusive CAL Check feature
HI96701 HI93701-01 reagents for 100 tests utilizes ready-made, NIST traceable standards
Reagents and HI93701-03 reagents for 300 tests to verify both meter validation and calibration.
Standards HI96762-11 CAL Check Standard Cuvettes The exclusive cuvette locking system
HI96762 HI95762-01 reagents for 100 tests ensures that the cuvette is inserted into the
measurement cell in the same position every
HI95762-03 reagents for 300 tests
time to maintain a consistent path length.
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
see page 10.42 for general accessories www.hannainst.com | 10.49
HI96761
10 Chlorine, Total
Portable
Photometers
• CAL Check™
·· Allows for performance verification
and calibration of the meter using
NIST traceable standards.
• GLP
·· Review of the last calibration date.
• Auto-shut off
Photometers
The Hanna exclusive CAL Check feature HI96761C includes photometer, CAL Check standards, sample cuvettes (2) with caps, 9V
Information
battery, scissors, cuvette wiping cloth, instrument quality certificate, instruction manual
utilizes ready-made, NIST traceable standards
and rigid carrying case.
to verify both meter validation and calibration. Reagents sold separately
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
10.50 | www.hannainst.com see page 10.42 for general accessories
HI96723 · HI96749
Chromium VI HR 10
and LR Portable
Photometers
• CAL Check™
·· Allows for performance verification
and calibration of the meter using
NIST traceable standards.
• GLP
·· Review of the last calibration date.
• Auto-shut off
Photometers
·· Automatic shut off after 10 minutes
of non-use when the meter is in
measurement mode. Prevents
wastage of batteries in the event
the meter is accidentally left on.
• Battery status indicator
·· Indicates the amount of
battery life left.
• Built-in timer
·· Display of time remaining before
a measurement is taken. Ensures
that all readings are taken at the
appropriate reaction intervals
Significance of Use for the test being performed.
Hexavalent chromium salts are used in various industrial applications, such as in the • Error messages
manufacture of paints, dyes, explosives, and ceramics, and extensively in the metal finishing ·· Messages on display alerting to
and plating industries. Due to its toxicity to humans, animals, and aquatic life, hexavalent problems including no cap, high
chromium is actively monitored and neutralized in wastewater from the above industries. zero, and standard too low.
• Cooling lamp indicator
·· To maintain the desirable wavelength
to be used for absorbance, it is
HI96723 HI96749
Specifications necessary to ensure components are not
Chromium VI HR Chromium VI LR
overheated from the heat generated by
Range 0 to 1000 µg/L (ppb) 0 to 300 µg/L (ppb)
the tungsten lamp. Each photometer
portable
Resolution 1 µg/L 1 µg/L
is designed to allow a minimal amount
Accuracy @ 25°C (77°F) ±5 µg/L ±4% of reading ±1 µg/L ±4% of reading of time for components to cool. The
Light Source tungsten lamp cooling lamp indicator is displayed
Light Detector silicon photocell with narrow band interference filter @ 525 nm prior to a reading being taken.
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
see page 10.42 for general accessories www.hannainst.com | 10.51
HI96727
10 Color of Water
Portable
Photometer
• CAL Check™
·· Allows for performance verification
and calibration of the meter using
NIST traceable standards.
• GLP
·· Review of the last calibration date.
• Auto-shut off
Photometers
Resolution 10 PCU
is designed to allow a minimal amount Accuracy @ 25°C (77°F) ±10 PCU ±5% of reading
of time for components to cool. The
Light Source tungsten lamp
cooling lamp indicator is displayed
Light Detector silicon photocell with narrow band interference filter @ 420 nm
prior to a reading being taken.
Power Supply 9V battery
• Units of measure
after ten minutes of non-use in measurement mode; after one hour
·· Appropriate unit of measure is Auto-off
of non-use in calibration mode; with last reading reminder
displayed along with reading.
Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing
the measurement of color of water. Hanna's Adaptation of the Standard Method for the Examination of Water and Wastewater
Method
portable photometers feature an advanced 18th Edition, colorimetric platinum cobalt method
optical system; the combination of a special HI96727 is supplied with sample cuvettes (2) with caps, 9V battery, instrument quality
tungsten lamp, a narrow band interference certificate and instruction manual.
filter, and silicon photodetector ensure Ordering
CAL Check standards and testing reagents sold separately
accurate photometric readings every time. HI96727C includes photometer, CAL Check standards, sample cuvettes (2) with caps, 9V
Information
battery, scissors, cuvette wiping cloth, instrument quality certificate, instruction manual
The Hanna exclusive CAL Check feature
and rigid carrying case.
utilizes ready-made, NIST traceable standards Reagents sold separately
to verify both meter validation and calibration.
Reagents and
The exclusive cuvette locking system HI96727-11 CAL Check standard cuvettes
Standards
ensures that the cuvette is inserted into the
HI740227 filter assembly
measurement cell in the same position every Accessories
time to maintain a consistent path length. HI740228 filter disc
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
10.52 | www.hannainst.com see page 10.42 for general accessories
HI96747 · HI96702
Photometers
·· Automatic shut off after 10 minutes
of non-use when the meter is in
measurement mode. Prevents
wastage of batteries in the event
the meter is accidentally left on.
• Battery status indicator
·· Indicates the amount of
battery life left.
• Built-in timer
·· Display of time remaining before
a measurement is taken. Ensures
that all readings are taken at the
Significance of Use appropriate reaction intervals
Due to its malleability, thermal and electrical conductivity, and corrosion resistance, copper for the test being performed.
is used in a variety of industrial and technological applications. Copper may also be present in
• Error messages
natural water and effluents due to widespread use to control biological growths in reservoirs
·· Messages on display alerting to
and distribution pipes.
problems including no cap, high
zero, and standard too low.
Specifications HI96747 Copper, LR HI96702 Copper, HR
• Cooling lamp indicator
Range 0.000 to 1.500 mg/L (ppm) 0.00 to 5.00 mg/L (ppm)
·· To maintain the desirable wavelength
Resolution 0.001 mg/L 0.01 mg/L (ppm)
to be used for absorbance, it is
Accuracy @ 25°C (77°F) ±0.010 mg/L ±5% of reading ±0.02 mg/L ±4% of reading necessary to ensure components are not
Light Source tungsten lamp overheated from the heat generated by
the tungsten lamp. Each photometer
portable
silicon photocell with narrow band silicon photocell with narrow band
Light Detector
interference filter @ 560 nm interference filter @ 575 nm is designed to allow a minimal amount
Power Supply 9V battery
of time for components to cool. The
cooling lamp indicator is displayed
after ten minutes of non-use in measurement mode; after one hour of non-use in
Auto-off prior to a reading being taken.
calibration mode; with last reading reminder
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
see page 10.42 for general accessories www.hannainst.com | 10.53
HI96714
10 Cyanide Portable
Photometer
• CAL Check™
·· Allows for performance verification
and calibration of the meter using
NIST traceable standards.
• GLP
·· Review of the last calibration date.
• Auto-shut off
·· Automatic shut off after 10 minutes
of non-use when the meter is in
Photometers
displayed along with reading. Accuracy @ 25°C (77°F) ±0.005 mg/L ±3% of reading
Light Detector silicon photocell with narrow band interference filter @ 610 nm
The HI96714 portable photometer is for the
Power Supply 9V battery
measurement of cyanide. Hanna's portable
after ten minutes of non-use in measurement mode; after one hour
photometers feature an advanced optical Auto-off
of non-use in calibration mode; with last reading reminder
system; the combination of a special tungsten
Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing
lamp, a narrow band interference filter,
and silicon photodetector ensure accurate Dimensions 192 x 104 x 69 mm (7.6 x 4.1 x 2.7”)
photometric readings every time. The Hanna Weight 320g (11.3 oz.)
exclusive CAL Check feature utilizes ready- adaptation of the Standard Methods for the Examination of Water and Wastewater,
made, NIST traceable standards to verify both Method
18th edition, Pyridine-Pyrazolone method
meter validation and calibration. The exclusive
HI96714 is supplied with sample cuvettes (2) with caps, 9V battery, instrument quality
cuvette locking system ensures that the Ordering
certificate and instruction manual.
cuvette is inserted into the measurement cell Information CAL Check standards and testing reagents sold separately
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
10.54 | www.hannainst.com see page 10.42 for general accessories
HI96722
Cyanuric Acid 10
Photometer
• CAL Check™
·· Allows for performance verification
and calibration of the meter using
NIST traceable standards.
• GLP
·· Review of the last calibration date.
• Auto-shut off
·· Automatic shut off after 10 minutes
of non-use when the meter is in
Photometers
measurement mode. Prevents
wastage of batteries in the event
the meter is accidentally left on.
• Battery status indicator
·· Indicates the amount of
battery life left.
• Built-in timer
·· Display of time remaining before
a measurement is taken. Ensures
that all readings are taken at the
appropriate reaction intervals
for the test being performed.
• Error messages
·· Messages on display alerting to
problems including no cap, high
zero, and standard too low.
Significance of Use
• Cooling lamp indicator
Cyanuric acid (CYA) is best known as a stabilizing reagent for chlorine. It is widely applied in ·· To maintain the desirable wavelength
swimming pool and spa treatment programs to slow down the decomposition of hypochlorous to be used for absorbance, it is
acid. In outside pool areas, this process is accelerated by the effects of UV rays. When applied necessary to ensure components are not
properly it can save up to 80% of normal chlorine consumption in pools during peak months. overheated from the heat generated by
the tungsten lamp. Each photometer
Cyanuric acid is also used in chlorinated beaches, selective herbicides and whitening agents.
is designed to allow a minimal amount
of time for components to cool. The
portable
cooling lamp indicator is displayed
prior to a reading being taken.
Specifications HI96722 Cyanuric Acid
• Units of measure
Range 0 to 80 mg/L (ppm)
·· Appropriate unit of measure is
Resolution 1 mg/L (ppm) displayed along with reading.
Accuracy @ 25°C (77°F) ±1 mg/L ±15% of reading
Light Detector silicon photocell with narrow band interference filter @ 525 nm The HI96722 portable photometer is for the
Power Supply 9V battery
measurement of cyanuric. Hanna's portable
photometers feature an advanced optical
after ten minutes of non-use in measurement mode; after one hour
Auto-off system; the combination of a special tungsten
of non-use in calibration mode; with last reading reminder
lamp, a narrow band interference filter,
Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing
and silicon photodetector ensure accurate
Dimensions 192 x 104 x 69 mm (7.6 x 4.1 x 2.7”) photometric readings every time. The
Weight 320g (11.3 oz.) Hanna exclusive CAL Check feature utilizes
Method adaptation of the turbidimetric method ready-made, NIST traceable standards to
verify both meter validation and calibration.
HI96722 is supplied with sample cuvettes (2) with caps, 9V battery, instrument quality
Ordering The exclusive cuvette locking system
certificate and instruction manual.
Information CAL Check standards and testing reagents sold separately ensures that the cuvette is inserted into the
measurement cell in the same position every
HI96722-11 CAL Check standard cuvettes
Reagents and time to maintain a consistent path length.
HI93722-01 reagents for 100 tests
Standards
HI93722-03 reagents for 300 tests
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
see page 10.42 for general accessories www.hannainst.com | 10.55
HI96729 · HI96739
10 Fluoride Portable
Photometers
• CAL Check™
·· Allows for performance verification
and calibration of the meter using
NIST traceable standards.
• GLP
·· Review of the last calibration date.
• Auto-shut off
·· Automatic shut off after 10 minutes
of non-use when the meter is in
Photometers
cooling lamp indicator is displayed Light Detector silicon photocell with narrow band interference filter @ 575 nm
prior to a reading being taken. Power Supply 9V battery
• Units of measure after ten minutes of non-use in measurement mode; after one hour
Auto-off
of non-use in calibration mode; with last reading reminder
·· Appropriate unit of measure is
displayed along with reading. Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing
Dimensions 192 x 104 x 69 mm (7.6 x 4.1 x 2.7”)
Weight 320g (11.3 oz.)
every time. The Hanna exclusive CAL Check HI93703-53 reagent for reducing chlorine concentration
feature utilizes ready-made, NIST traceable HI96729-11 CAL Check standard cuvettes
standards to verify both meter validation HI96729
HI93729-01 reagents for 100 tests
and calibration. The exclusive cuvette locking Reagents and
HI93729-03 reagents for 300 tests
system ensures that the cuvette is inserted Standards
HI96739-11 CAL Check standard cuvettes
into the measurement cell in the same
position every time to maintain a consistent HI96739 HI93739-01 reagents for 100 tests
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
10.56 | www.hannainst.com see page 10.42 for general accessories
HI96720 · HI96719
Hardness Standard 10
Method Portable
Photometers
• CAL Check™
·· Allows for performance verification
and calibration of the meter using
NIST traceable standards.
• GLP
·· Review of the last calibration date.
• Auto-shut off
Photometers
·· Automatic shut off after 10 minutes
of non-use when the meter is in
measurement mode. Prevents
wastage of batteries in the event
the meter is accidentally left on.
• Battery status indicator
·· Indicates the amount of
battery life left.
• Built-in timer
·· Display of time remaining before
a measurement is taken. Ensures
Significance of Use that all readings are taken at the
appropriate reaction intervals
Water, with exception to distilled water, contains dissolved salts (magnesium and calcium
for the test being performed.
carbonates). The concentration of these salts determines the water hardness, which can be
expressed in calcium carbonate or magnesium carbonate. The sum of these two represents • Error messages
the total hardness level. In addition, water hardness is also related to the phenomenon of pipe ·· Messages on display alerting to
rusting in water heating and cooling systems, reverse osmosis, and demineralization plants. problems including no cap, high
zero, and standard too low.
HI96720 HI96719 • Cooling lamp indicator
Specifications Ca Hardness Mg Hardness ·· To maintain the desirable wavelength
Range 0.00 to 2.70 mg/L (ppm) 0.00 to 2.00 mg/L (ppm) to be used for absorbance, it is
Resolution 0.01 mg/L necessary to ensure components are not
Accuracy @ 25°C (77°F) ±0.11 mg/L ±5% of reading overheated from the heat generated by
the tungsten lamp. Each photometer
portable
Light Source tungsten lamp
Light Detector silicon photocell with narrow band interference filter @ 525nm is designed to allow a minimal amount
of time for components to cool. The
Power Supply 9V battery
cooling lamp indicator is displayed
after ten minutes of non-use in measurement mode; after one hour
Auto-off
of non-use in calibration mode; with last reading reminder
prior to a reading being taken.
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
see page 10.42 for general accessories www.hannainst.com | 10.57
HI96735
10 Hardness, EPA
Portable
Photometer
• CAL Check™
·· Allows for performance verification
and calibration of the meter using
NIST traceable standards.
• GLP
·· Review of the last calibration date.
• Auto-shut off
Photometers
overheated from the heat generated by Resolution 1 mg/L from 0 to 100 mg/L ; 5 mg/L from 100 to 750 mg/L
the tungsten lamp. Each photometer
portable
Accuracy @ 25°C (77°F) ±5 mg/L ±4% of reading ±7 mg/L ±3% of reading ±10 mg/L ±2% of reading
is designed to allow a minimal amount
Light Source light emitting diode
of time for components to cool. The
Light Detector silicon photocell with narrow band interference filter @ 466
cooling lamp indicator is displayed
prior to a reading being taken. Power Supply 9V battery
after ten minutes of non-use in measurement mode; after one hour of non-use in
• Choice of units of measure Auto-off
calibration mode; with last reading reminder
·· Appropriate unit of measure (mg/L, °F,
Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing
°D, °E) is displayed along with reading.
Dimensions 192 x 104 x 69 mm (7.6 x 4.1 x 2.7”)
*The reagents are in liquid and powder form and are supplied in bottles and
in packets. The amount of reagent is precisely dosed to ensure maximum
repeatability.
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
10.58 | www.hannainst.com see page 10.42 for general accessories
HI96785
Honey Color 10
Portable Analyzer
• Auto-shut off
·· Automatic shut off after 10 minutes
of non-use when the meter is in
measurement mode. Prevents
wastage of batteries in the event
the meter is accidentally left on.
• Battery status indicator
Photometers
determination of honey color. Hanna's
portable photometers feature an advanced
optical system; the combination of a special
tungsten lamp, a narrow band interference
filter, and silicon photodetector ensure
accurate photometric readings every time. The
exclusive cuvette locking system ensures that
the cuvette is inserted into the measurement
cell in the same position every time to maintain
a consistent path 10 mm path length.
Significance of Use
The primary characteristic for commercial
honey classification is color. Color classes
USDA Color Standards Designations Color Range Pfund Scales (mm) are expressed in millimeters (mm) Pfund as
Water White 8 or less compared to an analytical grade glycerol
Extra White Over 8 to and including 17
standard reference.
portable
Specifications HI96785 The color of honey tends to darken with
age or change according to the method of
Range 0 to 150 mm Pfund
conservation or production used by beekeepers.
Resolution 1 mm Pfund
These practices can include the use of old
Accuracy @ 25°C (77°F) ±2 mm Pfund @ 80mm Pfund beehives, contact with metals, the temperature
Light Source tungsten lamps of conservation, and exposure to light.
Light Detector silicon photocells with narrow band interference filter @ 420 nm and 525 nm
The HI96785 uses direct measurement
Power Supply 9V battery
to determine honey coloration ranging
after ten minutes of non-use in measurement mode; after one hour from 0 to 150 mm Pfund. This photometer
Auto-off
of non-use in calibration mode; with last reading reminder
has a tungsten lamp with a narrow band
Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing interference filter to isolate the 420 nm and
Dimensions 192 x 104 x 69 mm (7.6 x 4.1 x 2.7”) 525 nm wavelength. All samples are measured
Weight 320g (11.3 oz.) in a square cuvette having a 10 mm light path
and are compared to a glycerol standard.
Method direct measure
The percent light transmittance readings
HI96785 is supplied with sample cuvettes (5), 9V battery, light shield cap, are directly displayed as mm Pfund. With its
Ordering
cuvette wiping cloth, rigid carrying case, instrument quality certificate
Information and instruction manual.
advanced optical system, the highly precise
meter eliminates subjectivity to provide
HI93703-57 glycerol, (4) 30 mL
readings that are accurate and repeatable.
consists of 90 matched square cuvettes, 30 mL of glycerol
Accessories HI93703-56
and (2) 5 mL syringes (75 tests average) The table upper left reports the USDA
HI70662 cleaning solution for honey meter (30 mL) classification for honey samples and the
related mm Pfund values.
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
see page 10.42 for general accessories www.hannainst.com | 10.59
HI96704
10 Hydrazine Portable
Photometer
• CAL Check™
·· Allows for performance verification
and calibration of the meter using
NIST traceable standards.
• GLP
·· Review of the last calibration date.
• Auto-shut off
·· Automatic shut off after 10 minutes
of non-use when the meter is in
Photometers
lamp, a narrow band interference filter, adaptation of the ASTM Manual of Water and Environmental Technology,
Method
and silicon photodetector ensure accurate method D1385-88 for natural and treated water
photometric readings every time. The HI96704 is supplied with sample cuvettes (2) with caps, 9V battery, instrument
Hanna exclusive CAL Check feature utilizes quality certificate and instruction manual.
ready-made, NIST traceable standards to Ordering
CAL Check standards and testing reagents sold separately
verify both meter validation and calibration. HI96704C includes photometer, CAL Check standards, sample cuvettes (2) with
Information
caps, 9V battery, cuvette wiping cloth, instrument quality certificate, instruction
The exclusive cuvette locking system
manual and rigid carrying case.
ensures that the cuvette is inserted into the Reagents sold separately
measurement cell in the same position every
HI96704-11 CAL Check standard cuvettes
time to maintain a consistent path length. Reagents and
HI93704-01 reagents for 100 tests
Standards
HI93704-03 reagents for 300 tests
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
10.60 | www.hannainst.com see page 10.42 for general accessories
HI96718
Iodine Portable 10
Photometer
• CAL Check™
·· Allows for performance verification
and calibration of the meter using
NIST traceable standards.
• GLP
·· Review of the last calibration date.
• Auto-shut off
·· Automatic shut off after 10 minutes
of non-use when the meter is in
Photometers
measurement mode. Prevents
wastage of batteries in the event
the meter is accidentally left on.
• Battery status indicator
·· Indicates the amount of
battery life left.
• Built-in timer
·· Display of time remaining before
a measurement is taken. Ensures
that all readings are taken at the
appropriate reaction intervals
for the test being performed.
Significance of Use • Error messages
The disinfectant properties of iodine have led to its use as an alternative to chlorine and ·· Messages on display alerting to
bromine. Unlike chlorinated pools, water treated with iodine decreases eye irritation among problems including no cap, high
swimmers and provides a level of disinfection more stable to adverse conditions. However, its zero, and standard too low.
toxic and corrosive properties, along with the difficulties of dissolving it in water, have limited • Cooling lamp indicator
its widespread acceptance. One of the most common applications of iodine is in poultry industry ·· To maintain the desirable wavelength
process water. to be used for absorbance, it is
necessary to ensure components are not
overheated from the heat generated by
the tungsten lamp. Each photometer
Specifications HI96718 Iodine
is designed to allow a minimal amount
Range 0.0 to 12.5 mg/L (ppm) of time for components to cool. The
portable
Resolution 0.1 mg/L cooling lamp indicator is displayed
Accuracy @ 25°C (77°F) ±0.1 mg/L ±5% of reading prior to a reading being taken.
Light Source tungsten lamp • Units of measure
Light Detector silicon photocell with narrow band interference filter @ 525 nm ·· Appropriate unit of measure is
displayed along with reading.
Power Supply 9V battery
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
see page 10.42 for general accessories www.hannainst.com | 10.61
HI96746 · HI96721
10 Iron Portable
Photometers
• CAL Check™
·· Allows for performance verification
and calibration of the meter using
NIST traceable standards.
• GLP
·· Review of the last calibration date.
• Auto-shut off
·· Automatic shut off after 10 minutes
of non-use when the meter is in
Photometers
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
10.62 | www.hannainst.com see page 10.42 for general accessories
HI96748 · HI96709
Manganese 10
Portable
Photometers
• CAL Check™
·· Allows for performance verification
and calibration of the meter using
NIST traceable standards.
• GLP
·· Review of the last calibration date.
• Auto-shut off
Photometers
·· Automatic shut off after 10 minutes
of non-use when the meter is in
measurement mode. Prevents
wastage of batteries in the event
the meter is accidentally left on.
• Battery status indicator
·· Indicates the amount of
battery life left.
• Built-in timer
·· Display of time remaining before
a measurement is taken. Ensures
Significance of Use that all readings are taken at the
Manganese is one of the most common metals present in nature and is used in many industrial appropriate reaction intervals
applications, for example, the production of fertilizers and in the pharmaceutical industry. for the test being performed.
Manganese salts are also used in iron alloys (steel manufacturing) and non-iron alloys as it
• Error messages
improves their corrosion resistance and hardness.
·· Messages on display alerting to
problems including no cap, high
HI96748 HI96709
zero, and standard too low.
Specifications Manganese, LR Manganese, HR
Range 0 to 300 µg/L (ppb) 0.0 to 20.0 mg/L (ppm)
• Cooling lamp indicator
·· To maintain the desirable wavelength
Resolution 1 µg/L 0.1 mg/L
to be used for absorbance, it is
Accuracy @ 25°C (77°F) ±10 µg/L ±3% of reading ±0.2 mg/L ±3% of reading necessary to ensure components are not
Light Source tungsten lamp overheated from the heat generated by
the tungsten lamp. Each photometer
portable
Light Detector silicon photocell with narrow band interference filter @ 525 nm
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
see page 10.42 for general accessories www.hannainst.com | 10.63
HI96759
10 Maple Syrup
Portable Photometer
• Calibrates 100% transmittance
with glycerol reference standard
• Uses 560 nm wavelength
• Disposable 10 mm square cuvettes
• Ideal for new Vermont (IMSI) standards
• Conforms to USDA specifications
• GLP
·· Review of the last calibration date
Photometers
or greater than 75%. The darkest grade has Light Source tungsten lamp
a light transmittance of less than 25%. The Light Detector silicon photocell with narrow band interference filter 560 nm
grade of maple syrup can be determined by Power Supply 9V battery
using color comparators or by an instrument
after ten minutes of non-use in measurement mode; after one hour
that measures how much light is transmitted Auto-off
of non-use in calibration mode; with last reading reminder
through the syrup at a particular wavelength.
Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing
HI96759 are supplied with square sample cuvettes (6), light shield cap, 5 mL syringes (2),
Ordering
30 mL bottle of glycerol, cuvette wiping cloth, 9V battery, instrument quality certificate,
Information instruction manual and rigid carrying case.
10.64 | www.hannainst.com
HI96730
Molybdenum 10
Portable
Photometer
• CAL Check™
·· Allows for performance verification
and calibration of the meter using
NIST traceable standards.
• GLP
·· Review of the last calibration date.
• Auto-shut off
Photometers
·· Automatic shut off after 10 minutes
of non-use when the meter is in
measurement mode. Prevents
wastage of batteries in the event
the meter is accidentally left on.
• Battery status indicator
·· Indicates the amount of
battery life left.
• Built-in timer
·· Display of time remaining before
a measurement is taken. Ensures
that all readings are taken at the
appropriate reaction intervals
for the test being performed.
• Error messages
·· Messages on display alerting to
problems including no cap, high
zero, and standard too low.
Significance of Use
• Cooling lamp indicator
Molybdenum is commonly used in creating many types of high strength and steel alloys. It has the ·· To maintain the desirable wavelength
ability to withstand extremely high temperatures without significant expansion or softening to be used for absorbance, it is
and displays a high resistance to corrosion. Wastewater from industries that use molybdenum necessary to ensure components are not
must be treated to remove high amounts before discharge into the public collection system. overheated from the heat generated by
the tungsten lamp. Each photometer
portable
is designed to allow a minimal amount
of time for components to cool. The
Specifications HI96730 Molybdenum cooling lamp indicator is displayed
Range 0.0 to 40.0 mg/L (ppm) prior to a reading being taken.
Resolution 0.1 mg/L
• Units of measure
Accuracy @ 25°C (77°F) ±0.3 mg/L ±5% of reading ·· Appropriate unit of measure is
Light Source tungsten lamp displayed along with reading.
Light Detector silicon photocell with narrow band interference filter @ 420 nm
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
see page 10.42 for general accessories www.hannainst.com | 10.65
HI96740 · HI96726
10 Nickel Portable
Photometers
• CAL Check™
·· Allows for performance verification
and calibration of the meter using
NIST traceable standards.
• GLP
·· Review of the last calibration date.
• Auto-shut off
·· Automatic shut off after 10 minutes
of non-use when the meter is in
Photometers
Accuracy @ 25°C (77°F) ±0.010 mg/L ±7% of reading ±0.07 mg/L ±4% of reading
cooling lamp indicator is displayed
Light Source tungsten lamp
prior to a reading being taken.
Light Detector silicon photocell with narrow band interference filter @ 575 nm
• Units of measure Power Supply 9V battery
·· Appropriate unit of measure is after ten minutes of non-use in measurement mode; after one hour
Auto-off
displayed along with reading. of non-use in calibration mode; with last reading reminder
Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing
Dimensions 192 x 102 x 67 mm (7.6 x 4.4 x 2.6”)
The HI96740 portable photometer is for Weight 320g (11.3 oz.)
low range measurement of nickel while the adaptation of the 1-(2-pyridylazo)-2-
Method adaptation of the photometric method
HI96726 is for high range. Hanna's portable naphtol PAN method
photometers feature an advanced optical HI96726 and HI96740 is supplied with sample cuvettes (2) with caps, 9V battery,
system; the combination of a special tungsten instrument quality certificate and instruction manual.
lamp, a narrow band interference filter, CAL Check standards and testing reagents sold separately
Ordering
and silicon photodetector ensure accurate Information
HI96726C and HI96740C include photometer, CAL Check standards, sample cuvettes
photometric readings every time. The (2) with caps, 9V battery, scissors, cuvette wiping cloth, instrument quality certificate,
instruction manual and rigid carrying case.
Hanna exclusive CAL Check feature utilizes
Reagents sold separately
ready-made, NIST traceable standards to
HI96740-11 CAL Check tandard cuvettes
verify both meter validation and calibration.
HI96740 HI93740-01 reagents for 50 tests
The exclusive cuvette locking system
ensures that the cuvette is inserted into the Reagents and HI93740-03 reagents for 150 tests
measurement cell in the same position every Standards HI96726-11 CAL Check standard cuvettes
time to maintain a consistent path length. HI96726 HI93726-01 reagents for 100 tests
HI93726-03 reagents for 300 tests
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
10.66 | www.hannainst.com see page 10.42 for general accessories
HI96728 · HI96786
Nitrate Portable 10
Photometers
• CAL Check™
·· Allows for performance verification
and calibration of the meter using
NIST traceable standards.
• GLP
·· Review of the last calibration date.
• Auto-shut off
·· Automatic shut off after 10 minutes
of non-use when the meter is in
Photometers
measurement mode. Prevents
wastage of batteries in the event
the meter is accidentally left on.
• Battery status indicator
·· Indicates the amount of
battery life left.
• Built-in timer
·· Display of time remaining before
a measurement is taken. Ensures
that all readings are taken at the
appropriate reaction intervals
for the test being performed.
Significance of Use • Error messages
Nitrogen is abundant in the Earth’s atmosphere and is present in water in the form of nitrate, ·· Messages on display alerting to
nitrite, and ammonia. Plants use nitrogen as a nutrient to build proteins by tracking it in through problems including no cap, high
their root system. Nitrate is formed in water mainly through rainfall, decomposition of organic zero, and standard too low.
matter, and runoff from manmade pollutants such as sewage waste and fertilizers. Almost
• Cooling lamp indicator
all surface waters have a measurable level of nitrate, and a moderate amount is considered
·· To maintain the desirable wavelength
beneficial. Large amounts of nitrate, however, can lead to eutrophication which may result in
to be used for absorbance, it is
decreased levels of dissolved oxygen in the water.
necessary to ensure components are not
HI96728 HI96786 overheated from the heat generated by
Specifications Nitrate-Nitrogen Nitrate the tungsten lamp. Each photometer
Range 0.0 to 30.0 mg/L (ppm) 0 to 100 mg/L (ppm) is designed to allow a minimal amount
of time for components to cool. The
portable
Resolution 0.1 mg/L 1 mg/L
Accuracy @ 25°C (77°F) ±0.5 mg/L ±10% of reading ±5 mg/L ±5% of reading cooling lamp indicator is displayed
Light Source tungsten lamp
prior to a reading being taken.
Light Detector silicon photocell with narrow band interference filter @ 525 nm • Units of measure
Power Supply 9V battery ·· Appropriate unit of measure is
after ten minutes of non-use in measurement mode; after one hour displayed along with reading.
Auto-off
of non-use in calibration mode; with last reading reminder
Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing
Dimensions 192 x 104 x 69 mm (7.6 x 4.1 x 2.7”) The HI96728 and HI96786 portable
Weight 320g (11.3 oz.) photometers are for the measurement
Method adaptation of cadmium reduction method causes amber tint in sample of nitrate. Hanna's portable photometers
HI96728 and HI96786 are supplied with sample cuvettes (2) with caps, 9V battery, feature an advanced optical system; the
instrument quality certificate and instruction manual. combination of a special tungsten lamp, a
CAL Check standards and testing reagents sold separately narrow band interference filter, and silicon
Ordering
Information
HI96728C and HI76786C include photometer, CAL Check standards, sample cuvettes photodetector ensure accurate photometric
(2) with caps, 9V battery, scissors, cuvette wiping cloth, instrument quality certificate, readings every time. The Hanna exclusive
instruction manual and rigid carrying case.
CAL Check feature utilizes ready-made, NIST
Reagents sold separately
traceable standards to verify both meter
HI96728-11 CAL Check standard cuvettes
validation and calibration. The exclusive
HI96728 HI93728-01 reagents for 100 tests
cuvette locking system ensures that the
Reagents and HI93728-03 reagents for 300 tests
cuvette is inserted into the measurement cell
Standards HI96786-11 CAL Check standard cuvettes
in the same position every time to maintain a
HI96786 HI93728-01 reagents for 100 tests consistent path length.
HI93728-03 reagents for 300 tests
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
see page 10.42 for general accessories www.hannainst.com | 10.67
HI96707 · HI96708
10 Nitrite Portable
Photometers
• CAL Check™
·· Allows for performance verification
and calibration of the meter using
NIST traceable standards
• GLP
·· Review of the last calibration date
• Auto-shut off
• Battery status indicator
Photometers
• Built-in timer
·· Display of time remaining before
a measurement is taken. Ensures
that all readings are taken at the
appropriate reaction intervals
for the test being performed.
• Error messages
·· Messages on display alerting to
problems including no cap, high
zero, and standard too low
• Cooling lamp indicator
• Units of measure
·· Appropriate unit of measure is
displayed along with reading
of a special tungsten lamp, a narrow band Accuracy @ 25°C (77°F) ±0.020 mg/L ±4% of reading ±4 mg/L ±4% of reading
interference filter, and silicon photodetector Light Source tungsten lamp
ensure accurate photometric readings every
portable
silicon photocell with narrow band silicon photocell with narrow band
time. The Hanna exclusive CAL Check feature Light Detector
interference filter @ 525 nm interference filter @ 575 nm
utilizes ready-made, NIST traceable standards
Power Supply 9V battery
to verify both meter validation and calibration.
The exclusive cuvette locking system after ten minutes of non-use in measurement mode; after one hour
Auto-off
of non-use in calibration mode; with last reading reminder
ensures that the cuvette is inserted into the
measurement cell in the same position every Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing
time to maintain a consistent path length. Dimensions 192 x 104 x 69 mm (7.6 x 4.1 x 2.7”)
to humans. They are, therefore, normally HI96707-11 CAL Check standard cuvettes
monitored to verify the quality of water for HI96707 HI93707-01 powder reagents for 100 tests
domestic use, as well as lakes and ponds.
Reagents and HI93707-03 powder reagents for 300 tests
Nitrites are an intermediate product in the Standards HI96708-11 CAL Check standard cuvettes
nitrogen cycle and are produced by ammonia HI96708 HI93708-01 reagents for 100 tests
oxidation with water, or even originate in HI93708-03 reagents for 300 tests
industrial waste directly. They must not be
present in drinking water.
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
10.68 | www.hannainst.com see page 10.42 for general accessories
HI96732
Dissolved Oxygen 10
Portable
Photometer
• CAL Check™
·· Allows for performance verification
and calibration of the meter using
NIST traceable standards.
• GLP
·· Review of the last calibration date.
• Auto-shut off
Photometers
·· Automatic shut off after 10 minutes
of non-use when the meter is in
measurement mode. Prevents
wastage of batteries in the event
the meter is accidentally left on.
• Battery status indicator
·· Indicates the amount of
battery life left.
• Built-in timer
·· Display of time remaining before
a measurement is taken. Ensures
that all readings are taken at the
appropriate reaction intervals
for the test being performed.
Significance of Use • Error messages
Dissolved oxygen analysis measures the amount of gaseous oxygen (O<sub>2</sub>) dissolved ·· Messages on display alerting to
in an aqueous solution. Dissolved oxygen is one of the most important parameters in aquatic problems including no cap, high
systems. This gas is required for metabolism by aerobic organisms and also influences inorganic zero, and standard too low.
chemical reactions. Therefore, knowledge of the solubility and dynamics of oxygen distribution
• Cooling lamp indicator
is essential to interpreting both biological and chemical processes within water bodies. Oxygen
·· To maintain the desirable wavelength
gets into water by diffusion from the surrounding air by aeration (rapid movement) and as a
to be used for absorbance, it is
product of photosynthesis. The amount of oxygen (or any gas) that can dissolve in pure water
necessary to ensure components are not
(saturation point) is inversely proportional to the temperature of the water; the warmer the
overheated from the heat generated by
water, the less dissolved oxygen is present.
the tungsten lamp. Each photometer
portable
is designed to allow a minimal amount
Specifications HI96732 Oxygen, Dissolved of time for components to cool. The
Range 0.0 to 10.0 mg/L (ppm) cooling lamp indicator is displayed
Resolution 0.1 mg/L prior to a reading being taken.
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
see page 10.42 for general accessories www.hannainst.com | 10.69
HI96713 · HI96717
10 Phosphate Portable
Photometers
• CAL Check™
·· Allows for performance verification
and calibration of the meter using
NIST traceable standards
• GLP
·· Review of the last calibration date
• Auto-shut off
• Battery status indicator
Photometers
• Built-in timer
·· Display of time remaining before
a measurement is taken. Ensures
that all readings are taken at the
appropriate reaction intervals
for the test being performed.
• Error messages
·· Messages on display alerting to
problems including no cap, high
zero, and standard too low
• Cooling lamp indicator
The exclusive cuvette locking system silicon photocell with narrow band silicon photocell with narrow band
Light Detector
portable
ensures that the cuvette is inserted into the interference filter @ 610 nm interference filter @ 525 nm
Phosphates are present in a number of Dimensions 192 x 104 x 69 mm (7.6 x 4.1 x 2.7”)
products that are used by humans everyday. Weight 320g (11.3 oz.)
Some examples of the effects of phosphates
Amino Acid Method, adapted from Standard
are enhancing the flavor and tartness of cola Method adaptation of the ascorbic acid method Method for the Examination of Water and
drinks, as a buffering agent in controlling Wastewater
pH in antifreeze and delaying darkening of HI96713 and HI96717 are supplied with sample cuvettes (2) with caps, 9V battery,
cut potatoes used in making french fries. instrument quality certificate and instruction manual.
Phosphates are also extensively used in CAL Check standards and testing reagents sold separately
Ordering
detergents and cleaning fluids because of their HI96713C and HI96717C include photometer, CAL Check standards, sample cuvettes
Information
ability to soften water and remove soil deposits. (2) with caps, 9V battery, scissors, cuvette wiping cloth, instrument quality certificate,
instruction manual and rigid carrying case.
Reagents sold separately
Phosphates are particularly important for
the growth and development of plant roots, HI96713-11 CAL Check standard cuvettes
and hence are one of the most common HI96713 HI93713-01 reagents for 100 tests
fertilizers used in agriculture. However, high Reagents and HI93713-03 reagents for 300 tests
concentrations of phosphates in agricultural Standards HI96717-11 CAL Check standard cuvettes
runoff can cause environmental pollution, as
HI96717 HI93717-01 reagents for 100 tests
they are a primary cause of eutrophication. Local
HI93717-03 reagents for 300 tests
laws govern the use of phosphates and the
discharge levels into streams.
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
10.70 | www.hannainst.com see page 10.42 for general accessories
HI96706
Phosphorus 10
Portable
Photometer
• CAL Check™
·· Allows for performance verification
and calibration of the meter using
NIST traceable standards.
• GLP
·· Review of the last calibration date.
• Auto-shut off
Photometers
·· Automatic shut off after 10 minutes
of non-use when the meter is in
measurement mode. Prevents
wastage of batteries in the event
the meter is accidentally left on.
• Battery status indicator
·· Indicates the amount of
battery life left.
• Built-in timer
·· Display of time remaining before
a measurement is taken. Ensures
that all readings are taken at the
Significance of Use appropriate reaction intervals
Common in natural systems, such as lakes, oceans, and soil, phosphorus is an essential element for the test being performed.
for plant and animal growth. However, when present in large concentrations, phosphorus can
• Error messages
cause excessive microorganism and algae growth. For hobbyists with saltwater aquaria, a high
·· Messages on display alerting to
amount of phosphorus can problematic to fish and coral. The main source of phosphorus in reef
problems including no cap, high
aquaria is through food that is introduced on a daily basis, but it is also produced through the
zero, and standard too low.
breakdown of plant material and excretion from fish. Replacement water can also be a source of
phosphorus in aquaria, where tap water or reverse osmosis water is used to replace evaporated • Cooling lamp indicator
water and control the salt concentration in tanks. Both forms of water contain phosphorus, ·· To maintain the desirable wavelength
albeit in varying concentrations, and will have negative effects if the accumulating levels are to be used for absorbance, it is
not controlled. Phosphorus is also responsible for corrosion for corrosion of piping systems if necessary to ensure components are not
present in high enough amounts. overheated from the heat generated by
the tungsten lamp. Each photometer
portable
Specifications HI96706 Phosphorus is designed to allow a minimal amount
Range 0.0 to 15.0 mg/L (ppm) of time for components to cool. The
Resolution 0.1 mg/L cooling lamp indicator is displayed
Accuracy @ 25°C (77°F) ± 0.3 mg/L ±4% of reading
prior to a reading being taken.
Light Source tungsten lamp • Units of measure
Light Detector silicon photocell with narrow band interference filter @ 525 nm ·· Appropriate unit of measure is
Power Supply 9V battery displayed along with reading.
after ten minutes of non-use in measurement mode; after one hour
Auto-off
of non-use in calibration mode; with last reading reminder
Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing
The HI96706 portable photometer is for
Dimensions 192 x 104 x 69 mm (7.6 x 4.1 x 2.7”)
the measurement of phosphorus. Hanna's
Weight 320g (11.3 oz.)
portable photometers feature an advanced
Amino Acid Method, adapted from Standard Method for the Examination of optical system; the combination of a special
Method
Water and Wastewater
tungsten lamp, a narrow band interference
HI96706 is supplied with sample cuvettes (2) with caps, 9V battery, instrument
filter, and silicon photodetector ensure
quality certificate and instruction manual
CAL Check standards and testing reagents sold separately
accurate photometric readings every time.
Ordering The Hanna exclusive CAL Check feature
HI96706C includes photometer, CAL Check standards, sample cuvettes (2)
Information utilizes ready-made, NIST traceable standards
with caps, 9V battery, scissors, cuvette wiping cloth, instrument quality certificate,
instruction manual and rigid carrying case. to verify both meter validation and calibration.
Reagents sold separately
The exclusive cuvette locking system
HI96706-11 CAL Check standard cuvettes ensures that the cuvette is inserted into the
Reagents and
HI93706-01 reagents for 100 tests measurement cell in the same position every
Standards
HI93706-03 reagents for 300 tests time to maintain a consistent path length.
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
see page 10.42 for general accessories www.hannainst.com | 10.71
HI96750
10 Potassium Portable
Photometer
• CAL Check™
·· Allows for performance verification
and calibration of the meter using
NIST traceable standards.
• GLP
·· Review of the last calibration date.
• Auto-shut off
·· Automatic shut off after 10 minutes
of non-use when the meter is in
Photometers
cooling lamp indicator is displayed Range 0.0 to 10.0 mg/L (ppm) 10 to 100 mg/L (ppm)
Accuracy @ 25°C (77°F) ±1.5 mg/L ±7% of reading ±15 mg/L ±7% of reading
• Units of measure
·· Appropriate unit of measure is Light Source light emitting diode
displayed along with reading. Light Detector silicon photocell with narrow band interference filter @ 466 nm
and silicon photodetector ensure accurate Method Tetraphenylborate method causes turbidity in the sample
photometric readings every time. The Hanna HI96750 is supplied with sample cuvettes (2) with caps, 9V battery, instrument
exclusive CAL Check feature utilizes ready- quality certificate and instruction manual.
made, NIST traceable standards to verify both Ordering
CAL Check standards and testing reagents sold separately
meter validation and calibration. The exclusive HI96750C includes photometer, CAL Check standards, sample cuvettes (2) with
Information
caps, 9V battery, 1000 mL automatic pipette, tips, scissors, cuvette wiping cloth,
cuvette locking system ensures that the
instrument quality certificate, instruction manual and rigid carrying case.
cuvette is inserted into the measurement cell Reagents sold separately
in the same position every time to maintain a
HI96750-11 CAL Check standard cuvettes
consistent path length. Reagents and
HI93750-01 reagents for 100 tests
Standards
HI93750-03 reagents for 300 tests
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
10.72 | www.hannainst.com see page 10.42 for general accessories
HI96705 · HI96770
Silica Portable 10
Photometers
• CAL Check™
·· Allows for performance verification
and calibration of the meter using
NIST traceable standards
• GLP
·· Review of the last calibration date
• Auto-shut off
• Battery status indicator
Photometers
• Built-in timer
·· Display of time remaining before
a measurement is taken. Ensures
that all readings are taken at the
appropriate reaction intervals
for the test being performed.
• Error messages
·· Messages on display alerting to
problems including no cap, high
zero, and standard too low
• Cooling lamp indicator
• Units of measure
·· Appropriate unit of measure is
displayed along with reading
HI96705 HI96770
Specifications Silica Silica HR The HI96705 and HI96770 portable
Range 0.00 to 2.00 mg/L (ppm) 0 to 200 mg/L (ppm) photometers are for the measurement of
Resolution 0.01 mg/L 1 mg/L
silica. Hanna's portable photometers feature
an advanced optical system; the combination
Accuracy @ 25°C (77°F) ±0.03 mg/L ±3% of reading ±1 mg/L ±5% of reading
of a special tungsten lamp, a narrow band
Light Source tungsten lamp light emitting diode
interference filter, and silicon photodetector
Light Detector
silicon photocell with narrow band silicon photocell with narrow band ensure accurate photometric readings
interference filter @ 610 nm interference filter @ 466 nm every time. The Hanna exclusive CAL Check
portable
Power Supply 9V battery feature utilizes ready-made, NIST traceable
after ten minutes of non-use in measurement mode; after one hour standards to verify both meter validation
Auto-off
of non-use in calibration mode; with last reading reminder and calibration. The exclusive cuvette locking
Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing
system ensures that the cuvette is inserted
into the measurement cell in the same
Dimensions 192 x 104 x 69 mm (7.6 x 4.1 x 2.7”)
position every time to maintain a consistent
Weight 320g (11.3 oz.)
path length.
adaptation of the USEPA method 370.1
adaptation of the ASTM D859, heteropoly for drinking, surface and saline waters,
Method
blue method domestic and industrial wastes and Standard
Significance of Use
Method 4500-SiO2 C
Silica is found in all natural waters in the
HI96705 and HI96770 are supplied with sample cuvettes (2) with caps, 9V battery, dissolved mineral form. Silica is only slightly
instrument quality certificate and instructions.
soluble in water and can be found as ionic
CAL Check standards and testing reagents sold separately
Ordering silica, silicates, or colloidal or suspended
HI96705C and HI96770C include photometer, CAL Check standards, sample cuvettes
Information particles. The solubility of silica is highly
(2) with caps, 9V battery, scissors, cuvette wiping cloth, instrument quality certificate,
instruction manual and rigid carrying case. dependent on pH, temperature and pressure.
Reagents sold separately Silica’s presence in industrial applications,
HI96705-11 CAL Check standard cuvettes particularly high pressure turbines, is
HI96705 HI93705-01 reagents for 100 tests
undesirable because of the scaling caused
by the elevated temperature and pressure.
Reagents and HI93705-03 reagents for 300 tests
Heating systems and reverse osmosis plants
Standards HI96770-11 CAL Check standard cuvettes also require monitoring of silica to ensure
HI96770 HI96770-01 reagents for 100 tests process efficiency.
HI96770-03 reagents for 300 tests
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
see page 10.42 for general accessories www.hannainst.com | 10.73
HI96737
10 Silver Portable
Photometer
• CAL Check™
·· Allows for performance verification
and calibration of the meter using
NIST traceable standards.
• GLP
·· Review of the last calibration date.
• Auto-shut off
·· Automatic shut off after 10 minutes
of non-use when the meter is in
Photometers
Hanna exclusive CAL Check feature utilizes Weight 320g (11.3 oz.)
ready-made, NIST traceable standards to Method adaptation of the PAN method
verify both meter validation and calibration.
HI96737 is supplied with sample cuvettes (2) with caps, 9V battery,
The exclusive cuvette locking system Ordering
instrument quality certificate and instruction manual.
ensures that the cuvette is inserted into the Information CAL Check standards and testing reagents sold separately
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
10.74 | www.hannainst.com see page 10.42 for general accessories
HI96751
Sulfate Portable 10
Photometer
• CAL Check™
·· Allows for performance verification
and calibration of the meter using
NIST traceable standards.
• GLP
·· Review of the last calibration date.
• Auto-shut off
·· Automatic shut off after 10 minutes
of non-use when the meter is in
Photometers
measurement mode. Prevents
wastage of batteries in the event
the meter is accidentally left on.
• Battery status indicator
·· Indicates the amount of
battery life left.
• Built-in timer
·· Display of time remaining before
a measurement is taken. Ensures
that all readings are taken at the
appropriate reaction intervals
for the test being performed.
• Error messages
·· Messages on display alerting to
problems including no cap, high
Significance of Use
zero, and standard too low.
Sulfate is widely present within natural waters in different concentrations. Sulfate
concentration is to be kept within a strict range for drinking water, especially since this • Cooling lamp indicator
value can be high near mine drainage points. Sulfate is also rigorously tested in the ·· To maintain the desirable wavelength
production of beverages such as beer, due to its significant effect upon odor and taste. to be used for absorbance, it is
necessary to ensure components are not
overheated from the heat generated by
the tungsten lamp. Each photometer
Specifications HI96751 Sulfate is designed to allow a minimal amount
Range 0 to 150 mg/L (ppm) of time for components to cool. The
portable
Resolution 1 mg/L cooling lamp indicator is displayed
Accuracy @ 25°C (77°F) ±1 mg/L ±5% of reading prior to a reading being taken.
Light Source light emitting diode • Units of measure
Light Detector silicon photocell with narrow band interference filter @ 466 nm ·· Appropriate unit of measure is
displayed along with reading.
Power Supply 9V battery
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
see page 10.42 for general accessories www.hannainst.com | 10.75
HI96731
10 Zinc Portable
Photometer
• CAL Check™
·· Allows for performance verification
and calibration of the meter using
NIST traceable standards.
• GLP
·· Review of the last calibration date.
• Auto-shut off
·· Automatic shut off after 10 minutes
of non-use when the meter is in
Photometers
displayed along with reading. Light Detector silicon photocell with narrow band interference filter @ 575 nm
meter validation and calibration. The exclusive Ordering HI96731C includes HI96731 photometer, CAL Check standards, sample cuvettes (2)
cuvette locking system ensures that the Information with caps, 9V battery, scissors, cuvette wiping cloth, instrument quality certificate,
instruction manual and rigid carrying case.
cuvette is inserted into the measurement cell CAL Check standards and testing reagents sold separately
in the same position every time to maintain a
HI96731-11 CAL Check standard cuvettes
consistent path length. Reagents and
HI93731-01 reagents for 100 tests
Standards
HI93731-03 reagents for 300 tests
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
10.76 | www.hannainst.com see page 10.42 for general accessories
HI96101
Bromine, Chlorine, 10
Cyanuric Acid, Iron
Iodine and pH
Portable
Photometer
• CAL Check™
·· Allows for performance verification
and calibration of the meter using
NIST traceable standards
Photometers
• Auto-shut off
• Built-in timer
·· Display of time remaining before
a measurement is taken
portable
@ 25°C (77°F) time to maintain a consistent path length.
Bromine (P6) Iron LR (P7)
Range 0.00 to 10.00 mg/L (ppm) 0.00 to 1.60 mg/L (ppm) Reagents and Standards
Resolution 0.01 mg/L 0.01 mg/L CAL Check standard cuvettes
HI96701-11
(free Cl)
Accuracy
±0.08 mg/L ±3% of reading ±0.01 mg/L ±8% or reading HI93701-01 reagents for 100 tests (free Cl)
@ 25°C (77°F)
Light Source tungsten lamp HI96710-11 CAL Check standard cuvettes (pH)
Light Detector silicon photocell with narrow band interference filter @ 525 nm HI93710-01 reagents for 100 tests (pH)
Power Supply 9V battery CAL Check standard cuvettes
HI96711-11
after ten minutes of non-use in measurement mode; after one hour (total CI)
Auto-off
of non-use in calibration mode; with last reading reminder HI93711-01 reagents for 100 tests (total CI)
Additional Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing CAL Check standard cuvettes
HI96716-11
Specifications (bromine)
Dimensions 192 x 104 x 69 mm (7.6 x 4.1 x 2.7”)
HI93716-01 reagents for 100 tests (bromine)
Weight 320g (11.3 oz.)
CAL Check standard cuvettes
HI96718-11
Bromine: adaptation of the EPA, DPD method; Chlorine: adaptation of the (iodine)
USEPA method and Standard Method 4500-Cl G; Cyanuric Acid: adaptation
Method HI93718-01 reagents for 100 tests (iodine)
of the turbidimetric method; Iodine: adaptation of the EPA, DPD method;
Iron LR: adaptation of the TPTZ method; pH: Phenol Red method CAL Check standard cuvettes
HI96722-11
(cyanuric acid)
HI96101 is supplied with sample cuvettes (2) with caps, 9V battery, instrument quality
reagents for 100 tests
certificate and instruction manual. HI93722-01
(cyanuric acid)
Ordering CAL Check standards and testing reagents sold separately
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
see page 10.42 for general accessories www.hannainst.com | 10.77
HI96104
• Built-in timer
·· Display of time remaining before
a measurement is taken
Specifications
disinfectant used by homeowners, hotels, Chlorine, Total (P3) Cyanuric Acid (P4)
and commercial businesses. In swimming Range 0.00 to 5.00mg/L (ppm) 0 to 80 mg/L (ppm)
pools, spas, and similar applications, cyanuric
0.01 mg/L under 3.50 mg/L;
acid helps to stabilize chlorine and prevent its Resolution
0.10 mg/L above 3.50 mg/L
1 mg/L
breakdown, especially in sunlight. Frequent
Accuracy ±0.03 mg/L ±3% ±1 mg/L ±15%
testing of both cyanuric acid and pH helps to
@ 25°C (77°F) of reading of reading
minimize chlorine consumption.
Light Source tungsten lamp
Reagents and Standards
Light Detector silicon photocell with narrow band interference filter @ 525 nm
CAL Check standard cuvettes
HI96701-11
(free Cl) Power Supply 9V battery
HI93701-01 reagents for 100 tests (free Cl) after ten minutes of non-use in measurement mode; after one hour of
Auto-off
HI93701-03 reagents for 300 tests (free Cl) non-use in calibration mode; with last reading reminder
Additional
HI96710-11 CAL Check standard cuvettes (pH) Specifications Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing
HI93710-01 reagents for 100 tests (pH)
HI93710-03 reagents for 300 tests (pH) Dimensions 192 x 104 x 69 mm (7.6 x 4.1 x 2.7”)
CAL Check standard cuvettes Weight 320g (11.3 oz.)
