Documente Academic
Documente Profesional
Documente Cultură
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Plasma TV
CHILE 800-SAMSUNG(726-7864) www.samsung.com/cl
COLOMBIA 01-8000112112 www.samsung.com.co
COSTA RICA 0-800-507-7267 www.samsung.com/latin
ECUADOR 1-800-10-7267 www.samsung.com/latin
user manual
EL SALVADOR 800-6225 www.samsung.com/latin
GUATEMALA 1-800-299-0013 www.samsung.com/latin
HONDURAS 800-7919267 -
JAMAICA 1-800-234-7267 www.samsung.com/latin
MEXICO 01-800-SAMSUNG(726-7864) www.samsung.com
NICARAGUA 00-1800-5077267 -
PANAMA 800-7267 www.samsung.com/latin
PUERTO RICO 1-800-682-3180 www.samsung.com/latin
REP. DOMINICA 1-800-751-2676 www.samsung.com/latin
TRINIDAD & TOBAGO 1-800-SAMSUNG(726-7864) www.samsung.com/latin
VENEZUELA 0-800-100-5303 www.samsung.com/latin
IMPORTADO POR:
AV. PRESIDENTE MASARIK #111 INT701
COL. CHAPULTEPEC MORALES C.P.11570
DELEGACION MIGUEL HIDALGO MEXICO. DISTRITO FEDERAL
Tel: 01-55-5747-5100 / 01-800-726-7864
BN68-01449A-00
Wide screen format PDP Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide
screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format,
or expanded to fill the screen if your model offers this feature and the images are constantly moving. Displaying stationary
graphics and images on screen, such as the dark side-bars on nonexpanded standard format television video and
programming, should be limited to no more than 5% of the total television viewing per week.
Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos,
web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary
images that exceed the above guidelines can cause uneven aging of PDP Displays that leave subtle, but permanent
burned-in ghost images in the PDP picture. To avoid this, vary the programming and images, and primarily display
full screen moving images, not stationary patterns or dark bars.
On PDP models that offer picture sizing features, use these controls to view different formats as a full screen picture.
Be careful in the selection and duration of television formats used for viewing. Uneven PDP aging as a result of format
selection and use, as well as burned-in images, are not covered by your Samsung limited warranty.
English -
Altitude
The PDP can only operate normally at heights under 6500ft.
Cell Defects
The PDP uses a panel consisting of 1,230,000(SD-level) to 3,150,000(HD-level) pixels which require sophisticated
technology to produce. However, there may be a few bright or dark pixels on the screen. These pixels will have no impact
on the performance of the product.
A still image displayed too long may cause permanent damage to the PDP Panel.
Watching the Plasma TV in 4:3 format for a long period of time may leave traces of borders
displayed on the left, right and center of the screen caused by the difference of light emission on
the screen.
Playing a DVD or a game console may cause similar effect to the screen.
Damages caused by the above effect are not covered by the Warranty.
Warranty
Warranty does not cover any damage caused by image retention.
Burn-in is not covered by the warranty.
Installation
Be sure to contact an authorized service centre, when installing your set in a location with heavy dust, high or low
temperatures, high humidity, chemical substance and where it operates continually such as the airport, the train station
etc. Failure to do so may cause a serious damage to your set.
English -
Sound Control
■ Changing the Sound Standard..................................... 33
■ Customizing the Sound.................................................33
■ Setting the TruSurround XT..........................................34
■ Choosing a Multi-Channel Sound (MTS) Track............ 35
■ Automatic Volume Control............................................35
■ Setting the TV Speakers On/Off .................................. 36
■ Listening to the Sound of the Sub (PIP) Picture........... 36
■ Connecting Headphones (Sold separately).................. 37
Symbols
Press One-Touch
➢Note
Button
English -
List of Features
• Adjustable picture settings that can be stored in the TV’s memory.
• Automatic timer to turn the TV on and off.
• A special sleep timer.
• Excellent Picture Quality
- DNIe technology provides life-like clear images.
• SRS TruSurround XT
- SRS TruSurround XT provides a virtual Dolby surround system.
• HDMI/DVI connection of your PC to this TV.
• 3D Funtion.
Accessories
Please make sure the following items are included with your TV. If any items are missing, contact your dealer.
The following parts are sold separately and are available at most electronics stores.
➢ If you do not use a good quality cable, some noise may appear on the screen.
S-VIDEO Cable HDMI Cable HDMI/DVI cable Component Cables Audio Cables
English -
English -
1 POWER IN 5 ANT IN
Connect the supplied power cord. Connects to an antenna or cable TV system.
2 AV IN 1(VIDEO / AUDIO R/L) 6 AUDIO OUT (R/L)
Connect RCA cable to an appropriate external A/V Audio outputs to external devices.
device such as VCR, DVD or Camcorder. 7 SERVICE
3 DVI IN (HDMI 2) (AUDIO-R/L) For service only.
Connect to the DVI audio output jack of an external device. 8 3D SYNC OUT
4 HDMI IN 1, 2 Connect to 3D IR Emitter.
Connect to the HDMI jack of a device with an HDMI 9 COMPONENT IN 1, 2
output. (HDMI IN 2 supports HDMI-DVI IN and Connects Component video/audio.
connection from a PC.)
- This input can also be used as a DVI connection with 0 PC IN[PC]/[AUDIO]
separate analog audio inputs. An optional HDMI/DVI Connect to the video and audio output jack on your PC.
cable will be necessary to make this connection.
- When using an optional HDMI/DVI adapter, the DVI
analog audio inputs on your TV allow you to receive left
and right audio from your DVI device.
HDMI IN 3 1 HDMI IN 3
Connect to the HDMI jack of a device with HDMI output.
2 S-VIDEO (AV IN 2)
S-Video input for external devices with an S-Video output.
3 AV IN 2(VIDEO / AUDIO R/L)
Video and Audio inputs for external devices.
4 HEADPHONE
You can connect a set of headphones if you wish to watch a television program without
disturbing other people in the room.
English -
1 POWER % SOURCE
Turns the TV on and off. Press to display all of the available
video sources.
2 TV
Selects the TV mode directly. ^ PRE-CH
Tunes to the previous channel.
3 NUMERIC BUTTONS
Press to directly select a channel. & CH
Press to change channels.
4 –
Use to select a channel over 100. * CC
For example, for channel 122, Controls the caption decoder.
press “-”, then “2”, then “2”.
( MENU
5 MUTE Displays the main on-screen menu.
Press to temporarily cut off the ) RETURN
sound. Returns to the previous menu.
6 VOL a EXIT
Press to increase or decrease the Press to exit the menu.
volume.
b MTS
7 CH LIST Press to choose stereo, mono or
Used to display Channel Lists on Separate Audio Program (SAP
the screen. broadcast).
8 TOOLS c DMA (Digital Media Adapter)
Use to quickly select frequently Use this when connecting a
used functions. Samsung DMA device through an
9 UP▲/DOWN▼/LEFT◄/ HDMI interface and switching to
DMA mode.
RIGHT►/ENTER For more information on the
Use to select on-screen menu operating procedures, refer to the
items and change menu values. user manual of the DMA.
0 INFO ➢ This button is available when
Press to display information on the “Anynet+(HDMI-CEC)” is “On”.
TV screen. (see page 53)
! COLOR BUTTONS d FAV.CH
Use these buttons in the Channel No Available.
list. e P.SIZE
@ SRS Press to change the screen size.
Selects SRS TruSurround XT
mode.
# E.MODE
Press to select the preset display
and sound modes for sports,
cinema and games.
$ Use these buttons in the DMA and
Anynet+ modes.
( : This remote can be used
to control recording on Samsung
recorders with the Anynet+ feature)
English -
Connections
Connecting VHF and UHF Antennas
If your antenna has a set of leads that look like this, see “Antennas with 300 Ω Flat
Twin Leads” below.
If your antenna has one lead that looks like this, see “Antennas with 75 Ω Round
Leads”.
If you have two antennas, see “Separate VHF and UHF Antennas”.
shops).
VHF
English -
2 Connect the other end of this cable to the ANT IN terminal on the back of the TV.
ANT IN
Cable Box
RF (A/B)
Switch
After you have made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B”
position to view scrambled channels. (When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s
output channel, which is usually channel 3 or 4.)
English - 10
What is HDMI?
• HDMI, or high-definition multimedia interface, is an interface that enables the
transmission of digital audio and video signals using a single cable without
compression.
• The difference between HDMI and DVI is that the HDMI device is smaller in size and
has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed.
➢ Each DVD Player or Cable Box / Satellite receiver (Set-Top Box) has a different
back panel configuration.
➢ When connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box),
match the color of the connection terminal to the cable.
Connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box) via DVI
This connection can only be made if there is a DVI Output jack on the external device.
➢ Each DVD Player or Cable Box / Satellite receiver (Set-Top Box) has a different
back panel configuration.
➢ When connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box),
match the color of the connection terminal to the cable.
➢ When using an HDMI / DVI cable connection, you must use the HDMI IN 2 jack.
English - 11
Connecting a Camcorder
The side panel jacks on your TV make it easy to connect a camcorder to your TV.
They allow you to view the camcorder tapes without using a VCR.
English - 12
Video Connection
These instructions assume that you have already connected your TV to an antenna or a cable TV system (according
to the instructions on pages ~10). Skip step 1 if you have not yet connected to an antenna or a cable system.
1 Unplug the cable or antenna
from the back of the TV.
2 Connect the cable or antenna
to the ANT IN terminal on the
back of the VCR.
Connect an Antenna Cable
between the ANT OUT TV Rear Panel TV Side Panel
terminal on the VCR and the
ANT IN terminal on the TV.
4 Connect a Video Cable VCR Rear Panel
between the VIDEO OUT
jack on the VCR and the AV
IN 1 or AV IN 2 [VIDEO] jack
on the TV.
5 Connect Audio Cables
between the AUDIO OUT 5 Audio Cable(Not supplied)
jacks on the VCR and the AV 2
IN 1 (or AV IN 2) [R-AUDIO-L] 4 Video Cable(Not supplied)
➢ If you have a “mono” (non-stereo) VCR, use a Y-connector (not supplied) to hook
up to the right and left audio input jacks of the TV. If your VCR is stereo, you must
connect two cables.
➢ Each VCR has a different back panel configuration.
➢ When connecting a VCR, match the color of the connection terminal to the cable.
S-Video Connection
Your Samsung TV can be connected to an S-Video jack on a VCR.
(This connection delivers a better picture as compared to a standard VCR.)
1 To begin, follow steps 1–3
TV Rear Panel TV Side Panel
in the previous section to
connect the antenna or cable
to your VCR and your TV.
2 Connect an S-Video Cable VCR Rear Panel
between the S-VIDEO OUT
jack on the VCR and the AV
IN 2 [S-VIDEO] jack on the
TV.
Connect Audio Cables
between the AUDIO OUT
1 Antenna cable(Not supplied)
jacks on the VCR and the AV
IN 2 [R-AUDIO-L] jacks on Audio Cable (Not supplied)
the TV.
2 S-Video Cable(Not supplied)
An S-Video may be included with your VCR. (If not, check your local electronics store.)
➢ Each VCR has a different back panel configuration.
➢ When connecting a VCR, match the color of the connection terminal to the cable.
English - 1
➢ Each Amplifier / DVD Home Theater has a different back panel configuration.
➢ When connecting an Amplifier / DVD Home Theater, match the color of the
connection terminal to the cable.
English - 14
English - 15
1 If the television is in standby mode, press the POWER button on the remote Plug & Play
control. The message Start Plug & Play. is displayed. Press the ENTER button.
Language menu is displayed. Start Plug & Play.
OK
Enter
Move Enter
OK
Enter Skip
Continued...
