Documente Academic
Documente Profesional
Documente Cultură
accessories
L AND ROVER
SERIES 2a & 3
This section includes our range of
Accessories suitable for the Land Rover
Series 2a and 3. We also include
T he original Land Rover rolled off the Solihull production line in 1948 and enjoyed great
success through the 1950s. The launch of the Series II in 1958 further established the
marque’s reputation for durability and practicality. It was given a new larger petrol engine,
accessories which suit popular
modifications to Series vehicles - so don’t synchromesh was added to 3rd and 4th gears and the bodywork got the shape we are so
think it’s a mistake if you see something familiar with today.
that doesn’t usually fit original vehicles,
1961 saw the introduction of the Series IIa with not many significant changes other than
because you can bet that someone has a
modified vehicle it will fit. the diesel engine getting bored out to 2.25Lt. A 12 seat Station Wagon version was launched
in 1962 which led to the demise of the 10 seat 107" model.
You’ll also see some items are A 6 cylinder 2.6Lt petrol option was the next major change introduced in 1967 together
photographed on other Land Rover vehicles with a re-designed dashboard. Export models had the headlamps moved from the grille to the
– this is simply because we didn't have a
wings in 1968 - a feature added to UK models in 1969. Also in 1968 we got the “1 Ton” Land
Series vehicle to hand when the
Rover which was given heavy duty transmission and lower gear ratios to aid with towing and
photographer called in – so just make sure
you use the right reference number when to improve off-road capabilities.
ordering or check with one of our expert The Series IIa models continued to evolve through the 1960s and many variations of
staff who will be able to advise on correct wheelbase and body style were developed to increase Land Rover’s flexibility to suit a wide
fitment. range of markets from military to agricultural and emergency services.
PARTS: Bearmach produces vehicle- This programme culminated with the introduction of Series III in 1971 - not a complete
specific catalogues listing our vast range revamp but with significant changes to the gearbox, clutch and braking systems. The Salisbury
of parts suitable for all Land Rover rear axle became standard fitment to 109" vehicles from 1972 and the electrical system was
vehicles – make sure you get the latest upgraded with an alternator replacing the old dynamo.
edition for your particular vehicle.
The Series III bodywork remained almost
CONTENTS PAGE
NOTE: Manufacturers parts numbers are unchanged although the metal grille was
used for reference purposes only. replaced with a plastic one. Inside, the Exterior Accessories
Lamp Guards 4
dashboard was now padded and the Styling 5~7
instrumentation moved in front of the driver; Off-road Protection 8
door interiors were upholstered, an improved Roof Racks, Towing & Winching 9~10
heater was added and even a radio was Performance Equipment
available as an option. Heavy Duty Suspension 11
Certificate No. RS20282
Engine 12~13
Series IIIs were produced Brakes, Axle & Steering 13~14
through to 1985, overlapping the Electrical 15~16
production of Defenders which Interior Accessories
started in 1983 – but that’s Dog Guards 16,18
Seats 17
another story… Mats 18
Workshop & Tuning
Service Kits 122~125
KAM Differentials 126~129
Diagnostics 130~138
Workshop Manuals 139~141
Gifts & 4x4 Essentials
DVDs, Toys & Gifts 142~146
Torches & Driving Lights 147~151
Electrical Accessories 152~155
Roof Racks & Towing 156~159
Winches & Off-Road Equipment 160~167
Wheels, Covers & Tyres 168~173
Parts Finder & Index 174~185
01_Series_12th_access_08:Series_12th_access_qk7 30/7/08 11:25 Page 4
L AND ROVER
SERIES 2a & 3
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
SERIES 2A & 3 nudge bars
L AMP G UARDS
Lamp Guards are more than just a cosmetic
addition to your vehicle they help protect your
valuable lights from debris thrown up by traffic in
front of you or from those inevitable knocks when
off-roading or even the supermarket car park.
FRONT LAMP
GUARDS
BA 012B – Set of 4
Rear Lamp Guards
BA 012B
BA 012C
L AND ROVER
SERIES 2a & 3
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
FOLDING STEPS
BA 172
REAR STEP
Made from heavy gauge steel and bar, then plated to give an extra durable
finish. No drilling required, bolts directly onto crossmember and can be used
in conjunction with all towing attachments. A very functional accessory.
