Documente Academic
Documente Profesional
Documente Cultură
1
NEW: Smart What you need
• Empty transponder
2
Step 2 - Set number of
keys to learn and insert
every key into ignition
Press number of keys - program asks you
how many keys you want to learn (total).
It means all working keys plus all new keys.
Enter number of keys and press YES.
DONE
When you have no working key, SuperVAG
Step 4 - confirm all has easy and fast sollution for All key lost
situation too. You do not need expensive
changes programmer or to do any soldering. Su-
Last step - keys are now learned. But pro- perVAG has developed special click-on ca-
gram still keeps old data untill you confirm bles SVG149 and SVG157 to solve such a
changes. In this step, first check that engine situation.
starts with every key. Than look at dashboard
if you can see odometer state/value. If you See section All key lost for more details.
can not see odometer state and there is still
key counter for example 1–6 that mean key
learning was not successfull and dashboard
did not finish key programming mode - as
you can see on following picture.
3
All Key
Lost Solution
Procedure
If you are in the All Key Lost situation (with
no working key), the data cannot be read. You
must get the instrument cluster into the Ser-
vice mode all first using special designed clip-
on cables SuperVAG SVG 149 for NEC dash-
boards or SVG 157 for MICRONAS dashboards
(without this device you cannot continue).
NOTE: For dashboards Magneti Marelli,
After you finish All key lost procedure, dash- there is possible to add key just with direct
board is unlocked and you can get into key programming via OBD even without
programming mode and start direct key valid key.
programming.
4
Latin America Step 2 - Start key
► Volkswagen Fox, Spacefox, Saveiro, Gol,
programming
Suran
Europe
► Volkswagen Golf, Caddy, Polo, Touran,
Transporter, Sharan
► Seat Leon, Alhambra, Ibiza, Altea
► Skoda Fabia, Roomster, Octavia, Superb
Step 1 - Conditions
and preparation
► Car have no working key in ignition
► If you have at least one working key, you Select car model and click on Key
can skip this procedure and go for Direct programming button
key programming
► You have to dismount the instrument
cluster from the car and remove the back
cover
► Connect special cable SVG 149 for dash-
boards NEC or SVG 157 for dashboards
Micronas. Connect this SuperVAG cable
to the SuperVAG USB interface and pow-
er supply (12V)
Step 4 - Connect
pogo pin
Now follow program instructions. Pro-
Clip-on cable SVG 157 for MICRONAS gram tells you to turn switch on SVG cable
dashboards to position 0. Display goes OFF.
5
SuperVAG USB interface connect to the dashboard
PIN positioning
6
DONE
Now you can go on direct key programming
and continue with learning of new keys.
SEE MORE
For more information, check our webpage www.supervag.com or go on https://www.youtube.
com/user/carsoftbrno for video manuals.
©2016 HR Carsoft s.r.o. | www.supervag.com | Author: Jan Švehla | Photos: Archiv SuperVAG