HI96711-11
(total CI)
pH: phenol red method; Cl: adaptation of the EPA recommended DPD
HI93711-01 reagents for 100 tests (total CI) Method
method 330.5; Cyanuric Acid: adaptation of the Turbidimetric method
HI93711-03 reagents for 300 tests (total CI)
CAL Check standard cuvettes HI96104 is supplied with sample cuvettes (2) with caps, 9V battery, instrument quality
HI96722-11
(cyanuric acid) certificate and instruction manual.
reagents for 100 tests Ordering CAL Check standards and testing reagents sold separately
HI93722-01
(cyanuric acid) Information HI96104C includes photometer, CAL Check standards, sample cuvettes (2) with caps,
reagents for 300 tests scissors, cuvette wiping cloth, 9V battery, instruction manual and rigid carrying case.
HI93722-03 Reagents sold separately
(cyanuric acid)
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
10.78 | www.hannainst.com see page 10.42 for general accessories
HI96725
Chlorine, Cyanuric 10
Acid and pH Portable
Photometer
for Legionella Protection
• CAL Check™
·· Allows for performance verification
and calibration of the meter using
NIST traceable standards
• Auto-shut off
Photometers
• Built-in timer
·· Display of time remaining before
a measurement is taken
Significance of Use
Legionella species is the agent that causes
human Legionnaires’ disease as well as the
lesser form, Pontiac Fever. Transmission is
Since Legionella is especially harmful to people with weakened facilitated by the inhalation of mist droplets
immune systems, it should be actively checked for in the containing the Legionella bacteria.
water systems of hospitals and nursing homes.
Common sources of Legionella include
cooling towers used in industrial cooling
Specifications HI96725 Chlorine, Cyanuric Acid and pH water systems as well as in large central air
Chlorine, Free (P1) Chlorine, Total (P2)
conditioning systems, domestic hot water
systems, fountains, and similar disseminators
Range 0.00 to 5.00 mg/L (ppm) 0.00 to 5.00 mg/L (ppm)
that draw from a public water supply. Natural
0.01 mg/L under 3.50 mg/L; 0.01 mg/L under 3.50 mg/L; sources include freshwater ponds and creeks.
Resolution
0.10 mg/L above 3.50 mg/L 0.10 mg/L above 3.50 mg/L
portable
Cyanuric Acid (P3) pH (P4)
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
see page 10.42 for general accessories www.hannainst.com | 10.79
HI96710
a measurement is taken
Significance of Use
Three critical parameters that can be tested
to ensure good water quality are pH, free
chlorine, and total chlorine. Chlorine is one
of the most commonly used disinfectants
for drinking water, wastewater, and water
used for pools and spas. It can be added to in
Specifications HI96710 Free and Total Chlorine and pH
various forms including calcium hypochlorite,
sodium hypochlorite, or in some instances, pH (P1) Chlorine, Free (P2) Chlorine, Total (P3)
chlorine gas. When added to water, chlorine Range 6.5 to 8.5 pH 0.00 to 5.00 mg/L (ppm)
creates hypochlorous acid (HOCl) which Parameter 0.01 mg/L under 3.50 mg/L
Resolution 0.1 pH
dissociates into hypochlorite ion (OCl¯). Specifications 0.10 mg/L above 3.50 mg/L
Accuracy
HOCl ↔ H+ + OCl¯ @ 25°C (77°F)
±0.1 pH ±0.03 mg/L ±3% of reading
hypochlorite ion Light Detector silicon photocell with narrow band interference filter @ 525 nm
portable
Information HI96710C includes photometer, CAL Check standards, sample cuvettes (2) with caps,
When chlorine is first added to water, it is scissors, cuvette wiping cloth, 9V battery, instruction manual and rigid carrying case.
available as free chlorine. The measurement Reagents sold separately
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
10.80 | www.hannainst.com see page 10.42 for general accessories
HI96711
Chlorine, Free 10
and Total Portable
Photometer
• CAL Check™
·· Allows for performance verification
and calibration of the meter using
NIST traceable standards
• Auto-shut off
• Built-in timer
·· Display of time remaining before
Photometers
a measurement is taken
portable
organic and inorganic substances. Chlorine
Light Source tungsten lamp
levels must be actively monitored to ensure
Light Detector silicon photocell with narrow band interference filter @ 525 nm
sufficient chlorine is present for disinfection,
Power Supply 9V battery as well as to control adverse effects such
after ten minutes of non-use in measurement mode; after one hour as taste, odor, and potential reactions with
Auto-off
of non-use in calibration mode; with last reading reminder organic matter to form harmful disinfection
Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing byproducts.
Dimensions 192 x 104 x 69 mm (7.6 x 4.1 x 2.7”)
Method adaptation of the USEPA method 330.5 and Standard Method 4500-Cl G
HI96711 is supplied with sample cuvettes (2) with caps, 9V battery, instrument quality
certificate and instruction manual.
CAL Check standards and testing reagents sold separately
Ordering
HI96711C includes photometer, CAL Check standards, sample cuvettes (2) with caps,
Information
9V battery, scissors, cuvette cleaning cloth, instrument quality certificate, instruction
manual and rigid carrying case.
Reagents sold separately
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
see page 10.42 for general accessories www.hannainst.com | 10.81
HI96724
a measurement is taken
Significance of Use Resolution 0.01 mg/L from 0.00 to 3.50 mg/L; 0.10 mg/L above 3.50 mg/L
As one of the oldest and most common forms Accuracy @ 25°C (77°F) ±0.03 mg/L ±3% of reading
as taste, odor, and potential reactions with Dimensions 192 x 104 x 69 mm (7.6 x 4.1 x 2.7”)
organic matter to form harmful disinfection Weight 320g (11.3 oz.)
byproducts. Method adaptation of the USEPA method 330.5 and Standard Method 4500-Cl G
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
10.82 | www.hannainst.com see page 10.42 for general accessories
HI96734
Photometers
• Built-in timer
·· Display of time remaining before
a measurement is taken
portable
Specifications Resolution 0.01 mg/L from 0.00 to 3.50 mg/L; 0.10 mg/L above 3.50mg/L applications. Its use varies from light
Accuracy application in surface sanitation, to heavy
±0.03 mg/L ±3% of reading
@ 25°C (77°F) duty disinfection of medical devices, to
Light Source tungsten lamp removal of microorganism infections in piping
Light Detector silicon photocell with narrow band interference filter @ 525 nm
systems. The advantage of using chlorine
over peroxide-type disinfectants is that
Power Supply 9V battery
chlorine is not only a strong oxidant, it also
after ten minutes of non-use in measurement mode; after one hour is capable of breaking tough chemical bonds
Auto-off
of non-use in calibration mode; with last reading reminder
Additional found in cell walls or biofilms. Correct and
Specifications Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing effective use of chlorine helps to destroy
Dimensions 192 x 104 x 69 mm (7.6 x 4.1 x 2.7”) disease-causing pathogens, reduce odors,
Weight 320g (11.3 oz.) and eliminate bacteria.
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
see page 10.42 for general accessories www.hannainst.com | 10.83
HI96771
10 Free Chlorine
Ultra High Range
Portable
Photometer
• Up to 500 ppm chlorine range
• CAL Check™
·· Allows for performance verification
and calibration of the meter using
NIST traceable standards
Photometers
• Auto-shut off
• Built-in timer
·· Display of time remaining before
a measurement is taken
cuvette is inserted into the measurement cell Light Source tungsten lamp
in the same position every time to maintain a Light Detector silicon photocell with narrow band interference filter @ 525 nm
consistent path length.
Power Supply 9V battery
after ten minutes of non-use in measurement mode; after one hour of non-use in
Significance of Use Auto-off
calibration mode; with last reading reminder
As one of the oldest and most common forms Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing
of disinfection, chlorine improves water Dimensions 192 x 104 x 69 mm (7.6 x 4.1 x 2.7”)
quality by destroying disease-producing
Weight 320g (11.3 oz.)
microorganisms and by reacting with other
adaptation of Standard Methods for the Examination of Water and Wastewater,
organic and inorganic substances. Chlorine Method
20th edition, 4500-Cl
levels must be actively monitored to ensure
sufficient chlorine is present for disinfection, HI96771 is supplied with sample cuvettes (2) with caps, 9V battery,
instrument quality certificate and instruction manual.
as well as to control adverse effects such CAL Check standards and testing reagents sold separately
as taste, odor, and potential reactions with Ordering
HI96771C includes photometer, CAL Check standards, sample cuvettes (2) with caps,
organic matter to form harmful disinfection Information
9V battery, scissors, cuvette cleaning cloth, instrument quality certificate, instruction
byproducts. manual and rigid carrying case.
Reagents sold separately
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
10.84 | www.hannainst.com see page 10.42 for general accessories
HI96736
Total Hardness 10
and pH Portable
Photometer
• CAL Check™
·· Allows for performance verification
and calibration of the meter using
NIST traceable standards
• Auto-shut off
• Built-in timer
·· Display of time remaining before
Photometers
a measurement is taken
portable
Accuracy
±0.11 mg/L ±5% of reading ±0.1 pH
@ 25°C (77°F)
Light Detector silicon photocell with narrow band interference filter @ 525 nm
HI96736 is supplied with sample cuvettes with caps (2), 9V battery, instrument quality
Ordering
certificate and instruction manual.
Information CAL Check standards and testing reagents sold separately
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
see page 10.42 for general accessories www.hannainst.com | 10.85
HI96741
10 Total Hardness
and Iron, Low Range
Portable Photometer
• CAL Check™
·· Allows for performance verification
and calibration of the meter using
NIST traceable standards
• Auto-shut off
• Built-in timer
·· Display of time remaining before
Photometers
a measurement is taken
Accuracy @
±0.11 mg/L ±5% of reading ±0.01 mg/L ±8% of reading
certain bacteria. However, low levels of iron 25°C (77°F)
Light Detector silicon photocell with narrow band interference filter @ 525 nm
The iron concentration in water needs to be
Power Supply 9V battery
monitored since it can become harmful above
certain levels. Auto-off
after ten minutes of non-use in measurement mode; after one
hour of non-use in calibration mode; with last reading reminder
Additional
Hardness, on the other hand, is indicative of Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing
Specifications
the presence of calcium and magnesium in
Dimensions 192 x 104 x 69 mm (7.6 x 4.1 x 2.7”)
water. By passing through various layers of
Weight 320g (11.3 oz.)
soil and rocks, rain water dissolves some of
the mineral substances. Total Hardness: adaptation of the Standard Methods for the
Method Examination of Water and Wastewater, 18th ed. colorimetric
method. Iron LR: Adaptation of the TPTZ method.
Hardness can cause pipe rusting in water
heating and cooling systems, reverse osmosis HI96741 is supplied with sample cuvettes with caps (2), 9V battery, instrument quality
Ordering
and demineralization plants. It can also increase certificate and instruction manual.
Information CAL Check standards and testing reagents sold separately
the consumption of soaps and detergents in
industrial washing machines or laundries. HI96719-11 CAL Check standard cuvettes (hardness)
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
10.86 | www.hannainst.com see page 10.42 for general accessories
HI96742
Photometers
• Built-in timer
·· Display of time remaining before
a measurement is taken
portable
Specifications
Accuracy metals in water can create a bittersweet or
±0.01 mg/L ±8% of reading ±2 µg/L ±3% of reading
@ 25°C (77°F) astringent taste.
Light Source tungsten lamp
The presence of iron in supplied water is
Light Detector silicon photocell with narrow band interference filter @ 525 nm
undesirable due to the staining effect on
Power Supply 9V battery
laundry and porcelain.
after ten minutes of non-use in measurement mode; after one hour
Auto-off
Additional of non-use in calibration mode; with last reading reminder. Manganese, in high concentrations, can
Specifications Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing produce corrosion and scaling in pipes, which
is a serious industrial concern.
Dimensions 192 x 104 x 69 mm (7.6 x 4.1 x 2.7”)
HI96742 are supplied with sample cuvettes with caps (2), 9V battery, instrument quality
Ordering
certificate and instruction manual.
Information CAL Check standards and testing reagents sold separately
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
see page 10.42 for general accessories www.hannainst.com | 10.87
HI96745
10 Total Chlorine,
Hardness, Iron Low
Range and pH
Portable
Photometer
• CAL Check™
·· Allows for performance verification
and calibration of the meter using
NIST traceable standards
Photometers
• Auto-shut off
• Built-in timer
·· Display of time remaining before
a measurement is taken
Significance of Use
Chlorine and pH are two of the most closely
monitored parameters in water quality tests.
Hardness is also an important parameter,
attentively regulated to reduce waste or
ensure proper functioning of equipment.
HI96745 Chlorine, Total Hardness,
Iron can cause an unpleasant taste or stain
Specifications Iron Low Range and pH
kitchenware or laundry.
Chlorine, Free (P2);
pH (P1)
Chlorine, Total (P3)
Parameter Accuracy @
±0.1 pH ±0.03 mg/L ±3% of reading
Specifications 25°C (77°F)
Reagents and Standards Total Hardness (P4) Iron, Low Range (P5)
CAL Check standard cuvettes Range 0.00 to 4.70 mg/L (ppm) 0 to 1.60 mg/L (ppm)
HI96701-11
(free Cl)
Resolution 0.01 mg/L 0.01 mg/L
HI93701-01 reagents for 100 tests (free Cl)
Accuracy @
HI93701-03 reagents for 300 tests (free Cl) ±0.11 mg/L ±5% of reading ±0.01 mg/L ±8% of reading
25°C (77°F)
CAL Check standard cuvettes
HI96710-11 Light Source tungsten lamp
(pH)
Light Detector silicon photocell with narrow band interference filter @ 525 nm
HI93710-01 reagents for 100 tests (pH)
Power Supply 9V battery
HI93710-03 reagents for 300 tests (pH)
after ten minutes of non-use in measurement mode; after one hour
CAL Check standard cuvettes Auto-off
HI96711-11 of non-use in calibration mode; with last reading reminder
(total Cl)
HI93711-01 reagents for 100 tests (total Cl) Additional Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing
Specifications Dimensions 192 x 104 x 69 mm (7.6 x 4.1 x 2.7”)
HI93711-03 reagents for 300 tests (total Cl)
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
10.88 | www.hannainst.com see page 10.42 for general accessories
HI96752
Calcium and 10
Magnesium Portable
Photometer
• CAL Check™
·· Allows for performance verification
and calibration of the meter using
NIST traceable standards
• Auto-shut off
• Built-in timer
·· Display of time remaining before
Photometers
a measurement is taken
portable
stems. Magnesium is an indispensable mineral
Light Source light emitting diode
that helps in the production of chlorophyll,
Light Detector silicon photocell with narrow band interference filter @ 466 nm
the light-absorbing green pigment that
Power Supply 9V battery serves as an energy source for plants. It also
after ten minutes of non-use in measurement mode; after one hour increases vitamin concentrations and aids in
Auto-off
Additional of non-use in calibration mode; with last reading reminder uptake of phosphorus within the plant body.
Specifications Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing
HI96752 is supplied with sample cuvettes with caps (2), 9V battery, instrument quality
Ordering
certificate and instruction manual.
Information CAL Check standards and testing reagents sold separately
See page 10.90 for standard reagents; see page 10.91 for CAL Check kits;
see page 10.42 for general accessories www.hannainst.com | 10.89
10 Standard Reagents
Test Reagent Kit No. of Tests Test Reagent Kit No. of Tests
HI93755-01 100 Hardness (Magnesium) HI93719-01 100
Alkalinity
HI93755-03 300 and Total Hardness HI93719-03 300
HI93718-01 100
HI93700-01 100 Iodine
Ammonia LR HI93718-03 300
HI93700-03 300
HI93721-01 100
HI93716-01 100 Iron HR
Bromine HI93721-03 300
HI93716-03 300
HI93746-01 50
HI937521-01 50 Iron LR
Calcium HI93746-03 150
HI937521-03 150
HI93709-01 100
HI93752-01 100 (50 each) Manganese HR
Calcium and Magnesium HI93709-03 300
HI93752-03 300 (150 each)
HI93748-01 50
HI93753-01 100 Manganese LR
Chloride HI93748-03 150
HI93753-03 300
HI937520-01 50
HI93738-01 100 Magnesium
Chlorine Dioxide HI937520-03 150
HI93738-03 300
HI93730-01 100
HI95771-01 100 Molybdenum
Chlorine UHR HI93730-03 300
HI95771-03 300
HI93726-01 100
HI93701-01 100 Nickel HR
HI93726-03 300
Chlorine, Free HI93701-03 300
HI93701-F (liquid) 300 HI93740-01 50
Nickel LR
HI93740-03 150
Chlorine, Free HI93734-01 100
and Total HR HI93734-03 300 HI93728-01 100
Nitrate
HI93728-03 300
HI95762-01 100
accessories and reagents
10.90 | www.hannainst.com
CAL Check™ Kits 10
Photometers
HI96718-11 Iodine
HI96705 HI96705-11 Silica
HI96746-11 Iron
HI96706 HI96706-11 Phosphorus HI96710-11 pH
HI96707 HI96707-11 Nitrite
HI96708 HI96708-11 Nitrite HI96710-11 pH
HI96709 HI96709-11 Manganese HI96701-11 Free Chlorine
HI96104
HI96711-11 Total Chlorine
HI96712 HI96712-11 Aluminum
HI96722-11 Cyanuric Acid
HI96713 HI96713-11 Phosphate
HI96714 HI96714-11 Cyanide
HI96701-11 Free Chlorine
HI96715 HI96715-11 Ammonia
HI96710 HI96711-11 Total Chlorine
HI96716 HI96716-11 Bromine HI96710-11 pH
HI96717 HI96717-11 Phosphate
HI96718 HI96718-11 Iodine
HI96701-11 Free Chlorine
HI96719 HI96719-11 Hardness, Magnesium HI96711
HI96711-11 Total Chlorine
HI96720 HI96720-11 Hardness, Calcium
HI96721 HI96721-11 Iron
HI96701-11 Free Chlorine
HI96722 HI96722-11 Cyanuric Acid HI96711-11 Total Chlorine
HI96725
HI96722-11 Cyanuric Acid
reagents
HI96723 HI96723-11 Chromium VI
HI96710-11 pH
HI96724 HI96724-11 Free/Total Chlorine
www.hannainst.com | 10.91
HI83746
• Zero key
·· A simple press of the zero key on the
face of the meter will account for
the color and imperfections in the oil
sample before reagent addition.
• GLP
·· Review of the last calibration date.
• Auto shut-off
·· Automatic shut-off after 15 minutes
of non-use when the meter is in
measurement mode. Prevents
wastage of batteries in the event
the meter is accidentally left on.
• Battery status indicator
·· Indicates the amount of
battery life left.
• Error messages
·· Messages on display alerting to
problems including no cap, high
zero, and standard too low.
wine applications
• Units of measure
·· Appropriate unit of measure is
displayed along with reading.
10.92 | www.hannainst.com
Significance of Use
Sugar is an essential component in the
production of wine. During alcoholic
10
fermentation, yeast consume sugars found
in the grape juice, or must, and converts
it to ethyl alcohol and carbon dioxide. In
the case of certain styles of wine such as
semi-sweet or dessert wines, some sugar is
allowed to remain post-fermentation. This
residual sugar can serve to provide a sweeter
character to the final blend or play a role in
microbial stability.
Photometers
simple sugars are also known as reducing
sugars because they contain functional
groups capable of being oxidized under
certain conditions. After reaction with excess
alkaline cupric tartrate (Fehling reagents), the
content of reducing sugars can be determined
colorimetrically. The Fehling method is not
an exact determination but an index of the
reducing sugar concentration, because the
reaction depends upon the amount and type
of reducing sugars present. When the reducing
sugar content is known at the beginning of
fermentation, the potential alcohol degree
can be estimated by multiplying the sugar
concentration (in g/L) by 0.06.
wine applications
Specifications HI83746
Range 0.00 to 50.00 g/L (ppt)
www.hannainst.com | 10.93
HI83748
10.94 | www.hannainst.com
Significance of Use
Tartaric acid and tartrate play an important
role in the stability of wines. They can be
10
present in wine and juice in various forms,
like tartaric acid (H2T), potassium bitartrate
(KHT) or calcium tartrate (CaT). The ratio
of these depends mainly on the pH of the
wine. The percentage of tartrate present as
bitartrate (HT-) is maximum at pH 3.7.
Photometers
precipitation. For example, by adjusting the
pH of the wine, winemakers can significantly
influence the potential of casse formation.
wine applications
Specifications HI83748
Range 0.0 to 5.0 g/L (ppt)
Light Detector silicon photocell with narrow band interference filter @ 525 nm
Reagent Sets HI83748-20 tartaric acid reagents set for wine (20 tests)
www.hannainst.com | 10.95
HI83730
10 Photometer for
the Determination
of Peroxide Value
in Olive Oils
• Built-in timer
·· Display of time remaining before
a measurement is taken. Ensures
that all readings are taken at the
appropriate reaction intervals
for the test being performed.
Photometers
• Zero key
·· A simple press of the zero key on the
face of the meter will account for
the color and imperfections in the oil
sample before reagent addition.
• GLP
·· Review of the last calibration date.
• Auto shut-off
·· Automatic shut-off after 15 minutes
of non-use when the meter is in
measurement mode. Prevents
wastage of batteries in the event
the meter is accidentally left on.
• Battery status indicator
·· Indicates the amount of
battery life left.
• Error messages
·· Messages on display alerting to
problems including no cap, high
zero, and standard too low.
wine applications
• Units of measure
·· Appropriate unit of measure is
displayed along with reading.
10.96 | www.hannainst.com
Significance of Use
Over time, edible oils may degrade and spoil.
The primary cause of edible oil degradation is
10
oxidation; as oil oxidation occurs, flavors and
odors can change, resulting in a product that
is undesirable to consumers. The unsaturated
fatty acids found in oils react with oxygen,
creating peroxide as an unwanted byproduct.
This oxidation reaction is more likely to
occur under certain conditions, including
exposure to light, the presence of metal
ions, the introduction of oxygen, or when
storage temperatures are not maintained. In
order to determine oil quality and the onset
of oxidation, peroxide value is determined.
Photometers
Peroxide value is defined as the amount of
peroxide oxygen per kilogram of oil, which is
reported in units of milliequivalents or meq. A
lower peroxide value indicates higher quality
edible oil.
wine applications
Specifications HI83730
Range 0.0 to 25.0 meq O₂/kg
Light Detector silicon photocell with narrow band interference filter @ 466 nm
HI83730-01 (115V) and HI83730-02 (230V) are supplied with reagents for
Ordering
10 tests, 1 mL syringes (4), scissors, vial wiping cloth, batteries, AC adapter,
Information instructions and a rigid carrying case.
HI83730-20
Reagent Sets HI83730-20 peroxide in olive oil reagents kit (21 manual tests)
www.hannainst.com | 10.97
10
The Hanna Checker HC bridges the gap between simple chemical test
kits and professional instrumentation. Chemical test kits are not very
Photometers
The contoured style of the Checker HC fits in your palm and pocket
perfectly, while the large LCD is easy to read. The auto shut-off feature
assures the battery life will not be drained if you forget to turn it off.
Our optional Checker HC Calibration Sets provide a simple solution Light Detector silicon photocell
to validating your Checker HC. Each high quality set of standards is Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing
manufactured in our state-of-the-art facility and comes supplied with Battery Type (1) 1.5V AAA
a Certificate of Analysis. The Certificate of Analysis provides the lot Dimensions 86 x 59.8 x 36.6 mm (3.4 x 2.4 x 1.5”)
number, reference values and expiration date to provide traceability
Weight 64 g (2.25 oz.)
when certifying the Checker HC.
10.98 | www.hannainst.com
HI755 · HI775 · HI772
Photometers
Alkalinity is one of the most important
parameters to measure in aquariums. It
helps to maintain a stable pH, an important
factor for most aquatic life. In seawater,
bicarbonate is the largest contributor to
alkalinity and is a critical element needed for
healthy corals. Corals need bicarbonate and
carbonate available to form their skeletons.
Without an adequate level, healthy coral
growth is not possible. Since bicarbonate
levels can be difficult to determine, total
alkalinity is measured instead. The alkalinity
of natural seawater is typically 125 ppm
CaCO3 (equivalent to 7 degrees of carbonate
hardness, or dKH). In saltwater aquariums,
typical alkalinity values can range from 125 to
200 ppm CaCO3 (7 to 11.2 dKH).
The HI755, HI775 and HI772 Checker®HC’s Specifications HI755 (Seawater) HI775 (Fresh water) HI772 (Seawater)
are simple, accurate, and cost effective Range 0 to 300 ppm CaCO₃ 0 to 500 ppm CaCO₃ 0.0 to 20.0 dKH
ways to measure alkalinity in seawater and Resolution 1 ppm 1 ppm 0.1 dKH
fresh water. Designed as a more accurate
Accuracy
Checker®HC
alternative to chemical test kits, these ±5 ppm ±5% of reading ±0.3 dKH ±5% of reading
@ 25°C/77°F
handheld colorimeters provide quick, accurate
Light Source LED @ 610 nm
alkalinity testing results in four easy steps.
Light Detector silicon photocell
Step One - Add a sample to Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing
the included cuvette(s). Battery Type (1) 1.5V AAA
Step Three - Remove sample and add Dimensions 86.0 x 61.0 x 37.5 mm (3.4 x 2.4 x 1.5”)
Reagent Set HI755-26 (25 tests) HI775-26 (25 tests) HI772-26 (25 tests)
See page 10.120 for Checker HC reagents, calibration sets and accessories www.hannainst.com | 10.99
HI700 · HI715 · HI733
10 Ammonia Low,
Medium and High
Range
Handheld Colorimeters
·· Water quality
·· Aquariums
·· Environmental
Range 0.00 to 3.00 ppm NH3-N 0.00 to 9.99 ppm NH3-N 0.0 to 99.9 ppm as NH+
₄
Step Four – Reinsert sample, press and
hold the button for 3 seconds to start Resolution 0.01 ppm 0.01 ppm 0.1 ppm
reaction timer. reading will be taken Accuracy ±0.05 ppm ±5% ±0.05 ppm ±5% ±1.0 ppm ±5%
automatically and the results displayed. @ 25°C/77°F of reading of reading of reading
causes a yellow tint in the sample. Dimensions 86.0 x 61.0 x 37.5 mm (3.4 x 2.4 x 1.5”)
HI700 Checker®HC is supplied with sample cuvettes with caps (2), ammonia LR reagent
starter kit (reagents for 25 tests), battery, instructions and quick start guide.
HI715 Checker®HC is supplied with sample cuvettes with caps (2), ammonia MR reagent
Ordering
starter kit (reagents for 25 tests), battery, instructions and quick start guide.
Information
HI733 Checker®HC is supplied with sample cuvettes with caps (2), ammonia HR reagent
starter kit (reagents for 10 tests), syringe with tip, plastic pipette, battery, instructions
and quick start guide.
Reagent Set HI700-25 (25 tests) HI715-26 (25 tests) HI733-25 (20 tests)
10.100 | www.hannainst.com See page 10.120 for Checker HC reagents, calibration sets and accessories
HI716
Bromine 10
Handheld Colorimeter
Photometers
·· Uses 10 mL glass cuvettes
• Small size, big convenience
·· Weighing a mere 64 g (2.25 oz.),
the Checker®HC easily fits into
the palm of your hand or pocket
·· Built- in reaction timer
·· Operated by a single AAA battery
• Ideal for
·· Water quality
·· Education
·· Swimming pools/hot tub sanitization
·· Environmental
Checker®HC
Step Two - Insert sample into the
Checker HC and press button to zero.
Light Detector silicon photocell The HI716 uses an adaptation of the Standard
Methods for the Examination of Water and
Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing
Wastewater, 18th edition, DPD method. The
Battery Type (1) 1.5V AAA
reaction between bromine and the reagent
Auto-off after ten minutes of non-use causes a pink tint in the sample.
Dimensions 86.0 x 61.0 x 37.5 mm (3.4 x 2.4 x 1.5”)
adaptation of the Standard Methods for the Examination of Water and Wastewater,
Method 18th edition, DPD method. The reaction between bromine and the reagent causes
a pink tint in the sample
Ordering HI716 Checker®HC is supplied with sample cuvettes with caps (2), bromine reagent
Information starter kit (reagents for 6 tests), battery, instructions and quick start guide.
See page 10.120 for Checker HC reagents, calibration sets and accessories www.hannainst.com | 10.101
HI758
10 Marine Calcium
Handheld Colorimeter
of water hardness which can cause pipe or HI758 includes HI731339 100µL
tube scaling. pipette and 1 mL syringe
and press the button to read the calcium Accuracy @ 25°C/77°F ±6% of reading
concentration in ppm on the display. Light Source LED @ 610 nm
10.102 | www.hannainst.com See page 10.120 for Checker HC reagents, calibration sets and accessories
HI753
Chloride 10
Handheld Colorimeter
Photometers
The HI753 Checker®HC is a simple, accurate,
and cost effective way to measure chloride.
Designed as a more accurate alternative to
chemical test kits, the HI753 provides quick,
accurate results in three easy steps.
Checker®HC
Specifications HI753
Range 0.0 to 20.0 ppm
Accuracy
± 0.5 ppm ± 6% of reading
@ 25°C/77°F
HI753 Checker®HC is supplied with sample cuvettes with caps (2), chloride reagent
Ordering
starter kit (reagents for 25 tests), syringes with tips (2), battery, instructions and quick
Information start guide.
See page 10.120 for Checker HC reagents, calibration sets and accessories www.hannainst.com | 10.103
HI701 · HI762
affordable.
10.104 | www.hannainst.com See page 10.120 for Checker HC reagents, calibration sets and accessories
HI711 · HI761 · HI771
Photometers
• Small size, big convenience
• Ideal for:
·· Swimming pools and spas
·· Fruit and vegetable
sanitation/disinfection
·· Drinking water
·· Quality control checks
·· Environmental
·· Hospitality
·· Food processing
Checker®HC
Resolution 0.01 ppm 1 ppb 1 ppm kits are not very accurate and only give 5
Accuracy ±0.03 ppm ±3% ±5 ppb ±5% ±3 ppm ±5% to 10 points resolution, while professional
@ 25°C/77°F of reading of reading of reading instrumentation can cost hundreds of dollars
Light Source LED @ 525 nm and can be time consuming to calibrate
and maintain. Hanna’s Checker HC’s are an
Light Detector silicon photocell
accurate and affordable alternative.
Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing
Battery Type (1) 1.5V AAA The contoured style of these Checkers fit
after three minutes easily in the palm of your hand or pocket and
Auto-off of non-use and two minutes after ten minutes of non-use the large LCD is easy to read. The auto shut-
after reading off feature assures the battery life will not be
Dimensions 86.0 x 61.0 x 37.5 mm (3.4 x 2.4 x 1.5”) drained if you forget to turn it off.
Weight 64 g (2.3 oz)
These Checker HC's are designed to be
adaptation of the
portable and easy to use, providing quick,
Standard Methods for
Method adaptation of USEPA method 330.5, DPD method
Water and Wastewater,
accurate results in four easy steps.
20th Edition 4500-Cl
HI711 Checker®HC is supplied with sample cuvettes with caps (2), total chlorine reagent
starter kit (reagents for 6 tests), battery, instructions and quick start guide.
Ordering HI761 Checker®HC is supplied with sample cuvettes with caps (2), total chlorine ULR
Information reagent starter kit (reagents for 6 tests), battery, instructions and quick start guide.
HI771 Checker®HC is supplied with sample cuvettes with caps (2), Chlorine UHR reagent
starter kit (reagents for 6 tests), battery, instructions and quick start guide.
Reagent Set HI711-25 (25 tests) HI761-25 (25 tests) HI771-25 (25 tests)
See page 10.120 for Checker HC reagents, calibration sets and accessories www.hannainst.com | 10.105
HI749 · HI723
10 Chromium VI
Low Range and
High Range
Handheld Colorimeters
·· Water quality
·· Environmental
·· Plating
·· Education
10.106 | www.hannainst.com See page 10.120 for Checker HC reagents, calibration sets and accessories
HI727
Color of Water 10
Handheld Colorimeter
Photometers
Apparent color is caused by both dissolved
and suspended solids. Color is measured
in Platinum-Cobalt units (PCU). The AWWA
recommends ≤ 15 PCU.
Checker®HC
procedures may also remove some true
color. Centrifugation avoids interaction of
color with filter materials, but results vary
with the sample nature, size, and speed of
the centrifuge. When sample dilution is
Specifications HI727 necessary, whether it precedes or follows
Range 0 to 500 PCU turbidity removal, it can alter the measured
Resolution 5 PCU
color. Acceptable pretreatment procedures
are included with each method. The
Accuracy
±10 PCU ±5% of reading pretreatment method should be stated when
@ 25°C/77°F
reporting the results.
Light Source LED @ 470 nm
Light Detector silicon photocell The HI727 Checker®HC is very simple to use.
Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing First, zero the instrument with deionized
water. Next, prepare the sample according
Battery Type (1) 1.5V AAA
to the Apparent/True color measurement.
Auto-off after ten minutes of non-use
Place the second vial with prepared sample
Dimensions 86.0 x 61.0 x 37.5 mm (3.4 x 2.4 x 1.5”) into the Checker HC, press the operational
Weight 64 g (2.3 oz) button and the HI727 Checker® displays
adaptation of the Standard Methods for the Examination of Water and the color of water in PCU.
Method
Wastewater, 21st edition, Colorimetric Platinum Cobalt method
Ordering HI727 Checker®HC is supplied with sample cuvettes with caps (2), battery,
Information instructions and quick start guide.
See page 10.120 for Checker HC reagents, calibration sets and accessories www.hannainst.com | 10.107
HI759
• Easy to use
• Results are displayed % transmittance
• Small size, big convenience
the large, easy to read LCD display. Located HI759 Checker®HC is supplied with sample cuvettes with caps (3),
Ordering
on the back of the meter is a chart referencing glycerol standard cuvette, plastic beakers (3), battery, instructions
Information and quick reference guide.
the percent light transmittance to the grade.
Eliminating the subjectivity of grading by eye HI759-11 glycerol reference cuvettes (2 pcs)
Accessories
and the potential for mislabeling, the HI759 is HI731359 round glass cuvettes with plastic inserts (25)
grading made simple.
10.108 | www.hannainst.com See page 10.120 for Checker HC reagents, calibration sets and accessories
HI747 · HI702
Photometers
·· Aquarium
·· Wastewater
·· Environmental
Checker®HC
The HI702 and HI747 uses an adaptation
of the EPA method. The reaction between
Specifications HI747 (LR) HI702 (HR)
copper and the bicinchoninate reagent
Range 0 to 999 ppb 0.00 to 5.00 ppm
causes a purple tint in the sample.
Resolution 1 ppb 0.01 ppm
Accuracy
± 10 ppb ± 5% of reading ± 0.05 ppm ±5% of reading
@ 25°C/77°F
adaptation of the EPA method. The reaction between copper and the bicinchoninate
Method
reagent causes a purple tint in the sample
HI747 Checker®HC is supplied with sample cuvettes with caps (2), copper LR reagent
Ordering starter kit (reagents for 6 tests), battery, instructions and quick start guide.
Information HI702 Checker®HC is supplied with sample cuvettes with caps (2), copper HR reagent
starter kit (reagents for 6 tests), battery, instructions and quick start guide.
See page 10.120 for Checker HC reagents, calibration sets and accessories www.hannainst.com | 10.109
HI729 · HI739
Accuracy*
±0.10 ppm ±5% of reading ±0.5 ppm ± 5% of reading
@ 25°C/77°F
adaptation of the Standard Methods for the Examination of Water and Wastewater,
Method
18th edition, SPADNS method
HI729 Checker®HC is supplied with sample cuvettes with caps (2), fluoride LR
reagent starter kit (reagents for 5 tests), syringe with tip, battery, instructions and
Ordering quick start guide.
Information HI739 Checker®HC is supplied with sample cuvettes with caps (2), fluoride HR
reagent starter kit (reagents for 15 tests), syringe with tip, plastic pipette, battery,
instructions and quick start guide.
10.110 | www.hannainst.com See page 10.120 for Checker HC reagents, calibration sets and accessories
HI719 · HI720
Magnesium and 10
Calcium Hardness
Handheld Colorimeters
Photometers
·· Drinking water
·· Wastewater
Checker®HC
Resolution 0.01 ppm 0.01 ppm
Accuracy
± 0.20 ppm ± 5% of reading ± 0.20 ppm ± 5% of reading
@ 25°C/77°F
adaptation of the Standard Methods for adaptation of the Standard Methods for
the Examination of Water and Wastewater, the Examination of Water and Wastewater,
Method 18th edition, EDTA colorimetric method. The 18th edition, Calmagite method. The
reaction between magnesium and reagents reaction between calcium and reagents
causes a reddish-violet tint in the sample causes a reddish-violet tint in the sample
HI719 Checker®HC is supplied with sample cuvettes with caps (2), magnesium hardness
reagent starter kit (reagents for 25 tests), syringes with tips (2), plastic beaker, battery,
Ordering instructions and quick start guide.
Information HI720 Checker®HC is supplied with sample cuvettes with caps (2), calcium hardness
reagent starter kit (reagents for 25 tests), syringes with tips (2), plastic beaker, battery,
instructions and quick start guide.
See page 10.120 for Checker HC reagents, calibration sets and accessories www.hannainst.com | 10.111
HI718
10 Iodine
Handheld Colorimeter
The contoured style of this Checker HC fits in Light Detector silicon photocell
your palm and pocket perfectly and the large Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing
LCD is easy to read. The auto shut-off feature Battery Type (1) 1.5V AAA
assures the battery life will not be drained if Auto-off after ten minutes of non-use
you forget to turn it off.
Dimensions 86.0 x 61.0 x 37.5 mm (3.4 x 2.4 x 1.5”)
adaptation of the Standard Methods for the Examination of Water and Wastewater,
Method
18th edition, DPD method
Ordering HI718 Checker®HC is supplied with sample cuvettes with caps (2), iodine reagent
Information starter kit (reagents for 6 tests), battery, instructions and quick start guide.
10.112 | www.hannainst.com See page 10.120 for Checker HC reagents, calibration sets and accessories
HI746 · HI721
Photometers
·· Agricultural irrigation water
Checker®HC
while the HI746 features 1 ppb resolution and
Specifications HI746 (LR) HI721 (HR) ±20 ppb ±5% of reading accuracy.
Range 0 to 999 ppb 0.00 to 5.00 ppm
The contoured style of these meters fit in
Resolution 1 ppb 0.01 ppm
your palm and pocket perfectly and the large
Accuracy LCD is easy to read. The auto shut-off feature
±20 ppb ±5% of reading ±0.04 ppm ±2% of reading
@ 25°C/77°F
assures battery life will not be drained if you
Light Source LED @ 575 nm LED @ 525 nm forget to turn it off.
Light Detector silicon photocell
HI746 Checker®HC is supplied with sample cuvettes with caps (2), iron LR reagent
starter kit (reagents for 25 tests), 25 mL glass cylinders with rubber cap (2), battery,
Ordering instructions and quick start guide.
Information
HI721 Checker®HC is supplied with sample cuvettes with caps (2), iron HR reagent
starter kit (reagents for 6 tests), battery, instructions and quick start guide.
See page 10.120 for Checker HC reagents, calibration sets and accessories www.hannainst.com | 10.113
HI709
10 Manganese
High Range
Handheld Colorimeter
·· Aquarium
·· Wastewater
·· Environmental
adaptation of the Standard Methods for the Examination of Water and Wastewater,
Method 18th edition, Periodate method. The reaction between manganese and reagents
causes a pink tint in the sample
Ordering HI709 Checker®HC is supplied with sample cuvettes with caps (2), manganese HR
Information reagent starter kit (reagents for 6 tests), battery, instructions and quick start guide.
10.114 | www.hannainst.com See page 10.120 for Checker HC reagents, calibration sets and accessories
HI726
Photometers
Nickel is extensively used in electroplating,
the manufacturing of steel, electronic
devices, ceramics and colored glasses. It
plays a vital role in many processes of applied
sciences and fundamental sciences.
Checker®HC
determined that some nickel compounds are
carcinogenic to humans and that metallic
nickel may possibly be carcinogenic to
humans. The EPA has determined that
nickel refinery dust and nickel subsulfide are
human carcinogens.
Specifications HI726 (HR)
Range 0.00 to 7.00 g/L The HI726 Checker®HC is extremely simple
Resolution 0.01 g/L to use. First, zero the instrument with your
water sample. Next, add the reagent, shake
Accuracy
@ 25°C/77°F
±0.10 g/L ±5% of reading gently until complete dissolution. Last, place
the vial into the Checker HC, press the button
Light Source LED @ 575 nm
for 3 seconds. The display will show the
Light Detector silicon photocell
countdown prior to the measurement. When
Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing the timer ends the meter will perform the
Battery Type (1) 1.5V AAA reading and display concentration in g/L of
Auto-off after ten minutes of non-use nickel. It’s that easy.
Ordering HI726 Checker®HC is supplied with sample cuvettes with caps (2), nickel HR reagent
Information starter kit (reagents for 6 tests), battery, instructions and quick start guide.
See page 10.120 for Checker HC reagents, calibration sets and accessories www.hannainst.com | 10.115
HI764 · HI707 · HI708
fits in your palm and pocket perfectly and HI764 Checker®HC is supplied with sample cuvettes with caps (2), marine nitrite ULR
the large LCD is easy to read. The auto shut- reagent starter kit (reagents for 6 tests), battery, instructions and quick start guide.
off feature assures the battery life will not be Ordering HI707 Checker®HC is supplied with sample cuvettes with caps (2), nitrite LR reagent
drained if you forget to turn it off. Information starter kit (reagents for 6 tests), battery, instructions and quick start guide.
HI708 Checker®HC is supplied with sample cuvettes with caps (2), nitrite HR reagent
starter kit (reagents for 6 tests), battery, instructions and quick start guide.
Reagent Set HI764-25 (25 tests) HI707-25 (25 tests) HI708-25 (25 tests)
10.116 | www.hannainst.com See page 10.120 for Checker HC reagents, calibration sets and accessories
HI713 · HI717
Phosphate 10
Handheld Colorimeters
Photometers
Orthophosphates are found in natural waters
and wastewaters. They are commonly added
to drinking water as a corrosion inhibitor. The
instantaneous analysis of orthophosphates
by colorimetric determination provides rapid
results using a standard analysis technique.
Checker®HC
Specifications HI713 (LR) HI717 (HR)
The HI717 Checker HC portable handheld
Range 0.00 to 2.50 ppm 0.0 to 30.0 ppm
colorimeter features a resolution of 0.1 ppm
Resolution 0.01 ppm 0.1 ppm and ±1.0 ppm ±5% of reading accuracy.
Accuracy The HI717 Checker HC uses an adaptation
±0.04 ppm ±4% of reading ±1.0 ppm ±5% of reading
@ 25°C/77°F of the Standard Methods for the Examination
Light Source LED @ 525 nm of Water and Wastewater, 18th edition,
Light Detector silicon photocell
Amino Acid method.
HI713 Checker®HC is supplied with sample cuvettes with caps (2), phosphate LR
Ordering reagent starter kit (reagents for 6 tests), battery, instructions and quick start guide.
Information HI717 Checker®HC is supplied with sample cuvettes with caps (2), phosphate HR
reagent starter kit (reagents for 20 tests), battery, instructions and quick start guide.
See page 10.120 for Checker HC reagents, calibration sets and accessories www.hannainst.com | 10.117
HI736 · HI706
10 Phosphorus
Handheld Colorimeters
HI736 Checker®HC is supplied with sample cuvettes with caps (2), marine
phosphorus ULR reagent starter kit (reagents for 6 tests), battery, instructions
ORDERING and quick start guide.
INFORMATION HI706 Checker®HC is supplied with sample cuvettes with caps (2),
phosphorus HR reagent starter kit (reagents for 20 tests), battery, instructions
and quick start guide.
10.118 | www.hannainst.com See page 10.120 for Checker HC reagents, calibration sets and accessories
HI770 · HI705
Photometers
Silica is the name given to silicon dioxide, SiO2.
Silicon (Si), is the most abundant element
in the Earth’s crust, 28% of it by weight.
Silicon is never found free form in nature.
In crystallized form it is only reactive under
conditions of extremely high temperatures.
Water and water vapor have little influence
upon silicon solubility, because a protective
surface layer of silicon dioxide is rapidly
formed. Silicon binds with other elements to
form various species of silica and silicate. The
concentration of the soluble silica molecules
are important to aquaculture because they
influence (and limit) the growth of diatoms.
In most waters, the predominant form of
dissolved silica is monosilicic acid, which
incorporates two water molecules.
Checker®HC
SPECIFICATIONS HI770 (HR) HI705 (LR) The contoured style of these Checkers HC fit
easily in the palm of your hand or pocket and
Range 0 to 200 ppm 0.00 to 2.00 ppm
the large LCD is easy to read. The auto shut-
Resolution 1 ppm 0.01 ppm
off feature assures the battery life will not
Accuracy @ 25°C/77°F ±2 ppm ±5% of reading ±0.03 ppm ±5% of reading be drained if you forget to turn it off.
Light Source LED @ 470 nm LED @ 610 nm
HI770 Checker®HC is supplied with sample cuvettes with caps (2), silica HR reagent
ORDERING starter kit (reagents for 6 tests), battery, instructions and quick start guide.
INFORMATION HI705 Checker®HC is supplied with sample cuvettes with caps (2), silica LR reagent
starter kit (reagents for 12 tests), battery, instructions and quick start guide.
See page 10.120 for Checker HC reagents, calibration sets and accessories www.hannainst.com | 10.119
10 Checker®HC Reagents and Calibration Check Sets
Meter Code Parameter Chemical Method Reagent Code Calibration Checking Set # of Tests
HI700 Ammonia LR Nessler* HI700-25 HI700-11 25
HI701 Chlorine, Free DPD* HI701-25 HI701-11 25
HI702 Copper HR Bicinchoninate* HI702-25 HI702-11 25
HI705 Silica LR Heteropoly Blue* HI705-25 HI705-11 25
HI706 Phosphorus HR Amino Acid* HI706-25 HI706-11 40
HI707 Nitrite LR Diazotization* HI707-25 HI707-11 25
HI708 Nitrite HR Ferrous Sulfate* HI708-25 HI708-11 25
HI709 Manganese HR Periodate* HI709-25 HI709-11 25
Photometers
Checker HC Accessories
Tips for an accurate measurement
Code Description
It is important that the sample does not contain any debris.
HI731318 cuvette cleaning cloth (4)
HI731315 glass cuvettes and caps (2) Whenever the cuvette is placed into the
measurement cell, it must be dry outside and
HI731321 glass cuvettes (4) completely free of fingerprints, oil or dirt. Wipe it
HI731225 cuvette cap for Checker®HC (4) thoroughly with HI731318 or a lint-free cloth prior
to insertion.
HI93703-50 cuvette cleaning solution
10.120 | www.hannainst.com
Table of Contents 11
table of contents
Product Spotlights���������������������������������������������11.3
Benchtop������������������������������11.4
COD with Bar Code Recognition����������������� 11.4
COD with up to 73 methods������������������������� 11.6
COD for Wastewater Analysis ������������������ 11.12
Accessories ������������������������������������������������������� 11.14
Certified Reagents����������11.15
www.hannainst.com | 11.1
11 Chemical Oxygen Demand
Introduction
Chemical Oxygen Demand
The Hanna COD method is based on the well established closed Effective monitoring and control of parameters such as ammonia,
dichromate-reflux colorimetric method. The colorimetric measurement nitrate, total nitrogen and total reactive phosphorus allow plant
of COD is faster and easier to perform than the titrimetric analysis; managers to profile and improve the health of aquatic ecosystems.
additional reagents are not required. The sample is added to the By accurately monitoring levels of each specific pollutant,
reagent vial and digested under closed reflux conditions and allowed operational parameters can be adjusted to maintain high efficiency
to cool before measurement is taken. Reference standards can be of biodegradation treatments while also minimizing costs.
made using potassium hydrogen phthalate (KHP), 1 mg of KHP is equal
to 1.175 mg COD. Nitrogen
When a treatment plant uses processes like nitrification and
The US Environmental Protection Agency (EPA) specifies that the
denitrification, it is important to monitor and maintain the equilibrium
introduction
Phosphorus
COD Influent COD Effluent COD Removal
Phosphorus is measured during both biological and chemical
1214 451 62%
dephosphorization. An excessive amount of phosphate discharged
948 328 63%
in superficial waters or in bio-treatment tanks causes an increase
1341 307 77% of algae and system eutrophication.
11.2 | www.hannainst.com
Product Spotlights 11
HI83224
HI83399
product spotlights
included for industrial and municipal wastewater treatment. The
Phosphorous and Nitrogen parameters included are beneficial to
municipal wastewater treatment customers that need to monitor
their biological and chemical nutrient removal process.
HI83314
www.hannainst.com | 11.3
HI83224
• On-screen Tutorial
advanced meter scans each vial inserted into absorbance readings minimizes
·· With the tutorial function enabled,
the vial holder and automatically identifies errors due to vial inconsistencies.
short guides relating to the current
the sample method and range. The barcode
• Method Verification operation are displayed.
has four digits: the first two digits are for
parameter identification and the second two ·· A dedicated METHOD CHECK button • Built-in Timer
digits are for reagent lot ID. Vials for different is available to verify the vial barcode, ·· Display of time remaining before
methods can be distinguished by a barcode eliminating the potential for vial a measurement is taken. Ensures
printed on the vial and the cap color - the confusion or incorrect sample readings. that all readings are taken at the
barcodes for different methods are shown appropriate reaction intervals
in the table below. For parameters that don’t • Backlit Graphic LCD Display for the test being performed.
use a barcoded reagent, the vials supplied ·· The HI83224 features an adjustable
• Error Messages
with the instrument can be used. backlit graphic display with virtual
·· Messages on display alerting to
keys and on-screen help to provide problems including barcode error,
Vial Rotation for an intuitive user interface. wrong vial, and different reagent lot.
During the measurement phase of the analysis, • Data Logging • Cooling Lamp Indicator
the state-of-the-art vial rotator spins the vial ·· To maintain the desirable wavelength
·· Users can store up to 200 readings by
to identify the method via the barcode, then to be used for absorbance, it is
simply pressing the LOG key. Logged
rotates while taking a number of absorbance necessary to ensure components
readings. The instrument then converts the readings are just as easily recalled by
are not overheated from the heat
readings to concentration units and displays pressing the dedicated RCL button.
generated by the tungsten lamp.
the result on the easy to read screen. Stored data includes parameter, test Each photometer is designed
results, sample number, lot number, to allow a minimal amount of
instrument ID, date and time. time for components to cool.
11.4 | www.hannainst.com
Specifications HI83224
Light Source
Light Detector
tungsten lamps with narrow band interference filters
silicon photocell
11
Data Logging up to 200 samples
PC Connectivity USB
0 to 1500 mg/L (as O₂) 1 mg/L ±15 mg/L or ±4 % of reading** dichromate EPA‡ HI94754B-25 (25 tests)
COD MR – 150°C,
0 to 1500 mg/L 1 mg/L ±15 mg/L or ±4% of reading** dichromate mercury-free◊◊ HI94754E-25 (25 tests)
2 hours
0 to 1500 mg/L 1 mg/L ±15 mg/L or ±4% of reading** dichromate ISO◊ HI94754G-25 (25 tests)
COD HR – 150°C,
0 to 15000 mg/L (as O₂) 1 mg/L ±150 mg/L or ±3 % of reading** dichromate HI94754C-25 (25 tests)
2 hours
COD Rapid Method: It is now possible to get results for process control monitoring in a fraction of the time using any of the Hanna COD reagents. The
Rapid Method digestion time is reduced from 2 hours to 15 minutes when the digestion temperature is increased from 150°C to 170°C.
COD MR / Rapid 0 to 150 mg/L (as O₂) 1 mg/L ±20 mg/L or 4% of reading** adaptation of dichromate EPA HI94754B-25 (25 tests)
Method – 170°C, 0 to 1500 mg/L 1 mg/L ±20 mg/L or 4% of reading** adaptation of dichromate mercury-free HI94754E-25 (25 tests)
15 minutes 0 to 1500 mg/L 1 mg/L ±20 mg/L or 4% of reading** adaptation of dichromate ISO HI94754G-25 (25 tests)
benchtop
(as NH₃—N) ±5 % of reading**
±1 mg/L or
Ammonia HR 0 to 100 mg/L (as NH₃—N) 1 mg/L Nessler HI94764B-25 (25 tests)
±5 % of reading**
0.01 mg/L below 0.99 mg/L; ±0.03 mg/L HI93701-01 (100 tests)
Chlorine, Free** 0.00 to 5.00 mg/L DPD
0.1 mg/L above 0.99 mg/L or ±4 % of reading** HI93701-03 (300 tests)
0.01 mg/L below 0.99 mg/L; ±0.03 mg/L or HI93711-01 (100 tests)
Chlorine, Total** 0.00 to 5.00 mg/L DPD
0.1 mg/L above 0.99 mg/L ±4 % of reading** HI93711-03 (300 tests)
±1.0 mg/L or
Nitrate 0.0 to 30.0 mg/L (as NO₃—N) 0.1 mg/L chromotropic acid HI94766-50 (50 tests)
±5 % of reading** @20°C
±1.0 mg/L or
Nitrogen, Total LR 0.0 to 25.0 mg/L (as N) 0.1 mg/L chromotropic acid HI94767A-50 (50 tests)
±5 % of reading** @20°C
±3 mg/L or
Nitrogen, Total HR 10 to 150 mg/L (as N) 1 mg/L chromotropic acid HI94767B-50 (50 tests)
±4 % of reading**
±0.05 mg/L or
Phosphorus, Reactive 0.00 to 1.60 mg/L (as P) 0.01 mg/L ascorbic acid HI94758A-50 (50 tests)
±5 % of reading**
±0.05 mg/L or
Phosphorus, Total 0.00 to 1.15 mg/L (as P) 0.01 mg/L ascorbic acid HI94758C-50 (50 tests)
±6 % of reading**
Notes:
‡ Method with chromium-sulfuric acid is officially recognized by EPA for wastewater analysis. * @ 25°C (77°F) unless otherwise stated
◊ The HI94754F-25 and HI94754G-25 method follows the official method ISO 15705. ** Whichever is greater
◊◊This method is recommended for general purpose analysis with no chloride interference.
www.hannainst.com | 11.5
HI83399
11 Multiparameter
Photometer with
COD for Water and
Wastewater
with Digital pH Electrode Input
Chemical Oxygen Demand
11.6 | www.hannainst.com
11
benchtop
Adding a focusing lens to the optical path allows for the collection
The narrow band interference filter not only ensures greater of all of the light that exits the cuvette and focusing the light on
wavelength accuracy (±1 nm) but is also extremely efficient, allowing a the silicon photo detector. This innovative approach to photometric
brighter, stronger signal to be transmitted. The end result is increased measurements cancels the errors from imperfections and scratches
measurement stability and less wavelength error. present in the glass cuvette eliminating the need to index the cuvette.