(NOTE: the Drop Plate in the photograph is not included see page 34).
BA 132
BA 132B Spare Wheel Carrier as above but for use on soft top.
BA 019 – Plastic wheel arch set
L AND ROVER
SERIES 2a & 3
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
SERIES 2A & 3 exterior styling
BA 0202
BA 090S
BA 090 – Bumperettes
HEAVY DUTY
RRC 2971 BUMPERETTES
Suitable for Defender,
these bolt directly on to
the cross member
replacing the grab
handles. Will also fit
Series 2/3 vehicles but BA 290
requires drilling of cross
member. Made from
heavy gauge steel and HEAVY DUTY BUMPERETTES
powder coated for
durability. These heavy duty bumperettes are not only stylish but offer good protection to
Will fit with Spare Wheel the rear end and wing bottoms of your vehicle. Available black powder coated
Carrier BA 132 or galvanised. These are very practical and give your Series vehicle a very
individual look. Now with extra chequer-plate tread.
Heavy Duty Bumperettes
page 6
L AND ROVER
SERIES 2a & 3
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
DOOR MIRRORS
UNBREAKABLE
DOOR MIRRORS
BA 181 These mirrors are
awesome!!! We drove a
Defender 90 over the
mirror and it did not
break!!! Not even the the
casing broke. Ideal for off
road.
FIXED WINDOW
KITS
BA 180
EXTERIOR SUN
VISOR
Aluminium folded visor
with steel plated
brackets. Supplied as a
complete kit ready for
installation, all fixtures MUD FLAPS
and fittings plated. Visor
supplied in bright finish. BA 131 Essential equipment to prevent damage from debris thrown up by the tyres
Suitable for spraying to and to minimise water spray when driving on-road. Made from a flexible, hi-
match colour of vehicle. density rubber, supplied in pairs (fittings not included).
page 7
L AND ROVER
SERIES 2a & 3
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
PANEL PROTECTION.
SERIES 2A & 3 off-road protection
O FF R OAD P ROTECTION Bearmach provide a range of aluminium checker plate to help protect the
panels and give extra strength to the vehicle. Available for the wing tops,
bonnet, sills and rear wings. These plates also enhance the vehicle's
Although Land Rover Series vehicles were designed for appearance.
off-road use you ought to consider adding extra protection
to the vulnerable areas underneath the vehicle as well as
the bodywork. Bearmach make a variety of items all
manufactured to the highest standards and tested to BA 113
destruction to give you peace of mind when tackling the
roughest terrain.
WINGTOP
STRENGTHENER /
PROTECTOR
BA 121 Made from sturdy 2mm
aluminium 5 Bar plate,
not only do these
enhance the appearance BA 113C
DIFF GUARD of your vehicle but also
Easy to fit, applicable to all models with standard axles, Zinc plated for allow you to step on top of your wing to gain access to the roof rack.
corrosion resistance NO DRILLING required.
BA 113A Wingtop strengthener without vent hole, for Series 3.
BA 121 – Diff Guard BA 113C As BA 113A but in Black finish
BA 108 Wingtop strengthener. Shorter version coming up to the vent on
the Defender, and can be used to protect the wing top front half
ROLL CAGES on the Series 3
Standard rollbar (Body mounted) BA 108A As BA 108 but in Black finish
Bolted onto cappings. Manufactured
in tubular steel 2” (50mm) diameter
with 3.2mm wall thickness. MIG REAR WING PROTECTOR
welded with heavy mounting plates. Made from 5 Bar aluminium plate,
(Not A.R.C). Will also fit vehicle these protect the lower part of the
with standard canvas hood. Supplied rear wing from stone and gravel
for self-colour (unpainted). damage. The ideal finishing touch,
BA 2005 and as fitted to Limited Edition
BA 2005 – Standard Roll Cage models.
BA 126
SILL GUARD
Made from 5 Bar aluminium plate, these protect the sill from scuffing while
entering or leaving the vehicle, as well as stone chips and light off-road
damage. The ideal finishing touch, and as fitted to Limited Edition models.
page 8
L AND ROVER
SERIES 2a & 3
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
ROOF RACK
Self assembly roof rack. Black powder coated. Easy for transportation,
disassembles in to a small parcel for storage. Does not include ladder.
