Documente Academic
Documente Profesional
Documente Cultură
ARTEMISceiling.15.07.001
ceiling
class appearance.
with its streamline designs as well as a world
maintenance is meticulously taken care of
within a sturdy and robust pilaster. Ease of
designs through its integration of mirrors
is the epitome of modern restroom cubicle
ARTEMIS cubicle systems were created. It
A concoction of elegance and strength –
ceiling
Accessories + Specifications + Drawings
Stainless Steel + Aluminium
General Conceal U-channel Cover 6000mm x 50mm x 100mm x 4.5mm thick
BESCO™ supply and install ARTEMISceiling Restroom Cubicle System, which Conceal U-channel Cover is specially designed to conceal screw heads. It is Mild Steel rectangular
is highly resistant against water and impact. easily installed by snap fitting onto the U-channel. hollow section as
Top Rail above ceiling
Materials Accessories Mild Steel
All accessories shall be made of stainless steel grade 304 and all hardware/ Each restroom cubicle will be equipped with the following accessories: Pilaster bracket
fittings shall be made of powder-coated aluminium grade 6063-T5. u BESCO™ Stainless Steel Lockset with round occupancy indicator.
Anodised aluminium option is available upon request. The doors and u BESCO™ Stainless Steel Coat Hook with rubber stopper allows loads
intermediate partitions shall be 12mm thick High Pressure Laminates False ceiling
up to 25kg. level
(HPL) compact board (or phenolic board) with chamfered edges. u BESCO™ Stainless Steel Hinges with cover, adjustable from fully close
200
to open at interval of 15°. Powder coated
HPL compact boards are manufactured from sheets of special kraft and Aluminium
Metal Box-up
decor papers, impregnated with thermosetting synthetic resins, fused
Compartment’s Dimension Pilaster
together under heat and high pressure. HPL compact board has laminates
The recommended restroom cubicle size: Stainless Steel
on both sides with either matt finish or textured finish. The performance Mirror/Glass panel
of the board is tested according to BS EN Standards and has the following 850 ~ 900mm by 1830mm by 2500mm (W x D x H).
or HPL Coat Hook
rating: u Visible height of restroom compartment measured from FFL to false 12mm thick
ceiling is 2500mm. 12mm thick Divider
Stainless Steel
u Boiling Water (EN438-7) : 8.4 (Within max. 11.5) u Door width shall be between 600mm ~ 700mm for standard cubicles. Lock Set Cubicle Door
2500
1830
u Fire Rating (EN476-6/7) : Class 1 (meet min. 1) u Door width clearance shall comply with BCA’s Code on Accessibility in (w/occupancy
u Impact (EN438-11) : 2.8 Newton (exceed min. 2.0) the Built Environment 2013 for the following: indicator)
Stainless Steel
u Stain (EN438-15) : 5 (exceed min. 4) • Ambulant WC Compartment: minimum 800mm Metal Box-up Hinges
u Scratch (EN438-2) : 4 Newton (exceed min. 2.0) • Accessible WC Compartment: minimum 850mm Stainless Steel
Lock Set
(w/occupancy
It is a natural occurrence under various climatic conditions that HPL Colours
200
Finished floor indicator)
100
compact boards may undergo dimensional changes of tolerance BESCO™ recommends that the System shall be of a single colour. Colour level
differences within ±5mm. differences from Doors, Pilasters and Intermediate Partitions are available
upon request. The price will vary due to multiple color selections. Elevation 1 Elevation 2
HPL compact boards used in our systems are certified by Singapore
Environment Council with Singapore Green Label. Size of Boards
Jumbo size of 6ft x 8ft / 6ft x 12ft / 6ft x 14ft.
Doors
All Doors shall be of 12mm thick HPL compact board with chamfered edge. Installation
Each will be supported by 3 Stainless Steel Hinges (4 Stainless Steel Hinges Installation will be executed under the supervision of BESCO™’s site 6000mm x 50mm x 100mm x 4.5mm thick
for Door width ≥ 750mm or Door height ≥ 2100mm) affixed to the Pilaster, Mild Steel rectangular
supervisor(s) and shall be carried out in accordance with BESCO™
completed with Stainless Steel Door Lock and Stainless Steel Coat Hook.
installation instructions. hollow section as
The floor clearance is 100mm. X Top Rail above ceiling
1830
2500
100mm floor clearance.
06. Centre Pilaster (w/occupancy
indicator)
Top Rail 07. End Pilaster 12mm thick
Heavy-duty Galvanised Steel Rectangular Hollow Section, 100mm x Cubicle Door Powder coated
50mm x 4.5mm (cross-section dimension, L x W x Thk), act as a top rail 08a. Metal Box-up (centre pilaster) Aluminium
shall be concealed by false ceiling and secured to the wall using Mild Steel 08b. Metal Box-up (end pilaster) Pilaster
Stainless Steel
100
Pilaster Bracket.
09a. Latch Rubber Lining X Hinges (left) Finished floor level
09b. Door Stopper Rubber Lining
Intermediate Partitions Section X-X
All intermediate partitions shall be of 12mm thick HPL compact board 10a. Concealed U-channel 1
with aluminium concealed U-channel, 27mm x 26.5mm x 1.2mm (cross- 10b. Mild Steel Rectangular Hollow Section
section dimension, L x W x Thk), affixed at its ends (to the wall and
pilaster). To improve stability of the system, BESCO™ recommends that
11. Mild Steel Pilaster Bracket - Centre Layout Plan of
length exceeding 1800mm to be fitted with an extra Pedestal or increase 12a. Mild Steel Pilaster Bracket - Left
thickness to 19mm HPL compact board. 12b. Mild Steel Pilaster Bracket - Right
Restroom Cubicle
a
a
a
a
b
b
01 02 03 04 a b 05 06 07 08 09 b 10 b 11 12
TITANceiling
the toilet is remarkably easy.
absence of supporting legs, maintenance of
design attracts the attention of its users by
100
Each restroom cubicle will be equipped with the following accessories:
Stainless Steel
HPL compact boards are manufactured from sheets of special kraft and u BESCO™ Stainless Steel Door Knob of Ø42mm with recess.
Box-up Stainless Steel
u BESCO™ Stainless Steel Thumbturn with occupancy indicator. Box-up
decor papers, impregnated with thermosetting synthetic resins, fused Stainless Steel
u BESCO™ Stainless Steel Coat Hook with rubber stopper comes
together under heat and high pressure. HPL compact board has laminates Coat Hook
with/without cover and allow load up to 25kg.
on both sides with either matt finish or textured finish. The performance Stainless Steel
u BESCO™ Stainless Steel Hinges with cover, adjustable from fully close U-channel
1830
u Fire Rating (EN476-6/7) : Class 1 (meet min. 1) Compartment’s Dimension indicator) Stainless Steel
u Impact (EN438-11) : 2.8 Newton (exceed min. 2.0) The recommended restroom cubicle size is 800 ~ 900mm by Stainless Steel Thumbturn
u Stain (EN438-15) : 5 (exceed min. 4) 1500 ~ 1800mm by 2400mm (W x D x H): Hinges (w/occupancy
u Scratch (EN438-2) : 4 Newton (exceed min. 2.0) Stainless Steel indicator)
u Visible height of restroom compartment measured from FFL to false
U-channel
ceiling is 2400mm.
It is a natural occurrence under various climatic conditions that HPL 19mm thick
u Door width shall be between 600mm ~ 700mm for standard cubicles. Cubicle Door
compact boards may undergo dimensional changes of tolerance
150
u Door width clearance shall comply with BCA’s Code on Accessibility in Finished floor level
differences within ±5mm. the Built Environment 2013 for the following:
• Ambulant WC Compartment: minimum 800mm
HPL compact boards used in our systems are certified by Singapore • Accessible WC Compartment: minimum 850mm Elevation 1 Elevation 2
Environment Council with Singapore Green Label.
Colours
Doors BESCO™ recommends that the System shall be of a single colour. Colour
All Doors shall be of 19mm thick HPL compact board with chamfered edge. differences from Doors, Pilasters and Intermediate Partitions are available
Each will be supported by 3 Stainless Steel Hinges (4 Stainless Steel Hinges upon request. The price will vary due to multiple color selections. 6000mm x 50mm x 100mm x 4.5mm thick
Mild Steel rectangular
for Door width ≥ 750mm or Door height ≥ 2100mm) affixed to the Pilaster, hollow section as Top Rail above ceiling
completed with Stainless Steel Coat Hook and Stainless Steel Door Knob.