• Better linearity than research-grade spectrophotometers • Improved optical filters — higher wavelength
accuracy and light throughput
www.hannainst.com | 11.7
11 Cuvette Adapter
The HI83399 is supplied with a 16 mm cuvette
adapter that accepts digestion vials.
Chemical Oxygen Demand
Connectivity
photometer measurements or 50 hours
1 pH Connectivity of continuous pH measurements. A power
3
Any of our digital pH electrodes can be supply can also be plugged into the micro USB
1 connected to the HI83300 family by a 3.5 port at the back of the meter.
2
mm input. Plugging in an electrode has never
been easier; there are no alignment issues 2 3 USB Connectivity
or broken pins. Simply connect the electrode
Both a USB and micro USB port are located
and start taking measurements.
on the HI83399. Each of these ports can
be used to transfer data via flash drive or
2 Dual Power Supply direct connection to a PC or MAC. Data is
The HI83399 is equipped with a rechargeable transferred as CSV files for easy processing
lithium ion battery that lasts up to 500 and widespread compatibility.
11.8 | www.hannainst.com
Photometer Capabilities
11
Data Management
benchtop
timer displays the time remaining until
a measurement will be taken, ensuring
consistent results between measurements Backlit Graphic LCD Display
and users.
A backlit, graphic LCD display provides an
Absorbance Measurement Mode
easy to read, user-friendly interface.
Users can select to calibrate and measure
samples in absorbance mode for each
wavelength used by the meter. This mode is
a convenient way for users to develop their
own calibration curves and measure samples
with customized chemistries.
pH Measurement
Data Management
The HI83300 family offers the ability to Capabilities Intuitive Display
connect a digital pH electrode. Users can
With virtual keys, a battery status indicator,
connect any sensor from our extensive line User ID and Sample ID and practical error messages, users will find
of digital pH electrodes. Whether a user An alphanumeric keypad can be used to enter the meter interface intuitive. On-screen
requires a glass or plastic body, a spheric or sample ID and user ID to be stored with the guides provide information relating to the
conic tip shape, or the ability for safe use with measurement reading. The recall key allows current meter operation, and can be used
food samples, our digital electrode offering is the user to review the data along with the at any stage in the setup or measurement
suitable for nearly everyone. date and time that the reading was taken. process to show contextual help.
www.hannainst.com | 11.9
11 Specifications
Measurement Channels 5 x optical channels; 1 x digital electrode channel (pH measurement)
Logging 1000 readings (mixed photometer and electrode); log on demand with user name and sample ID optional input
Connectivity USB-A host for flash drive; micro-USB-B for power and computer connectivity
Power Supply 5 VDC USB 2.0 power adapter with USB-A to micro-USB-B cable (included)
LED
with Narrow Band
Parameter Range Resolution Accuracy Interference Filter Method
Alkalinity 0 to 500 mg/L (as CaCO₃) 1 mg/L ±5 mg/L ±5% of reading at 25 °C @ 610 nm Bromocresol green
Alkalinity, Marine 0 to 300 mg/L (as CaCO₃) 1 mg/L ±5 mg/L ±5% of reading at 25 °C @ 610 nm Bromocresol green
Aluminum 0.00 to 1.00 mg/L (as Al₃+) 0.01 mg/L ±0.04 mg/L ±4% of reading at 25 °C @ 525 nm aluminon
Ammonia Low Range 0.00 to 3.00 mg/L (as NH₃-N) 0.01 mg/L ±0.04 mg/L ±4% of reading at 25 °C @ 420 nm Nessler
benchtop
11.10 | www.hannainst.com
LED (λ nm)
Parameter Range Resolution Accuracy
with Narrow Band
Interference Filter Method 11
Color of Water 0 to 500 PCU (Platinum Cobalt Units) 1 PCU ±10 PCU ±5% of reading at 25 °C @ 420 nm colorimetric platinum cobalt
Copper Low Range 0.000 to 1.500 mg/L (as Cu²+) 0.001 mg/L ±0.01 mg/L ±5% of reading at 25 °C @ 575 nm bicinchoninate
Copper High Range 0.00 to 5.00 mg/L (as Cu²+) 0.01 mg/L ±0.02 mg/L ±4% of reading at 25 °C @ 575 nm bicinchoninate
Cyanuric Acid 0 to 80 mg/L (as CYA) 1 mg/L ±1 mg/L ±15% of reading at 25 °C @ 525 nm turbidimetric
Fluoride Low Range 0.00 to 2.00 mg/L (as F¯) 0.01 mg/L ±0.03 mg/L ±3% of reading at 25 °C @ 575 nm SPADNS
Fluoride High Range 0.0 to 20.0 mg/L (as F¯) 0.1 mg/L ±0.5 mg/L ±3% of reading at 25 °C @ 575 nm SPADNS
Hardness, Calcium 0.00 to 2.70 mg/L (as CaCO₃) 0.01 mg/L ±0.11 mg/L ±5% of reading at 25 °C @ 525 nm calmagite
Hardness, Magnesium 0.00 to 2.00 mg/L (ppm) (as CaCO₃) 0.01 mg/L ±0.11 mg/L ±5% of reading at 25 °C @ 525 nm calmagite
Iodine 0.0 to 12.5 mg/L (as I₂) 0.1 mg/L ±0.1 mg/L ±5% of reading at 25 °C @ 525 nm DPD
Iron Low Range 0.000 to 1.600 mg/L (as Fe) 0.001 mg/L ±0.01 mg/L ±8% of reading at 25 °C @ 575 nm TPTZ
Iron High Range 0.00 to 5.00 mg/L (as Fe) 0.01 mg/L ±0.04 mg/L ±2% of reading at 25 °C @ 525 nm phenanthroline
Magnesium 0 to 150 mg/L (as Mg²+) 1 mg/L ±5 mg/L ±3% of reading at 25 °C @ 466 nm calmagite
Manganese Low Range 0 to 300 μg/L (as Mn) 1 μg/L ±10 μg/L ±3% of reading at 25 °C @ 575 nm PAN
Manganese High Range 0.0 to 20.0 mg/L (as Mn) 0.1 mg/L ±0.2 mg/L ±3% of reading at 25 °C @ 525 nm periodate
Molybdenum 0.0 to 40.0 mg/L (as Mo⁶+) 0.1 mg/L ±0.3 mg/L ±5% of reading at 25 °C @ 420 nm mercaptoacetic acid
Nickel Low Range 0.000 to 1.000 mg/L (as Ni) 0.001 mg/L ±0.010 mg/L ±7% of reading at 25 °C @ 575 nm PAN
Nickel High Range 0.00 to 7.00 g/L (as Ni) 0.01 g/L ±0.07g/L ±4% of reading at 25 °C @ 575 nm EDTA
Nitrate 0.0 to 30.0 mg/L (as NO₃̄- N) 0.1 mg/L ±0.5 mg/L ±10% of reading at 25 °C @ 525 nm cadmium reduction
±1.0 mg/L or ±3% of reading at 25 °C,
Nitrate (16 mm vial) 0.0 to 30.0 mg/L Nitrate (as NO₃̄- N) 0.1 mg/L @ 420 nm chromotropic acid
whichever is greater
Nitrite Ultra Low Range, Marine 0 to 200 μg/L (as N0₂̄- N) 1 μg/L ±10 μg/L ±4% of reading at 25 °C @ 466 nm diazotization
Nitrite Low Range 0 to 600 μg/L (as N0₂̄- N) 1 μg/L ±20 μg/L ±4% of reading at 25 °C @ 466 nm diazotization
Nitrite High Range 0 to 150 mg/L (as N0₂̄- N) 1 mg/L ±4 mg/L ±4% of reading at 25 °C @ 575 nm ferrous sulfate
Nitrogen, Total Low Range ±1.0 mg/L or ±5% of reading at 25 °C,
0.0 to 25.0 mg/L (as NO₃̄- N) 0.1 mg/L @ 420 nm chromotropic acid
(16 mm vial) whichever is greater
benchtop
pH 6.5 to 8.5 pH 0.1 pH ±0.1 pH at 25 °C @ 525 nm phenol red
Phosphate Ultra Low Range, Marine 0 to 200 μg/L (as P) 1 μg/L ±5 μg/L ±5% of reading at 25 °C @ 610 nm ascorbic acid
Phosphate Low Range 0.00 to 2.50 mg/L (ppm) 0.01 mg/L ±0.04 mg/L ±4% of reading at 25 °C @ 610 nm ascorbic acid
Phosphate High Range 0.0 to 30.0 mg/L (as PO₄³-) 0.1 mg/L ±1 mg/L ±4% of reading at 25 °C @ 525 nm amino acid
Phosphorus Reactive Low Range ±0.05 mg/L or ±4% of reading at 25
0.00 to 1.60 mg/L (as P) 0.01 mg/L @ 610 nm ascorbic acid
(16 mm vial) °C, whichever is greater
Phosphorus Reactive High Range ±0.5 mg/L or ±4% of reading at 25 °C, vanadomolybdophosphoric
0.0 to 32.6 mg/L (as P) 0.1 mg/L @ 420 nm
(16 mm vial) whichever is greater acid
Phosphorus, Total High Range ±0.5 mg/L or ±5% of reading at 25 °C, vanadomolybdophosphoric
0.0 to 32.6 mg/L (as P) 0.1 mg/L @ 420 nm
(16 mm vial) whichever is greater acid
turbidimetric
Potassium 0.0 to 20.0 mg/L (as K) 0.1 mg/L ±3.0 mg/L ±7% of reading at 25 °C @ 466 nm
tetraphenylborate
Silica Low Range 0.00 to 2.00 mg/L (as SiO₂) 0.01 mg/L ±0.03 mg/L ±3% of reading at 25 °C @ 610 nm heteropoly blue
Silica High range 0 to 200 mg/L (as SiO₂) 1 mg/L ±1 mg/L ±5% of reading at 25 °C @ 466 nm molybdosilicate
Silver 0.000 to 1.000 mg/L (as Ag) 0.001 mg/L ±0.020 mg/L ±5% of reading at 25 °C @ 575 nm PAN
Sulfate 0 to 150 mg/L (as SO₄²-) 1 mg/L ±5 mg/L ±3% of reading at 25 °C @ 466 nm turbidimetric
Surfactants, Anionic 0.00 to 3.50 mg/L (as SDBS) 0.01 mg/L ±0.04 mg/L ±3% of reading at 25 °C @ 610 nm methylene blue
Zinc 0.00 to 3.00 mg/L (as Zn) 0.01 mg/L ±0.03 mg/L ±3% of reading at 25 °C @ 575 nm zincon
HI83399-01 (115V) and HI83399-02 (230V) is supplied with sample cuvettes and caps (4 ea.), digestion vials (6), vial adapter,
Ordering Information cloth for wiping cuvettes, USB to micro USB cable connector, power adapter, instrument quality certificate, and instruction manual.
www.hannainst.com | 11.11
HI83314
11 Multiparameter
Photometer with
COD for
Wastewater
with Digital pH Electrode Input
Chemical Oxygen Demand
To save valuable laboratory benchtop space, • Absorbance mode ·· Space saving having a pH meter and
the HI83314 doubles as a professional ·· Hanna's exclusive CAL Check photometer built into one meter
pH meter with its digital pH/temperature cuvettes for validation of
• Data Logging
electrode input. Now one meter can be used light source and detector
·· Up to 1000 photometric and pH
for both photometric and pH measurements. ·· Allows for the user to plot
readings can be stored by simply
concentration versus absorbance
pressing the dedicated LOG button.
for a specific wavelength for use
benchtop
11.12 | www.hannainst.com
Specifications
Measurement Channels
Range
5 x optical channels; 1 x digital electrode channel (pH measurement)
0.000 to 4.000 Abs 11
Resolution 0.001 Abs
Accuracy ±0.003 Abs (at 1.000 Abs)
Light Source light-emitting diode
Bandpass Filter Bandwidth 8 nm
Absorbance
Bandpass Filter
± 1.0 nm
Wavelength Accuracy
Light Detector silicon photocell
Cuvette Type round, 24.6 mm diameter and 16 mm diameter
LED (λ nm)
with Narrow Band
Parameter Range Resolution Accuracy Interference Filter Method
Ammonia Low Range 0.00 to 3.00 mg/L (as NH₃-N) 0.01 mg/L ±0.04 mg/L ±4% of reading at 25 °C @ 420 nm Nessler
± 0.10 mg/L or ± 5% of reading at 25
Ammonia Low Range (16 mm vial) 0.00 to 3.00 mg/L (as NH₃-N) 0.01 mg/L @ 420 nm Nessler
°C, whichever is greater
Ammonia Medium Range 0.00 to 10.00 mg/L (as NH₃-N) 0.01 mg/L ±0.05 mg/L ±5% of reading at 25 °C @ 420 nm Nessler
Ammonia High Range 0.0 to 100.0 mg/L (as NH₃-N) 0.1 mg/L ±0.5 mg/L ±5% of reading at 25 °C @ 420 nm Nessler
Chlorine, Free 0.00 to 5.00 mg/L (as Cl₂) 0.01 mg/L ±0.03 mg/L ±3% of reading at 25 °C @ 525 nm DPD
Chlorine, Total 0.00 to 5.00 mg/L (as Cl¯) 0.01 mg/L ±0.03 mg/L ±3% of reading at 25 °C @ 525 nm DPD
benchtop
±5 mg/L or ±4% of reading @ 25 °C, ISO, EPA and mercury-free
COD Low Range (16 mm vial)* 0 to 150 mg/L (as O₂) 1 mg/L @ 420 nm
whichever is greater dichromate
±15 mg/L or ±4% of reading @ 25 °C, ISO, EPA and mercury-free
COD Medium Range (16 mm vial)* 0 to 1500 mg/L (as O₂) 1 mg/L @ 610 nm
whichever is greater dichromate
±150 mg/L or ±2% of reading @ 25 °C,
COD HR (16 mm vial)* 0 to 15000 mg/L (as O₂) 1 mg/L @ 610 nm dichromate
whichever is greater
±1.0 mg/L or ±3% of reading at 25 °C,
Nitrate (16 mm vial) 0.0 to 30.0 mg/L (as NO₃̄- N) 0.1 mg/L @ 420 nm chromotropic acid
whichever is greater
Nitrite Ultra Low Range, Marine 0 to 200 μg/L (as N0₂̄- N) 1 μg/L ±10 μg/L ±4% of reading at 25 °C @ 466 nm diazotization
Nitrite Low Range 0 to 600 μg/L (as N0₂̄- N) 1 μg/L ±20 μg/L ±4% of reading at 25 °C @ 466 nm diazotization
Nitrite High Range 0 to 150 mg/L (as N0₂̄- N) 1 mg/L ±4 mg/L ±4% of reading at 25 °C @ 575 nm ferrous sulfate
www.hannainst.com | 11.13
11 General Accessories for
HI83399 and HI83314
HI75110/230 USB power supply HI740034P cap for 100 mL plastic beaker (10)
11.14 | www.hannainst.com
HI93754
certified reagents
operators and the environment.
Vials and caps have been designed
to avoid accidental reagent spills.
Due to the pre-dosed reagents,
the amount of chemicals and
handling time is minimized.
Reagent
COD Test Range Method Code
dichromate EPA‡ HI93754A-25
COD LR 0 to 150 mg/L dichromate mercury-free◊◊ HI93754D-25
dichromate ISO◊ HI93754F-25
COD Standards
HI93754-11 500 ppm COD standard, 500 mL bottle
HI93754-12 14000 ppm COD standard, 500 mL bottle HI93754E
Notes:
* Method with chromium-sulfuric acid is officially recognized by EPA for wastewater analysis.
** This method is recommended for general purpose analysis with no chloride interference.
*** Method follows the official method ISO 15705. COD MR ISO method is 0-1000 mg/L. Meter can read higher.
www.hannainst.com | 11.15
HI839800
The HI839800 COD Test Tube Heater features two predefined Operating Mode timed (0 to 180 minutes) or infinity mode
temperature profiles: 150ºC and 105ºC. Digestions for chemical Block aluminum
oxygen (COD) and total phosphorus are conducted at 150ºC, while Environment 5 to 50°C (41 to 122°F)
total nitrogen digestions are conducted at 105ºC. The test tube heater
Power Supply HI839800-01: 115 VAC; 60 Hz; 250 W; HI839800-02:
automatically heats up to the set temperature, holding it until the (fuse protected) 230 VAC; 50 Hz; 250 W
countdown timer has finished. Once the timer has ended, a beep will
Dimensions 190 x 300 x 95 mm (7.5 x 11.8 x 3.7”)
sound and the heating element will turn off. The outer casing of the
Weight approximately 4.8 kg (10.6 lb.)
HI839800 remains cool to the touch, even during a timed digestion. An
optional lab safety shield and test tube cooling rack provide a complete Ordering HI839800-01 (115V) and HI839800-02 (230V) is
setup for sample digestions. Information supplied with power cable and instructions.
11.16 | www.hannainst.com
Table of Contents 12
Turbidity
Introduction�������������������������12.2
table of contents
Comparison Guides������������������������������������������� 12.5
Turbidity Meters����������������12.6
EPA Meters�����������������������������������������������������������12.6
ISO Meters�����������������������������������������������������������12.17
Wine�����������������������������������������������������������������������12.21
Beer����������������������������������������������������������������������� 12.22
Solutions and
Accessories�����������������������12.24
www.hannainst.com | 12.1
12 Introduction to Turbidity
Turbidity of water is an optical property that causes light to be The Hanna Solution
scattered and absorbed, rather than transmitted. The scattering of
light that passes through a liquid is primarily caused by suspended There are three analytical test methods for turbidity:
solids. The higher the turbidity, the greater the amount of scattered
• ISO 7027 “Water Quality: Determination of Turbidity”
light. Even a very pure fluid will scatter light to a certain degree; no
solution will have zero turbidity. • USEPA Method No. 180.1, “Turbidity”
There are different measurement standards used based on • Seawater and Wastewater No. 2130, “Turbidity”
applications, and with these standards are applied units. The ISO Specific wavelengths are recommended for each method. For the
standard adopted the FNU (Formazin Nephelometric Unit) while the USEPA and Standard Methods, the wavelength in the visible range
EPA uses the NTU (Nephelometric Turbidity Unit). Other units include
Turbidity
Wastewater Treatment and Turbidity Meters compliant with EPA approved methods are designed to meet or
exceed the criteria specified by the USEPA Method 180.1 and Standard
Historically, turbidity is one of the main parameters monitored in Method 2130 B.
wastewater. In fact, the monitoring and treatment process was once
solely based on the control of turbidity. Currently, the measurement of
Principle of Operation
turbidity at the end of the wastewater treatment process is necessary
to verify that the values are within regulatory standards. Generally The light beam that passes through the sample is scattered in all
speaking, the turbidity value has to be between 0 and 50 FTU, with directions. The intensity and pattern of the scattered light is affected
an accuracy of ±3 FTU depending on the phase of the wastewater by many variables, such as wavelength of the incident light, particle
treatment process. By monitoring the turbidity level, it can be size and shape, refractive index, and color. The optical system includes
determined if the different stages of the process, particularly in the a tungsten filament lamp or IR LED, a scattered light detector (90°),
filtration and purification stages, have been completed correctly. and a transmitted light detector (180°).
12.2 | www.hannainst.com
Introduction to Turbidity 12
In the ratio turbidimeter range, the microprocessor of the instrument AMCO AEPA-1 Standard
calculates the turbidity value from the signals that reach the two
detectors by using an effective algorithm. This algorithm corrects Fortunately, since 1982, there is a standard available which overcomes
and compensates for interferences of color, making the turbidimeters the shortcomings of formazin. This has been developed by the
color-compensated. The optical system and measuring technique also American company, Advanced Polymer Systems, and is a suspended
compensate for the lamp or LED intensity fluctuations; minimizing the mixture of styrene divinylbenzene polymer spheres. These standards
need for frequent calibration. have the following characteristics:
In the non-ratio turbidimeter range, the turbidity value is calculated Stability: AMCO AEPA-1 turbidity standards are a stabilized suspension
from the signal on the scattered light detector (90°). This method of cross linked styrene divinylbenzene copolymer microbeads in
offers a high linearity on the low range but is more sensitive to lamp or ultrapure water. These beads are chemically inert and keep their
Turbidity
LED intensity fluctuations. chemical balance in a water medium regardless of concentration.
The lower detection limit of a turbidimeter is determined by stray The size scatter of the beads only ranges from 0.06 to 0.2 microns. This
light. Stray light is the light detected by the sensors that is not caused small size accounts for random Brownian movement of these beads in
by light scattering from suspended particles. The optical systems of suspension, keeping them in constant motion and totally dispersed
turbidimeters are designed to have very low stray light, providing within the ultra pure water matrix.
accurate results for low turbidity samples.
Physical properties: Particle size, uniform shape and refractive
index make these spheres ideal to characterize light absorption and
scatter for 90° behavior in the UV-VIS range. In addition, the bead’s
spherical shape and size impedes the agglomeration or precipitation
of the standard. For these reasons, the AMCO AEPA-1 standards are
very stable.
introduction
standardized with a known light scattering standard. As with all analysis. The evaluation of these data is based on Standard Methods.
analytical standards or reference materials, a turbidity standard should
be able to perform the following: provide traceability, demonstrate
the accuracy of results, calibrate the equipment and methodology,
monitor user performance, validate tests, and facilitate comparability;
this ensures that when the correct procedures have been followed,
the same analysis of the same materials will produce results that
agree with each other whenever they are performed.
www.hannainst.com | 12.3
12 Introduction to Turbidity
Organization indicates 5 NTU as the reference turbidity value of water Treatment Process of Drinking Water
for trade. This value has been established based on the aesthetic
characteristics of water. From a hygienic point of view, 1 NTU is the
recommended value. Many drinking water utilities strive to achieve
levels as low as 0.1 NTU.
12.4 | www.hannainst.com
Comparison Guides 12
Turbidity
Max. Calibration Points
comparison guides
NTU Non-Ratio Mode
Cyanuric Acid (CYAC)
Non-Ratio Mode
PC Connectivity
Iron, LR (Fe, LR)
EPA Compliant
Fast Tracker™
Total Chlorine
Free Chlorine
Bromine (Br)
CAL Check™
Ratio Mode
Backlit LCD
FNU Mode
FAU Mode
Turbidity
Auto-off
Iodine (I)
Logging
Page
GLP
ISO
pH
HI88703 • • • 5 • • • • • • 12.10
HI93414 • • • 4 • • • • • • • • 12.12
HI98703 • 4 • • • • • • • 12.14
HI98713 • 4 • • • • • • • 12.17
HI93703 • 3 • • • 12.20
HI83749 • • 4 • • • • • • • 12.21
HI847492 • 4 • • • • • • 12.22
www.hannainst.com | 12.5
HI83414
12.6 | www.hannainst.com
12
Turbidity
Four Measurement Modes
The HI83414 meets and exceeds the With the powerful CAL Check function,
requirements of EPA and Standard Methods The HI83414 features four measurement
reliable performance of the chlorine
both for turbidity and colorimetric chlorine modes including ratio or non-ratio mode for colorimeter can be validated at any moment
measurements. When in EPA mode all turbidity, free chlorine, and total chlorine. by using the exclusive HANNA ready-made,
turbidity readings are rounded accordingly to NIST traceable standards. All standards are
In ratio mode the turbidity is 0.00 to 4000
meet reporting requirements. supplied with a Certificate of Analysis (COA)
NTU (Nephelometric Turbidity Units) while in
for traceability.
the non-ratio mode the range is 0.00 to 40.0
NTU. The range for free or total chlorine
measurements is 0.00 to 5.00 mg/L (ppm)
range.
EPA meters
to read.
standards. Calibration points can be modified
Multiple Turbidity Units of if user-prepared standards are used. For free
and total chlorine, the CAL Check standard
Measure can be used for calibration to 1.00 mg/L (ppm).
Turbidity can be displayed as nephelometric
turbidity units (NTU), European Brewing
Convention units (EBC) or Nephelos units.
www.hannainst.com | 12.7
12
• All measurements are performed with
25 mm round cuvettes composed
of special optical glass to ensure
maximum repeatability of turbidity
and chlorine measurements.
Turbidity
Contextual Help
Contextual help is always available through
a dedicated HELP button. Clear tutorial
messages and directions are available on-
screen to quickly and easily guide users
Data Logging through setup and calibration. The help
If the calculated calibration coefficients are
outside a certain range a calibration error Up to 200 measurements can be stored in the information displayed is relative to the
message is displayed. internal memory and recalled at any time. setting/option being viewed.
12.8 | www.hannainst.com
CAL Check™ standards with certificate
The HI93414-11 free and total chlorine and HI88703-11 turbidity CAL Check standards
are used for calibration and performance verification of the HI83414.
12
• Supplied with Certificate of Analysis
·· Lot number
·· Expiration date
·· Standard value @ 25 °C
·· Reference meter NIST traceable
• Provided storage containers
·· Light tight
·· Protects from accidental breakage
Turbidity
Range 0.0 to 99.9; 100 to 268 Nephelos
0.00 to 9.80 EBC
Non-Ratio
Mode
0.01; 0.1 NTU
Resolution 0.1; 1 Nephelos
0.01 EBC
Repeatability ±1% of reading or 0.02 NTU (0.15 Nephelos; 0.01 EBC) whichever is greater
Method nephelometric method (90°) or ratio nephelometric method (90° & 180°), adaptation of the USEPA method 180.1 and standard method 2130 B
EPA meters
HI83414 Free and Total Chlorine Specifications
Range 0.00 to 5.00 mg/L (ppm)
Resolution 0.01 mg/L (ppm) from 0.00 to 3.50 mg/L (ppm) ; 0.10 above 3.50 mg/L (ppm)
Accuracy
±0.02 mg/L @ 1.00 mg/L
@25°C/77°F
Method adaptation of the USEPA Method 330.5 and Standard Method 4500-Cl G.
Standards 1.00 mg/L (ppm) free chlorine; 1.00 mg/L (ppm) total chlorine
Connectivity USB
Power Supply 230/115 Vac; 50/60 Hz; auto shut-off after 15 minutes of non-use
Ordering HI83414-01 (115V) and HI83414-02 (230V) are supplied with sample cuvettes and caps (5), calibration cuvettes for turbidity (HI88703-11) and
Information colorimeter (HI93414-11), silicone oil (HI98703-58), cuvette wiping cloth, scissors, power cord, instrument quality certificate, and instruction manual.
12 Precision Turbidity
Benchtop Meter
EPA Compliant
12.10 | www.hannainst.com
12
Turbidity
can be modified if user-prepared standards
to help the user during measurements.
are used.
When enabled, the instrument displays
explanations and a confirmation button
AMCO AEPA-1 Primary Turbidity when a preparation or other operation has to
Standard be performed.
Specifications HI88703
0.00 to 9.99; 10.0 to 40.0 NTU
Range 0.0 to 99.9; 100 to 268 Nephelos
0.00 to 9.80 EBC
Non-ratio Mode
0.01; 0.1 NTU
Resolution 0.1; 1 Nephelos
0.01 EBC
EPA meters
0.00 to 9.99; 10.0 to 99.9; 100 to 4000 NTU
Range 0.0 to 99.9; 100 to 26800 Nephelos
0.00 to 9.99; 10.0 to 99.9; 100 to 980 EBC
Ratio Mode
0.01; 0.1; 1 NTU
Resolution 0.1; 1 Nephelos
0.01; 0.1, 1 EBC
Range Selection automatic
±2% of reading plus 0.02 NTU (0.15 Nephelos; 0.01 EBC);
Accuracy
±5% of reading above 1000 NTU (6700 Nephelos; 245 EBC)
Repeatability ±1% of reading or 0.02 NTU (0.15 Nephelos; 0.01 EBC) whichever is greater
Stray Light < 0.02 NTU (0.15 Nephelos; 0.01 EBC)
Light Detector silicon photocell
Light Source/ Life tungsten filament lamp / greater than 100,000 readings
Display 40 x 70 mm graphic LCD (64 x 128 pixels) with backlight
nephelometric method (90°) or ratio nephelometric method (90° & 180°),
Additional Method
adaptation of the USEPA method 180.1 and standard method 2130 B
Specifications
Measuring Mode normal, average, continuous
Turbidity Standards <0.1, 15, 100, 750 and 2000 NTU
Calibration two, three, four or five-point calibration
Log Memory 200 records
PC Interface USB
Environment 0 to 50°C (32 to 122°F); max 95% RH non-condensing
Power Supply 230/115 Vac; 50/60 Hz); auto shut-off after 15 minutes of non-use
Dimensions 230 x 200 x 145 mm (9 x 7.9 x 5.7”)
Weight 2.5 kg (88 oz.)
Ordering HI88703-01 (115V) and HI88703-02 (230V) is supplied with sample cuvettes and caps (5), calibration cuvettes (HI88703-11),
Information silicone oil (HI98703-58), cuvette wiping cloth, power cord, instrument quality certificate, and instruction manual.
EPA Compliant
The HI93414 meets and exceeds the
requirements of EPA and Standard Methods
both for turbidity and colorimetric chlorine
Multiple reading modes that are uniform in size and density. The
measurements. When the meter is in EPA standards are reusable and stable with a long
mode all turbidity readings are rounded Normal measurement, continuous
shelf life.
accordingly to meet reporting requirements. measurement, or signal averaging
measurement are reading modes available.
GLP Data
CAL Check™ The HI93414 features complete GLP (Good
Laboratory Practice) functions that allow
EPA meters
Calibration
Backlit Display A two, three, or four-point turbidity
calibration can be performed by using
A backlit LCD display provides an easy
the supplied (<0.1, 15, 100, and 750 NTU)
to understand, user-friendly interface.
standards. Calibration points can be modified
Displayed codes guide the user step-by-step
if user-prepared standards are used. For
through routine operation and calibration.
free and total chlorine, the 1.00 mg/L (ppm)
CAL Check standard can be used for Data Logging
Three Measurement Modes calibration and performance verification. Up to 200 measurements can be stored in the
The HI93414 features three options for internal memory and recalled at any time.
measurement including ratio mode for AMCO AEPA-1 Primary Turbidity
turbidity, free chlorine, and total chlorine.
Standard Data Transfer
Turbidity measurements can be made in the
0.00 to 1000 NTU (Nephelometric Turbidity The AMCO AEPA-1 supplied standards are For further storage or analysis options,
Units) range, while free or total chlorine recognized as a primary standard by the logged data can be downloaded to a Windows
measurements can be made in the 0.00 to USEPA. These non-toxic standards are made compatible PC using the RS232 or USB ports
5.00 mg/L (ppm) range. of styrene divinylbenzene polymer spheres and the HI92000 software.
12.12 | www.hannainst.com
12
Turbidity
Install tags near your sampling points for
quick and easy iButton® readings. Each
tag contains a computer chip with a unique
identification code encased in stainless steel.
You can install a practically unlimited amount
of tags.
HI93414 Turbidity
Range 0.00 to 9.99 NTU; 10.0 to 99.9 NTU; 100 to 1000 NTU
ratio nephelometric method (90° and 180°), ratio of scattered and transmitted Fast Tracker™
Method
light; adaptation of the USEPA method 180.1 and standard method 2130 B
For advanced, field applications, the
Measuring Mode normal, average, continuous HI93414 is equipped with Fast Tracker™ Tag
Turbidity Standards <0.1, 15, 100 and 750 NTU Identification System (T.I.S.) that makes data
Calibration two, three or four-point calibration collecting and management simpler than
ever. Fast Tracker™ allows users to record the
EPA meters
HI93414 Free and Total Chlorine time and location of a specific measurement
or series of measurements using iButton®
Range 0.00 to 5.00 mg/L
tags near sampling points for quick and
Resolution 0.01 mg/L (0.00 to 3.50 mg/L); 0.10 mg/L (above 3.50 mg/L)
easy readings. Each iButton® tag contains
Accuracy @25°C /77°F ±0.02 mg/L @ 1.00 mg/L a computer chip with a unique identication
Detector silicon photocell with 525 nm narrow band interference filter code encased in stainless steel.
Method adaptation of the USEPA method 330.5 and standard method 4500-Cl G.
Power Supply 1.5V AA alkaline batteries (4) or AC adapter; auto-off after 15 minutes of non-use
12 Turbidity Meter
Fast Tracker™ Technology,
EPA Compliant
Calibration
A two, three, or four-point turbidity
calibration can be performed by using
the supplied (<0.1, 15, 100, and 750 NTU)
standards. Calibration points can be modified
if user-prepared standards are used.
Data Logging
Backlit Display AMCO AEPA-1 Primary Turbidity
Up to 200 measurements can be stored in the
A backlit LCD display provides an easy Standard
internal memory and recalled at any time.
to understand, user-friendly interface. The AMCO AEPA-1 supplied standards are
Displayed codes guide the user step-by-step recognized as a primary standard by the
through routine operation and calibration.
Data Transfer
USEPA. These non-toxic standards are made
of styrene divinylbenzene polymer spheres For further storage or analysis options,
Multiple reading modes that are uniform in size and density. The logged data can be downloaded to a Windows
Normal, continuous, or signal averaging standards are reusable and stable with a long compatible PC using the RS232 or USB port
measurement are reading modes available. shelf life. and the HI92000 software.
12.14 | www.hannainst.com
12
Turbidity
Install tags near your sampling points for
quick and easy iButton® readings. Each
tag contains a computer chip with a unique
identification code encased in stainless steel.
You can install a practically unlimited amount
of tags.
Fast Tracker™
For advanced field applications, the
HI98703 is equipped with Fast Tracker™ Tag
Specifications HI98703 Identification System (T.I.S.) that makes data
collecting and management simpler than
Range 0.00 to 9.99 NTU; 10.0 to 99.9 NTU; 100 to 1000 NTU
ever. Fast Tracker™ allows users to record the
EPA meters
Range Selection automatic
time and location of a specific measurement
Resolution 0.01; 0.1; 1 or series of measurements using iButton®
Accuracy ±2% of reading plus 0.02 NTU tags near sampling points for quick and
Repeatability ±1% of reading or 0.02 NTU, whichever is greater easy readings. Each iButton® tag contains
a computer chip with a unique identication
Stray Light < 0.02 NTU
code encased in stainless steel.
Light Detector silicon photocell
ratio nephelometric method (90° and 180°), ratio of scattered and transmitted
Method
light; adaptation of the USEPA method 180.1 and standard method 2130 B
Power Supply 1.5V AA alkaline batteries (4) or AC adapter; auto-off after 15 minutes of non-use
HI98703-01 (115V) and HI98703-02 (230V) are supplied with iButton® tags Power USB
Ordering with tag holders (5), sample cuvettes and caps (5), calibration cuvettes, connector
Information silicone oil (HI98703-58), cuvette wiping cloth, batteries, AC adapter,
instruction manual, instrument quality certificate, and rugged carrying case. RS232 Fast Tracker™
• EPA standard
·· Meets the USEPA standards
• Custom calibration points
·· Advanced electronics allow
operators to calibrate the meter
• Logging
·· Log and recall up to 25
different samples.
Turbidity
Turbidity Meter 12
with Fast Tracker™ Technology, ISO
Turbidity
Normal, continuous, or signal averaging
measurement reading modes available.
ISO Compliant
The HI98713 meets and exceeds the
requirements of ISO 7027 method for
turbidity measurements by use of an infrared
LED light source.
ISO meters
Range 0.00 to 1000 FNU
The AMCO AEPA-1 supplied standards are
recognized as a primary standard by the USEPA.
Resolution 0.01 (0.00 to 9.99 FNU); 0.1 (10.0 to 99.9 FNU); 1 (100 to 1000 FNU)
These non-toxic standards are made of styrene
Accuracy ±2% of reading plus 0.1 FNU divinylbenzene polymer spheres that are
Range Selection automatic uniform in size and density. The standards are
Repeatability ±1% of reading or 0.01 FNU, whichever is greater reusable and stable with a long shelf life.
Stray Light < 0.1 FNU
12 Turbidity Benchtop
Meter
ISO Compliant
Turbidity
The HI88713 Precision ISO Turbidity Benchtop Meter is specially designed for water quality measurements, providing reliable and accurate readings,
EPA meters
even within low turbidity ranges. The instrument is based on a state-of-the-art optical system which guarantees accurate results, assures long
term stability, and minimizes stray light and color interferences. Periodic calibration with the supplied standards compensates for any variations in
intensity of the tungsten lamp. The 25 mm round cuvettes composed of special optical glass guarantee the repeatability of turbidity measurements.
The HI88713 meets and exceeds the Measure The HI88713 has a powerful calibration
requirements of ISO 7027 method for function that compensates for variation in
Turbidity can be read as Formazin
turbidity measurements by use of an infrared light intensity. A two, three, four, or five-
LED light source. Nephelometric Units (FNU), Formazin
point turbidity calibration can be performed
Attenuation Units (FAU), European Brewing by using the supplied (<0.1, 15, 100, 750 FNU,
Convention units (EBC), and Nephelometric and 2000 NTU) standards. Calibration points
Turbidity Units (NTU). can be modified if user-prepared standards
are used.
Multiple reading modes
Normal, continuous, or signal averaging
measurement reading modes available
12.18 | www.hannainst.com
Tutorial Mode
Tutorial mode provides additional information 12
to help during measurements. When enabled,
the instrument displays explanations and a
confirmation button when a preparation or
other operation has to be performed.
Contextual Help
Data Logging Backlit Graphic LCD Display
Contextual help is always available through
Up to 200 measurements can be stored in the A graphic LCD display provides an easy to
a dedicated HELP button. Clear tutorial
internal memory and recalled at any time. understand, user-friendly interface. All
messages and directions are available on- messages are in plain text making them easy
Data Transfer screen to quickly and easily guide users to read.
through setup and calibration. The help
For further storage or analysis options,
Turbidity
logged data can be downloaded to a Windows information displayed is relative to the
compatible PC via USB and HI92000 software. setting/option being viewed.
Specifications HI88713
Range 0.00 to 1000 FNU
FNU Mode Resolution 0.01 (0.00 to 9.99 FNU); 0.1 (10.0 to 99.9 FNU); 1 (100 to 1000 FNU)
FAU Mode Resolution 0.1 (10.0 to 99.9 FAU); 1 (100 to 4000 FAU)
ISO meters
0.00 to 1000 NTU;
Range
0.00 to 245 EBC
NTU Non-ratio Mode 0.01 (0.00 to 9.99 NTU); 0.1 (10.0 to 99.9 NTU); 1 (100 to 1000 NTU) / 0.01 (0.00 to 9.99 EBC);
Resolution
0.1 (10.0 to 99.9 EBC); 1 (100 to 245 EBC)
Dimensions / Weight 230 x 200 x 145 mm (9 x 7.9 x 5.7”) / 2.5 Kg (88 oz.)
Ordering HI88713-01 (115V) and HI88713-02 (230V) are supplied with sample cuvettes and caps (6), calibration cuvettes (HI88713-11),
Information silicone oil (HI98703-58), cuvette wiping cloth, power adapter and instruction manual.
12 Turbidity Meter
ISO Compliant
HANNA instruments uses the primary Calibration three points (0 FTU, 10 FTU and 500 FTU*)
standard AMCO-AEPA-1 to avoid all Light Source / Life infrared LED / Life of instrument
formazine-related problems. Formazine Light Detector silicon photocell
is a very toxic, unstable substance, which
1.5V AA (4) /approximately 60 hours of continuous use or 900 measurements;
requires particular care: its standards have Battery Type / Life
auto-off after 5 minutes of non-use
to be prepared only a few minutes before
Environment 0 to 50°C (32 to 122°F); RH max 95% (non condensing)
performing the calibration, and can-not
Dimensions 220 x 82 x 66 mm (8.7 x 3.2 x 2.6’’)
be reused because of their short life. The
HI93703 can be used with both standards. Weight 510 g (1.1 lb.)
HI93703-11
Data Logging 199 measurement, on-demand
*HI93703 has been designed according to the ISO 7027 International Standard, consequently the turbidity unit is the FTU (Formazine Turbidity Unit).
FTU is equivalent to the other internationally recognized unit: NTU (Nephelometric Turbidity Unit).
Portable Turbidity 12
Meter
and Bentonite Monitoring
• GLP Features
·· Meets Good Laboratory Practices
• Backlight
·· Backlit LCD
• Connectivity
·· PC interface via USB
Turbidity
rosé, light reds and whites should be checked
for protein stability before bottling. Hanna
offers a quick test meter to verify the risk
of future protein haze formation. If protein
instability is detected, a subsequent test can
help define the right amount of bentonite to
be added for improving protein stability. It is
important not to overdose bentonite to avoid
stripping wine flavor, body, and significant
loss of color, especially in young red wines.
Moreover, adding only the necessary amount
of bentonite to obtain the desired protein
stability also saves costs.
wine applications
Resolution 0.01 (0.00 to 9.99 NTU); 0.1 (10.0 to 99.9 NTU); 1 (100 to 1200 NTU)
Fast Tracker™
Accuracy @25°C/77°F ±2% of reading plus 0.05 NTU The HI83749 is equipped with Fast Tracker™
Repeatability ±1% of reading of 0.02 NTU, whichever is greater.
Tag Identification System (T.I.S.) that makes
data collecting and management simpler than
Stray Light < 0.05 NTU
ever. Fast Tracker™ allows users to record the
Light Source tungsten filament lamp
time and location of a specific measurement
Light Detector silicon photocell or series of measurements using iButton®
Method ratio nephelometric method tags near sampling points for quick and
Display 60 x 90 mm backlit LCD easy readings. Each iButton® tag contains
a computer chip with a unique identication
Calibration two, three or four points
code encased in stainless steel.
LOG Memory 200 records
HI83749-01 (115V) and HI83749-02 (230V) are supplied with iButton® tags with tag
holders (5), sample cuvettes and caps (6), calibration cuvettes (4), bentocheck reagent,
Ordering
silicone oil (HI98703-58), 1000 µL automatic pipette with two tips and instructions
Information sheet, 25 mL glass vials with caps (4), 1 mL syringe with two tips, funnel, filter paper (25),
cuvette cleaning cloth, 12 VDC adapter, batteries, instructions and rugged carrying case.
12 Haze Meter
for Beer Quality Analysis
The HI847492 is equipped with Fast Tracker™ Tag Identification System (T.I.S.) that makes data
collecting and management simpler than ever. Fast Tracker™ allows users to record the time
and location of a specific measurement or series of measurements using iButton® tags near
sampling points for quick and easy readings. Each iButton® tag contains a computer chip with a
unique identication code encased in stainless steel.
12.22 | www.hannainst.com
Why this instrument is so
important... 12
Beer haze may be defined as an insoluble
or semi-soluble particulate matter which is
small enough to form a colloidal suspension
in beer. These particles scatter transmitted
light and are observed as a degradation in the
transparency of the beer.
Turbidity
problem is due to a cross-linking of polyphenol
and protein.
Methods
A range of stabilization treatments are
Many methods were used to measure turbidity over the years. The Jackson Candle Turbidimeter available for avoiding haze problems. The
was used to measure turbidity as Jackson turbidity units (JTU). The method is visual and is not products have to be controlled on several
considered very accurate. To obtain more accurate readings, a nephelometer should be used as steps during the brewing process, in
a turbidity reading instrument. particular after filtration and before the beer
enters the single tanks.
HI847492 can report the measurements in FTU (Formazin Turbidity Units), EBC (European
Brewing Convention), ASBC (American Society of Brewing Chemists) and HELM. FTU units
are equal to NTU units (Nephelometric Turbidity Units). A conversion table between these Beer Haze Table
measurement units is shown below. Grade EBC ASBC
NTU/FNU/FTU EBC ASBC HELM Brilliant 0.0 to 0.5 0.0 to 34.5
1 NTU/1 FNU/1 FTU 1 0.25 17.25 10 Almost Brilliant 0.5 to 1.0 34.5 to 69
Specifications HI847492
beer applications
0.00 to 9.99; 10.0 to 99.9; 100 to 1000 FTU;
0.00 to 9.99; 10.0 to 99.9; 100 to 250 EBC;
Range
0.00 to 9.99; 10.0 to 99.9; 100 to 17250 ASBC;
0.00 to 9.99; 10.0 to 99.9; 100 to 10000 HELM
Range Selection automatic
Resolution 0.01, 0.1, 1 FTU,EBC,ASBC, HELM
Accuracy ±2% of reading plus 0.05 FTU (0.01 EBC, 0.86 ASBC, 0.5 HELM)
Repeatability ±1% of reading or 0.02 FTU, 0.01 EBC, 0.035 ASBC, 0.2 HELM; whichever is greater
Stray Light <0.1 FTU, 0.03 EBC, 1.73 ASBC, 1 HELM
Light Source LED @ 580 nm
Light Detector silicon photocell
Method ratio nephelometric method.
Display 60 x 90 mm backlit LCD
Calibration two, three or four-point calibration
Log Memory 200 records
Serial Interface USB
Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing
Power Supply 1.5V AA alkaline batteries (4) or AC adapter
Auto-off after 15 minutes of non-use
Dimensions 224 x 87 x 77 mm (8.8 x 3.4 x 3.0”)
Weight 512 g (18 oz.)
HI847492-01 (115V) and HI847492-02 (230V) is supplied with iButton® tags with
tag holders (5), sample cuvettes and caps (6), calibration cuvettes (4), silicone oil
Ordering
(HI98703-58), 25 mL glass vials with caps (4), cuvette cleaning cloth, batteries, AC
Information adapter, HI98501 thermometer, instrument quality certificate, instructions and
rugged carrying case.
HI93701-01 free chlorine (Cl₂) reagent kit, 100 tests HI93701-01 free Chlorine (Cl₂) reagent kit, 100 tests
HI93701-03 free chlorine (Cl₂) reagent kit, 300 tests HI93701-03 free Chlorine (Cl₂) reagent kit, 300 tests
HI93711-01 total chlorine (Cl₂) reagent kit, 100 tests HI93711-01 total Chlorine (Cl₂) reagent kit, 100 tests
Turbidity
HI93711-03 total chlorine (Cl₂) reagent kit, 300 tests HI93711-03 total Chlorine (Cl₂) reagent kit, 300 tests
turbidity calibration standards (<0.1, 15, 100, 750 HI98703-11 turbidity calibration standards (<0.1, 15 100 and 750 NTU)
HI88703-11
and 2000 NTU)
12.24 | www.hannainst.com
Standards and Accessories 12
Turbidity
HI93710-03 pH reagent kit, 300 tests
HI731318 cuvette wiping cloth (4)
HI93711-01 total chlorine (Cl₂) reagent kit, 100 tests
HI731331 glass cuvettes, large (4)
HI93711-03 total chlorine (Cl₂) reagent kit, 300 tests
HI731335N caps for cuvettes, large, turbidity (4)
HI93716-01 bromine (Br) reagent kit, 100 tests
HI92000 Windows® compatible software
HI93716-03 bromine (Br) reagent kit, 300 tests
HI920013 USB cable for PC connection
HI93718-01 iodine (I) reagent kit, 100 tests
HI920011 5 to 9 pin RS232 connection cable
HI93718-03 iodine (I) reagent kit, 300 tests
* Vials marked FNU cannnot be used in FNU mode — for Ratio NTU calibration only.
HI93722-01 cyanuric acid (CYAC) reagent kit, 100 tests
See page HI88713 on page 12.18
HI93722-03 cyanuric acid (CYAC) reagent kit, 300 tests
* Vials marked FNU cannnot be used in FNU mode — for Ratio NTU calibration only.
See page HI98703 on page 12.20
www.hannainst.com | 12.25
12 Standards and Accessories
HI920005 tag holders with tags (5) HI93703-50 cuvette cleaning solution, 230 mL
Turbidity
HI731351 1000µL automatic pipette tips (25) HI731331 glass cuvettes, large (4)
HI740233 filter paper type II (100) HI731335N caps for cuvettes, large (4)
HI740144P 1 mL graduated syringe tips (10) HI920013 USB cable for PC connection
12.26 | www.hannainst.com
Table of Contents 13
Refractometers
Introduction�������������������������13.2
table of contents
Refractometers�����������������13.4
Wort Sugar Analysis ���������������������������������������� 13.3
Sugar in Wine ������������������������������������������������������13.4
Sugar in Food ������������������������������������������������������13.6
Sodium Chloride in Food������������������������������� 13.8
Natural and Artificial
Seawater ������������������������������������������������������������13.10
Ethylene Glycol ������������������������������������������������13.12
Propylene Glycol ���������������������������������������������13.12
www.hannainst.com | 13.1
Hanna Digital
13 Refractometers
• Automatic Temperature Compensation
·· For exceptionally accurate
measurements
• Easy measurement
·· Place a few drops of the sample in
the well and press the READ key
• BEPS
·· (Battery Error Prevention System)
alerts the user in the event
Refractometers
13.2 | www.hannainst.com
HI96841
Digital 13
Refractometer
for Measurement of Wort Sugar
Analysis
• Dual-level LCD
·· Dual-level LCD displays
measurement and temperature
readings simultaneously
• ATC
·· Automatic Temperature Compensation
Refractometers
• BEPS
·· Alerts the user of low battery power
that could adversely affect readings.
• IP65 water protection
·· Built to perform under harsh
laboratory and field conditions.
• Quick, accurate results
·· Readings are displayed in
approximately 1.5 seconds
• One-point calibration
·· Calibrate with distilled or
deionized water
• Small sample size
·· Sample size can be as small
as 2 metric drops
°Plato scale in Brewing • Automatic shut-off
The °Plato scale is a way to quantify the concentration of sugars and dissolved solids in wort. ·· After three minutes of non-use
It is used as an indicator of the potential alcoholic strength of a brewing and expresses the • Stainless steel sample well
fermentability. The HI96841 converts the refractive index reading to °Plato based on the tables ·· Easy to clean and corrosion-resistant
maintained by the International Commission for Uniform Methods of Sugar Analysis (ICUMSA)
• Easy measurement
and the American Society of Brewing Chemists (ASBC).
·· Place a few drops of the sample in
the well and press the READ key
• ABS thermoplastic casing
Specifications HI96841
Range 0 to 30 °Plato
Digital Refractometer for
Sugar Content Resolution 0.1 °Plato Brewing
Accuracy (@25°C/77°F) ±0.2 °Plato The HI96841 Digital Refractometer
Range 0 to 80°C (32 to 176°F) combines form and function into one
compact unit. Featuring a 1.5 second
Temperature Resolution 0.1°C (0.1°F)
response time, the HI96841 measures the
Accuracy (@25°C/77°F) ±0.3°C (±0.5°F)
refractive index of wort and converts it to
Temperature
automatic between 0 and 40°C (32 to 104°F) °Plato with temperature compensation.
Compensation
The improved easy-to-read LCD screen
Measurement Time approximately 1.5 seconds displays temperature units (°C or °F)
Minimum Sample Volume 100 µL (to cover prism totally) and measurements simultaneously. The
Light Source yellow LED HI96841’s IP65 water-resistant casing and
Additional
sealed sample well are built to perform under
Specifications Sample Cell stainless steel ring and flint glass prism
harsh conditions, making it suitable for use in
Auto-off after three minutes of non-use
any brewery.
Enclosure Rating IP65
Dimensions / Weight 192 x 102 x 67 mm (7.6 x 4.01 x 2.6”) / 420 g (14.8 oz.)
Ordering
HI96841 is supplied with battery and instruction manual.
Information
www.hannainst.com | 13.3
HI96811 · HI96812 · HI96813
13
HI96814 · HI96816
Digital
Refractometers
for Measurement of Sugar in Wine
• Dual-level LCD
·· Dual-level LCD displays
measurement and temperature
readings simultaneously
• ATC
·· Automatic Temperature Compensation
Refractometers
• BEPS
·· Alerts the user of low battery power
that could adversely affect readings.
• IP65 water protection
·· Built to perform under harsh
laboratory and field conditions.
• Quick, accurate results
·· Readings are displayed in
approximately 1.5 seconds
• One-point calibration
·· Calibrate with distilled or
deionized water
• Small sample size
·· Sample size can be as small
as 2 metric drops
• Automatic shut-off after a simple user calibration with deionized In addition to % Brix, HI96814 includes
·· After three minutes of non-use or distilled water. Within seconds, the two other scales used in the wine industry:
instrument measures the refractive index of °Oechsle and °KMW.
• Stainless steel sample well
the grape must. These digital refractometers
·· Easy to clean and corrosion-resistant
eliminate the uncertainty associated with °Oechsle (°Oe) is mainly used in the German,
• Easy measurement mechanical refractometers and are ideal for Swiss and Luxenbourgish winemaking
·· Place a few drops of the sample in fast, reliable measurements. industry to measure the sugar content of
the well and press the READ key
must. The °Oe scale is based on specific
• ABS thermoplastic casing Instrument Descriptions gravity at 20°C (S.G.(20/20)) and is the first 3
HI96811, HI96813 and HI96814 convert digits following the decimal point. One °Oe is
the refractive index of the sample to roughly equal to 0.2 % Brix.