BA 007A
BA 123
OPTIONAL LADDER
A very popular addition to the roof
racks above is the optional galvanised
ROOF BARS ladder which is of similar construction
to the roof racks and is easily fitted to
Supplied in pairs, these
the back of the vehicle allowing easier
racks are suitable for
access to lift loads to the roof rack. It
carrying unwieldy items,
is fitted to the left of the rear door.
such as ladders, and can
Suits BA 007/8/7A/8A
double up as ski or bike
racks with a simple
BA 010 – Optional Ladder
attachment.
L AND ROVER
SERIES 2a & 3
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
FRONT REMOVABLE
SERIES 2A & 3 towing & winching
Towing is a vital function of a 4x4 vehicle yet can present Quick fit tow hitch – fits in
unique problems because of the higher ground clearance. seconds.
Simply slip over the front
Bearmach offer a comprehensive range of equipment bumper of your vehicle and
specifically for Land Rover Series vehicles… …for tighten the two wing nut bolts
Towballs and other Towing Accessories please see for instant towing
pages 157 - 159 capabilities.
WINCHING EQUIPMENT
For the serious off-roader a winch can be an essential
part of the kit. Bearmach stocks a wide range of
winching accessories with winch plates to suit all models
and fitments.
See our range of Winches and Winching
Accessories on pages 160 - 167
DROP PLATES
Heavy duty construction and Zinc coated to keep them looking good.
Available as Fixed or Adjustable and will accept our 50mm Towball or
Universal coupling. (Towball not included).
WINCH PLATE
Chassis mounted winch plate to suit Defender, will take 6,000 or 8,000lb
Warn winches. Mounts on top of bumper. Will not fit with air-con. Requires
drilling for fitment to Series vehicles.
BA 190
L AND ROVER
SERIES 2a & 3
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
Make Fill Tube Size Series 3 (88) Series 3 (88) Series 3 (109) Series 3 (109)
Front Rear Front Rear Note
Boge/Sachs Oil BR 1486 BR 1401
Boge/Sachs Oil BR 0643 1 Ton
Monroe Gas Magnum BR 1486M BR 1081M BR 1486M BR 1401M
Procomp Gas (+50mm) BA 2113A BA 2114A BA 2115A Use with corresponding springs
Armstrong Oil BR 1078A BR 1079A
STEERING DAMPERS
Old Man Emu Steering damper BR 22550
Bilstein Steering damper BR 2255B
POLYURETHANE
BUSH KITS
These bushes have a high capacity to bear tension and compression and have
been tested at temperatures from -100°C to +100°C. They are resistant to
deterioration and swelling caused by oil, grease or chemicals.
PARABOLIC SPRINGS BA 2073 P-U BUSH Land Rover 109" Series 3
These springs are suitable for Series2, 2a and 3 incorporating 88" and 109" BA 2073A P-U BUSH Land Rover 88" Series 3
models. Please specify your exact vehicle requirements when ordering. BR 0695P P-U BUSH Shock Absorber
Parabolic springs are supplied in pairs with all ‘U’ bolts. BR 1083P P-U BUSH Shock Absorber
BSC 075P P-U BUSH Spring Bush, Series
PART No POSITION HEIGHT INCREASE No OF LEAVES
BSC 089P P-U BUSH Chassis Bush, Series 88"
BA 2113 Front 20mm 2
page 11
L AND ROVER
SERIES 2a & 3
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
SERIES 2A & 3 special performance
Performance flywheel.
These lightweight
performance flywheels
come balanced and ready
to fit to your tuned V8
engine. Uses 91/2" clutch
BA 2031 – Flywheel to
suit V8
engines
CLUTCH RELEASE
CAMSHAFTS BEARING
Designed to increase engine power.
The heavy duty metal sleeved clutch
BA 2186 Camshaft to suit 3.5/3.9 release bearing uses the older
(+18 - 22BHP) specification clutch bearing and a
metal sleeve to proved increased
PERFORMANCE CRANKSHAFT DRIVE TRAIN KIT durability.
page 12
Consists of forged cam gear, crank gear and heavy duty timing chain.
