Documente Academic
Documente Profesional
Documente Cultură
RM300
Rotary Mixer
Cat® C11 Engine with ACERT® Technology Operating Weight (with ROPS and cab)
Gross Power (SAE J1995) 261 kW/355 hp with universal rotor 24 450 kg
Net Power (ISO 9249) at 1800 rpm 260 kW/354 hp with soil rotor 23 920 kg
Rotor Width 2438 mm with combination rotor 24 640 kg
Rotor Depth (maximum) 508 mm
Productivity, Serviceability and Comfort in a Durable Package
The RM300 offers enhanced production capabilities, optimized performance, simplified
service and exceptional operator comfort.
2
Rotor Drive Rear Wheel-Drive Mixing Chamber
A direct-drive mechanical transmission The optional rear wheel-drive propel Mixing chamber allows the rotor to
drives the rotor and provides three system features a dedicated propel move independently so that the
rotor speeds for maximum performance pump to provide separate balanced capacity of the chamber actually
in a variety of materials and cutting hydraulic flow to both the rear drive increases in deeper cuts to allow
depths. Heavy-duty shear disc or motors. This system enables the better material mixing and excellent
optional torque limiter protects rotor operator to achieve superior tractive gradation. Machine weight is well
drive components from torsional effort for soil stabilization applications distributed to provide stability in
stress and shock loads. pg. 8 that require maximum cutting depth the cut for uniform depth control.
and that are also high in moisture pg. 9
content. pg. 8
Rotor Options
With a choice of three rotor options,
the RM300 can be configured for
different applications and depth
specifications. The universal rotor is
intended primarily to pulverize asphalt
layers. The soil rotor is intended
primarily for soil stabilization.
The combination rotor is intended
primarily for use in soil stabilization
with secondary application in light cuts
of asphalt reclamation. pg. 10
3
C11 Engine with ACERT Technology
A combination of innovations working at the point of combustion, ACERT Technology
optimizes engine performance while meeting European EU Stage IIIA emission regulations
for off-road applications.
4
Operator’s Station
Ergonomic design emphasizes operator comfort, visibility and easy operation.
The sliding platform slides side-to-side to reduce operator fatigue for increased productivity.
Operational Controls
All machine controls, switches and gauges are positioned to minimize operator fatigue and
maximize productivity.
5
Sliding Cab
Optional cab can increase machine utilization and provides greater year-round comfort in
extreme environment conditions. The cab is fully pressurized and includes air conditioning.
2
3
10
6
Electronic Control Modules
Reliable field-proven technology makes machine operation simple and self-diagnostics
simplifies troubleshooting.
Propel System
Hydrostatic drive provides balanced tractive effort to each drive motor.
7
Rear Wheel-Drive
Optional rear wheel-drive includes a separate hydraulic pump and large displacement
motors on each rear wheel. The system propels the machine with all-wheel drive.
Rotor Drive
Maximum production with high reliability. The mechanical rotor drive system provides
three rotor speeds for maximum performance in a variety of materials and cutting depths.
8
Mixing Chamber
Mixing chamber is a heavy-duty hood with large volume to handle deep mixing.
Ensures depth control, proper sizing and thorough blending of reclaimed materials.
9
Rotor Selection
Choice of three rotor designs for different applications and depth specifications.
Tools are mounted in drive-in, knock-out holders for quick and easy replacement.
10
Serviceability
Less time on maintenance means more time on the job.
Daily service points are accessible from Self-lubricating rotor drive chains S•O•SSM ports allow for simple fluid
ground level and are grouped on one in sealed chain cases partially filled collection of engine oil, engine coolant
side of the engine. Hinged ground level with oil. and hydraulic oil.
side panels open wide for total access
Electronic Control Module (ECM). Secure hose routing. Polyethylene
to engine components. Lower side
ECM monitors machine systems and routing blocks reduce rubbing and
panels can easily be removed for even
provides self-diagnostics for operator increase service life.
greater access.
or service personnel.
Nylon braided wrap and all-weather
Cooling package. A multi-row modular
Warning levels. Three warning levels connectors ensure electrical system
design, stacked in series provides easy
alert operator to conditions on integrity. Electrical wiring is colour-
access for cleaning and service.
the machine that require attention. coded, numbered and labeled with
A modular stacked cooling system
Encourages repair before major failure. component identifiers to simplify
provides more efficient cooling of
Level One – a flashing gauge indicator troubleshooting.
individual systems and makes
and a flashing alert indicator light.
replacement and routine cleaning easier. Maintenance-free Caterpillar batteries
Level Two – level one warning plus
Electronically controlled on-demand are mounted on the side of the machine
the warning action lamp flashing.
variable speed cooling fan provides and are accessible from ground level.