Five Instruments for Wine
sucrose concentration in units of percent
Analysis by weight, % Brix (also referred to as °Brix). °Oe = [(S.G.(20/20)) - 1] x 1000
Hanna offers five wine refractometers to The conversion used is based on the ICUMSA
meet the various requirements throughout Methods Book (International Commission for °Klosterneuburger Mostwaage (°KMW) is
the wine industry. The HI96811, HI96812, Uniform Methods of Sugar Analysis). Since used in Austria to measure the sugar content
HI96813, HI96814 and HI96816 Digital Wine the majority of sugar in grape juice is fructose of must. °KMW is related to °Oe by the
Refractometers are rugged, lightweight and and glucose and not sucrose, the reading is following equation:
waterproof for measurements in the lab or sometimes referred to as “Apparent Brix”.
field. °Oe = °KMW x [(0.022 x °KMW) + 4.54]
HI96812 has units of °Baumé. The
°Baumé scale is based on density and was 1 °KMW is roughly equivalent to 1% Brix or 5
Refractive Index originally designed to measure the mass of
°Oe. °KMW is also known as °Babo.
These optical instruments employ the sodium chloride in water. °Baumé is used in
measurement of the refractive index to winemaking to measure the sugar in must.
“Potential” or “probable” alcohol is an
determine parameters pertinent to the The HI96812 converts the % Brix reading
estimation of the alcohol content (% vol/vol)
wine industry. to °Baumé based on the table found in
in finished wine based on the conversion of
the Official Methods of Analysis of AOAC
The actual measurement of the refractive International, 18th Edition. One °Baumé sugar to alcohol. This conversion depends on
index is simple and quick and provides the is approximately equal to 1.8 % Brix, and many factors, such as the type of grapes, the
vintner a standard accepted method for sugar 1°Baumé is roughly equivalent to 1% alcohol grape maturity, the growing region and yeast
content analysis. Samples are measured when the wine is fully fermented. fermentation efficiency and temperature.
13.4 | www.hannainst.com
The HI96813 allows the user to tailor the
13
instrument to their specific needs based on
their experience, since no fixed conversion
factor is universally applicable. The first
conversion is based on the % Brix value and
an adjustable conversion factor between
0.50 and 0.70 (0.55 is a common value).
Refractometers
account and can give a more accurate estimate
of the potential alcohol content in the finished
wine. This conversion is named “C1” on the
meter, and uses the following equation:
Temperature
automatic between 10 and 40°C (50 to 104°F)
Compensation
Minimum Sample
100 µL (to cover prism totally)
Volume
Dimensions / Weight 192 x 102 x 67 mm (7.6 x 4.01 x 2.6”) / 420 g (14.8 oz.)
Ordering
HI96811, HI96812, HI96813, HI96814 and HI96816 are supplied with battery and instruction manual.
Information
Standard HI4020-11 Brix standard 50%, 10 mL
* hidden range
www.hannainst.com | 13.5
HI96800 · HI96801 · HI96802
13
HI96803 · HI96804
Digital
Refractometers
for Sugar Analysis Throughout
the Food Industry
Refractive Index
The actual measurement of refractive index is simple, quick and provides the operator a
standard accepted method for sugar content analysis. Samples are measured after a simple
user calibration with deionized or distilled water. Within seconds these instruments measure
the refractive index, apply any necessary calculations and display the results in the selected
unit. These digital refractometers eliminate the uncertainty associated with mechanical
refractometers and are easily portable for measurements in the field.
Features
These five instruments utilize internationally recognized references for unit conversion and
temperature compensation and employ methodology recommended in the ICUMSA Methods
Book (internationally recognized body for sugar analysis).
Temperature (in °C or °F) is displayed simultaneously with the measurement on the large dual-
level display along with icons for low power and other helpful messages.
13.6 | www.hannainst.com
5 Digital Refractometers for Sugar Analysis to Choose from
13
HI96800 HI96801 HI96802 HI96803 HI96804
Measures the refractive Measures the refractive Measures the refractive Measures the refractive Measures the refractive
index in aqueous index to determine the % index to determine the index to determine the index to determine the %
solutions. Readings can Brix of sugar in aqueous % fructose in aqueous % glucose in aqueous invert sugar in aqueous
also be displayed with solutions. The refractive solutions. The refractive solutions. The refractive solutions. The refractive
sucrose temperature index of the sample is index of the sample is index of the sample is index of the sample is
compensation (nD₂₀) or converted to % Brix converted to % mass (% converted to % mass (% converted to % mass (%
% Brix. concentration units. w/w) concentration units. w/w) concentration units. w/w) concentration units.
Refractometers
Refractive Index range Compensation Compensation Compensation Compensation
with ±0.0005 accuracy algorithms based on algorithms based on algorithms based on algorithms based on
sucrose solution fructose solution glucose solution invert sugar solution
• 0 to 85% Brix range
with ±0.2% accuracy • 0 to 85% Brix range • 0 to 85% fructose • 0 to 85% glucose by • 0 to 85% invert sugar
with an accuracy byweight range with weight range with an by weight range with
of ± 0.2% an accuracy of ± 0.2% accuracy of ± 0.2% an accuracy of ± 0.2%
Making a Standard % Brix Solution Note: Solutions above 60% Brix need to be vigorously
stirred or shaken and heated in a water bath. Remove
solution from bath when sucrose has dissolved. The total
To make a Brix Solution, follow the procedure below: quantity can be scaled proportionally for smaller containers
but accuracy may be sacrificed.
• Place container (such as a glass vial or dropper bottle that has a cover) on an analytical balance.
Example with 25% Brix:
• Tare the balance.
% Brix 25
• To make an X % Brix solution, weigh out X grams of high purity sucrose (CAS #: 57-50-1)
g Sucrose 25.000
directly into the container.
g Water 75.000
• Add distilled or deionized water to the container so the total weight of the solution is 100 g.
g Total 100.000
0.0001 nD;
Sugar Content Resolution 0.0001 nD₂₀; 0.1 % Brix 0.1 % mass 0.1 % mass 0.1 % mass
0.1 % Brix
±0.0005 nD;
Accuracy
±0.0005 nD₂₀; ±0.2% Brix ±0.2% mass ±0.2% mass ±0.2% mass
(@25°C/77°F)
±0.2% Brix
Temperature
automatic between 10 and 40°C (50 to 104°F)
Compensation
Minimum Sample
100 µL (to cover prism totally)
Volume
Dimensions / Weight 192 x 102 x 67 mm (7.6 x 4.01 x 2.6”) / 420 g (14.8 oz.)
Ordering
HI96800, HI96801, HI96802, HI96803 and HI96804 are supplied with battery and instruction manual.
Information
Standard HI4020-11 Brix standard 50%, 10 mL
www.hannainst.com | 13.7
HI96821
13 Digital
Refractometer
for Sodium Chloride Measurement
Throughout the Food Industry
Features
The instrument utilizes internationally recognized references for unit conversion and
temperature compensation. It can display the measurement of NaCl concentration 4 different
ways: g/100 g, g/100 mL, Specific Gravity, and °Baumé.
Temperature (in °C or °F) is displayed simultaneously with the measurement on the large dual
level display along with icons for Low Power and other helpful message codes.
13.8 | www.hannainst.com
Easy to Operate
13
Startup Screens Unit Selection
When the HI96821 is turned on, all of the LCD segments will be Just press the RANGE key to cycle through the HI96821’s units of
displayed followed by the percentage of battery life remaining. measurement (g/100 g, g/100 mL, Specific Gravity and °Baumé).
Calibration Measurement
Perform a quick and easy calibration after startup: Achieve fast, accurate results:
1. Using a pipette, completely cover the prism in the sample well 1. Using a plastic pipette, place sample onto the prism surface
with distilled or deionized water. until the well is full.
2. Press the ZERO key. 2. Press the READ key and the results are displayed in the
selected units.
Refractometers
Making a Standard Sodium Chloride Solution
To make a standard NaCl solution (g/100 g), follow the procedure below:
• Place a container (such as a glass vial or dropper bottle that has a cover) on an analytical balance. Example with g/100 g NaCl:
• Tare the balance. g/100 g NaCl 10
g NaCl 10.000
• To make an X NaCl solution weigh out X grams of high purity dried Sodium Chloride
(CAS #: 7647-14-5: MW 58.44) directly into the container. g Water 90.000
g Total 100.000
• Add distilled or deionized water to the container so the total weight of the solution is 100 g.
Specifications HI96821
Range 0 to 28
Resolution 0.1
g/100 g
Accuracy
±0.2
(@25°C/77°F)
Range 0 to 34
Resolution 0.1
g/100 mL
Accuracy
±0.2
(@25°C/77°F)
Range 1.000 to 1.216
Resolution 0.001
Specific Gravity (S.G.)
Accuracy
±0.002
(@25°C/77°F)
Range 0 to 26
Resolution 0.1
°Baumé
Accuracy
±0.2
(@25°C/77°F)
Range 0 to 80°C (32 to 176°F)
Resolution 0.1°C (0.1°F)
Temperature
Accuracy
±0.3°C (±0.5°F)
(@25°C/77°F)
Temperature
automatic between 10 and 40°C (50 to 104°F)
Compensation
Measurement Time approximately 1.5 seconds
Minimum Sample
100 µL (to cover prism totally)
Volume
Additional Light Source yellow LED
Specifications
Sample Cell stainless steel ring and flint glass prism
Auto-off after three minutes of non-use
Enclosure Rating IP65
Battery Type / Battery Life 9V / approximately 5000 readings
Dimensions / Weight 192 x 102 x 67 mm (7.6 x 4.01 x 2.6”) / 420 g (14.8 oz.)
Ordering
HI96821 is supplied with battery and instruction manual.
Information
www.hannainst.com | 13.9
HI96822
13 Digital
Refractometer
for Natural or Artificial Seawater
Analysis
• Stainless steel sample well The HI96822 is an optical device that is quick and easy to use. After a simple user calibration
·· Easy to clean and corrosion-resistant with distilled or deionized water, a seawater sample can be introduced into the sample well.
• ABS thermoplastic casing
Within seconds, the refractive index and temperature are measured and converted into one
of three popular measurement units: Practical Salinity Units (PSU), parts per thousand (ppt),
or specific gravity (S.G. (20/20)). All conversion algorithms are based upon respected scientific
publications using the physical properties of seawater.
The Hanna HI96822 is the solution to all these issues. It is lightweight, easy to use, cost-
efficient, and extremely accurate. With the ability to read in three of the most widely used
salinity units (PSU, ppt, and Specific Gravity), it is the ideal instrument for any application.
13.10 | www.hannainst.com
Easy to Operate
13
Start-up Screens Unit Selection
When the HI96822 is turned on, all of the LCD segments will be Just press the RANGE key to cycle through the HI96822’s units of
displayed followed by the percentage of battery life remaining. measurement. PSU, ppt, Specific Gravity (20/20).
Calibration Measurement
Perform a quick and easy calibration after start-up: Achieve fast, professional results:
1. Using a plastic pipette, completely cover the prism in the sample 1. Using a plastic pipette, drip sample onto the prism surface until the
well with distilled or deionized water. well is full.
2. Press the ZERO key. 2. Press the READ key and the results are displayed in the selected units.
Refractometers
Making a Standard Sodium Chloride Solution
Sodium Chloride solutions can be used to check the accuracy of the meter. The table below lists
two Sodium Chloride solutions and their expected ppt Seawater value. To make a Standard NaCl
Solution (g/100 g), follow the procedure below: Example Standard NaCl solution:
Expected
• Place container (such as a glass vial or dropper bottle that has a cover) on an analytical balance. NaCl (g) Water (g) Total Seawater
Value (ppt)
• Tare the balance.
3.5%
3.50 96.50 100.000 34
• To make an X NaCl solution weigh out X grams of high purity dried Sodium Chloride NaCl
(CAS #: 7647-14-5: MW 58.44) directly into the container. 10%
10.00 90.00 100.000 96
NaCl
• Add distilled or deionized water to the beaker so the total weight of the solution is 100g.
Ordering
HI96822 is supplied with battery and instruction manual.
Information
www.hannainst.com | 13.11
HI96831 · HI96832
13 Digital
Refractometers
for Ethylene and Propylene Glycol
Analysis
Compensation (ATC)
• Easy measurement
·· Place a few drops of the sample in
the well and press the READ key
• BEPS
·· Alerts the user of low battery power
that could adversely affect readings
• IP65 water protection
·· Built to perform under harsh
laboratory and field conditions.
• Quick, accurate results
·· Readings are displayed in
approximately 1.5 seconds
• Single-point calibration
·· Calibrate with distilled or deionized water
• Small sample size
·· Sample size can be as small
as 2 metric drops
• Automatic shut-off
·· After three minutes of non-use
• Stainless steel sample well HI96831 Ethylene HI96832 Propylene
·· Resists corrosion from salt water Specifications
Glycol Glycol
• ABS thermoplastic casing Range 0 to 100% 0 to 100%
and temperature compensation for glycol Battery Type / Battery Life 9V / approximately 5000 readings
solutions (e.g. CRC Handbook of Chemistry Dimensions / Weight 192 x 102 x 67 mm (7.6 x 4.01 x 2.6”) / 420 g (14.8 oz.)
and Physics, 87th Edition).
Ordering
HI96831 and HI96832 are supplied with battery and instruction manual.
Information
13.12 | www.hannainst.com
Table of Contents 14
Temperature
Introduction������������������������14.2 Dataloggers���������������������14.42
table of contents
Product Spotlights�������������������������������������������14.6 T-Logger������������������������������������������������������������ 14.45
Comparison Guides������������������������������������������ 14.7
Light����������������������������������� 14.46
Portable��������������������������������14.8 Portable Lux Meter���������������������������������������14.46
Thermocouple Thermometers������������������14.8
Thermocouple Probes����������������������������������14.15
Food Thermometers
Introduction�������������������������������������������� 14.25
Thermistor Food
Thermometers��������������������������������������14.28
Thermocouple Food
Thermometers��������������������������������������14.29
Thermistor Thermometers���������������������� 14.33
Thermistor Probes����������������������������������������14.34
Infrared�������������������������������������������������������������� 14.39
Pt100 Thermometers���������������������������������14.40
Pt100 Probes����������������������������������������������������14.41
www.hannainst.com | 14.1
14 Thermometers Introduction
Two empirical temperature scales are in common use: the Celsius and
Fahrenheit scales. These scales are based on two fixed points.
K = °C + 273.15
The Fahrenheit scale uses Fahrenheit (°F) units, where the temperature
of boiling water is taken at 212°F, and the temperature of the freezing
point at 32°F. The scale originally used the temperature of a mixture
of ice and common salt as 0°F, and the inventor’s approximate body
temperature as 96°F. The relationship between the Fahrenheit and
Celsius scales is calculated by:
°F = °C • 9/5 + 32
About Thermometers
Precise process control is one of the most important factors in Achieving Thermometer Accuracy
maintaining high quality in production, just as precision and accuracy
Even though it is easy to show resolutions of 0.1°C with digital
are the key to research. Temperature is a crucial variable in both
thermometers, there is no relationship between resolution and
production and research.
accuracy of measurements.
Glass and metal thermometers use thermal expansion to measure
Here is a list of the main causes that can have an effect on accuracy in
temperature. This method uses a physical law which gives a false
temperature measurements:
sense of reliability, since one assumes the measurement is “true”
because he or she can see how it works. This system is no longer • Instrument
suitable for many reasons and their accuracy and range are very ·· The instrument may have an extended scale and 19,000 points of
limited. Glass construction is fragile and can be dangerous to a
introduction
14.2 | www.hannainst.com
Thermometers Introduction 14
Importance of Accuracy
Up to a few years ago, accuracy was not a very critical aspect and
tolerances of a few degrees did not jeopardize a process. From
the time that hazard analysis and critical control points (HACCP)
programs became a necessity, measurement accuracy has become a
discriminating factor. Due to health risk factors, now an error of a few
tenths of a degree can decide whether food can still be kept or must
be discarded. In 1990, Hanna began to produce thermometers for
our customers’ HACCP programs to comply with new governmental
Temperature
regulations. Soon after, Hanna became the market leader in Europe as a
result of the technological solutions offered to our users.
To partially solve this problem, Hanna has devised the calibration of the
Hanna CAL Check™ Calibration Feature instrument-thermocouple system by dipping the probe in melting ice,
As previously described, the electronic components of an instrument thus allowing the user to calibrate the measuring system at 0°C.
shift with time. Hanna has made it possible for users, with the simple
Thanks to this solution, it is now possible to use thermocouple
introduction
touch of a button, to verify whether the response of the instrument is
within the tolerance limit of ±0.02°C. thermometers for HACCP controls with an accuracy of ±0.3°C, which
is the same performance of our Pt100 or NTC thermometers, but with
The CAL Check system acts by substituting the sensor with an internal a higher response time.
resistor which corresponds to 0°C; thus simulates the response that
the temperature probe would have at 0°C.
Calibration Test Keys
Standardization To check the calibration status of the instrument, calibrated keys have
been prepared in the range from -18 to 70°C. These keys reproduce
Hanna has designed a series of pre-calibrated temperature probes
the value of the sensor at different temperatures. Simply disconnect
with a maximum error of 2°C for trouble-free replacement.
the measuring probe, replace it with the key and ensure that the
instrument reads the simulated value.
Thermocouple Thermometer Calibration
Although quite fast, thermocouple thermometers read with a response Hanna calibrates all thermometers with a standard probe. All NTC
time much slower than other sensors and technologies. Unfortunately, temperature probes are inspected and calibrated with standard
the measurement of the thermocouple emf (electromotive force) instruments. During quality inspection, our technicians make sure that
loses accuracy because of the measuring system itself, based on the the reading errors are within the stated accuracies.
emf generated by the temperature difference between cold and hot
junctions. The same emf may be generated under different conditions, In addition, Hanna provides users with the necessary tools to verify
for example: that your thermometers read accurate values. Our complete line of
electronic thermometers provides fast and precise measurements
·· Hot junction at 100°C; cold junction at 20°C; difference: 80°C
down to a tenth of a degree Celsius.
or Hot junction at 90°C; cold junction at 10°C; difference: 80°C
A temperature difference of 80°C is obtained with two different Hanna thermometers may be divided into four main categories:
temperatures of the sample. It is, therefore, very important to thermistor thermometers, thermocouple thermometers, Pt100
determine the cold junction temperature very precisely. The ability to thermometers and infrared thermometers.
www.hannainst.com | 14.3
14 Thermometers Introduction
Pt100 Thermometers
The operating principle of resistance thermometers is based on the
increase of electric resistance of metal conductors (RTD: Resistance
Temperature Detectors) with temperature.
For all its Pt100 thermometers and probes, Hanna has chosen the
Coefficient, or PTC sensors) or negative (as with the Negative
multiple-wire technology for higher accuracy.
Temperature Coefficient, or NTC thermistors). It is possible to
determine the temperature by applying a potential difference and
measuring the resistance. Infrared Thermometers
All objects emit a radiant energy in the infrared (IR) spectrum that falls
Thermistor sensors are suitable for a temperature range of -50 to
between visible light and radio waves.
150°C (-58 to 302°F). Higher temperatures may damage the semi-
conductor sensor. Accurate temperature measurements are possible
The origins of IR measurements can be traced back to Sir Isaac
(tenths of degree) due to the high sensitivity of the sensor.
Newton’s prism and the separation of sunlight into colors and
electromagnetic energy. In 1800, the relative energy of each color
Thermocouple Thermometers was measured, but it was not until early 20th century that IR
The thermocouple consists of the junction of two wires of different energy was quantified. It was then discovered that this energy is
metals. At a given temperature, a potential difference results at proportional to the 4th power of the object’s temperature.
the opposite extremes of the two wires (Seebeck effect), with the
respective variations linearly related within small intervals. It is therefore IR instrumentation using this formula has been around for over 50
possible to determine the temperature given the potential difference years. They almost exclusively use an optic device that detects the heat
and characteristics of the two metals. The measurement end of the energy generated by the object that the sensor is aimed at. This is then
thermocouple probe is called the hot junction, while the connection of amplified, linearized and converted into an electronic signal which in
the thermocouple to the meter is the cold junction. An error is introduced turn shows the surface temperature in Celsius or Fahrenheit degrees.
as the cold junction is exposed to the ambient temperature. This error
can be eliminated by physically putting the cold junction into an ice Infrared measurements are particularly suitable for areas where it is
bath and forcing a reference temperature of 0°C, or by electronically difficult or undesirable to take surface measurements using
compensating for the cold junction temperature effect. There are conventional contact sensors. Applications for IR meters include
various types of thermocouples, identified by an ANSI code using a letter non-destructive testing of foodstuffs, moving machinery, and high
of the alphabet. The K type is the most commonly used themocouple. temperature surfaces.
14.4 | www.hannainst.com
Thermometers Introduction 14
Temperature
An ideal surface for IR measurements is a black body or radiator with Reference Temperatures
an emissivity of 1.0. Emissivity is the ratio of the energy radiated by an
object at a certain temperature to that emitted by a perfect radiator In 1990, NIST established 17 fixed points of the International
at the same temperature. Temperature Scale (ITS-90) related to reproducible physical
phenomena in nature. The ITS-90 Fixed Points are shown in the
The shinier or more polished the surface, the less accurate the chart below:
measurements. For example, the emissivity of most organic material
and rough or painted surfaces is in the 0.95 region and hence,
suitable for IR measurements.
Equilibrium state K °C
On the other hand, surfaces of highly polished or shiny material, such Vapor pressure point of helium 3 to 5 -270.15 to -268.19
as mirrors or aluminum, may not be appropriate for this application
introduction
Triple point of hydrogen 13.8033* -259.346*
without using some form of filtration. This is due to other factors, namely,
reflectivity and transmissivity. The former is a measure of an object’s Boiling point of hydrogen
17.042* -256.108*
ability to reflect infrared energy while the latter is its ability to transmit it. at a pressure of 33.330.6 Pa
Another important and practical concern with IR measurements is Boiling point of equilibrium hydrogen 20.28* -252.87*
the field of view. Infrared meters measure the average temperature Triple point of neon 27.102 -246.048
of all objects in their field of view. To obtain an accurate result, it is
important that the object completely fills the instrument’s field of Triple point of oxygen 54.361 -218.789
view and there are no obstacles between the meter and the object.
Triple point of argon 83.8058 -189.3442
The distance-to-target ratio, or the optic coefficient, is therefore an
important consideration. Triple point of mercury 234.3156 -38.8344
www.hannainst.com | 14.5
14 Product Spotlights
HI93501
HI935001
HI935004
14.6 | www.hannainst.com
Comparison Guides 14
Interchangeable Probe
Stability Bargraph
Multiple Channels
PC Compatibility
HOLD Feature
Autoranging
CAL Check™
Waterproof
CAL Button
Backlit LCD
K,J,T - type
Temperature
Logging
K-type
T-type
Range
Alarm
BEPS
Page
Thermocouple Thermometers
HI935005 • °C/°F • • • • 14.8
comparison guides
HI935004 • °C/°F • • • 14.31
Thermistor Thermometers
HI93501 °C/°F • • • 14.28
Infrared Thermometers
HI99551 °C/°F • 14.39
Pt100 Thermometers
HI955501 °C • • 14.40
HI955502 °C • 14.40
Temperature Dataloggers
HI141 °C/°F • • • • • • 14.42
www.hannainst.com | 14.7
HI935005
14 K-Type
Thermocouple
Thermometers
• °C/°F Readout
·· Measurements can be displayed in
either degrees Celsius or Fahrenheit.
A simple press of the °C/°F button
will switch between the scales.
• Interchangeable Probes
·· A wide range of K-type thermocouple
Temperature
Dual-channel, 14
K-Type Thermocouple
Thermometer
• Multiple input channels
·· Dual input channels
• HOLD
·· HOLD function
• BEPS
·· Alerts the user of low battery power
that could adversely affect readings
Temperature
• Battery indicator
·· Battery life indicator at startup
• Waterproof
·· Compact, heavy-duty and waterproof
thermocouple thermometers
The HOLD button freezes the display to allow
the user time to record readings.
Specifications HI935002
Range -50.0 to 199.9°C and 200 to 1350°C; -58.0 to 399.9°F and 400 to 2462°F
Resolution 0.1°C (-50.0 to 199.9°C) and 1°C (outside); 0.1°F (-58.0 to 399.9°F) and 1°F (outside)
Battery Type / Life 1.5V AA (3) / approx. 1600 hours of continuous use
Ordering
HI935002 is supplied with batteries and instructions.
Information
Penetration, stainless steel K-type thermocouple temperature probe
HI766C
with 1 m cable
14 0.1° Resolution
K-Type
Thermocouple
Thermometers
• HOLD
·· HOLD function
• BEPS
·· Alerts the user of low battery power
that could adversely affect readings
Temperature
• Battery indicator
·· Battery life indicator at startup
• Backlight
·· Backlit display (N and R versions)
• Waterproof
·· Compact, heavy-duty and waterproof
• Connectivity
·· PC and printer compatible (R version)
The HI93531N and HI93531R feature 0.1°C (-149.9 to 999.9°C); 0.2°C (-200.0 to -150.0°C); 1°C (outside) 0.1°F (-24.9 to
Resolution
a user-activated backlight for low or no 999.9°F); 0.2°F (-249.9 to -25.0°F); 0.3°F (-328.0 to -250.0°F); 1°F (outside)
light conditions. The CAL button allows a ±0.5°C (-100.0 to 999.9°C); ±1°C (outside); ±1°F (-148.0 to 999.9°F); ±1.5°F (outside)
Accuracy
simple one-point calibration in an ice bath (for 1 year, excluding probe error)
at 0°C when probe interchange occurs. The Probe HI766 series K-type thermocouple (not included)*
HI93531R adds RS232 output that allows for
CAL Button N/A yes yes
data transfer to a PC or printer.
Backlit LCD N/A yes yes
The instruments are equipped with BEPS RS232 N/A N/A yes
(Battery Error Prevention System), which 1.5V AA (3) / approximately 500 hours of continuous use (with backlight off); auto-off
Battery Type / Life
alerts the user in the event that low battery after 60 minutes of non-use (can be disabled) Auto-off after 8-60 minutes (HI93532R)
power could adversely affect readings. Environment -10 to 60°C (14 to 122°F); RH max 100%
Ordering
HI93531, HI93531N and, HI93531R are supplied with batteries and instructions.
Information
Penetration, stainless steel K-type thermocouple temperature
HI766C
probe with 1 m cable
Dual-input, K-Type 14
Thermocouple
Thermometers
• HOLD
·· HOLD function
• Multiple input channels
·· Dual input
• BEPS
·· Alerts the user of low battery power
that could adversely affect readings
Temperature
• Battery indicator
·· Battery life indicator at start-up
• Waterproof
·· Compact, heavy-duty and waterproof
• Backlight
·· Backlit display (N and R versions)
• Connectivity
·· PC and printer compatible (R version)
thermocouple thermometers
the difference between the two channels
simultaneously with the high and low of
the difference.
Specifications HI93532 HI93532R The HOLD button freezes the display to allow
Range -200.0 to 999.9°C; 1000 to 1371°C; -328.0 to 999.9°F; 1000 to 2500°F
the user time to record readings.
0.1°C (-149.9 to 999.9°C); 0.2°C (-200.0 to -150.0°C); 1°C (outside) 0.1°F (-24.9 to The HI93532R feature a user-activated
Resolution
999.9°F); 0.2°F (-249.9 to -25.0°F); 0.3°F (-328.0 to -250.0°F); 1°F (outside)
backlight for low or no light conditions. The
Accuracy
±0.5°C (-100.0 to 999.9°C); ±1°C (outside); ±1°F (-148.0 to 999.9°F); ±1.5°F (outside) CAL button allows the operator to perform
(for 1 year, excluding probe error)
a simple one-point calibration in an ice bath
Probe HI766 series K-type thermocouple (not included)* at 0°C when probe interchange occurs.
CAL Button N/A yes
The HI93532R adds RS232 output that allows
Backlit LCD N/A yes
for data transfer to a PC or printer.
RS232 N/A yes
1.5V AA (3) / approximately 500 hours of continuous use (with backlight off); auto-off The instruments are equipped with BEPS
Battery Type / Life
after 60 minutes of non-use (can be disabled); auto-off after 8 minutes (HI93532R) (Battery Error Prevention System), which
Environment -10 to 60°C (14 to 122°F); RH max 100% alerts the user in the event that low battery
power could adversely affect readings.
Dimensions 150 x 80 x 36 mm (5.9 x 3.1 x 1.4’’)
Ordering
HI93532 and HI93532R are supplied with batteries and instructions.
Information
Penetration, stainless steel K-type thermocouple
HI766C
temperature probe with 1 m cable
14 0.1° Resolution
K-Type
Thermocouple
Thermometers
• HOLD
·· HOLD function
• BEPS
·· Alerts the user of low battery power
that could adversely affect readings
Temperature
• Battery indicator
·· Battery life indicator at startup
• Waterproof
·· Waterproof casing
• Backlight
·· Backlit display (N version)
with BEPS (Battery Error Prevention ±0.5°C (-100.0 to 999.9°C); ±1°C (outside); ±1°F (-148.0 to 999.9°F); ±1.5°F (outside)
Accuracy
System), which alerts the user in the event (for 1 year, excluding probe error)
that low battery power could adversely Probe HI766 K-type thermocouple (not included)*
affect readings. CAL Button N/A yes
Ordering
HI93530 and HI93530N are supplied with batteries and instructions.
Information
Penetration, stainless steel K-type thermocouple temperature
HI766C
probe with 1 m cable
K, J, T-Type 14
Thermocouple
Thermometers
• HOLD
·· HOLD function
• BEPS
·· Alerts the user of low battery power
that could adversely affect readings
• Battery indicator
·· Battery life indicator at startup
Temperature
• Waterproof
·· Waterproof casing
thermocouple thermometers
K -200.0 to 999.9°C and 1000 to 1371°C; -328.0 to 999.9°F and 1000 to 2500°F CAL button to allow the operator a simple
Range J -200.0 to 999.9°C; -328.0 to 999.9°F and 1000 to 1832°F one-point calibration in an ice bath at 0°C
T -200.0 to 400.0°C; -328.0 to 752.0°F when probe interchange occurs.
0.1°C (-149.9 to 999.9°C); 0.2°C (-200.0 to -150.0°C); 1°C (1000 to 1371°C); The instruments are equipped with BEPS
K 0.1°F (-24.9 to 999.9°F); 0.2°F (-249.9 to -25.0°F);
0.3°F (-328.0 to -250.0°F); 1°F (1000 to 2500°F)
(Battery Error Prevention System), which
alerts the user in the event that low battery
Resolution 0.1°C (-200.0 to 999.9°C); 0.1°F (-149.9 to 999.9°F);
J power could adversely affect readings.
0.2°F (-328.0 to -150.0°F); 1°F (1000 to 1832°F)
1.5V AA (3) / approximately 500 hours of continuous use (with backlight off);
Battery Type / Life auto-off after 60 minutes of non-use (can be disabled); auto-off after 8 minutes
(HI93551R)
Ordering
HI93551 and HI93551N are supplied with batteries, instructions and protective case.
Information
Penetration, stainless steel K-type thermocouple
HI766C
temperature probe with 1 m cable
14 Dual-channel, K, J, T-
Type Thermocouple
Thermometers
• HOLD
·· HOLD function
• BEPS
·· Alerts the user of low battery power
that could adversely affect readings
• Battery indicator
·· Battery life indicator at startup
Temperature
• Waterproof
·· Waterproof casing
• Backlight
·· Backlit display (HI93552R)
• Connectivity
·· PC and printer compatible (HI93552R)
the difference. K -200.0 to 999.9°C and 1000 to 1371°C; -328.0 to 999.9°F and 1000 to 2500°F
Range J -200.0 to 999.9°C; -328.0 to 999.9°F and 1000 to 1832°F
The HOLD button freezes the display to T -200.0 to 400.0°C; -328.0 to 752.0°F
allow the user time to record readings. The 0.1°C (-149.9 to 999.9°C); 0.2°C (-200.0 to -150.0°C); 1°C (1000 to 1371°C);
°C/°F button switches between the Celsius K 0.1°F (-24.9 to 999.9°F); 0.2°F (-249.9 to -25.0°F);
and Fahrenheit temperature scale. The 0.3°F (-328.0 to -250.0°F); 1°F (1000 to 2500°F)
CLEAR button restarts the evaluation of Resolution 0.1°C (-200.0 to 999.9°C); 0.1°F (-149.9 to 999.9°F);
J
high and low values. 0.2°F (-328.0 to -150.0°F); 1°F (1000 to 1832°F)
output that allows for data transfer to Backlit LCD N/A yes
a PC or printer. RS232 N/A yes
1.5V AA (3) / approximately 500 hours of continuous use (with backlight off); auto-off:
The instruments are equipped with BEPS Battery Type / Life after 60 minutes of non-use (HI93542); selectable after 8 or 60 minutes of non-use
(Battery Error Prevention System), which (HI93552) (can be disabled for all models)
alerts the user in the event that low battery Environment -10 to 60°C (14 to 122°F); RH max 100%
power could adversely affect readings. Dimensions 150 x 80 x 36 mm (5.9 x 3.1 x 1.4’’)
Weight 235 g (8.3 oz.)
Ordering
HI93542 and HI93552R are supplied with batteries, instructions and protective case.
Information
Penetration, stainless steel K-type thermocouple
HI766C
temperature probe with 1 m cable
Probes
General purpose/penetration, stainless steel K-type
HI766E1
thermocouple temperature probe with 1 m (3.3’) cable
Temperature
1 m (3.3’) Cable
Mini Connector
Specifications
Response Time
Code Application Max. Temperature (90% of final value) Probe Dimensions Probe Cable Color / Length
1 m (3.3’) Cable
thermocouple probes
Mini Connector
Specifications
Response Time
Code Application Max. Temperature (90% of final value) Probe Dimensions Probe Cable Color / Length
L 95 mm x dia 1.6 mm
HI766C1 semi-solids, food 300°C (570°F) 4 seconds stainless steel green / 1 m (3.3’)
(3.7 x 0.06’’)
1 m (3.3’) Cable
Mini Connector
Specifications
Response Time
Code Application Max. Temperature (90% of final value) Probe Dimensions Probe Cable Color / Length
L 245 mm x dia 3 mm
HI766D air, gases 300°C (570°F) 20 seconds stainless steel green / 1 m (3.3’)
(9.6 x 0.12’’)
www.hannainst.com | 14.15
HI766
1 m (3.3’) Cable
Mini Connector
Specifications
Response Time
Code Application Max. Temperature (90% of final value) Probe Dimensions Probe Cable Color / Length
L 120 mm x dia 3 mm
HI766E1 liquids, air, gases 900°C (1650°F) 6 seconds stainless steel green / 1 m (3.3’)
(4.7 x 0.12’’)
1 m (3.3’) Cable
Mini Connector
Specifications
Response Time
Code Application Max. Temperature (90% of final value) Probe Dimensions Probe Cable Color / Length
L 220 mm x dia 5 mm
HI766E2 liquids, air, gases 900°C (1650°F) 6 seconds stainless steel green / 1 m (3.3’)
(8.5 x 0.2’’)
14.16 | www.hannainst.com
FC766
Temperature
1 m (3.3’) Cable
Mini Connector
Specifications
Response Time
Code Application Max. Temperature (90% of final value) Probe Dimensions Probe Cable Color / Length
L 155 mm x dia 3 mm
FC766PW Food 300°C (572°F) 15 seconds stainless steel white / 1 m (3.3’)
(6.1 x 0.12’’)
thermocouple probes
1 m (3.3’) Cable
Mini Connector
Specifications
Response Time
Code Application Max. Temperature (90% of final value) Probe Dimensions Probe Cable Color
L 155 mm x dia 3 mm
FC767PW Food 300°C (572°F) 15 seconds stainless steel white / 1 m (3.3’)
(6.1 x 0.12’’)
www.hannainst.com | 14.17
HI766
1 m (3.3’) Cable
Mini Connector
Specifications
Response Time
Code Application Max. Temperature (90% of final value) Probe Dimensions Probe Cable Color / Length
thermocouple probes
1 m (3.3’) Cable
Mini Connector
Specifications
Response Time
Code Application Max. Temperature (90% of final value) Probe Dimensions Probe Cable Color / Length
14.18 | www.hannainst.com
HI766
When using these probes, the handle temperature must never exceed
150°C (302°F) to avoid possible damage to the probe.
Temperature
Probe for measuring the temperature of 90° angle surfaces.
Specifications
thermocouple probes
Specifications
Response Time Cable Color
Code Application Max. Temperature (90% of final value) Probe Dimensions Probe Sensor / Length
solids, furnaces, L 130 mm x dia 8 mm
HI766B2 900°C (1650°F) 3 seconds stainless steel spring-loaded green / 1 m (3.3’)
molds (5.1 x 0.3’’)
Specifications
www.hannainst.com | 14.19
HI766
All probes are made of stainless steel for long life and easy cleaning.
The HI766PX series includes a wide range of probes for measurement
of liquids, air, gas and penetration in semisolids, as well as curved,
Temperature
Specifications
Response Time
Code Application Max. Temperature (90% of final value) Probe Length Probe
Specifications
Response Time
Code Application Max. Temperature (90% of final value) Probe Dimensions Probe
14.20 | www.hannainst.com
HI766
Temperature
Specifications
Response Time
Code Application Max. Temperature (90% of final value) Probe Dimensions Probe
L 155 mm x dia 3 mm
HI766PC semi-solids, meat, rubber 900°C (1650°F) 15 seconds stainless steel
(6.1 x 0.12’’)
Specifications
Response Time
Code Application Max. Temperature (90% of final value) Probe Dimensions Probe
L 250 mm x dia 3 mm
HI766PD air, gases 300°C (570°F) 20 seconds stainless steel
(9.8 x 0.12’’)
thermocouple probes
HI766PE1, General Purpose Probe
General purpose, penetration probe.
Specifications
Response Time
Code Application Max. Temperature (90% of final value) Probe Dimensions Probe
L 155 mm x dia 3 mm
HI766PE1 liquids, air, gases 900°C (1650°F) 6 seconds stainless steel
(6.1 x 0.12’’)
Specifications
Response Time
Code Application Max. Temperature (90% of final value) Probe Dimensions Probe
L 200 mm x dia 5 mm
HI766PE2 liquids, air, gases 900°C (1650°F) 6 seconds stainless steel
(7.8 x 0.2’’)
www.hannainst.com | 14.21
HI766
Specifications
Response Time
Code Application Max. Temperature (90% of final value) Probe Dimensions Probe Cable Length
39.3”
Specifications
Response Time
Code Application Max. Temperature (63.2% F.S.) Probe Dimensions Sensor Wire length
HI766F1 hard to reach areas 480°C (900°F) 1 second dia 2 mm (0.08’’) exposed wires 1 m (3.3’)
HI766F1/5 hard to reach areas 480°C (900°F) 1 second dia 2 mm (0.08’’) exposed wires 5 m (16.4’)
14.22 | www.hannainst.com
HI766
255mm
10"
1.5mm
0.06"
Temperature
Specifications
Response Time
Code Application Max Temperature (90% of final value) Probe Dimensions Sensor Cable Length
thermocouple probes
Probe for measuring the temperature of pipes and tubes.
Specifications
Response Time
Code Application Max. Temperature (90% of final Value) Clamp Opening Diameter Sensor
HI766TV1 pipes, tubes 200°C (390°F) 8 seconds max 35 mm (1.4’’) housed inside the clamp
www.hannainst.com | 14.23
HI766
Specifications
Response Time
Code Application Max Temperature (90% of final value) Probe Dimensions Sensor
L 500 mm x dia 10 mm
HI766TR1 semi-solids, liquids 250°C (482°F) 10 seconds stainless steel
(19.7 x 0.4’’)
Penetration Probes
K-type thermocouple probes with sharp tip for penetration of semi-
solid samples.
HI766TR2
HI766TR3
HI766TR4
Specifications
Response Time
Code Application Max Temperature (90% of final value) Probe Length Sensor
HI766TR3 semi-solids, liquids 250°C (482°F) 10 seconds 1.5 m (5’) stainless steel
14.24 | www.hannainst.com
HACCP and Food Quality Testing 14
Hanna Thermometers for the Food Sector The table below lists recommended temperatures for different
products. It is vital to monitor and document the temperature to which
Operators in the food sector need an extensive range of products food has been exposed.
in order to guarantee the quality and safety of food supplied to the
public while maintaining compliance with local and federal laws. In
Product Temp. Product Temp.
order to satisfy the need for quality, safety, and compliance, Hanna
manufactures a vast range of products with the necessary accuracy
Chunks of Meat ≤ 7°C Smoked Fish ≤ 7°C
and reliability to check the quality of food in all phases of preparation
and distribution.
Minced Meat ≤ 4°C Frozen Food ≤ -18°C
Temperature
Many of Hanna’s portable and pocket thermometer lines have
Innards ≤ 3°C Milk ≤ 7°C
become synonymous with temperature control in restaurants and
catering facilities.
Frozen Chicken ≤ -12°C Fruit and Vegetables ≤ 10°C
Meat
The temperature of meat at slaughterhouses is a vital quality control
test and needs to be checked at various points of production. Fresh
meat should be stored at about 2°C (35.6°F).
www.hannainst.com | 14.25
14 HACCP & Food Quality Testing
Beverages
The temperature of spring or deep well waters that are extracted
for beverage production must be continuously monitored to ensure
purity. During the production of soft drinks, syrup is pasteurized
before being added, to prevent bacteriological problems. In order to
prepare fruit juices, fruit pulp is heated to just below boiling point for a
few seconds to reduce the presence of microorganisms. During both of
these processes, accurate temperature monitoring is crucial.
14.26 | www.hannainst.com
14
Temperature
Chocolate Sanitization of Machinery
Fermentation of cocoa beans is started by increasing the temperature The temperature of cleansing agents, together with their
to about 50°C (122°F). At different stages of chocolate manufacturing concentration, have a significant bearing on how effectively the
such as crystallization, accurate temperature measurement is a must. machinery is sanitized. The temperature for fermentation vessels can
Once the chocolate is ready, the storage temperature should be range from room temperature to 40°C (104°F). For milk and yogurt,
tanks may reach 70°C (158°F) and as high as 150°C (302°F) for steam
monitored to ensure that it stays in the 15°C (59°F) range.
sterilizers. In addition, regulatory bodies recommend a certain minimum
temperature for cleaning agents to be effective; this can vary from
www.hannainst.com | 14.27
HI93501
14 Thermistor
Thermometer
• EN 13485 compliant
• FC762PW thermistor probe
• CAL Check™ feature
• Remaining battery life indication
/ low battery detection
• Auto-off
• IP65 Waterproof casing
Temperature
Specifications HI93501
Range* -50.0 to 150.0°C; -58.0 to 302.0°F
Probe FC762PW general purpose penetration probe with 1 m (3.3’) white cable and white handle
EN 13485:2001
Certification
suitability: storage and transport; climatic environment: E; accuracy class: 1;
Ordering
HI93501 is supplied with FC762PW temperature probe, batteries and instructions.
Information
* The measurement range may be limited by probe type, and applies to the probe shaft.
K-Type 14
Thermocouple
Thermometer
• FC766PW K-type thermocouple probe
• CAL Check™ feature
• Remaining battery life indication/
low battery detection
• Auto-off
• Waterproof casing
Temperature
Food service, food preparation, packaging,
storage and transport of food require
temperature to be monitored or controlled.
Spot checking temperatures with Hanna food
thermometers ensures daily work routines
are carried out at the correct temperature.
Specifications HI935001
Range* -50.0 to 199.9°C / 200 to 300°C; -58.0 to 399.9°F / 400 to 572°F
Resolution 0.1°C (-50.0 to 199.9°C ) / 1°C (200 to 300°C); 0.1°F (-58.0 to 399.9°F) / 1°F (400 to 572°F)
Probe FC766PW penetration, K-type thermocouple probe with 1 m (3.3’) white cable and white handle
1.5V AAA (3) / approximately 3500 hours of continuous use; Our optional
Battery Type / Life
user-selectable auto-off after 8 or 60 minutes of non-use (can be disabled). HI710027 blue
shockproof
limiting condition: -30 to 50°C (-22 to 122°F)
rubber boot offers
Environment storage and transportation condition: -40 to 70 °C (-40 to 158°F) maximum impact
relative humidity 100 % protection.
Storage/transport
-40 to 70°C (-40 to 158°F)
temperature
Ordering
HI935001 is supplied with FC766PW temperature probe, batteries and instructions.
Information
* The measurement range may be limited by probe type, and applies to the probe shaft.
www.hannainst.com | 14.29
HI935007
14 K-Type
Thermocouple
Thermometer
• Fixed K-type thermocouple probe
• CAL Check™ feature
• Remaining battery life indication/
low battery detection
• Auto-off
• IP65 Waterproof casing
Temperature
Specifications HI935007
Range* -50.0 to 199.9°C / 200 to 300°C; -58.0 to 399.9°F / 400 to 572°F
Resolution 0.1°C (-50.0 to 199.9°C) / 1°C (200 to 300°C); 0.1°F (-58.0 to 399.9°F) / 1°F (400 to 572°F)
Probe fixed penetration, K-type thermocouple probe with 1 m (3.3’) white cable and white handle
Ordering
HI935007 is supplied with fixed temperature probe, batteries and instructions.
Information
14.30 | www.hannainst.com
HI935004
T-Type 14
Thermocouple
Thermometer
• EN 13485 compliant
• FC767PW T-type thermocouple probe
• CAL Check™ feature
• Remaining battery life indication
/ low battery detection
• Auto-off
Temperature
• IP65 Waterproof casing
Resolution 0.1°C (-50.0 to 199.9°C) / 1°C (200 to 300°C); 0.1°F (-58.0 to 399.9°F) / 1°F (400 to 572°F)
Probe FC767PW penetration, T-type thermocouple probe with 1 m (3.3’) white cable and white handle
EN 13485:2001
Certification
suitability: storage and transport; climatic environment: E; accuracy class: 1;
Ordering
HI935004 is supplied with FC767PW temperature probe, batteries and instructions.
Information
* Range may be limited by probe type.
www.hannainst.com | 14.31
HI935008
14 T-Type
Thermocouple
Thermometer
• EN 13485 compliant
• Fixed T-type thermocouple
probe for HI935008
• CAL Check™ feature
• Remaining battery life indication
/ low battery detection
Temperature
• Auto-off
• IP65 Waterproof casing
Resolution 0.1°C (-50.0 to 199.9°C) / 1°C (200 to 300°C); 0.1°F (-58.0 to 399.9°F) / 1°F (400 to 572°F)
Probe fixed penetration, T-type thermocouple probe with 1 m (3.3’) white cable and white handle
EN 13485:2001
Certification
suitability: storage and transport; climatic environment: E; accuracy class: 0.5
Ordering
HI935008 is supplied with fixed temperature probe, batteries and instructions.
Information
14.32 | www.hannainst.com
HI93510 · HI93510N
Thermistor 14
Thermometers
• HOLD
·· HOLD Feature
• BEPS
·· Alerts the user of low battery power
that could adversely affect readings
• Battery indicator
·· Battery level indicator at startup
• Backlight
·· Backlit display (N version)
Temperature
• Waterproof
·· Compact, heavy-duty and waterproof
thermistor thermometers
A diverse assortment of HI762 probes and
cable lengths are available. Probes can be
ordered with different handle colors to
prevent cross-contamination.
1.5V AA (3) / approximately 2000 hours of continuous use (with backlight off);
Battery Type / Life HI93510 only: auto-off selectable after 8 or 60 minutes of non-use
(can be disabled)
Ordering HI93510 and HI93510N are supplied with HI762BL temperature probe, batteries
Information and instructions.
Thermistor probes begin on page 14.34; calibration test keys begin on page 14.38 www.hannainst.com | 14.33
HI762
HI762/FC762 Probes
Range -50 to 150°C (-58 to 302°F)
The HI762 and FC762 series with NTC thermistor sensor offers a wide
range of stainless steel probes for measuring liquids, air and gases,
and for penetration in semi-solids.
3 mm
0.12”
thermistor probes
Specifications
1 m (3.3’) Cable 2 m (6.6’) Cable Handle Color
HI762PW — white
FC762PW — white
HI762PBL — blue
HI762A
Thermistor probe for measuring the temperature of air and gases.
3 mm
0.12”
Specifications
1 m (3.3’) Cable 2 m (6.6’) Cable Handle Color
HI762A — white
14.34 | www.hannainst.com
HI762
HI762PWL
Thermistor probe with sharp tip for penetration of semi-solid samples.
5 mm
0.19”
Temperature
3.6 mm
0.15”
Specifications
1 m (3.3’) Cable 2 m (6.6’) Cable 10 m (32.8’) Cable Handle Color
HI762PWL — — white
HI762L, HI762BL
Liquid probe.
3 mm
0.12”
thermistor probes
Specifications
1 m (3.3’) Cable 2 m (6.6’) Cable 10 m (32.8’) Cable Handle Color
HI762BL — — black
HI762W
Wire probe, designed to access hard to reach places. Probe does not
incorporate a handle.
3 mm
0.12”
Specifications
1 m (3.3’) Cable 2 m (6.6’) Cable 10 m (32.8’) Cable Handle Color
HI762W — HI762W/10 —
www.hannainst.com | 14.35
HI765
HI765 Specifications
Range -50 to 150°C (-58 to 302°F)
The HI765 series can be identified by the white cap on the top of the
handle. This series offers a wide range of probes for measuring liquids,
air and gases, and for penetration in semi-solids.
HI765PW, HI765PBL
General purpose, penetration probe with colored handle. 3 mm
0.12”
thermistor probes
Specifications
1 m (3.3’) Cable 10 m (32.8’) Cable Handle Color
HI765PBL — blue
HI765A
Thermistor probe for measuring the temperature of air and gases.
3 mm
0.12”
Specifications
1 m (3.3’) Cable 10 m (32.8’) Cable Handle Color
14.36 | www.hannainst.com
HI765
HI765PWL
Thermistor probe with sharp tip for penetration of semi-solid samples.
5 mm
0.19”
3.6 mm
0.15”
Temperature
Specifications
1 m (3.3’) Cable 2 m (6.6’) Cable Handle Color
HI765PWL — white
HI765L, HI765BL
Liquid probe.
3 mm
0.12”
thermistor probes
Specifications
1 m (3.3’) Cable 10 m (32.8’) Cable Handle Color
HI765L — white
HI765BL — black
HI765W
Wire probe, designed to access hard-to-reach places. Probe does not
incorporate a handle.
3 mm
0.12”
Specifications
1 m (3.3’) Cable 10 m (32.8’) Cable
HI765W1 HI765W/10
www.hannainst.com | 14.37
HI765
HI765BP
Thermistor probe without handle, designed to measure the
temperature of stacked goods.
Temperature
Specifications
1 m (3.3’) Cable 2 m (6.6’) Cable
HI765BP1 —
Hanna test keys offer a fast and simple way of checking the accuracy of your instruments.
thermistor probes
Connect the key to the probe input. If the reading on the display differs more than 0.4°C (0.8°F) from the key rated value, your thermometer
should be recalibrated at our technical service center.
For periodic verification of your thermometer’s calibration, it is recommended to check at least two
points. Choose the test keys with the nominal values closest to the temperature usually measured.
For periodic verification of your thermometer’s calibration, it is recommended to check at least two
points. Choose the test keys with the nominal values closest to the temperature usually measured.
14.38 | www.hannainst.com
HI99551 · HI99556
14
Infrared
Thermometers for
the Food Industry
• HOLD
·· HOLD Feature
• Battery indicator
·· Battery life indicator on startup
• Optional external probe can
also be used (HI99556)
Temperature
The HI99551 and HI99556 thermometers
employ infrared technology to measure
surface temperatures. Infrared readings are
extremely fast, with a response time typically
around one second.
infrared thermometers
IR -10 to 300°C -20.0 to 199.9°C places or for hygiene requirements.
Range Probe
-40 to 150°C -40 to 150.0°C If you must check the core temperature
(HI99556 only)
Ordering
HI9955 x — y
Thermistor probes begin on page 14.36; calibration test keys begin on page 14.38 www.hannainst.com | 14.39
HI955501 · HI955502
14 4-Wire Pt100
Thermometers
• Auto-ranging
• Available with interchangeable
or fixed probe
• Economical
• Missing probe indictor (HI955501)
• Optional protective boot
Temperature
±0.2°C and ±1 digit (-120.0 to 199.9°C); ±1°C and ±1 digit (-170 to 119.9°C and 200 to 450°C);
Accuracy
±1% f.s. and ±1 digit (outside) (excluding probe error)
HI768 Specifications
Range -30 to 350°C (-22 to 622°F)
Sensor Pt100
Temperature
Interchange Error ±0.2°C (±0.4°F)
3 mm
0.12”
Specifications
Probe Handle
Code Application Dimensions Color Cable Length
general
L 205 mm x dia
HI768P purpose/ green 1 m (3.3’)
3 mm (0.12’’)
penetration
Pt100 probes
3 mm
0.12” HI768A
Pt100 probe for measuring the temperature of air and gases.
Specifications
Probe
Code Application Dimensions Cable Length
L 205 mm x dia
HI768A air, gases 1 m (3.3’)
3 mm (0.12’’)
HI768L
Pt100 probe for applications, such as liquid and air.
5 mm
Specifications
0.20”
Probe
Code Application Dimensions Cable Length
L 205 mm x dia
HI768L liquid, air 1 m (3.3’)
5 mm (0.20’’)
www.hannainst.com | 14.41
HI141
14 Temperature
Dataloggers
The HI141 dataloggers are housed in a smooth,
yet tough ABS casing that is sealed against
ingress of dust and water. They can be placed
with goods on the move, on supermarket
shelves and in warehouses. They record the
temperature at a given interval to make sure
that perishable goods are not left unattended,
such as on a loading dock on the other side of
the world. These dataloggers can provide that
extra guarantee that goods never ventured
Temperature
logging intervals and Hanna’s Battery Error temperature sensor feature one or start via the computer software.
