Documente Academic
Documente Profesional
Documente Cultură
¹ The CID is a diagnostic code that indicates which circuit is faulty. Reed Switch: A switch whose contacts are controlled by a magnet. A magnet closes the
contacts of a normally open reed switch; it opens the contacts of a normally closed reed switch.
C4.4 Industrial Engine Sender: A component that is used with a temperature or pressure gauge. The sender
Event Codes measures the temperature or pressure. Its resistance changes to give an indication to
Event Code
Machine Control
Condition
Electrical System T
the gauge of the temperature or pressure.
E172 High Air Filter Restriction Relay (Magnetic Switch): A relay is an electrical component that is activated by electricity.
E194 High Exhaust Temperature 4441-UP It has a coil that makes an electromagnet when current flows through it. The
electromagnet can open or close the switch part of the relay.
E232 High Fuel / Water Separator Water Level
E360 Low Engine Oil Pressure
E361 High Engine Coolant Temperature
Solenoid: A solenoid is an electrical component that is activated by electricity. It has a
coil that makes an electromagnet when current flows through it. The electromagnet
E362 Engine Overspeed
can open or close a valve or move a piece of metal that can do work.
E396 High Fuel Rail Pressure
E398 Low Fuel Rail Pressure
MAGNETIC LATCH SOLENOID - A magnetic latch solenoid is an electrical component that is
E539 High Intake Manifold Air Temperature
activated by electricity and held latched by a permanent magnet. It has two coils (latch and unlatch)
E2143 Low Engine Coolant Temperature
that make electromagnet when current flows through them. It also has an internal switch that places
the latch coil circuit open at the time the coil latches.
J692
RENR9964-02
Secondary speed/timing sensor
P692
P402
P691
P103
P100
P228
P200
Intake manifold pressure sensor
12 Page,
P200
P511
-
Starting and charging Injector 4
245-1043
J23
+
101-RD A
229-BK B
Relay Fuse C
944-OR D
945-BR E Diagnostic connector
30
50 Y793-YL F 113-4630 230-4013 230-4011
Y792-PK G
C G C
H
RED
J
Resistors 3 2 1
237-0227 238-8245
System Overview
J691
J692
P691 P692
GRAY
P691 3 2 1
P692
J691 J692
P511
P402
P200 SENSOR / ACTUATOR SUPPLY
INTERNAL ELECTRICAL CONNECTION
TO SURFACE OF COMPONENT
J23 P511
J1 COLOR ABBREVIATIONS PART NUMBER PLUG OR JACK CONNECTOR
12 Page,
P103
P402 BR BROWN 238-8245 P511 CONNECTION TO WASTEGATE
GN GREEN 8T-8736 J23 DIAGNOSTIC CONNECTOR
P532 BU BLUE Note: 1 The oil pressure sensor can be
install in one of two different position.
P100
7 6 5 4
P201 3 2 1