on fatigue properties for TIG welded austenitic stainless steels at cryogenic temperatures. Cryogenics, 40, 251-259 2. Norman, A. F., Drazhner, V., & Prangnell, P. B. (1999). Effect of welding parameters on the solidification microstructure of autogenous TIG welds in an Al- Cu-Mg-Mn alloy. Materials Science and Engineering: A, 259(1), 53-64. 3. Song, J. L., Lin, S. B., Yang, C. L., & Fan, C. L. (2009). Effects of Si additions on intermetallic compound layer of aluminum-steel TIG welding-brazing joint. Journal of Alloys and Compounds, 488(1), 217-222. 4. Wang, Q., Sun, D. L., Na, Y., Zhou, Y., Han, X. L., & Wang, J. (2011). Effects of TIG Welding Parameters on Morphology and Mechanical Properties of Welded Joint of Ni-base Superalloy. Procedia Engineering, 10, 37-41. 5. Kumar, A., & Sundarrajan, S. (2009). Optimization of pulsed TIG welding process parameters on mechanical properties of AA 5456 Aluminum alloy weldments. Materials & Design, 30(4), 1288-1297. 6. Preston, R. V., Shercliff, H. R., Withers, P. J., & Smith, S. (2004). Physically based constitutive modelling of residual stress development in welding of aluminium alloy 2024. Acta Materialia, 52(17), 4973-4983. 7. Akbari Mousavi, S. A. A., & Miresmaeili, R. (2008). Experimental and numerical analyses of residual stress distributions in TIG welding process for 304L stainless steel. journal of materials processing technology, 208(1), 383-394. 8. Durgutlu, A. (2004). Experimental investigation of the effect of hydrogen in argon as a shielding gas on TIG welding of austenitic stainless steel. Materials & design, 25(1), 19-23. 9. Rui, W., Zhenxin, L., & Jianxun, Z. (2008). Experimental Investigation on Out-of-Plane Distortion of Aluminum Alloy 5A12 in TIG Welding. Rare Metal Materials and Engineering, 37(7), 1264-1268. 10. Li, D., Lu, S., Dong, W., Li, D., & Li, Y. (2012). Study of the law between the weld pool shape variations with the welding parameters under two TIG processes. Journal of Materials Processing Technology, 212(1), 128-136. 11. Lu, S. P., Qin, M. P., & Dong, W. C. (2013). Highly efficient TIG welding of Cr13Ni5Mo martensitic stainless steel. Journal of Materials Processing Technology, 213(2), 229- 237. 12. Urena, A., Escalera, M. D., & Gil, L. (2000). Influence of interface reactions on fracture mechanisms in TIG arc-welded aluminium matrix composites. Composites Science and Technology, 60(4), 613-622. 13. Sivaprasad, K., & Raman, S. (2007). Influence of magnetic arc oscillation and current pulsing on fatigue behavior of alloy 718 TIG weldments. Materials Science and Engineering: A, 448(1), 120-127. 14. Xi-he, W., Ji-tai, N., Shao-kang, G., Le-jun, W., & Dong-feng, C. (2009). Investigation on TIG welding of SiCp-reinforced aluminum-matrix composite using mixed shielding gas and Al-Si filler. Materials Science and Engineering: A, 499(1), 106-110. 15. Qinglei, J., Yajiang, L., Puchkov, U. A., Juan, W., & Chunzhi, X. (2010). Microstructure characteristics in TIG welded joint of Mo-Cu composite and 18-8 stainless steel. International Journal of Refractory Metals and Hard Materials, 28(3), 429-433. 16. Lothongkum, G., Viyanit, E., & Bhandhubanyong, P. (2001). Study on the effects of pulsed TIG welding parameters on delta-ferrite content, shape factor and bead quality in orbital welding of AISI 316L stainless steel plate. Journal of Materials Processing Technology, 110(2), 233-238. 17. Tatar, C., Ozdemir, N. (2010). “Investigation of thermal conductivity and microstructure of the a-Al2O3 particulate reinforced aluminium composites (Al/Al2O3 - MMC) by powder metallurgy method”. Physica B Condensed Matter. Vol.405, pp.896-899. 18. Pradeep, R., Praveen Kumar, B.S and Prashanth: Evaluation of mechanical properties of aluminium alloy 7075 reinforced with silicon carbide and red mud composite, International Journal of Engineering Research and General Science, Vol. 2,Issue 6, (1081-88), 2014. 