Size of Boards X False ceiling level
Jumbo size of 6ft x 8ft / 6ft x 12ft / 6ft x 14ft.
Doors will be routered at its vertical ends and incorporated with Rubber
100
Sponge to dampen noise. Installation Mild Steel Pilaster bracket
Installation will be executed under the supervision of BESCO™’s site
Pilasters supervisor(s) and shall be carried out in accordance with BESCO™ Stainless Steel Box-up
All Pilasters shall be of 19mm thick HPL compact board with chamfered installation instructions.
edge and completed with Stainless Steel Thumbturn for locking doors. 12mm thick
Intermediate
1830
facilitate closure of doors. The visible height from finished-floor level (FFL) 03. SS Tri Base Coat Hook (w/occupancy
to false ceiling is 2400mm, included a floor clearance of 150mm. BESCO™ 04. SS Thumbturn (w/occupancy indicator) 19mm thick indicator)
Cubicle Door
recommends standard pilaster width to be 300mm and end Pilaster width 05. SS Lock Set (w/occupancy indicator) & Pilaster
to be 150mm for maximum stability. 06. SS Hinge
07. SS Spring Hinge
Intermediate Partitions X
All Intermediate Partitions shall be of 12mm thick HPL compact board 08. SS Box Up Stainless Steel
Finished floor level
150
Hinges (left)
with Stainless Steel U-channel, 21.5mm x 14.5mm x 1mm (cross-section 09. SS U-channel (2200mm) 1
dimension, L x W x Thk), affixed at its ends (to the wall and pilaster). 10. Black Rubber Sponge (1860mm)
To improve stability of the system, BESCO™ recommends that length 11a. Steel Rectangular Plate Layout Plan of Section X-X
exceeding 1800mm to be fitted with an extra Pedestal or increase thickness 11b. Mild Steel Rectangular Channel (6000mm)
to 19mm HPL compact board.
12. Alu L-Angle (4880mm)
Restroom Cubicle
a b
01 02 03 04 05 06 07 08 09 10 11 12
u Available in 19mm or 20mm system. u SS accessories in grade 304. ^ Please check with your local distributors for more information.
u SS Hinges - gravity is available upon request. u Top rail fixing details are hidden above false ceiling. CEILING HUNG
Formica® Compact® Grade Laminates are certified by Singapore Environment Council with Singapore Green Label.
BEScube System
Besco Building Supplies (SEA) Pte Ltd
26 Ubi Road 4 The Besco Building Singapore 408613
t (65) 6286 0666 f (65) 6741 3430
sales@besco.sg www.besco.sg
ARTEMIS.15.07.001
200
Materials Accessories
Stainless Steel
All accessories shall be made of stainless steel grade 304 and all hardware/ Each restroom cubicle will be equipped with the following accessories:
Mirror/Glass Coat Hook
fittings shall be made of powder-coated aluminium grade 6063-T5. u BESCO™ Stainless Steel Lockset with round occupancy indicator. panel or HPL
Anodised aluminium option is available upon request. The doors and u BESCO™ Stainless Steel Coat Hook with rubber stopper allows loads 12mm thick
intermediate partitions shall be 12mm thick High Pressure Laminates 12mm thick Divider
up to 25kg. Stainless Steel Cubicle Door
(HPL) compact board (or phenolic board) with chamfered edges. u BESCO™ Stainless Steel Hinges with cover, adjustable from fully close Door Lock
(w/occupancy
1930
1830
to open at interval of 15°.
HPL compact boards are manufactured from sheets of special kraft and indicator)
decor papers, impregnated with thermosetting synthetic resins, fused Stainless Steel Stainless Steel
together under heat and high pressure. HPL compact board has laminates Compartment’s Dimension Metal Box-up Hinges Door Lock
on both sides with either matt finish or textured finish. The performance The recommended restroom cubicle size: (w/occupancy
of the board is tested according to BS EN Standards and has the following indicator)
850 ~ 900mm by 1500 ~ 1800mm by 1930mm (W x D x H).
rating:
200
100
u Visible height of restroom compartment measured from FFL to the top Finished floor level
of pilaster is 1930mm.
u Boiling Water (EN438-7) : 8.4 (Within max. 11.5) u Door width shall be between 600mm ~ 700mm for standard cubicles.
u Fire Rating (EN476-6/7) : Class 1 (meet min. 1)
u Door width clearance shall comply with BCA’s Code on Accessibility in
80mm
u Impact (EN438-11) : 2.8 Newton (exceed min. 2.0) the Built Environment 2013 for the following: Elevation 1 Elevation 2
u Stain (EN438-15) : 5 (exceed min. 4) • Ambulant WC Compartment: minimum 800mm
u Scratch (EN438-2) : 4 Newton (exceed min. 2.0) • Accessible WC Compartment: minimum 850mm
Base Concretel
100mm minimum
It is a natural occurrence under various climatic conditions that HPL Colours
compact boards may undergo dimensional changes of tolerance BESCO™ recommends that the System shall be of a single colour. Colour
differences from Doors, Pilasters and Intermediate Partitions are available
differences within ±5mm.
upon request. The price will vary due to multiple color selections.
Doors
Installation
X
All doors shall be of 12mm thick HPL compact board with chamfered edge.
Installation will be executed under the supervision of BESCO™’s site
Each will be supported by 3 Stainless Steel Hinges (4 Stainless Steel Hinges
supervisor(s) and shall be carried out in accordance with BESCO™
for Door width ≥ 750mm or Door height ≥ 2100mm) affixed to the pilaster, installation instructions.
completed with Stainless Steel Door Lock and Stainless Steel Coat Hook. 12mm thick
Divider
The floor clearance is 100mm. Accessories
Aluminium Stainless Steel Coat Hook
01. SS Lock Set (w/round occupancy indicator) U-channel
Pilasters
All Pilasters shall be made of powder-coated aluminium grade 6063-T5, 02. SS Long Lock Set (w/occupancy indicator)
2 Stainless Steel Door Lock
centre Pilaster - 202mm x 55mm x 6mm (cross-section dimension, W x D 03. SS Coat Hook (w/cover) (w/occupancy indicator)
1830
1930
x Thk). End Pilasters - 101mm x 55mm x 6mm (cross-section dimension,
W x D x Thk). Pilaster’s front face is fitted with mirror/glass or HPL and 04a. SS Hinges (w/cover - Left)
powder-coated Metal Box-up. Anodised aluminium option is available
SS Hinges (w/cover - Right) 12mm thick
04b. SS Spring Hinge Cubicle Door Powder coated
upon request. All Pilasters shall be anchored to the floor using aluminium Aluminium Pilaster
Tall L-bracket and covered with a Metal Box-up. An acoustic Rubber Lining 05. End Pilaster (w/latch)
shall be incorporated to the pilasters for dampening out door banging 06. Centre Pilaster
100
noise. Finished floor level
07. End Pilaster
a
a
b
01 02 03 04 a b 05 06 07 08 09 b 10 11 a b
TITANbox
imagine.
cubicle could also be as trendy as one could
system eliminates the need for a top rail. The
1940
1830
together under heat and high pressure. HPL compact board has laminates
800 ~ 900mm by 1500 ~ 1800mm by 1940mm (W x D x H). Stainless Steel Thumbturn
on both sides with either matt finish or textured finish. The performance (w/occupancy
u Height of restroom compartment measured from FFL to the top of the Hinges
of the board is tested according to BS EN Standards and has the following indicator)
pilaster is 1940mm.
