Documente Academic
Documente Profesional
Documente Cultură
OWNER’S MANUAL
Maintenance & Assembly Instructions
IMPORTANT: KEEP THIS MANUAL FOR FUTURE REFERENCE
TuffStuff Fitness International Inc. continually engages in research related to product improvements. Please take the time to carefully read through
this owner’s manual thoroughly. Instructions contained in this owner’s manual are not intended to cover all details or variations possible with
equipment, or to cover every contingency that may be met in conjunction with assembly, installation, operation, maintenance or troubleshooting of
the equipment. Even though we have prepared this owner’s manual with extreme care, neither the manufacturer nor the author can accept
responsibility for any errors in, or omission from, the information given. Should additional information be required, or should situations arise that are
not covered by this owner’s manual, the matter should be directed to Customer Service at TuffStuff Fitness International Inc. in Chino, California.
80
76
81
83
84
74
83
76
75
72
79
73
75 76 74 73
72 84
80
83
24
It is extremely important that the BE ALERT! Sign shown to the
BE ALERT! left be installed in plain view of the unit.
Registration Allow ample space around the machine for safe unrestricted use and
To avoid unnecessary delays on warranty parts and to insure that a easier access.
permanent record of your purchase is on file with our company, be
sure to register online at http://www.tuffstuffitness.com or mail to Insert all bolts in the same direction. For aesthetic appearance, insert all
address shown below within 10 days of purchase. bolts in the same direction unless specified (in text or illustration) to do
otherwise.
Obtaining Service Leave room for adjustments. Do not fully tighten fasteners until in-
Please use this Owner’s Manual as your guide to all parts included in structed in the assembly steps to do so (to prevent any difficulty with
your shipment. When ordering parts, you must specify the part number alignment of parts during the assembly process). When not instructed,
and description from this owner’s manual. Use only genuine TuffStuff tighten fasteners such as bolts, nuts and screws so the unit is stable, but
replacement parts when servicing the equipment. Failure to do leave room for adjustments.
so will void warranty and could result in serious injury or death.
For information about product operation or service: Assembly Tips
Phone: 909-629-1600 Toll Free 888-884-8275 Read all “Notes” on each page before beginning each step.
Fax: 909-629-4967 While you may be able to assemble the SXT-LP using the illustrations
E-mail: service@tuffstuff.net or service1@tuffstuff.net only, IMPORTANT safety notes and other tips are included in the text.
Hours: M–F 8:00 – 4:30 PST
Some pieces may have extra holes that you will not use. Use only those
Or write to: TuffStuff Fitness International Inc.
holes indicated in the instructions and illustration.
Customer Service
13971 Norton Avenue, Chino, CA 91710 NOTE: With so many assembled parts, proper alignment and
Retain this Owner’s Manual for future reference when ordering adjustment is critical. While tightening the nuts and bolts,
service or parts. To assist you better, please be prepared to be sure to leave room for final adjustments.
provide the following information: CAUTION: Obtain assistance from TFI if you have difficulty
1. Model Number 2. Place of Purchase assembling the SXT-LP. Please do not attempt to
3. Serial Number 4. Part # and Description complete the assembly as this could result in equipment
failure and serious injuries to the users.
Required Tools
The basic tools that you will need to assemble the SXT-LP but are not Symbols & Description
limited to:
• 9/16” , 3/4”, 1/2” combination wrenches
• Adjustable wrench
• Ratchet wrench with 9/16” , 3/4”, 1/2” sockets
• External retaining ring pliers
• Rubber mallet, measuring tape & utility knife
• Super Lube® spray lubricant and grease
• Windex or household glass cleaner
Loosely Fasten
Assembly Requirements Loosely tighten all hardware in this step. DO NOT fully tighten. Some
Follow these installation requirements when assembling the SXT-LP. Use component(s) may need pre-assembly and or alignment during the
assembly process.
the overhead view on the Content Page to layout your floor plan before
assembling.