English - 16
Enter Skip
7 Press the ◄ or ► button to select Month, Day, Year, Hour, Minute or am/pm. Plug & Play
Set these by pressing the ▲ or ▼ button. Clock Set
➢ You can set the Month, Day, Year, Hour, and Minute directly by pressing Month Day
▼
Year Hour Minute am/pm
the numeric buttons on the remote control. -- -- ---- -- -- am
▼
8 Press the ENTER button to confirm your setting. Enjoy your watching.
The message Enjoy your watching. is displayed.
OK
When you have finished, press the ENTER button.
➢ Even if the ENTER button is not pressed, the message will automatically
disappear after several seconds.
English - 17
English - 18
The TV will display the channel, the type of sound, and the status of certain
Mono
Picture : Standard
picture and sound settings. Sound
MTS
: Custom
: Stereo
SRS TS XT : Off
12 : 00 am
Press the INFO button once more or wait approximately 10 seconds and it disappears
automatically.
English - 19
➢ STD, HRC and IRC identify various types of cable TV systems. Contact your
local cable company to identify the type of cable system that exists in your
particular area. At this point, the signal source has been selected. Proceed Move Enter Return
to "Storing Channels in Memory (Automatic Method)".
English - 20
You can also press the SOURCE button on the remote control to view an external
signal source.
2 Press the ▲ or ▼ button to select AV1, AV2, S-Video, Component1, TV Edit Name
Component2, PC, HDMI1, HDMI2, or HDMI3 input jack, then press the ENTER AV1 : - - - - ----
AV2 : - - - - VCR
button. S-Video : - - - - DVD
Component1 : - - -Cable
- STB
Component2 : - - Satellite
- -
3 Press the ▲ or ▼ button to select VCR, DVD, Cable STB, Satellite STB, PVR PC :----
STB
: −−−−PVR STB
STB, AV Receiver, Game, Camcorder, PC, TV, IPTV, Blu-Ray, HD DVD or HDMI1
HDMI2 : −−−−AV Receiver
DMA input source, then press the ENTER button. HDMI3 : −−−− Game
▼
English - 21
Anynet+ (HDMI-CEC)
2 Press the ▲ or ▼ button to select Picture Mode. Picture Mode ◄ Standard ►
Sound Mode : Custom
3 Press the ◄ or ► button to select the required option. Sleep Timer
SRS TS XT
:
:
Off
Off
Energy Saving : Off
4. Press the EXIT or TOOLS button to exit. MTS : Stereo
• When in PC mode, Tint, Sharpness and Color are not available. Move Adjust Return
• Each adjusted setting will be stored separately according to its input mode.
• Cell Light : Sets the pixel brightness; 10 being the highest setting.
• Contrast : Adjusts the contrast level of the picture.
• Brightness : Adjusts the brightness level of the picture.
• Sharpness : Adjusts the edge definition of the picture.
• Color : Adjusts color saturation of the picture.
• Tint : Adjusts the color tint of the picture by compensating the red and green
color.
English - 22
Activating Gamma
You can adjust the Primary Color (Red, Green, Blue) Intensity. (-3 ~ +3) TV Detailed Settings
Black Adjust : Off ►
8 Press the ▲ or ▼ button to select Gamma, then press the ENTER button. Dynamic Contrast : High ►
Gamma : 0 ►
Color Space : Native ►
9 Press the ◄ or ► button to decrease or increase the value. White Balance ►
Flesh Tone : 0 ►
Press the ENTER button. Edge Enhancement : On ►
Gamma 0
Continued... Adjust Return
English - 23
• Auto : Auto Color Space automatically adjusts to the most natural color tone TV Color Space
based on program sources.
Color Space : Off Auto
• Native : Native Color Space offers deep and rich color tone. Color : Native
Red Custom 50
• Custom : Adjusts the color range to suit your preference. (see “Customizing the Green 0
Color Space”) Blue 0
Reset
13 Press the ▲ or ▼ button to select Color, then press the ENTER button.
➢ Color is available when Color Space is set to Custom. TV Color Space
Color Space : Off Auto
Native
14 Press the ▲ or ▼ button to select Red, Green, Blue, Yellow, Cyan or Color
Red Custom
:
50
Magenta. Press the ENTER button. Green
Blue
0
0
Reset
15 Press the ▲ or ▼ button to select Red, Green or Blue to change it.
Press the ENTER button.
Move Enter Return
16 Press the ◄ or ► button to decrease or increase the value of a particular item.
Press the ENTER button.
TV Color Space
➢ In Color, you can adjust the RGB values for the selected color. Color Space
Color
: Custom
: Red
➢ To reset the adjusted RGB value, select Reset. Red
Green
Green 50
0
Blue
Blue 0
• Red : Adjusts the red saturation level of the selected color. Reset Yellow
• Green : Adjusts the green saturation level of the selected color. Cyan
Magenta
• Blue : Adjusts the blue saturation level of the selected color.
• Reset : Resets the color space to the default values.
Move Enter Return
You can adjust the color temperature for more natural picture colors. Black Adjust : Off
Dynamic Contrast : High
►
►
Gamma : 0 ►
17 Press the ▲ or ▼ button to select White Balance, then press the ENTER Color Space : Native
White Balance
►
►
button. Flesh Tone : 0
Edge Enhancement : On
►
►
18 Select the required option by pressing the ▲ or ▼ button, then press the
ENTER button. Move Enter Return
➢ Changing the adjustment value will refresh the adjusted screen. R-Offset
▼
25
Continued...
English - 24
20 Press the ▲ or ▼ button to select Flesh Tone, then press the ENTER button. TV Detailed Settings
Black Adjust : Off ►
Dynamic Contrast : High ►
21 Press the ◄ or ► button to decrease or increase the value. Gamma : 0
Color Space : Native
►
►
Press the ENTER button. White Balance ►
Flesh Tone : 0 ►
➢ Changing the adjustment value will refresh the adjusted screen. Edge Enhancement : On ►
Flesh Tone 0
Adjust Return
1 Follow the Activating Picture Options instructions numbers 1 and 2. TV Picture Options
Color Tone : Normal
Cool2
2 Press the ▲ or ▼ button to select Color Tone, then press the ENTER button. Size : 16:9 Cool1
Digital NR : Auto Normal
3 Press the ▲ or ▼ button to select Cool2, Cool1, Normal, Warm1 or Warm2. DNle
HDMI Black Level
: Off Warm1
: Normal
: Off Warm2
Press the ENTER button. Blue Only Mode
Screen Burn Protection
3D Effect
➢ Warm1 or Warm2 is only activated when the picture mode is Movie.
➢ Settings can be adjusted and stored for each external device you have con- Move Enter Return
nected to an input of the TV.
Continued...
English - 25
2 Press the ▲ or ▼ button to select Size, then press the ENTER button. TV Size
16:9
3 Press the ▲ or ▼ button to select the screen format you want. Wide Zoom
Zoom
Press the ENTER button. 4:3
Just Scan
Press the EXIT button to exit.
• 16:9 : Sets the picture to 16:9 wide mode.
• Wide Zoom : Magnify the size of the picture more than 4:3.
• Zoom : Magnifies the size of the picture on the screen. Adjust Enter Return
• 4:3 : Sets the picture to 4:3 normal mode.
•J ust Scan : Use the function to see the full image without any cutoff when HDMI TV Size
(720p/1080i), Component (1080i) signals are input. 16:9
Wide Zoom
Zoom
4:3
Just Scan
➢ Temporary image retention may occur when viewing a static image on the
set for more than two hours.
➢ After selecting Wide Zoom mode : Adjust Enter Return
Press the ► button to select ( ), then press the ENTER button.
Press the ▲ or ▼ button to move the picture up and down. TV Size
➢ Settings can be adjusted and stored for each external device you have
connected to an input of the TV.
Adjust Enter Return
Input Source Picture Size
TV, AV, S-Video, 16:9, Wide Zoom, Zoom, 4:3
Component (480i, 480p)
Component (1080i), 16:9, Wide Zoom, Zoom, 4:3,
HDMI (720p, 1080i) Just Scan
PC 16:9, 4:3
Alternately, you can press the P.SIZE button on the remote control repeatedly to change
the picture size.
Continued...
English - 26
English - 27
2 Press the ▲ or ▼ button to select DNIe, then press the ENTER button.
Move Enter Return
3 P
ress the ▲ or ▼ button to select On, Demo, or Off or then press the ENTER TV Picture Options
button. Color Tone : Normal
Size : 16:9
Digital NR : Auto
• Off : Switches off the DNIe mode. DNle : Off Off
• Demo: T he screen before applying DNIe appears on the right screen after HDMI Black Level
Blue Only Mode
: Normal
Demo
: Off On
applying DNIe appears on the left. Screen Burn Protection
3D Effect
• On : Switches on the DNIe mode.
Press the EXIT button to exit. Move Enter Return
Continued...
English - 28
➢ To remove after-images on the screen, use either the White or Scrolling function. Although both functions remove
after-images on the screen, Scrolling is more effective.
➢ The after-image removal function has to be executed for a long time (approximately 1 hour) to effectively remove after-
images on the screen. If the after-image is not removed after performing the function, repeat the function again.
➢ Press any key on the remote control to cancel this feature.
Continued...
English - 29
ENTER button.
3 Press the ENTER button to select Pixel Shift, then press the ENTER button. TV Pixel Shift
Pressing the ▲ or ▼ button will alternate between On and Off. Pixel Shift
Horizontal Dot
:
:2
Off
On
You will also see the items Horizontal Dot, Vertical Line and Time. Vertical Line :2
Time : 2 min.
• Pixel Shift : Using this function, you can minutely move pixels on the PDP in the
horizontal or vertical direction to prevent after-images on the screen.
4 Press the ▲ or ▼ button to select the item you wish to change, then press the TV Pixel Shift
ENTER button. Pixel Shift
Horizontal Dot
: On
: 0
Press the ▲ or ▼ button to change the value of the item, then press the ENTER Vertical Line
Time
:
: 2min 1
button. 2
3
4
• Optimum condition for pixel shift;
PC TV/AV1/AV2/S-Video/Component/HDMI
Move Enter Return
Horizontal Dot 1 2
Vertical Line 1 2
Time(min) 2 2 min.
Press the EXIT button to exit.
English - 30
Connections
D Glasses
(Not supplied)
TV Rear Panel
D IR Emitter
(Not supplied)
PC
2 .5mm Stereo mini-plug/2RCA Cable (Not supplied)
※ The appearance of the 3D glasses (including Emitter) may differ depending on the model of your glasses.
1 Connect a HDMI/DVI cable between the HDMI IN 2 jack on the TV and the PC output jack on your computer.
2 Connect a 3.5mm Stereo mini-plug/2RCA cable between the DVI IN (HDMI 2) [R-AUDIO-L] jack on the TV and the
Audio Out jack of the sound card on your computer.
Connect the Emitter to the 3D SYNC OUT port on the rear panel of the TV.
4 Turn the TV on and set the source of the TV to HDMI2.
➢ For more information on the 3D glasses (including the Emitter), refer to the user manual of your 3D glasses.
➢ Adjust the PC resolution: - PL42A450P1: 1024 x 768@60Hz
- PL50A450P1 : 1024 x 768@60Hz,1360 x 768@60Hz
➢ The 3D IR Emitter communicates with the 3D glasses.
Therefore, the 3D IR Emitter should be located near the 3D glasses.
➢ It is activated when the HDMI or DVI input signal is RGB, and DVI Sound is supported.
➢ When the power is turned on or off, the mode changes to the default (Off) and the Format is saved.
➢ The D Effect is turned on or off regardless of the Picture Mode.
➢ When D Effect is on, only the Cell Light, Contrast, Brightness, D Effect, and Reset picture menus are activated.
➢ To use the 3D Effect function, a graphics card supporting 3D or 3D software is required.
➢ The 3D glasses and the Emitter must be manufacturer by the same company.
➢ If you play a game or watch TV while wearing the 3D glasses for long periods of time, you may experience eyestrain or
a headache.