rating:
u Door width shall be between 600mm ~ 700mm for standard cubicles. Stainless Steel
19mm thick Door Knob
u Boiling Water (EN438-7) : 8.4 (Within max. 11.5) u Door width clearance shall comply with BCA’s Code on Accessibility in Cubicle Door
110
the Built Environment 2013 for the following: Finished floor level
u Fire Rating (EN476-6/7) : Class 1 (meet min. 1)
• Ambulant WC Compartment: minimum 800mm
u Impact (EN438-11) : 2.8 Newton (exceed min. 2.0) Stainless Steel
• Accessible WC Compartment: minimum 850mm
Box-up Stainless Steel
u Stain (EN438-15) : 5 (exceed min. 4) Box-up
u Scratch (EN438-2) : 4 Newton (exceed min. 2.0) Colours
1830
1940
02. SS Coat Hook (w/cover) 19mm thick
All Pilasters shall be of 19mm thick HPL compact board with chamfered Cubicle Door
edge, completed with Stainless Steel Thumbturn for locking doors. 03. SS Tri Base Coat Hook & Pilaster Stainless Steel
Colours different from doors are available upon request. The Pilaster shall 04. SS Thumbturn (w/occupancy indicator) Door Knob
be anchored to the floor using L-plates and covered with Stainless Steel
05. SS Lock Set (w/occupancy indicator)
Box Up. Pilasters will be routered at its vertical ends to facilitate closure of
110
doors. BESCO™ recommends standard pilaster width to be 300mm and 06. SS Long Lock Set (w/occupancy indicator) Finished floor level
end Pilaster width to be 150mm for maximum stability. 07. SS Hinge Stainless Steel Hinges Stainless Steel
X (left) Box-up
08. SS Spring Hinge
Intermediate Partitions
All Intermediate Partitions shall be of 12mm thick HPL compact board 09. SS Box Up 1
with Stainless Steel U-channel, 21.5mm x 14.5mm x 1mm (cross-section 09a. SS Side Cover
09b. SS Front Cover (1200mm)
dimension, L x W x Thk), affixed at its ends (to the wall and pilaster). Layout Plan of
To improve stability of the system, BESCO™ recommends that length 10. SS U-channel (2200mm)
Section X-X
exceeding 1800mm to be fitted with an extra Pedestal or increase thickness 11. Black Rubber Sponge (1860mm) Restroom Cubicle
to 19mm HPL compact board.
b
a
01 02 03 04 05 06 07 08 09 10 11
AXIS.15.07.001
Statements and recommendations provided by BESCO™ either communicated through publication or verbally are based on empirical data and experience acquired to date. Laminated HPL panels may be subjected to changes due to application methods, substrate variations and environmental conditions.
Images appearing in our publication / website are meant to be used as reference materials. No liability may be derived from it as results may vary individually.
Besco Building Supplies (SEA) Pte Ltd l 26 Ubi Road 4 The Besco Building Singapore 408613 t (65) 6286 0666 f (65) 6741 3430 sales@besco.sg www.besco.sg
The uniqueness in Bacchus hinge lies in the interchangeable pivot pin. It allows
1980
1830
Bacchus Latch
exceed 1800mm. Lock Set
(w/occupancy Bacchus
HPL compact boards are manufactured from sheets of special kraft and decor indicator) Hinges
Accessories Bacchus Latch
papers, impregnated with thermosetting synthetic resins, fused together under Lock Set
Each restroom cubicle will be equipped with the following accessories:
heat and high pressure. HPL compact boards has laminates on both sides with u Bacchus Latch Lock Set of 160mm x 30mm x 34mm (W x H x D) Bacchus Door (w/occupancy
either matt finish or textured finish. The performance of the board is tested Stopper indicator)
with occupancy indicator of 80mm x 22mm x 5.8mm (W x H x D).
150
according to BS EN Standards and has the following rating: Stainless Steel Box-up Finished floor level
u Bacchus Coat Hook allows load up to 15kg.
u Bacchus Door Stopper.
u Boiling Water (EN438-7) : 8.4 (Within max. 11.5) Elevation 1 Elevation 2
u Bacchus Hinges come with a unique on-site door setting mechanism that
u Fire Rating (EN476-6/7) : Class 1 (meet min. 1) allows the door to behave normally to close fully or open at an interval of
u Impact (EN438-11) : 2.8 Newton (exceed min. 2.0) 15°- 90°. It allows to be a Right or Left Hinge.
u Stain (EN438-15) : 5 (exceed min. 4) u BESCO™ Stainless Steel Box Up with height 100mm and brushed finish.
u Scratch (EN438-2) : 4 Newton (exceed min. 2.0)
Compartment’s Dimension
It is a natural occurrence under various climatic conditions that HPL compact The recommended restroom cubicle size: X
boards may undergo dimensional changes of tolerance differences within 800mm ~ 900mm by 1500mm ~ 1800mm by 1980mm (W x D x H).
±5mm. u Height of restroom compartment measured from FFL to the top of the pilaster
is 1980mm.
HPL compact boards used in our systems are certified by Singapore Environment u Door width shall be between 600mm ~ 700mm for standard cubicles. Customised 19mm thick Door and Pilaster
Intermediate
Council with Singapore Green Label. u Door width clearance shall comply with BCA’s Code on Accessibility in the
Partition Bacchus Coat Hook
Built Environment 2013 for the following:
50mm x 50mm square tube frame
Doors • Ambulant WC Compartment: minimum 800mm 10mm x 50mm flat metal frame
All Doors shall be of 19mm thick HPL compact board with chamfered edge. Each • Accessible WC Compartment: minimum 850mm
2
1830
1980
Bacchus Lock Set
will be supported by 3 Bacchus Hinges (4 Bacchus Hinges for Door width ≥
750mm or Door height ≥ 2100mm) affixed to the Pilaster, completed with Bacchus Colours
Stainless Steel Box-up
Coat Hook and Bacchus Latch Lock Set. Doors will be routered at its vertical ends BESCO™ recommends that the System shall be of a single colour. Colour
and incorporated with Rubber Sponge to dampen noise. The floor clearance is differences from Doors, Pilasters and Intermediate Partitions are available upon Bacchus Door Stopper
150mm. request. The price will vary due to multiple color selections.
150
Finished floor level
Pilasters Size of Boards
Bacchus Hinges Section X-X
All Pilasters shall be of 19mm thick HPL compact board with chamfered edge and Jumbo size of 6ft x 8ft / 6ft x 12ft / 6ft x 14ft. X (left)
completed with Bacchus Latch Lock Set for locking doors. Both end Pilasters shall
be embedded onto side walls, secured with threaded rods and chemical adhesive. Installation 1
Pilasters will be routered at its vertical ends to facilitate closure of doors. BESCO™ Installation will be executed under the supervision of BESCO™’s site supervisor(s)
recommends standard Pilaster width to be 300mm and end Pilaster width to be and shall be carried out in accordance with BESCO™ installation instructions. Layout Plan of
150mm for maximum stability. Restroom Cubicle
BACCHUS accessories
applicable for other Systems
ARTEMISceiling
ATHENAneo
SYSTEMS
TITANceiling
ARTEMIS
TITANbox
AXIS
ZMS
Bacchus Latch Lock Set Bacchus Coat Hook Bacchus Hinge Bacchus Door Stopper SS Spring Hinge SS Box Up Black Rubber Sponge
•
•
•
•
•
•
Understanding that there is a need for the restroom cubicle system with the ability to tolerate heavy
usage and deterioration, the ZMS is created. This restroom cubicle system functions under harsh
conditions and remain as magnificent as ever. Integrating both nylon and aluminium materials in
the construction, the aesthetics of the restroom are brought to a new level.
ZMS matte
ZMS
matte
ZMSmatte.ny+alu.15.07.001
Statements and recommendations provided by BESCO™ either communicated through publication or verbally are based on empirical data and experience acquired to date. Laminated HPL panels may be subjected to changes due to application methods, substrate variations and environmental conditions.
Images appearing in our publication / website are meant to be used as reference materials. No liability may be derived from it as results may vary individually.
Besco Building Supplies (SEA) Pte Ltd l 26 Ubi Road 4 The Besco Building Singapore 408613 t (65) 6286 0666 f (65) 6741 3430 sales@besco.sg www.besco.sg
ZMSmatte
accessories + specifications + drawings
Nylon + Aluminium
General Intermediate Partitions
BESCO™ supply and install ZMSmatte Restroom Cubicle System, which is highly All Intermediate Partitions shall be of 12mm thick HPL compact board with
resistant against water and impact. Aluminium U-channel, 25mm x 16.5mm x 1.8mm (cross section dimension, L x
W x Thk), affixed at its ends (to the wall and pilaster). To improve stability of the Aluminium Aluminium
Top Rail Nylon Coat Hook
Top Rail
Materials system, BESCO™ recommends that length exceeding 1800mm to be fitted with an
All accessories shall be made of Polyamide Grade 6 (nylon matte) and all extra Pedestal or increase the thickness to 19mm HPL compact board.
