Documente Academic
Documente Profesional
Documente Cultură
www.siemens.com.sg/ad
Revision 31.10.2007
Sitrain Singapore
About sitrain sitrain Singapore
State-of-the-art training
sets are the key to excellent
training. A trainee/trainer
ratio of 2 to 1 ensures a
maximum involvement of
each participant.
Our scheduled courses Center in Singapore is also the Re-
gional Training Partner for SIMATIC
tomers, all our training courses are control systems. PCS7 courses are
For S7, SIMATIC STEP-by-STEP (ST- grounds and different industries with
Step) is the starting point for STEP7 different job scope, it is interesting to
know that this actually improves the
learning, and it forms the pre-
learning process. Candidates are able
3
requisite for most of our advanced
topic courses. Upon the successful of to think out of the box, and take
this course, you can move on to any home with them working ideas which
of our courses that suit your needs have been employed successfully in
Sitrain Singapore
tified Profibus, SIMATIC Redundancy, On-demand courses
SIMATIC WinCC, etc. and custom-tailored
training
Being a portable language within our
SIMATIC range, learning S7 allows
For courses not listed in our schedule,
you to work with both our S7-300
these will be available on-demand,
and S7-400 ranges of PLCs.
subjected to a minimum class size.
The number of participants in our
The Center offers also a WinCC sys-
SIMATIC training is limited to 8. Our
tem course, for users of our SCADA
trainers can deal intensively with
solution and WinCC Flexible course
questions and desires of the
for users of our HMI Panels (Touch
Panel/Operator Panel). The Training
Sitrain Singapore
individual participant. In each case the theoretical knowledge. And since
two participants work together on an all theory is known to be grey, the
equipment place during the training practical exercises occupy up to half
courses. This is developed in line with of our course time. In everyday work-
standard usage and consists of a pro- ing life, you can immediately apply
gramming device, automation equip- what you have learnt.
ment and a plant model. Optimal We train you on state-of-the-art, di-
training success is guaranteed by the dactically designed training units. On
small number of participants and the them, you can train to your heart's
practical use of equipment. We un- desire, until you feel absolutely confi-
derstand the work nature and envi- dent. At the end of every course we
ronment of our customers. confirm which knowledge and which
The Center offers also custom- capabilities you have acquired in an
tailored training, and these can be official certificate, recognized world-
conducted either at Siemens Center wide.
or on-site, to suit your exact needs.
You have the possibility of specifying
emphasis and topic areas according Registration
to your needs.
4
Please contact us via phone or email
Experienced Trainers to check on the vacancy status for
your chosen courses. Do give us a call
before faxing in your registration.
This will ensure prompt process of
your application. The registration
form can be found on the last page of
this brochure or on our website.
Constant quality
control
5
In our training every participant has
the possibility of communications to
our trainers. Your openly and hon-
estly opinion on our trainers is very
important. We strive to consider your
Sitrain Singapore
improvement suggestions with the
organization of the following meet-
ings.
Sitrain Singapore
Training Courses
SIMATIC PLC
SIMATIC PCS7
(Programmable Logic
(DCS System)
Controller)
RFID
(Radio Frequency Motor Protection & Control
Identification)
Sitrain Singapore
SIMATIC PCS7 Batch ST-PCS7BTH 5 4,200
SIMATIC PCS7 Process Safety ST-PCS7PS 3 2,800
SINUMERIC CNC
SIMATIC S7 Programming 2
SIMATIC S7 Step-by-Step
SIMATIC S5
SIMATIC S7-200
Courses in Detail
Course Title SIMATIC STEP-by-STEP
Sitrain Singapore
Course Title SIMATIC S7 Programming 2
Course Code ST-STEP2
Course Duration 5 days
Requirements SIMATIC Step-by-Step (ST-STEP)
Description The course is directed at personnel engaged in project engi-
neering tasks who would like to become familiar with the ex-
tended programming possibilities of SIMATIC S7.
After the course, the participant will be able to structure and
create advanced S7 programs, making it possible to efficiently
work with STEP 7 and thus reduce the engineering phase.
The course uses a 'hands-on' practical approach to reinforce the
theoretical aspects of the training.