Prevention System (BEPS) that will shut the two stainless steel probes on a 1 m • PC Connectivity
meter off when the battery power is too low (3.3’) cable for direct insertion. ·· Logged data can be transferred to a PC
for an accurate measurement.
• LCD Display by simply placing the instrument on the
·· The optional LCD is divided into 3 HI141001 infrared cradle (not included).
areas: the top displays the status of The infrared cradle eliminates the
• Waterproof the datalogger; the middle displays the need to put a connector on the meter
·· The case of the HI141 dataloggers temperature reading, units, and active - an undesirable dirt-trap in the food
is waterproof rated IP67. A channel; the bottom displays useful market and source of problems due
convenient hanging hook is also information regarding alarms, battery, to wear and tear over time. Using the
sample number, and indicating icons. cradle and software, users need just
located at the top of the housing
one PC interface to handle all HI141
on all models that end in “H”. • Data Logging dataloggers, each identified by a
• °C/°F Ranges ·· The HI141 can store up to 16,000 unique ID code. A security password
·· Through the PC application software, measurements at selectable intervals is also able to be set to ensure
all HI141 models can be programmed from 1 second to 24 hours. Users collected data is tamper-proof.
to read in Celsius or Fahrenheit. can also program a delayed logging
• Programmable Alarms
start time up to 199 hours.
• One or Two Channels ·· High and low alarm thresholds can
·· HI141 dataloggers offer the option of • Magnetic Start Key be programmed to alert users if the
one or two measurement channels. ·· Once all the settings are programmed temperature readings go outside
Users can opt for one internal using the PC software (for 32-bit of the acceptable range. The PC
channel, one external channel, one systems), a convenient and portable software (for 32-bit systems) can
internal and one external channel, magnetic start key can be used to also indicate the length of time that
or two external channels. initiate when data logging begins. This temperatures remained unacceptable.
14.42 | www.hannainst.com
14
Temperature
·· The HI141 series uses AA batteries
to achieve a long battery life
of about 4 years at 25°C.
-40.0 to 80.0°C /
HI141AH • 1 internal —
-40.0 to 176.0°F
-40.0 to 125.0°C /
HI141BH • 1 external 1 m (3.3’)
-40.0 to 257.0°F
-20.0 to 70.0°C /
HI141CH • • 1 internal —
-40.0 to 158.0°F
-40.0 to 125.0°C /
HI141DH • • 1 external 1 m (3.3’)
-40.0 to 257.0°F
-40.0 to 80.0°C /
Model 1 internal
-40.0 to 175.0°F
Specific HI141EH • 1 m (3.3’)
-40.0 to 125.0°C /
1 external
-40.0 to 257.0°F
dataloggers
-40.0 to 125.0°C /
HI141FH • 2 external 1 m (3.3’)
-40.0 to 257.0°F
-20.0 to 70.0°C /
1 internal
-40.0 to 158.0°F
HI141GH • • 1 m (3.3’)
-40.0 to 125.0°C /
1 external
-40.0 to 257.0°F
-40.0 to 125.0°C /
HI141JH • • 2 external 1 m (3.3’)
-40.0 to 257.0°F
Resolution 0.1°C (-40.0 to 100.0°C); 0.2°C (> 100.0°C) 0.1°F (-40.0 to 190.0°F); 0.3°F (> 190.0°F)
±0.5°C (-40.0 to 0.0 and 70.0 to 100.0°C); ±0.4°C (0.0 to 70.0°C); ±1.0°C (> 100.0°C); ±1.0°F (-40.0 to 32.0 and 158.0 to 212.0°F);
Accuracy
±0.8°F (32.0 to 158.0°F); ±2.0°F (> 212.0°F)
Battery
3.6V lithium AA battery / approx. life of 4 years at 25°C
Type / Life
All Models
Environment RH 100%
Height 35 mm (1.4’’)
Ordering
All HI141 models are supplied with 3.6V Lithium AA battery, magnetic key and instructions.
Information
HI141000 Windows® compatible software (required)
www.hannainst.com | 14.43
HI140
14 Temperature
Dataloggers
The HI140 dataloggers represent the most
economical and secure way of monitoring
temperature continuously over long periods
of time. These models are housed in a
rugged, waterproof ABS casing that seals
against the ingress of dust and water. HI140
dataloggers feature different temperature
ranges to make them more accurate for
your specific needs. They can be placed with
goods on the move, on supermarket shelves
Temperature
• Waterproof
·· The case of the HI140 dataloggers
is waterproof rated IP67.
• °C/°F Ranges
·· Through the application software,
all HI140 models can be programmed
to read in Celsius or Fahrenheit.
• Data Logging • PC Connectivity
·· The HI140 can store up to 7600 ·· Logged data can be transferred to a PC
measurements at selectable intervals by simply placing the instrument on the
from 1 minute to 24 hours. Users can HI90140 infrared cradle (not included).
also program a delayed logging start Using the cradle and software,
time from 0 minutes to 24 hours. users need just one PC interface to
dataloggers
All loggers have the following features: programmable high and low alarm thresholds; programmable logging interval from 1 min. to 23 hours and 59 min; logging delay start selectable
from 0 min. to 23 hours and 59 min; programmable ID number; infrared communication with PC interface; programmable real time clock; 3 x 1.5V AA batteries (included) with approx. life
of 4 years at 25°C; dimensions: dia 86.5 mm x h 35 mm; / weight: 150 g
14.44 | www.hannainst.com
HI143
T-Logger with 14
Locking Wall Cradle
The HI143 T-Logger temperature dataloggers are
housed in a smooth, yet tough watertight casing
that is sealed against ingress of dust and water
jets. They can be placed with goods on the move,
on supermarket shelves and in warehouses.
They record the temperature at a given interval
to make sure that perishable goods are not left
unattended, such as on a loading dock on the
other side of the world. These dataloggers can
provide that extra guarantee that goods never
Temperature
ventured out of limits of public safety.
dataloggers
software, the button on the face of
the datalogger, or at a set time.
• PC Connectivity
·· The HI143 can be controlled through a PC
by simply placing the instrument on the
supplied RS232 or USB communication
Specifications HI143 cradle. A security password is able
Range -30.0 to 70.0°C/-22.0 to 158.0°F
to be set to ensure collected data
is tamper-proof when transferring
Resolution 0.1°C/0.1°F
and organizing logged data.
Accuracy ±0.4°C (-20 to 60°C); ±0.6°C (outside); ±0.7°F (-4 to 140°C); ±1.1°F (outside)
• Programmable Alarms
Calibration factory-calibrated
·· High and low alarm thresholds
Data Logging up to 4000 samples
can be programmed to alert users
Logging Interval user selectable, from 1 minute to 24 hours if the temperature readings go
Battery Type / Life CR2032 3V lithium ion / approximately 2 years outside of the acceptable range.
Protection IP65 (water-resistant) • Status Indicator Light
Dimensions 60 x 37 x 17 mm (2.4 x 1.5 x 0.7’’) ·· The LED light located on the cradle blinks
HI143 is supplied with CR2032 lithium battery, wall cradle, lock and instructions.
to indicate that communication with
the PC is active during data transfer.
HI143-00 is supplied with HI143 logger, HI143001 RS232 communication cradle,
Windows® compatible application software, CR2032 lithium battery, wall cradle, • Enhanced Battery Life
Ordering
lock and instructions.
Information ·· The HI143 series uses CR2032 3V
HI143-10 is supplied with HI143 logger, HI143002 USB communication cradle,
lithium ion batteries to achieve a long
Windows® compatible application software, CR2032 lithium battery, wall cradle,
lock and instructions.
battery life of about 2 years at 25°C.
www.hannainst.com | 14.45
HI97500
Specifications HI97500
0.001 to 1.999 Klux
Range 0.01 to 19.99 Klux
0.1 to 199.9 Klux
0.001 Klux
Resolution 0.01 Klux
0.1 Klux
Ordering
HI97500 is supplied with battery, protective case and instructions.
Information
14.46 | www.hannainst.com
Table of Contents 15
Process Instrumentation
Introduction�������������������������15.2 Analog Transmitters������15.71 pH and ORP Submersible/In-line������������15.99
table of contents
In-line Conductivity�������������������������������������15.100
Comparison Guides������������������������������������������� 15.2 Level��������������������������������������������������������������������� 15.57
Flow-thru Conductivity����������������������������� 15.101
Product Spotlights�������������������������������������������� 15.5 pH and EC������������������������������������������������������������15.72
Submersion Probes������������������������������������� 15.101
pH and ORP�������������������������������������������������������� 15.73
Stainless Steel Temp. Probes�����������������15.102
Fertigation���������������������������15.6 Conductivity������������������������������������������������������15.74
Glass Body Probes����������������������������������������15.102
Portable Calibrators���������������������������������������15.75
Fertigation Control Systems������������������������15.6
PCA300 Family�������������������������������������������������15.10
Pumps��������������������������������� 15.76 By-pass Loop��������������������������������������������������15.103
Submersible����������������������������������������������������15.104
In-line Applications��������������������������������������15.105
Controllers������������������������� 15.16 Electrodes������������������������ 15.80 Immersion��������������������������������������������������������15.106
Swimming Pool and Spa�������������������������������15.16 Introduction������������������������������������������������������15.80
Digital Controllers������������������������������������������ 15.26 Flat Tip Industrial ������������������������������������������ 15.85
Analog Controllers����������������������������������������� 15.35 Amplified������������������������������������������������������������15.88
Mini Controllers�����������������������������������������������15.44 Continuous Flow Thru���������������������������������� 15.92
Controller Pumps��������������������������������������������15.58 Quick & Easy BNC Connector�������������������� 15.95
Process Controllers����������������������������������������15.61 pH and ORP T-type Connection��������������� 15.97
www.hannainst.com | 15.1
15.2
comparison guides Process Instrumentation
15
HI710
HI720
HI700
HI504
pH502
pH500
mV600
HI8051
HI8002
HI8001/
PCA310
PCA330
PCA320
PCA340
•
pH Time/volume Irrigation
10
10
control programs
Total and
•
•
•
ORP Free Chlorine
32
24
Irrigated sectors
•
•
•
pH
•
•
Conductivity
4
4
Fertilization control by EC
•
TDS ORP Fertilization control
by volume
•
•
•
•
•
•
Temperature Temperature
pH correction
acid
acid
or alk.
or alk.
•
•
Logging
2
3
Logging EC probes
Comparison Guides
•
•
•
•
•
•
Alarm
1
2
Alarm pH probes
| www.hannainst.com
PCA Series Analyzers
•
•
•
PC connection Agitators control
D
D
(S)ingle or (D)ual setpoint
S or D
S or D
S or D
S or D
•
•
Analog output
Filter control,differential
•
•
•
•
•
•
ON/OFF control presostate
2 and 2
2 and 2
•
Password protection
Fertigation Control Systems
•
•
•
15.10
15.10
15.10
15.10
•
•
•
•
PID control 1 Temperature sensor
•
Control/mixing of
•
SSR relay
water sources
BL121
BL120
Digital output
RS232
RS232
RS485
RS485
RS485
RS485
Volum. counters
1 irrig.
1 irrig,
4 fert.
•
•
Acid dosing
(S)ingle or (D)ual
S
S
S
S
•
•
S or D
S or D
Analog output chlorine dosing
•
•
•
•
•
•
•
•
Password protection pH
external
correction,
4 fertilizer, 3
1 external, pH
alk., 1 mixing, 5
incoming water
•
•
4 fertilizer, 1 acid/
•
•
Sensor Check™ ORP
•
•
•
•
•
•
Automatic cleaning Temperature
•
• Logging
Page Motorized dosing valves
1 pH
15.31
15.33
15.32
15.26
15.34
15.34
15.28
•
•
4 fertilizer
correction,
Alarm
•
•
PC connection
Pumps
•
1 fertilizer
Analog output
1 irrigation
3 Irrigation,
•
•
Password protection
Page
15.6
15.6
Page
15.16
15.16
Comparison Guides 15
Process Instrumentation
(S)ingle or (D)ual setpoint
Adjustable overdosing
Dissolved Oxygen
Recorder output
Self diagnostics
Dosing outputs
Conductivity
Backlight
control
Alarm
Page
ORP
pH
HI8510 • • • 1 • 15.37
HI8710 • • • S 1 • • • • 15.38
HI8711 • • • D 2 • • • • 15.39
HI8720 • • • S 1 • • • • 15.40
HI8931 • • • S 1 • • • • 15.41
HI943500 • • • S 1 • • 15.42
HI8410 • • • S 1 • • • • 15.43
comparison guides
Mini Controllers
Resolution
Guide pH ORP EC TDS Resistivity Level ATC 1.0 0.1 0.01 Page
BL981411 • • 15.46
BL931700 • • 15.47
BL982411 • • 15.48
BL932700 • • 15.49
BL983313 • • • 15.50
BL983320 • • • 15.50
BL983322 • • • 15.50
BL983317 • • • 15.51
BL983327 • • • 15.51
BL983315 • • • 15.52
BL983319 • • • 15.52
BL983321 • • • 15.52
BL983329 • • • 15.52
BL983318 • • • 15.53
BL983324 • • • 15.54
BL983314 • • • 15.55
HI7871 • 15.56
HI7873 • 15.56
HI7874 • 15.57
www.hannainst.com | 15.3
15 Comparison Guides
Proportional
Process Instrumentation
Recorder
contacts
Dosning
contact
dosing
output
Alarm
Page
ORP
pH
BL7916 • • 1 1 • 15.59
BL7917 • • 1 1 • 15.60
Agriculture applications
Password protection
Proportionall control
tower applications
Boiler and colling
ON/OFF control
Digital output
Temperature
Conductivity
PID control
Digital
Alarm
Page
ORP
TDS
pH
HI9913 • • • S • • • 15.66
HI9935 • • • S • • • 15.67
comparison guides
HI9910 • • S • • 15.68
HI9931 • • S • • • 15.69
HI9934 • • S • • • 15.70
HI8000 series
Conductivity
Designed for
Output
Casing
Page
ORP
LCD
ATC
pH
15.4 | www.hannainst.com
Product Spotlights 15
BL120/BL121
Process Instrumentation
Feed Pump
The BL120 and BL121 are an all-in-one solution for automatic control
of pH and chlorine levels in swimming pool, hot tub, and spa water.
PCA340
product spotlights
HI8000 Series
www.hannainst.com | 15.5
HI8000 Series
15 Fertigation Control
Systems
• Connectivity
·· PC compatible
• Alarm
·· Alarm and warning system
• Backlight
Process Instrumentation
Wall Mount
Variety and customization of models ratiometric; type of pH correction: acid or alkaline; control of incoming
water: one, two or three sources of water; control of dosing with
A wide variety of models are available to cover the requirements
venturi or motorized electrovalves; redundancy of the conductivity or
of specific fertigation applications. The HI 8000 series are fully
pH probes; mounting solution: panel or wall mounted.
fertigation control systems
HI8000 series models can be selected based on the irrigation and Irrigation control
fertilization type of control along with the additional features that are Irrigation control differs based on the type of control: by irrigation
proper for the specific application. water volume or by irrigation time; the number of sectors that have
to be irrigated, the available sources of water for irrigation – one or
Some of the most important criteria in selection of controller type are:
more with or without reusing the irrigation drain water.
number of irrigated sectors: 8, 16, 24, 32; type of irrigation control:
in volume or in time; type of fertilizer control: by EC, by Volume,
Irrigation control is started by opening the irrigation valves and
starting the main irrigation pump. The control of all these elements is
performed by the controller based on concepts of irrigation programs.
Irrigation programs
Up to 10 irrigation programs can be set by the user with different
irrigation parameters: irrigation periods, type of irrigation control,
irrigated sectors and volume or irrigation time specified for each sector,
conditions to start irrigation such as time, accumulated solar radiation,
low level in tanks (hydroponic crops), temperature variations, linked
to another program, priority of program, number of repetitions. For
irrigation water, each program has a defined pH set point, EC set point
(if the quantity of fertilizer is dosed according with conductivity), and
receipt of fertilizers. Control of agitators is specified by programs
Panel Mount according with the irrigation periods.
Irrigation water
The quality of irrigation water is assured by proper control of pH and
the quantity of nutrients (fertilizers) present in irrigation water.
15.6 | www.hannainst.com
15
Fertilization control
Fertilizer can be dosed during irrigation using the Venturi tubes
principal or with motorized valves. The control of the quantity of dosed
fertilizer can be performed using the volume counters. The system
supports dosing from up to 4 fertilizer tanks with specific receipts.
Process Instrumentation
The concentration of the fertilizer in irrigation water can be controlled
based on the conductivity reading, proportional with irrigation water
based on the receipt or ratiometric, in which case the certain quantity of
fertilizers are added with the amount of programmed water.
pH control
The pH control is performed in order to adjust the pH of water to the
irrigation program set point.
www.hannainst.com | 15.7
15
Process Instrumentation
HI8001 (panel mount) and HI8002 (wall mount) instrument reads up to 3 EC probes, one to verify the water incoming
EC, and the other two redundant in-line for safety, to measure the
models current irrigation water EC. The two pH inputs are mounted in-line
The HI8001 and HI8002 fertigation controllers provide up to 10 redundant for safety to read the irrigation water pH. This instrument
fertigation control systems
programs to irrigate up to 32 sectors using time or volume irrigation provides an alarm system and logging organized on three user
control. Each irrigation program has one pH and one EC setpoint. The selectable levels. An important added feature is this models ability
start condition of the program, the irrigation sectors and the time
to mix 3 sources of incoming water. Fresh water, reused water and all
or volume for each sector are user defined. The irrigation water is pH
dosing are performed based on the motorized valves that are activated
corrected based on the pH control, with acid or alkaline solution and can
by motors that allow different flows of the fertilizers, acid and alkaline
contain nutrients for crops based on up to 4 fertilizer receipts. Correction
solutions used for pH correction.
of time or volume of irrigated water can be based on accumulated solar
radiation or can be manually requested by user. Agitator control and
filter cleaning control are performed automatically. The instruments
read up to 3 EC probes, one to verify the incoming water EC, and the
other two are in-line redundant for safety to measure the current
irrigation water EC. The two pH electrodes are mounted in-line
redundant for safety to read the irrigation water pH. The instruments
provide an alarm system and logging organized on user selectable
three levels.
15.8 | www.hannainst.com
15
Models HI8001/HI8002 HI8051
Time/volume control, 10 programs/5 priority levels Time/volume control, 10 programs/5 priority levels
Irrigation control
with up to 99 repetition with up to 99 repetition
Irrigation start condition By Time, by solar radiation, by 5 external tank low level By Time, by solar radiation, by 5 external tank low level
Filter control/cleaning 2 differential presostate/2 filter cleaning relays 2 differential presostate/2 filter cleaning relays
Process Instrumentation
Fertilizer tank levels/
Level Level and counters
counters control
Temperature No 1
Wind speed No No
Irrigated sectors Up to 32 Up to 24
PC connectivity RS 232
Dimensions wallmounted: 280 x 330 x 165 mm (11.2 x 13.2 x 6.6”); panel mounted: 178 x 260 x 116 mm (7.1 x 10.4 x 4.6”)
Weight wall mounted: 4.95 Kg (11 lb.); panel mounted: 3.4 Kg (7.5 lb.)
HI8001-0100U Fertigation controller with priorityfor HI8002-0100U Fertigation controller with priority for HI8051-0300D Acid based fertigation controller
pH and EC, panel mount, 8 sectors, English, 115V. pH and EC, wall mount, 8 sectors, English, 115V. with dual pH control, differential EC control, actuator
HI8001-0200D Fertigation controller with priority HI8002-0100D Fertigation controller with priority for control, multiple dosing and irrigation pump control,
for pH and EC, panel mount, 16 sectors, English, 230V. pH and EC, wall mount, 8 sectors, English, 230V. panel mount, 24 sectors, English, 230V.
HI1001 “flow-thru”, double junction pH electrode with BNC connector and 3 m (10’) cable.
1 or 2 electrodes are needed (2 electrodes for probe redundancy feature)
HI3001 “flow-thru”, 4 platinum ring EC probe with built-in temperature sensor & 3 m (10’) cable.
Recommended 1, 2 or 3 probes are needed (2 for probe redundancy feature; 3 for probe redundancy feature and EC water incoming compensation)
Accessories
HI60542 Electrode Holder for Direct Pipe (Order according with the total amount of ordered probes)
pH electrodes begin on page 2.122; pH and ORP solutions begin on page 2.142;
EC solutions begin on page 5.34 www.hannainst.com | 15.9
PCA300 Family
• Colorimeter diagnostics
• Reagent reminder
• Amplified pH/temperature probe
• Data logging of up to 3500 measurements
• GLP data for review of
calibration information
• Digital RS485 output
• Two analog outputs for recording
or dosing devices (PCA340)
• Two dosing relays
• SPDT alarm relay
• SPDT system error relay
• Warning messages
analyzers
The PCA family are process analyzers for the chlorine measurement is adjustable from dosing relay can be activated by either on/off
continuous measurement of chlorine, pH 3 to 90 minutes. These analyzers have a or proportional control.
(PCA320, PCA330, PCA340) and temperature. dosing relay for the addition of chlorine by
These analyzers feature built in data logging, a dosing pump or chlorine generator when The PCA340 features two selectable 0-20
RS485 digital output, dosing relays, and a reading is below the programmable set or 4-20 mA signal output that are scalable
alarm relays packaged in a wall mount Nema point. The technology used by this family for for the transmission of readings to external
4x enclosure. The PCA340 also features two chlorine measurement is the same as that recording devices. The analog outputs can
analog outputs. found in portable and benchtop colorimeters also be set for dosing and used with dosing
providing for consistent results when pumps that accept a 4-20 mA analog input.
This family uses DPD Colorimetric method performing process verification with one of
The analog outputs can be used for any of the
in which N, N-Diethyl-p-phenylenediamine those types of meters.
three measured parameters.
indicator and a buffer are mixed together
with the sample. The resulting chemical The PCA320, PCA330 and PCA340 also utilize
Through the system setup menu, users have
reaction causes a magenta color to form in the HI1005 amplified pH electrode with a built
the ability to enable or disable the low and
the presence of chlorine. The color intensity in pt100 temperature sensor and matching
is proportional to the concentration. The pin to measure both pH and temperature. The high level of alarms for all parameters. The
color intensity is measured photometrically built in amplifier and matching pin provide PCA family also offers overdosing protection
(light source at a specific wavelength and a for exceptional performance against any that generates an alarm if something within
photodetector) and converted to chlorine electrical noise generated by pumps and the system is not working properly. The
concentration, in mg/L, which is displayed motors. These analyzers have a programmable system will stop processes until the user
on the front panel. The sampling interval for dosing relay for the adjustment of pH. The corrects the error.
15.10 | www.hannainst.com
Digital RS485 Output
These analyzers have a RS485 digital output
that allows for connection to a Windows
15
compatible PC running the HI92500 software.
The software allows for remote monitoring,
review of logged data, events and errors, and
executing setup options.
Process Instrumentation
for the transmission of readings to external
recording devices. The analog outputs can
also be set for dosing and used with dosing
pumps that accept a 4-20 mA analog input.
The analog outputs can be used for any of the
three measured parameters.
Amplified pH/Temperature
Probe (PCA320, PCA330,
PCA340)
An integrated pt100 temperature sensor
analyzers
Nema 4X Protection allows for automatic temperature
compensation of pH measurements and
These analyzers are enclosed in waterproof
allows for monitoring temperature as well.
casing for superior protection against the
The built in amplifier and matching pin
elements. The front door of the case has a
provides for exceptional performance where
window for the measurement display while
also shielding the DPD reagents from UV light other probes fail when placed in line with
to prevent premature degradation. pumps and motors.
www.hannainst.com | 15.11
15
Specifications PCA310 PCA320 PCA330 PCA340
Range 0.00 to 5.00 mg/L (ppm) 0.00 to 5.00 mg/L (ppm) 0.00 to 5.00 mg/L (ppm) 0.00 to 5.00 mg/L (ppm)
Resolution 0.01 mg/L (ppm) 0.01 mg/L (ppm) 0.01 mg/L (ppm) 0.01 mg/L (ppm)
Range — — 0 to 2000 mV —
ORP Resolution — — 1 mV —
Accuracy — — ±1 mV —
Range — 5.0 to 75.0°C (41.0 to 167.0°F) 5.0 to 75.0°C (41.0 to 167.0°F) 5.0 to 75.0°C (41.0 to 167.0°F)
Recorder Output (1) 0-10 mV, 0-100 mV, 0-1 V, 4-20mA (2) 4-20mA
Additional System Error SPDT contact with 5A, 230V resistive load
analyzers
Specifications
0.07 to 4 bar with no external pressure regulator (for pressure exceeding four bar an external pressure
Sample Inlet Pressure
regulator is required)
Sample Inlet/Outlet
12mm (1/2”) male NPT fitting
Connection
Power Supply 115 VAC ±10% or 230 VAC ±10%; 50/60 Hz; 20 VA
Enclosure NEMA-4X standard, molded fiberglass polyester with transparent Lexan window
Dimensions / Weight 318 x 267 x 159 mm (12.5 x 10.5 x 6.25’’) / 5 kg (11 lb.) without reagents
Each PCA300 series model is supplied with reagent bottles (2), reagent caps (2), 1 DPD compound powder, tubing
and instructions.;
PCA310-1 Free & total chlorine PCA320-1 Free & total chlorine PCA330-1 Free & total chlorine PCA340-1 Free & total chlorine
analyzer/control (115V); analyzer/control, pH control, analyzer/control, pH control, ORP analyzer/control, pH control,
Ordering temperature (115V); monitoring, temperature (115V); temperature with dual analog
PCA310-2 Free & total chlorine
Information analyzer/control (230V); PCA320-2 Free & total chlorine PCA330-2 Free & total chlorine outputs (115V);
analyzer/control, pH control, analyzer/control, pH control, ORP PCA340-2 Free & total chlorine
temperature (230V) ; monitoring, temperature (230V) analyzer/control, pH control,
temperature with dual analog
outputs (230V)
15.12 | www.hannainst.com See page 15.15 for spare parts and solutions
15
Process Instrumentation
analyzers
Swimming Pools and Chlorine for Disinfection
In regards to swimming pool treatment, disinfection or sanitizing combined chlorines like di-chloramines. Beside this unpleasant odor,
basically means to rid the pool of bather contamination, destroy chloramines can irritate the eyes and the mucous membranes.
bacteria, and control nuisance organisms like algae, which may occur
in the pool, filtration equipment, and piping. Of the many techniques Commercial chlorine for disinfection may be available as a gas (Cl₂),
used (chlorine, bromine and iodine dosing systems), chlorine is the a liquid like sodium hypochlorite or bleach (NaOCl) or in a solid state
most common. like calcium hypochlorite, chloro-hydantoins or chloro-cyanuric
acid compounds. These compounds, once dissolved in water do
Chlorine establish equilibrium between the hypochlorous acid (HOCl) and
the hypochlorite ions (OCl¯). Although both forms are considered
Chlorine is a strong oxidizing agent that destroys mostly organic
free chlorine, it is the hypochlorous acid that provides the strongest
pollutants and bacteria and can combine with nitrogen containing
disinfecting and oxidising characteristic of chlorine solutions; the
compounds, forming chloramines. When dosing chlorine for
amount of hypochlorous acid in chlorinated water dependends upon
disinfection, only a portion of the dosed chlorine remains active to
the pH value of the solution. Changes in pH value will affect the HOCl
actually continue the disinfection process.
equilibrium in relation to the hydrogen and hypochlorite ion; HOCl
When free chlorine combines with a nitrogen containing compound it decreases and OCl¯ increases as pH increases. At a low pH, almost all
becomes a less efficient disinfectant called chloramines. The addition the free chlorine is in the molecular form HOCl and at a pH of around
of these two parts gives total chlorine. The target is to keep free 7.5, the ratio between HOCl and OCl¯ is 50:50. Since the ionic form OCl¯
and total chlorine equal, and thus to maintain the combined chlorine is a slow acting sanitizer while the molecular HOCl is a fast acting, it is
concentration chloramines) near zero. The presence of chloramines is important to regularly measure the pH. As a general rule a pH of about
not desired because of the distinctive ‘swimming pool’ smell caused by 7.2 is recommended to maintain fast acting disinfection conditions.
www.hannainst.com | 15.13
15 PCA Parts and Solutions
Process Instrumentation
Graphic display
with backlight
4 Peristaltic pump
for accurate
5 reagent dosage
6 12
17
8 Incoming
10 7
1 pressure
11 regulator
14
2
3
analyzers
Buffer and
indicator
reagents for
DPD method
13
15 16
15.14 | www.hannainst.com
PCA Parts and Solutions 15
Process Instrumentation
PCA peristaltic pump tubing kit (6). Each kit includes: non-
HI70474 Total chlorine reagent set for PCA, 500 mL (2)
transparent C-flex tubes 55L x 0.8ID mm (2.1 x 0.03’’) (5) HI70491
+ 5 poweder sachets (DPD)
PCA peristaltic pump tubing kit (2). Each kit includes: non-
HI70475 Free chlorine reagents set for PCA (the most stable),
transparent C-flex tubes 55L x 0.8ID mm (2.1 x 0.03’’) (5)
HI70430 recommended for long term measurements, 500 mL (2)
PCA reagent bottle tubing kit (6). Each kit includes: non- + 6 g powder
HI70476
transparent C-flex tubes 155L x 0.8ID mm (6.1 x 0.03’’) (11)
Free chlorine reagents set for PCA, recommended for short term
HI70480
PCA tubing set for measuring cell (2). Each set includes: measurements, 500 mL (2) + 5 sachets (DPD)
HI70477 non-transparent C-flex tube 50L x 0.8ID mm (2.0 x 0.03’’) (8)
HI70490 Free chlorine reagents set for PCA, 500 mL (2) + 5 sachets (DPD)
and Y strainer (7)
HI70452 DPD reagent,5 sachets
PCA tubing kit, bottle to pump (6 ). Each kit includes: non-
HI70478
transparent C-flex tube 150L x 0.8ID mm (5.9 x 0.03’’) (4)
Solutions
PCA tubing kit, pump to Y strainer (6 pcs). Each kit includes:
HI70479
non-transparent C-flex tube 150L x 0.8ID mm (5.9 x 0.03’’) (6) HI70460 Total chlorine indicator solution for PCA, 500 mL*
HI70482 PCA filters. The kit includes 0.5 µm and 50 µm filters (13) HI70461 Total chlorine buffer solution for PCA, 500 mL
HI70496 Replacement filter, 0.5 µm (15) HI70450 Free chlorine indicator solution for PCA, 500 mL*
HI70497 Replacement filter, 50 µm (16) HI70451 Free chlorine buffer solution for PCA, 500 mL
PCA complete tubing kit. The kit includes: non-transparent C-flex HI7004L pH 4.01 buffer solution, 500 mL
tubes (4, 6) 150L x 0.8ID (5.9 x 0.03’’) (4 pcs), non-transparent
HI7006L pH 6.86 buffer solution, 500 mL
HI70483 C-flex tubes (5) 55L x 0.8ID (2.1 x 0.03’’) (2 pcs), non-transparent
C-flex tubes (8) 50L x 0.8ID (2.0 x 0.03’’) HI7007L pH 7.01 buffer solution, 500 mL
and Y strainer (7)
HI7009L pH 9.18 buffer solution, 500 mL
PCA complete tubing kit (3). Each kit includes: non-transparent
HI7010L pH 10.01 buffer solution, 500 mL
C-flex tubes (4, 6) 150L x 0.8ID (5.9 x 0.03’’) (4 pcs),
HI70484 non-transparent C-flex tubes (5) 55L x 0.8ID (2.1 x 0.03’’) (2 pcs), HI7020L 200-275 mV buffer solution, 500 mL
non-transparent C-flex tubes (8) 50L x 0.8ID (2.0 x 0.03’’),
HI7091L Pretreatment reducing solution, 500 mL
Y strainer (7)
HI7092L Pretreatment oxidizing solution, 500 mL
HI70485 PCA stirrer motor
HI70300L Storage solution, 500 mL
HI70486 PCA stirring bar (2)
HI7082 3.5M KCL electrolyte, 30 mL
HI704871 Measuring cell (9)
analyzers
HI7061L Electrode cleaning solution, 500 mL
HI70488 Electrovalve, 24VAC/60Hz (12)
Electrodes
Amplified pH electrode with Matching Pin and Pt100 (14)
HI1005
(PCA320/330 only)
HI2008 Amplified ORP electrode with Matching Pin (17) (PCA330 only)
www.hannainst.com | 15.15
15
The BL120 and BL121 Swimming Pool Controller will show a decrease in ORP as the pH of the
is a complete system designed for maintaining water increases. The BL120 and BL121 utilize
swimming pool, hot tub, and spa disinfection a dosing consent feature that will not dose
water quality. These controllers are available in chlorine until the pH value is first corrected,
two configurations. The basic version is the in- since it is possible to have a low ORP value
line model which allows for direct installation even though there is sufficient chlorine. The
of probe and chemical injection fittings into dosing consent feature will prevent chemical
existing piping. A panel mounted version with wastage and having a higher chlorine
a bypass flow cell is also available. The bypass concentration level than desired.
flow cell allows for calibration and maintenance
of the probe without having to shut down the For compliance monitoring, BL120 and BL121
recirculation pump. have a built-in datalogger. Measurement
readings are logged every 10 seconds with a
The BL120 and BL121 use a multiparameter new log starting for each new day or when
controllers
digital HI1036-1802 probe that incorporates the instrument is calibrated. Logged data
pH, ORP, and temperature sensors along with include pH, ORP, and temperature values, last
a matching pin. All readings are measured calibration data, setup configuration, and any
within the probe and the data transferred to event data.
the controller by a digital connection. Both a
digital connection and matching pin provide For BL121 models, three 4-20 mA analog outputs
for stable, reliable measurements. Without are available for users that wish to connect
these two components, electrical noise to an external chart recorder or datalogger to
from recirculation pumps and ground loops monitor any of the three measured parameters.
can interfere, causing erratic readings and The outputs are scalable, offering increased
premature probe failure. flexibility and better resolution as needed.
These controllers have two built-in peristaltic Additional features of the BL121 include LED
chemical feed pumps that are proportionally indicators for dosing, meter status and service,
controlled with adjustable flow rates. One of real-time graph display, programmable alarms,
the pumps is used to dose acid while the other and password protection.
is used to dose chlorine. The effectiveness of
the available chlorine, as determined by ORP, These controllers are an all-in-one solution
is inversely related to the water’s pH value. for automatic control of pH and chlorine levels
A pool with a fixed concentration of chlorine in swimming pool, hot tub, and spa water.
15.16 | www.hannainst.com
15
Process Instrumentation
controllers
www.hannainst.com | 15.17
ORP (Chlorine) Dosing Consent
15 Both pH and ORP meters are commonly
used with swimming pools. With chlorine
disinfection there is an inverse relationship
between pH and ORP. As the pH level
increases, the ORP level decreases. The
BL120 and BL121 utilize a dosing consent
feature that will not dose chlorine until the
pH value is first corrected since it is possible
to have a low ORP value even though there
Process Instrumentation
in-line or a mechanical relay that is connected process errors experienced by the controller.
Automatic Proportional Pump to the recirculation pump power source to the
Control hold input of these controllers. With no flow or
when no power is applied to the recirculation
BL120 and BL121 feature proportionally
pump, the hold circuit will disable the dosing
controlled dosing pumps. Based on the
pumps. This will prevent any dosing of
sensitivity of the process to chemical addition,
chemical when there is no movement of
these controllers allow the user to adjust a
water in the system.
proportional band. This setting determines
the amount of time that the pumps are dosing
as a percentage of the deviation from the set
controllers
15.18 | www.hannainst.com
15
Process Instrumentation
controllers
www.hannainst.com | 15.19
Multiple Configurations
15 BL120 and BL121 swimming pool
controllers are available in one of two
configurations. The basic version is the
in-line model which allows for direct
installation of the probe and chemical
injection fittings into existing piping.
BL121-20
The HI1036-1802 is a digital combined probe The ORP and pH sensors and reference
that measures pH, ORP, and temperature. electrode use a differential measurement
This probe also incorporates a potential technique which is known to stay in service
matching pin. The matching pin is considered and provide accurate measurements
the “earth ground” connection and is used under adverse conditions that may cause
to prevent ground loop effects from causing conventional pH probes to produce erroneous
erratic readings and damage to the system. measurements. The HI1036-1802 probe with
its differential amplifiers greatly reduces
The pH glass has been chosen to produce inaccuracies caused by ground loops which
stable quick equilibration even in low may exist between process and instrument
conductivity waters. Additionally, the pH grounds. With the differential technique,
sensor is designed to produce a mV value near a ground loop current will flow through the
pH 4 (not pH 7 like typical pH sensors) should low impedance path of the matching pin thus
it stop working. A broken pH electrode that providing immunity to the measurement
produces a mV value near pH 7 would produce signals. Additionally the probe converts these
an alarm state and disable any pump activated. measurements to a digital signal to eliminate
noise and static due to high impedance
The ORP sensing surface is a large smooth signals carried by cable.
surfaced platinum band that encircles the
circumference of the temperature probe. It The HI1036-1802 with the BL120 or BL121
is referenced to Ag/AgCl reference electrode pool controller helps to promote the health
(3.5M KCl). and safety of pool and spa water.
15.20 | www.hannainst.com
15
Specifications BL120/BL121
Range 0.00 to 14.00 pH
Resolution 0.01 pH
Process Instrumentation
proportional with adjustable set point and proportional band; delay to start at power-on
pH Dosing
and overdosing protection
Range ±2000 mV
Resolution 1 mV
Accuracy (@25°C/77°F) ±5 mV
mV
ORP (mV) calibration one-point, manual input
proportional with adjustable set point and proportional band; delay to start at power-on
ORP Dosing
and overdosing protection; pH dosing interlocked
Pump Control automatic and manual modes; adjustable flow rate from 0.5 to 3.5 L/h
automatic logging of pH, ORP, and temperature measurements, GLP and events including alarms, errors and power
Log Feature
failure; capacity for 60 days with 10 second sampling interval; all data .csv files are transferred by USB flash drive
high and low with enable/disable option for all parameters; alarm is triggered when 5 consecutive readings are
Alarms
over/under threshold
Alarm System intuitive alert system based on LEDs; alarm filtering options; alarm relay control based on user setup
Password Protection setup, calibration and log recall options features are password protected
GLP pH/ORP calibration information including date and time for pH/ORP sensors
Additional
Alarm Relay Output (1) SPDT 5A/230 VAC; activated by pH/ORP/temperature selectable alarm conditions
Specifications
4 to 20 mA, sourcing, configurable; output impedance ≤ 500 Ohm; accuracy < 0.5 % FS;
BL121 Analog Outputs (3)
galvanically isolated up to 50 V relative to earth ground
Auxiliary Inputs (3) low level in acid/base tank (contact open); low level in chlorine tank (contact open); hold input (contact open)
controllers
galvanic isolated digital input HI1036-1802 pH/ORP/temperature/matching pin combined probe with DIN
Digital Probe Input (1)
waterproof connector
Power Consumption 10 VA
Dimensions 245 x 188 x 55 mm (73 mm with pumps); 9.6 x 7.4 x 2.2” (2.9” with pumps)
In-Line Configuration
BL120-10 pH/ORP/Temperature Pool Controller is supplied with HI1036-1802 pH/ORP/temperature digital probe with matching pin, 50 mm
probe saddle (1), fitting for probe, chemical injectors (2), 50 mm saddle for injectors (2), peristaltic tubing (2), 5 m of injection tubing, aspiration
filter (2), 20 ml sachets containing pH 7.01 buffer (3), 20 ml sachets containing pH 4.01 buffer (3), 250 ml bottle of 470 mV test solution, power
cable and instruction manual.
BL121-10 pH/ORP/Temperature Pool Controller with analog output is supplied with HI1036-1802 pH/ORP/temperature digital probe with
matching pin, 50 mm probe saddle (1), fitting for probe, chemical injectors (2), 50 mm saddle for injectors (2), peristaltic tubing (2), 5 m of
injection tubing, aspiration filter (2), 20 ml sachets containing pH 7.01 buffer (3), 20 ml sachets containing pH 4.01 buffer (3), 250 ml bottle
Ordering of 470 mV test solution, power cable and instruction manual.
Information User Panel Flow Cell Configuration
BL120-20 pH/ORP/temperature pool controller with flow cell is supplied with panel mounted flow cell, HI1036-1802 pH/ORP/temperature
digital probe with matching pin, 50 mm probe saddle (1), fitting for probe, chemical injectors (2), 50 mm saddle for injectors (2), peristaltic tubing
(2), 5 m of injection tubing, aspiration filter (2), 20 ml sachets containing pH 7.01 buffer (3), 20 ml sachets containing pH 4.01 buffer (3), 250 ml
bottle of 470 mV test solution, power cable and instruction manual.
BL121-20 pH/ORP/temperature pool controller with flow cell and analog output is supplied with panel mounted flow cell, HI1036-1802 pH/ORP/
temperature digital probe with matching pin, 50 mm probe saddle (1), fitting for probe, chemical injectors (2), 50 mm saddle for injectors (2),
peristaltic tubing (2), 5 m of injection tubing, aspiration filter (2), 20 ml sachets containing pH 7.01 buffer (3), 20 ml sachets containing pH 4.01
buffer (3), 250 ml bottle of 470 mV test solution, power cable and instruction manual.
Linear control
Linear control is the first solution to on/off control issues. Linear control
systems use linear negative feedback to produce a control signal
mathematically based on other variables, with a view to maintaining
the controlled process within an acceptable operating range. The
output from a linear control system into the controlled process may
be in the form of a directly variable signal, such as a motorized valve
that may be 0 or 100% open or anywhere in between. Sometimes this
is not feasible and so, after calculating the current required corrective
signal, a linear control system may repeatedly switch an actuator, such
as a pump, motor or heater, fully on and then fully off again, regulating
the duty cycle inside the time cycle using pulse-width modulation.
15.22 | www.hannainst.com
Process Instrumentation 15
Integral Action are activated to dose sulfuric acid to maintain the set point. Let’s
also assume that the process electrode becomes damaged and
The integral term magnifies the effect of long-term steady-state the pH bulb is broken. Under normal conditions, the electrode will
errors, applying ever-increasing effort until they reduce to zero. If the produce a potential equal to the difference between the buffer inside
actuator action being applied does not bring the controlled parameter the glass bulb (pH 7.0) and the liquid being tested (pH 3.0), i.e. pH
up to set point, for whatever reason, integral action increasingly
Process Instrumentation
(7.0-3.0) x approx. 59.16 mV = 236.64 mV (value not compensated
moves the proportional band relative to the set point until the error for temperature variations).
is reduced to zero and the set point is achieved.
Once the glass bulb is broken, a short circuit occurs between the
PID Tuning reference wire of the glass electrode (bulb) and the reference
electrode; as a result the complete electrode potential is 0 mV. When
PID control is a very powerful and high quality solution for many the instrument receives a 0 mV signal, it will read approximately pH
control processes. The biggest problem of PID controllers is the 7.0 and will immediately start to dose sulfuric acid in order to lower
tuning of the controller in accordance with the controlled system/ the pH level of the tank. If the controller does not possess a timed
parameter. Tuning control is not an easy operation and the controller override function to shut down automatically, the system will keep
and controlled system have to permit this. High level instruments dosing in an attempt to reach the 3.0 pH set point. This will continue
offer the auto-tuning of controllers that is oriented to the automation until the acid container becomes empty by which time the process
of the controller reaction and do not request common PID tuning. stream will be dangerously contaminated. Even if a timed override
is programmed into the controller, this will only limit the contamination.
Input of the Controllers If the electrode fails near to the set point, the controller could dose for
several minutes before the override shuts down the system.
Controllers are in contact with the process based on the sensors and
actuators. The sensors are the inputs of the controller, the actuators This is just one of many possible examples of overdosing and
are the outputs of the controller. In Hanna controllers, the common contamination as a result of an undetectable electrode failure.
inputs are the pH, ORP, conductivity, TDS along with temperature for
temperature compensation. The probes are connected directly to the In any given application, costly damage can be avoided by automatically
controller, or in case of extreme distances between controller and and continually monitoring the condition of the process sensors.
probe, through the transmitters (analog/digital). Hanna has devised such a system. The Sensor Check™ system
automatically checks the condition of the process electrode
every 5 seconds to ensure proper function.
Sensor Check™
A pH control system consists of a pH electrode in contact with a A pH glass electrode is a high impedance device (tens of MΩ at high
test solution, a connection cable, and a meter for measurements and temperatures, and up to 1,000 MΩ for temperatures close to zero).
adjustments. The instrument is typically set to control acid or alkaline The Sensor Check™ system repeatedly checks the impedance of
dosage for the purpose of maintaining a desired pH value. Many efforts the cable and electrode to ensure it does not fall below the average
controllers
have been devoted to such functions as dosage in pipes or tanks, on/ value of the system (at least 10 MΩ). If a lower value is detected,
off or proportional control, Automatic Temperature Compensation, indicating electrode failure, the instrument stops all dosage and
the use of amplifiers for distances exceeding 15 meters, panel or activates an alarm that alerts the operator. By doing so, the Sensor
Check™ system makes over dosage and contamination as a result of
wall-mounted models, etc. However, little effort has been applied to
electrode failure a thing of the past.
determining when and what occurs when an electrode fails.
Additionally, the Sensor Check™ system monitors the condition of
For example, let’s assume a process electrode is installed in a tank
the reference electrode. The pH measuring half cell may be intact
of wastewater containing hexavalent chromium. The set point pH
and work normally, but problems may occur related specifically to
value is 3.0 and, every time this value rises, pumps or solenoid valves
the reference portion of the electrode. The purpose of the reference
half cell portion of the electrode is to supply a consistent and stable
potential that is independent of the liquid being tested. This stable
Problems Detected by the potential is the reference value by which the measuring portion of the
Sensor Check™ System electrode is compared. As a result the potential difference between
the measuring half cell and the reference is the value used by the
instrument to produce the pH reading. The reference electrode must
make contact with the test solution to complete an electrochemical
connection. Unlike the measuring cell which is hermetically separated
by means of a glass bulb, the reference cell contains a permeable
membrane (reference junction) which allows electrolyte to diffuse into
the solution. This creates an ionic connection between the internal
silver reference and test solution, completing the circuit.
www.hannainst.com | 15.23
15 Process Instrumentation
longer reliable. In addition, exposure to dirt and particles in the process internal mass of the instrument. The instrument must be equipped
stream may clog the porous reference junction, isolating the reference electrically to perform this function. Hence, the matching pin can only
from the test liquid. If this occurs the electrochemical connection is be used with controllers provided with a differential input and circuit.
broken and the electrode is essentially “unplugged” from the test
solution making a correct pH reading impossible. This is why regular Few electrode and instrumentation manufacturers have paid the
Process Instrumentation
cleaning of the electrode system is a necessity. As with the pH bulb, necessary attention to the matching pin and as a result it has been up
the reference junction produces a measurable resistance value which
to the user to devise makeshift ground connections that may or may
under normal conditions is approximately 1,000Ω.
not work correctly.
The Hanna Sensor Check™ system monitors the reference junction
every 5 seconds to ensure that the proper resistance is maintained. Hanna has responded to this problem by designing a complete series
Users can program a maximum value for the resistance similar to of process electrodes, each equipped with an integrated potential
setting the pH set point. When the resistance of the clogged junction matching pin.
exceeds the set value, the instrument can stop dosage, trigger an
alarm or automatic cleaning cycle. These features are present in the Matching Pin: The Ground Loop Effect Solution
HI504 series of process pH/ORP controllers.
Both are essential for the cell to function and each has a specific
purpose. The entire cell is considered galvanic in that no external power
is supplied to the solution. In many respects, the electrochemical cell
is very much like a “wet cell” battery. In order for the measuring half
cell to produce a readable measurement of a test solution, it must be In process applications utilizing controllers and electrodes installed
compared to a stable reference potential. It is absolutely crucial that the in-line or in tank, the potential matching pin is considered the “earth
potential produced by the reference half cell is consistent and stable ground” connection and is used to prevent ground loop effects from
(approx. 210 mV) regardless of the properties of the test solution and
causing erratic readings and damage to the system. In fact, it is a
the working conditions. The only changing potential, as a result of the
grounding device with a pin made of a material (usually stainless steel
solution under test, is produced by the glass bulb of the measuring cell.
The reference electrode must also make contact with the test solution or titanium) inert to chemical attack. The matching pin essentially
to complete an electrochemical connection. Unlike the measuring cell redirects the current from the reference cell of the process electrode
controllers
which is hermetically separated by means of a glass bulb, the reference (i.e. pH or ORP sensor). Potentials and transient current flow can be
cell contains a permeable membrane (reference junction) which allows caused by “leakage” of improperly insulated electrical equipment
electrolyte to leach out into the solution. This creates an ionic connection (pumps and stirrers), electrostatic charges introduced by the motion
between the internal silver reference and test solution completing the of mixer blades, or the existence of electric fields (electrolysis) present
circuit. Hence the reference is now electrochemically connected to the
in plating baths.
solution which makes it vulnerable to transient electrical currents that
may be present in the process.
Calibration of a Typical Process Meter
Unlike with a portable battery powered pH meter and electrode, the
In industrial applications, the calibration of a meter often poses
process system is not isolated from potential difference and the
difficulties due to the distance between the electrode and the
resulting current flow. It is possible, given that unwanted potentials
exist in the process, that the silver/silver chloride wire of the reference instrument. In addition, accessing the electrode for calibration may
is exposed to current flow thousands of times higher than normal. In prove to be a challenge if it is installed in a pressurized line or large
theory, this should not happen since most process instruments are tank in a continuous process. Stopping a process frequently for the
powered at low voltage and the transformer inside the instrument purposes of regular calibration may prove inconvenient and costly.
will galvanically isolate the two potentials between the “process”
and ground of the electrical system. This depends, therefore, on the In laboratory applications, the task of calibration is significantly
quality of the instrument’s input transformer. Even with the best different because the electrode and the instrument are close
isolation, capacitance may be generated between the instrument and together and easily manageable. To provide the same level of
the process stream. In this case, the reference electrode influenced
manageability in a process application, Hanna has developed a
by the resulting EMF can no longer function properly and as a result,
remote calibration method which allows the maintenance technician
the pH reading is lost.
or operator the capability to calibrate the process controller without
By introducing the matching pin, which acts as a ground connection, having direct access to it or without removing the electrode from
the EMF is rerouted through the pin and galvanically isolated from the the installation.
15.24 | www.hannainst.com
Process Instrumentation 15
Analog or digital transmitters After the Hold mode expires, the meter exits the hold mode, but
control and alarms remain disabled for a user-selectable delay (0 to
In order to increase the distance between the sensor and the
99 seconds). In this situation, measurements are normally acquired,
controller, different solutions were implemented: to amplify the
displayed and recorded through the analog or RS485 output.
sensor signal, to transform the signal into another type of signal
in current or voltage using the analog transmitters, or to convert
Process Instrumentation
the signal from analog to digital and to transfer the reading in
Analog output
digital format. Based on this consideration Hanna supports all of these Hanna controllers feature settable analog outputs. The analog
solutions on the sensor level and input of the controllers. output can be linked to the measured input or to the output of the
PID controller. In the first case the analog output will be connected
Controller Output to a recorder and in the second case it will be used to drive external
devices such as actuators in a control system. A feature of the
As mentioned earlier, actuators are the outputs of the controllers.
recorder output configuration is the ability to zoom a specific
The output to actuators on the controller side can be performed
measurement range, to offer a higher resolution on the recorder
using a relay or analog output. Each of them is driven by the controller
output. Additionally, values that are out of the defined analog
in accordance with the control method used. For example, an on/off
output range can be used to signal the alarm condition that appears.
control is common to be performed with a relay, a linear control with
an analog output, and a duty cycle command using a solid state relay. The analog output is communally working in current and the standard
Hanna controllers feature all of these options. ranges are 0 to 20 mA or 4 to 20 mA. The measured range is divided
proportional with the analog output range. In some conditions the
Alarms and warning analog output can be set in voltage with commune ranges between
Controllers are designed to keep the controlled system/parameter 0 to 5V or 0 to 2V. The voltage is not commonly to be used for long
within a certain area of values. In the event that parameters have gone distances due to the drop in voltage on the connection and wires.
out of range, the controller signals an alarm on the user interface and
on an output such as an on/off relay according with the alarm status. Password protection
The status of the controller and the process can be monitored using the The controllers can be mounted to monitor and control important
analog output connected to a recorder or on the controller LCD. processes where unqualified personnel intervention is not accepted.
Hanna digital controllers feature a password protection solution that
Due to the complexity and importance of the controlled systems,
offers restricted access to important features like calibration, setup
the controllers incorporate a self-diagnostic feature. With this feature,
and consultancy of logged data. The password can be set and enabled/
the controller has the ability to check the most important functions,
disabled during the normal operations.
and in the event of failures, to take the actions that are necessary
to minimize the effects of the problems. Hanna controllers have
Panel Mount or Wall Mount Instruments
controllers
implemented both levels of protection: self-diagnostic and control of
output in the event of failures. Most process instruments for measuring and controlling pH, ORP
and conductivity are designed for installation in panel enclosures.
Hold feature Panel configurations are necessary when installing a variety of control
devices in a confined space.
The Hold feature suspends the measurement and control of functions
of the instrument. The control and control relays are also disabled.
Almost the entire range of Hanna panel mount instrumentation is
If the meter is in idle or control mode and displaying measurements,
available in stand alone wall mountable versions for quick and easy
then the last measured value (both for temperature and pH, ORP or
“plug and play” installation.
conductivity/concentration) is frozen on the display. The LCD displays
the “Hold” message.