20
hardware/fittings shall be made of Anodised Aluminium Grade 6063-T5. Powder-
coated aluminium option is available upon request. The Doors, Pilasters and Top Rail Aluminium
Aluminium 12mm thick U-channel
Intermediate Partitions shall be 12mm thick High Pressure Laminates (HPL) A clip-on Top Rail Slot Cover that can be easily installed to the underside of Top U-channel Pilaster
12mm thick
compact board (or phenolic board) with chamfered edges. Rail that provides a visually appealing and uninterrupted curve of the Top Rail for Nylon Intermediate
Aluminium
maximum strength, stability and alignment of the system. Thumbturn Door Stopper Partition
(w/occupancy
HPL compact boards are manufactured from sheets of special kraft and decor
2030
1850
indicator) Nylon
papers, impregnated with thermosetting synthetic resins, fused together under Accessories Thumbturn
Nylon Nylon Hinges (w/occupancy
heat and high pressure. HPL compact board has laminates on both sides with Each restroom cubicle will be equipped with the following accessories in matte Door Knob indicator)
either matt finish or textured finish. The performance of the board is tested finished:
12mm thick Nylon
according to BS EN Standards and has the following rating: u Nylon Door Knob of Ø50mm.
Cubicle Door Door Knob
u Nylon Thumbturn with occupancy indicator.
150
Finished floor level
u Boiling Water (EN438-7) : 8.4 (Within max. 11.5) u Nylon Coat Hook with/without rubber stopper allow loads up to 20 kg/15 kg
u Fire Rating (EN476-6/7) : Class 1 (meet min. 1) respectively. Nylon Nylon
Adjustable Leg Adjustable Leg
u Impact (EN438-11) : 2.8 Newton (exceed min. 2.0) u Nylon Hinge comes with a unique on-site door setting mechanism that allows
u Stain (EN438-15) : 5 (exceed min. 4) the door to behave normally to close fully or open at an interval of 15°- 90°. Elevation 1 Elevation 2
u Scratch (EN438-2) : 4 Newton (exceed min. 2.0) It allows to be a Right or Left Hinge.
u Nylon Adjustable Leg with a working range from 145mm to170mm.
It is a natural occurrence under various climatic conditions that HPL compact
boards may undergo dimensional changes of tolerance differences within Compartment’s Dimension
X
±5mm. The recommended restroom cubicle size: Aluminium Top Rail
800mm ~ 900mm x 1500mm ~ 1800mm x 2030mm (W x D x H).
HPL compact boards used in our systems are certified by Singapore Environment u Headroom clearance of restroom compartment measured from FFL
12mm thick
Council with Singapore Green Label. to the bottom of the Top Rail is 2000mm. Intermediate
u Door size shall be between 600mm ~ 700mm in width. Partition Nylon Coat Hook
Doors u Door size shall be between 800mm ~ 1000mm in width for ambulant
restroom. Aluminium
All Doors shall be of 12mm thick HPL compact board with chamfered edge. Each 2 U-channel Nylon Thumbturn
will be supported by 3 Nylon Hinges (4 Nylon Hinges for Door width ≥ 750mm or
1830
2030
(w/occupancy indicator)
Colours 12mm thick
Door height ≥ 2100mm) affixed to the Pilaster, completed with Nylon Coat Hook Cubicle Door
BESCO™ recommends that the System shall be of a single colour. Colour
and Nylon Door Knob. The floor clearance is 150mm. & Pilaster
differences from Doors, Pilasters and Intermediate Partitions are available upon Nylon Door Knob
request. The price will vary due to multiple color selections.
Pilasters
All Pilasters shall be of 12mm thick HPL compact board with Aluminium Door
Finished floor level
150
Size of Boards
Stopper profile (incorporated with Rubber Lining to dampen noise) affixed on
Jumbo size of 6ft x 8ft / 6ft x 12ft / 6ft x 14ft. Nylon Hinges
one vertical side and completed with Nylon Thumbturn for locking doors. The X Nylon
(left) Adjustable Leg
Pilaster shall be anchored to the floor using Nylon Adjustable Leg (base Ø72mm)
Installation 1
with threaded rod inserts for stability. BESCO™ recommends standard Pilaster Section X-X
Installation will be executed under the supervision of BESCO™’s site supervisor(s)
width to be 300mm and end Pilaster width to be 150mm for maximum stability. An
and shall be carried out in accordance with BESCO™ installation instructions. Layout Plan of
acoustic Rubber Lining shall be incorporated to the Pilasters for dampening out
door banging noise. Restroom Cubicle
ZMS
ZMS.ss+alu.15.07.001
Statements and recommendations provided by BESCO™ either communicated through publication or verbally are based on empirical data and experience acquired to date. Laminated HPL panels may be subjected to changes due to application methods, substrate variations and environmental conditions.
Images appearing in our publication / website are meant to be used as reference materials. No liability may be derived from it as results may vary individually.
Besco Building Supplies (SEA) Pte Ltd l 26 Ubi Road 4 The Besco Building Singapore 408613 t (65) 6286 0666 f (65) 6741 3430 sales@besco.sg www.besco.sg
ZMS
accessories + specifications + drawings
Stainless Steel + Aluminium
General Pilasters
BESCO™ supply and install ZMS Restroom Cubicle System, which is highly All Pilasters shall be of 12mm thick HPL compact board with Aluminium Door
resistant against water and impact. Stopper profile (incorporated with Rubber Lining to dampen noise) affixed on one
vertical side and completed with Stainless Steel Thumbturn for locking doors. The Aluminium Stainless Steel Coat Hook
(w/rubber stopper) Aluminium
BESCO™ recommends standard Pilaster width to be 300mm and end Pilaster Top Rail Top Rail
Materials
All accessories shall be made of Stainless Steel Grade 304 and all hardware/ width to be 150mm for maximum stability.
30
fittings shall be made of powder-coated Aluminium Grade 6063-T5. Anodised
aluminium option is available upon request. The Doors, Pilasters and Intermediate Top Rail Aluminium Aluminium
A clip-on Top Rail Slot Cover that can be easily installed to the underside of Top U-channel 12mm thick U-channel
Partitions shall be 12mm thick High Pressure Laminates (HPL) compact board (or
Pilaster
phenolic board) with chamfered edges. Rail that provides a visually appealing and uninterrupted curve of the Top Rail for 12mm thick
maximum strength, stability and alignment of the system. Stainless Steel Aluminium Intermediate
Thumbturn Door Stopper Partition
HPL compact boards are manufactured from sheets of special kraft and decor (w/occupancy
2030
1850
indicator) Stainless Steel
papers, impregnated with thermosetting synthetic resins, fused together under Accessories
Stainless Steel Thumbturn
heat and high pressure. HPL compact board has laminates on both sides with Each restroom cubicle will be equipped with the following accessories: Hinges (w/occupancy
u BESCO™ Stainless Steel Door Knob of Ø42mm with recess. indicator)
either matt finish or textured finish. The performance of the board is tested
u BESCO™ Stainless Steel Thumbturn with occupancy indicator.
according to BS EN Standards and has the following rating: 12mm thick Stainless Steel
Stainless Steel Lock Set is also available upon request. Cubicle Door Door Knob
u BESCO™ Stainless Steel Coat Hook with rubber stopper comes with/
150
u Boiling Water (EN438-7) : 8.4 (Within max. 11.5) Finished floor level
u Fire Rating (EN476-6/7) : Class 1 (meet min. 1) without cover and allow load up to 25kg.
u BESCO™ Stainless Steel Hinges with cover, adjustable from fully close to Stainless Steel Stainless Steel
u Impact (EN438-11) : 2.8 Newton (exceed min. 2.0) Adjustable Leg Adjustable Leg
u Stain (EN438-15) : 5 (exceed min. 4) open at interval of 15°~ 90°. Elevation 1 Elevation 2
u BESCO™ Stainless Steel Adjustable Leg with brushed finish has a working
u Scratch (EN438-2) : 4 Newton (exceed min. 2.0)
range from 145mm to 165mm.