Set up the SXT-LP on a clean, solid, flat surface. A smooth, flat surface
under the machine helps keep it level. Fully Fasten
Wrench tighten all hardware in this step.
Leg Press Option for XT Gym Series www.tuffstuffitness.com 11
Inspection/Maintenance
Perform regular maintenance (see Inspection Label). Pay special attention to areas most susceptible to wear and tear, including
but not limited to cables, pulleys and rubber grip. TFI recommends you maintain a service contract with a TFI Authorized Dealer or a
Professional Service Company approved by TFI. Keep a service log of all maintenance and repair activities. Extra copies can be downloaded
from our website www.tuffstuffitness.com
WARRANTY REPAIRS
DATE REPLACEMENT REPAIRS INSPECTED BY
IMPORTANT NOTE:
DAMAGED OR WORN CABLE (AS SHOWN ABOVE) MAY DAMAGE THE PULLEY(S). YOU MUST INSPECT THE
PULLEYS AT THIS TIME FOR WEAR AND TEAR. REPLACE IF NEEDED.
Leg Press Option for XT Gym Series www.tuffstuffitness.com 13
Step 1 SXT-LP+AXT-225
NOTE:
1. It is strongly recommended that two people participate in the assembly of this unit.
2. Some parts not shown for clarity.
Step 1 Assembly List
3. If AXT-225 unit was previously assembled, it may be
Item # Description Qty.
necessary to remove the AXT-225 weight shields. 5 CROSS BRACE 1
31 FLAT WASHER SAE Z/P 1/2” 4
37 HEX HEAD CAP SCREW GR-5 Z/P 1/2-13 X 3 1/4 2
65 NYLON INSERT LOCK NUT Z/P 1/2-13 2
31
65
37
31
5
Loosely Tighten
70% NOTE:
Wire string will be used to guide
Loosely Tighten the cable on step 6. Do not remove.
Loosely tighten all hardware in this step.
14 www.tuffstuffitness.com Leg Press Option for XT Gym Series
Step 1 SXT-LP+SXT-550
NOTE:
Step 1 Assembly List
1. It is strongly recommended that two people
Item # Description Qty.
5 CROSS BRACE 1 participate in the assembly of this unit.
31 FLAT WASHER SAE Z/P 1/2” 4
37 HEX HEAD CAP SCREW GR-5 Z/P 1/2-13 X 3 1/4 2
65 NYLON INSERT LOCK NUT Z/P 1/2-13 2
65
31
37
31
NOTE:
Loosely Tighten Wire string will be used to guide
the cable on step 6. Do not remove.
70%
Loosely Tighten
Loosely tighten all hardware in this step.
Leg Press Option for XT Gym Series www.tuffstuffitness.com 15
Step 2
Step 2 Assembly List
Item # Description Qty.
5 CROSS BRACE 1
*10 MAIN FRAME 1
32 FLAT WASHER SAE Z/P 3/8” 4
36 HEX HEAD CAP SCREW GR-5 Z/P 3/8-16 X 1 4
57 SPLIT LOCK WASHER Z/P 3/8” 4
*10
36
57
32
5
NOTE
Wire string will be used to guide
the cable on step 6. Do not remove. 36
57
32
Fully Tighten
100%
Fully Tighten
Wrench tighten all hardware in this and
previous loosely tighten steps.
16 www.tuffstuffitness.com Leg Press Option for XT Gym Series
Step 3
Step 3 Assembly List
Item # Description Qty.
*4 CARRIAGE 1
9 LINEAR SHAFT 2
Note:
1. Slide linear shaft into carriage.
*4
9
Rear View
*4
9 9
Loosely Tighten
70%
Loosely Tighten
Loosely tighten all hardware in this step.
Leg Press Option for XT Gym Series www.tuffstuffitness.com 17
Step 4
Step 3 Assembly List
Item # Description Qty.