➢ 3D glasses (including the Emitter) not manufactured by Samsung may not be supported.
➢ If you find the screen flickering while the 3D function is used, change the environmental lighting darker or turn off the
fluorescent lamp to watch the screen for its best condition.
Changing the Mode
Provides the function to turn on the 3D Effect. You can choose between Mode1 TV Picture
and Mode2. To achieve the 3D effect, the 3D glasses shutter back and forth Mode
Cell Light
: Standard ►
7
from the left to right and vice versa (left/right sync). Contrast
Brightness
90
45
Sharpness 50
Color 50
1 Connect the TV, PC and 3D IR Emitter as shown in the figure. Tint G 50 R 50
Detailed Settings ►
Picture Options ►
2 Press the SOURCE button to select HDMI2. Reset : OK ►
Move Enter Return
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Picture, then press the ENTER button.
Continued...
English - 1
TV 3D Effect
Off
Mode :
Changing the Format Format : Mode 1
Mode 2
Select the optimal input format to match your graphic cards or 3D Software.
English - 32
Easy Setting
1 Press the TOOLS button on the remote control. TOOLS
Anynet+ (HDMI-CEC)
2 Press the ▲ or ▼ button to select Sound Mode. Picture Mode : Standard
Sound Mode ◄ Custom ►
Sleep Timer : Off
3 Press the ◄ or ► button to select the required option. SRS TS XT : Off
Energy Saving : Off
MTS : Stereo
4. Press the EXIT or TOOLS button to exit.
Move Adjust Exit
• L/R Sound Balance Adjustment : To adjust the sound balance of the L/R Balance 100Hz 300Hz 1kHz 3kHz 10kHz
speakers.
• Bandwidth Adjustment (100Hz, 300Hz, 1kHz, 3kHz, 10kHz) : Move Adjust Return
To adjust the level of different bandwidth frequencies.
➢ If you make any changes to the equalizer settings, the sound mode is
automatically switched to the Custom mode.
English - 33
TruSurround XT, SRS and Symbol are trademarks of SRS Labs, Inc.
TruSurround XT technology is incorporated under license from SRS Labs, Inc.
Easy Setting
1 Press the TOOLS button on the remote control. TOOLS
English - 34
Multi-Track Sound
TV Sound
3 Press the ▲ or ▼ button to select a setting you want, then press the ENTER
button. Mode
Equalizer
: Custom
SRS TS XT : Off
Mono
Press the EXIT button to exit. MTS
Auto Volume
: SPA
: Off
Stereo
TV Speaker : Off SAP
Sound Select : Main
• Mono : Choose for channels that are broadcasting in mono or if you are having
difficulty receiving a stereo signal.
• Stereo : Choose for channels that are broadcasting in stereo. Move Enter Return
•S AP : Choose to listen to the Separate Audio Program, which is usually a foreign
language translation.
Press the MTS buttons on the remote control to select Mono, Stereo, or SAP.
3 Press the ▲ or ▼ button to select Off or On, then press the ENTER button. TV Sound
Mode : Custom
Press the EXIT button to exit. Equalizer
SRS TS XT : Off
MTS : Stereo
Auto Volume : Off Off
TV Speaker : Off On
Sound Select : Main
English - 35
3 Press the ▲ or ▼ button to select Off or On, then press the ENTER button. TV Sound
Press the EXIT button to exit. Mode : Custom
Equalizer
➢ • When TV Speaker is set to Off, you can operate only MTS (in TV mode) SRS TS XT
MTS
: Off
: Stereo
and Sound Select (in PIP mode) in Sound menu. Auto Volume : Off
TV Speaker : Off Off
• The VOL , VOL and MUTE buttons do not operate when the TV Sound Select : Main On
TV AV, S-Video Component, PC, HDMI TV AV, S-Video Component, PC, HDMI
TV Speaker On Speaker Output Speaker Output Speaker Output Sound Output Sound Output Sound Output
TV Speaker Off Mute Mute Mute Sound Output Sound Output Sound Output
TV Sound
3 Press the ▲ or ▼ button to select Main or Sub, then press the ENTER button.
Mode : Custom
Equalizer
SRS TS XT : Off
Press the EXIT button to exit. MTS
Auto Volume
: Stereo
: Off
TV Speaker : Off Main
Sound Select : Main
Sub
• Main : Used to listen to the sound of the main picture.
• Sub : Used to listen to the sound of the sub picture.
Move Enter Return
➢ • You can select this option when PIP is set to On. (See page 50)
English - 36
➢ When you insert the headphone’s plug into the headphone jack, you can MTS TV Side Panel
(in TV mode), Auto Volume and Sound Select (in PIP mode) in Sound menu.
English - 37
Channel List
4 Press the ▲/▼/◄/► buttons to move to the ( ) field. Air 3
1/7
Press the ENTER button to add the desired channel. Ch.
Air 2 ▲
➢ If you press the ENTER button again, the ( ) symbol next to the channel Air 3
disappears and the channel is not added. Air 4
Air 5
Air 6
Air 7
5 Repeat steps 5 for each channel to be selected or canceled. Air 8
Air 9
Air 10
Press the EXIT button to exit. Air 11 ▼
Add Lock
➢ ( ) is active when Child Lock is selected to On. Move Enter
Page Return
Press the CH LIST button on the remote control to display a list of channels.
English - 38
3 Press the ▲ or ▼ button to select Child Lock, then press the ENTER button. TV Channel Manager
Channel List
4 Press the ▲ or ▼ button to select On. Press the ENTER button. Child Lock : Off
On
5 Press the ▲ or ▼ button to select Channel List, then press the ENTER button.
6 Press the ▲/▼/◄/► buttons to move to the ( ) field. Press the ENTER button Air 3
Channel List
Press the CH LIST button on the remote control to display a list of channels.
English - 39
Fine Tune
Air 4
Reset
Fine Tune
Air 4 *
4 To store the fine tuning setting in the TV’s memory, press the ENTER button. +10
To reset the fine tuning setting, press the ▼ button to select Reset, then press Reset
the ENTER button.
Adjust Save Return
Press the EXIT button to exit.
Fine Tune
➢ “ * ” will appear next to the number of fine-tuned channels. Air 4
Reset
2. Press the ▲ or ▼ button to select Color System, then press the ENTER button. TV Channel
Air/Cable : Air
3. Press the ▲ or ▼ button to select the desired color standard (Auto, PAL-M, Auto Program
Channel Manager
PAL-N, or NTSC), then press the ENTER button. Fine Tune
Color System : Auto Auto
English - 40
Display Modes
If the signal from the system equals the standard signal mode, the screen is adjusted automatically. If the signal
from the system doesn’t equal the standard signal mode, adjust the mode by referring to your videocard user
guide; otherwise there may be no video. For the display modes listed below, the screen image has been optimized
during manufacture.
D-Sub Input
Pixel Clock
Mode Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Sync Polarity (H/V) PL42A450P1 PL50A450P1
Frequency (MHz)
640 x 350 31.469 70.086 25.175 +/- ✔ ✔
IBM
720 x 400 31.469 70.087 28.322 -/+ ✔ ✔
640 x 480 31.469 59.940 25.175 -/- ✔ ✔
640 x 480 37.861 72.809 31.500 -/- ✔ ✔
640 x 480 37.500 75.000 31.500 -/- ✔ ✔
800 x 600 37.879 60.317 40.000 +/+ ✔ ✔
800 x 600 48.077 72.188 50.000 +/+ ✔ ✔
VESA
800 x 600 46.875 75.000 49.500 +/+ ✔ ✔
1024 x 768 48.363 60.004 65.000 -/- ✔ ✔
1024 x 768 56.476 70.069 75.000 -/- ✔ ✔
1024 x 768 60.023 75.029 78.750 +/+ ✔ ✔
1360 x 768 47.712 60.015 85.500 +/+ ✔
HDMI/DVI Input
Pixel Clock
Mode Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Sync Polarity (H/V) PL42A450P1 PL50A450P1
Frequency (MHz)
640 x 480 31.469 59.940 25.175 -/- ✔ ✔
800 x 600 37.879 60.317 40.000 +/+ ✔ ✔
VESA
1024 x 768 48.363 60.004 65.000 -/- ✔ ✔
1360 x 768 47.712 60.015 85.500 +/+ ✔
• When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.
• The interlace mode is not supported.
• The TV operates abnormally if a non-standard video format is selected.
• The table above conforms to IBM/VESA regulations and is based on using the Analog Input.
• “ ✔ ” mark means that this mode is supported.
English - 41
button. The message Auto Adjustment in Progress. Please wait. appears on Move Enter Return
the screen and the picture adjustments are automatically activated.
Auto Adjustment in Progress
Press the EXIT button to exit. Please wait.
TOOLS
Anynet+ (HDMI-CEC)
Easy Setting Picture Mode
Sound Mode
:
:
Standard
Custom
Sleep Timer : Off
1 Press the TOOLS button on the remote control. SRS TS XT
Energy Saving
:
:
Off
Off
PIP
2 Press the ▲ or ▼ button to select Auto Adjustment, then press the ENTER Auto Adjustment
TV Screen
Coarse 50
2 Press the ▲ or ▼ button to select Coarse or Fine, then press the ENTER Fine 63
►
button. Position
Image Reset ►
Press the ◄ or ► button to adjust the screen quality, then press the ENTER
button.
Press the EXIT button to exit.
Move Enter Return
➢ Vertical stripes may appear or the picture may be blurry.
Coarse 50
Continued...
English - 42
Image Reset ►
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Picture, then press the ENTER button.
Press the ▲ or ▼ button to select Screen, then press the ENTER button.
Move Enter Return
2 Press the ▲ or ▼ button to select Position, then press the ENTER button. TV Position
2 Press the ▲ or ▼ button to select Image Reset, then press the ENTER button.
The message Image Reset is completed. appears on the screen. Image Reset is completed.
English - 43
3 Press the ◄ or ► button to move to Month, Day, Year, Hour, Minute, or am/ TV Clock Set
pm. Set the date and time you want by pressing the ▲ or ▼ button, then press Month Day Year
the ENTER button. 01 01 2008
➢ The current time will appear every time you press the INFO button. 12 00 am
➢ You can set the Month, Day, Year, Hour, and Minute directly by pressing Move Adjust Return
the number buttons on the remote control.
Continued...
English - 44
• Channel : When the On Time is activate, you can turn on a specific channel.
➢ You can set the hour, and minute directly by pressing the number buttons on
the remote control.
➢ Auto Power Off
When you set the timer On, the television will eventually turn off, if no
controls are operated for 3 hours after the TV was turned on by the timer.
This function is only available in timer On mode and prevents overheating,
which may occur if a TV is on for too long time.
English - 45
2 Press the ▲ or ▼ button to select the appropriate language: English, Français, TV Setup
Español, or Português, then press the ENTER button. Plug & Play
Language : English
English
Time
Press the EXIT button to exit. Caption
Light Effect
Français
: In Watching
Español TV
Wall-mount Adjustment Português
Melody : Off
Entertainment : Off
Energy Saving : Off
AV Color System : Auto
PIP
Move Enter Return
2 Press the ▲ or ▼ button to select Light Effect, then press the ENTER button. TV Setup
Press the ▲ or ▼ button to select Off, In Standby, Watching TV, or Always, Plug & Play
Language : English
then press the ENTER button. Time
Caption
Light Effect Off TV
: In Watching
Press the EXIT button to exit. Wall-mount Adjustment In Standby
Melody : Off
Entertainment Watching TV
: Off
Energy Saving : Off Always
AV Color System : Auto
• Off : The LED is always off. PIP
• In Standby : The LED lights while in Standby mode and it turns off when your TV Move Enter Return
is turned on.
• Watching TV : The LED lights when watching TV and it turns off when your TV is
turned off.
• Always : The LED is always lit.