Level Three – level two warning plus
the lowest overall noise levels and high Cat batteries are specifically designed
the warning action horn sounds.
ambient operation capability. for maximum cranking power and
Visual indicators. Allows easy check of protection against vibration.
Hydraulic rotor hood tilt rotates hood
engine coolant, rotor axle and hydraulic
forward for convenient access to rotor Machine is Product Link wire-ready.
oil level and air restriction indicator.
for inspection and tool maintenance. The Caterpillar Product Link System
Quick-connect hydraulic test ports (CPLS) ensures maximum uptime and
Hinged service doors open wide on
simplify system diagnostics. minimum repair costs by simplifying
sides of engine, rotor hood and on top
tracking of equipment fleets. Provides
deck for access to power train and rotor Ecology drains provide an environmental
automatic machine location and hour
drive components. method to drain fluids. They are included
updates. Can be obtained through your
on the radiator, engine oil pan, hydraulic
local Caterpillar dealer.
and fuel tank.
11
Engine Propel System
The Caterpillar® C11 engine with Front wheel drive is standard. Rear Infinitely variable machine speed
ACERT® Technology is a six cylinder, wheel-assist is optional to provide on- and direction of travel controlled by
turbocharged air-to-air after-cooled demand all-wheel drive for increased propel lever.
diesel engine. The engine meets tractive effort. Operator can activate by Speed control dial allows the operator
European EU Stage IIIA engine a switch on the front control console. to set the maximum working speed so
emission regulations. that when the propel lever is placed in
Features
Front wheels are hydrostatically
the full forward position, the machine
Gross Power 1800 rpm
will return to the pre-set speed.
SAE J1995 261 kW/355 hp driven by two dual displacement Load sensing system, controlled by
Rated Net Power 1800 rpm piston-type motors. A separate
Electronic Control Module (ECM),
variable displacement, piston-type
ISO 9249 260 kW/354 hp matches propel speed to load on
pump with electronic displacement
EEC 80/1269 260 kW/354 hp the rotor.
control supplies pressurized flow.
Bore 130 mm
Flow divider control valve provides
Planetary gear reduction on each
equal hydraulic oil flow to each drive
Stroke 140 mm front wheel end.
Front drive motors have two
motor to increase tractive effort in
Displacement 11.1 liters slippery conditions. Operator can
swashplate positions allowing
All engine horsepower (hp) are activate by a switch on the front
operation at either maximum torque
metric including front page. control console. The rear propel
for work or greater speed for moving
The power ratings are tested under system also includes a flow divider
around the job site.
the reference conditions for the Gear selection controlled electrically
control valve if machine is equipped
specific standard. with the rear wheel-assist option.
by a two-position switch on the
Net power advertised is the power operator’s console. Max. Speeds (forward and reverse):
available at the flywheel when the Rear wheels are hydrostatically
Working 4.3 km/h
engine is equipped with an alternator, driven by two radial piston-type
air cleaner, muffler and fan at Roading 9.7 km/h
motors. A separate variable
minimum speed. displacement, piston-type pump
The engine provides a torque of with electronic displacement control
1384 Nm. supplies pressurized flow.
Derating is not required up to an
altitude of 2100 m.
Electrical wiring is colour-coded, joined to rear bolster with welded-in provides dynamic braking during
numbered, wrapped in vinyl-coated trunion and spherical plain bearings to normal operation.
nylon braid and labeled with component allow rear bolster oscillation of 15°.
Parking Brake Features
identifiers. The starting system provides Spring-applied/hydraulically-released
1365 cold cranking amps (cca). The
multiple disc type brake mounted on
system includes a 95-amp alternator.
each gear reducer. Secondary brakes
are activated by a button on the
operator’s console, loss of hydraulic
pressure in the brake circuit or when
the engine is shut down.
Propel pumps are destroked when
on the operator’s console. the raise/lower switch. Visual depth provides rear wheel steering mode.
Single strand, high strength rotor gauge easily seen from operator’s
Steering Modes
drive chains on both sides are station. Front steer only – controlled by a
contained in heavy-duty chain cases AUTOMATIC mode automatically
hand metering unit, maintained by
partially filled with oil. controls rotor depth to a preset
closed-loop control. When equipped
Shear disc or optional torque limiter cutting depth. Setting cutting depth is
with four mode steering, ECM
protect rotor drive components. easily accomplished first in manual
automatically aligns rear wheels to
mode by a switch on the operator’s
Rotor drive Chain the center position for straight
console.
