Documente Academic
Documente Profesional
Documente Cultură
1. Lesson Objectives:
Explain Elastic moduli
Define Young’s modulus, shear modulus and bulk modulus
Discuss the procedure for determination of Young’s modulus of the material of the wire
2. a) Pre-requisites b) Pre-assessment:
Stress ,strain, Hooks law
1.Define modulus of elasticity
2.Explain Hooks law
b) Key Terms
Hooks Law, stress, strain, Young’s modulus b) RL
Shear modulus ,Bulk modulus
c) Value integration
To understand modulus of elasticity
EduBrisk website
Worksheets
7. Motivator / Opening activity:
8. Action Plan
No. Teacher Action Student Action
9. Differential Instructions:
b) Lesson Assessment:
1.Ratio of stress to strain is a
2.stress = k× strain; where constant k is called
3. Does stress strain curve obey Hooks law?
3. Does the stress strain curve varies from material to material
4. Stress strain curve is a relation between stress and strain for a given material under……..
11. Reinforcement / Homework / Project / Assignment:
1. If the strain is measured as 0.10, what is the total deformation of a 100 m length of material under
load?
2. What is the ratio of load or force divided by the cross-sectional area of the material being tested?
3. Sketch stress strain graph of typical steel and indicate different points.
4. The length of the wire is increased by 2% by applying a load of 2.5kg wt. What is the linear strain
produced in the wire