Sitrain Singapore
Content • Using structograms as a method for program design
• Functions, function blocks and multi-instances
(with examples using IEC Timer/Counter)
• Jump commands and Accumulator operations
• Configuration of Breakpoints as a debugging tool
• Memory Indirect addressing
• Using Error organization blocks to evaluate PROFIBUS slave
downtime
• Error management with error organization blocks
• Analyzing synchronous errors with organization blocks
• Analyzing S7 diagnostic data
• Writing user messages in the Diagnostic Buffer
• Troubleshooting and error messages with an HMI device
Sitrain Singapore
Course Title SIMATIC TI505 Maintenance and Prgramming
Course Code ST-TI505
Course Duration 3 days
Requirements Background in Automation
Description This course is for both engineering and maintenance person-
nel responsible for designing, commissioning, installing or
maintaining the SIMATIC 505 family Programmable Logic Con-
troller (PLC).
This entry-level course covers the tasks necessary to support
the design, modification, start-up and maintenance of a typi-
cal SIMATIC 505 PLC system. Participants work with TISOFT
software throughout the course.
Hands-on lab exercises challenge participants to use the pro-
gramming and diagnostic tools available in SIMATIC 505 sys-
tems.
Sitrain Singapore
Content • PLC Fundamental concepts and Terminology
• Hardware Overview
• Program Management
• Discrete Program Elements
• Word Program Elements
• Analog Program Elements
• Documentation
• PLC Diagnostics
Courses in Detail
Sitrain Singapore
• Alarm Logging, Recipes, Scripting, Reporting, Screen Navigation,
etc.)
• Create different user groups and user administration
• Create Multi-Lingual Project
• Create Faceplates
• Use advanced features of WinCC Flexible (e.g. Smart Access,
Smart Service, OPC, etc.)
• Integrate project into STEP7 environment
Sitrain Singapore
Course Title SIMATIC WinCC
14
SIMATIC NET
SIMATIC S7 Communications
15
Certified Profibus Installer (CPI)
Sitrain Singapore
Certified Profibus DP Engineer (CPE)
16
Requirements None
Description An essential course for electrical engineers and technicians need-
ing to upgrade their skills in the installation and testing of
PROFIBUS networks.
Content • Basic PROFIBUS network technology, station types and address-
ing, network configuration and start-up
• Causes, effects and avoidance of transmissionline reflections
and the importance of correct linetermination
• Network and segment size limitations and the effect of trans-
mission rate
• Common wiring and layout pitfalls, modern cable and connec-
tor systems
• Use of repeaters, couplers, link modules and fibreoptic seg-
ments
• Wiring and installation testing and the use of bus test tools
• Interference pickup (EMC), cable routing and earthing consid-
erations
17
Course Title Certified PROFIBUS - DP Engineer
Course Code PROF-CPE
Sitrain Singapore
sons who are acknowledged by an official exam.
The Standard Certified PROFIBUS Engineer course is an intensive
hands-on and theoretical 3,5-days training program. On the last
day there will be an exam. After passing the exam, the attendee
gets the title ‘Certified Engineer' and will be officially registered.
The registration is valid for 3 years. Extension is granted after a
fresh up course. This course covers in details the technology,
design and operation of PROFIBUS-DP network.
Content Networking Basics
• Token passing
• Masters and slaves
• Baudrates
• Message formats
• SAPs
• OSI model
Sitrain Singapore
The technology of RS 485
• Electrical specifications and measurability
• Topology
• Number of connections
• Stubs
• Termination
• Cable specifications and types
• Redundancy
• Grounding and shielding
Network components
• Connectors
• Repeaters
• Bus terminals
• OLMs
• Active termination
• DP/DP couplers
Test and measurement equipment
• Handheld tools
• Busmonitors
• Oscilloscopes
• Trigger tools
Bus parameters and cycle times
• Tslot, Max_TSDR, etc.
