Documente Academic
Documente Profesional
Documente Cultură
SolidWorks-CADAS interface
0
SolidWorks 2010 or before - CADAS/Geo interface configuration
The parts and assembly formed data which were created before [ SolidWorks 2010 ] are changed into the
analysis formed data of CADAS/GEO.
* For installation in the Windows7 OS, perform installation with Administrator account or an account having administrator privilege.
The parts and assembly formed data which were created henceforth [ SolidWorks2011 ] are changed into the
analysis formed data of CADAS/GEO.
* For installation in the Windows7 OS, we recommend that you perform installation with Administrator account or an account
having administrator privilege.
※ **: 32 or 64
※XX is a version of SolidWorks.
※ XX is a version of SolidWorks.
2
SolidWorks2010 or before - CADAS/Geo interface conversion screen
Language could be choosen
from English and Japanese
The file after conversion is specified. Feature is controlled based on a lower parameter.
.
Feature is not controlled.
3
SolidWorks2011 or subsequent ones - CADAS/Geo interface conversion screen
Limitations
Execute conversion ※1 Please save after ending CADAS/GEO, when saving the model of SolidWorks
after CADAS/GEO conversion.
※2 The material information set up by SolidWorks is changed into CADAS/Geo.
The conditions of the form simplification by feature A convertible property value is “Young's modulus”, “Poisson's ratio” ,“density.“
control are set up from the screen of the right figure. The unit after conversion is not based on the situation of the unit system of SolidWorks,
but a size is carried out at mm and weight carries out unit conversion at kg.