The display will show dashes if the meter is put into the Hold mode
before any readings have taken place.
www.hannainst.com | 15.25
HI504
15 pH/ORP Digital
Controller
with Sensor Check™
• Sensor Check™
·· Tells the user if there is something
wrong with the electrode
• CAL Check™
Process Instrumentation
The temperature is continuously monitored using a temperature be caused by a prolonged exposure to an electric current. The types
sensor (Pt100 or Pt1000 type) with automatic temperature of problems identified by Sensor Check™ are: pH electrode broken,
compensation of pH. reference electrode dirty, reference electrode or matching pin not
immersed, clogged or dirty electrode junction, short-circuit between
One or two analog controller outputs (0-20 or 4-20 mA) can be cables of pH and reference electrodes, signal problems from the
configured for pH/ORP recording or controlling (only for models with cable or connector due to humid or dirty environments. The test is
PID), and relays can be used to control the process or be connected with not limited to a simple signal that indicates an error in progress, but
alarm status. it reports the nature of the problem with a specific error code.
Controller status is visable with LED’s on the front panel and on the
Programmable Cleaning Cycles
LCD display.
Heavy-duty applications often require almost continuous probe
The controllers logging feature can save up to 6000 samples pH/°C or maintenance. Elements such as suspended solids, fat, oils, pigments
ORP and last 100 error, configuration, calibration and cleaning events. and microorganisms can quickly deposit and soil the glass bulb of a
This information is accessible from a PC through RS485 and HI92500 pH probe, the sensor of an ORP probe or the reference junction. To
software. The powerful HI92500 software has graphing capabilities solve these problems, the HI504 series has been equipped with an
and can print graphs directly or can be saved as a bitmap. Data can be automatic cleaning system (simple or advanced, depending on model)
exported in common spreadsheet formats. with programmable cycles. The cleaning cycle is a simple wash with
either water or detergent, programmed by setting the rinse time
and the pause length. The advanced cleaning uses both water and
Analog Output: Data Logging or PID Dosage Control
detergent, and allows the user to program three stages, with the
Models are available with one or two analog outputs. These outputs can possibility to vary the sequence, the time, and the number of cycles.
be connected to a recorder for the catalogging of process data (pH/mV The advanced mode can also be triggered at any time from a remote
and temperature), or can be used for controlling dosing systems (pumps control or through the isolated digital input on the rear panel, which
or electrovalves) using PID control. can be connected to an external switch.
15.26 | www.hannainst.com
The controllers can also automatically activate both cleaning modes Fail Safe Alarm System
15
whenever Sensor Check™ reveals a soiled probe. A delay time can
be set before restarting the reading after a cleaning cycle has taken Hanna’s exclusive Fail Safe Alarm System protects against problems
place; this allows the probe to adjust to new operating conditions. caused by power supply failure or signal interruption, which are typical
risks in industrial environments. The system acts both on a hardware
Logging of the Last 100 Events and a software level. The alarm relay functions in a normally closed
With the HI504 series, it is possible to recall the sequence of the last condition, and is tripped when there is a power failure if, for example,
100 occurred events at any time: errors, calibrations performed, set the power cable is accidentally cut. This function is very important
parameter changes and cleaning cycles. Every code shown on the
in industrial plants where alarms are usually not activated if there is
display corresponds to a certain type of event, error, or operation.
a power supply interruption, which can cause serious damage due to
Process Instrumentation
a loss of control of the process plant. At the software level, the Fail
Programmable Hold System
Safe Alarm System function activates an alarm in case of abnormal
The hold function allows the user to stop the regulating action of the
circumstances, for example if the dosing contacts remain closed for
controller for programmable time periods. It is possible to activate the
hold periods in correspondence to programmed operations, such as an excessive period. The alarm condition is also indicated by a red LED,
plant maintenance and cleaning procedures. located directly on the front panel of the controller.
Specifications HI504
Range -2.00 to 16.00 pH; -2000 to 2000 mV; -30 to 130.0°C
Resolution 0.01 pH; 1 mV; 0.1°C (above -10 °C); 1°C (below -10°C)
Accuracy (@25°C/77°F) ±0.02 pH; ±2 mV; ±0.5°C (-9.9 to 130.0°C); ±1°C (-30 to -10°C)
Other Digital
two digital insulated inputs: one for hold and one for the advanced cleaning; ON state: 5 to 24 VDC
Insulated Inputs
Digital Insulated Output a digital insulated contact closed upon hold mode
Temperature Probe with three-wire or two-wire Pt100/Pt1000 sensor (with automatic recognition and damage test)
Power Supply
24 VDC/AC, 115 VAC ±10%, 230 VAC ±10% or 100 VAC ±10%; 50/60 Hz
(depending on model)
Power Consumption 10 VA
controllers
Max. Oscillation Frequency 8 MHz
Relays 1, 2, 3, 4 electromechanical relay SPDT contact outputs, 5A-250 VAC, 5A - 30 VDC (resistive load); fuse protected: 5A, 250V quick blow fuse
Alarm Relay electromechanical relay SPDT contact output, 5A - 250 VAC, 5A - 30 VDC (resistive load) fuse protected: 5A, 250V quick blow fuse
Each HI504 model is supplied complete with mounting brackets and instructions.
Choose your configuration
HI504222-1 dual setpoint, on/off and PID control, single analog output, 115V
HI504222-2 dual setpoint, on/off and PID control, single analog output, 230V
Ordering
HI504224-0 dual setpoint, on/off and PID control, dual analog output, 24VDC/AC
Information
HI504224-1 dual setpoint, on/off and PID control, dual analog output, 115V
HI504224-2 dual setpoint, on/off and PID control, dual analog output, 230V
HI504924-1 dual setpoint, advanced cleaning, on/off and PID control, dual analog output, 115V
HI504924-2 dual setpoint, advanced cleaning, on/off and PID control, dual analog output, 230V
HI7610 Stainless steel Pt100 probe with front and back 1/2” NPT thread and 5 m (16.4’) cable
Probes
HI7611 Glass Pt100 probe with front and back 1/2” NPT thread and 5 m (16.4’) cable
15 Conductivity
Process Digital
Controller
with Inductive Probe
• ATC
·· Automatic temperature compensation
Process Instrumentation
• Logging
·· Logging of up to 100 system events
controllers
HI720 Overview The controller logging feature can save the last 100 error,
configuration, calibration and cleaning events. This information
HI720 is a PID, PI, proportional or on/off EC/TDS controller with one or
two set points and includes an inductive conductivity probe. can be accessible from a PC through RS485 and HI92500 software.
The controller also has a full auto diagnostic procedure. A cleaning
The measurement configuration settings and EC and TDS control are procedure of the EC inductive probe is also available.
saved separately and permits users to switch between EC and TDS
without losing settings. TDS or a specific user defined curve can be
used for concentration. In-Line Cleaning
The cleaning feature allows an automatic cleaning action of the probe.
Temperature is continuously monitored using a temperature sensor
(Pt100 or Pt1000 type) with ATC of conductivity. Conductivity To perform cleaning, the controller activates an external device
temperature compensation parameters are fully customizable: linear (pump). Cleaning actions never take place if no relay is configured for
or non-linear temperature compensation, reference temperature cleaning. Cleaning can be of two types:
and temperature coefficient. Users can define the specific curve of
temperature compensation. 1. Simple cleaning: with water only, it can be triggered
only by a timer (periodical cleaning) or by an error
The working conductivity range is user selectable and the conductivity for which a cleaning action can be configured.
calibration in one point is performed in a value that corresponds to the
2. Advanced cleaning (optional): with water and
measurement range.
detergent, it can be triggered by the following events:
One or two analog controller outputs (0-20 or 4-20 mA) can be
Timer: Digital input or RS485 command (external trigger); Timer and
configured for recording or controlling (only for models with PID), and
digital input or RS485 command (external trigger); Timer masked by
up to 4 relays can be used to control the process or be connected with
alarm status. Controller status is visable with LED’s on the front panel the digital input (i.e. disabled when the digital input is on); Error for
and on LCD. which a cleaning action can be configured
15.28 | www.hannainst.com
15
Mechanical Dimensions Front View Side View
Process Instrumentation
Specifications HI720
Range 0 to 2000 mS/cm (autoranging); -30 to 130°C / -22 to 266°F
Resolution 1 µS/cm (0 to 1999 µS/cm); 0.01 mS/cm (2.00 to 19.99 mS/cm); 0.1 mS/cm (20.0 to 199.9 mS/cm); 1 mS/cm (200 to 2000 mS/cm); 0.1°C / 0.2°F
Temperature
automatic or manual, -30 to 130°C
Compensation
Temperature Probe three-wire or two-wire Pt100 or Pt1000 sensor with automatic recognition and damage test
Digital Output one digital insulated contact closed upon hold mode
controllers
Analog Output one or two independent outputs; 0-22 mA (configuring as 0-20 mA or 4-20 mA)
Dosing Relay 1, 2, 3 or 4 electromechanical relays SPDT; 5A-250 VAC, 5A-30 VDC (resistive load); fuse protected: 5A, 250 V fuse
Alarm Relay 1 electromechanical relay SPDT; 5A-250 VAC, 5A-30 VDC (resistive load); fuse protected: 5A, 250 V fuse
Installation Category II
Power supply
24 VDC/ac, or 115 VAC or 230 VAC or 100 VAC ±10%, 50/60 Hz; fuse protected: 400 mA, 250 V fast fuse
(depending on model)
Power Consumption 10 VA
Ordering HI720122-1 single setpoint, on/off and PID control, single analog output, 115V
Information HI720122-2 single setpoint, on/off and PID control, single analog output, 230V
HI720224-1 dual setpoint, on/off and PID control, dual analog output, 115V
HI720224-2 dual setpoint, on/off and PID control, dual analog output, 230V
HI7610 Stainless steel Pt100 probe with front and back 1/2” NPT thread and 5 m (16.4’) cable
HI7611 Glass Pt100 probe with front and back 1/2” NPT thread and 5 m (16.4’) cable
Probes
HI7620 Stainless steel Pt1000 probe with PG 13.5 thread and 5 m (16.4’) cable
EC Inductive Probe Theory of Operation The output current of this “receive coil” is therefore proportional to
the specific conductivity of process liquid.
This instrument allows conductivity measurements without
any electrical contact between electrodes and process fluid. For an inductive cell, the cell constant is defined as the measured
The measurement is based on inductive coupling of two toroidal conductivity, obtained by making a loop through the sensor with a
transformers by the liquid.
Process Instrumentation
15.30 | www.hannainst.com
pH502
pH Digital 15
Controllers
with Matching Pin and
PID Control
• ATC
·· Automatic temperature compensation
• 3 Point Calibration
Process Instrumentation
·· Up to three point calibration
Accuracy
±0.02 pH; ±0.5°C
(@25°C/77°F)
controllers
pH Calibration automatic, one, two or three point, at pH 4.01, 7.01, 10.01
Temperature
automatic (with Pt100 probe) or manual from -9.9 to 120°C
Compensation
one contact output SPDT, 5A-250 VAC, 5A-30 VDC (resistive load),
Alarm Relay
fuse protected (5A, 250V fuse)
Power Consumption 15 VA
Over Current
400 mA 250V fast fuse
Protection
Each pH 502 model is supplied complete with mounting brackets and instructions.
Choose your configuration
Ordering pH502421-1 Dual setpoint with SSR relay, on/off and PID controls,
Information analog output, 115V
pH502421-2 Dual setpoint with SSR relay, on/off and PID controls,
analog output, 230V
15 pH Digital
Controllers
with Matching Pin
• Alarm
·· Fail Safe Alarm System
• ATC
·· Automatic temperature compensation
Process Instrumentation
• 3 Point Calibration
·· Up to three point calibration
Each pH 500 model is supplied complete with mounting brackets and instructions.
Choose your configuration
pH500111-1 single setpoint, on/off control, analog output, 115V
pH500111-2 single setpoint, on/off control, analog output, 230V
pH500121-1 single setpoint, proportional control, analog output, 115V
ORP Digital 15
Controller
with Matching Pin
• Alarm
·· Fail Safe Alarm System
• ATC
·· Automatic temperature compensation
Process Instrumentation
• 2 Point Calibration
·· Up to two point calibration
• Connectivity
·· PC compatible
controllers
ORP Calibration automatic, two point, at 0 and 350 or 1900 mV functions make mV600 a great value.
digital: RS232 bi-directional optoisolated; or analog, galvanically isolated: 0-1 mA,
Outputs
0-20 mA and 4-20 mA, 0-5 VDC, 1-5 VDC and 0-10 VDC
Power Consumption 15 VA
Over Current
400 mA 250V fast fuse
Protection
Max. Oscillation
4 MHz
Frequency
Dimensions panel cutout: 140 x 140 mm, instrument: 144 x 144 x 170 mm
Each mV 600 model is supplied complete with mounting brackets and instructions.
Choose your configuration
15 Conductivity
and TDS Digital
Controllers
with Four-ring Potentiometric Probe
• ATC
·· Automatic temperature compensation
Process Instrumentation
• 2 Point Calibration
·· Up to two point calibration
• Backlight
·· Backlit, LCD display
includes all of the features of the HI700 and Temperature automatic or manual, -10 to 100°C with adjustable
adds TDS measurement. Compensation temperature coefficient from 0.00 to 10.00%/°C
analog: isolated 0-1 mA, 0-20 mA and 4-20 mA; 0-5 VDC,
Outputs 1-5 VDC and 0-10 VDC or digital: RS485 bi-directional
Additional opto-isolated
Specifications
Analog Input 4-20 mA
two contact outputs SPDT 5A-250 VAC, 5A-30 VDC
Set Point Relay
(resistive load), fuse protected (5A, 250V fast fuse)
contact output SPDT 5A-250 VAC, 5A-30 VDC (resistive
Alarm Relay
load), fuse protected (5A, 250V fast fuse
Power Supply 115 VAC ±10% or 230 VAC ±10%; 50/60 Hz
Power Consumption 15 VA
Over Current Protection 400 mA 250V fast fuse
Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing
Dimensions panel cutout: 140 x 140 mm, instrument: 144 x 144 x 170 mm
Weight 1.6 kg (3.5 lb.)
Each HI700 and HI710 model is supplied with mounting brackets and instructions.
Choose your configuration
HI700221-1 dual setpoint, on/off and PID controls, analog output, 115V
Ordering HI700221-2 dual setpoint, on/off and PID controls, analog output, 230V
Information HI710221-1 dual setpoint, on/off and PID controls, analog output, 115V
HI710221-2 dual setpoint, on/off and PID controls, analog output, 230V
HI710222-1 dual setpoint, on/off and PID controls, RS485 output, 115V
HI710222-2 dual setpoint, on/off and PID controls, RS485 output, 230V
Process Instrumentation
then a 4 to 20 mA transmitter should be used. The greater the distance
between the controller and the sample, the greater the chance you
have of line noise causing erroneous readings. Using a transmitter
greatly enhances the input signal, thus allowing high accuracy at
distances of up to 300 m (1000’).
Consent Feature
The consent contact allows you to be sure that the ORP dosing occurs
only when the pH value is correct. This assures that the pH is within
a specified range before any dosing of oxidizing or reducing agents
occurs. This will prevent any overdosing of chemicals, a very important
cost-effective feature in many applications, especially in pools, spas
and hot tubs.
Quality Construction
Panel Mounted Controllers The controllers are housed in sturdy aluminum casings with ABS
Hanna panel mounted pH, ORP and conductivity controllers are plastic front panels. The mounting brackets that are supplied with
designed to meet your most demanding process control requirements. the meter, can be installed securely and quickly. When in operation,
Our controllers come equipped with a relay operating at a maximum and with the transparent protective cover installed, the units comply
of 2 A (240V). Where a direct electrode input is not suitable, the with IP42 standards (see chart in section 20 for IP codes). The use
controller is available with a 4-20 mA input from a transmitter. This of this design protects the unit from the conditions associated with
feature greatly improves the safety of your instrumentation and industrial environments, ensuring a long and trouble-free operation.
plant. Accurate measurements are displayed on a large LCD, enabling
the operator to check the controller readings easily. These units LED Indicators
have sophisticated, built-in, self-diagnostic functions that allow
The LEDs on the front panel light up to indicate the current operational
the operator to check whether a malfunction has originated in the
mode. The LEDs also blink at different rates to indicate multiple modes
instrument itself, or in the outside connection (electrode, transmitter
controllers
occurring simultaneously. This feature allows the user to evaluate the
or cables). This saves valuable time and money, particularly in the
controller from a distance and clearly read which mode it is in.
monitoring of critical processes. In the event of a malfunction, the
operator can determine the origin and rectify the situation before
any costly errors occur. This Self-Diagnostic Error Prevention System
makes these process instruments superior to conventional controllers.
Alarm Feature
Hanna controllers incorporate an alarm warning system. When the
measured value of the meter is out of the user-specified range,
the alarm is activated. When activated, the alarm contacts close,
triggering the mechanism of your choice, whether a buzzer, light or
any other electrical connection. The alarm feature is a necessity when
the installation is in a remote location and corrective action must be
taken immediately in the event of an out of range condition.
Recorder Output
The ability to record data from the process you are monitoring greatly
enhances process troubleshooting. By simply connecting a recorder to
the controller’s output terminals (choose between 0 to 20 mA or 4 to
20 mA according to your needs), users are able to acquire a hard copy
for demonstrative or analytical purposes.
www.hannainst.com | 15.35
15 Mechanical Dimensions for Panel Mounting
Process Instrumentation
15.36 | www.hannainst.com
HI8510
pH Analog Indicator 15
with Self Diagnostic Test
• ATC
·· Automatic temperature
compensation Backlight
• Backlit, LCD display
Process Instrumentation
HI8510 is ideal for monitoring pH in process
control. It can provide highly accurate pH
measurements and display values on the
easy to read LCD. BNC input, amplified
probe input and input from transmitter are
supported.
Specifications HI8510
Range 0.00 to 14.00 pH
controllers
Resolution 0.01 pH
Accuracy
±0.02 pH (0 to 100 °C); ±0.05 pH (-20 to 0 °C); ±0.5% (input transmitter)
(@25°C/77°F)
Input high impedance 10¹² Ohm; reference and matching pin inputs are available; 4-20 mA
Calibration offset: ±2 pH with OFFSET trimmer; slope: 80 to 110% with SLOPE trimmer
Temperature
fixed or automatic with Pt100, from -20 to 100°C (-4 to 212°F)
Compensation
Backlight continuous on
Enclosure flame retardant ABS body and front panel; transparent splash-proof front cover
Ordering
The HI8510 is supplied complete with mounting brackets and instructions.
Information
HI8427 pH / ORP electrode simulator
15 pH Analog
Controller
with Self-Diagnostic Test
• Alarm
·· 0.2 to 3.00 pH alarm tolerance range
• ATC
·· Automatic temperature compensation
Process Instrumentation
• Backlight
·· Backlit, LCD display
Accuracy (@25°C/77°F) ±0.02 pH (0 to 100 °C); ±0.05 pH (-20 to 0 °C); ±0.5% (input from transmitter)
A removable, transparent splash-proof cover
Input high impedance 10¹² Ohm; reference and matching pin inputs are available 4-20 mA
protects the front panel.
Power Output ±5 Vcc; 150 mA max load for amplified electrodes
* ORP dosing consent device Calibration offset: ±2 pH with OFFSET trimmer; slope: 80 to 110% with SLOPE trimmer
Temperature
fixed or automatic with Pt100, from -20 to 100°C (-4 to 212°F)
controllers
Compensation
Set Point Relay 1, isolated, 2 A, max 240 V, resistive load, 1000000 strokes (not fuse protected)
Alarm Relay 1, isolated, 2 A, max 240 V, resistive load, 1000000 strokes (not fuse protected)
Consent Relay 1, isolated, 2 A, max 240 V, resistive load, 1000000 strokes (not fuse protected)
Over Dosing Control adjustable, from 5 min to 60 min with knob or disable by wire strap - on rear panel
Backlight continuous on
Enclosure flame retardant ABS body and front panel; transparent splash-proof front cover
Ordering
The HI8710 is supplied complete with mounting brackets and instructions.
Information
HI8427 pH / ORP electrode simulator
pH Analog 15
Controller
with Dual Output and
Self-Diagnostic Test
• Alarm
·· 0.2 to 3.00 pH alarm tolerance range
• ATC
Process Instrumentation
·· Automatic temperature compensation
• Backlight
·· Backlit, LCD display
Input high impedance 10¹² Ohm; reference and matching pin inputs are available; 4-20 mA
A removable, transparent splash-proof cover
Power Output ±5 Vcc; 150 mA max load for amplified electrodes protects the front panel.
Calibration offset: ±2 pH with OFFSET trimmer; slope: 80 to 110% with SLOPE trimmer
controllers
Temperature
fixed or automatic with Pt100, from -20 to 100°C (-4 to 212°F)
Compensation
Set Point Relay 2, isolated, 2 A, max 240 V, resistive load, 1000000 strokes (not fuse protected)
Set Point Range alk. set: from 0.00 to 14.00 pH; acid set: from 0.00 to 14.00 pH
Alarm Relay 1, isolated, 2 A, max 240 V, resistive load, 1000000 strokes (not fuse protected)
Over Dosing Control adjustable, from 5 min to 60 min with knob or disable by wire strap - on rear panel
Backlight continuous on
Enclosure flame retardant ABS body and front panel; transparent splash-proof front cover
Ordering
The HI8711 is supplied complete with mounting brackets and instructions.
Information
HI8427 pH / ORP electrode simulator
15 ORP Analog
Controller
with Self-Diagnostic Test
• Alarm
·· 10 to 300 mV alarm tolerance range
• Backlight
·· Backlit, LCD display
Process Instrumentation
Input high impedance 10¹² Ohm; reference and matching pin inputs are available; 4-20 mA
Set Point Relay 1, isolated, 2 A, max 240 V, resistive load, 1000000 strokes (not fuse protected)
Alarm Relay 1, isolated, 2 A, max 240 V, resistive load, 1000000 strokes (not fuse protected)
Over Dosing Control adjustable, from 5 min to 60 min with knob or disable by wire strap - on rear panel
Backlight continuous on
Enclosure flame retardant ABS body and front panel; transparent splash-proof front cover
Ordering
The HI8720 is supplied complete with mounting brackets and instructions.
Information
HI8427 pH / ORP electrode simulator
15
HI8931CN · HI8931DN
EC Analog
Controller
with Input from Probe or Transmitter
• ATC
·· Automatic temperature compensation
• Backlight
Process Instrumentation
·· Backlit, LCD display
Accuracy ±2% F.S. (excluding ±2% F.S. (excluding ±2% F.S. (excluding ±2% F.S. (excluding
controllers
(@25°C/77°F) probe error) probe error) probe error) probe error)
Set Point Range 0.0 to 199.9 mS/cm 0.00 to 19.99 mS/cm 0 to 1999 µS/cm 0.0 to 199.9 µS/cm
Alarm Range 0.0 mS and 100.0 mS 0.00 mS and 10.00 mS 0 µS and 1000 µS 0.0 µS and 100.0 µS
Temp. Compensation automatic, 0 to 60°C with β=2%/°C; see also transmitter HI8936
Conductivity Probe HI7635 for in-line applications or HI3001D for flow-thru (not included)
Over Dosing Control adjustable, from 5 min to 60 min with knob or disable by wire strap - on rear panel
Backlight continuous on
Enclosure flame retardant ABS body and front panel; transparent splash-proof front cover
Ordering
The HI8931 series is supplied with mounting brackets and instructions.
Information
15
HI943500C · HI943500D
EC Analog
Controller
with Direct Input from Potentiometric
Probe
• ATC
·· Automatic temperature compensation
Process Instrumentation
• Backlight
·· Backlit, LCD display
Accuracy
±2% F.S.
(@25°C/77°F)
Temperature
automatic, 0 to 60°C (32 to 140°F), with β=2%/°C
Compensation
Set Point Relay 1, isolated, 2A, max. 240 V, resistive load, 1,000,000 strokes
Alarm Relay 1, isolated, 2A, max. 240 V, resistive load, 1,000,000 strokes
Enclosure flame retardant ABS body and front panel; transparent splash-proof front cover
Ordering
The HI943500 series is supplied complete with mounting brackets and instructions.
Information
PEI/glass body, 75 mm conductivity probe with internal
HI7638
temperature sensor and 3/8” NPT thread (immersion)
Dissolved Oxygen 15
Controller
with Extended Range and Analog
Output
• Alarm
·· 0.5 to 5.0 mg/L (ppm) O₂ alarm range
• ATC
Process Instrumentation
·· Automatic temperature compensation
controllers
Salinity Compensation 0 to 51 g/L (resolution 1 g/L) ”Automatic/Off/manual” dosing selection
Probe (not included) HI76410/4 with 4 m (13.1’) cable or HI76410/10 with 10 m (32.8’) cable switch and LED on the front panel. In Automatic
Recorder Output 0 to 20 mA or 4 to 20 mA (isolated)
mode all the relays are controlled based on
the measurement set point and alarm values.
Set point and Alarm Relay 1, isolated, 2A, max. 240V, resistive load, 1,000,000 strokes
In OFF mode, the dosing and alarm relays are
Set point Range 5 to 600 % O₂; 0.5 to 50.0 mg/L (ppm) O₂ always deactivated. In ON (Manual) mode,
Alarm Range 0.5 to 5.0 mg/L (ppm) O₂ the dosing relay is always on. The alarm relay
Hysteresis Range 0.5 to 2.4 mg/L (ppm) O₂ is still enabled. If an alarm occurs the dosing
Dosing Control OFF/AUTO/ON with selection switch
relay remains activated. If the over dose time
exceeds the setting during manual mode, the
Over Dosing Control adjustable, from 5 min to 60 min with knob or disable by wire strap - on rear panel
alarm relay remains activated.
Backlight continuous on
Power Supply 115 VAC ±10% or 230 VAC ±10%; 50/60 Hz The D.O. probe is provided with a membrane
Enclosure flame retardant ABS body and front panel; transparent splash-proof front cover covering the galvanic sensor and a built-in
thermistor for temperature measurement
Environment -10 to 50°C (14 to 122°F); RH max 95% non-conndensing
and compensation.
Panel Cutout 141 x 69 mm (5.6 x 2.7’’)
Ordering
The HI8410 is supplied complete with mounting brackets and instructions.
Information
Galvanic DO probe (fixed) with internal temperature sensor,
HI76410/4
DIN connector and 4 m (13.1’) cable
Probes
Galvanic DO probe (fixed) with internal temperature sensor,
HI76410/10
DINconnector and 10 m (32.8’) cable
be cost effectively
monitored 24/7
BL mini controllers are the perfect solution for water analysis and control
down activation in cooling towers and water management. In these
pH Mini Controllers
applications, high conductivity will cause scaling and corrosion of piping
Monitoring and controlling pH in water conditioning and industrial and damage to critical components.
applications is essential for water quality and maintaining
infrastructure (piping and equipment). In the case of industrial effluent,
neutralization of acidic waste is vital for environmental safety and
TDS Mini Controllers
public health. In boiler feed water conditioning, a pH of 8.5 is necessary A TDS (total dissolved solids) measurement is an important indicator of
to prevent scaling and corrosion of critical components. Maintaining water quality. An increase in TDS indicates an increase in the amount of
a pH of 7.4 is fundamental for proper and efficient sanitization in dissolved solids (salts) present in the water. TDS monitoring and control
controllers
swimming pools and spas. The efficacy of sanitizers, such as chlorine, is imperative in industrial applications such as feed water control, blow
is dependent on a controlled pH value. down activation in cooling towers and water management. In these
applications, high TDS will cause scaling and corrosion of piping and
ORP Mini Controllers damage to critical components.
15.44 | www.hannainst.com
Hanna Mini Controllers 15
BL Series Mechanical Dimensions
Process Instrumentation
Side View
Side view of panel-mounted controllers.
controllers
www.hannainst.com | 15.45
BL981411
15 pH Mini Controller
• Easy to handle
• Fire-retardant casing
• Selectable overdose protection system
• Splash-resistant cover
Process Instrumentation
Specifications BL981411
Range 0.0 to 14.0 pH
Resolution 0.1 pH
Accuracy
±0.2 pH
(@25°C/77°F)
acid or alkaline
Dosing Selection contact open=acid dosage=relay ON if measurement > setpoint
contact closed=alkaline dosage=relay ON if measurement < setpoint
Ordering BL981411-0 (12 VDC) and BL981411-1 (115/230V) are supplied with mounting
Information brackets, transparent cover and instruction manual.
Recommended HI1001 PVDF body pH electrode with 1/2” NPT thread, BNC connector and 3 m (9.8’)
Probe cable for continuous flow-thru monitoring (not included).
pH Mini Controller 15
with 4-20 mA Recorder Output
• Easy-to-handle
• Fire-retardant casing
• Selectable overdose protection system
• Splash-resistant cover
Process Instrumentation
The BL931700 mini pH controller has been
designed for easy, affordable installation in
tight spaces to perform simple, yet effective
process control. Thanks to its compact size,
BL931700 can be installed right next to tanks
or vats.
controllers
In addition, this model features a 4-20 mA
Range 0.00 to 14.00 pH
analog output for recorder connection.
Resolution 0.01 pH
Accuracy
±0.02 pH
(@25°C/77°F)
acid or alkaline
Dosing Selection contact open=acid dosage=relay ON if measurement > setpoint
contact closed=alkaline dosage=relay ON if measurement < setpoint
Ordering BL931700-0 (12 VDC) and BL931700-1 ( 115/230V) are supplied with mounting
Information brackets, transparent cover and instruction manual.
Recommended HI1001 PVDF body pH electrode with 1/2” NPT thread, BNC connector
Probe and 3 m (9.8’) cable for continuous flow-thru monitoring (not included).
Specifications BL982411
Range 0 to 1000 mV
Resolution 1 mV
Accuracy
±5 mV
(@25°C/77°F)
Ordering BL982411-0 (12 VDC) and BL982411-1 ( 115/230V) are supplied with mounting
Information brackets, transparent cover and instruction manual.
Recommended HI2001 PVDF body ORPelectrode with 1/2” NPT thread, BNC connector and 3 m (9.8’)
Probe cable for continuous flow-thru monitoring (not included).
• Easy to handle
• Fire-retardant casing
• Selectable overdose protection system
• Splash-resistant cover
Process Instrumentation
The BL932700 is an ORP mini controller
that has been designed for easy, affordable
installation in tight spaces, ideal for simple
yet effective process control. As a result of its
compact size, the BL932700 can be installed
right next to tanks or vats.
controllers
Range ±1000 mV model features a 4-20 mA analog output for
recorder connection.
Resolution 1 mV
Accuracy
±5 mV
(@25°C/77°F)
Ordering BL932700-0 (12 VDC) and BL932700-1 ( 115/230V) are supplied with mounting
Information brackets, transparent cover and instruction manual.
Recommended HI2001 PVDF body ORPelectrode with 1/2” NPT thread, BNC connector and 3 m (9.8’)
Probe cable for continuous flow-thru monitoring (not included).
15 EC Mini Controllers
Measuring in µS/cm
• Adjustable setpoint
• Fire-retardant casing
• Selectable overdose protection system
• Splash-resistant cover
Process Instrumentation
Accuracy
±2% F.S. ±2% F.S. ±2% F.S.
(@25°C/77°F)
Temperature
automatic from 5 to 50°C (41 to 122°F) with β =2%/ºC
Compensation
EC Mini Controllers 15
Measuring in mS/cm
• Fire-retardant casing
• Selectable overdose protection system
• Splash-resistant cover
Process Instrumentation
The BL983317 and BL983327 are panel-
mounted mini controllers with output relays
that have been designed for easy, affordable
installation in tight spaces, ideal for simple
yet effective process control.
controllers
Specifications BL983317 BL983327
Range 0.00 to 10.00 mS/cm
Accuracy
±2% F.S.
(@25°C/77°F)
Temperature
automatic from 5 to 50°C (41 to 122°F) with β =2%/ºC
Compensation
15
BL983321 • BL983329
Resolution 0.1 mg/L (ppm) 1 mg/L (ppm) 0.01 mg/L (ppm) 1 mg/L (ppm)
Accuracy (@25°C/77°F) ±2% F.S. ±2% F.S. ±2% F.S. ±2% F.S.
maximum 2A (fuse protected), 250 Vac, 30 VDC Contact close when measure:
Dosing Relay
> setpoint < setpoint > setpoint > setpoint
Temperature
automatic from 5 to 50°C (41 to 122°F) with β =2%/ºC
Compensation
• Fire-retardant casing
• Selectable overdose protection system
• Splash-resistant cover
Process Instrumentation
The BL983318 is a mini controller that
has been designed for easy, affordable
installation in tight spaces, ideal for simple
yet effective process control.
controllers
Specifications BL983318
Range 0.00 to 10.00 g/L (ppt)
Accuracy
±2% F.S.
(@25°C/77°F)
Temperature
automatic from 5 to 50°C (41 to 122°F) with β=2%/ºC
Compensation
Ordering BL983318-0 (12 VDC) and BL983318-1 ( 115/230V) are supplied with mounting
Information brackets, transparent cover and instruction manual.
Specifications BL983324
Range 0.0 to 49.9 mg/L (ppm)
Accuracy
±2% F.S.
(@25°C/77°F)
Ordering BL983324-0 (12 VDC) and BL983324-1 ( 115/230V) are supplied with
Information mounting brackets, transparent cover and instruction manual.
Resistivity Mini 15
Controllers
• Fire-retardant casing
• Selectable overdose protection system
• Splash-resistant cover
Process Instrumentation
The BL983314 is a simple to operate
resistivity controller designed for ultra
pure water, reverse osmosis, and water
conditioning applications. The BL983314
resistivity controller is also ideal for
continuous monitoring of process solutions.
Setpoint and calibration are manually
adjusted with a trimmer and the alarm relay
allows for simple control.
controllers
because it permits operators to enable or
Range 0.00 to 19.90 MΩ•cm
disable the dosing relay according to need.
Resolution 0.10 MΩ•cm
Ordering BL983314-0 (12 VDC) and BL983314-1 ( 115/230V) are supplied with mounting
Information brackets, transparent cover and instruction manual.
Recommended
HI3314 resistivity probe with 2 m (6.6’) cable (included)
Probe
www.hannainst.com | 15.55
HI7871 • HI7873
15 Mini Level
Controllers
The HI7871 and HI7873 mini level controllers
are ideal for liquid level control over distances
of up to 100 m (330’). These instruments are
highly compact and will fit in tight spaces.
*HI7871 requires 3 bars, one each for low and high levels and the third as a consent sensor.
**HI7873 requires 4 bars with the additional bar used for overflow measurement.
15.56 | www.hannainst.com
HI7874
Level Transmitter 15
Accurate level control is critical to many
industrial applications, especially for process
adjustments using aggressive chemicals. Our
sensor bars are built with stainless steel for
long life, even in harsh conditions. These
transmitters are easy to install and ideal for
monitoring tanks and water conditioning
plants.
Process Instrumentation
The HI7874 transmitter was designed in
conjunction with the HI7871 and HI7873 level
controllers. The transmitter is housed in a
durable and waterproof ABS body and allows
the user to easily adjust the length of the
sensor bars according to the specific need.
controllers
HI7874
Level Transmitter with HI731324
Stainless Steel Measuring Bars
Specifications HI7874
Transmission max 100 m (330’)
www.hannainst.com | 15.57
15 MEADOS pH and ORP Measuring
and Dosing System
by Hanna
Two Advanced Instruments in One Alarm Output
MEADOS pumps combine the powerful Blackstone dosing pumps When monitoring and controlling pH and ORP levels in a process, it is
with Hanna pH/ORP controllers. This latest innovation eliminates very important that any potential problem does not go unattended.
the need for multiple units by combining a pH controller and chemical The Hanna MEADOS units incorporate an alarm system that will alert
feed pump into one. No more complicated installations, wiring the user if the reaction is not within certain guidelines. The alarm of
Process Instrumentation
and compatibility problems. This compact unit features accurate the BL7916 will be activated if the measured pH value is 2 pH units
regulation, proportional dosing, alarm and recorder signals and much lower than the set point (if dosing acid, this indicates overdosage, a
more, all in one meter. common symptom of siphoning). The alarm will also activate if the value
is 2 pH higher than the set point (if dosing acid, this is an indication of
Easy Installation insufficient dosage, a common symptom of the lack of chemicals). The
BL7917’s alarm will activate if the mV value is 200 mV lower than the
Designed with mounting holes built into a rugged base, Blackstone set point (if dosing reducing chemicals, this indicates overdosage). The
pump/controllers are simple to install. They use a standard pH probe alarm will also activate if the value is 200 mV higher than the set point
with a BNC connector to eliminate the need for any additional (if dosing reducing chemicals, this is an indication of lack of chemicals).
hardware. All of the controls and pump assemblies are conveniently
located on the front of the unit. There is no need to uninstall the unit
to access the pump head or control panel.
Auxiliary Dosing Contacts
The auxiliary dosing contacts of the MEADOS units are closed
Rugged Construction whenever the pump is dosing. This solution offers considerable
advantages, especially for small plants, where these pumps need to be
Blackstone pump/controllers are housed in rugged, fiber-reinforced the only equipment left running. This will spare other equipment such
polypropylene IP55 rated casings to prevent the ingress of liquids. as mixers, priming pumps etc. With this feature activated, a mixer can
The material used for the housing resists corrosion caused by most be automatically started, when the pump is dosing.
chemicals, protecting the unit from hazardous spills and splashes.
Superior Materials
Blackstone pumps use PVDF, FPM/FKM and PTFE materials for all
components in contact with the chemicals being dosed. These
materials have properties which enable them to resist even the most
corrosive chemicals in the industry. The chemical resistance chart
on page 17.54 shows how well PVDF, FPM/FKM and PTFE resist the
harmful effects of different products.
controllers
Front View
Proportional Dosing This series of instruments will mount easily in your plant using a minimum of wall
space. The controls and pump head are located in the front to allow easy access.
The Blackstone controller/pump strokes at full capacity when the
measured value deviates by more than 1.5 pH or 150 mV from the
set value. A proportional control slows down the stroke rate as the
measured value approaches the user selectable set points, avoiding
overdosage of chemicals. This feature makes the pump’s dosing more
accurate, saves chemicals and eliminates unnecessary and costly
corrections to your process, especially with slow reacting chemicals.
15.58 | www.hannainst.com
BL7916
pH Controller and 15
Pump
by Hanna
• pH controller and dosing pump
• ±0.01 pH accuracy
• Isolated 4 to 20 mA recorder output.
• Proportional dosing
·· Slows the pump down when the
Process Instrumentation
measured pH level approaches the
set value, which ensures precise
dosage and avoids costly waste of
chemicals due to overdosage.
• Alarm contact
·· Activated whenever the pH value varies
more than 2 pH units from the set point.
• Auxiliary contacts
·· Allow the user to attach a mixer
or priming pump that is activated
only when the pump is dosing.
• PVDF, FPM/FKM and PTFE materials
·· Used for all parts that come
into contact with liquid.
controllers
Specifications BL7916
Range 0.00 to 14.00 pH
Resolution 0.01 pH
Dosing Contact 1 isolated, 2A, max. 240V, resistive load, 1,000,000 strokes
Alarm Contact 1 isolated, 2A, max. 240V, resistive load, 1,000,000 strokes
15 ORP Controller
and Pump
by Hanna
• ORP controller and dosing pumps
• ±5 mV accuracy
• Isolated 4 to 20 mA recorder output.
• Proportional dosing
·· Slows the pump down when the
Process Instrumentation
Specifications BL7917
Range -999 mV to +999 mV
Resolution 1 mV
Accuracy (@20°C/68°F) ±5 mV
Dosing Contact 1 isolated, 2A, max. 240V, resistive load, 1,000,000 strokes
Alarm Contact 1 isolated, 2A, max. 240V, resistive load, 1,000,000 strokes
Process Instrumentation
sample, the greater the chance that line noise will occur, causing faulty
readings. Use an AmpHel® pH electrode (available also with external
battery) to greatly enhance the input signal allowing high accuracy at
distances of up to 50 m (165’).
Quality Construction
These controllers are housed in a rugged, modular, fiber-reinforced
polypropylene housing. Polypropylene has properties that will resist
the harmful effects of most chemicals. When in operation, and with
the transparent protective cover installed, the units comply with the
IP54 standards. The modular design isolates the controller circuitry
from all contacts, assuring that there is no noise interference. The
use of this rugged design protects the unit from the tough conditions
associated with industrial environments, ensuring long periods of
trouble-free operation.
controllers
check the controller readings easily.
Alarm Feature
The Hanna wall mounted series of controllers incorporate a triple
contact alarm system that allows the user to select whether the
alarm contacts will be in a normally open or normally closed position.
When the measured value of the meter is out of range, the alarm is
activated. The alarm will also be activated if the unit loses power.
When activated, the alarm contacts will open or close, triggering
the mechanism of your choice, whether a buzzer, light or any other
electrical device. The alarm is a necessity when the installation is in
a remote location and corrective action must be taken immediately
in the event of an out of range condition.
www.hannainst.com | 15.61
15 Wall-Mounted Process Controllers
Password Protection
The Hanna password protection feature keeps these controllers safe
from tampering. Only users with the proper password can change the
settings of these controllers.
Simple Installation
These wall mounted controllers have mounting holes molded into the
housing to assure simple, quick and secure installation without the
need for additional hardware. Once all electrical connections are made,
the protective cover can be installed over the front panel, making it
possible to perform all adjustments without disassembling any part of
the unit. Temperature probes can also be installed. Pumps to be used
in conjunction with the controller simply plug into the controller’s input
and will be powered up through the unit’s internal power supply.
Simple to Use
The large, dual-level LCD shows both primary measurement and Mechanical Dimensions
temperature and guides operators through calibration and
programming with step-by-step prompts. The choice of ON/OFF, The modular design isolates electrical connections in a closed
proportional and PID control provides extra versatility and makes it compartment, while the control settings are accessible and can be
possible to pick the process controller that best fits your application. made through the adjacent compartment.
Keeping track of multiple controllers in different plants is made easy.
These advanced controllers can be identified with both a factory Front View
15.62 | www.hannainst.com
HI21
Industrial Grade pH 15
Digital Controllers
Wall Mounted with Matching Pin
• Alarm
·· Fail Safe Alarm System
• ATC
·· Automatic temperature compensation
Process Instrumentation
• 3 Point Calibration
·· Up to three point calibration at
controllers
0 and 14 pH can be chosen to correspond
pH Calibration automatic, one, two or three point, at pH 4.01, 7.01, 10.01
to the analog output spans. HI21 models
Temperature
automatic (with Pt100 probe) or manual from -9.9 to 120°C
are equipped with a bi-directional RS485
Compensation port, which allows remote control of the
Analog Output 0 to 1 mA, 0 to 20 mA, 4 to 20 mA; 0 to 5 VDC, 1 to 5 VDC, 0 to 10 VDC instrument from a PC.
Digital Output RS485
Power Consumption 15 VA
Protection IP 54
15 Industrial Grade
ORP Digital
Controllers
Wall Mounted with Matching Pin
• Alarm
·· Fail Safe Alarm System
Process Instrumentation
• Connectivity
·· PC compatible
Industrial Grade EC 15
Digital Controllers
Wall Mounted with Four-ring
Potentiometric Probe
• ATC
·· Automatic temperature compensation
Process Instrumentation
HI23 is a wall mounted, microprocessor
conductivity controller that provides very
accurate measurements due to the four-
ring EC probe and Automatic Temperature
Compensation (ATC) feature.
controllers
Pt100 (not included)
Analog Output 0-10 VDC, 0-5 VDC or 1-5 VDC; 0-1mA, 0-20 mA or 4-20mA
Power Consumption 15 VA
Protection IP54
Each HI23 model is provided with dual set point and is supplied complete with instructions.
15 Industrial Grade
pH and Conductivity
Controller
with Proportional Control of
Fertilization
• Alarm
Process Instrumentation
to eliminate interference and prolong the pH Calibration through “OFFSET” and “SLOPE” trimmers for pH, and “ZERO CAL” and “SLOPE CAL” for EC
electrode’s life. Set point from 4.0 to 7.0 pH and 1.0 to 4.0 mS/cm (EC)
EC Temperature
HI9913 provides for an alarm relay which is Compensation
automatic, 0 to 50°C (32 to 122°F) with β=2%/°C
activated in several circumstances. These
two independent controls: pH from 0.0 to 2.0 and conductivity (EC)
include when the pH is below the set point Proportional Control
from 0.0 to 2.0 mS/cm with two separate time cycles from 0 to 90 seconds
by the operator-adjustable threshold of 0.5
terminals can be configured as normally open or normally closed (isolated output
to 2.5 pH, or EC exceeds the set point by a
max. 2A, max. 240V, resistive load, 1,000,000 strokes). The alarm is activated
value in the 0.5 to 2.5 mS/cm range. The alarm Alarm Contact if pH falls below the set point by the user selectable interval (0.5 to 2.5 pH), or
goes off if the pH and/or conductivity are not conductivity exceeds the set point by more than the user selectable interval (0.5 to
corrected within the operator-determined 2.5 mS/cm) or due to overdosage
time frame of 1 to 10 minutes. The alarm can two sets of independent terminals (115 to 240V, Max.2A, 1,000,000 strokes) are
be turned off during maintenance. Dosing Terminals activated whenever pH exceeds the pH set point and/or conductivity falls below the
EC set point
Fertilization status can be ascertained from a any combination pH electrode with a universal BNC connector and Hanna
distance through dosage and alarm LED’s. Probe conductivity four-ring potentiometric probe with built-in temperature sensor and
DIN connector (not included)
HI9913 accepts pH electrodes with BNC and Power Supply ±10% 115 VAC or 230 VAC ; 50/60 Hz
conductivity probes with DIN connectors.
Environment -10 to 50°C (14 to 122°F); RH max 95% non-condensing
Ordering
HI9913 is supplied complete with instructions.
Information
15.66 | www.hannainst.com pH solutions begin on page 2.142; EC solutions begin on page 5.34
HI9935
Industrial Grade pH 15
and TDS Controller
with Proportional Control
of Fertilization
• Alarm
·· The alarm is activated if pH falls below
the set point by the user selectable
Process Instrumentation
interval (0.5 to 2.5 pH),or TDS exceeds
the set point by more than the user
selectable interval (0 to 400 ppm) or
due to overdosage
• ATC
·· Automatic temperature compensation
controllers
TDS Temperature
automatic, 0 to 50°C (32 to 122°F) with β = 2%/°C activated in several circumstances. These
Compensation
include when the pH is below the set points
two independent controls: pH from 0.0 to 2.0 and TDS from 0.0 to 400 ppm (mg/L) in the operator adjustable threshold of 0.5
Proportional Control
with two separate time cycles from 0 to 90 seconds to 2.5 pH, or similarly, TDS exceeding the
terminals can be configured as normally open or normally closed (isolated output set point by a value in the 50 to 450 mg/L
max. 2A, max. 240V, resistive load, 1,000,000 strokes). The alarm is activated if (ppm) range. The alarm also goes off if the
Alarm Contact pH falls below the set point by the user selectable interval (0.5 to 2.5 pH),or TDS
pH and/or TDS are not corrected within the
exceeds the set point by more than the user selectable interval (0 to 400 ppm)
or due to overdosage operator determined time frame of 1 to 10
minutes. Moreover, the alarm configuration
two sets of independent terminals (115 to 240V, max. 2A, 1,000,000 strokes) are
Dosing Terminals activated whenever pH exceeds the pH set point and for the TDS falls below the is switchable from a normally-closed to a
TDS set point normally-open state or turned off during
maintenance. The fertilization status can be
any combination pH electrode with a universal BNC connector and Hanna TDS
Probe four-ring potentiometric probe with built-in temperature sensor and DIN connector ascertained from a distance through dosage
(not included) and alarm LED’s.
Power Supply ±10% 115 VAC or 230 VAC; 50/60 Hz
HI9935 accepts pH electrodes with a BNC
Environment -10 to 50°C (14 to 122°F); RH max 95% non-condensing
connector and TDS probes with a DIN
Case Material fiber-reinforced, self-extinguishing ABS connector.
Dimensions 221 x 181 x 86 mm (8.7 x 7.1 x 3.4’’)
pH solutions begin on page 2.142; TDS solutions begin on page 5.39 www.hannainst.com | 15.67
HI9910
15 Industrial Grade
pH Controller
with Single Set point and Proportional
Dosage
• Alarm
·· The alarm is activated if pH varies
by more than user selectable
Process Instrumentation
is user selectable between 0-20 or 4-20 from 0.00 to 14.00 pH with “COARSE” and “FINE” trimmers
Set point
mA. A dial on the front panel renders manual with “ACID” or “ALK” (alkaline) selection
temperature compensation fast and easy. mA Output user selectable 0 to 20 mA or 4 to 20 mA over the 0-14 pH range with isolated output
Proportional Control pH is user adjustable from 0.0 to 2.0 and time cycle from 0 to 90 seconds
For automatic temperature compensation,
terminals can be configured as normally open or normally closed (isolated output
hook up a three wire Pt100 to the controller.
max. 2A, max. 240V, resistive load, 1,000,000 strokes). The alarm is activated if pH
To speed up wiring, the HI9910 comes with Alarm Contact
varies by more than user selectable interval (0.5 to 2.5 pH) from set point or due
extractable terminal modules. Once wired up, to overdosage
the compartment containing the connections
relay terminals (115 to 240V, max.2A,1,000,000 strokes) are activated when pH
is protected behind a fire-retardant ABS Dosing Terminals exceeds the set point with “ACID” dosage or falls below the set point with “ALK”
panel. Several LED’s show whether the set selection (alkaline dosage)
point or alarm relays are activated from a Power Supply ±10% 115 VAC or 230 VAC; 50/60 Hz
distance.
Environment -10 to 50°C (14 to 122°F); RH max 95% non-condensing
Industrial Grade EC 15
Controller
with Proportional Fertilizer Dosing for
Hydroponics Applications
• Alarm
·· The alarm is activated if conductivity
exceeds by more than the user
Process Instrumentation
selectable interval (0.5 to 2.5 mS/cm)
from the set point or due to overdosage
• ATC
·· Automatic temperature compensation
controllers
turned off during maintenance. HI9931 also
Set point from 0 to 10.00 mS/cm
provides an isolated output signal which is
Temperature user selectable between 0-20 or 4-20 mA.
automatic, 0 to 50°C (32 to 122°F) with β= 2%/°C
Compensation
Recorder Output selectable at 0-20 mA or 4-20 mA (isolated) Hanna four-ring conductivity probes ending
Proportional Control conductivity from 0.0 to 1.6 mS/cm and time cycle from 0 to 90 seconds in a DIN connector can be quickly attached
to the HI9931. Readings are automatically
terminal can be configured as normally open or normally closed (isolated output
max. 2A, max. 240V, resistive load, 1,000,000 strokes). The alarm is activated if compensated for the effects of temperature
Alarm Contact
conductivity exceeds by more than the user selectable interval (0.5 to 2.5 mS/cm) in the 0 to 50°C (32 to 122°F) range. For
from the set point or due to overdosage quick and easy wiring, HI9931 comes with
relay (115 to 240V, max.2A, 1,000,000 strokes) is activated whenever conductivity extractable terminal modules. Several LED’s
Dosing Terminals
falls below the setpoint show whether the set point or alarm relays
four-ring potentiometric with built-in temperature sensor and DIN connector have been activated.
Probe
(not included)
15 Industrial Grade
TDS Controller
with Proportional Fertilizer Dosing for
Hydroponics Applications
• Alarm
·· Fail Safe Alarm System
• ATC
Process Instrumentation
Proportional Control TDS from 0 to 400 ppm and time cycle from 0 to 90 seconds
The extractable terminal wiring is through
terminals can be configured as normally open or normally closed (isolated output
the side of the meter with washers and max. 2A, max. 240V, resistive load, 1,000,000 strokes). The alarm is activated if TDS
grommets. The compartment containing Alarm Contact
exceeds by more than the user- selectable interval (50 to 450 ppm) from the set
the connections is enclosed behind a fire- point or due to overdosage
retardant ABS panel. relay (115 to 240V, max.2A, 1,000,000 strokes) are activated whenever TDS falls
Dosing Terminals
below the set point
Process Instrumentation
Two-Wire pH & ORP Transmitters The ability to use a thinner gauge of wire greatly reduces the costs
associated with the wiring of remote transmitters. Typically, a heavy
Two-wire transmitters are widely used for process control in industry.
gauge of shielded cable is required in order to minimize the ambient
These instruments are particularly useful in industrial conditions
electrical noise from AC power sources, interference from electrical
where electrical interference is an important factor. By galvanically
isolating the signals, any interference created is prevented from equipment, or various other sources of noise.
reaching the transmitter. Industrial environments are often associated
transmitters
Thin wire will also provide better operation when the transmitter
with corrosive conditions, therefore any instrumentation used must
current output is a 4 to 20 mA signal. All of these features and many
be resistant to liquids and corrosion. Hanna transmitters meet all
of these criteria and they only use two wires which reduces costs more, give Hanna transmitters the versatility to be used over long
and eliminates the need for an expensive coaxial cable. Two-wire distances in almost any process control application.
transmitters are ideal when used in remote applications that do not
have AC power available. Conductivity, Four-Ring Technology
As technology advances it is becoming more important to monitor Hanna conductivity transmitters use four-ring Potentiometric probes.
certain processes closely, particularly from remote locations. As opposed to the more widely used 2-electrode Amperometric
Computers are commonly used to receive signals from transducers method, the four-ring Potentiometric method provides the highest
that have travelled a great distance (up to 300 meters, 1000’). When accuracy and repeatability attainable. When measuring liquids that
transmitting signals over such a distance, it is likely that a substantial have a high conductivity, the 2-electrode system is susceptible to
portion of the signal will be absorbed by the resistance of the lines. polarization. This condition makes it exceptionally difficult to obtain
Considerable differences in ground potentials and between the measurements with any accuracy. The polarization is directly related
signal source and load, are inherent to long lines. to the electrode’s current load, and will cause a considerable, nonlinear
drop in the voltage. As a result, the solution around the electrode
Powering the system with an AC supply is beneficial in eliminating
simulates a low conductivity condition.
this problem. One of the two wires is power ground return, while the
other is the power supply. The power supply line acts in a dual manner,
Four-ring electrodes eliminate the polarization effect by splitting the
as a power supply, and as a signal carrier. This allows the transmitter to
four rings into 2 current and 2 voltage electrodes. When placed in a
operate with 2 wires.
conductive liquid, the 2 current electrodes take the alternating voltage
The signal current from the process controller is normally 4 to 20 mA. and create a current. This alternating current produces a buffer field
When the load is connected with the power supply return line, the from which polarization is absent. The voltage is then measured in this
signal current will be proportional in the range of 4 to 20 mA. field assuring no altered readings.
www.hannainst.com | 15.71
HI98143
15 pH and EC
Transmitter
with Galvanic Isolated Output
• ATC
·· Automatic temperature
compensation Connectivity
• PC compatible
Process Instrumentation
pH Electrode HI1001 pH electrode (suggested, not included), HI1283 matching pin (not included)
Casing IP54
15.72 | www.hannainst.com pH solutions begin on page 2.142; EC solutions begin on page 5.34
HI8614N · HI8614LN · HI8615N · HI8615LN
pH and ORP 15
Transmitters
with 4-20 mA Galvanically Isolated
Output
Process Instrumentation
·· Water resistant
• Backlight
·· Backlit, LCD display for "L"models
transmitters
computers or any data monitoring device that
Specifications HI8614N • HI8614LN HI8615N • HI8615LN accepts 4 to 20 mA input.