English - 46
Press the ▲ or ▼ button to select Off, Low, Medium, or High, then press the Plug & Play
Language : English
ENTER button. Time
Caption
Light Effect : Watching TV
Wall-mount Adjustment
Melody : Off Off
• Off : Turns off the melody function. Entertainment
Energy Saving
: Off Low
: Off
• Low : Sets the melody volume to low. AV Color System : Auto Medium
High
PIP
• Medium : Sets the melody volume to medium. Move Enter Return
• High : Sets the melody volume to high.
English - 47
2 Press the ▲ or ▼ button to select Entertainment, then press the ENTER button. TV Setup
Press the ▲ or ▼ button to select Off, Sports, Cinema or Game, then press Plug & Play
Language : English
the ENTER button. Time
Caption Off
Light Effect : In Watching
Sports TV
Wall-mount Adjustment Cinema
• Off : Switches the Entertainment function off. Melody
Entertainment
: Off
: Off Game
• Sports : Provides the optimal picture and sound quality for sports. Energy Saving
AV Color System
: Off
: Auto
• Cinema : Provides the optimal picture and sound quality for movie watching PIP
You can experience a richer picture and enhanced sound. Move Enter Return
• Game : Provides the optimal picture and sound quality for games. This mode accelerates
the playing speed when using an external game console connected to the TV.
You can press the E.MODE button on the remote control repeatedly to change the
Entertainment setting.
2 Press the ▲ or ▼ button to select Energy Saving, then press the ENTER TV Setup
button. Plug & Play
Language : English
Press the ▲ or ▼ button to select Off, Low, Medium, or High, then press the Time
Light Effect : In Watching
Off TV
ENTER button. Wall-mount Adjustment Low
Melody : Off
Entertainment : Off Medium
Press the EXIT button to exit. Energy Saving : Off High
AV Color System : Auto
PIP
• Off : Switches off the Energy Saving mode. Move Enter Return
• Low : Operates in standard mode.
• Medium : Enters medium power saving mode.
• High : Enters maximum power saving mode.
English - 48
TV Caption
2 Press the ENTER button to select Caption.
Caption : Off Off
Press the ▲ or ▼ button to select On, then press the ENTER button. Mode : Caption
Channel : 1 On
Field :1
TV Caption
3 Press the ▲ or ▼ button to select Mode, then press the ENTER button.
Caption : On
Press the ▲ or ▼ button to select Caption or Text, then press the ENTER Mode : Caption
Caption
Channel :1
button. Field : 1 Text
➢ Different channels and fields display different information: Field 2 carries additional
information that supplements the information in Field 1. (For example, Channel 1 may
Move Enter Return
have subtitles in English, while Channel 2 has subtitles in Spanish.)
➢ The availability of captions depends on the program being broadcast.
➢ Caption is no available in Component, PC and HDMI modes.
English - 49
PAL-N, or NTSC), then press the ENTER button. Move Enter Return
➢ If you turn the TV off while watching in PIP mode and turn it on again, the PIP PIP
Source
: On
: TV
Off
Channel : Air 43
➢ You can view Analog TV broadcasts on the PIP screen (sub-picture) when the
main picture is from an external device connected to HDMI1, HDMI2, HDMI3,
Component1, 2 or PC. Move Enter Return
➢ PIP Settings
Main Picture Sub Picture
Component1, 2
HDMI1, HDMI2, HDMI3 TV, AV1, AV2
PC
➢ The sub picture can serve different source selections based on what the main Move Enter Return
picture is set to.
English - 50
TV PIP
4. Press the ▲ or ▼ button to select Size, then press the ENTER button.
PIP : On
Press the ▲ or ▼ button to select the required option, then press the ENTER Source : TV
button. Size
Position
:
:
Channel : Air 43
➢ You may notice that the picture in the PIP window becomes slightly unnatural
when you use the main screen to view a game or karaoke.
Move Enter Return
➢ Size is only available if main picture is in HDMI mode.
• You may notice that the picture in the PIP window becomes slightly unnatural
when you use the main screen to view a game or karaoke.
• You can adjust picture position only by using the size menu.
Easy Setting
1 Press the TOOLS button on the remote control. TOOLS
2 Press the ▲ or ▼ button to select PIP, then press the ENTER button. Anynet+ (HDMI-CEC)
Picture Mode : Standard
Sound Mode : Custom
3 Press the ▲ or ▼ button to select a particular item. Sleep Timer
SRS TS XT
:
:
Off
Off
Energy Saving : Off
4 Press the ◄ or ► button to select the required option. PIP
PIP
PIP : On
Source : TV
Size :
Position :
Channel ◄ Air 7 ►
English - 51
What is Anynet+?
Anynet+ is an AV network system that enables you to control all connected Samsung AV devices with your
Samsung TV’s remote.
To directly connect to TV
Connect the [HDMI IN 1], [HDMI
TV Anynet+ Device 1 Anynet+ Device 2 Anynet+ Device IN 2] or [HDMI IN 3] jack on
the TV and the HDMI OUT jack
of the corresponding Anynet+
device using the HDMI cable.
HDMI Cable
HDMI Cable
HDMI Cable
HDMI Cable
HDMI Cable
English - 52
2 Press the ▲ or ▼ button to select Anynet+ (HDMI-CEC), then press the Menu on Device ►
Device Operation ►
ENTER button. Receiver :Off ►
3 Press the ▲ or ▼ button to select Setup, then press the ENTER button. Setup
Move
►
Enter
Return
4 Press the ENTER button to select Anynet+ (HDMI-CEC).
Setup
5 Press the ▲ or ▼ button to select On, then press the ENTER button. Anynet+ (HDMI-CEC) : OffOff
➢ When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related Move Enter Return
operations are deactivated.
Setting an Anynet+ Device to turn Off Automatically when the TV is Turned Off Setup
Anynet+ (HDMI-CEC) : On
4 Press the ▲ or ▼ button to select Auto Turn Off, then press the ENTER button.
Auto Turn Off : Off
No
5 Press the ▲ or ▼ button to select Yes, then press the ENTER button. Searching Connections
Yes
➢ The Auto turn off function is enabled. Move Enter Return
➢ If you select No, the Auto turn off function is canceled.
Press the EXIT button to exit.
➢ The Select Device setting of the TV remote control is to be set to TV to use the Anynet+ function.
➢ If you set Auto Turn Off to Yes, connected external devices are also turned off when the TV is turned off.
However, if the device is recording, it may not be turned off.
Searching Connections ►
➢ Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching
operation.
➢ The time required to scan for devices is determined by the number of connected devices.
➢ When the device scan is complete, the number of found devices is not displayed.
➢ Although the TV automatically scans devices when it is turned on using the POWER button, devices connected when
the TV is already on are not displayed in the device list. In this case, select the Searching Connections menu to search
devices.
➢ If you have selected external AV device by pressing the SOURCE button, you cannot use the Anynet+ function. Make
sure to switch to an Anynet+ device by using the TOOLS button.
English - 53
➢ The Anynet+ function only works when the remote control is set to TV.
➢ The REC button works only while in the recordable state.
➢ You cannot control Anynet+ devices using the buttons on the side of the TV. You can control Anynet+ devices only
using the TV remote control.
➢ The TV remote control may not work under certain conditions. In this case, re-select the Anynet+ device.
➢ The Anynet+ functions don’t operate for the products from other manufacturers.
➢ The Anynet+ functions do not work with other manufacturers’ products.
➢ The , operations may differ depending on the device.
Recording
You can make a recording of a TV program using a Samsung recorder.
Press the REC button.
Recording begins. (Only when the Anynet+ enabled recording device is connected.)
➢ You can record the source streams by selecting Record after pressing the TOOLS button.
➢ The current TV program is recorded in the Watching TV status. If you are watching
video from another device, the video from the device is recorded.
➢ Before recording, check whether the antenna jack is properly connected to the recording device.
For the antenna connection to the recording device’s user manual.
Continued...
English - 54
2 Press the ▲ or ▼ button to select Anynet+ (HDMI-CEC), then press the ENTER button. Select Device ►
Record ►
3 Press the ▲ or ▼ button to select Receiver, then press the ENTER button. Menu on Device ►
Device Operation ►
4 Press the ◄ or ► button to select to On, then press the ENTER button. Receiver :On ►
➢ If your receiver supports audio only, it may not appear in the device list.
➢ When listening through the receiver, there are restrictions for using the audio-related (MTS, Preferred language)
menus.
➢ If there is a power interruption to the TV when the Receiver is set to On (by disconnecting the power cord or a power
failure), the TV Speaker may be set to Off when you turn the TV on again.
English - 55
Troubleshooting
If the TV seems to have a problem, first try this list of possible problems and solutions.
If none of these troubleshooting tips apply, call your nearest Samsung service center.
English - 56
Continued...
English - 57
►
➢ You can move the wall mount to one of the 3 pre-set positions by pressing the
►
Red (Position 1), Green (Position 2) or Yellow (Position 3) buttons.
►
➢ If you adjust the positon after moving to a pre-set position, the position display
►
will disappear.
Position 1 2 3
➢ For installation, refer to the Installation Manual provided with the wall mount. Adjust Save INFO Center
➢ For product installation and the installation and moving of the wall mount, make
sure to consult a specialized installation company.
➢ This installation manual is to be used when attaching the wall mount to a wall.
When attaching to other building materials, please contact your nearest dealer.
➢ The auto wall mount will not work when Anynet+ is operating.
➢ 42 inches model is not compatible with the older wall mount model (WMN5090A).
English - 58
23 ~ 26 200 * 100 M4
32 ~ 40 200 * 200 M6
400 * 400
46 ~ 52
600 * 400
LCD-TV 4
700 * 400
57
(No VESA) M8
57 ~ 70 800 * 400
80 ~ 1400 * 800
400 * 400
42 ~ 58 4
600 * 400
676 * 407
63 6
PDP-TV (No VESA) M8
63 ~ 70 800 * 400 4
80 ~ 1400 * 800 4
➢ We provided the standard dimensions for wall mount kits as shown in the table above.
➢ When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.
➢ Do not use screws longer than the standard dimension, as they may cause damage to the inside of the TV set.
➢ For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ
depending on their specifications.
➢ Do not use screws that do not comply with the VESA standard screw specifications.
Do not use fasten the screws too strongly, this may damage the product or cause the product to fall, leading to
personal injury. Samsung is not liable for these kinds of accidents.
➢ Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or
the consumer fails to follow the product installation instructions.
➢ Our 57” and 63” models do not comply with VESA Specifications. Therefore, you should use our dedicated wall mount
kit for this model.
➢ Do not exceed 15 degrees tilt when mounting this TV.
Do not install your Wall Mount Kit while your TV is turned on.
It may result in personal injury due to electric shock.
English - 59
Warning
Firmly secure the stand to the TV
before moving it, as the stand may
fall and could cause serious injury.
Specifications
Dimension (W x H x D)
Body 41.5 X 26.3 X 3.7 inches 48.4 X 29.8 X 3.8 inches
(1055.0 X 667.4 X 93.2 mm) (1230.2 X 755.7 X 95.0 mm)
With stand 41.5 X 28.5 X 12.4 inches 48.4 X 32.0 X 12.4 inches
(1055.0 X 724.9 X 315.9 mm) (1230.2 X 812.7 X 315.9 mm)
Weight
Body 59.3 lbs (26.9 Kg) 75.4 lbs (34.2 Kg)
With stand 67.2 lbs (30.5 Kg) 81.6 lbs (37.0 Kg)
Environmental Considerations
Operating Temperature 50 °F to 104 °F (10 °C to 40 °C)
Operating Humidity 10% to 80%, non-condensing
Storage Temperature -4 °F to 113 °F (-20 °C to 45 °C)
Storage Humidity 5% to 95%, non-condensing
-20° ~ 20°
English - 60
Las pantallas PDP con formato de pantalla panorámica (16:9, la relación de aspecto ancho:alto de la pantalla) están
diseñadas principalmente para visualizar vídeos de movimiento de formato panorámico. Las imágenes deben estar
principalmente en el formato panorámico de relación 16:9, o ampliadas para llenar la pantalla si el modelo tiene esta opción,
y las imágenes están en movimiento constante. La visualización de imágenes y gráficos estáticos en la pantalla, como las
barras oscuras laterales en programación y vídeos de televisión en formato estándar no ampliados, debe limitarse a no más
del 5% del tiempo total de visualización del televisor por semana.
