Documente Academic
Documente Profesional
Documente Cultură
AU OPTRONICS CORPORATION
() Preliminary Specification
( V ) Final Specification
Approved by Prepared by
Record of Revision
Version and Date Page Old description New Description Remark
0.0 2011/5/24 First Edition for Customer N/A
1.0 2011/7/19 5 All input signals are LVDS interface All input signals are LVDS interface
and this module doesn’t contain an and this module contains with an LED
inverter board for backlight. driver for backlight.
o
5 Operating: 0 to +50 Operating: 0 to +60(+60 C as panel
surface temperature)
11 Operating Temperature max: +50 Operating Temperature max: +60
11 NA Note 4
14 Parameter guideline for LED Inverter Parameter guideline for LED driver is
o o
is under stable conditions at 25 C under stable conditions at 25 C
23 THO: Ta= 50 oC, 50%RH, 300hours THO: Ta= 60 oC, 300hours
Vertical (Up) 70 80 -
CR = 10 (Down) 70 80 -
Viewing Angle [degree] 1,2
Horizontal (Right) 75 85 -
CR = 5 (Left) 75 85 -
Vertical (Up) 75 85 -
CR = 5 (Down) 75 85 -
Photo detector
Measured distance
100
90
Optical
White Black Black White
response
10
0
1 Frame 1 Frame
RGBRGB
Gray Level = L127
RGBRGB
Gray Level = L0
RGBRGB
Amplitude
DC
Time
AC Level(at 30 Hz)
Flicker (dB) = 20 log
DC Level
Mating Type:
FI-X30HL (Locked Type)
47K
C1
1uF/16V
(High to Low)
D1
D2
D5
D6
Control
Signal Q3
R2 AO6402
G
1K
S
C3
2
+12.0V
SW1
SW MAG-SPST VR1 0.01uF/25V
1
47K
C2
1uF/25V
90% 90%
T T T1 T1 T1
90% 90%
1 2 1 2 3
Signal
10% 10%
90%
90%
VLED
10% 10%
T T T T
90%
4 5 8 9
Back light dimming
10%
T T
6 790%
Back light on/off
10%
T T1
3 Value 0
Parameter Units
Min. Typ. Max.
T1 0.5 - 10 [ms]
T2 0 40 50 [ms]
T3 200 - - [ms]
T4 0.5 - 10 [ms]
T5 10 - - [ms]
T6 10 - - [ms]
T7 0 - - [ms]
T8 10 - - [ms]
T9 - - 10 [ms]
T10 110 - - [ms]
T11 0.5 16 50 [ms]
T12 - - 100 [ms]
T13 1000 - - [ms]
Physical interface is described as for the connector on module. These connectors are capable of
accommodating the following signals and will be following components.
G156XW01 V1
Note 2: For RoHS compatible products, AUO will add for identification.
Note 3: For China RoHS compatible products, AUO will add for identification.
Note 4: The Green Mark will be presented only when the green documents have been ready by
AUO Internal Green Team.
Box stacked
By air!one pallet