*4 CARRIAGE 1
9 LINEAR SHAFT 2
28 HEX HEAD CAP SCREW GR-5 Z/P 3/8-16 X 1 1/4 2
57 SPLIT LOCK WASHER Z/P 3/8” 2
60 FLAT WASHER Z/P 3/8 ID X 1 1/2 OD X 3/16 2
NOTE:
1. Two people required for this step.
*4
60
57
28
28
57
60
42
62
Fully Tighten
100%
Fully Tighten
Wrench tighten all hardware in this and
previous loosely tighten steps.
18
85
58
52
18
63 G
F
A D
23
32
32
43 42 26
63 62
62
42
17
85
58 17
52
63
F
B
A D
23
32
32
43 42 26
63 62
62
42
50
30
6
32
42
*7
60
42
25
32
32 25
14
25
22
32
22
Note: 64 3
After completing this step adjust the cable by loosening the finish hex nut #64. Adjust the
Cable Adjuster #3 in/out to give the cable the proper tension. Retighten nut #64.
26 www.tuffstuffitness.com Leg Press Option for XT Gym Series
Parts List
SXT-LP_REV1
COLOR CHART
GRAY= SUB-ASSEMBLY PARTS
BLACK= HARDWARE
SXT-LP
Parts List
ItemȱNo. Description Rev. PartȱNo. Qty. ItemȱNo. Description Rev. PartȱNo. Qty.
1 ADJUSTABLEȱTUBE 0 UP7767 1 42 NYLONȱINSERTȱTHINȱPATTERNȱLOCKȱNUTȱZ/Pȱ3/8Ȭ16 BNH2026 12
2 BACKȱPAD 0 UP9077 1 43 NYLONȱPULLEYȱ3/8ȱXȱ1ȱXȱ6ȱBLACK BNH2298 1
3 CABLEȱADJUSTER 0 UP6236 1 44 PLASTICȱINSERTȱCAPȱ1ȱXȱ2ȱ10Ȭ14ȱGAȱW/NOTCH BNH3361 2
4 CARRIAGE 0 UP7769 1 45 PLASTICȱINSERTȱCAPȱ2ȈȱSQȱ10Ȭ14ȱGAȱW/NOTCH BNH3360 1
5 CROSSȱBRACE 0 UP7768 1 46 PLASTICȱINSERTȱDOMEȱCAPȱELLIPTICALȱ2ȱXȱ4 BNH3350 6
6 FOOTȱPLATE 0 UP6242 1 47 PLASTICȱTUBEȱGLIDEȱ2ȱXȱ1ȱXȱ8ȱ(HF1651600) BNH1874 2
7 HANDLES 0 UP7773 1 48 RAILȱWHEELȱ.50ȱXȱ2.16ȱRDȱXȱ2.52 BNH2472 4
8 LINEARȱSHAFTȱHOUSING 0 UP8423 1 49 RAILȱWHEELȱ.50ȱXȱ2.16ȱRDȱXȱ2.52ȱ(1ȱBUSHING)ȱ BNH4320 2
9 LINEARȱSHAFT 0 UP8400 2 50 RUBBERȱFOOTȱPLATEȱCOVER BNH1716 1
10 MAINȱFRAME 0 UP7775 1 51 RUBBERȱGRIPȱ1.1875ȱIDȱXȱ.125ȱXȱ11 BNH3340 2
11 PLATEȱ1/4ȱXȱ2ȱ3/4ȱRD 0 UP7866 1 52 SOCKETȱCAPȱSCREWȱZ/Pȱ3/8Ȭ16ȱXȱ1ȱ1/4 BNH2362 1
12 RAILȱWHEELȱAXLE 0 UP7772 1 53 SOCKETȱCAPȱSCREWȱZ/Pȱ3/8Ȭ16ȱXȱ2ȱ5/8 BNH3373 2
13 RELEASEȱHANDLE 0 UP7766 1 54 SOCKETȱSETȱSCREWȱZ/Pȱ10Ȭ32ȱXȱ1/8 BNH2088 1
14 SEATȱPAD 0 UP9078 1 55 SPLITȱLOCKȱWASHERȱZ/Pȱ1/2Ȉ BNH0572 7
15 SIDEȱCOVERȱPLATEȱLT 0 UP7778 1 56 SPLITȱLOCKȱWASHERȱZ/Pȱ1/4 BNH3337 1
16 SIDEȱCOVERȱPLATEȱRT 0 UP7779 1 57 SPLITȱLOCKȱWASHERȱZ/Pȱ3/8Ȉ BNH2520 11