• Watchdogs
• Repeats
• Min_Slave_Intervall
• HSA
The technology of DP
• Diagnosis, Parameters and Configuration
18 • Sync and Freeze
• GSD files
• Cyclic and acyclic
• Interface with PLC/DCS
Practical exercises
• Creating networks with the help of configuration tools
• Using the ProfiTrace Analyzer (Live List, logging, analyzing)
• Setting bus parameters
• Class 2 functions
• Generating and reading diagnostics
• Troubleshooting (cable break, double address, faulty configura-
tion)
Sitrain Singapore
Parameters and profiles
• The structure of cyclical read and control values
• Status value
• Profile GSDs and Ident numbers
• Parameters sets from a variety of instruments
• Difference and applications od FDT/DTM/DDL
Practical exercises
• Creating networks with the help of configuration tools
• Setting parameters at instruments
• Generating and reading diagnostics
• Measurement with an oscilloscope (signal– and noise analysis)
• Using the ProfiTrace Analyzer and PA Probe
• Calculating currents and voltages
Requirements None
Description This training is fully concentrated on those who install and main-
tain PROFIBUS installations. This module supplies a complete
knowledge package that can be put into practice immediately.
The attendee will learn how to analyze, localize and solve a prob-
lem. Theory about cabling, shielding, grounding and measure-
ment tools is the basis of this knowledge. With the help of practi-
cal exercises, the participant will put theory into practice.
Practical exercises
• Protocol analysis with the ProfiTrace Analyzer
• Signal analysis with the Handyscope
• Cable measurements with a multi-meter and BT200
SIMATIC PCS7 (DCS System)
21
Sitrain Singapore
Sitrain Singapore Courses in Detail
Content • Define the terms and procedural model according to the ISA
S88.01
• Define hardware and software requirements to implement SI-
MATIC Batch
• Perform batch planning and configuration
• Use the Batch Control Center
• Create a recipe
• Define and configure batch materials
• Generate standard reports and messages
• Run and manage a batch
23
Course Title SIMATIC PCS7 Process Safety
Sitrain Singapore
benefits of the Siemens Safety Instrumented System (S7-400F/FH).
The course begins with an introduction to Safety System concepts
and goes on to explain how the features of the S7400F/FH system
can be used to build an effective emergency shutdown system or
high availability control system. The Safety Matrix, a programming
tool available for use with the S7400F/FH system, is also covered.
Content • Use the S7400F/FH diagnostics and safety features to meet op-
erational requirements
• Establish the proper hardware configuration of the CPU and sig-
nal modules to ensure appropriate system response to a danger-
ous condition
• Use the Safety Library blocks to create a safety shutdown pro-
gram
• Use the Safety Matrix programming tool to configure a shut-
down system
Sitrain Singapore
RFID (Radio Frequency Identification)
Course Title CompTIA RFID + Certification
Course Code ST-RFID4U
Course Duration 4 days
Requirements General Computer Knowledge
Description This course is organized together by Siemens and RFID4U (http://
www.rfid4u.com), a worldwide leader in vendor neutral RFID
learning solutions.
This course is designed for all Auto-ID professionals, RF engi-
neers, system integrators and users who need to gain critical
skills to install, maintain or troubleshoot RFID-based systems.
Courses in Detail
Course Title
Course Code
MASTERDRIVES Service and Commissioning
SD-MD
Sitrain Singapore
Course Duration 4 days
Requirements Basic knowledge in Drives
Description This course is designed for Service and Commissioning personnel
to configure the MASTER DRIVE VC (Vector Control). Simple ex-
amples help the trainees to obtain the necessary basic knowledge
to allow them to use the system quickly and easily for their own
applications.
Sitrain Singapore
Content • Introduction to Master Drives
• Motor theory
• Inverter theory
• Programming of the unit
• Basic configuring steps via PMU-keypad
• Using OP1s-keypad unit Basic fault finding
• Communication using Simovis software package
• Upreading and Downloading of backup files
• Configuring of PROFIBUS-DP and SIMOLINK
• Operating Instructions (including fault list)
• Function diagrams
• Parameter List
• Practical exercises
Sitrain Singapore
• Drives optimization using commissioning tools
• NC-/PLC-interface structure and interface signals
• PLC-basic interface program, PLC functions
• Structure of the PLC user program
• Commissioning of the integrated SIMATIC S7-300
• Software updates/upgrades
• Practical training for commissioning and fault detection on ex-
tensive training units with digital feed and spindle drives
Sitrain Singapore
Motor Protection & Control
28
sitrain Course Registration Form
( Please complete this form legible or in capitals, fax to A&D sitrain 6490-6989)
Contact
Contact Name Company
Course
Course Title Course Code Starting Date
1
Participant Job Title
Participants
2
Participant Job Title
4
Participant Job Title
Billing Address
Billing
Telephone Fax
Email
Billing Address (cont.)