Además, la visualización de otras imágenes estáticas y texto, como los informes de bolsa, pantallas de videojuegos, logotipos
de emisoras, sitios Web o gráficos y dibujos de ordenador, deberá limitarse en todos los televisores como ya se ha descrito.
La visualización de imágenes estáticas que supere los límites de las instrucciones anteriores puede producir un
envejecimiento desigual de las pantallas PDP, lo que provocará una reproducción superpuesta sutil pero permanente
de la imagen de la PDP. Para evitarlo, varíe la programación y las imágenes y, sobre todo, visualice imágenes en
movimiento a toda pantalla, no gráficos estáticos ni barras oscuras.
En modelos de PDP que ofrezcan opciones para el tamaño de la imagen, utilice estos controles para ver los distintos formatos
como imagen a toda pantalla.
Tenga cuidado en la selección y duración de los formatos de televisión utilizados para la visualización. La garantía limitada de
Samsung no cubre el envejecimiento desigual de la PDP como resultado de la selección y uso de formatos, así como otras
imágenes retenidas.
Español -
Altitud
La PDP sólo puede funcionar normalmente hasta altitudes de 2.000 metros.
Defecto de celda
La PDP utiliza un panel compuesto de 1,230,000 (nivel SD) a 3,150,000 (nivel HD) píxeles que requieren una sofisticada
tecnología para su producción. No obstante, puede que existan unos cuantos píxeles brillantes u oscuros en la pantalla.
Estos píxeles no influirán en el rendimiento del aparato.
La imagen fija visualizada durante demasiado tiempo puede causar daños permanentes en el panel de la PDP.
Ver el TV de plasma en formato 4:3 durante un tiempo prolongado puede dejar rastros de bordes
en la izquierda, derecha o centro de la pantalla causados por la diferencia de emisión de luz en
la pantalla.
Reproducir un DVD o una videoconsola puede causar un efecto similar en la pantalla.
La garantía no cubre estos daños.
Garantía
La garantía no cubre ningún daño causado por la retención de imágenes.
La garantía no cubre el desgaste de la pantalla.
Instalación
Póngase en contacto con un centro de servicio técnico autorizado cuando instale el equipo en un lugar expuesto a gran
cantidad de polvo, temperaturas extremas, alto nivel de humedad y productos químicos, y en lugares donde se vaya a
utilizar continuamente, como aeropuertos, estaciones, etc.
Español -
Símbolos
Pulse Botón de una
➢Nota
pulsación
Español -
Características
• Valores ajustables de la imagen que se pueden almacenar en la memoria del televisor.
• Temporizador automático para encender o apagar el televisor.
• Temporizador de desconexión especial.
• Calidad excelente de la imagen.
- La tecnología DNIe proporciona imágenes completamente reales.
• SRS TruSurround XT
- SRS TruSurround XT proporciona un sistema surround Dolby virtual.
• Conexión HDMI/DVI del ordenador a este televisor.
• Función 3D.
Accesorios
Compruebe que los artículos siguientes vengan incluidos con su televisor. Si falta alguno, póngase en contacto
con su distribuidor.
Las piezas siguientes se venden por separado y están disponibles en la mayoría de tiendas de electrónica.
➢ Si no se utiliza un cable de buena calidad, pueden producirse interferencias en la pantalla.
Cable S-VIDEO Cable HDMI Cable HDMI/DVI Cables de componentes Cables de audio
Español -
Español -
1 HDMI IN 3
Conexión para la terminal HDMI de un dispositivo que tenga salida HDMI.
HDMI IN 3
2 S-VIDEO (AV IN 2)
Entrada de S-Vídeo para dispositivos externos con salida de S-Vídeo.
3 AV IN 2(VIDEO / AUDIO R/L)
Entradas de audio y vídeo para dispositivos externos.
4 AURICULARES
Puede conectar unos auriculares si desea ver un programa de televisión sin molestar a otras
personas que se encuentren en la misma sala.
Español -
Español -
Conexiones
Conexión de las antenas de VHF y UHF
Si su antena tiene un juego de cables con este aspecto, consulte “Antenas con
cables planos dobles de 300 Ω” a continuación.
Si la antena tiene un cable con este aspecto, consulte “Antenas con cables
coaxiales de 75 ohmios”.
Si tiene dos antenas, consulte “Antenas VHF y UHF separadas”.
Español -
2 Enchufe el otro extremo del cable en la terminal ANT IN de la parte posterior del TV.
ANT IN
Decodificador de cable
Una vez realizada esta conexión, ajuste el conmutador A/B a la posición “A” para la visualización normal. Ajuste el
conmutador A/B en la posición “B” para ver los canales codificados. (Cuando ajuste el conmutador A/B en la posición “B”,
necesitará sintonizar el TV con el canal de salida del receptor de cable, que normalmente es el canal 3 o 4.)
Español - 10
¿Qué es HDMI?
• HDMI, o interfaz multimedia de alta definición, es una interfaz que permite la transmisión
de señales digitales de audio y de vídeo mediante un solo cable sin compresión.
• La diferencia entre los dispositivos HDMI y DVI es que el HDMI es más pequeño y
tiene instalada la función de codificación HDCP (protección alta de la copia digital
del ancho de banda).
➢ Cuando conecte un reproductor de DVD o receptor de televisión por cable/satélite
(decodificador), debe hacer coincidir los colores de la terminal de conexión y del
cable.
(decodificador).
➢ Cada reproductor de DVD o receptor de televisión por cable/satélite
(decodificador) tiene una configuración diferente del panel posterior.
➢ Cuando conecte un reproductor de DVD o un receptor de televisión por cable/
satélite (decodificador), debe hacer coincidir los colores de la terminal de conexión
y del cable.
➢ Cuando se usa una conexión de cable HDMI/DVI se debe utilizar la terminal HDMI
IN 2.
Español - 11
Español - 1
Conexión de S-Vídeo
Este televisor Samsung se puede conectar a una terminal S-Video de un aparato de vídeo.
(Esta conexión ofrece mejor calidad de imagen que un vídeo normal.)
Con el aparato de vídeo se puede incluir una conexión S-Vídeo. (En caso contrario,
consulte en la tienda de electrónica.)
➢ Cada aparato de vídeo tiene una configuración diferente del panel posterior.
➢ Cuando conecte un aparato de vídeo, debe hacer coincidir los colores de la
terminal de conexión y del cable.
Español - 1
➢ Cada amplificador y sistema de DVD para Sistema de cine en casa tiene una
configuración diferente del panel posterior.
➢ Cuando conecte un amplificador o un sistema de DVD para Sistema de cine en
casa, debe hacer coincidir los colores de la terminal de conexión y del cable.
Español - 1
Español - 15
1 Si el televisor está en modo de espera, pulse el botón POWER del mando Plug & Play
a distancia. Aparece el mensaje Start Plug & Play. Pulse el botón ENTER.
Start Plug & Play
Aparece el menú Idioma.
Aceptar
Ingresar
2 Seleccione el idioma correspondiente pulsando los botones ▲ o ▼. Pulse Plug & Play
el botón ENTER. Aparece automáticamente el mensaje Seleccione ‘Uso Idioma :
English
domiciliario’ para instalar este TV en su casa. Français
Español
Português
Ingresar Omitir
5 Seleccione el origen de señal correcto entre Aire, STD, HRC e IRC con los Plug & Play
botones ▲ o ▼ y, a continuación, pulse el botón ENTER.
Aire/Cable Aire
STD :
HRC
IRC
Ingresar Omitir
Continúa…
Español - 16
Ingresar Omitir
7 Pulse los botones ◄ o ► para ir a Mes, Día, Año, Hora, Minuto o am/pm. Plug & Play
Seleccione la fecha y la hora que desee pulsando los botones ▲ o ▼. Config. Reloj
Mes Día Año Hora Minuto am/pm
➢ Puede ajustar directamente Mes, Día, Año, Hora y Minuto con los botones –– –– –––– –– : –– am
numéricos del mando a distancia.
Mover Ajustar Ingresar
Español - 17
1 Utilice los botones numéricos para ir directamente a un canal. Por ejemplo, para
seleccionar el canal 27, pulse 2 y luego 7.
El televisor cambiará de canal cuando pulse el segundo número.
➢ Pulse los botones numéricos y después el botón ENTER para cambiar
rápidamente de canal.
1 Para seleccionar un canal superior a 100, por ejemplo, el 122, pulse “-”, y, a
continuación, “2” y “2”.
Español - 18
3 P
ulse los botones ▲/▼/◄/►/ENTER para ver, cambiar o usar las opciones
Mover Ingresar Salir
seleccionadas.
Para ver una descripción más detallada de cada función, consulte la página cor-
respondiente.
• Anynet+(HDMI-CEC), página 53
• Modo de la imagen, página 22
• Modo del sonido, página 33
• Temporizador, página 45
• SRS TS XT, página 34
• Ahorro de energía, página 48
• MTS, página 35
Visualización de la pantalla
La pantalla identifica el canal actual y el estado de algunos ajustes de audio-vídeo.
Español - 19
2 Pulse los botones ▲ o ▼ para seleccionar Prog. Auto y pulse el botón ENTER.
Mover Ingresar Regresar
3 Pulse el botón ENTER.
El televisor empezará a memorizar todos los canales disponibles.
Prog. Auto
Una vez los haya guardado, volverá a aparecer el menú Canal.
Pulse el botón ENTER para salir. Aire 22
Iniciar
➢ • Todos los canales analógicos se almacenan automáticamente en la
memoria.
Ingresar Regresar
• Se tarda de 3 a 10 minutos en memorizar los canales.
Español - 20
También puede pulsar el botón SOURCE del mando a distancia para ver una fuente de
señal externa.
2 Pulse los botones ▲ o ▼ para seleccionar las terminales de entrada AV1, AV2, TV Editar Nombre
AV1 :
S-Video, Componente1, Componente2, PC, HDMI1, HDMI2 o HDMI3 y, a AV2 :
-----
Vídeo
continuación, pulse el botónENTER. S-Video
Componente1
:
:
DVD
Cable STB
Componente2 : Satélite STB
3 Pulse los botones▲ o ▼ para seleccionar la fuente de entrada Vídeo, DVD, PC : PVR STB
Receptor AV
HDMI1 :
Cable STB, Satélite STB, PVR STB, Receptor AV, Juego, Filmadora, PC, TV, HDMI2
Juego
: - - - - - ▼
IPTV, Blu-ray, HD DVD o DMA y pulse el botón ENTER. HDMI3 : - - - - -
Mover Ingresar Regresar
Pulse el botón EXIT para salir.
Español - 21
Anynet+ (HDMI-CEC)
2 Pulse los botones ▲ o ▼ para seleccionar Modo de Imagen. Modo de Imagen ◄ Normal ►
Modo sonido : Favorito
3 Pulse los botones ◄ o ► para seleccionar la opción necesaria y después pulse Temporizador : Apagado
el botón ENTER. SRS TS XT
Ahorro energía
:
:
Apagado
Apagado
MTS : Estéreo
Mover Ajustar Salir
Español - 22
Se puede seleccionar el nivel de negro en la pantalla para ajustar la profundidad de TV Configuración detallada
ésta. Ajuste del negro : OffApagado
Contraste Dinám. : Medium
Bajo
4 Pulse los botones ▲ o ▼ para seleccionar Ajuste del negro y, a continuación, Gamma : 0 Medio
Espacio de color : Native
Alto
pulse el botón ENTER. Balanceo de blanco
Tono Piel : 0
5 Pulse los botones ▲ o ▼ para seleccionar Apagado, Bajo, Medio o Alto. Mejora de perfiles : Encendido
• Apagado: Desactiva la función de ajuste del contraste dinámico. Mover Ingresar Regresar
• Bajo: Establece el contraste dinámico en un nivel bajo.