Transmission Mechanical tracking.
TRAVEL mode selection
Rear steer – controlled by a toggle
Clutch Hydraulic automatically raises rotor and hood
switch, maintained by closed-loop
Rotor Speeds at 1800 engine rpm to a preset travel height.
control.
First 106 rpm Crab – front and rear wheels turn
Rotor Specifications
Cutting width 2438 mm Number of tools
Cutting depth Universal 200
Universal 457 mm Soil 238
Soil 508 mm Combination 114
Combination 508 mm Tool spacing (tip)
Drum diameter Universal 15 mm
Universal 1525 mm Soil 11.5 mm
Soil 1625 mm Combination 32 mm
Combination 1625 mm
C B
E G F
H
mm mm
A Overall length 1000 F Height at cab (if equipped) 3400
B Overall machine width 3000 G Height at handrail 3370
C Width at rear wheels 2820 H Wheelbase 6320
D Rotor hood width 2730 I Ground clearance 720
E Height at ROPS 3500 Inside turning radius 3900
Roll Over Protective Structure (ROPS). Four Mode Steering. ECM monitors Water Spray System. Accurately adds
The two-post structure that bolts directly the position of the steering mode switch water to processed material. System
onto flanges welded to the mainframe. and controls the rear wheels to provide includes a operator interface panel,
The structure meets ISO 3471. automatic crab and coordinated hydraulic filter, EDC controlled
The structure can be field installed. steering. (Includes automatic rotor hydraulic pump, a 379 - 1895 liters
depth control.) per minute vane-type centrifugal pump,
Falling Object Protective Structure
in-line flow meter, spray bar with
(FOPS). Bolts directly to the ROPS Hydraulically Operated Front Door.
nozzles and hydraulically operated
which provides Level 1 protection Allows the operator to control the
single valve spray bar shut-off.
and also serves as a sun canopy. opening of the front door from the
The structure meets ISO 3449. operator’s station. Offers better control Powertrain Guard. Includes three bolt-
The structure can be field installed. of gradation in reclamation and on steel guards to provide protection
increased versatility in soil stabilization for the engine crankcase and hydraulic
Sliding Cab. includes a rotating cloth
because the machine is able to work in hoses at front axle area.
seat, sound absorbing headliner, left and
both directions.
right side lockable doors, tinted glass, air Universal Rotor. Designed for use
conditioning, heater/defroster, dual front Friction Torque Limiter. Protects rotor in asphalt reclamation and features
and rear windshield wipers and rubber drive train from high torque loads in breakaway bolt-on tool holders.
floor mat. The cab is also radio-ready the event the rotor strikes an Maximum cutting depth is 457 mm.
and includes a power converter, antenna immovable object. The limiter slips
Soil Rotor. Designed for use in soil
with cable, two speakers and momentarily without interrupting
stabilization and features weld-on tool
a headliner location for mounting. machine operation.
holders. Maximum cutting depth is
Rear Wheel-Drive. propels the machine Working Light Package. Includes six 508 mm.
with on-demand all-wheel drive in adjustable halogen floodlights,
Combination Rotor. Designed primarily
the work mode to increase tractive two front-facing, two rear-facing and
for use in soil stabilization with
effort. Highly recommended for soil two facing each rotor chamber door.
secondary application in light cuts of
stabilization applications. Includes Two red tail lamps, eight amber and
road reclamation and features bolt-on
separate propel pump, two radial piston two red reflectors are also included.
tool holders. Maximum cutting depth is
hydraulic drive motors, flow divider
Roading Light Package. Includes two 508 mm.
and free wheeling valve. The rear wheels
front-facing headlights, two amber
freewheel when rear wheel-drive is not
running lamps, four amber turn signal/
engaged.
hazard lamps and a slow moving
Automatic Rotor Depth Control. vehicle sign. Light package used for
ECM automatically controls rotor highway transport purposes only.
depth to a preset cutting depth. Setting
Warning Beacon Light. Includes an
cutting depth is easily accomplished first
amber rotating beacon mounted on
in manual mode by a switch on
a retractable pole and mount.
the operator’s console. Actual rotor
height and depth are displayed on Mirror Package. Includes an adjustable
the electronic control panel. mirror mounted on both sides of the
Includes four mode steering. machine for improved visibility to the
rear and along the sides of the machine.
For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at
www.cat.com
Materials and specifications are subject to change without notice. Featured machines in photos
may include additional equipment. See your Caterpillar dealer for available options.
CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow” and the POWER EDGE trade dress as well as
HEHG3301-02 (07/2007) hr corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.