Range 0.00 to 14.00 pH; 4–20 mA ±1000 mV; 4-20 mA
”L” versions allow easy verification and
Resolution (for “L” models) 0.01 pH; 0.01 mA 1 mV; 0.01 mA
monitoring of measured values and is easier
Accuracy (@20°C/68°F) ±0.02 pH; ±0.02 mA ±5 mV; ±0.02 mA to calibrate and maintain.
offset: ±2 pH; ±2.2 mA; offset: ±100 mV; ±0.8 mA
Calibration
slope: 86 to 116%; ±0.5 mA slope: 90 to 110%; ±0.8 mA
Protection IP65
Ordering HI8614N and HI8614LN (with display) HI8615N and HI8615LN (with display) is
Information is supplied with instructions. supplied with instructions.
HI8614N without LCD
15 Conductivity
Transmitters
to use with Four-ring Probe
• ATC
·· Automatic temperature compensation
• Backlight
·· Backlit, LCD display
Process Instrumentation
Temperature
fixed or automatic with NTC sensor from 0 to 50°C (32 to 122°F) with β=2%/°C
Compensation
Protection IP65
Power Supply without LCD: 12-30 VDC; with LCD: 17-36 VDC
4-20 mA 15
Amperometer
Simulator and Calibrator
HI931002 is a portable instrument designed
by the Plant Repair and Maintenance Operator
for the MRO! This portable simulator can
monitor and regulate 4-20 mA from practically
Process Instrumentation
any process meter with or without a voltage
generator. The communication bus from
process instrumentation can be simulated in
any of the following modes:
portable
HI931002 can measure incoming current,
provide power, and simulate 4-20 mA output
to calibrate your process meter. A large LCD
shows values on the display. You can select
between drive and measurement modes
through a switch on the front panel and
Specifications HI931002
two dials allow for quick adjustment of
Active Drive 2.00 to 19.99 mA; -1.50 to 14.00 pH
the current.
Passive Drive 2.00 to 19.99 mA; -1.50 to 14.00 pH
Ranges
Active Measure 0.00 to 19.99 mA; -3.50 to 14.00 pH
www.hannainst.com | 15.75
15 BlackStone
Chemical Dosing
Pumps
Versatility
BlackStone pumps have been designed to
meet the ever changing needs of industry.
Process Instrumentation
Simple Operation
BlackStone pumps are equipped with a single
Chemical Resistance Guide*
FPM/
control for pump output. The external flow
Chemical PVC PP Hypalon FKM PVDF PTFE
rate control (potentiometer) on the face of
Acetic Acid, 80% D B A E A A
the pump allows you to adjust the percentage
of flow from 0 to 100% of the pump’s rated Bleach A B A A A B
capacity. This feature eliminates the need Citric Acid A A A A A A
to worry about stroke lengths and power Copper Cyanide A A X B A A
settings. An LED indicator lights up each time a
Copper Sulfate A A B B A A
stroke begins, allowing the user to assess the
Ferric Chloride A A B B A A
stroke rate from a distance.
Ferric Sulfate A A B B A A
from materials chosen for their inherent ability Hydrofluoric Acid (diluted) D B D A A A
to resist the effects of aggressive chemicals. Hydrogen Sulfide C A B B A A
When you select a Blackstone pump, you
Magnesium Nitrate A A A A A A
are eliminating the time consuming effort
Magnesium Sulfate A A A A A A
involved in picking the right material for your
application. Blackstone pumps are supplied Nitric Acid, 50% A C E A A A
Soaps A A B B A A
The pumphead and O-rings are made of PVDF, Sodium Bicarbonate A A A A A A
PTFE and FPM/FKM which offer unsurpassed
Sodium Bisulfite A A A A A A
resistance. The chemical resistance chart
Sodium Hydroxide, 50% A A B E A A
(right) shows how well PVDF and PTFE stand
up to some of the most aggressive chemicals. Sodium Hypochlorite, 18% A A A D A A
Tanning Reagents A A A X A A
Trichloretane E C E A A A
* PARTIAL LISTING
Symbol Key
D - Acceptable E - Not
A - Excellent B - Good C - Fair X - Unknown
(limited use) recommended
15.76 | www.hannainst.com
BL Series Dosing 15
Pumps
BlackStone’s positive displacement solenoid
Dosing Frequency
driven pumps use a minimum number of
Part Number Max Output Rated Pressure strokes/min
moving parts, therefore reducing the chance
of mechanical failure. Part wear and oiling
With Large Diaphragm
associated with motor driven pumps (ball-
BL20 18.3 lph (4.8 gph) 0.5 bar (7.4 psi) 120 bearings, gear drives and cams) are not
Process Instrumentation
BL15 15.2 lph (4.0 gph) 1 bar (14.5 psi) 120 a concern with these pumps. Blackstone
BL10 10.8 lph (2.9 gph) 3 bar (43.5 psi) 120 pumps are more accurate than standard
pumps due to the positive displacement
BL7 7.6 lph (2.0 gph) 3 bar (43.5 psi) 120
design ensuring each stroke is identical to the
strokes before and after it, thus keeping the
With Small Diaphragm
flow rate consistent.
BL5 5.0 lph (1.3 gph) 7 bar (101.5 psi) 120
BL3 2.9 lph (0.8 gph) 8 bar (116 psi) 120 A wide range of BlackStone pumps with
BL1.5 1.5 lph (0.4 gph) 13 bar (188.5 psi) 120 different dosing capacities are available for
your specific dosing needs. Each pump is
supplied with discharge and suction valves.
Specifications BL Series
Max Output see table above Rugged Design
Pump Casing fiber-reinforced polypropylene Blackstone pumps are completely sealed
pumphead in PVDF, diaphragm in PTFE, glass ball valves and O-rings in during assembly and offer IP65 protection
Materials
FPM/FKM, polyethylene 5 x 8 mm tubing against splashes and spills providing excellent
Self-priming max height: 1.5 m (5 feet) protection even in hostile environments.
Power Supply 110/115 VAC or 220/240 VAC, 50/60Hz The fiber-reinforced polypropylene housing
stands up to aggressive chemicals while
Max Power Consumption approximately 200 W
offering superior strength under tough
Protection IP65
industrial conditions.
Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing
BlackStone Pumps
Ordering Information
BL1.5-1 1.5 LPH flow rate BL7-2 7.6 LPH flow rate
BL1.5-2 1.5 LPH flow rate BL10-1 10.8 LPH flow rate
BL3-1 2.9 LPH flow rate BL10-2 10.8 LPH flow rate
BL3-2 2.9 LPH flow rate BL15-1 15.2 LPH flow rate
BL5-1 5.0 LPH flow rate BL15-2 15.2 LPH flow rate
BL5-2 5.0 LPH flow rate BL20-1 18.3 LPH flow rate
BL7-1 7.6 LPH flow rate BL20-2 18.3 LPH flow rate
-1 = 110/115 VAC power supply
-2 = 220/2400 VAC power supply
Accessories
HI721004** Injection valve assembly HI721001 Complete pumphead with valves
Housing
HI721005** Foot valve assembly HI72001 Tube nut. 5 x 8 mm dia. (100 pcs)
HI721101 Pumphead, O-ring, screws and washer HI721009 Diaphragm PVDF spring
HI721102 Discharge valve assembly HI721010 PTFE coated O-ring for pump head
Check ball
Aluminum piston, insulation disk,
HI721103 Suction valve assembly
HI721011 washer and springs replacement kit Spacer
HI721008 Ceramic weight (4) for BL pump
HI720011D Magnet and coil for BL pumps (230VAC) HI721013 Piston set for BL pump
O-ring
HI720011U Magnet and coil for BL pumps (115VAC) HI721014 Bottom housing and housing seal
HI720025 Pump body HI721104 Small diaphragm for BL pumps PVDF Nipple
Magnet pump head assembly for HI721105 BlackStone spare pump head
HI720034
BL pumps HI721106 BlackStone pump head assembly
** Required for operation
www.hannainst.com | 15.77
15 Replacement Parts Mechanical Dimensions
for BlackStone Chemical Dosing Pumps for BlackStone Chemical Dosing Pumps
Assembly Diagram
Front View
Process Instrumentation
INJECTION
VALVE
DISCHARGE
VALVE
PUMP
HEAD TUBING
CERAMIC
WEIGHT
SUCTION FOOT
VALVE VALVE
FILTER
Side View
FPM/FKM O-RING
PTFE DIAPHRAGM
MAGNET
PTFE COATED O-RING
PVDF PUMPHEAD
FPM/FKM O-RING
PVDF NIPPLE
Process Instrumentation
PTFE coated FPM/FKM O-ring, glass valve ball, the valve spacer
pumphead o-ring and seat, head nipple and the tube nut to secure the
assembled parts.
HI721102 HI721103
Suction valve assembly, complete with a FPM/FKM
spacer o-ring
O-ring, glass valve ball, the valve spacer and seat,
head nipple and the tube nut to secure the
assembled parts.
HI721004
HI721005
HI721006
HI720030
BlackStone Pumps
injection nipple PVDF spring valve assembly
HI720031
HI720032
HI721008
filter filter holder valve assembly This kit contains 4 ceramic weights.
HI740156
HI720032 HI721008
www.hannainst.com | 15.79
Electrodes Designed and Manufactured by Hanna
15 Process Electrodes
15.80 | www.hannainst.com
Electrodes Designed and Manufactured by Hanna
Process Electrodes 15
Electrolyte Contamination
The contamination of the reference half cell is linked to the diffusion
of external substances into the reference chamber (strong oxidants,
reductants, complexing agents).
Process Instrumentation
The combination of Hanna double junction technology with a polymer
reference electrolyte, reduces the diffusion process rate and keeps
the reference potential stable for long periods of time.
Dilution
When the reference cell containing concentrated 3.5M KCl electrolyte
comes in contact with a less concentrated aqueous sample, diffusion
of the electrolyte into the sample will occur. This process causes a
progressive dilution of the reference electrolyte with a consequent
variation of the reference potential.
Electrochemical Reaction
In many industrial applications, it is possible to get a potential
difference between the measuring point and the instrument. This
inconvenience originates from electrical currents that destroy the
Ag/AgCl element of the reference half-cell and also creates non-stable,
interfering potentials.
Junction Clogging
electrodes
Typical industrial applications require continuous monitoring of pH
and ORP. Periodic cleaning and maintenance of the electrode junction
ensure a stable and repeatable contact between sample and junction.
The frequency of these cleaning procedures depends on the shape of
the junction and material.
• High temperature
• Low temperature
• Acid samples containing fluoride
www.hannainst.com | 15.81
Electrodes Designed and Manufactured by Hanna
15 Process Electrodes
Temperature
Process Instrumentation
Glass
Mechanical Stress
The glass body electrode can withstand high pressure and high
In a continuous in-line installation, the glass sensor of the pH electrode temperature applications. The glass body also offers high resistance to
can be physically damaged by solution streams containing suspended aggressive chemicals (only fluoridic acid and strong alkaline solutions
solids. can damage glass).
Our Flat Tip electrodes are the best answer to this problem. The flat tip
virtually eliminates deposits that can foul the electrode, significantly
reducing necessary maintenance.
PVDF
The PVDF body used for the Flat Tip Series withstands high pressure
and high temperature applications, and guarantees a high chemical
and mechanical resistance. These characteristics makes the PVDF
electrodes
1 2
PEI
PEI is a special plastic material used first to produce electrodes by
Hanna. PEI electrodes proved to be ideally suited to field applications,
as well as industrial environments. An electrode with a PEI body
represents a very good combination of chemical, mechanical, and
thermal resistance which can be used in non-critical applications (e.g.
swimming pools), or with portable meters for routine field monitoring
and control, such as wells, lakes and rivers, and discharges of tanks and
reservoirs.
15.82 | www.hannainst.com
Electrodes Designed and Manufactured by Hanna
Process Electrodes 15
Cable Leakage
A high impedance coaxial cable, when installed more than 5 meters
away from the electrode, could also be subject to current leakage.
Quite often the installers place it in underground ducts as done with
Process Instrumentation
any other electric cable. During the installation of the cable, the
insulation may become scratched by rubbing against the pipes or
sharp corners. Underneath the insulation there is a screen connected
to the reference electrode.
electrodes
Amplifiers are usually available with water-tight casings and can
be used under extremely harsh conditions. The pH amplifier needs
a power supply and usually must also provide for galvanic insulation
between the power supply and the amplification circuit. At times it
is difficult to have a power supply close to the measuring electrode.
In such a case, 2-wire amplifiers and a 4-20 mA output can solve the
problem (see HI8614 and HI8614L produced by Hanna).
Electrode-Cable Connection
Some German manufacturers have produced pH electrodes with a
Such amplifiers need instruments with 4-20 mA input in place of, or in coaxial connector mounted directly at one end of the electrode, i.e.
parallel with, the BNC connector (some instruments are not provided without cable. The intention was to replace the electrode, without
with this option).
having to replace the connecting cable which remains attached. But
as time passed, such an intention has proven to be harmful.
To overcome the instrument limitation, in 1988, Hanna produced the
AmpHel® electrode (Amplified pH electrode). The AmpHel® electrodes
In fact, in many cases, the electrode is placed inside an electrode
feature an internal, high impedance pH amplifier with the required
holder, which protects it from test liquid (tank measurement). Moisture
batteries.
forms inside the holder because of temperature changes from day to
An AmpHel® electrode has a life of approximately 3 years from the day night. This moisture reduces the connector insulation, and the signal
it was produced. Taking into consideration that an average life for a pH to the electrode drops.
electrode is one year, this should not be considered a limitation.
When an electrode leaks, the generated emf drops and the reading
The output is still with 2 wires, as in the case of the typical coaxial drifts toward the pH 7 value. Therefore, for example, instead of pH
cable, but it has a low impedance, and allows connections up to 75 3, the measurement can be pH 3.5 or 4. This reading may result in a
meters long without delays in the measurements. dosage that is harmful to the system.
www.hannainst.com | 15.83
Electrodes Designed and Manufactured by Hanna
15 Process Electrodes
easy HI1210B/5
easy HI1210B/5
When a traditional electrode/controller system is used with the
flat tip HI1006-2005
electrode reference connected both to the electrode and to the
instrument, a current flow occurs through the reference half cell, AmpHel® HI6291005
Water Softening
causing fluctuations in reading and serious damage to the Ag/AgCl HI1000 HI1001/5, HI1002/5
element. The potential matching pin shields the reference from easy HI1210B/5
external electrical fields. Shown above, the matching pin allows the
flat tip HI1006-2005
measurement to stabilize and ensures effective process regulation. Demineralization
easy HI1090B/5
In order to function properly, the matching pin has to be continuously
immersed in the measured solution and for this reason is placed near Low Conductivity
flat tip HI1006-2005
Solutions
the electrode junction.
Swimming Pools flast tip HI1006-2005
Temperature Effect
electrodes
easy HI1210B/5
Due to a built-in temperature sensor, there is only one electrode
Sugar Industry, flat tip HI1006-2005
to install. Also due to its proximity to the pH sensor, the built-in
Paper Industry easy HI1090B/5
temperature sensor ensures fast, accurately compensated readings
even during sudden temperature fluctuations. flat tip HI1006-3005
Textile Industry, Tanneries
AmpHel® HI8299505
A Specific Electrode for Each Application Acid Samples
flat tip HI1006-4005
with Fluoride Ions
The table to the right lists the most common industrial applications
with the corresponding, recommended Hanna electrodes.
ORP Electrode
For each application, several models are available, with different Application Series CODE
options for the following characteristics: Oxidation of Cyanide
flat tip HI2004-2005
and Nitrite
• Electrode dimensions Ozonization &
AmpHel® HI6493005
Oxidant Products
• Connection type
AmpHel® HI6293005
• Installation requirement Reductant Products
HI2000 HI2003/5
(Chromate Reduction)
• Optional configurations (matching pin, Pt100 or Pt1000 sensor) easy HI3210B/5
HI2000 HI2001, HI2003/5
Hanna produces a wide range of industrial electrodes, for any specific Swimming Pools
easy HI3210B/5
application need.
15.84 | www.hannainst.com
Flat Tip Industrial Electrodes 15
17
Process Instrumentation
cal characteristics:
1. Junction
Three junction types are available:
• Self-cleaning flat tip sensor
• Annular non-clogging PTFE junction, for testing solutions with
• Significantly reduced maintenance requirement
high content of suspended solids or for high pressure installation
• Models especially designed for plating baths
• Open junction, ideal for wastewater analysis
• PVDF body
• Ceramic junction
• Three junction types: ceramic, PTFE and open
2a. pH Electrodes • Built-in potential matching pin
Hanna has developed four types of specialized glass. First is a durable • Three different glass type pH sensors
sensor glass for general purpose, industrial use. This glass can
• ORP electrodes with platinum or gold sensor
withstand the stress of daily use. The remaining types of electrode
glass allow continuous monitoring in highly acidic solutions containing • Models with built-in Pt100 or Pt1000 temp. sensor
fluoride ions, as well as high or low temperature process and streams • Internal amplifier models powered by the process controller
significantly increase the electrode life.
• 3/4” NPT external thread on both ends for easy installation
electrodes
a flat tip, virtually eliminating deposits that can foul the electrode,
3. Temperature Sensor
significantly reducing necessary maintenance. This characteristic
The pH electrodes with built-in 3-wire Pt100 or Pt1000 temperature makes flat tip electrodes ideal for continuous in-line monitoring and
sensor allow for the temperature compensation of pH readings as for solutions containing aggressive chemicals.
well as temperature measurements.
The PVDF body offers a higher level of mechanical and temperature
resistance. Moreover, the PVDF material is non-toxic and compatible
4. Connection Type with food applications.
Electrodes are wired for direct connection to a transmitter or process
Each pH and ORP electrode is provided with an internal matching pin that
controller, or with the standard BNC connector.
can avoid typical problems caused by grounding loop current, such as:
Models with a built-in amplifier are necessary for long distance • fluctuating measurements
measurements, where it is not possible to install a transmitter. • poor process regulation
Non-amplified electrodes are provided with a 5, 10 or 15 m cable (16’, acid samples with
HF 0 to 10 -5 to 60°C
33’ or 49’), while the amplified models are provided with a 15, 25, 50 or F– (*)
75 m cable (49, 82, 164 or 246’). (*) F– max 2 g/L, temperature max 60°C, pH >2
www.hannainst.com | 15.85
15 Flat Tip Industrial pH Electrodes
Process Instrumentation
06 PTFE junction
w= 16 ceramic junction
26 open junction*
0 BNC connector
HI10 w — x y z
Note: The internal amplifier can be powered directly from select Hanna process controllers or a
power source that supplies the appropriate voltage.
15.86 | www.hannainst.com
Flat Tip Industrial ORP Electrodes 15
Process Instrumentation
electrodes
Flat Tip ORP Electrodes: Ordering Information
Choose your configuration:
04 PTFE junction
w= 14 ceramic junction
24 open junction
1 platinum sensor
x=
2 gold sensor
0 BNC connector
HI20 w — x y z
Note: The internal amplifier can be powered directly from select Hanna process controllers or a
power source that supplies the appropriate voltage.
www.hannainst.com | 15.87
15 AmpHel® Flat Tip Industrial
Electrodes
• AmpHel® amplified
• Matching pin
• Flat tip
• PVDF body
Process Instrumentation
HI6101405 0-13 PVDF double, PTFE polymer GP -5 to 80 °C Pt100 6 bar (87 psi) BNC + lead 5m
HI6101415 0-13 PVDF double, PTFE polymer GP -5 to 80 °C Pt100 6 bar (87 psi) BNC + lead 15 m
HI6101605 0-12 PVDF double, PTFE polymer LT -10 to 80 °C Pt100 6 bar (87 psi) BNC + lead 5m
HI6101805 0-14 PVDF double, PTFE polymer HT 0 to 100 °C Pt100 6 bar (87 psi) BNC + lead 5m
pH Electrodes for Acid Samples with Fluoride Ions (F– max 2 g/L, Temperature Max 60 °C, pH >2)
Max
Code Range Body Junction Electrolyte Glass Type Temperature ATC Pressure Connector Cable
HI6100205 0-10 PVDF double, PTFE polymer HF -5 to 60 °C — 6 bar (87 psi) BNC 5m
HI6101205 0-10 PVDF double, PTFE polymer HF -5 to 60 °C Pt100 6 bar (87 psi) BNC + lead 5m
15.88 | www.hannainst.com
Flat Tip Industrial Electrodes Electrical 15
Connections and Installation
Electrical Connections Installation
These electrodes have been designed with ¾” external thread on both ends for easy installation.
Hanna also provides a series of probe holders for in-line, tank or by-pass installations for these
electrodes, as shown below.
Process Instrumentation
INSTALLATION
electrodes
Immersion installation in vessel, tank,
plating bath with
HI60501 (PVC) or HI60503 (PVDF)
electrode holders with adjustable
immersion level: min 10 cm, max 70 cm
www.hannainst.com | 15.89
15 Amplified pH and ORP AmpHel® Electrodes
15.90 | www.hannainst.com
Amplified pH and ORP AmpHel® Electrodes 15
Process Instrumentation
AmpHel® pH Electrodes with Replaceable Battery - General Purpose pH Electrodes
Code Body Junction Electrolyte Glass Type Temperature Max Pressure Connector Cable
HI6291005 PEI cloth gel GP -5 to 70 ° C 3 bar BNC 5m
Code Body Junction Electrolyte Glass Type Temperature Max Pressure Connector Cable
HI8299505 glass PTFE polymer HT 0 to 100 °C 3 bar BNC 5m
HI2911 HI2931
electrodes
AmpHel® pH Electrodes with Internal Battery
Code Body Junction Electrolyte Glass Type Temperature Max Pressure Connector Cable
HI2910B PEI cloth gel GP -5 to 70 °C 3 bar (43.5 psi) BNC 1m
Code Body Junction Electrolyte PIN Type Temperature Max Pressure Connector Cable
HI6293005 PEI cloth gel platinum -5 to 80 °C 3 bar (43.5 psi) BNC 5m
Code Body Junction Electrolyte PIN Type Temperature Max Pressure Connector Cable
HI2930B/5 PEI cloth gel platinum -5 to 80 °C 3 bar (43.5 psi) BNC 5m
www.hannainst.com | 15.91
HI1000 and HI2000 Series
Both pH and ORP models are available, many of which include a built- Matching pin with differential input for grounding
in matching pin. Some models also feature a built-in amplifier, which
allows for measurements to be taken far from the location of the
instrument without requiring a transmitter.
HI1001 and HI 1005 (pH Electrodes) and HI2001 (ORP Electrode with Pt sensor)
HI1005 double, PTFE polymer -5 to 80°C 6 bar (87 psi) DIN 0.5 m
15.92 | www.hannainst.com
HI1000 and HI2000 Series
Process Instrumentation
HI1000 Series: pH Electrodes
Code Junction Electrolyte Matching Pin Amplifier Temperature Max Pressure Connector Cable
HI1002/3 double, PTFE polymer — — -5 to 80°C - HT 6 bar (87 psi) BNC 3m
HI1003/3 double, PTFE polymer yes — -5 to 80°C - HT 6 bar (87 psi) BNC 3m
HI1003/5 double, PTFE polymer yes — -5 to 80°C - HT 6 bar (87 psi) BNC 5m
HI1004/15 double, PTFE polymer yes yes -5 to 80°C 6 bar (87 psi) spade lug 15 m
electrodes
Code Junction Electrolyte Matching Pin Amplifier Temperature Max Pressure Connector Cable
HI2002/3 double, PTFE polymer — — -5 to 80°C 6 bar (87 psi) BNC 3m
HI2003/3 double, PTFE polymer yes — -5 to 80°C 6 bar (87 psi) BNC 3m
HI2003/5 double, PTFE polymer yes — -5 to 80°C 6 bar (87 psi) BNC 5m
www.hannainst.com | 15.93
HI1000 and HI2000 Series
Code Junction Electrolyte Matching Pin Amplifier Temperature Max Pressure Connector Cable
HI2008 double, PTFE polymer yes yes -5 to 80°C 6 bar (87 psi) DIN 0.5 m
HI1000/HI2000 SERIES
electrodes
Installation
These sensors have a hex-shaped body for
easy installation, requiring no special tools.
Continuous in-line mounting is possible due Front thread Back thread
½” NPT ¾” NPT
to the ½” external thread. No special holders
are required: HI1000 and HI2000 series
can be used with any standard ½” pipe tee
available on the market. On the opposite
end, these probes are provided with a ¾”
thread so that they can be attached to a pipe
for dip applications.
15.94 | www.hannainst.com
Easy pH and ORP Electrodes 15
with Quick and Easy BNC Connection
• BNC connector
• Submersion and in-line
installation capability
• PEI and glass body
Process Instrumentation
Hanna offers a wide range of combination pH
and ORP electrodes specifically designed for
the needs of industrial users.
electrodes
www.hannainst.com | 15.95
15 Easy pH and ORP Electrodes
with Quick and Easy BNC Connection
Process Instrumentation
15.96 | www.hannainst.com
pH and ORP Electrodes 15
with T-type Connection
Process Instrumentation
Electrodes featuring a T-connector have
been designed by Hanna to take advantage
of both PG 13.5 thread and screw cap. The
PG 13.5 thread ensures proper in-line
installation; furthermore, the user can
quickly and easily perform all servicing and
maintenance procedures. The screw cap
allows for maximum versatility making it
possible to connect a cable of different
lengths. Easily detacheable cables make
electrode replacement simple.
electrodes
These sensors are suitable to be operated
with moderate pressure up to 3 bar (43.5 psi)
and operating temperature limits of -5 up to
95ºC (23 to 203ºF).
HI1191T double, PTFE polymer -15 to 80°C (5 to 176ºF) - LT 8 bar (116 psi) T-type
HI1192T double, PTFE polymer -15 to 80°C (5 to 176ºF) - LT 8 bar (116 psi) T-type
www.hannainst.com | 15.97
Ring
15 pH and ORP Electrodes
with T-type Connection
Process Instrumentation
HI1211T double, PTFE polymer -5 to 80°C (23 to 176ºF) - HT 3 bar (43.5 psi) T-type
Ring
Ring
HI3190T double, PTFE polymer -15 to 100°C (5 to 212ºF) 6 bar (87 psi) T-type
HI3211T double, cloth gel -5 to 80°C (23 to 176ºF) 3 bar (43.5 psi) T-type
15.98 | www.hannainst.com
pH and ORP Electrodes 15
with T-type Connection
Process Instrumentation
Combination Glass-body ORP Electrode with Gold Sensor
HI4290T single, ground glass polymer -5 to 80°C (23 to 176ºF) 3 bar (43.5 psi) T-type
electrodes
Code HI101 HI102 HI201
Description submersible pH electrode in-line pH electrode submersible ORP electrode
Recommended
20 to 40°C (68 to 104°F) - GP 20 to 40°C (68 to 104°F) - GP 20 to 40°C (68 to 104°F)
Operating Temp.
Temperature Sensor no no no
Amplifier no no no
Connection Cable HI101/3 adapter with 3 m (9.9’) cable HI101/3 adapter with 3 m (9.9’) cable HI101/3 adapter with 3 m (9.9’) cable
www.hannainst.com | 15.99
HI7635
15 In-line Conductivity
Probes
These conductivity probes combine the
proven four-ring potentiometric method
of measuring conductivity with platinum
sensors. The universally acclaimed four-ring
method provides an exceptionally stable
measurement over a wider range. These
Process Instrumentation
HI7638 · HI7639
In-line Conductivity
Probes
electrodes
HI7638/10 automatic, 0 to 50°C with NTC sensor PEI and glass 0 to 120°C (32 to 248°F) 5 bar (72.5 psi) 10 m (32.8’)/Color coded wires
HI7638/20 automatic, 0 to 50°C with NTC sensor PEI and glass 0 to 120°C (32 to 248°F) 5 bar (72.5 psi) 20 m (65.6’)/Color coded wires
HI7639 automatic, 0 to 50°C with Pt100 sensor PEI and glass 0 to 120°C (32 to 248°F) 5 bar (72.5 psi) 3 m (9.9’)/Color coded wires
15.100 | www.hannainst.com
HI3001 · HI3001D · HI3011
Flow-thru 15
DIA 5 mm Conductivity Probes
These four-ring probes measure conductivity
HEX 26.5 mm with platinum sensors. They come with
standard ½” external thread on the front for
flow-thru mounting and ¾” threads on the
back for submersion or pipe mounting.
20 mm
Process Instrumentation
These probes feature 3 m (9.9’) of cable and
the protective cover is made of PEI and can
be removed for quick maintenance. These
probes can withstand temperatures up to
¾” NPT 80°C (176°F) and 6 bars (87 psi) of pressure.
½” NPT
DIA 5 mm
In addition, HI3001 houses an NTC sensor for
Automatic Temperature Compensation.
HEX 26.5 mm
69 mm
¾” NPT ½” NPT
DIA 5 mm
Max Pressure
DIA 5 mm Code Temperature Compensation Body
HEX 26.5 mm Operating Temperature (@25ºC/77ºF) Connector Cable
HI3001 automatic, 0 to 60°C with NTC sensor PEI and PVDF 0 to 80°C (32 to 176°F) 6 bar (87 psi) — 3 m (9.9’)
HI3001D/10 69
automatic, 0 mm
to 60°C with NTC sensor PEI and PVDF 0 to 80°C (32 to 176°F) 6 bar (87 psi) DIN 10 m (32.8’)
60 mm
HI3003/D* automatic, 0 to 60°C with NTC sensor PEI and PVDF 0 to 80°C (32 to 176°F) 6 bar (87 psi) DIN 3 m (9.9’)
HI3011 — PEI and PVDF 0 to 80°C (32 to 176°F) 6 bar (87 psi) — 3 m (9.9’)
electrodes
DIA 5 mm HI3002
HEX 26.5 mm
Submersion Probes
The HI3002 four-ring probe measure EC with
¾” NPT ½” NPT
DIA 5 mm platinum sensors. It comes with standard
26.5 mm 12 mm 30.5 mm 60 mm ½” external thread on the front for flow-
HEX 26.5 mm thru mounting and ¾” threads on the back
for submersion or pipe mounting. Probes
129 mm incorporate 3 m (9.9’) of cable.
26.5 mm 12 mm 30.5 mm 60 mm
The protective probe cover is made of PEI and
129 mm
can be removed for quick maintenance. These
probes can withstand temperatures up to
½” NPT 80°C (176°F) and 6 bars (87 psi) of pressure.
DIA 5 mm
HI3002 also houses an NTC temperature
HI3002
sensor for automatically temperature
HEX 26.5 mm
compensated measurements.
12 mm 20 mm
69 mm Max Pressure
Code Temperature Compensation Body Operating Temperature (@25ºC/77ºF) Connector Cable
HI3002 automatic, 0 to 60°C with NTC sensor PEI and PVDF 0 to 80°C (32 to 176°F) 6 bar (87 psi) — 3 m (9.9’)
www.hannainst.com | 15.101
HI7610 · HI7611
15 Stainless Steel
Temperature
Probes
• Flow-through and immersion mounting
• High accuracy
• Stainless steel model with ½”
Process Instrumentation
HI7610, HI7611
GAS NPT external thread
• Glass version with high chemical
resistance and PG 13.5 external thread
HI7620 • HI7621
• High accuracy
• Glass body with high chemical resistance
and PG 13.5 external thread
15.102 | www.hannainst.com
HI60542
In-line Electrode 15
Holder
for Direct Pipe Installation
Process Instrumentation
with built-in temperature sensor and
matching pin.
Specifications HI60542
Electrode Holder Material PVC
HI60545
By-pass Loop
Electrode Holder
No Downtime
electrode holders
HI60545 is an electrode holder designed for
use in a bypass loop configuration.
Specifications HI60545
Electrode Holder Material PVC
www.hannainst.com | 15.103
HI6050
15 Submersible
Electrode Holder
These electrode mounting systems are
constructed in rugged PVC and will resist
most of the chemicals associated with
wastewater treatment.
15.104 | www.hannainst.com
HI6054B · HI6054T
Electrode Holders 15
for In-line Applications
Process Instrumentation
contact with the fluid at all times, allowing
the most accurate readings possible.
electrode holders
www.hannainst.com | 15.105
HI60501 · HI60503
15 Immersion
Electrode Holders
for Tanks, Vessels, Baths and Open
Channels
HI 605011
mounting flange
125 mm
HI60503
62 mm
15.106 | www.hannainst.com
Table of Contents 16
Glossary
IP67�����������������������������������������16.2
table of contents
Compliance�������������������������� 16.4
ISO Compliance�������������������16.5
Glossary�������������������������������� 16.6
www.hannainst.com | 16.1
16 IP67 Protection
Glossary
16.2 | www.hannainst.com
IP67 Protection 16
Glossary
IP Codes
This standard describes a system for classifying the degree of protection provided by the enclosure of electrical/electronic equipment. Developed
by the European Committee for Electro-Technical Standardization (CENELEC), these standards are designed to numerically rate an electrical
product on the level of protection its enclosure provides. By assigning different number codes, the degree of protection of the product can be
quickly and easily identified. In the IP67 code, for example, IP signifies International Protection, the first digit 6 indicates the level of protection
from solid objects, and the second digit 7 denotes the level of protection from liquids. See the tables below for the details.
Protected against solid foreign objects of 50 mm diameter 1 Protected against vertically falling water drops
1
and greater, e.g. human hands
2 Protected against vertically falling water drops tilted up to 15°
Protected against solid foreign objects of 12.5 mm diameter 3 Protected against spraying water
2
and greater, e.g. human hands
4 Protected against splashing water
Protected against solid foreign objects of 2.5 mm diameter
3 5 Protected against water jets
and greater, e.g. tools, thick wire
6 Protected against powerful water jets
Protected against solid foreign objects of 1.0 mm diameter
4
and greater, e.g. wires, screws
Protected against the effects of temporary immersion in water,
7
Ingress of dust is not totally prevented, but dust shall not penetrate up to 1 m
5 in a quantity to interfere with satisfactory operation of the
apparatus or to impair safety. Protected against the effects of continuous immersion in water,
8
beyond 1 m
6 No ingress of dust, complete protection
www.hannainst.com | 16.3
16 CE Mark Definition and Compliance
All industries make use of electronic instrumentation for their daily operations. The increased use of electronic
equipment in many industries means that more instruments are used together and in conjunction with each other, often
in a very restricted area.
Proximity of equipment has increased the likelihood of interferences between various instruments, as well as the
instruments and the environment surrounding them. Improper operation of the equipment may result from these
undesired Electromagnetic Interferences (EMI).
Glossary
• Radiated Susceptibility
·· Our instruments are not susceptible to
radiation generated by other equipment
that in turn can cause improper
operation, such as, automatic switching
Directives which sets standards Restrict the amplitude of the off and/or inaccurate measurements.
for the amount of EMI a device signals emerging from a device.
can withstand and still operate • Radiated Emissions
normally and without incurring ·· The Hanna meters do not emit
any damage. radiation that might cause improper
functioning of other equipment in
their proximity (such as switching off
Each category is further sub-divided into:
and/or inaccurate measurements).
• Conducted EMI propagated by wires (such • Susceptibility to Conducted Interferences
as power or connection cables) ·· This is caused mainly by power leads
or signal/control cables connecting
• Radiated EMI spread through the air
different devices, which could result in
The effects of these electromagnetic interferences are the main malfunctioning or permanent damage.
cause for: Hanna products come with this protection
16.4 | www.hannainst.com
Hanna Meter Vs. Meter without CE 16
E
Both meters were subjected to the effects of an external electro- R
magnetic field, in accordance with the procedures established by R
O
the CE Directives. The graphs show the measurements taken at R
different frequencies.
As you can see from the histograms, at 3 V/meter and 100 MHz
Glossary
frequency, the Hanna meters stayed within the stated tolerance,
wheras the non-CE model displayed an erroneous reading of almost 5
pH! The rest of the graph also demonstrates that the readings from FREQUENCY (MHz)
SUSCEPTIBILITY TEST
Our commitment to provide Hanna HI 98240
EN 61000-6-3 and
EN 61010-1.
FREQUENCY (MHz)
Hanna is an ISO 9001:2008 certified company. With Hanna, you receive products manufactured
Our production system is certified to guarantee to the most stringent quality standards.
our customers a quality product every time.
www.hannainst.com | 16.5
16 Glossary
ABS AOAC
Acrylonitrile butadiene styrene is a common Association of Official Analytical Chemists
thermoplastic.
ABS/LAS ASBC
Alkyl benzene sulfonate / Linear alkyl American Society of Brewing Chemists.
sulfonate (detergents)
ASTM
Absorbance American Society for Testing and Materials.
Glossary
16.6 | www.hannainst.com
Glossary 16
Glossary
concentration of a substance in an unknown
Degrees Brix is a unit representative of the sample by comparing the unknown to a set of
sugar content of an aqueous solution. One standard samples of known concentration.
degree Brix corresponds to 1 gram of sucrose A calibration curve is one approach to the
in 100 grams of solution (% w/w). problem of instrument calibration; other
approaches may mix the standard into the
°C unknown, giving an internal standard.
Celsius temperature degree; °C = (°F-32) / 5/9
The calibration curve is a plot of how the
instrumental response, the so called analytical
CAL Check™
signal, changes with the concentration of
With the Hanna exclusive CAL Check the analyte (the substance to be measured).
validation function, users are able to verify
The operator prepares a series of standards
the performance of the instrument at any
across a range of concentrations near
time. Taking just a few short steps, the
the expected concentration of analyte in
validation procedure is extremely user
the unknown. The concentrations of the
friendly and ensures that the meter is
properly calibrated. standards must lie within the working range
of the technique (instrumentation) they are
using. Analyzing each of these standards
Calibration
using the chosen technique will produce a
Calibration is the validation of specific series of measurements. For most analyses,
measurement techniques and equipment. a plot of instrument response vs. Analyte
concentration will show a linear relationship.
The bias is the difference between the mean
The operator can measure the response of
of the measurements and the reference
value. The procedure that establishes and the unknown, and using the calibration curve,
corrects the bias is the calibration. they can interpolate to find the concentration
of analyte.
At the simplest level, calibration is a
comparison between measurements — one of Candela
known magnitude or correctness made or set
with one device and another measurement The candela is the luminous intensity, in
made in as similar a way as possible with a a given direction, of a source that emits
second device. monochromatic radiation of frequency 540
× 1012 hertz and that has a radiant intensity
Calibration is often regarded as including the in that direction of 1/683 watt per steradian.
process of adjusting the output or indication
on a measurement instrument to agree with
the value of the applied standard, within a
CaT
specified accuracy. Calcium tartrate
www.hannainst.com | 16.7
16 Glossary
CPS™
Glossary
CIS
Clogging Prevention System. Conventional
Commonwealth of Independent States
pH electrodes use ceramic junctions that may
clog quickly when used in biological samples
Cleaning Solution such as wine. When the junction is blocked,
The solution used for cleaning the glass the entire electrode will not function properly.
bulb of the electrode/probe once a day or at Electrodes that feature CPS™ technology
least once a week to maintain accuracy and utilize a ground glass/PTFE sleeve junction
to prevent junction clogging. which controls a steady, predictable flow of
fill solution thus keeping the junction open.
The hydrophobic property of PTFE sleeve
Clip-Lock™
repels wetness and coatings.
Interrupting an important cycle of analysis
due to a malfunctioning burette is a thing of
CYAC
the past. With the Hanna Clip-Lock™ system
you can simply substitute the burette and Cyanuric Acid
complete all your tests with the same titrant!
°Dornic
The Clip-Lock™ exchangeable burette system
prevents cross contamination while reducing Determined by titrating a 100 mL sample
loss of time and reagents. Burettes simply with N/9 sodium hydroxide to a phenolphthalein
slide out for quick exchanges, and detaching end point.
the aspiration and dispensing tubes from the
titrant bottles is easy. Delrin
A plastic made from Acetal Homopolymer;
COD a crystalline plastic that offers an excellent
Chemical Oxygen Demand is a measure of the balance of properties that bridge the gap
oxygen equivalent of the organic matter in between metals and plastics.
the sample that is susceptible to oxidation by
a strong oxidizing agent. Detection Limit
In analytical chemistry, the detection limit
Colorimeter LOD of an individual analytical procedure is
(see Photometer) the lowest amount of analyte in a sample
which can be detected but not necessarily
quantitated as an exact value; or the
Colorimetry
lowest quantity of a substance that can
Colorimetry is concerned with the be distinguished from the absence of that
determination of the concentration of a substance (a blank value) within a stated
substance by measurement of the relative confidence limit (generally 1%).
absorption of light with respect to a known
concentration of the substance. In visual The detection limit is estimated from the
colorimetry, natural or artificial white light mean of the blank, the standard deviation of
is generally used as a light source, and the blank and some confidence factor. Another
determinations are usually made with a consideration that affects the detection limit
simple instrument termed a photometer, or is the accuracy of the model used to predict
color comparator. When the eye is replaced by concentration from the raw analytical signal.
a photoelectric cell (thus largely eliminating There are a number of different “detection
16.8 | www.hannainst.com
Glossary 16
limits” that are commonly used. These of samples at many concentrations. Hanna
include: the instrument detection limit (IDL), direct reading meters such as the HI 98184
the method detection limit (MDL) and the and HI 98185 display concentration of the
limit of quantitation (LOQ). unknown sample by a direct reading after
calibrating the instrument with two or more
Even when the same terminology is used,
standards. Ionic strength adjustments are
there can be differences in the LOD, according
made to both samples and standards. In some
to nuances of what definition is used and
applications quick and reliable measurements
what type of noise contributes to the
measurement and calibration. can be made on-site, without taking samples
back to the laboratory.
Glossary
Most analytical instruments produce a signal
even when a blank (matrix without analyte) DiST®
is analyzed. This signal is referred to as the
noise level. Hanna Dissolved Solids Testers are widely
used for monitoring EC/TDS in water
The IDL is the analyte concentration that is conditioning, reverse osmosis, cooling towers,
required to produce a signal greater than three drinking water, wastewater, laboratories,
times the standard deviation of the noise level. agriculture, aquaculture and aquariums,
hydroponics and the printing industry.
Many times there is more to the analytical
method than just doing a reaction or submitting
it to direct analysis. For example it might dKH
be necessary to heat a sample that is to be Degrees of carbonate hardness.
analyzed for a particular metal with the addition In case of alkalinity: 1 dKH = 0.36
of acid first (this is called digestion). The sample meq/L = 17.86 mg/L CaCO3
may also be diluted or concentrated prior to
analysis on an instrument.
DO
Additional steps in an analysis add additional Dissolved Oxygen. A relative measure of the
opportunities for error.
amount of oxygen that is dissolved or carried
in a given medium.
Since detection limits are defined in terms
of error, this will naturally increase the
measured detection limit. This detection DPD
limit (with all steps of the analysis included)
N,N-diethyl-p-phenylenediamine
is called the MDL.
EBC
Dew Point
European Brewery Convention.
The dew point is defined as the temperature
to which air must be cooled in order for
condensation (saturation) to occur. The dew EC
point is dependent on the concentration Electrical conductivity is a measure of how
of water vapor present, and therefore, the well a material accommodates the transport
relative humidity.
of electric charge. Its SI derived unit is the
Siemens per meter, (A2s3m-3kg-1) (named
DIN Connector after Werner von Siemens). It is the ratio
A circular connector for consumer electronics, of the current density to the electric field
originally standardized by the Deutches strength. This applies also to the electrolytic
Institut für Normung (DIN) for analog audio conductivity of a fluid.
signals.
EDTA
Direct Potentiometry
Edetic acid; etylenediaminetetraacetic acid
Direct Potentiometry is a widely used
method of performing ion analysis with ISEs.
This method is highly effective when the
EES
user must quickly measure large batches Sodium exchangeable ( in meq/100 g soil)
www.hannainst.com | 16.9
16 Glossary
FDA bottle = bottles that meet FDA organizational process and the conditions
Standards. under which non-clinical health and
environmental safety studies are planned,
Filling Solution performed, monitored, recorded, archived
and reported.
Solution containing the anion to which the
reference electrode of the operational pH
GP Glass
cell is reversible, eg. Chloride for Ag-AgCl
electrodes. Hanna’s GP (general purpose) hydrogen
sensitive glass provides the best response
FNU over the entire pH range and can be used for
a wide range of applications. Great results
Formazin Nephelometric Unit.
are obtained with sphere geometry with
diameter of 9.5 mm (0.37’’). This achieves a
FTU system with 100 MΩ, impedance. The GP glass
Formazin Turbidity Unit. is also used on smaller diameter spheres.
16.10 | www.hannainst.com
Glossary 16
GPS HR
Global Positioning System High Range.
GR HT Glass
Gypsum Requirement (metric ton/ha or ton/ Designed for extended use at elevated
acre). temperature. The glass impedance has a
temperature coefficient of about 14.3%
H2T per degree Celsius. HT sensitive glass has
Glossary
Tartaric Acid. an impedance of 400 MΩ at approximately
25°C (77°F). At extremely high temperatures,
HACCP the impedance drops significantly. This
glass makes it possible to obtain accurate,
Hazard Analysis and Critical Control Points.
high temperature pH measurements for
extended periods of time 90°C (194°F) and
HC for a few weeks at 100°C (212°F). At room
Handheld Colorimeter. temperature, the response time may increase
so additional time for equilibration in buffers
HF Glass should be allowed. This glass is clear.
www.hannainst.com | 16.11
16 Glossary
Ionic Strength Adjusters (ISA) are formulated 1 °KMW is roughly equivalent to 1 %Brix or
to provide a constant ionic strength in 5 °Oe.
sample and standards alike, thus permitting
concentration rather than activity
% l.a.
measurements to be made. In some cases Percent lactic acid is determined by titrating
ISA’s adjust pH and eliminate matrix effects. a 20 mL or 20 g sample diluted with twice its
volume of deionized or distilled water with 0.1
ISE M sodium hydroxide to a phenolphthalein end
point.
Ion Selective Electrode, also known as a
specific ion electrode. ISE’s are sensors that LCD
convert the activity of a specific ion dissolved
Liquid Crystal Display.
in a solution into an electrical potential, which
can be measured by a pH meter or a voltmeter. LDL Cholesterol
ISO Standards Low-density lipoprotein cholesterol.
16.12 | www.hannainst.com
Glossary 16
Linearity MEBAK
The linearity of an analytical procedure is its Central European Brewing Commission.
ability (within a given range) to obtain test
results which are directly proportional to the meq/L
concentration of analyte in the sample.
Milliequivalents per liter.
Glossary
LR Mho/cm
Low Range. see S/cm.
MEADOS NPK
Measuring and Dosing System. Nitrogen, phosphorus, and potassium.
www.hannainst.com | 16.13
16 Glossary
NPT PD Controller
National Pipe Thread. A U.S. standard for Proportional Derivative controller.
tapered threads used on threaded pipes
and fittings.
PEI
NTU Polyetherimide.
OUR Photometer
Oxygen Uptake Rate. Used to determine the An instrument used for measuring of
oxygen consumption or respiration rate; is
photometric quantities by means of a
measured in mg of oxygen consumed per liter
photoreceptor.
per hour.
PCU PLC
Platinum Cobalt Unit. Programmable Logic Controller.
16.14 | www.hannainst.com
Glossary 16
Glossary
stoichiometric endpoint. An example of a
precipitation titration is the determination of parts per thousand; as concentration:
chloride using silver nitrate. A silver ISE can be 1 ppt = 1 g substance /L solution.
used to follow this titration. A complexometric
titration is used for the determination of
Pt100
calcium. A calcium solution is titrated with the
complexing reagent EDTA. During the titration, Platinum sensors with means a resistance
there is a gradual decrease in the free Ca2+ ion of 100Ω 0ºC with a temperature coefficient
concentrations as more EDTA is added. The of 0.00385Ω per degree Celsius. Similar for
endpoint corresponds to the point when all Pt1000.
the Ca2+ is complexed. The progress of this
titration can be monitored using a calcium ISE.
PTFE
Pre-amplified Electrode PolyTetraFluoroEthylene. Porous PTFE is a
hydrophobic material that is available with
Hanna electrode containing an internal pre-
amplifier. The pre-amplifier converts the high different porosities. Because of its chemical
impedance signal from the pH glass to a low advantages, PTFE is widely used in industrial
impedance signal thus allowing the user to applications.
use long runs of sensor cable with ordinary
connectors without noisy or voltage drops PVC
resulting in erroneous measurements.
Polyvinyl chloride.
Precision PVDF
The precision of an analytical procedure Polyvinylidene Fluoride—a highly non-reactive
expresses the closeness of agreement (degree
and pure thermoplastic fluoropolymere.
of scatter) between a series of measurements
obtained from multiple sampling of the same
PWT
homogeneous sample under the prescribed
conditions. Precision may be considered at three Pure Water Test.
levels: repeatability, intermediate precision and
reproducibility. QC
Precision should be investigated using Quality Control.
homogeneous, authentic samples.
However, if it is not possible to obtain Range
a homogeneous sample it may be The range of an analytical procedure is
investigated using artificially prepared the interval between the upper and lower
samples or a sample solution.
concentrations of analyte in the sample
www.hannainst.com | 16.15
16 Glossary
Refractive Index is defined as the ratio of the defining the electrical characteristics of
speed of light in empty space to the speed of drivers and receivers for use in balanced
light in the substance.
digital multipoint systems. RS-485 can be
used effectively over long distances and in
Repeatability electrically noisy environments.
Repeatability expresses the precision under
the same operating conditions over a short S/cm
interval of time. Repeatability is also termed The siemens (S) unit is named after Werner
intra-assay precision. von Siemens, the 19th century German
inventor and entrepreneur in the area of
Reproducibility electrical engineering. Previously to the
Reproducibility expresses the precision siemens per meter unit, mho/cm was used
between laboratories collaborative studies, to measure conductivity, where the unit
(usually applied to standardization of “mho” is a reciprocal ohm. The “mho” is “ohm”
methodology). spelled backwards. Because of the history
of conductivity, μmho/cm and mmho/cm is
Resistivity commonly translated to μS/cm and mS/cm
Electrical resistivity (also known as specific because they correspond one-to-one.
electrical resistance) is a measure indicating
how strongly a material opposes the flow of The unit of measurement commonly used
electric current. A low resistivity indicates a is one millionth of a Siemens per centimeter
material that readily allows the movement of (micro-Siemens per centimeter or μS/cm).
electrons. The SI unit for electrical resistivity
is the ohm meter. When measuring more concentrated
solutions, the units are expressed as
RH milli-Siemens/cm or mS/cm (thousandths
of a Siemens). For ease of expression,
Relative humidity is expressed as the ratio of
1000 μS/cm are equal to 1 mS/cm.
the quantity of water vapor present in the air
to the quantity at which the air would reach
saturation (100%) at a given temperature. Salinity
Salinity is a measurement without the unit
Robustness corresponding to the weight of dissolved
The robustness of an analytical procedure is a salts in seawater. Salinity is calculated
measure of its capacity to remain unaffected from an empirical relationship between the
by small, but deliberate variations in method conductivity and the salinity of a seawater
parameters and provides an indication of its sample. Oceanographic Tables and Standards
reliability during normal usage. endorsed by UNESCO/SCOR/ICES/IAPSO are
used for the calculation.
rpm
Revolutions per minute. Salinity measurements are performed with
no direct temperature correction. The salinity
RS range is calibrated using a standard sea water
Reducing Sugars. solution.
16.16 | www.hannainst.com
Glossary 16
SAR Specificity
Sodium Absorbtion Ratio (meq/L). Specificity is the ability to assess
unequivocally the analyte in the presence
Sensor Check™ of components which may be expected to
be present. Typically these might include
Allows users to check electrode status at any
impurities, degradants, matrix, etc.
time.
°SH Speedsafe™
Glossary
Each Hanna stirrer is equipped with a speed
Soxlet Henkel degrees is determined by
sensing device (opto-sensor) coupled with
titrating a 50 mL sample with 0.1 M sodium
an FVC (frequency voltage converter), which
hydroxide to a phenolphthalein end point.
monitors the speed. As the speed reaches a
preset maximum level, the speed limiter shuts
SHE
down the VCO to slow down the motor speed.
Standard Hydrogen Electrode. This ensures that when the load is suddenly
removed from the stirrer, the motor will not
SMART electrode accelerate to such a high speed that will be
With models that feature our SMART circuitry, hazardous to both the user and the stirrer; a
an exclusive microchip embedded inside the feature not commonly found in conventional
SOP TDS
Standard Operating Procedures means Total Dissolved Solids (often abbreviated
documented procedures which describe TDS) is a measure of the combined content
how to perform tests or activities normally of all inorganic and organic substances
not specified in detail in study plans or contained in a liquid in: molecular, ionized or
tests guidelines. micro-granular (colloidal sol) suspended form.
www.hannainst.com | 16.17
16 Glossary
TEA USDA
Total Exchangeable Acidity - A measure of United States Department of Agriculture.
the amount of acidic cations (hydrogen,
aluminum, iron and manganese) present in USP
soil. It is expressed in Milliequivalents per 100
US Pharmacopoeia. USP <645> with Stage
grams (meq/100 g) of soil.