17 LEGȱPRESSȱCABLEȱ3/16ȈȱXȱ234Ȉȱ(SXTȬLP+SXTȬ550) 0 UP7777 1 58 STRAPȱBRACKETȱ20ȱ#SF20ȱSTAINLESSȱSTEEL BNH0562 1
18 LEGȱPRESSȱCABLEȱ3/16ȈȱXȱ213Ȉȱ(SXTȬLP+AXTȬ225) 0 UP7774 1 59 URETHANEȱBUMPERȱ1ȱ3/4 BNH0229 2
19 BLKȱNYLONȱPULLEYȱ12.5MMȱXȱ26.3MMȱXȱ114MM BNH3352 1 60 FLATȱWASHERȱZ/Pȱ3/8ȱIDȱXȱ1ȱ1/2ȱODȱXȱ3/16 BNH3343 2
20 BRONZEȱBUSHINGȱSAEȱ841ȱ(302033)ȱ.502X.628ȱXȱ1/2ȱXȱ7/8ȱXȱ1/8Ȉ BNH0528 2 61 ALUMINUMȱCAPȱ1.040ȈȱRDȱ(026Ȭ01M0937) BNH3082 2
21 BUTTONȱHEADȱSOCKETȱCAPȱSCREWȱGRȬ8ȱZ/Pȱ1/4Ȭ20ȱXȱ3/4 BNH2995 1 62 OVALȱWASHERȱZ/Pȱ3/8Ȉ BNH3349 6
22 BUTTONȱHEADȱSOCKETȱCAPȱSCREWȱGRȬ8ȱZ/Pȱ3/8Ȭ16ȱXȱ1ȱ1/4 BNH2034 2 63 BLKȱNYLONȱPULLEYȱ12.5MMȱXȱ26.3MMȱXȱ90MM BNH3355 2
23 BUTTONȱHEADȱSOCKETȱCAPȱSCREWȱGRȬ8ȱZ/Pȱ3/8Ȭ16ȱXȱ1ȱ3/4 BNH2426 2 64 FINISHEDȱHEXȱNUTȱZ/Pȱ1/2Ȭ13 BNH0206 1
24 ALERTȱSIGNȱFORȱHOMEȱ8ȱ1/2ȱXȱ11 BNH3139 1 65 NYLONȱINSERTȱLOCKȱNUTȱZ/Pȱ1/2Ȭ13 BNH2029 2
25 BUTTONȱHEADȱSOCKETȱCAPȱSCREWȱGRȬ8ȱZ/Pȱ3/8Ȭ16ȱXȱ3 BNH2673 4 66 PULLȱPINȱLIGHTȱSPRINGȱ17/32ȱXȱ1ȱ1/4ȱKȬ105 BNH3374 1
26 BUTTONȱHEADȱSOCKETȱCAPȱSCREWȱGRȬ8ȱZ/Pȱ3/8Ȭ16ȱXȱ4ȱ1/2 BNH2437 1 67 PULLȱPINȱNUTȱ25/64ȱXȱ3/4Ȭ10ȱKȬ103 BNH0181 1
27 BUTTONȱHEADȱSOCKETȱCAPȱSCREWȱZ/Pȱ3/8Ȭ16ȱXȱ1 BNH2033 3 68 PULLȱPINȱAXLEȱ1/2ȱXȱ2ȱ9/16 BNH3359 1
28 HEXȱHEADȱCAPȱSCREWȱGRȬ5ȱZ/Pȱ3/8Ȭ16ȱXȱ1ȱ1/4 BNH2038 4 69 YELLOWȱGRIPȱ1/2ȱXȱ4ȱ BNH3059 1
29 ELLIPTICALȱRUBBERȱSHOE BNH3323 2 70 TFIȱEMBLEMȱ1.88ȱHIGHȱXȱ1.98ȱWIDEȱBLUEȱANDȱCHROME BNH4304 2
30 FLATȱHEADȱSOCKETȱCAPȱSCREWȱZ/Pȱ3/8Ȭ16ȱXȱ2ȱ3/4 BNH2229 2 71 LABELȬCAUTIONȱADJUSTȱLEVELER BNH2967 1
31 FLATȱWASHERȱSAEȱZ/Pȱ1/2Ȉ BNH2031 10 72 LABELȬCAUTIONȱCHECKPULLȱPINȱISȱFULLY...ȱ1ȱ1/2ȱXȱ1ȱ3/8 BNH2912 1
32 FLATȱWASHERȱSAEȱZ/Pȱ3/8Ȉ BNH2030 23 73 LABELȬDANGERȱCHECKȱRETAININGȱNUT...1.5ȱXȱ1 BNH3146 1
33 FLATȱWASHERȱUSSȱZ/Pȱ1/4Ȉ BNH2105 1 74 LABELȬDANGERȱUSEȱTHISȱEQUIPMENTȱONLY...ȱ BNH2903 1
34 HEXȱHEADȱCAPȱSCREWȱGRȬ5ȱZ/Pȱ1/2Ȭ13ȱXȱ1ȱ1/2 BNH2171 2 75 LABELȬIMPORTANTȱADJUSTȱCABLEȱTENSIONȱHERE BNH2924 1
35 HEXȱHEADȱCAPȱSCREWȱGRȬ5ȱZ/Pȱ1/2Ȭ13ȱXȱ4ȱ1/4 BNH2101 4 76 LABELȬIMPORTANTȱFORȱSMOOTHȱPERFORMANCE... BNH2916 2
36 HEXȱHEADȱCAPȱSCREWȱGRȬ5ȱZ/Pȱ3/8Ȭ16ȱXȱ1 BNH2037 4 77 LABELȬINSPECTIONSȱRECOMMENDEDȱINSPECTION…ȱ BNH3155 1
