Documente Academic
Documente Profesional
Documente Cultură
Shell Gadus S2 OG Clear Oil is a high performance, semi-synthetic, non-bitumastic viscous lubricant specifically
developed to satisfy the demands of heavily loaded applications in open gears and slow rotating journal bearings.
Shell Gadus S2 OG Clear Oil is formulated to minimise brass bearing and steel roller wear and maintain normal
bearing temperatures under extreme operating conditions. Shell Gadus S2 OG Clear Oil incorporates synthetic
thickeners and high viscosity mineral oils blended with extreme pressure additives to give a modern high performance
sugar mill brass bearing lubricant.
Flash Point 0
C ASTM D93 230
Pour Point 0
C ASTM D97 6
These characteristics are typical of current production. Whilst future production will conform to Shell's specification, variations in
these characteristics may occur.
Health, Safety & Environment
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
http://www.epc.shell.com/
Additional Information
· Advice
Advice on applications not covered here may be obtained from your Shell representative.