It is a natural occurrence under various climatic conditions that HPL compact
boards may undergo dimensional changes of tolerance differences within
Compartment’s Dimension X
The recommended restroom cubicle size: Aluminium Top Rail
±5mm.
800mm ~ 900mm x 1500mm ~ 1800mm x 2030mm (W x D x H).
u Visible height of restroom compartment measured from FFL to the bottom of
HPL compact boards used in our systems are certified by Singapore Environment 12mm thick
the Top Rail is 2000mm.
Council with Singapore Green Label. Intermediate Stainless Steel Coat Hook
u Door width shall be between 600mm ~ 700mm for standard cubicles. Partition (w/rubber stopper)
u Door width clearance shall comply with BCA’s Code on Accessibility in the
Doors
Built Environment 2013 for the following: Aluminium
All Doors shall be of 12mm thick HPL compact board with chamfered edge. Each 2 U-channel Stainless Steel Thumbturn
• Ambulant WC Compartment: minimum 800mm
will be supported by 3 Stainless Steel Hinges (4 Stainless Steel Hinges for Door (w/occupancy indicator)
2030
1830
• Accessible WC Compartment: minimum 850mm 12mm thick
width ≥ 750mm or Door height ≥ 2100mm) affixed to the Pilaster, completed with
Cubicle Door
Stainless Steel Coat Hook and Stainless Steel Door Knob. The floor clearance & Pilaster
Colours Stainless Steel
is 150mm. BESCO™ recommends that the System shall be of a single colour. Colour Door Knob
differences from Doors, Pilasters and Intermediate Partitions are available upon
Intermediate Partitions request. The price will vary due to multiple color selections. Finished floor level
150
All Intermediate Partitions shall be of 12mm thick HPL compact board with
Aluminium U-channel, 25mm x 16.5mm x 1.8mm (cross-section dimension, L x Stainless Steel Hinges 200 Stainless Steel
W x Thk), affixed at its ends (to the wall and pilaster). Intermediate Partitions
Size of Boards X (left) max. Adjustable Leg
Jumbo size of 6ft x 8ft / 6ft x 12ft / 6ft x 14ft.
shall be anchored to the floor using Stainless Steel Adjustable Leg, base Ø64mm 1
(maximum 200mm away from pilaster) for stability. To improve stability of the Section X-X
Installation
system, BESCO™ recommends that length exceeding 1800mm to increase the Installation will be executed under the supervision of BESCO™’s site supervisor(s) Layout Plan of
thickness to 19mm HPL compact board. and shall be carried out in accordance with BESCO™ installation instructions. Restroom Cubicle
SS Door Knob with recess SS Coat Hook SS Thumbturn SS Lock Set Alu Door Stopper &
SS Hinge SS Spring Hinge SS Adjustable Leg Alu Top Rail Nylon Top Rail End Capping Alu U-channel Alu Corner Channel
(dia-42mm) (w/cover) (w/occupancy indicator) (w/occupancy indicator) Door Stopper Rubber Lining
BEScube System
Besco Building Supplies (SEA) Pte Ltd
26 Ubi Road 4 The Besco Building Singapore 408613
t (65) 6286 0666 f (65) 6741 3430
sales@besco.sg www.besco.sg
ZMS
strength.
Customised Fixed Panel
6
without cover and allow load up to 25kg.
High Pressure Laminates (HPL) compact board (or phenolic board) with u BESCO™ Stainless Steel Hinges with cover, adjustable from fully close Stainless Steel
chamfered edges. Stainless Steel
to open at interval of 15°. U-channel 12mm thick U-channel
u BESCO™ Stainless Steel Adjustable Leg with brushed finish has a Pilaster
HPL compact boards are manufactured from sheets of special kraft and 12mm thick
decor papers, impregnated with thermosetting synthetic resins, fused
working range from 105mm to 165mm. Stainless Steel Intermediate
Thumbturn Partition
together under heat and high pressure. HPL compact board has laminates (w/occupancy
Compartment’s Dimension
2006
1850
on both sides with either matt finish or textured finish. The performance indicator) Stainless Steel
of the board is tested according to BS EN Standards and has the following The recommended restroom cubicle size: Stainless Steel Thumbturn
rating: 800 ~ 900mm by 1500 ~ 1800mm by 2006mm (W x D x H). Hinges (w/occupancy
u Visible height of restroom compartment measured from FFL to the top indicator)
u Boiling Water (EN438-7) : 8.4 (Within max. 11.5) of the Flat Bar is 2006mm.
12mm thick Stainless Steel
u Fire Rating (EN476-6/7) : Class 1 (meet min. 1) u Door size shall be between 600mm ~ 700mm in width. Door Knob
Cubicle Door
u Impact (EN438-11) : 2.8 Newton (exceed min. 2.0) u Door size shall be between 800mm ~ 1000mm in width for ambulant
150
restroom. Finished floor level
u Stain (EN438-15) : 5 (exceed min. 4)
u Scratch (EN438-2) : 4 Newton (exceed min. 2.0) Stainless Steel Stainless Steel
Colours Adjustable Leg Adjustable Leg
It is a natural occurrence under various climatic conditions that HPL BESCO™ recommends that the System shall be of a single colour. Colour
compact boards may undergo dimensional changes of tolerance differences from Doors, Pilasters and Intermediate Partitions are available Elevation 1 Elevation 2
differences within ±5mm. upon request. The price will vary due to multiple color selections.
HPL compact boards used in our systems are certified by Singapore Size of Boards
Environment Council with Singapore Green Label. Jumbo size of 6ft x 8ft / 6ft x 12ft / 6ft x 14ft.
Doors Installation
All Doors shall be of 12mm thick HPL compact board with chamfered edge. Installation will be executed under the supervision of BESCO™’s site
Each will be supported by 3 Stainless Steel Hinges (4 Stainless Steel Hinges
for Door width ≥ 750mm or Door height ≥ 2100mm) affixed to the Pilaster,
supervisor(s) and shall be carried out in accordance with BESCO™ X
installation instructions. Stainless Steel Flat Bar
completed with Stainless Steel Coat Hook and Stainless Steel Door Knob.
Doors will be routered at its vertical ends and incorporated with Rubber
Sponge to dampen noise. The floor clearance is 150mm.
12mm thick
Part Numbers Intermediate Stainless Steel Coat Hook
Pilasters Partition
All Pilasters shall be of 12mm thick HPL compact board with router to (w/rubber stopper)
01. SS Door Knob with recess (dia-42mm)
facilitate Rubber Sponge in noise dampening and completed with Stainless
Steel Thumbturn for locking doors. The Pilaster shall be anchored to the 02. SS Coat Hook (w/cover) Stainless Steel
floor using Stainless Steel Adjustable Leg (base Ø64mm) with threaded
2 U-channel Stainless Steel Thumbturn
03. SS Tri Base Coat Hook (w/occupancy indicator)
1830
rod for stability. BESCO™ recommends standard pilaster width to be
2006
300mm and end Pilaster width to be 150mm for maximum stability. 04. SS Thumbturn (w/occupancy indicator) 12mm thick
Cubicle Door
05. SS Lock Set (w/occupancy indicator) & Pilaster
Intermediate Partitions Stainless Steel
All Intermediate Partitions shall be of 12mm thick HPL compact board 06. SS Hinge Door Knob
with Stainless Steel U-channel, 21.5mm x 14.5mm x 1mm (cross-section 07. SS Spring Hinge
dimension, L x W x Thk), affixed at its ends (to the wall and pilaster).
Finished floor level
150
To improve stability of the system, BESCO™ recommends that length 08. SS Adjustable Leg
exceeding 1800mm to be fitted with an extra Pedestal or increase thickness Stainless Steel Hinges
09. SS Flat Bar (6000mm) Stainless Steel
to 19mm HPL compact board. X (left) Adjustable Leg
10. SS U-channel (2200mm)
Top Rail 11. Black Rubber Sponge (1860mm) 1 Section X-X
Stainless Steel Flat Bar, 12mm x 6mm x 6000mm (W x H x L), shall be
section fixed onto the top of the pilaster for maximum strength, stability
and alignment of the system. Layout Plan of
Restroom Cubicle
01 02 03 04 05 06 07 08 09 10 11
BACCHUS.15.07.001
Statements and recommendations provided by BESCO™ either communicated through publication or verbally are based on empirical data and experience acquired to date. Laminated HPL panels may be subjected to changes due to application methods, substrate variations and environmental conditions.