• Medio: Establece el contraste dinámico en un nivel medio.
• Alto: Establece el contraste dinámico en un nivel alto.
Activación de gamma
Se puede ajustar la intensidad de los colores primarios (rojo, verde y azul). (-3 ~ +3) TV Configuración detallada
Ajuste del negro : Apagado ►
8 Pulse los botones ▲ o ▼ para seleccionar Gamma y, a continuación, pulse el Contraste Dinám. : Medio ►
botón ENTER. Gamma : 0
Espacio de color : Nativo
►
►
Balanceo de blanco ►
9 Pulse los botones ◄ o ► para disminuir o aumentar el valor. Tono Piel : 0 ►
Pulse el botón ENTER. Mejora de perfiles : Encendido ►
Gamma 0
Ajustar Regresar
Continúa…
Español - 23
13 P
ulse los botones ▲ o ▼ para seleccionar Color y, a continuación, pulse el TV Espacio de color
botón ENTER. Auto
Espacio de color : Off
➢ Color está disponible cuando Espacio de color está configurado como Color : Nativo
Favorito
Rojo 50
Favorito. Verde 0
Azul 0
14 Pulse los botones ▲ o ▼ para seleccionar Rojo, Verde, Azul, Amarillo, Cián o Reiniciar
Magenta. Pulse el botón ENTER.
15 Pulse los botones ▲ o ▼ para seleccionar Rojo , Verde o Azul a fin de Mover Ingresar Regresar
cambiarlos. Pulse el botón ENTER.
TV Espacio de color
16 Pulse los botones ◄ o ►para aumentar o reducir el valor de una opción concreta. Espacio de color : Favorito
Pulse el botón ENTER. Color : Rojo
Rojo Verde 50
➢ En Color, se pueden ajustar los valores RGB del color seleccionado. Verde Azul
Azul Amarillo
0
➢ Para restablecer el valor RGB ajustado, seleccione Reiniciar. Reiniciar Cian
0
Magenta
• Rojo: Ajusta el nivel de saturación del rojo del color seleccionado.
• Verde: Ajusta el nivel de saturación del verde del color seleccionado. Mover Ingresar Regresar
• Azul: Ajusta el nivel de saturación del azul del color seleccionado.
• Reiniciar: Restablece la gama de colores en los valores predeterminados.
Rojo 50
➢ El cambio del valor de ajuste renovará la pantalla ajustada. Mover Ajustar Regresar
➢ La configuración de cada dispositivo externo conectado a la entrada del
televisor se puede ajustar y guardar.
TV Configuración detallada
Activación del balance de blanco
Ajuste del negro : Apagado ►
Se puede ajustar la temperatura del color para conseguir colores más naturales. Contraste Dinám. : Medio ►
Gamma : 0 ►
Espacio de color : Nativo ►
17 P
ulse los botones ▲ o ▼ para seleccionar Balance de blanco, y pulse el Balanceo de blanco ►
botón ENTER. Tono Piel : 0
Mejora de perfiles : Encendido
►
►
18 Seleccione la opción adecuada pulsando los botones ▲ o ▼ y, a continuación,
pulse el botón ENTER. Mover Ingresar Regresar
19 Pulse los botones ◄ o ►para aumentar o reducir el valor de una opción Balanceo de blanco
concreta. Pulse el botón ENTER. Balance de Rojo 25
Balance de Verde 25
• Balance de Rojo: Ajusta la intensidad del color rojo. Balance de Azul 25
• Balance de Verde: Ajusta la intensidad del color verde. Ganancia de Rojo 25
Ganancia de Verde 25
• Balance de Azul: Ajusta la intensidad del color azul. Ganancia de Azul 25
• Ganancia de Rojo: Ajusta el brillo del color rojo. Reiniciar
• Ganancia de Verde: Ajusta el brillo del color verde.
• Ganancia de Azul: Ajusta el brillo del color azul. Mover Ingresar Regresar
•R einiciar: El balance de blanco anteriormente ajustado se restablecerá con los
valores predefinidos de fábrica. ▲
Balance de Rojo 25
▼
➢ El cambio del valor de ajuste renovará la pantalla ajustada. Mover Ajustar Regresar
Continúa…
Español - 24
Ajustar Regresar
Activación de la mejora de perfiles
Permite acentuar los bordes de los objetos en las imágenes.
TV Configuración detallada
22 P
ulse los botones ▲ o ▼ para seleccionar Mejora de perfiles y pulse el botón
Ajuste del negro : Apagado
ENTER. Contraste Dinám. : Medio
Gamma : 0
Espacio de color : Nativo
23 Pulse los botones ▲ o ▼ para seleccionar Apagado o Encendido. Balanceo de blanco
Tono Piel : 0
Pulse el botón ENTER. Mejora de perfiles : On
Apagado
Encendido
Mover Ingresar Regresar
Continúa…
Español - 25
2 P
ulse los botones ▲ o ▼ para seleccionar Tamaño y, a continuación, pulse el TV Tamaño
botón ENTER.
16:9
Zoom ancho
3 Pulse los botones ▲ o ▼ para seleccionar el formato de pantalla que desee. Zoom
Pulse el botón ENTER. 4:3
Sólo buscar
Pulse el botón EXIT para salir.
• 16:9: Ajusta la imagen al modo panorámico 16:9.
• Zoom ancho: Aumenta el tamaño de la imagen más que 4:3. Ajustar Ingresar Regresar
• Zoom: Aumenta el tamaño de la imagen en la pantalla.
• 4:3: Ajusta la imagen a modo normal 4:3. TV Tamaño
•S ólo buscar: Use esta función para ver la imagen completa sin cortes cuando la
16:9
entrada de la señal sea HDMI (720p/1080i) o Component (1080i). Zoom ancho
Zoom
4:3
Sólo buscar
O bien, puede pulsar repetidamente el botón P.SIZE del mando a distancia para cambiar
el tamaño de la imagen.
Continúa…
Español - 26
Continúa…
Español -
Español - 28
➢ Si desea suprimir los restos de imágenes de la pantalla, utilice las funciones Blanco o Desplazamiento. Aunque
ambas suprimen los restos de imágenes de la pantalla, la función Desplazamiento es más efectiva.
➢ La función de supresión de restos de imágenes debe aplicarse durante largo tiempo (aproximadamente 1 hora) para
que sea efectiva. Si los restos de imágenes no desaparecen después de ejecutar la función, repita el proceso.
➢ Pulse cualquier tecla del mando a distancia para cancelar esta función.
Continúa…
Español - 29
1 Siga las instrucciones 1 y 2 de Activación de las opciones de la imagen. Mover Ingresar Regresar
(Consulte la página 25)
TV Protección de Pantalla
Cambio de píxel ►
Blanco ►
2 Pulse los botones ▲ o ▼ para seleccionar Protección de Pantalla y, a Desplazamiento ►
continuación, pulse el botón ENTER. Lateral gris : Oscuro ►
3 Pulse el botón ENTER para seleccionar Cambio de píxel y, a continuación, TV Cambio de píxel
pulse el botón ENTER. Si pulsa los botones ▲ o ▼ alterna entre Encendido y Cambio de píxel : Apagado
Apagado. Punto horizontal : 2 Encendido
También verá las opciones Punto horizontal, Línea vertical y Tiempo. Línea vertical
Tiempo
:2
: 2 min
•C
ambio de píxel: Con esta función podrá mover píxeles de forma detallada en
el PDP, en sentido horizontal o vertical, para evitar restos de imágenes en la
pantalla.
Mover Ingresar Regresar
TV Cambio de píxel
4 Pulse los botones ▲ o ▼ para seleccionar la opción que desea cambiar y pulse Cambio de píxel : Encendido
Punto horizontal : 0
el botón ENTER. Línea vertical :1
Pulse los botones ▲ o ▼ para cambiar el valor de la opción y pulse el botón Tiempo 2
: 4min
3
ENTER. 4
Español - 30
Gafas D
(no suministradas).
Panel posterior
del TV
Emisor de infrarrojos D
(no suministrado).
1 Conecte un cable HDMI/DVI entre la terminal HDMI IN 2 del televisor y la terminal de salida PC del ordenador.
Conecte un cable estéreo de 3,5mm/2 RCA entre la terminal DVI IN (HDMI 2) [R-AUDIO-L] del televisor y la terminal
de salida de audio de la tarjeta de sonido del ordenador.
Conecte el emisor al puerto 3D SYNC OUT del panel posterior del televisor.
Encienda el televisor y ajuste la fuente del mismo en HDMI2.
➢ Para obtener más información acerca de las gafas 3D (incluido el emisor), consulte el manual del usuario de las gafas
3D.
➢ Ajuste la resolución del ordenador : - PL42A450P1 : 1024 x 768@60Hz
- PL50A450P1 : 1024 x 768@60Hz,1360 x 768@60Hz
➢ El emisor de infrarrojos 3D se comunica con las gafas 3D.
Por consiguiente, el emisor de infrarrojos 3D debe estar situado cerca de las gafas 3D.
➢ Se activa cuando la señal de entrada HDMI o DVI es RGB, y admite el sonido DVI.
➢ Cuando se enciende o se apaga, el modo cambia a predeterminado (Apagado) y Formato se guarda.
➢ El Efecto D se enciende o se apaga independientemente del Modo de Imagen.
➢ Cuando el Efecto D está encendido, sólo se activan los menús “Celda de luz” Contraste, Brillo, Efecto D y Reini-
cio imagen.
➢ Si se cancela el Efecto D, N.neg HDMI vuelve a su valor anterior.
➢ Al usar la Función 3D, necesario una tarjeta de grafi cos o software 3D.
➢ Las gafas 3D (incluido el emisor) que no hayan sido fabricadas por Samsung, RealD e ilixco pueden no ser compati-
bles.
➢ Las gafas 3D y el emisor deben ser del mismo fabricante.
➢ Si juega o ve la televisión durante un tiempo prolongado llevando puestas las gafas 3D, puede experimentar fatiga
ocular o dolor de cabeza.
➢ Las gafas 3D (incluido el emisor) que no hayan sido fabricadas por Samsung pueden no ser compatibles.
➢ Si la pantalla parpadea cuando se usa la función 3D, se debe oscurecer la iluminación ambiental o apagar la lámpara
fl uorescente para ver la pantalla en las mejores condiciones.
Cambio de modo TV Picture
Mode : Standard ►
Al cambiar el modo se intercambian las señales de salida izquierda y derecha Cell Light 7
Contrast 90
y, con ello, las imágenes destinadas a cada ojo. Brightness 45
Sharpness 50
Color 50
1 Conecte el televisor, el ordenador y el emisor de infrarrojos 3D como se Tint G 50
Detailed Settings
R 50
►
muestra en la ilustración. Picture Options
Reset : OK
►
►
Pulse el botón SOURCE para seleccionar HDMI. Mover Ingresar Regresar
Pulse el botón MENU para ver el menú. Pulse los botones ▲ o ▼ para
seleccionar Imagen y pulse el botón ENTER.
Continúa…
Español - 1
TV Efecto 3D
Off
Modo :
Cambio de formato Formato : Modo 1
Modo 2
TV Efecto 3D
5 Pulse los botones ▲ o ▼ para seleccionar Formato y, a continuación,
Modo : Modo 1
pulse el botón ENTER. Formato :
Tablero de ajedrez
Horizontal
Vertical
6 Pulse los botones ▲ o ▼ para seleccionar Tablero ajedrez, Horizontal o
Vertical y pulse el botón ENTER.
