Documente Academic
Documente Profesional
Documente Cultură
IIA
The company designs and produces Traditional products Specific product installations
all kind of electromechanical works Gates, Stop logs, cranes, Racks, Special lifting systems, maneuver
for the hydropower sector and par- Trash racks, Linings, pipes, bi- chamber, special coatings, bridges,
ticularly, products for the intake and trifurcations, Penstock Safety project assembly equipment, work-
aqueducts. valves, Cone jet valves, Butterfly shop equipment, lifting and move-
Gates
Depending on the size and type of use of these gates, the
product could have different shapes, such as: flat to slip,
wagon (wheeled, box, radial, disc, etc.) and could have
different types of “set in motion” (manual with electric mo-
tor, hydraulic piston / pneumatics, bike chain with reduc-
ers, fixed or movable counterweight, own weight gravity).
The dimensions can vary from 1.00m x 1.00m to 20m x
20m ; and plus, water-bearing from 0 to 10 mca for spill-
way radial gates and stoplogs. Our highly specialized engi-
neering team and technology, give us the possibility to al-
low any kind of projects worldwide.
Generally our seals profiles are type "omega", but it can be
tailor made with other specs . The materials used for these
products are: rubber, EPDM or neoprene, coated or less
than a film of Teflon (PTFE) to reduce friction.
Pirris Dam– Costa Rica
Pipes
Steel Pipes transports the water from
the intake to the Machine-House, par-
ticularly to the turbines.
hydraulic calender
ness of 20 mm, 12 meters longitude- with an automatic process, in a variable time from 50 minutes to 2 hours
maximum.
Stoplogs
The stop logs are built by one or more horizontal
elements, depending on the dimensions and
weights required to move them. The stoplogs, are
the barriers that are commonly used to facilitate
the assembly of the Gates and other equipment
located downstream (in dry conditions), in order
to perform maintenance and provide security con-
ditions for the personnel.
Normally one of the elements of the stoplogs are
equipped with bypass valve, to allow the flooding
of the compartments (at the end of the works),
and then remove the elements with balanced
load.
The stop logs composed of a single element can be
moved with winches, lifting and pulling equip-
ments. If it’s composed by more than one element,
then is necessary to use an “expansion joint” en-
gaging elements - from their storage to the posi-
tions within the guidelines.
Kerrada Dam– Algeria
Trash Racks
Trash Racks machines are intended to remove trash
material from the Racks, which blocks the flow of water.
There are different types of Trash Racks (TR):
1. Mesh rotary drum (where maximum filtration is re-
quired);
2. Band (a band crosses the flow, intercepts the foreign
matter and discharge it in other place);
3. Comb: piston moved, the comb removes foreign
matter that obstructs the racks, and the mechanism
could be fixed or can be moved across to cover the en-
tire surface.
4. Cable: composed with a cart cleaner (comb and jaw)
and an upper Portico, vertical deployment unlimited ,
considering that the movement is guaranteed by wires
and winches located in the Portico.
We always bring the state of the art technology and solu-
tions in a wide range of possibilities from simple dash-
boards, even using PLC touch-screen electronics and con-
trol, which facilitates operations and human-machine inter- Trash Rack manafacturing at IIA
faces.
Valves
The IIA has engineering and technology capabili-
ties to design and manufacture the following
valves:
1. Gate valve: the shutter in fully open position
releases the flow area. Manufactured in steel up
to DN1200-PN10;
2. Butterfly valve: with motion reducer, piston or
counterweight. Manufactured up to DN3550,
with counterweight (DN2400 and DN2600) and up
to 25 and 40 bar pressure;
3. Check valve/ Non-return valve: used down-
stream for large pumping systems. Dimensions
have been manufactured between DN800 -
DN1000 and PN16 - PN25;
4. Howell Bunger valve: modulates the flow
through a moving cone and reduces the free sec-
tion. Manufactured up to DN1500 PN16;
Xacbal Dam - Guatemala DN3550
5. Larner Johnson valve: sink valve and flow con-
trol used for the environmental flow. Manufactured up to DN700 PN10.
Cranes
IIA designs and manufactures gantry cranes
and special cranes over rails for: maintenance,
gates operations, valves and other equip-
ments.
Racks
Fabricated with plane profiles, separated from each and
fixed in frames - according to the specifications of the cli-
ent.
mation to Production facility, ensuring the complete control between the designing until On-site assembly
operation.
13
Our Experience
14
Our Experience
15
Our Experience
ITALY
Via Ca´ Corner, Sud, 41
30020, Meolo (VE)- Italy
www.iia-tech.com HONDURAS
INHDELVA Free Zone
800 metros desvío a la Jutosa
Choloma, Honduras
info@iia-tech.com Central America
Call Center +504 2617-0461