37 HEXȱHEADȱCAPȱSCREWȱGRȬ5ȱZ/Pȱ1/2Ȭ13ȱXȱ3ȱ1/4 BNH4199 2 78 LABELȬSXTȬLPȱEXERCISEȱCHART BNH3168 1
38 HEXȱHEADȱCAPȱSCREWȱGRȬ5ȱZ/Pȱ3/8Ȭ16ȱXȱ4ȱ3/4 BNH2063 2 79 LABELȬTFIȱSERIALȱNO.ȱ2.5ȱXȱ1.5 BNH3147 1
39 LEVERȱADJUSTMENTȱM10 BNH3362 1 80 LABELȬWARNINGȱKEEPȱBODY,ȱHANDS...ȱ1ȱ1/2ȱXȱ2ȱ5/8 BNH2909 2
40 LEVERȱADJUSTMENTȱNUTȱM10 BNH3363 1 81 LABELȬWARNINGȱSERIOUSȱINJURYȱORȱDEATHȱ BNH3157 1
41 SINGLEȱSTRANDȱCONNECTINGȱLINKȱ#40 BNH0066 1 82 LABELȬWARRANTYȱHOMEȱLIFETIME BNH3156 1
46
70
74
80 46
75 55
64 3
81
82
29 46 71
40 79
39
10
70
29
54 51
80
71 8
76
54 46
76 42
31
Pre Assembled Components
15 47
48
48 19
42
49 21 56 33 20 49 16
31
73
68 12
54
45
11 66
32 53
55
57 67
35
www.tuffstuffitness.com
27
41 20 69
41 72
31
13 55
41 35
31
55
34
29
Rail Wheel Replacement
Step 1
14
32
22
Step 2 62 *8
NOTE: 38 28
1. HAVE ONE PERSON HOLD THE LINEAR SHAFTS WHILE
YOU REMOVE THE LINEAR SHAFT HOUSING AND 57
THEN SLIDE THE CARRIAGE OUT. 62 60
42
49
48
35
55
31
49 15
48
16 48
31
55
34
35
48
31
55
55
Step 4
INSTALLATION IS THE REVERSE OF REMOVAL. (DO NOT INSTALL THE SEAT PAD UNTIL
COMPLETING RAIL WHEEL ADJUSTMENT ON NEXT PAGE)
STEP 4 STEP 1
LOOSEN SCREW LOOSEN SCREW
STEP 5 STEP 2
LOOSEN NUT LOOSEN NUT
Rail Wheel Adjustment Step 1
www.tuffstuffitness.com
STEP 6 STEP 3
LOOSEN SCREW LOOSEN SCREW
STEP 10 STEP 13
TIGHTEN SCREW TIGHTEN SCREW
www.tuffstuffitness.com
STEP 7
GENTLY SCREW BACK IN UNTIL YOU FEEL THE WHEELS HAVE COME INTO
CONTACT WITH THE LINEAR SHAFTS. ROLL THE CARRIAGE BACK AND FORTH
TO TEST FOR SMOOTHNESS. IF IT ROLLS SMOOTHLY YOU MAY PROCEED TO
NEXT STEP. IF NOT, MAKE NECESSARY ADJUSTMENTS.
33
Basic Exercise Guide
Use this equipment only for the exercises as shown. Know your limitations. If you are new to weight training, always start
with lighter weight, learn how to perform the exercise correctly and train at a controlled rate of speed. Warm up properly with
stretchings, calisthenics or cardiovascular exercises. Never hold your breath – general rule of thumb is to exhale when you exert.
TuffStuff warrants to the original purchaser that TuffStuff equipment will be free from defects in material and workmanship. All warranty
