Documente Academic
Documente Profesional
Documente Cultură
HUAWEI GR3
Contents
2.1 CHECK WHETHER THE UPGRADE ENVIRONMENT MEET THE REQUIREMENTS ............................. 3
6 NOTE .............................................................................................................................................. 7
1 Version Requirements
For mobile phones software, you need to use MICRO SD card upgrade.
File Name
2 Upgrade preparation
dload\update.zip
3 Upgrade Instructions
There are two ways to upgrade: Mandatory upgrade and Normal upgrade.
Mandatory upgrade because no power, Therefore suitable for use under can not normal
boot (including not booting, Unable to enter the standby interface, etc.).
4 Upgrade operations
Step 3: Under the SD card root directory create a new folder, named dload, Copy the package
2016-10-31 Huawei confidential, no Page 3, Total7
spreading without permission
Software Upgrade Guideline Secret
which is named update.zip to the Catalog which name is “dload” of the SD card.If the package
Step 4:Check dload folder whether there is update.zip under the SD card root directory.
Step 5:Insert the SD card into the handset and power on(Built in card phone upgrade
does not require this step), enter the Settings -> Updater -> Menu -> Local update to
start the upgrade. If you need to backup data, please select the backup. Then,start to
upgrade.
Step 6:the upgrade process have a progress bar shows , After the progress bar complete,
Step3: Under the SD card root directory create a new folder, named dload, Copy the package
which is named update.zip to the Catalog which name is “dload” of the SD card.
Step 4:Check dload folder whether there is update.zip under the SD card root directory.
Step5: The phone in the shutdown state, insert the SD card, while pressing the volume on button +
volume down + the switch button, the phone automatically enter the upgrade mode, and then start
to upgrade. As graph:
Step 6: After the progress bar complete and does not move, the phone will automatically
restart when the progress is not complete does not shut down and perform other
operations).
Note: if you read the file or upgrade anomaly, will enter the Recovery Mode interface (or at the
same time press the volume up + switch button), press the volume down button to move the
cursor to the apply update from sdcard,then press power button, enter the select upgrade
package interface. Press the volume down button to select update.zip,press the power
button ,then start upgrade, after the upgrade is complete shows Install from sdcard
complete interface ,then select reboot system now,press the power button to restart the
5 Upgrade verification
After boot up enter Settings -> About phone -> Build number, or Updater -> Current
version, as reference:
Boot up normally,enter the standby interface,enter the number and be able to dial the
6 note
6.1 note 1
To ensure that the battery fully charged during the upgrade process, recommend during
the upgrade process the phone is connected to the charger or USB data cable supply
power
6.2 note 2
The upgrade process will erase user data, if there is an important content, it is