19. Yashar javadi, Masoud Ashoori “Sub surface stress measurement of cross welds in a dissimilar welded pressure vessel”, materials and design 82-90 Elsevier, 2015. 20. Navid Moslemi,Norizah Redzuan” Effect of Current on Characteristic for 316 Stainless Steel Welded Joint Including Microstructure and Mechanical Properties”. 12th global conference on suitable manufacturing, Procedia 560-564, Elsevier, 2015. 21. Anil Hemant Bhajantri”, Robust design approach to set the process parameter of TIG welding” advanced engineering and applied science international journal,5(3):46-52,2015. 22. A.Sivasankaran ”Taguchi Optimization of TIG Welding for Maximizing Weld Strength of Aluminium 8011” International Journal of Innovative Research in Science, Engineering and Technology, Vol. 4, Special Issue 6, May 2015. 23. Lokesh Kumar G, Karthikeyan.”Microstructure and mechanical properties of ASS (304) and FSS (430) dissimilar joints in SMAW & GTAW process, IJESRT, 4(6): june, 2015. 24. P.Bharath, “Optimization of 316 stainless steel weld joint characteristics using Taguchi Technique”, 7th International Conference on Materials for Advanced Technologies, May 2014. 25. Rajkumar.V” Studies on welding of maraging steels”, 7th international conference on materials for advance technology, Elsevier, 2014. 26. V.Anand Rao” Experimental Investigation for welding Aspects of Stainless steel 310 for the process of TIG Welding” 12th international conference on materials for advance technology, Elsevier, 2014. 27. K.Devendranath Ramkumar” Influence of filler metals and welding techniques on the structure property relationships of Inconel 718 and AISI 316L dissimilar weldments”, materials and design 82-90 Elsevier, 2014. 28. Madduru Phanindra Reddy ”Assessment of Mechanical Properties of AISI 4140 and AISI 316 dissimilar weldments” 7th international conference on materials for advance technology, Elsevier, 2014. 29. P.Mithilesh” Investigations on dissimilar weldments of Inconel 625 and AISI 304” 7th international conference on materials for advance technology, Elsevier, 2014. 30. Arivarasu M, K. Devendranath Ramkumar and N. Arivazhagan. "Comparative Studies of High and Low Frequency Pulsing on the Aspect Ratio of Weld Bead in Gas Tungsten Arc Welded AISI 304L Plates." Procedia Engineering 97 (2014): 871-880. 31. Vikas Chauhan, Dr. R. S. Jadoun and Ankur Singh Bist, “Parametric optimization of MIG welding for stainless steel and low carbon steel using Taguchi design method”, International journal of engineering sciences & research technology, July (2014), 3(7), pp.- 614-620. 32. Kiaee, N., and M. Aghaie-Khafri. "Optimization of gas tungsten arc welding process by response surface methodology." Materials & Design 54 (2014): 25-31. 33. Pradip D. Chaudhari and Nitin N. More, “Effect of welding process parameters on tensile strength”, IOSR journal of engineering, May (2014), Vol. 04, Issue 05, pp.- 01-05. 34. C. N. Patel and S. Chaudhary “Parametric Optimization of Weld Strength of Metal Inert Gas Welding and Tungsten Inert Gas Welding by using Analysis of Variance and Grey Relational Analysis”, International Journal of Research in Modern Engineering and Emerging Technology, (2013), Vol. 1, No. 3. 35. Monika K., Bala Chennaiah M., Nanda Kumar P. and Prahalada Rao P., "The Effect of Heat input on the Mechanical Properties of MIG Welded Dissimilar Joints" International Journal of Engineering Research & Technology (2013), vol 2, pp. 1406-1413. 36. Pawan Kumar, B. K. Roy and Nishant, “Parameters optimization for gas metal arc welding of austenitic stainless steel (AISI 304) & low carbon steel using Taguchi’s technique”, International journal of engineering and management research, August (2013), pp.-18-22.