Documente Academic
Documente Profesional
Documente Cultură
Materials testing
Product Information
Amsler HIT600F drop weight tester
CTA: 142582 142582
Abb.: Amsler HIT 600F drop weight tester Amsler HIT 600F drop weight tester, detail view
The universal drop weight tester for materials Advantages and features
testing Operator-friendly
Testing at low impact speeds of 2.2 m/s requires a
larger drop weight; if testing at 6.6 m/s is required, • Excellent test area accessibility
acceleration is necessary. This drop weight tester caters • No manual opening of safety devices in test area
for both situations, making it the perfect instrument to • Easy, manual feed of cooled specimens
satisfy the requirements of a wide range of automotive • Fast, safe, easy changeover between different config‐
industry specification standards. The feed and safety urations
concept provides optimum operator convenience and • Automatic series mode in testXpert III allows series
safety. With this drop weight tester pre-conditioned test testing with no operator intervention between indi‐
plates can be inserted and impacted in less than five vidual specimens
seconds, allowing many puncture tests to be performed • Automatic lubrication of striker
without the need to install a temperature chamber. The
Reliable test results
instrument can also be used for CAI, Charpy and Izod
tests. • High natural measuring frequency enables accurate
test results.
Range of application
• High data acquisition rate (4MHz) for all measurement
• Puncture tests on plastics to ISO 6603-2 and ASTM channels allows excellent resolution for measured
D3763 curves.
• Accelerated puncture tests on plastics in accordance • Large transient memory allows measured values for
with various automotive standards brittle and ductile materials to be stored at full resolu‐
• Puncture tests on plastic films to ISO 7765-2, ASTM tion.
D7192, ASTM D4272 • Full coverage of AITM 1.008 energy ranges.
• Pre-damaging fiber composites (CAI) as per ASTM
D7136, prEN 6038 and AITM 1.0010.
PI 939 1117
Zwick
Materials testing
Product Information
Amsler HIT600F drop weight tester
Accessories required
Tup holder and weights
The tup holder, including modular weight set up to 40 kg and associated dampers, is required for mulitaxial
puncture tests. The CIA testing equipment is required for pre-damaging fiber-composite plates. The two sets of
equipment can be interchanged by the customer, allowing both tests to be performed on one drop weight tester.
All data at ambient temperature. We reserve the right to make technical changes in the course of ongoing
development.
Zwick
Materials testing
Product Information
Amsler HIT600F drop weight tester
Clamping rings
Inside diameter Scope of delivery
Type [mm] Clamping faces [pair] Item No.
Clamping rings as per 40 smooth 1 1050556
ISO 7765-2
Clamping rings as per 20 grooved 1 1044076
ISO 6603-2
Clamping rings as per 40 grooved 1 1044077
ISO 6603-2
Clamping rings as per 76 grooved 1 1044078
ASTM D3763
Force sensors
• Easily interchangeable
• Replaceable tips
• Guarded axial terminal for measuring lead
Optional accessories
Acceleration unit
For higher speeds and energies
Product Information
Amsler HIT600F drop weight tester
Description Item number
- Maximum energy at 40 kg: 650 J
- Maximum impact velocity at 5 kg: 7,6 m/s
- Maximum energy at 5 kg: 145 J
Striker lubrication
Description Item number
Automatic lubrication of striker 1050788
All data at ambient temperature. We reserve the right to make technical changes in the course of ongoing
development.