Raising the height of Custom Boundary Wall including providing razor blade barbed wire fencing from Jetty
Gate No 04 to dock office
Unit Price Total Price
Item No Description of Item Unit Quantity In figures In Figures (BDT) (BDT) Labour for taking out barbed wire from fencing 1 and stacking the same as per direction. Rm 58950
Labour for cutting M.S Y-Shaped angle by
2 hacksaw or gas cutter as per direction (Small Nos 1500 size).
Labour for ordinary MS work including cutting to
3 standard sizes excluding welding as per direction. Kg 1500
Dismantling brick masonry in ground floor in
cement mortar of any proportion including removing debris to a safe distance and scaffolding 4 etc. complete (Debris and the released bricks to Cum 5 be carried by head lead).
Brick works with first class bricks in cement sand
(F.M. 1.2) mortar (1:4) in exterior walls including filling the interstices with mortar, raking out joints, cleaning and socking the bricks at least for 24 hours before use and washing of sand, necessary scaffolding, curing at least for 7 days etc. all complete including cost of water, electricity and other charges (measurement to 5 given as 250 mm width for one brick length and 375 mm for one brick and a half brick length) accepted by the Engineer.
5a Add for each additional floor up to 5th floor. Cum 375
Reinforced cement concrete works using steel shutter with minimum cement content relates to mix ratio 1:1.5:3 having minimum f'cr = 30 Mpa, and satisfying a specified compressive strength f? c = 25 Mpa at 28 days on standard cylinders as per standard practice, best quality Sylhet sand or coarse sand of equivalent F.M. 2.2 and 20 mm down well graded stone chips, making, placing shutter in position and maintaining true to plumb, mixing with standard mixer machine with 6 hopper, fed by standard measuring boxes, compacting by vibrator machine and curing at least for 28 days, all complete approved and accepted by the Engineer.
6a Concrete Cum 135
Formwork/shuttering, prop and necessary 6b supports etc. (steel) Sqm 1000 Supplying and fitting fixing MS deformed bar reinforcement of required sizes (having minimum yield strength, fy= 60,000 psi) including fabrication, bending, binding with wire, erection, 7 hooking etc. complete as per design and direction Kg 20000 (No measurement for over lapping/ lapping).
Mild steel Grade 250 with minimum fy = 250 MPa
work in roof truss: supplying and fabrication of mild steel sections as per design. Hoisting, fitting and fixing in position with bolts and nuts or rivets or welded and providing two coats of anti- corrosive paint over a prime coat of red oxide 8 paint etc. complete and accepted by the Kg 16000 Engineer. (Measurement to be given for Truss member only).
Minimum 12 mm thick cement sand (F.M. 1.2)
plaster (1:4) with fresh cement to wall both inner- and outer surface, finishing the corner and edges including washing of sand cleaning the surface, scaffolding and curing at least for 7 days, cost of 9 water, electricity and other charges etc. all Sqm 4000 complete in all respect as per drawing and accepted by the Engineer.
Welding charges to MS works such as MS pipes,
10 MS angles, MS flat bars etc. as per direction. Rm 900
Welding charges to MS works such as MS angles,
11 MS Plates, GI pipes etc. up to (25mm x 25mm) as Point 6000 per direction.
Supplying & fitting fixing MS pointed rod barrier/
fencing at the top of custom boundary wall with (63mm x 63mm x 6mm) MS angles, 13mm dia and 103mm long MS tempered spikes @ 50mm c/c including welding perpendicularly both sides of rod with MS anchor @ 305mm c/c, both ends of angle to be welded with the barbed wire 12 fencing posts as required complete in all respects Rm 1200 as per design, drawing No- CE- S/J- 429; date- 23/05/2001 and direction.
Cutting 19mm dia rivets, MS angle by chisel and
13 hammer as per direction. Nos 30000 Providing 12 SWG galvanized steel barbed wire in fencing including fitting-fixing with stays or same size of galvanized wire 152mm apart barbs etc. 14 complete job as per direction. Rm 69600 Supplying and fitting fixing 600mm dia circular type Razor blade binded wire (Importyed and S.S made) @ 152mm c/c wire distance as per 15 direction and accepted by the Engineer in charge Rm 1500 etc.
Painting to door and window frames and shutters
in two coats with approved best quality and colour of synthetic enamel paint delivered from authorized local agent of the manufacturer in a sealed container, having highly water resistant, high bondibilty, flexible, using specific brand thinner applied by brass/roller/spray over a coat of priming elapsing time for drying including surface cleaning from dust, oil or dirt, 16 smoothening, finishing and polishing with sand Sqm 2500 paper and necessary tools, scaffolding, testing charges etc. all complete in all floors approved and accepted by the Engineer.
On exterior surface applying as per manufacturer
instructions 3 coat of weather coat of approved quality and colour delivered from authorized local agent of the manufacturer in a sealed container 17 complete in all respect in all floors and accepted Sqm 15315 by the Engineer.
Labour for fitting fixxing M.S pointed rod barrier
18 fencing at the top of custom boundary wall etc. Sqm 125 as per direction.
Scrapping out and cleaning moss, old colour
wash, smoke marks from wall or ceiling etc. 19 complete (Measurements to be given for Sqm 7660 scrapping area only).
Carriage of glass, released doors, windows, pipes
and other same materials etc. including loading, 20 unloading and carriage to a selected places etc. as per direction.
20a Up to 3(three) km by small truck. Trip 15
Cleaning and dressing the site before and after work including leveling, dressing, widding out grass, up-rooting trees up to 150mm dia., cutting jungles, bailing out water, removing all refuges 21 LS 1 etc. to a safe distance as per direction