Documente Academic
Documente Profesional
Documente Cultură
IN-QA-SP-xx
Armstrong AS Quality Standard Owner:
Quality
AS Plant: Revision:
Viewing Board
India 00
1. Purpose
1.1 Purpose
The standard defines and regulates the hot dipped galvanised steel coil for the manufacture of
metal ceilings.
2. Scope:
2.1 Scope
This standard shall pertain to all Armstrong metal and wood ceiling production facilities and
Armstrong vendors who supplies metalwork and woodwork ceiling products to Armstrong.
3.1 Definitions
Viewing Board
4. General Information:
1) Light source should have emission at every wavelength within the visible range – 380 –
720 nm
2) Light source’s intensity should be stable.
3) Ambient temperature should be consistent. Change in ambient temperature will result in
change in intensity.
4) Light sources should be white balanced. White balancing will require a white reflectance
standard.
5) Geometry – alignment of source and product should be consistent over a period of time.
Product appearance will depend on properties - reflection, transmission, scattering,
absorption and emission.
Date: 12/08/14 1 of 6
Quality Procedure: Document Number:
IN-QA-SP-xx
Armstrong AS Quality Standard Owner:
Quality
AS Plant: Revision:
Viewing Board
India 00
Date: 12/08/14 2 of 6
Quality Procedure: Document Number:
IN-QA-SP-xx
Armstrong AS Quality Standard Owner:
Quality
AS Plant: Revision:
Viewing Board
India 00
Date: 12/08/14 3 of 6
Quality Procedure: Document Number:
IN-QA-SP-xx
Armstrong AS Quality Standard Owner:
Quality
AS Plant: Revision:
Viewing Board
India 00
Date: 12/08/14 4 of 6
Quality Procedure: Document Number:
IN-QA-SP-xx
Armstrong AS Quality Standard Owner:
Quality
AS Plant: Revision:
Viewing Board
India 00
3. Flood lights:
a. Turn on Flood lights (all other lights off)
b. Inspect from positions 1 to 2 in a half circle 6 to 7 looking for paint ridges,
picture framing, hold down marks, bumps rough surfaces, sander waves,
facial scratches, shot marks, indents and other facial defects.
c. Turn sample 90 degrees and repeat inspection.
6. Related Documents:
Date: 12/08/14 5 of 6
Quality Procedure: Document Number:
IN-QA-SP-xx
Armstrong AS Quality Standard Owner:
Quality
AS Plant: Revision:
Viewing Board
India 00
7. Document Approval
Prepare Navin K
Review
Approve
8. Document Control
x.0
x.0
Date: 12/08/14 6 of 6