(Does not include Camshaft) BR 2295M – Metal clutch release
BA 2179 – To suit 3.5/3.9 V8 bearing.
L AND ROVER
SERIES 2a & 3
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
WEBER CARBURETTORS
– BRAKES
carburettor for you. (21/4 Series 3 engines)
L AND ROVER
SERIES 2a & 3
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
DETROIT TRUE
TRAC*
This unit features a gear-
type limited slip design (no
clutch or friction plates to
wear out). Its positive gear
action automatically splits the torque with none of the steering problems
associated with other traction ‘diffs’. Power transfer is so smooth that it is
DETROIT DIFF unnoticeable through the steering wheel when fitted in front drive steering
LOCKER* axles.It performs as a standard differential on normal highway driving – then
The Detroit Locker is a automatically engages when needed in wet, muddy or icy conditions. Includes
fully automatic locking carrier Bearings.
traction differential that is well known for premium performance and
dependable operation. Preload devices between the side gears deliver 100% Truetrac Diff Locker
torque and power to both drive wheels yet unlock automatically to permit BA 209 to suit Rover Differential (10 spline – Rear)
necessary wheel speed differentiation. The Detroit Locker is trouble-free as it BA 209F to suit Rover Differential (10 spline – Front)
does not require service adjustments or special lubricants. Easy to install, no
special tools or case modifications required. One year Limited Warranty.
* NOTE
For fitment to 4:7:1 Ratio diffs a spacer ring and bearing collars
are required for all the above items.
Required to allow fitment of above Diff Locks on vehicles with a 4:7:1 ratio
diffs. Includes extended bolts to suit relevant vehicles.
L AND ROVER
SERIES 2a & 3
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
HEAVY DUTY COOLING To fit any of the above kits you will also need:
BA 140 Ignition module
HEAVY DUTY WATER PUMP
A super efficient modified design of pump which ensures optimum
circulation.The pump features special seals and a pressed steel impeller. It is
a direct replacement to the standard 4 Cyl Series 2a and 3 Petrol & Diesel
replacing ERC9178/RTC6328. Please note this pump will not replace the 7
hole military pumps.
BA 031 Secondary Electric fan Kits. Suitable for all Land Rovers
BA 031A Primary Double Electric fan Kit. For extra cooling
BA 027A – Radiator Muff to suit Series 2 and early Series 2a BA 031K Replacement Fitting Kit to suit above
BA 028 – Radiator Muff to suit Series 3 BA 031T Thermostat to suit above
L AND ROVER
SERIES 2a & 3
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
I NTERIOR A CCESSORIES
It’s all very well having the best vehicle for
some off-road adventures but here’s a few
creature comforts to enhance your Series
vehicles’s interior.
INERTIA REEL
SEAT BELTS
3 point cap and diagonal.
Use as replacement for
90/110 or as retro kit for
earlier models. Early vehicles may
require additional brackets.
BA 2420
HEATED REAR WINDOW
Heated Rear Window (Triplex). Suitable for vehicles with rear station wagon
doors.
BA 075
L AND ROVER
SERIES 2a & 3
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
SEATS
Bearmach have a full range of
DE-LUXE
FRONT SEATS
These seats were originally
offered to the Series II/III
BR 1073 owner as an upgrade option from
the standard seats.
STANDARD FRONT
SEATS
Supplied with new collar bolt fittings
The outer seat bases and backs are the same
size while the centre is approx 3" narrower
Steel backed as original
BR 2080
L AND ROVER
SERIES 2a & 3
Parts and Accessories suitable for All Land Rovers from BEARMACH Ltd
BA 2170
BA 076/2
DOG GUARD
Dog Guard to suit Series vehicles and Defenders - consists 50mm mesh
REAR WINDOW MESH GUARD
welded to a sturdy box section frame. Minimum effort required to instal and
For added security this set of window guards is constructed from a sturdy
easily removed by two thumb wheels when not in use. Can be used as Gun
metal grid, black nylon coated. Covers rear door window and the two rear
rack support and acts as a cargo load divider. Black nylon coated.
quarter panels.
BA 076/2 – Dog Guard
BA 2170 – Set of 3 pieces
BA 091
the other