Images appearing in our publication / website are meant to be used as reference materials. No liability may be derived from it as results may vary individually.
Besco Building Supplies (SEA) Pte Ltd l 26 Ubi Road 4 The Besco Building Singapore 408613 t (65) 6286 0666 f (65) 6741 3430 sales@besco.sg www.besco.sg
The uniqueness in Bacchus hinge lies in the interchangeable pivot pin. It allows
40
Grade 6063-T5. Anodised aluminium option is available upon request. The Top Rail
Doors, Pilasters and Intermediate Partitions shall be 12mm thick High Pressure Aluminium Top Rail Channel, 40mm x 40mm x 2mm (cross-section dimension, Conceal Conceal
Laminates (HPL) compact board (or phenolic board) with chamfered edges. U-channel 12mm thick U-channel
W x H x Thk), shall be section fixed onto the top of the Pilaster for maximum
Pilaster
strength, stability and alignment of the system. 12mm thick
HPL compact boards are manufactured from sheets of special kraft and decor 12mm thick Intermediate
Cubicle Door Partition
papers, impregnated with thermosetting synthetic resins, fused together under Accessories
2040
1850
heat and high pressure. HPL compact boards has laminates on both sides with Bacchus Bacchus Hinge Bacchus
Each restroom cubicle will be equipped with the following accessories: Latch Lock Set Latch Lock Set
either matt finish or textured finish. The performance of the board is tested u Bacchus Latch Lock Set of 160mm x 30mm x 34mm (W x H x D) (w/occupancy (w/occupancy
according to BS EN Standards and has the following rating: with occupancy indicator of 80mm x 22mm x 5.8mm (W x H x D) indicator) indicator)
u Bacchus Coat Hook allows load up to 15kg. Bacchus Door
u Boiling Water (EN438-7) : 8.4 (Within max. 11.5) Stopper
u Bacchus Door Stopper.
u Fire Rating (EN476-6/7) : Class 1 (meet min. 1)
150
u Bacchus Hinges come with a unique on-site door setting mechanism that Finished floor level
u Impact (EN438-11) : 2.8 Newton (exceed min. 2.0)
allows the door to behave normally to close fully or open at an interval of
u Stain (EN438-15) : 5 (exceed min. 4) Bacchus Pedestal
15°- 90°. It allows to be a Right or Left Hinge. Bacchus Pedestal
u Scratch (EN438-2) : 4 Newton (exceed min. 2.0)
u Bacchus Pedestal with a working range from 100mm to 180mm.
Elevation 1 Elevation 2
It is a natural occurrence under various climatic conditions that HPL compact
Compartment’s Dimension
boards may undergo dimensional changes of tolerance differences within
The recommended restroom cubicle size:
±5mm.
800mm ~ 900mm by 1500mm ~ 1800mm by 2040mm (W x D x H). X
u Height of restroom compartment measured from FFL to the bottom of the Bacchus Top Rail
HPL compact boards used in our systems are certified by Singapore Environment
Council with Singapore Green Label. Top Rail is 2000mm.
u Door width shall be between 600mm ~ 700mm for standard cubicles.
u Door width clearance shall comply with BCA’s Code on Accessibility in the 12mm thick
Doors Intermediate Bacchus Coat Hook
All Doors shall be of 12mm thick HPL compact board with chamfered edge. Each Built Environment 2013 for the following: Partition
Door will be supported by 3 Bacchus Hinges (4 Bacchus Hinges for Door width ≥ • Ambulant WC Compartment: minimum 800mm
750mm or Door height ≥ 2100mm) affixed to the Pilaster, complete with Bacchus • Accessible WC Compartment: minimum 850mm Conceal
Coat Hook and Bacchus Latch Lock Set. Doors will be routered at its vertical ends
2 U-channel Bacchus Latch Lock Set
(w/occupancy indicator)
1830
2040
and incorporated with Rubber Sponge to dampen noise. Colours 12mm thick
BESCO™ recommends that the System shall be of a single colour. Colour Cubicle Door
Intermediate Partitions differences from Doors, Pilasters and Intermediate Partitions are available upon & Pilaster
All Intermediate Partitions shall be of 12mm thick HPL compact board. It will be request. The price will vary due to multiple color selections.
Bacchus Door Stopper
secured by Conceal U-channel with cover, 27mm x 26.5mm x 1.2mm (cross
section dimension, L x W x Thk), affixed at its ends (to the wall and pilaster). Size of Boards Finished floor level
150
For ultimate stability of the system, BESCO™ recommends that length exceeding Jumbo size of 6ft x 8ft / 6ft x 12ft / 6ft x 14ft.
1800mm to increase the thickness to 19mm HPL compact board. Bacchus Hinges Bacchus Pedestal
X (left)
Installation
Conceal U-channel Cover Installation will be executed under the supervision of BESCO™’s site supervisor(s) 1 Section X-X
Conceal U-channel Cover is specially designed to conceal screw heads. It is and shall be carried out in accordance with BESCO™ installation instructions.
easily installed by snap fitting it into the U-channel. Layout Plan of
Restroom Cubicle
BACCHUS accessories
applicable for other Systems
ARTEMISceiling
ATHENAneo
SYSTEMS
TITANceiling
ARTEMIS
TITANbox
AXIS
ZMS
Bacchus Latch Lock Set Bacchus Coat Hook Bacchus Hinge Bacchus Pedestal Bacchus Door Stopper SS Spring Hinge Aluminium Top Rail Conceal U-channel Black Rubber Sponge
•
•
•
•
•
•
BEScube System
Besco Building Supplies (SEA) Pte Ltd
26 Ubi Road 4 The Besco Building Singapore 408613
t (65) 6286 0666 f (65) 6741 3430
sales@besco.sg www.besco.sg
ATHENAneo
neo
known to be a norm.
neo
the amount of materials usage, ATHENA
evolution of all ‘free-floor’ systems. Reducing
ATHENA marks the new beginning on the
129
All accessories shall be made of stainless steel grade 304 and all hardware/ fitted with an extra Pedestal or increase thickness to 19mm HPL compact
Aluminium
fittings shall be made of powder-coated aluminium grade 6063-T5. board. Aluminium U-channel
U-channel 12mm thick
Anodised aluminium option is available upon request. The doors, pilasters Pilaster
and intermediate partitions shall be 12mm thick High Pressure Laminates Accessories
Each restroom cubicle will be equipped with the following accessories: Aluminium 12mm thick
(HPL) compact board (or phenolic board) with chamfered edges. Thumbturn w/ Divider
u BESCO™ Stainless Steel Door Knob of Ø42mm with recess.
Occupancy U-channel
2129
1850
u BESCO™ Stainless Steel Thumbturn with occupancy indicator. Indicator
HPL compact boards are manufactured from sheets of special kraft and Thumbturn w/
u BESCO™ Stainless Steel Coat Hook with rubber stopper Occupancy
decor papers, impregnated with thermosetting synthetic resins, fused
Stainless Steel
allow loads up to 25 kg. Indicator
Hinges
together under heat and high pressure. HPL compact board has laminates u BESCO™ Stainless Steel Hinges with cover, adjustable from
on both sides with either matt finish or textured finish. The performance fully close to open at interval of 15°.
of the board is tested according to BS EN Standards and has the following 12mm thick Stainless Steel
Compartment’s Dimension Cubicle Door Door Lock
rating:
150
The recommended restroom cubicle size: Finished floor level
800 ~ 900mm by 1500 ~ 1800mm by 2129mm (W x D x H).
u Boiling Water (EN438-7) : 8.4 (Within max. 11.5) u Visible height of restroom compartment measured from FFL to the top
u Fire Rating (EN476-6/7) : Class 1 (meet min. 1) of the Top Rail is 2129mm. Elevation 1 Elevation 2
u Impact (EN438-11) : 2.8 Newton (exceed min. 2.0) u Door width shall be between 600mm ~ 700mm for standard cubicles.
u Stain (EN438-15) : 5 (exceed min. 4) u Door width clearance shall comply with BCA’s Code on Accessibility in
u Scratch (EN438-2) : 4 Newton (exceed min. 2.0) the Built Environment 2013 for the following:
• Ambulant WC Compartment: minimum 800mm Aluminium Aluminium
M-Top Rail M-Top Rail
It is a natural occurrence under various climatic conditions that HPL • Accessible WC Compartment: minimum 850mm
Back Cover Back Cover Front Cover
compact boards may undergo dimensional changes of tolerance
Colours
differences within ±5mm.