1, 2 and 3 compliance is required for purified
water and WFI (water for injection). Hanna
°Th offers instruments that are able to perform
Degree Thörner is determined by titrating a all three stages required by this standard.
Glossary
10 mL sample diluted with twice its volume of Some of these requirements are: Resolution
deionized or distilled water with 0.1 M sodium of 0.1 μS/cm or better, accuracy at 1.3μS/cm
hydroxide to a phenolphthalein end point. of 0.1μS/cm, to be able to read with or without
automatic temperature compensation, the
Timer Function cell constant be known with an uncertainty
better than ±2%.
Counts down to appropriate time interval
before a reading is displayed. This feature
UV
ensures consistency in measurements.
Ultraviolet—electromagnetic radiation with
a wavelength shorter than that of VIS, but
TPTZ
longer than X-rays (10-400 nm).
2,4,6-tri-(2-pyridyl)-1,3,5-triazine (iron
indicator)
VCO
Voltage Controlled Oscillator.
Traceability [IUPAC]
Property of the result of a measurement
VIS
or the value of a standard whereby it can
be related to stated references, usually The visible spectrum - is the portion of the
national or international standards, through electromagnetic spectrum that is visible (can
an unbroken chain of comparisons all having be detected by) to the human eye (390 - 750
stated uncertainties. The concept is often nm for typical human eye).
expressed by the adjective traceable. The
unbroken chain of comparisons is called a WHO
traceability chain. World Health Organization.
Turbidity
Turbidity of water is an optical property that
causes light to be scattered and absorbed,
rather than transmitted. The scattering
of the light that passes through a liquid is
primarily caused by the suspended solids.
The higher the turbidity, the greater the
amount of scattered light. Because even the
molecules in a very pure fluid scatter light to
a certain degree, no solution will have zero
turbidity.
UPW
Ultra Pure Water.
USB
Universal Serial Bus is a application to
establish communication between various
devices and a host controller (usually a PC).
16.18 | www.hannainst.com
Equilibrium Relative Humidity 17
Temperature °C Lithium Chloride Potassium Acetate Magnesium Chloride Potassium Carbonate Magnesium Nitrate
0 11.23 ± 0.54 33.66 ± 0.33 43.13 ± 0.66 60.35 ± 0.55
10 11.29 ± 0.41 23.28 ± 0.53 33.47 ± 0.24 43.14 ± 0.39 57.36 ± 0.33
15 11.30 ± 0.35 23.40 ± 0.32 33.30 ± 0.21 43.15 ± 0.33 55.87 ± 0.27
20 11.31 ± 0.31 23.11 ± 0.25 33.07 ± 0.18 43.16 ± 0.33 54.38 ± 0.23
Technical Tables
25 11.30 ± 0.27 22.51 ± 0.32 32.78 ± 0.16 43.16 ± 0.39 52.89 ± 0.22
30 11.28 ± 0.24 21.61 ± 0.53 32.44 ± 0.14 43.17 ± 0.50 51.40 ± 0.24
85 78.68 ± 0.89
90 78.50 ± 1.00
95
100
www.hannainst.com | 17.1
Thermoelectric Voltage in milliVolts
Reference Tables
17 Thermocouple Reference Tables N.I.S.T Rev. ITS-90
-170 -5.354 -5.374 -5.395 -5.415 -5.435 -5.454 -5.474 -5.493 -5.512 -5.531 -5.550 -170
-160 -5.141 -5.163 -5.185 -5.207 -5.228 -5.250 -5.271 -5.292 -5.313 -5.333 -5.354 -160
-150 -4.913 -4.936 -4.960 -4.983 -5.006 -5.029 -5.052 -5.074 -5.097 -5.119 -5.141 -150
-140 -4.669 -4.694 -4.719 -4.744 -4.768 -4.793 -4.817 -4.841 -4.865 -4.889 -4.913 -140
-130 -4.411 -4.437 -4.463 -4.490 -4.516 -4.542 -4.567 -4.593 -4.618 -4.644 -4.669 -130
-120 -4.138 -4.166 -4.194 -4.221 -4.249 -4.276 -4.303 -4.330 -4.357 -4.384 -4.411 -120
-110 -3.852 -3.882 -3.911 -3.939 -3.968 -3.997 -4.025 -4.054 -4.082 -4.110 -4.138 -110
-100 -3.554 -3.584 -3.614 -3.645 -3.675 -3.705 -3.734 -3.764 -3.794 -3.823 -3.852 -100
-90 -3.243 -3.274 -3.306 -3.337 -3.368 -3.400 -3.431 -3.462 -3.492 -3.523 -3.554 -90
-80 -2.920 -2.953 -2.986 -3.018 -3.050 -3.083 -3.115 -3.147 -3.179 -3.211 -3.243 -80
-70 -2.587 -2.620 -2.654 -2.688 -2.721 -2.755 -2.788 -2.821 -2.854 -2.887 -2.920 -70
-60 -2.243 -2.278 -2.312 -2.347 -2.382 -2.416 -2.450 -2.485 -2.519 -2.553 -2.587 -60
-50 -1.889 -1.925 -1.961 -1.996 -2.032 -2.067 -2.103 -2.138 -2.173 -2.208 -2.243 -50
-40 -1.527 -1.564 -1.600 -1.637 -1.673 -1.709 -1.745 -1.782 -1.818 -1.854 -1.889 -40
-30 -1.156 -1.194 -1.231 -1.268 -1.305 -1.343 -1.380 -1.417 -1.453 -1.490 -1.527 -30
-20 -0.778 -0.816 -0.854 -0.892 -0.930 -0.968 -1.006 -1.043 -1.081 -1.119 -1.156 -20
-10 -0.392 -0.431 -0.470 -0.508 -0.547 -0.586 -0.624 -0.663 -0.701 -0.739 -0.778 -10
0 0.000 -0.039 -0.079 -0.118 -0.157 -0.197 -0.236 -0.275 -0.314 -0.353 -0.392 0
°C 0 1 2 3 4 5 6 7 8 9 10 °C
0 0.000 0.039 0.079 0.119 0.158 0.198 0.238 0.277 0.317 0.357 0.397 0
10 0.397 0.437 0.477 0.517 0.557 0.597 0.637 0.677 0.718 0.758 0.798 10
20 0.798 0.838 0.879 0.919 0.960 1.000 1.041 1.081 1.122 1.163 1.203 20
30 1.203 1.244 1.285 1.326 1.366 1.407 1.448 1.489 1.530 1.571 1.612 30
40 1.612 1.653 1.694 1.735 1.776 1.817 1.858 1.899 1.941 1.982 2.023 40
50 2.023 2.064 2.106 2.147 2.188 2.230 2.271 2.312 2.354 2.395 2.436 50
60 2.436 2.478 2.519 2.561 2.602 2.644 2.685 2.727 2.768 2.810 2.851 60
70 2.851 2.893 2.934 2.976 3.017 3.059 3.100 3.142 3.184 3.225 3.267 70
80 3.267 3.308 3.350 3.391 3.433 3.474 3.516 3.557 3.599 3.640 3.682 80
90 3.682 3.723 3.765 3.806 3.848 3.889 3.931 3.972 4.013 4.055 4.096 90
100 4.096 4.138 4.179 4.220 4.262 4.303 4.344 4.385 4.427 4.468 4.509 100
110 4.509 4.550 4.591 4.633 4.674 4.715 4.756 4.797 4.838 4.879 4.920 110
120 4.920 4.961 5.002 5.043 5.084 5.124 5.165 5.206 5.247 5.288 5.328 120
130 5.328 5.369 5.410 5.450 5.491 5.532 5.572 5.613 5.653 5.694 5.735 130
140 5.735 5.775 5.815 5.856 5.896 5.937 5.977 6.017 6.058 6.098 6.138 140
150 6.138 6.179 6.219 6.259 6.299 6.339 6.380 6.420 6.460 6.500 6.540 150
160 6.540 6.580 6.620 6.660 6.701 6.741 6.781 6.821 6.861 6.901 6.941 160
170 6.941 6.981 7.021 7.060 7.100 7.140 7.180 7.220 7.260 7.300 7.340 170
180 7.340 7.380 7.420 7.460 7.500 7.540 7.579 7.619 7.659 7.699 7.739 180
190 7.739 7.779 7.819 7.859 7.899 7.939 7.979 8.019 8.059 8.099 8.138 190
200 8.138 8.178 8.218 8.258 8.298 8.338 8.378 8.418 8.458 8.499 8.539 200
210 8.539 8.579 8.619 8.659 8.699 8.739 8.779 8.819 8.860 8.900 8.940 210
220 8.940 8.980 9.020 9.061 9.101 9.141 9.181 9.222 9.262 9.302 9.343 220
230 9.343 9.383 9.423 9.464 9.504 9.545 9.585 9.626 9.666 9.707 9.747 230
240 9.747 9.788 9.828 9.869 9.909 9.950 9.991 10.031 10.072 10.113 10.153 240
250 10.153 10.194 10.235 10.276 10.316 10.357 10.398 10.439 10.480 10.520 0.561 250
260 10.561 10.602 10.643 10.684 10.725 10.766 10.807 10.848 10.889 10.930 10.971 260
270 10.971 11.012 11.053 11.094 11.135 11.176 11.217 11.259 11.300 11.341 11.382 270
280 11.382 11.423 11.465 11.506 11.547 11.588 11.630 11.671 11.712 11.753 11.795 280
290 11.795 11.836 11.877 11.919 11.960 12.001 12.043 12.084 12.126 12.167 12.209 290
300 12.209 12.250 12.291 12.333 12.374 12.416 12.457 12.499 12.540 12.582 12.624 300
310 12.624 12.665 12.707 12.748 12.790 12.831 12.873 12.915 12.956 12.998 13.040 310
320 13.040 13.081 13.123 13.165 13.206 13.248 13.290 13.331 13.373 13.415 13.457 320
330 13.457 13.498 13.540 13.582 13.624 13.665 13.707 13.749 13.791 13.833 13.874 330
340 13.874 13.916 13.958 14.000 14.042 14.084 14.126 14.167 14.209 14.251 14.293 340
350 14.293 14.335 14.377 14.419 14.461 14.503 14.545 14.587 14.629 14.671 14.713 350
360 14.713 14.755 14.797 14.839 14.881 14.923 14.965 15.007 15.049 15.091 15.133 360
370 15.133 15.175 15.217 15.259 15.301 15.343 15.385 15.427 15.469 15.511 15.554 370
380 15.554 15.596 15.638 15.680 15.722 15.764 15.806 15.849 15.891 15.933 15.975 380
390 15.975 16.017 16.059 16.102 16.144 16.186 16.228 16.270 16.313 16.355 16.397 390
400 16.397 16.439 16.482 16.524 16.566 16.608 16.651 16.693 16.735 16.778 16.820 400
410 16.820 16.862 16.904 16.947 16.989 17.031 17.074 17.116 17.158 17.201 17.243 410
420 17.243 17.285 17.328 17.370 17.413 17.455 17.497 17.540 17.582 17.624 17.667 420
430 17.667 17.709 17.752 17.794 17.837 17.879 17.921 17.964 18.006 18.049 18.091 430
440 18.091 18.134 18.176 18.218 18.261 18.303 18.346 18.388 18.431 18.473 18.516 440
450 18.516 18.558 18.601 18.643 18.686 18.728 18.771 18.813 18.856 18.898 18.941 450
460 18.941 18.983 19.026 19.068 19.111 19.154 19.196 19.239 19.281 19.324 19.366 460
470 19.366 19.409 19.451 19.494 19.537 19.579 19.622 19.664 19.707 19.750 19.792 470
480 19.792 19.835 19.877 19.920 19.962 20.005 20.048 20.090 20.133 20.175 20.218 480
490 20.218 20.261 20.303 20.346 20.389 20.431 20.474 20.516 20.559 20.602 20.644 490
500 20.644 20.687 20.730 20.772 20.815 20.857 20.900 20.943 20.985 21.028 21.071 500
510 21.071 21.113 21.156 21.199 21.241 21.284 21.326 21.369 21.412 21.454 21.497 510
520 21.497 21.540 21.582 21.625 21.668 21.710 21.753 21.796 21.838 21.881 21.924 520
530 21.924 21.966 22.009 22.052 22.094 22.137 22.179 22.222 22.265 22.307 22.350 530
540 22.350 22.393 22.435 22.478 22.521 22.563 22.606 22.649 22.691 22.734 22.776 540
17.2 | www.hannainst.com
Thermoelectric Voltage in milliVolts
Reference Tables
N.I.S.T Rev. ITS-90 Thermocouple Reference Tables 17
Technical Tables
650 27.025 27.067 27.109 27.152 27.194 27.236 27.278 27.320 27.363 27.405 27.447 650
660 27.447 27.489 27.531 27.574 27.616 27.658 27.700 27.742 27.784 27.826 27.869 660
670 27.869 27.911 27.953 27.995 28.037 28.079 28.121 28.163 28.205 28.247 28.289 670
680 28.289 28.332 28.374 28.416 28.458 28.500 28.542 28.584 28.626 28.668 28.710 680
690 28.710 28.752 28.794 28.835 28.877 28.919 28.961 29.003 29.045 29.087 29.129 690
700 29.129 29.171 29.213 29.255 29.297 29.338 29.380 29.422 29.464 29.506 29.548 700
710 29.548 29.589 29.631 29.673 29.715 29.757 29.798 29.840 29.882 29.924 29.965 710
720 29.965 30.007 30.049 30.090 30.132 30.174 30.216 30.257 30.299 30.341 30.382 720
730 30.382 30.424 30.466 30.507 30.549 30.590 30.632 30.674 30.715 30.757 30.798 730
740 30.798 30.840 30.881 30.923 30.964 31.006 31.047 31.089 31.130 31.172 31.213 740
750 31.213 31.255 31.296 31.338 31.379 31.421 31.462 31.504 31.545 31.586 31.628 750
760 31.628 31.669 31.710 31.752 31.793 31.834 31.876 31.917 31.958 32.000 32.041 760
770 32.041 32.082 32.124 32.165 32.206 32.247 32.289 32.330 32.371 32.412 32.453 770
780 32.453 32.495 32.536 32.577 32.618 32.659 32.700 32.742 32.783 32.824 32.865 780
790 32.865 32.906 32.947 32.988 33.029 33.070 33.111 33.152 33.193 33.234 33.275 790
800 33.275 33.316 33.357 33.398 33.439 33.480 33.521 33.562 33.603 33.644 33.685 800
810 33.685 33.726 33.767 33.808 33.848 33.889 33.930 33.971 34.012 34.053 34.093 810
820 34.093 34.134 34.175 34.216 34.257 34.297 34.338 34.379 34.420 34.460 34.501 820
830 34.501 34.542 34.582 34.623 34.664 34.704 34.745 34.786 34.826 34.867 34.908 830
840 34.908 34.948 34.989 35.029 35.070 35.110 35.151 35.192 35.232 35.273 35.313 840
850 35.313 35.354 35.394 35.435 35.475 35.516 35.556 35.596 35.637 35.677 35.718 850
860 35.718 35.758 35.798 35.839 35.879 35.920 35.960 36.000 36.041 36.081 36.121 860
870 36.121 36.162 36.202 36.242 36.282 36.323 36.363 36.403 36.443 36.484 36.524 870
880 36.524 36.564 36.604 36.644 36.685 36.725 36.765 36.805 36.845 36.885 36.925 880
890 36.925 36.965 37.006 37.046 37.086 37.126 37.166 37.206 37.246 37.286 37.326 890
900 37.326 37.366 37.406 37.446 37.486 37.526 37.566 37.606 37.646 37.686 37.725 900
910 37.725 37.765 37.805 37.845 37.885 37.925 37.965 38.005 38.044 38.084 38.124 910
920 38.124 38.164 38.204 38.243 38.283 38.323 38.363 38.402 38.442 38.482 38.522 920
930 38.522 38.561 38.601 38.641 38.680 38.720 38.760 38.799 38.839 38.878 38.918 930
940 38.918 38.958 38.997 39.037 39.076 39.116 39.155 39.195 39.235 39.274 39.314 940
950 39.314 39.353 39.393 39.432 39.471 39.511 39.550 39.590 39.629 39.669 39.708 950
960 39.708 39.747 39.787 39.826 39.866 39.905 39.944 39.984 40.023 40.062 40.101 960
970 40.101 40.141 40.180 40.219 40.259 40.298 40.337 40.376 40.415 40.455 40.494 970
980 40.494 40.533 40.572 40.611 40.651 40.690 40.729 40.768 40.807 40.846 40.885 980
990 40.885 40.924 40.963 41.002 41.042 41.081 41.120 41.159 41.198 41.237 41.276 990
1000 41.276 41.315 41.354 41.393 41.431 41.470 41.509 41.548 41.587 41.626 41.665 1000
1010 41.665 41.704 41.743 41.781 41.820 41.859 41.898 41.937 41.976 42.014 42.053 1010
1020 42.053 42.092 42.131 42.169 42.208 42.247 42.286 42.324 42.363 42.402 42.440 1020
1030 42.440 42.479 42.518 42.556 42.595 42.633 42.672 42.711 42.749 42.788 42.826 1030
1040 42.826 42.865 42.903 42.942 42.980 43.019 43.057 43.096 43.134 43.173 43.211 1040
1050 43.211 43.250 43.288 43.327 43.365 43.403 43.442 43.480 43.518 43.557 43.595 1050
1060 43.595 43.633 43.672 43.710 43.748 43.787 43.825 43.863 43.901 43.940 43.978 1060
1070 43.978 44.016 44.054 44.092 44.130 44.169 44.207 44.245 44.283 44.321 44.359 1070
1080 44.359 44.397 44.435 44.473 44.512 44.550 44.588 44.626 44.664 44.702 44.740 1080
1090 44.740 44.778 44.816 44.853 44.891 44.929 44.967 45.005 45.043 45.081 45.119 1090
1100 45.119 45.157 45.194 45.232 45.270 45.308 45.346 45.383 45.421 45.459 45.497 1100
1110 45.497 45.534 45.572 45.610 45.647 45.685 45.723 45.760 45.798 45.836 45.873 1110
1120 45.873 45.911 45.948 45.986 46.024 46.061 46.099 46.136 46.174 46.211 46.249 1120
1130 46.249 46.286 46.324 46.361 46.398 46.436 46.473 46.511 46.548 46.585 46.623 1130
1140 46.623 46.660 46.697 46.735 46.772 46.809 46.847 46.884 46.921 46.958 46.995 1140
1150 46.995 47.033 47.070 47.107 47.144 47.181 47.218 47.256 47.293 47.330 47.367 1150
1160 47.367 47.404 47.441 47.478 47.515 47.552 47.589 47.626 47.663 47.700 47.737 1160
1170 47.737 47.774 47.811 47.848 47.884 47.921 47.958 47.995 48.032 48.069 48.105 1170
1180 48.105 48.142 48.179 48.216 48.252 48.289 48.326 48.363 48.399 48.436 48.473 1180
1190 48.473 48.509 48.546 48.582 48.619 48.656 48.692 48.729 48.765 48.802 48.838 1190
1200 48.838 48.875 48.911 48.948 48.984 49.021 49.057 49.093 49.130 49.166 49.202 1200
1210 49.202 49.239 49.275 49.311 49.348 49.384 49.420 49.456 49.493 49.529 49.565 1210
1220 49.565 49.601 49.637 49.674 49.710 49.746 49.782 49.818 49.854 49.890 49.926 1220
1230 49.926 49.962 49.998 50.034 50.070 50.106 50.142 50.178 50.214 50.250 50.286 1230
1240 50.286 50.322 50.358 50.393 50.429 50.465 50.501 50.537 50.572 50.608 50.644 1240
1250 50.644 50.680 50.715 50.751 50.787 50.822 50.858 50.894 50.929 50.965 51.000 1250
1260 51.000 51.036 51.071 51.107 51.142 51.178 51.213 51.249 51.284 51.320 51.355 1260
1270 51.355 51.391 51.426 51.461 51.497 51.532 51.567 51.603 51.638 51.673 51.708 1270
1280 51.708 51.744 51.779 51.814 51.849 51.885 51.920 51.955 51.990 52.025 52.060 1280
1290 52.060 52.095 52.130 52.165 52.200 52.235 52.270 52.305 52.340 52.375 52.410 1290
1300 52.410 52.445 52.480 52.515 52.550 52.585 52.620 52.654 52.689 52.724 52.759 1300
1310 52.759 52.794 52.828 52.863 52.898 52.932 52.967 53.002 53.037 53.071 53.106 1310
1320 53.106 53.140 53.175 53.210 53.244 53.279 53.313 53.348 53.382 53.417 53.451 1320
1330 53.451 53.486 53.520 53.555 53.589 53.623 53.658 53.692 53.727 53.761 53.795 1330
1340 53.795 53.830 53.864 53.898 53.932 53.967 54.001 54.035 54.069 54.104 54.138 1340
1350 54.138 54.172 54.206 54.240 54.274 54.308 54.343 54.377 54.411 54.445 54.479 1350
1360 54.479 54.513 54.547 54.581 54.615 54.649 54.683 54.717 54.751 54.785 54.819 1360
1370 54.819 54.852 54.886 1370
www.hannainst.com | 17.3
Thermoelectric Voltage in milliVolts
Reference Tables
17 Thermocouple Reference Tables N.I.S.T Rev. ITS-90
-350 -6.133 -6.126 -6.119 -6.113 -6.106 -6.099 -6.092 -6.085 -6.078 -6.071 -6.064 -350
-340 -6.064 -6.057 -6.049 -6.042 -6.035 -6.027 -6.020 -6.012 -6.004 -5.997 -5.989 -340
-330 -5.989 -5.981 -5.973 -5.965 -5.957 -5.949 -5.941 -5.933 -5.925 -5.917 -5.908 -330
-320 -5.908 -5.900 -5.891 -5.883 -5.874 -5.866 -5.857 -5.848 -5.840 -5.831 -5.822 -320
-310 -5.822 -5.813 -5.804 -5.795 -5.786 -5.776 -5.767 -5.758 -5.749 -5.739 -5.730 -310
-300 -5.730 -5.720 -5.711 -5.701 -5.691 -5.682 -5.672 -5.662 -5.652 -5.642 -5.632 -300
-290 -5.632 -5.622 -5.612 -5.602 -5.592 -5.581 -5.571 -5.561 -5.550 -5.540 -5.529 -290
-280 -5.529 -5.519 -5.508 -5.497 -5.487 -5.476 -5.465 -5.454 -5.443 -5.432 -5.421 -280
-270 -5.421 -5.410 -5.399 -5.388 -5.377 -5.365 -5.354 -5.343 -5.331 -5.320 -5.308 -270
-260 -5.308 -5.296 -5.285 -5.273 -5.261 -5.250 -5.238 -5.226 -5.214 -5.202 -5.190 -260
-250 -5.190 -5.178 -5.166 -5.153 -5.141 -5.129 -5.117 -5.104 -5.092 -5.079 -5.067 -250
-240 -5.067 -5.054 -5.042 -5.029 -5.016 -5.003 -4.991 -4.978 -4.965 -4.952 -4.939 -240
-230 -4.939 -4.926 -4.913 -4.900 -4.886 -4.873 -4.860 -4.847 -4.833 -4.820 -4.806 -230
-220 -4.806 -4.793 -4.779 -4.766 -4.752 -4.738 -4.724 -4.711 -4.697 -4.683 -4.669 -220
-210 -4.669 -4.655 -4.641 -4.627 -4.613 -4.599 -4.584 -4.570 -4.556 -4.542 -4.527 -210
-200 -4.527 -4.513 -4.498 -4.484 -4.469 -4.455 -4.440 -4.425 -4.411 -4.396 -4.381 -200
-190 -4.381 -4.366 -4.351 -4.336 -4.321 -4.306 -4.291 -4.276 -4.261 -4.246 -4.231 -190
-180 -4.231 -4.215 -4.200 -4.185 -4.169 -4.154 -4.138 -4.123 -4.107 -4.091 -4.076 -180
-170 -4.076 -4.060 -4.044 -4.029 -4.013 -3.997 -3.981 -3.965 -3.949 -3.933 -3.917 -170
-160 -3.917 -3.901 -3.885 -3.869 -3.852 -3.836 -3.820 -3.803 -3.787 -3.771 -3.754 -160
-150 -3.754 -3.738 -3.721 -3.705 -3.688 -3.671 -3.655 -3.638 -3.621 -3.604 -3.587 -150
-140 -3.587 -3.571 -3.554 -3.537 -3.520 -3.503 -3.486 -3.468 -3.451 -3.434 -3.417 -140
-130 -3.417 -3.400 -3.382 -3.365 -3.348 -3.330 -3.313 -3.295 -3.278 -3.260 -3.243 -130
-120 -3.243 -3.225 -3.207 -3.190 -3.172 -3.154 -3.136 -3.119 -3.101 -3.083 -3.065 -120
-110 -3.065 -3.047 -3.029 -3.011 -2.993 -2.975 -2.957 -2.938 -2.920 -2.902 -2.884 -110
-100 -2.884 -2.865 -2.847 -2.829 -2.810 -2.792 -2.773 -2.755 -2.736 -2.718 -2.699 -100
-90 -2.699 -2.680 -2.662 -2.643 -2.624 -2.605 -2.587 -2.568 -2.549 -2.530 -2.511 -90
-80 -2.511 -2.492 -2.473 -2.454 -2.435 -2.416 -2.397 -2.378 -2.359 -2.339 -2.320 -80
-70 -2.320 -2.301 -2.282 -2.262 -2.243 -2.223 -2.204 -2.185 -2.165 -2.146 -2.126 -70
-60 -2.126 -2.106 -2.087 -2.067 -2.048 -2.028 -2.008 -1.988 -1.969 -1.949 -1.929 -60
-50 -1.929 -1.909 -1.889 -1.869 -1.850 -1.830 -1.810 -1.790 -1.770 -1.749 -1.729 -50
-40 -1.729 -1.709 -1.689 -1.669 -1.649 -1.628 -1.608 -1.588 -1.568 -1.547 -1.527 -40
-30 -1.527 -1.507 -1.486 -1.466 -1.445 -1.425 -1.404 -1.384 -1.363 -1.343 -1.322 -30
-20 -1.322 -1.301 -1.281 -1.260 -1.239 -1.218 -1.198 -1.177 -1.156 -1.135 -1.114 -20
-10 -1.114 -1.094 -1.073 -1.052 -1.031 -1.010 -0.989 -0.968 -0.947 -0.926 -0.905 -10
0 -0.905 -0.883 -0.862 -0.841 -0.820 -0.799 -0.778 -0.756 -0.735 -0.714 -0.692 0
°F 0 1 2 3 4 5 6 7 8 9 10 °F
0 -0.692 -0.671 -0.650 -0.628 -0.607 -0.586 -0.564 -0.543 -0.521 -0.500 -0.478 0
10 -0.478 -0.457 -0.435 -0.413 -0.392 -0.370 -0.349 -0.327 -0.305 -0.284 -0.262 10
20 -0.262 -0.240 -0.218 -0.197 -0.175 -0.153 -0.131 -0.109 -0.088 -0.066 -0.044 20
30 -0.044 -0.022 0.000 0.022 0.044 0.066 0.088 0.110 0.132 0.154 0.176 30
40 0.176 0.198 0.220 0.242 0.264 0.286 0.308 0.330 0.353 0.375 0.397 40
50 0.397 0.419 0.441 0.463 0.486 0.508 0.530 0.552 0.575 0.597 0.619 50
60 0.619 0.642 0.664 0.686 0.709 0.731 0.753 0.776 0.798 0.821 0.843 60
70 0.843 0.865 0.888 0.910 0.933 0.955 0.978 1.000 1.023 1.045 1.068 70
80 1.068 1.090 1.113 1.136 1.158 1.181 1.203 1.226 1.249 1.271 1.294 80
90 1.294 1.316 1.339 1.362 1.384 1.407 1.430 1.453 1.475 1.498 1.521 90
100 1.521 1.543 1.566 1.589 1.612 1.635 1.657 1.680 1.703 1.726 1.749 100
110 1.749 1.771 1.794 1.817 1.840 1.863 1.886 1.909 1.931 1.954 1.977 110
120 1.977 2.000 2.023 2.046 2.069 2.092 2.115 2.138 2.161 2.184 2.207 120
130 2.207 2.230 2.253 2.276 2.298 2.321 2.344 2.367 2.390 2.413 2.436 130
140 2.436 2.459 2.483 2.506 2.529 2.552 2.575 2.598 2.621 2.644 2.667 140
150 2.667 2.690 2.713 .736 2.759 2.782 2.805 2.828 2.851 2.874 2.897 150
160 2.897 2.920 2.944 2.967 2.990 3.013 3.036 3.059 3.082 3.105 3.128 160
170 3.128 3.151 3.174 3.197 3.220 3.244 3.267 3.290 3.313 3.336 3.359 170
180 3.359 3.382 3.405 3.428 3.451 3.474 3.497 3.520 3.544 3.567 3.590 180
190 3.590 3.613 3.636 3.659 3.682 3.705 3.728 3.751 3.774 3.797 3.820 190
200 3.820 3.843 3.866 3.889 3.912 3.935 3.958 3.981 4.004 4.027 4.050 200
210 4.050 4.073 4.096 4.119 4.142 4.165 4.188 4.211 4.234 4.257 4.280 210
220 4.280 4.303 4.326 4.349 4.372 4.395 4.417 4.440 4.463 4.486 4.509 220
230 4.509 4.532 4.555 4.578 4.601 4.623 4.646 4.669 4.692 4.715 4.738 230
240 4.738 4.760 4.783 4.806 4.829 4.852 4.874 4.897 4.920 4.943 4.965 240
250 4.965 4.988 5.011 5.034 5.056 5.079 5.102 5.124 5.147 5.170 5.192 250
260 5.192 5.215 5.238 5.260 5.283 5.306 5.328 5.351 5.374 5.396 5.419 260
270 5.419 5.441 5.464 5.487 5.509 5.532 5.554 5.577 5.599 5.622 5.644 270
280 5.644 5.667 5.690 5.712 5.735 5.757 5.779 5.802 5.824 5.847 5.869 280
290 5.869 5.892 5.914 5.937 5.959 5.982 6.004 6.026 6.049 6.071 6.094 290
300 6.094 6.116 6.138 6.161 6.183 6.205 6.228 6.250 6.272 6.295 6.317 300
310 6.317 6.339 6.362 6.384 6.406 6.429 6.451 6.473 6.496 6.518 6.540 310
320 6.540 6.562 6.585 6.607 6.629 6.652 6.674 6.696 6.718 6.741 6.763 320
330 6.763 6.785 6.807 6.829 6.852 6.874 6.896 6.918 6.941 6.963 6.985 330
340 6.985 7.007 7.029 7.052 7.074 7.096 7.118 7.140 7.163 7.185 7.207 340
17.4 | www.hannainst.com
Thermoelectric Voltage in milliVolts
Reference Tables
N.I.S.T Rev. ITS-90 Thermocouple Reference Tables 17
Technical Tables
450 9.432 9.455 9.477 9.500 9.522 9.545 9.567 9.590 9.612 9.635 9.657 450
460 9.657 9.680 9.702 9.725 9.747 9.770 9.792 9.815 9.837 9.860 9.882 460
470 9.882 9.905 9.927 9.950 9.973 9.995 10.018 10.040 10.063 10.086 10.108 470
480 10.108 10.131 10.153 10.176 10.199 10.221 10.244 10.267 10.289 10.312 10.334 480
490 10.334 10.357 10.380 10.402 10.425 10.448 10.471 10.493 10.516 10.539 10.561 490
500 10.561 10.584 10.607 10.629 10.652 10.675 10.698 10.720 10.743 10.766 10.789 500
510 10.789 10.811 10.834 10.857 10.880 10.903 10.925 10.948 10.971 10.994 11.017 510
520 11.017 11.039 11.062 11.085 11.108 11.131 11.154 11.176 11.199 11.222 11.245 520
530 11.245 11.268 11.291 11.313 11.336 11.359 11.382 11.405 11.428 11.451 11.474 530
540 11.474 11.497 11.519 11.542 11.565 11.588 11.611 11.634 11.657 11.680 11.703 540
550 11.703 11.726 11.749 11.772 11.795 11.818 11.841 11.864 11.887 11.910 11.933 550
560 11.933 11.956 11.978 12.001 12.024 12.047 12.070 12.093 12.116 12.140 12.163 560
570 12.163 12.186 12.209 12.232 12.255 12.278 12.301 12.324 12.347 12.370 12.393 570
580 12.393 12.416 12.439 12.462 12.485 12.508 12.531 12.554 12.577 12.600 12.624 580
590 12.624 12.647 12.670 12.693 12.716 12.739 12.762 12.785 12.808 12.831 12.855 590
600 12.855 12.878 12.901 12.924 12.947 12.970 12.993 13.016 13.040 13.063 13.086 600
610 13.086 13.109 13.132 13.155 13.179 13.202 13.225 13.248 13.271 13.294 13.318 610
620 13.318 13.341 13.364 13.387 13.410 13.433 13.457 13.480 13.503 13.526 13.549 620
630 13.549 13.573 13.596 13.619 13.642 13.665 13.689 13.712 13.735 13.758 13.782 630
640 13.782 13.805 13.828 13.851 13.874 13.898 13.921 13.944 13.967 13.991 14.014 640
650 14.014 14.037 14.060 14.084 14.107 14.130 14.154 14.177 14.200 14.223 14.247 650
660 14.247 14.270 14.293 14.316 14.340 14.363 14.386 14.410 14.433 14.456 14.479 660
670 14.479 14.503 14.526 14.549 14.573 14.596 14.619 14.643 14.666 14.689 14.713 670
680 14.713 14.736 14.759 14.783 14.806 14.829 14.853 14.876 14.899 14.923 14.946 680
690 14.946 14.969 14.993 15.016 15.039 15.063 15.086 15.109 15.133 15.156 15.179 690
700 15.179 15.203 15.226 15.250 15.273 15.296 15.320 15.343 15.366 15.390 15.413 700
710 15.413 15.437 15.460 15.483 15.507 15.530 15.554 15.577 15.600 15.624 15.647 710
720 15.647 15.671 15.694 15.717 15.741 15.764 15.788 15.811 15.834 15.858 15.881 720
730 15.881 15.905 15.928 15.952 15.975 15.998 16.022 16.045 16.069 16.092 16.116 730
740 16.116 16.139 16.163 16.186 16.209 16.233 16.256 16.280 16.303 16.327 16.350 740
750 16.350 16.374 16.397 16.421 16.444 16.468 16.491 16.514 16.538 16.561 16.585 750
760 16.585 16.608 16.632 16.655 16.679 16.702 16.726 16.749 16.773 16.796 16.820 760
770 16.820 16.843 16.867 16.890 16.914 16.937 16.961 16.984 17.008 17.031 17.055 770
780 17.055 17.078 17.102 17.125 17.149 17.173 17.196 17.220 17.243 17.267 17.290 780
790 17.290 17.314 17.337 17.361 17.384 17.408 17.431 17.455 17.478 17.502 17.526 790
800 17.526 17.549 17.573 17.596 17.620 17.643 17.667 17.690 17.714 17.738 17.761 800
810 17.761 17.785 17.808 17.832 17.855 17.879 17.902 17.926 17.950 17.973 17.997 810
820 17.997 18.020 18.044 18.068 18.091 18.115 18.138 18.162 18.185 18.209 18.233 820
830 18.233 18.256 18.280 18.303 18.327 18.351 18.374 18.398 18.421 18.445 18.469 830
840 18.469 18.492 18.516 18.539 18.563 18.587 18.610 18.634 18.657 18.681 18.705 840
850 18.705 18.728 18.752 18.776 18.799 18.823 18.846 18.870 18.894 18.917 18.941 850
860 18.941 18.965 18.988 19.012 19.035 19.059 19.083 19.106 19.130 19.154 19.177 860
870 19.177 19.201 19.224 19.248 19.272 19.295 19.319 19.343 19.366 19.390 19.414 870
880 19.414 19.437 19.461 19.485 19.508 19.532 19.556 19.579 19.603 19.626 19.650 880
890 19.650 19.674 19.697 19.721 19.745 19.768 19.792 19.816 19.839 19.863 19.887 890
900 19.887 19.910 19.934 19.958 19.981 20.005 20.029 20.052 20.076 20.100 20.123 900
910 20.123 20.147 20.171 20.194 20.218 20.242 20.265 20.289 20.313 20.336 20.360 910
920 20.360 20.384 20.407 20.431 20.455 20.479 20.502 20.526 20.550 20.573 20.597 920
930 20.597 20.621 20.644 20.668 20.692 20.715 20.739 20.763 20.786 20.810 20.834 930
940 20.834 20.857 20.881 20.905 20.929 20.952 20.976 21.000 21.023 21.047 21.071 940
950 21.071 21.094 21.118 21.142 21.165 21.189 21.213 21.236 21.260 21.284 21.308 950
960 21.308 21.331 21.355 21.379 21.402 21.426 21.450 21.473 21.497 21.521 21.544 960
970 21.544 21.568 21.592 21.616 21.639 21.663 21.687 21.710 21.734 21.758 21.781 970
980 21.781 21.805 21.829 21.852 21.876 21.900 21.924 21.947 21.971 21.995 22.018 980
990 22.018 22.042 22.066 22.089 22.113 22.137 22.160 22.184 22.208 22.232 22.255 990
1000 22.255 22.279 22.303 22.326 22.350 22.374 22.397 22.421 22.445 22.468 22.492 1000
1010 22.492 22.516 22.540 22.563 22.587 22.611 22.634 22.658 22.682 22.705 22.729 1010
1020 22.729 22.753 22.776 22.800 22.824 22.847 22.871 22.895 22.919 22.942 22.966 1020
1030 22.966 22.990 23.013 23.037 23.061 23.084 23.108 23.132 23.155 23.179 23.203 1030
1040 23.203 23.226 23.250 23.274 23.297 23.321 23.345 23.368 23.392 23.416 23.439 1040
1050 23.439 23.463 23.487 23.510 23.534 23.558 23.581 23.605 23.629 23.652 23.676 1050
1060 23.676 23.700 23.723 23.747 23.771 23.794 23.818 23.842 23.865 23.889 23.913 1060
1070 23.913 23.936 23.960 23.984 24.007 24.031 24.055 24.078 24.102 24.126 24.149 1070
1080 24.149 24.173 24.197 24.220 24.244 24.267 24.291 24.315 24.338 24.362 24.386 1080
1090 24.386 24.409 24.433 24.457 24.480 24.504 24.527 24.551 24.575 24.598 24.622 1090
1100 24.622 24.646 24.669 24.693 24.717 24.740 24.764 24.787 24.811 24.835 24.858 1100
1110 24.858 24.882 24.905 24.929 24.953 24.976 25.000 25.024 25.047 25.071 25.094 1110
1120 25.094 25.118 25.142 25.165 25.189 25.212 25.236 25.260 25.283 25.307 25.330 1120
1130 25.330 25.354 25.377 25.401 25.425 25.448 25.472 25.495 25.519 25.543 25.566 1130
1140 25.566 25.590 25.613 25.637 25.660 25.684 25.708 25.731 25.755 25.778 25.802 1140
1150 25.802 25.825 25.849 25.873 25.896 25.920 25.943 25.967 25.990 26.014 26.037 1150
1160 26.037 26.061 26.084 26.108 26.132 26.155 26.179 26.202 26.226 26.249 26.273 1160
1170 26.273 26.296 26.320 26.343 26.367 26.390 26.414 26.437 26.461 26.484 26.508 1170
1180 26.508 26.532 26.555 26.579 26.602 26.626 26.649 26.673 26.696 26.720 26.743 1180
1190 26.743 26.767 26.790 26.814 26.837 26.861 26.884 26.907 26.931 26.954 26.978 1190
www.hannainst.com | 17.5
Thermoelectric Voltage in milliVolts
Reference Tables
17 Thermocouple Reference Tables N.I.S.T Rev. ITS-90
1300 29.315 29.338 29.362 29.385 29.408 29.431 29.455 29.478 29.501 29.524 29.548 1300
1310 29.548 29.571 29.594 29.617 29.640 29.664 29.687 29.710 29.733 29.757 29.780 1310
1320 29.780 29.803 29.826 29.849 29.873 29.896 29.919 29.942 29.965 29.989 30.012 1320
1330 30.012 30.035 30.058 30.081 30.104 30.128 30.151 30.174 30.197 30.220 30.243 1330
1340 30.243 30.267 30.290 30.313 30.336 30.359 30.382 30.405 30.429 30.452 30.475 1340
1350 30.475 30.498 30.521 30.544 30.567 30.590 30.613 30.637 30.660 30.683 30.706 1350
1360 30.706 30.729 30.752 30.775 30.798 30.821 30.844 30.868 30.891 30.914 30.937 1360
1370 30.937 30.960 30.983 31.006 31.029 31.052 31.075 31.098 31.121 31.144 31.167 1370
1380 31.167 31.190 31.213 31.236 31.260 31.283 31.306 31.329 31.352 31.375 31.398 1380
1390 31.398 31.421 31.444 31.467 31.490 31.513 31.536 31.559 31.582 31.605 31.628 1390
1400 31.628 31.651 31.674 31.697 31.720 31.743 31.766 31.789 31.812 31.834 31.857 1400
1410 31.857 31.880 31.903 31.926 31.949 31.972 31.995 32.018 32.041 32.064 32.087 1410
1420 32.087 32.110 32.133 32.156 32.179 32.202 32.224 32.247 32.270 32.293 32.316 1420
1430 32.316 32.339 32.362 32.385 32.408 32.431 32.453 32.476 32.499 32.522 32.545 1430
1440 32.545 32.568 32.591 32.614 32.636 32.659 32.682 32.705 32.728 32.751 32.774 1440
1450 32.774 32.796 32.819 32.842 32.865 32.888 32.911 32.933 32.956 32.979 33.002 1450
1460 33.002 33.025 33.047 33.070 33.093 33.116 33.139 33.161 33.184 33.207 33.230 1460
1470 33.230 33.253 33.275 33.298 33.321 33.344 33.366 33.389 33.412 33.435 33.458 1470
1480 33.458 33.480 33.503 33.526 33.548 33.571 33.594 33.617 33.639 33.662 33.685 1480
1490 33.685 33.708 33.730 33.753 33.776 33.798 33.821 33.844 33.867 33.889 33.912 1490
1500 33.912 33.935 33.957 33.980 34.003 34.025 34.048 34.071 34.093 34.116 34.139 1500
1510 34.139 34.161 34.184 34.207 34.229 34.252 34.275 34.297 34.320 34.343 34.365 1510
1520 34.365 34.388 34.410 34.433 34.456 34.478 34.501 34.524 34.546 34.569 34.591 1520
1530 34.591 34.614 34.637 34.659 34.682 34.704 34.727 34.750 34.772 34.795 34.817 1530
1540 34.817 34.840 34.862 34.885 34.908 34.930 34.953 34.975 34.998 35.020 35.043 1540
1550 35.043 35.065 35.088 35.110 35.133 35.156 35.178 35.201 35.223 35.246 35.268 1550
1560 35.268 35.291 35.313 35.336 35.358 35.381 35.403 35.426 35.448 35.471 35.493 1560
1570 35.493 35.516 35.538 35.560 35.583 35.605 35.628 35.650 35.673 35.695 35.718 1570
1580 35.718 35.740 35.763 35.785 35.807 35.830 35.852 35.875 35.897 35.920 35.942 1580
1590 35.942 35.964 35.987 36.009 36.032 36.054 36.076 36.099 36.121 36.144 36.166 1590
1600 36.166 36.188 36.211 36.233 36.256 36.278 36.300 36.323 36.345 36.367 36.390 1600
1610 36.390 36.412 36.434 36.457 36.479 36.501 36.524 36.546 36.568 36.591 36.613 1610
1620 36.613 36.635 36.658 36.680 36.702 36.725 36.747 36.769 36.792 36.814 36.836 1620
1630 36.836 36.859 36.881 36.903 36.925 36.948 36.970 36.992 37.014 37.037 37.059 1630
1640 37.059 37.081 37.104 37.126 37.148 37.170 37.193 37.215 37.237 37.259 37.281 1640
1650 37.281 37.304 37.326 37.348 37.370 37.393 37.415 37.437 37.459 37.481 37.504 1650
1660 37.504 37.526 37.548 37.570 37.592 37.615 37.637 37.659 37.681 37.703 37.725 1660
1670 37.725 37.748 37.770 37.792 37.814 37.836 37.858 37.881 37.903 37.925 37.947 1670
1680 37.947 37.969 37.991 38.013 38.036 38.058 38.080 38.102 38.124 38.146 38.168 1680
1690 38.168 38.190 38.212 38.235 38.257 38.279 38.301 38.323 38.345 38.367 38.389 1690
1700 38.389 38.411 38.433 38.455 38.477 38.499 38.522 38.544 38.566 38.588 38.610 1700
1710 38.610 38.632 38.654 38.676 38.698 38.720 38.742 38.764 38.786 38.808 38.830 1710
1720 38.830 38.852 38.874 38.896 38.918 38.940 38.962 38.984 39.006 39.028 39.050 1720
1730 39.050 39.072 39.094 39.116 39.138 39.160 39.182 39.204 39.226 39.248 39.270 1730
1740 39.270 39.292 39.314 39.335 39.357 39.379 39.401 39.423 39.445 39.467 39.489 1740
1750 39.489 39.511 39.533 39.555 39.577 39.599 39.620 39.642 39.664 39.686 39.708 1750
1760 39.708 39.730 39.752 39.774 39.796 39.817 39.839 39.861 39.883 39.905 39.927 1760
1770 39.927 39.949 39.970 39.992 40.014 40.036 40.058 40.080 40.101 40.123 40.145 1770
1780 40.145 40.167 40.189 40.211 40.232 40.254 40.276 40.298 40.320 40.341 40.363 1780
1790 40.363 40.385 40.407 40.429 40.450 40.472 40.494 40.516 40.537 40.559 40.581 1790
1800 40.581 40.603 40.624 40.646 40.668 40.690 40.711 40.733 40.755 40.777 40.798 1800
1810 40.798 40.820 40.842 40.864 40.885 40.907 40.929 40.950 40.972 40.994 41.015 1810
1820 41.015 41.037 41.059 41.081 41.102 41.124 41.146 41.167 41.189 41.211 41.232 1820
1830 41.232 41.254 41.276 41.297 41.319 41.341 41.362 41.384 41.405 41.427 41.449 1830
1840 41.449 41.470 41.492 41.514 41.535 41.557 41.578 41.600 41.622 41.643 41.665 1840
1850 41.665 41.686 41.708 41.730 41.751 41.773 41.794 41.816 41.838 41.859 41.881 1850
1860 41.881 41.902 41.924 41.945 41.967 41.988 42.010 42.032 42.053 42.075 42.096 1860
1870 42.096 42.118 42.139 42.161 42.182 42.204 42.225 42.247 42.268 42.290 42.311 1870
1880 42.311 42.333 42.354 42.376 42.397 42.419 42.440 42.462 42.483 42.505 42.526 1880
1890 42.526 42.548 42.569 42.591 42.612 42.633 42.655 42.676 42.698 42.719 42.741 1890
1900 42.741 42.762 42.783 42.805 42.826 42.848 42.869 42.891 42.912 42.933 42.955 1900
1910 42.955 42.976 42.998 43.019 43.040 43.062 43.083 43.104 43.126 43.147 43.169 1910
1920 43.169 43.190 43.211 43.233 43.254 43.275 43.297 43.318 43.339 43.361 43.382 1920
1930 43.382 43.403 43.425 43.446 43.467 43.489 43.510 43.531 43.552 43.574 43.595 1930
1940 43.595 43.616 43.638 43.659 43.680 43.701 43.723 43.744 43.765 43.787 43.808 1940
1950 43.808 43.829 43.850 43.872 43.893 43.914 43.935 43.957 43.978 43.999 44.020 1950
1960 44.020 44.041 44.063 44.084 44.105 44.126 44.147 44.169 44.190 44.211 44.232 1960
1970 44.232 44.253 44.275 44.296 44.317 44.338 44.359 44.380 44.402 44.423 44.444 1970
1980 44.444 44.465 44.486 44.507 44.528 44.550 44.571 44.592 44.613 44.634 44.655 1980
1990 44.655 44.676 44.697 44.719 44.740 44.761 44.782 44.803 44.824 44.845 44.866 1990
2000 44.866 44.887 44.908 44.929 44.950 44.971 44.992 45.014 45.035 45.056 45.077 2000
2010 45.077 45.098 45.119 45.140 45.161 45.182 45.203 45.224 45.245 45.266 45.287 2010
2020 45.287 45.308 45.329 45.350 45.371 45.392 45.413 45.434 45.455 45.476 45.497 2020
2030 45.497 45.518 45.539 45.560 45.580 45.601 45.622 45.643 45.664 45.685 45.706 2030
2040 45.706 45.727 45.748 45.769 45.790 45.811 45.832 45.852 45.873 45.894 45.915 2040
17.6 | www.hannainst.com
Thermoelectric Voltage in milliVolts
Reference Tables
N.I.S.T Rev. ITS-90 Thermocouple Reference Tables 17
Technical Tables
2150 47.983 48.003 48.024 48.044 48.065 48.085 48.105 48.126 48.146 48.167 48.187 2150
2160 48.187 48.208 48.228 48.248 48.269 48.289 48.310 48.330 48.350 48.371 48.391 2160
2170 48.391 48.411 48.432 48.452 48.473 48.493 48.513 48.534 48.554 48.574 48.595 2170
2180 48.595 48.615 48.635 48.656 48.676 48.696 48.717 48.737 48.757 48.777 48.798 2180
2190 48.798 48.818 48.838 48.859 48.879 48.899 48.919 48.940 48.960 48.980 49.000 2190
2200 49.000 49.021 49.041 49.061 49.081 49.101 49.122 49.142 49.162 49.182 49.202 2200
2210 49.202 49.223 49.243 49.263 49.283 49.303 49.323 49.344 49.364 49.384 49.404 2210
2220 49.404 49.424 49.444 49.465 49.485 49.505 49.525 49.545 49.565 49.585 49.605 2220
2230 49.605 49.625 49.645 49.666 49.686 49.706 49.726 49.746 49.766 49.786 49.806 2230
2240 49.806 49.826 49.846 49.866 49.886 49.906 49.926 49.946 49.966 49.986 50.006 2240
2250 50.006 50.026 50.046 50.066 50.086 50.106 50.126 50.146 50.166 50.186 50.206 2250
2260 50.206 50.226 50.246 50.266 50.286 50.306 50.326 50.346 50.366 50.385 50.405 2260
2270 50.405 50.425 50.445 50.465 50.485 50.505 50.525 50.545 50.564 50.584 50.604 2270
2280 50.604 50.624 50.644 50.664 50.684 50.703 50.723 50.743 50.763 50.783 50.802 2280
2290 50.802 50.822 50.842 50.862 50.882 50.901 50.921 50.941 50.961 50.981 51.000 2290
2300 51.000 51.020 51.040 51.060 51.079 51.099 51.119 51.139 51.158 51.178 51.198 2300
2310 51.198 51.217 51.237 51.257 51.276 51.296 51.316 51.336 51.355 51.375 51.395 2310
2320 51.395 51.414 51.434 51.453 51.473 51.493 51.512 51.532 51.552 51.571 51.591 2320
2330 51.591 51.611 51.630 51.650 51.669 51.689 51.708 51.728 51.748 51.767 51.787 2330
2340 51.787 51.806 51.826 51.845 51.865 51.885 51.904 51.924 51.943 51.963 51.982 2340
2350 51.982 52.002 52.021 52.041 52.060 52.080 52.099 52.119 52.138 52.158 52.177 2350
2360 52.177 52.197 52.216 52.235 52.255 52.274 52.294 52.313 52.333 52.352 52.371 2360
2370 52.371 52.391 52.410 52.430 52.449 52.468 52.488 52.507 52.527 52.546 52.565 2370
2380 52.565 52.585 52.604 52.623 52.643 52.662 52.681 52.701 52.720 52.739 52.759 2380
2390 52.759 52.778 52.797 52.817 52.836 52.855 52.875 52.894 52.913 52.932 52.952 2390
2400 52.952 52.971 52.990 53.010 53.029 53.048 53.067 53.087 53.106 53.125 53.144 2400
2410 53.144 53.163 53.183 53.202 53.221 53.240 53.260 53.279 53.298 53.317 53.336 2410
2420 53.336 53.355 53.375 53.394 53.413 53.432 53.451 53.470 53.490 53.509 53.528 2420
2430 53.528 53.547 53.566 53.585 53.604 53.623 53.643 53.662 53.681 53.700 53.719 2430
2440 53.719 53.738 53.757 53.776 53.795 53.814 53.833 53.852 53.871 53.890 53.910 2440
2450 53.910 53.929 53.948 53.967 53.986 54.005 54.024 54.043 54.062 54.081 54.100 2450
2460 54.100 54.119 54.138 54.157 54.176 54.195 54.214 54.233 54.252 54.271 54.289 2460
2470 54.289 54.308 54.327 54.346 54.365 54.384 54.403 54.422 54.441 54.460 54.479 2470
2480 54.479 54.498 54.517 54.536 54.554 54.573 54.592 54.611 54.630 54.649 54.668 2480
2490 54.668 54.687 54.705 54.724 54.743 54.762 54.781 54.800 54.819 54.837 54.856 2490
2500 54.856 54.875 54.894
www.hannainst.com | 17.7
17 Hanna Online
Hanna Online
hannainst.com backpacklab.com
17.8 | www.hannainst.com
18
www.hannainst.com | 18.1
18
18.2 | www.hannainst.com
18
www.hannainst.com | 18.3
18
18.4 | www.hannainst.com
18
www.hannainst.com | 18.5
18
18.6 | www.hannainst.com
18
www.hannainst.com | 18.7
18
18.8 | www.hannainst.com
18
www.hannainst.com | 18.9
18
18.10 | www.hannainst.com
18
www.hannainst.com | 18.11
18