periods begin to run from the date of purchase to the original purchaser. The warranty and remedies set forth herein are conditioned upon proper
storage, installation, use and maintenance and conformance with any recommendations of TuffStuff. This warranty does not cover products not
manufactured by TuffStuff or products which are altered without the express written consent of TuffStuff.
The obligation of TuffStuff under this warranty is limited to repairing or replacing warranted defective parts as TuffStuff may elect, at TuffStuff’s
facility in Chino, California, without charge to the purchaser. Purchaser is responsible for installation of repaired or replaced parts, and all
transportation and insurance costs on returned or replaced equipment to and from TuffStuff’s facility in Chino.
THE FOREGOING SHALL CONSTITUTE THE SOLE REMEDY OF THE PURCHASER AND THE SOLE LIABILITY
OF TUFFSTUFF WITH REGARD TO WARRANTY, WHETHER EXPRESS OR IMPLIED BY OPERATION OF LAW
OR OTHERWISE, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY
OR FITNESS. TUFFSTUFF SHALL IN NO EVENT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL LOSSES,
DAMAGES, OR EXPENSES IN CONNECTIONS WITH EXERCISE PRODUCTS. TUFFSTUFF’S LIABILITY HERE-
UNDER IS EXPRESSLY LIMITED TO THE REPAIRS OR REPLACEMENTS OF WARRANTED DEFECTIVE PARTS.
This written warranty is the final, complete and exclusive agreement of the parties with respect to the quality or performance of the equipment
and no action for breach of this written warranty or any implied warranty shall be commenced more than one (1) year after the accrual of the
cause of action. No modification of this warranty or waiver of its terms shall be binding on either party unless approved in writing by an
authorized representative of the party. Contact TuffStuff Fitness International, Inc. at 13971 Norton Avenue, Chino, CA 91710, before returning
any defective equipment.
This warranty gives you specific legal rights and you may also have other rights, which may vary from state to state.
SERIAL #
Write your Serial number here for future reference Purchase Date