Si el formato de salida de la tarjeta gráfica o
Tablero ajedrez del software 3D es Tablero ajedrez, seleccione Mover Ingresar Regresar
este formato de entrada.
Si el formato de salida de la tarjeta gráfi ca
Horizontal o del software 3D es Horizontal interlazado,
seleccione este formato de entrada.
Si el formato de salida de la tarjeta gráfica
Vertical o del software 3D es Vertical interlazado,
seleccione este formato de entrada.
Español - 32
3 Pulse los botones ◄ o ► para seleccionar una frecuencia determinada con el TV Ecualizador
fin de ajustarla.
Pulse los botones ▲ o ▼ para aumentar o reducir el nivel de una frecuencia D + +
concreta. 0 0
• Ajuste de balance de sonido I/D: Para ajustar el balance de sonido de los Balance 100Hz 300Hz 1KHz 3KHz 10KHz
Español - 33
TruSurround XT, SRS y el símbolo son marcas comerciales de SRS Labs, Inc.
La tecnología TruSurround XT está incorporada bajo licencia de SRS Labs, Inc.
Español - 34
2 Pulse los botones ▲ o ▼ para seleccionar MTS y, a continuación, pulse el Mover Ingresar Regresar
botón ENTER.
TV Sonido
Modo : Favorito
3 Pulse los botones ▲ o ▼ para seleccionar la configuración que desee y, a Ecualizador
continuación, pulse el botón ENTER. SRS TS XT
MTS
: Apagado
Mono
: Stereo
Vol.Auto : Off Estéreo
Pulse el botón EXIT para salir. Altavoz TV : On SAP
Sel. Sonido : Principal
• Mono: Elija para canales que emiten en monoaural o si tiene dificultades con la Mover Ingresar Regresar
recepción de señales estéreo.
• Estéreo: Elija para canales que emiten en estéreo.
• SAP: Elija esta opción para escuchar el programa de audio independiente, que
normalmente es una traducción de otro idioma.
TV Sonido
Español - 35
TV Sonido
1 Pulse el botón MENU para ver el menú.
Pulse los botones ▲ o ▼ para seleccionar Sonido y, a continuación, pulse el Modo : Favorito
Ecualizador
►
►
botón ENTER. SRS TS XT : Apagado ►
MTS : Estéreo ►
Vol.Auto : Apagado ►
2 Pulse los botones ▲ o ▼ para seleccionar Altavoz TV y, a continuación, pulse Altavoz TV : Encendido ►
el botón ENTER. Sel. Sonido : Principal ►
Altavoces internos del televisor Salida de audio (I/D) del sistema de sonido
TV AV, S-Vídeo Componente, PC y TV AV, S-Vídeo Componente, PC y
HDMI HDMI
Altavoz del Salida de Salida de Salida de Salida de Salida de Salida de sonido
televisor altavoces altavoces altavoces sonido sonido
encendido
Altavoz del Silencio Silencio Silencio Salida de Salida de Salida de sonido
televisor apagado sonido sonido
Sin señal del vídeo Silencio Silencio Silencio Silencio Silencio Silencio
3 Pulse los botones ▲ o ▼ para seleccionar Sub y, a continuación, pulse el botón TV Sonido
ENTER. Modo : Favorito
Ecualizador
Pulse el botón EXIT para salir. SRS TS XT : Apagado
MTS : Estéreo
Vol.Auto : Apagado
•P rincipal: Se usa para escuchar el sonido de la imagen principal. Altavoz TV : Off Principal
Sel. Sonido : Main Sub
• Sub: Se usa para escuchar el sonido de la imagen secundaria.
Mover Ingresar Regresar
➢ Puede seleccionar esta opción cuando PIP está ajustado como Encendido.
Español - 36
Español - 37
Lista de canales
4 Pulse los botones ▲/▼/◄/► para ir al campo ( ). Aire 3 1/7
Air 3
➢ Si vuelve a pulsar el botón ENTER, el símbolo ( ) que aparece junto al Air 4
canal desaparece y éste no se añade. Air
Air 6
5
Air 7
Air 8
5 Repita el paso 5 con cada canal que desee seleccionar o cancelar. Air 9
Air 10
Air 11
Pulse el botón EXIT para salir.
▼
Agregar Bloquear
Pulse el botón CH LIST del mando a distancia para que se muestre una lista de canales.
Español - 38
Air 3
Air 4
Air 5
7 Repita el paso 7 con cada canal que desee bloquear o desbloquear. Air 6
Air 7
Pulse el botón EXIT para salir. Air 8
Air 9
➢ Seleccione Encendido o Apagado en Bloqueo para activar o desactivar Air
Air
10
11 ▼
fácilmente los canales que estén marcados con ( ). Agregar Bloquear
➢ Aparece una pantalla azul cuando se activa la función Bloqueo. Mover Ingresar
Página Regresar
Pulse el botón CH LIST del mando a distancia para que se muestre una lista de canales.
Español - 39
Aire 3
Reiniciar
Sintonia Fina
4 Para guardar la sintonización fina en la memoria del televisor, pulse el botón Aire 3*
ENTER. +10
Para reiniciar la sintonización fina, pulse el botón ▼ para seleccionar Reiniciar Reiniciar
y, a continuación, pulse el botón ENTER. Ajustar Guardar Regresar
Reiniciar
TV Canal
2 Pulse los botones ▲ o ▼ para seleccionar Sistema Color y, a continuación,
pulse el botón ENTER. Aire/Cable
Prog. Auto
: Aire
Gestor de canales
3 Pulse los botones▲ o ▼ para seleccionar el estándar de color deseado (Auto, Sintonia Fina
PAL-M, PAL-N o NTSC) y, a continuación, pulse el botón ENTER.. Sistema Color : Auto Auto
PAL-M
Pulse el botón EXIT para salir. PAL-N
NTSC
Mover Ingresar Regresar
Español - 40
Modos de visualización
Si la señal desde el sistema es igual al modo de señal estándar, la pantalla se ajustará automáticamente. Si la señal del
sistema no es igual al modo de señal estándar, ajuste el modo consultando la guía del usuario de la tarjeta de vídeo;
de lo contrario, puede no haber señal de vídeo. La imagen de pantalla se ha optimizado durante la fabricación para los
siguientes modos de visualización.
Entrada D-Sub
Frecuencia de
Frecuencia vertical Polaridad sincr. (H/
Modo Resolución Frecuencia horizontal (kHz) reloj de píxeles PL42A450P1 PL50A450P1
(Hz) V)
(MHz)
640 x 350 31.469 70.086 25.175 +/- ✔ ✔
IBM
720 x 400 31.469 70.087 28.322 -/+ ✔ ✔
640 x 480 31.469 59.940 25.175 -/- ✔ ✔
640 x 480 37.861 72.809 31.500 -/- ✔ ✔
640 x 480 37.500 75.000 31.500 -/- ✔ ✔
800 x 600 37.879 60.317 40.000 +/+ ✔ ✔
800 x 600 48.077 72.188 50.000 +/+ ✔ ✔
VESA
800 x 600 46.875 75.000 49.500 +/+ ✔ ✔
1024 x 768 48.363 60.004 65.000 -/- ✔ ✔
1024 x 768 56.476 70.069 75.000 -/- ✔ ✔
1024 x 768 60.023 75.029 78.750 +/+ ✔ ✔
1360 x 768 47.712 60.015 85.500 +/+ ✔
Entrada HDMI/DVI
Frecuencia de
Frecuencia vertical Polaridad sincr. (H/
Modo Resolución Frecuencia horizontal (kHz) reloj de píxeles PL42A450P1 PL50A450P1
(Hz) V)
(MHz)
640 x 480 31.469 59.940 25.175 -/- ✔ ✔
800 x 600 37.879 60.317 40.000 +/+ ✔ ✔
VESA
1024 x 768 48.363 60.004 65.000 -/- ✔ ✔
1360 x 768 47.712 60.015 85.500 +/+ ✔
• Cuando se usa una conexión de cable HDMI/DVI, se debe conectar en la toma HDMI IN 2.
• No se admite el modo entrelazado.
• La televisión no funciona correctamente si se selecciona un formato de vídeo que no sea estándar.
• La tabla anterior está conforme con la normativa de IBM/VESA y se basa en la utilización de una entrada analógica.
• La marca “ ✔ ” indica que se admite este modo.
Español - 41
Herramientas
Configuración sencilla Anynet+ (HDMI-CEC)
Modo de Imagen : Normal
1 Pulse el botón TOOLS del mando a distancia. Modo sonido : Favorito
Temporizador : Apagado
2 Pulse los botones ▲ o ▼ para seleccionar Ajuste Automático y, a SRS TS XT : Apagado
continuación, pulse el botón ENTER. Ahorro energía
PIP
: Apagado
Ajuste Automático
Mover Ingresar Salir
Grueso 50
Continúa…
Español - 42
Español - 43
3 Pulse los botones ◄ o ► para ir a Mes, Día, Año, Hora, Minuto, o am/pm. TV Config. Reloj
Seleccione la fecha y la hora que desee pulsando los botones ▲ o ▼; pulse
después el botón ENTER. Mes Día Año
01 01 2008
Pulse el botón EXIT para salir. Hora Minuto am/pm
➢ La hora actual aparecerá siempre que se pulse el botón INFO. 05 30 am
➢ Puede ajustar directamente Mes, Día, Año, Hora y Minuto con los botones Mover Ajustar Regresar
numéricos del mando a distancia.
Continúa…
Español - 44
(Para activar el temporizador con la configuración deseada, establézcalo en Mover Ajustar Regresar
Encendido.)
• Volumen: Seleccione el nivel de volumen deseado.
• Canal: Seleccione el canal deseado.
• Repetir: Seleccione Una vez, Cada día, Lun~Vie, Lun~Sáb o Sáb~Dom.
➢ Puede ajustar Mes, Día, Año, Hora y Minuto directamente pulsando los
botones numéricos del mando a distancia.
➢ Apagado automático
Si el temporizador se ajusta en “Encendido”, el televisor se apagará si no
se pulsa ningún botón durante 3 horas, después de que el temporizador
lo haya puesto en marcha. Esta función sólo está disponible en el modo
“Encendido” del temporizador y evita el recalentamiento que se puede
producir si un televisor está encendido durante demasiado tiempo.
Español - 45
2 Pulse los botones ▲ o ▼ para seleccionar Efecto de luz y, a continuación, TV Configuración externa
Apagado
pulse el botón ENTER. Efecto de luz :
Modo espera act.
Montaje mural
Pulse los botones ▲ o ▼ para seleccionar Apagado, Modo espera act., Modo Melodía :
Modo vis. act.
Ecendido
vis. act. o Encendido y, a continuación, pulse el botón ENTER.
Pulse el botón EXIT para salir.
Español - 46
Pulse los botones ▲ o ▼ para seleccionar Apagado, Bajo, Medio o Alto y, a TV Configuración externa
continuación, pulse el botón ENTER. Efecto de luz : Modo vis. act.
Montaje mural
• Apagado: Apaga la función de la melodía. Melodía : Apagado
• Bajo: Establece el volumen de la melodía en un nivel bajo. Bajo
• Medio: Establece el volumen de la melodía en un nivel medio. Medio
Alto
• Alto: Establece el volumen de la melodía en un nivel alto.
➢ La melodía no se reproduce
- Cuando no hay salida de sonido desde el televisor porque se ha activado
el botón MUTE.
- Cuando no hay salida de sonido desde el televisor porque se ha reducido
el volumen al mínimo pulsando el botón VOL .
- Cuando la función de Temporizador ha apagado el televisor.
Español - 47
➢ Si configura cualquiera de los tres modos de Entretenimiento como Encendido, la configuración se bloquea y no se puede ajustar.
Si desea configurar los modos Imagen y Sonido, debe desactivar el modo Entretenimiento.
➢ La configuración de Entretenimiento se guarda para cada fuente de entrada.
Puede pulsar varias veces el botón E.MODE del mando a distancia para cambiar la
configuración de Entretenimiento.