BESCO™ recommends that the System shall be of a single colour. Colour
differences from Doors, Pilasters and Intermediate Partitions are available
HPL compact boards used in our systems are certified by Singapore
HPL Board
HPL Board
upon request. The price will vary due to multiple color selections.
Environment Council with Singapore Green Label. X Standard Option Optional
(plain)
Size of Boards
Doors
Jumbo size of 6ft x 8ft / 6ft x 12ft / 6ft x 14ft.
All Doors shall be of 12mm thick HPL compact board with chamfered edge. Aluminium M-Top Rail
Each will be supported by 3 Stainless Steel Hinges (4 Stainless Steel Hinges
Installation 12mm thick
for Door width ≥ 750mm or Door height ≥ 2100mm) affixed to the pilaster, Stainless Steel Coat Hook
Installation will be executed under the supervision of BESCO™’s site Divider w/ rubber stopper behind
completed with Stainless Steel Coat Hook and Stainless Steel Door Knob. supervisor(s) and shall be carried out in accordance with BESCO™ the door
Doors will be routered at its vertical ends and incorporated with Rubber installation instructions. Aluminium
Sponge to dampen noise. The floor clearance is 150mm.
2 U-channel Thumbturn w/
Occupancy
1830
2129
Pilasters Part Numbers
12mm thick Indicator
All Pilasters shall be of 12mm thick HPL compact board with chamfered 01. SS Door Knob with recess (dia-42mm) Cubicle Door
edge, completed with Stainless Steel Thumbturn for locking doors. The 02. SS Coat Hook (w/cover) & Pilaster Stainless Steel
Pilaster is slotted and affixed to the Top Rail and secure from the front of 03. SS Tri Base Coat Hook Door Lock
the Top Rail. 5mm thick glass panel can be cladded onto the Pilaster upon 04. SS Thumbturn (w/occupancy indicator)
request. 05. SS Lock Set (w/occupancy indicator)
150
Finished floor level
06. SS Hinges
Top Rail Stainless Steel Hinges
07. SS Spring Hinge
Heavy-duty Aluminium M-section Top Rail Channel, approx. 85mm x X (left) Section X-X
129mm x 7mm (cross-section dimension including covers, W x H x Thk), 08. Alu M Top Rail with covers (5500mm)
shall be anchored to the wall with Mild Steel Wall Bracket. Pilaster shall be 09. Wall Bracket, M Top Rail 1
section fixed onto the bottom slot of the Top Rail for maximum strength, 10. Alu U-channel (3660mm)
stability and alignment of the system. External covers will be capped to 11. Black Rubber Sponge (1860mm) Layout Plan of
conceal fixing details. Optional of 5mm Mirror, Zenolite® Plus or HPL
Restroom Cubicle
compact board can be slotted into the external cover.
Optional of
Mirror / Zenolite® Plus / HPL
01 02 03 04 05 06 07 08 09 10 11
u Aluminium is available in white /grey powder coat or black / natural anodized finishing. u SS accessories in grade 304.
Other colours available upon request. u SS Hinges - normal is available upon request.
Formica® Compact® Grade Laminates are certified by Singapore Environment Council with Singapore Green Label. WALL MOUNT
BEScube System
Besco Building Supplies (SEA) Pte Ltd
26 Ubi Road 4 The Besco Building Singapore 408613
t (65) 6286 0666 f (65) 6741 3430
sales@besco.sg www.besco.sg
DORIC Door
situation.
provided in this system enable the fastest
DORIC Door system is a design solution to
1980
1830
indicator) indicator)
The recommended restroom cubicle size:
HPL compact boards are manufactured from sheets of special kraft and
800 ~ 900mm by by 1980mm (W x D x H). Nylon Hinges
decor papers, impregnated with thermosetting synthetic resins, fused Nylon
u Height of restroom compartment measured from FFL to the top of the Door Knob Nylon
together under heat and high pressure. HPL compact board has laminates Door Knob
D-post is 1980mm.
on both sides with either matt finish or textured finish. The performance
u Door# width shall be between 600mm ~ 700mm for standard cubicles.
150
of the board is tested according to BS EN Standards and has the following Finished floor level
u Door# width clearance shall comply with BCA’s Code on Accessibility in
rating: the Built Environment 2013 for the following:
• Ambulant WC Compartment: minimum 800mm
u Boiling Water (EN438-7) : 8.4 (Within max. 11.5) • Accessible WC Compartment: minimum 850mm Elevation 1 Elevation 2
u Fire Rating (EN476-6/7) : Class 1 (meet min. 1)
#
All door sizes do not include allowance for D-pole
u Scratch (EN438-2) : 4 Newton (exceed min. 2.0) BESCO™ recommends that the System shall be of a single colour. Colour
differences from Doors, Pilasters and Intermediate Partitions are available
It is a natural occurrence under various climatic conditions that HPL upon request. The price will vary due to multiple color selections. X
compact boards may undergo dimensional changes of tolerance
differences within ±5mm. Size of Boards
Jumbo size of 6ft x 8ft / 6ft x 12ft / 6ft x 14ft.
HPL compact boards used in our systems are certified by Singapore
Environment Council with Singapore Green Label. Installation Nylon Coat Hook
Aluminium
Installation will be executed under the supervision of BESCO™’s site D-Post
Doors supervisor(s) and shall be carried out in accordance with BESCO™
2
Nylon Lock Set
All Doors shall be of 12mm thick HPL compact board with chamfered edge. installation instructions. (w/occupancy indicator)
1980
1830
12mm thick
Each will be supported by 3 Nylon Hinges (4 Nylon Hinges for Door width ≥ Cubicle Door
750mm or Door height ≥ 2100mm) affixed to the D-post, completed with & Pilaster
Nylon Door Knob
Nylon Coat Hook, Nylon Door Knob and Nylon Lock Set. Part Numbers
01. Nylon Door Knob (dia-50mm, pair)
All Doors shall be supported by vertical Aluminium D-pole (width 33.6mm) 02. Nylon Lock Set (w/occupancy indicator) Finished floor level
150
that is anchored to the wall. Nylon hinge adapters shall be used together 03. Nylon Coat Hook Nylon Hinges
with the Hinges and secured onto the D-pole. The vertical D-pole has
04. Nylon Coat Hook (w/rubber stopper)
X (left)
incorporated an acoustic Rubber Lining to dampen noise level. The floor
clearance is 150mm.
05. Nylon Hinges 1
06. Nylon Hinge Adaptor
07. D-Post End Capping Layout Plan of Section X-X
08a. D-Post (3660mm)
08b. D-Post Rubber Lining (1830mm) Restroom Cubicle
b
a
01 02 03 04 05 06 07 08
u Aluminium is available in white /grey powder coat or black / natural anodized finishing. u Nylon is available in standard white, grey or black colours.
Other colours available upon request. u Nylon Hinges - normal is available upon request.
^ Please check with your local distributors for more information. Formica® Compact® Grade Laminates are certified by Singapore Environment Council with Singapore Green Label.
BEScube System
Besco Building Supplies (SEA) Pte Ltd
26 Ubi Road 4 The Besco Building Singapore 408613
t (65) 6286 0666 f (65) 6741 3430
sales@besco.sg www.besco.sg
MODESTYdividers
MODESTY Dividers
Accessories + Specifications + Drawings
The male needs for privacy cannot be underestimated. A lack of privacy will lead to both negative consequences in cleanliness and health
repercussions.
As a result, BESCO™ MODESTY Dividers are designed and conforms to Singapore’s National Environment Agency’s Code of Practice to
prevent Paruresis (also known as pee shyness, shy kidney, bashful bladder, urophobia or shy bladder syndrome) which is a type of phobia in
which the sufferer is unable to urinate in the (real or imaginary) presence of others.
BESCO™ MODESTY Dividers apart from being visually appealing with its clean design, it is also designed to be equally robust and maintenance
easy upon installing it in a vertical manner between two urinals. Right angle bracket
In addition to its strengths, there is also a wide range of colours for designers to choose from thus creating unlimited design possibilities.
