Documente Academic
Documente Profesional
Documente Cultură
C0.5
8.2-10.2 bkW/11.0-13.7 bhp @ 2800-3600 rpm
FEATURES
Emissions Broad Application Range
Ratings are available for Europe and, depending on Industry leading range of factory configurable ratings and
applicable emission standards, may be introduced in options for agricultural, materials-handling, construction,
other regulated areas. Nonroad engines less than mining, aircraft ground support, and other industrial
19 kW (25 hp) are not currently subject to EU emission applications.
standards. Package Size
Reliable, Quiet, and Durable Power Ultra-compact package size ensures ease of installation as
World-class manufacturing capability and processes well as exceptional power density.
coupled with proven core engine designs assure Low-Cost Maintenance
reliability, quiet operation, and many hours of productive Single-side servicing improves ease of maintenance and
life. simplifies the servicing routine. Service intervals at 500
High Performance hours are standard.
Delivers impressive performance throughout a wide Testing
speed range while maintaining low operating costs. Every Cat® engine is quality tested to ensure proper
Fuel Efficiency engine performance.
Fuel consumption optimized to match operating cycles of
World-class Product Support Offered Through Global Cat
a wide range of equipment and applications.
Dealer Network
• Scheduled maintenance
• Customer Support Agreements (CSA)
• Caterpillar Extended Service Coverage (ESC)
• Superior dealer service network
• Extended dealer service network through the Cat
Industrial Service Distributor (ISD) program
STANDARD EQUIPMENT
Air Inlet Fuel System
Inlet manifold with choice of inlets Fuel injection pump, spin-on fuel filter, Electronic
Control System Shut-off Solenoid (ESOS)
Alternator 12V 14 amp, starter motor 12V, glow plug Lube System
starting aid Closed circuit breather, spin-on lube oil filter, lube oil
Cooling System pressure switch, lube oil sump
Belt-driven coolant pump, coolant temperature switch, General
choice of cooling fans Cast iron engine block, cast iron exhaust manifold — side
Flywheel and Flywheel Housing outlet, cold start capability to -20°C (-4°F), or move to lube
SAE No. 6 1/2 flywheel, choice of SAE No. 5 or standard system 35° maximum single for continuous operation.
backplate flywheel housing
Web Site: For additional information on all your power requirements, visit www.cat-industrial.com.
LEHH6352-04 Page 1 of 2
Industrial Engine C0.5
8.2-10.2 bkW/11.0-13.7 bhp @ 2800-3600 rpm
PERFORMANCE DATA
DIMENSIONS
Naturally Aspirated — 3600 rpm
35
25
Torque (N•m)
Torque (lb-ft)
30 22
(3)
19
25
11
14
10
(1) (2)
Power (bkW)
Power (bhp)
8
10 (1) Length 407 mm (16.0 in)
7
(2) Width 371 mm (14.6 in)
6
(3) Height 523 mm (20.6 in)
5
6
Note: Dimensions depend on final specifications.
1400 1600 1800 2000 2200 2400 2600 2800 3000 3200 3400 3600
Materials and specifications are subject to change without notice. The International System of Units (SI) is used in this publication.
CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow” and the “Power Edge” trade dress, as well as corporate
and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
©2014 Caterpillar
LEHH6352-04 (6-14) All rights reserved.