Documente Academic
Documente Profesional
Documente Cultură
Yaqoob
Tanzil
1. Drilling,
2. reservoir,
3. production
4. Mere s pehla ques hua tha well bire storage.
5. Real gas,
6. Nodal analysis
7. Volumetric estimations
8. Darcy law ki dimensions
9. Petroleum systems
10. Archis equation
11. Sb general puchty hen,
Jawad Sarmad
1. well testing,
2. staedy state wagara,
3. drill bits,
4. mostly reservoir engineering k pochy thy sawal
5. Well testing,
6. flow regimes,
7. MBE,
8. Drilling bits or kuch situational questions thy
Overview
Here are some questions Interviewer asked me in PPL Interview:
1. Tri-axial Stresses in Casing and tubing Design
2. MBE for Depletion Drive Gas Reservoirs
3. Recovery Factor for gas Reservoirs,
4. Phase Diagrams of Black oil and Gas Condensate Reservoirs,
5. Rig Selection Criteria for Drilling.
6. Formation volume Factor of gas
7. Compressibility of Gas.
8. ECD (eccentred caliper device)
9. Role of ECD during Kick
10. Hoisting System of Rig
11. Newtonian and Non-Newtonian Fluids.
12. Models for Non-Newtonian Fluids,
13. n, k Co-efficient
14. What is Newtonian Law of Fluids.
15. Elastoplastic fluids
Other than these questions, there were some HR Questions and current Job Responsibilities
Abdul
Haha mera jo interview hua tha unhun ne pucha tha abt..
1. Well testing.
2. Isochronal modified isochronal etc. Inki diagrams banao, explain kro, which is better...etc.
3. Phr PVT analysis ka bht pucha tha...
4. Pvt tests hote hain unka..
5. Aur umm artificial lift methods..etc