12mm thick.
Colours selection is available from solid colours, wood-grained patterns and customisable digital print. Compact laminate panel
General
BESCO™ supply and install^ MODESTY Divider System, which is highly resistant against water, chemical and impact.
Materials
Recommended range 350mm - 500mm
Accessories shall be made of either polyamide grade 6 (nylon) or stainless steel grade 304 and all hardware/fittings shall be made of anodised from the floor level
aluminium grade 6063-T5. The accessories and hardware/fittings shall be designed with BESCO™’s features.
HPL compact boards are manufactured from sheets of special kraft and decor papers, impregnated with thermosetting synthetic resins, fused
together under heat and high pressure. HPL compact board has laminates on both sides with either matt finish or textured finish. The performance
of the board is tested according to BS EN Standards and has the following rating:
Side Elevation
It is a natural occurrence under various climatic conditions that HPL compact boards may undergo dimensional changes of tolerance differences
within ±5mm.
HPL compact boards used in our systems are certified by Singapore Environment Council with Singapore Green Label.
Height
Part Numbers
Length 2
01 02
The size of modesty divider range from
Formica Compact Grade Laminates are certified by Singapore Environment Council with Singapore Green Label.
® ® Length 2 : 200mm ~ 250mm
Breaking away from conventional metal lockers, BESCO™ lockers explores the possibilities in
the usage of High Pressure Laminated (HPL) compact boards. Unlike conventional lockers made
of wood, metal or plastic which are more prone to rot, corrosion and vandalism, HPL lockers are
amazingly durable.
Our 100% HPL compact board allows the lockers to be highly customized to suit our user requirements.
From an extensive range of colours for selection, customisable dimensions, accessories combination to design
requirements, HPL lockers are no doubt the best choice to fulfil
your storage needs. HPL Lockers
HPL Lockers
HPLockers.15.07.001
Statements and recommendations provided by BESCO™ either communicated through publication or verbally are based on empirical data and experience acquired to date. Laminated HPL panels may be subjected to changes due to application methods, substrate variations and environmental conditions.
Images appearing in our publication / website are meant to be used as reference materials. No liability may be derived from it as results may vary individually.
Besco Building Supplies (SEA) Pte Ltd l 26 Ubi Road 4 The Besco Building Singapore 408613 t (65) 6286 0666 f (65) 6741 3430 sales@besco.sg www.besco.sg
HPL Lockers
accessories + specifications + drawings
General Top Cover and Bottom Base
BESCO™ supply and install HPL Lockers System, which is highly resistant against All top and bottom base shall be white in colour, 9mm thick HPL compact board. Y
water and impact. All top covers and bottom bases shall be affixed onto the aluminium interlocking 300 300 300 300 300 300
supporting frames. 15 15
Materials
Accessories shall be made of either stainless steel grade 304 or alloy and all Accessories Keyless
hardware/fittings shall be made of anodised aluminium grade 6063-T5 (natural Each restroom cubicle will be equipped with the following accessories: Security
Number Lock
anodised coloured). The accessories and hardware/fittings shall be designed with u BESCO™ Stainless Steel Hinges (concealed and allow door swing up to 90°).
4 Digits
BESCO™’s features. u BESCO™ Choice of cylinder lock or hasp lock with polish chrome finish. Cylinder
Lock with
Coin Return and Number lock is available upon request. ‘D’ Number
Plate
HPL compact boards are manufactured from sheets of special kraft and decor u BESCO™ Aluminium interlocking support frame comprises of Aluminium
Ventilation
A
papers, impregnated with thermosetting synthetic resins, fused together under Back and Front Square Channel with Semi-round Channels. Cover
1800
1850
heat and high pressure. HPL compact boards has laminates on both sides with u BESCO™ Chrome Pipe Holder for hanging clothes available upon request
either matt finish or textured finish. The performance of the board is tested (Clothes hanger is not provided). Hasp
according to BS EN Standards and has the following rating: u BESCO™ ‘D’ Number Plate with stickers for numbering lockers (Rectangular
Lock with
Rectangular
50
: 4 Newton (exceed min. 2.0) u Door shall be either 9mm (applicable to door’s height 600mm & below)
or 12mm thick HPL compact laminate.
It is a natural occurrence under various climatic conditions that HPL compact u Back and side panels shall be 3mm thick HPL compact laminate.
Y
boards may undergo dimensional changes of tolerance differences within u All shelves shall be of 9mm thick HPL compact board. 500
Besco Lockers Range Exterior 9mm or 12mm
±5mm. u Top and bottom base shall be of 9mm thick HPL compact board.
u Customisation to requirement is available upon request. 9mm thick
HPL Laminate Board
HPL compact boards used in our systems are certified by Singapore Environment u Choice of locker systems: 1-tier, 2- tier, 3-tier, 4-tier, 5-tier and Z-tier.
as top panel
9
Council with Singapore Green Label.
300
300
352
Colours
441
Chrome Pipe
588
Doors BESCO™ recommends that the System shall be of a single colour for all Doors. Holder
732
All doors shall be either 9mm or 12mm thick solid compact board. Hinges shall Price will vary due to multiple color selections. 3 ‘Concealed’
Locker Hinges
be recessed fixed onto the doors and affixed onto the Aluminium Front Square
Channel, 30mm x 26mm (cross-section dimension, L x B). Air ventilation Holes
9mm thick
Size of Boards
9
HPL Laminate Board
as intermediate panel
(customisable to designs) or Ventilation Cover is available upon request. Jumbo size of 6ft x 8ft / 6ft x 12ft / 6ft x 14ft.
150
& shelf
1800
1850
1164
9
1164
Internal Shelves Installation 3mm thick
HPL Laminate
All shelves shall be white in colour, 9mm thick solid compact board. The internal Installation will be executed under the supervision of BESCO™’s site supervisor(s) Boardn as side,
back panel &
shelves shall be secured to the internal vertical panels and supported by the and shall be carried out in accordance with BESCO™ installation instructions.
Natural Anodised divider
Aluminium vertical
post
Semi-round Channels, 13.3mm x 21.5mm (cross-section, L x B). 9mm or 12mm
thick HPL
Laminate Board
9
as locker door
300
9mm thick
Back and Side Panels HPL Laminate Board
9
All back and side panels shall be white in colour, 3mm thick HPL compact
as bottom panel
Finished floor level
board. All panels will be inserted into the aluminium interlocking support frames 1-tier 2-tier 3-tier 4-tier 5-tier Z-tier
50
comprised of Square Front Channels, 30mm x 26mm (crosssection dimension, L Besco Lockers Range Interior Section Y-Y
x B) and Back Square Channels, 13.3mm x 21.5mm
(cross-section dimension, L x B).
Nylon ‘D’
Number Alu Front
Plate Square
Channel
Alu Back
Square
SS Ventilation Cover Channel
Chrome Padlock (Hasps) Keyless Security number Lock Coin Return Lock Cylinder Lock Chrome Clothes Hanger 35mm or 53mm Rectangular SS Hinge Alu Semi-Round Channel SS Bracket Rubber Lining
Plate
COMPACT BOARD
u Kraft Paper - A type of paper “sandwiched” to form up the thickness of the HPL board
u Phenolic Resin - A chemical acting as a gluing agent to hold the Kraft paper together
u Decor Paper - The outermost layer which is applied to give the board its appearance
u Overlay - A protective layer applied to the board’s surface for scratch resistant
Product Performance
Length
1 in = 25.4 mm 1 cm = 0.394 in
1 ft = 30.5 cm 1m = 3.28 ft
Impact Resistant Scratch Resistant Chemical Resistant
1 yd = 0.914 m 1m = 1.09 yd
3 6 9 12 19
CompactBoard.10.03.001
COMPACT BOARD
EN476-7
Test for measuring lateral spread of flame along the surface of a
specimen of a product orientated in the vertical position under
opposed flow conditions. Classification system is based on the
rate and extent of the spread of flame with test rating from 1 to
5. The lower the rating, the higher the resistant to fire.
Formica® Compact® Grade Laminates are certified by Singapore Environment Council with Singapore Green Label.
ACCESSORIES
BACCHUS Accessories
Nylon Accessories