Sunteți pe pagina 1din 5

Date: Name:_______________________________

Score:_____________

OSHA 500 Post Test

1. What year was the OSH Act promulgated?

a. 1968
b. 1969
c. 2001
d. 1970

2. What is OSHA’s highest inspection priority?

a. Fatalities
b. Complaints
c. Focused inspections
d. Imminent danger

3. Which of the following is not a type of OSHA violation?

a. Serious
b. Repeated
c. Other-than-Serious
d. Willful
e. Major

4. Which type of classes is an outreach trainer qualified to instruct?

a. 5 and 10 hour classes


b. 10 and 20 hour classes
c. 10 and 30 hour classes
d. 20 and 40 hour classes

5. Which of the following would not be cited under OSHA’s multi-employer worksite policy?

a. Controlling
b. Exposing
c. Correcting
d. Creating
e. Contributing

6. In steel erection, the controlling contractor must provide which of the following written
notifications?

a. Hoisting and rigging provisions


b. Site preparation provisions
c. Any repairs, replacement and modifications to anchor bolts
d. Crane certification

7. In multiple lift rigging, what it the maximum number of members, which can be hoisted per lift?

a. 3
b. 5
c. 7
d. Any number as long supervised by a competent person

8. Which of the following is not considered conventional fall protection under the Subpart M?

a. Guardrails
b. PFAS
c. Safety monitor
d. Safety nets

9. Which of the following is prohibited on a personal fall arrest system?

a. Locking snap hook


b. Anchorage
c. Body belt
d. Body harness

10. How long before the OSHA 500 trainer card must be renewed?

a. One year
b. Three years
c. Four years
d. Trainer cards do not expire

11. At what height is fall protection required on scaffolds?

a. Four feet
b. Six feet
c. Ten feet
d. Twenty feet
e. Determined by competent person only

12. What materials are acceptable for counterweight on suspended scaffolds?

a. Sandbags
b. Bundles of shingles
c. Bags of concrete
d. Only those items specifically designed as counterweights

13. What is not an acceptable system for cave-in protection in trenches?

a. Sloping
b. Benching
c. Shoring
d. Plywood sheets firmly placed with two by fours

14. What is the minimum distance a spoil pile must be placed from an excavation?

a. Two feet
b. Four feet
c. Ten feet
d. Twenty feet
15. When an employee brings his/her own personal tools, equipment, or personal protective equipment
on the job, who is responsible for ensuring the safety of such tools, equipment or personal protective
equipment?

a. The employee
b. The union
c. The employer
d. The foreman

16. Outreach classes must be completed within what period of time?

a. One week
b. One month
c. Six months
d. One year
e. No set limit

17. What is the minimum safe distance from energized overhead power lines?

a. 10 feet
b. 15 feet
c. 20 feet
d. 10 feet 6 inches

18. What must be completed prior to start of demolition operations?

a. Erection of canopies
b. Installation of temporary lighting
c. Engineering survey made by a competent person
d. Installation of decontamination facilities

19. What must be determined before loads can be placed on concrete?

a. Air content of concrete


b. Proper water/cement ratio
c. Structure is capable of supporting the loads
d. All shoring has been removed

20. When transporting gas welding cylinders, the cylinders must be:

a. Secured in a horizontal position.


b. Secured in a vertical position.
c. In the bucket of a backhoe.
d. Secured with the regulators in place.

21. With the boom lowered and in transit, what is the minimum safe distance from power lines for
cranes.

a. 10 feet
b. 12 feet
c. 9 feet
d. 4 feet
22. What is the minimum height for fall protection for all employees during steel erection operations?

a. Six feet
b. Ten feet
c. Fifteen feet
d. Twenty feet
e. Thirty feet

23. Accessible areas within the swing radius of the crane must be?

a. Evaluated by a competent person


b. Supervised by a safety monitor
c. Approved by a qualified crane operator
d. Barricaded to prevent an employee from being struck by the crane

24. Hazard Communication requirements for construction work are:

a. Not applicable to construction work


b. Determined by a competent person qualified in industrial hygiene
c. Identical to those set forth in 1910.1200 for general industry
d. Apply only to container labeling

25. Compressed gas cylinders used in welding must be stored at least _________ feet from highly
combustible materials.

a. 5 feet
b. 10 feet
c. 20 feet
d. 40 feet
Post Test Answer Key

1. D
2. D
3. E
4. C
5. E
6. C
7. B
8. C
9. C
10. C
11. C
12. D
13. D
14. A
15. C
16. C
17. A
18. C
19. C
20. B
21. D
22. E
23. D
24. C
25. C

S-ar putea să vă placă și