Español - 48
4 Según la emisión concreta, puede ser necesario hacer cambios en Canal y TV Subtítulo
Campo: Pulse los botones ▲ o ▼ para hacer los cambios Subtítulo
Modo
: Encendido
: Subtítulo
(siga el mismo procedimiento que en el paso 3 anterior). Canal
Campo
:1 1
:1
Pulse el botón EXIT para salir. 2
También puede pulsar el botón CC del mando a distancia para configurar los subtítulos
como Encendido o Apagado.
Español - 49
Español - 50
Configuración sencilla
1 Pulse el botón TOOLS del mando a distancia. Herramientas
Anynet+ (HDMI-CEC)
2 Pulse los botones ▲ o ▼ para seleccionar PIP y, a continuación, pulse el botón Modo de Imagen : Normal
Modo sonido : Diálogo
ENTER. Temporizador : Apagado
SRS TS XT : Apagado
3 Pulse los botones ▲ o ▼ para seleccionar una opción concreta. Ahorro energía : Apagado
PIP
4 Pulse los botones ◄ o ► para seleccionar la opción deseada.
Mover Ingresar Salir
5 Pulse los botones EXIT o TOOLS para salir.
PIP
PIP ◄ Encendido ►
Origen : TV
Tamaño :
Posición :
Canal : Air 7
Español - 51
¿Qué es Anynet+?
Anynet+ es un sistema de red de AV que permite controlar todos los dispositivos AV de Samsung conectados con
el mando a distancia del televisor Samsung.
Cable HDMI
Cable HDMI
Cable HDMI
Cable HDMI
Cable HDMI
Español - 52
Para usar la función Anynet+, Anynet+ (HDMI-CEC) debe estar configurado como
Encendido.
1 Pulse el botón MENU para mostrar el menú. TV Aire 11
Pulse los botones ▲ o ▼ para seleccionar Entrada y, a continuación, pulse el botón ENTER. Ver TV
Seleccionar dispositivo
2 Pulse los botones ▲ o ▼ para seleccionar Anynet+ (HDMI-CEC) y, a continuación, pulse el Grabar
botón ENTER. Menú en dispositivo
Funcionamiento del disp.
3 Pulse los botones ▲ o ▼ para seleccionar Configuración y, a continuación, pulse el botón Receptor :Apagado(Apag.)
ENTER. Configuración
Mover Ingresar
4 Pulse los botones ▲ o ▼ para seleccionar Anynet+ (HDMI-CEC). Regresar
5 Pulse los botones ▲ o ▼ para seleccionar Encendido y, a continuación, pulse el botón Configuración
ENTER. Anynet+ (HDMI-CEC) : OffApagado
➢ La función Anynet+ (HDMI-CEC) está activada. Apagado automático : OffEncendido
➢ Si selecciona Apagado, Anynet+ (HDMI-CEC) se desactiva. Buscando conexiones
➢ Cuando la función Anynet+ (HDMI-CEC) está desactivada, todas las operaciones
relacionadas con Anynet+ se desactivan. Mover Ingresar Regresar
Configuración de un dispositivo Anynet+ para que se desactive automáticamente cuando el televisor se apaga
4 Pulse los botones ▲ o ▼ para seleccionar Apagado automático y, a continuación, pulse el Configuración
botón ENTER. Anynet+ (HDMI-CEC) : Encendido
5 Pulse los botones ▲ o ▼ para seleccionar Sí y, a continuación, pulse el botón ENTER. Apagado automático : Off
No
➢ La función Apagado automático se activa. Buscando conexiones
Sí
➢ Si selecciona No se cancela la función Apagado automático.
Mover Ingresar Regresar
Pulse el botón EXIT para salir.
➢ Para usar la función Anynet+, el valor Seleccionar dispositivo del mando a distancia debe ajustarse en TV.
➢ Si establece Apagado automático como Sí, los dispositivos externos conectados también se desactivan cuando se apaga el televisor.
Sin embargo, si el dispositivo está grabando, puede que no se apague.
Apagado automático : Sí ►
Buscando conexiones ►
➢ El cambio a los dispositivos seleccionados puede tardar unos 2 minutos. No se puede cancelar la operación de cambio de dispositivo
mientras ésta se está efectuando.
➢ El tiempo necesario para la búsqueda de dispositivos depende de la cantidad de dispositivos conectados.
➢ Cuando finaliza la búsqueda de dispositivos, no se muestra el número de dispositivos encontrados.
➢ Aunque el televisor explora automáticamente los dispositivos cuando se enciende con el botón POWER, los dispositivos conectados
cuando el televisor ya está encendido no aparecen en la lista de dispositivos. En tal caso, seleccione el menú Buscando conexiones
para buscar los dispositivos.
➢ Si ha seleccionado el dispositivo AV externo pulsando el botón SOURCE, no podrá usar la función Anynet+. Asegúrese de cambiar a un
dispositivo Anynet+ mediante el botón TOOLS.
Continúa…
Español - 53
El menú Anynet+ cambia según el tipo y el estado de los dispositivos Anynet+ conectados al televisor.
Menú Anynet+ Descripción
Ver TV Cambia de Anynet+ al modo de emisión de TV.
Grabar Comienza una grabación. (Este menú sólo funciona con dispositivos que admiten
grabación.)
Menú en dispositivo Muestra el menú del dispositivo conectado.
(Nombre_dispositivo) Ejemplo: Cuando hay un grabador de DVD conectado, aparece el menú de títulos del
grabador de DVD.
Funcionamiento del disp.(Nombre_d Muestra el menú de control de reproducción del dispositivo conectado.
ispositivo) Ejemplo: Cuando hay un grabador de DVD conectado, aparece el menú de control de
reproducción del grabador de DVD.
Conexión (Nombre_dispositivo) El televisor está conectado al dispositivo correspondiente.
Receptor La salida de sonido se efectúa a través del receptor (sistema Home Cinema). Un flujo
de audio en HDMI se envía en una sola dirección, del dispositivo al televisor. Pero en el
televisor hay una salida SPDIF. Así el sonido del televisor se puede enviar al sistema Home
Cinema.
Configuración Se puede configurar que Anynet+ (HDMI-CEC) se apague automáticamente así como la
búsqueda de las conexiones para usar Anynet+.
Botones VOL /
Dispositivo de audio Cuando la opción Receptor está activada
Botón MUTE
➢ La función Anynet+ sólo funciona cuando el mando a distancia está ajustado en TV.
➢ El botón REC funciona sólo cuando la grabación es posible.
➢ Los dispositivos Anynet+ no se pueden controlar con los botones del lateral del TV. Los dispositivos Anynet+ sólo se
pueden controlar mediante el mando a distancia del televisor.
➢ El mando a distancia del televisor puede no funcionar en determinadas circunstancias. En ese caso, vuelva a
seleccionar el dispositivo Anynet+.
➢ Las funciones Anynet+ no funcionan con los productos de otros fabricantes.
➢ El funcionamiento de , puede variar según el dispositivo.
Grabación
El grabador de Samsung permite efectuar una grabación de un programa de televisión.
Pulse el botón REC.
Comienza la grabación. (Sólo cuando está conectado el dispositivo de grabación Anynet+ activado.)
➢ Se puede grabar las transmisiones de la fuente seleccionando Grabar después de pulsar el botón TOOLS.
➢ El programa de TV actual se graba en el estado Modo vis. act.. Si está viendo un vídeo desde otro dispositivo, se
graba el vídeo de éste.
➢ Antes de grabar, compruebe si el terminal de la antena está conectado correctamente al dispositivo de grabación.
Para conectar la antena al dispositivo de grabación, consulte el manual del usuario del dispositivo.
Español - 54 Continúa…
Español - 55
Resolución de problemas
Si cree que el televisor tiene un problema, compruebe primero esta lista de posibles problemas y soluciones.
Si no funciona ninguno de estos consejos, llame al centro de servicio técnico Samsung más cercano.
Problema Posible solución
Mala calidad de imagen. Pruebe con otro canal.
Ajuste la antena.
Compruebe las conexiones de todos los cables.
Sonido de mala calidad. Pruebe con otro canal.
Ajuste la antena.
No hay imagen ni sonido. Pruebe con otro canal.
Pulse el botón SOURCE.
Compruebe que el televisor esté enchufado.
Compruebe las conexiones de la antena.
Asegúrese de que no haya pulsado el botón MUTE.
No hay sonido o se oye demasiado Primero, revise el volumen de los aparatos conectados al televisor (receptor de emisión
bajo con el volumen al máximo. digital, DVD, receptor de cable, vídeo, etc.). A continuación, ajuste el volumen del televisor
según corresponda.
La imagen se mueve verticalmente. Compruebe todas las conexiones.
El televisor funciona de forma inestable. Desenchúfelo durante 30 segundos y vuelva a intentarlo.
El televisor no se enciende. Compruebe que la toma de la pared funcione.
El mando a distancia no funciona Sustituya las pilas del mando a distancia.
correctamente. Limpie el borde superior del mando a distancia (ventana de transmisión).
Compruebe los terminales de las pilas.
Asegúrese de que el mando a distancia tenga pilas.
Compruebe que los polos “+” y “-” de las pilas estén correctamente colocados.
Problema en pantalla con la Compruebe la potencia de la señal digital y la antena de entrada.
emisión digital.
La imagen es demasiado clara o Ajuste el brillo y el contraste.
demasiado oscura. Realice una sintonización fina.
La imagen es demasiado grande o Ajuste los parámetros de tamaño.
demasiado pequeña.
La calidad visual de los canales La calidad visual de los canales digitales puede variar según el método original de
digitales puede variar. producción (analógico o digital).
- Si el método de producción original es digital: Calidad visual alta.
- Si el método de producción original es analógico: El programa digital mostrado en la
pantalla es originalmente un programa analógico que se ha convertido a digital.
La calidad visual es de grado SD (definición estándar).
La pantalla está en blanco y el En el ordenador, compruebe los cables de señal y de alimentación.
indicador de encendido parpadea El televisor está usando su sistema de gestión de energía.
constantemente. Mueva el ratón del ordenador o pulse cualquier tecla.
En el equipo, compruebe (STB, DVD, etc.); el cable de señal y el de alimentación.
El televisor está usando su sistema de gestión de energía.
Pulse el botón Source del mando a distancia o del panel.
Encienda y apague el televisor.
Aunque el subtítulo del televisor El subtítulo HD (Alta definición) que aparece al cambiar de canal o al pulsar el botón INFO
muestre HD (Alta definición), la del mando a distancia significa que el canal seleccionado es un canal digital. Si la emisora
calidad visual no es satisfactoria. convierte una señal analógica en digital y la transmite, es posible que la calidad visual no
sea perfecta.
Aparece una imagen distorsionada Si la función Sólo buscar está seleccionada en varios dispositivos externos, puede
en la esquina de la pantalla. aparecer una imagen distorsionada en la esquina de la pantalla. Este síntoma se origina
en los dispositivos externos, no en el televisor.
Se oye un ruido extraño. La causa es un menor funcionamiento del sistema y no se trata de ningún defecto.
Aparece el mensaje “Devuelve Aparece cuando el botón EXIT se mantiene pulsado durante unos momentos. La
todos los ajustes a los valores configuración del producto se reinicia con los valores predeterminados.
predeterminados”.
➢ E ste panel de plasma consta de subpíxeles (6.220.800) que requieren tecnología sofisticada para su fabricación. No obstante,
puede que existan algunos píxeles brillantes u oscuros en la pantalla. Estos píxeles no influirán en el rendimiento del aparato.
Español - 56
Acceso al menú
1 Pulse los botones ▲, ▼, ◄ o ► del mando a distancia.
TV Configuración externa
➢ Se muestra la pantalla Ajuste de montaje en pared. Efecto de luz : Modo vis. act. ►
➢ Si no se muestra la pantalla Ajuste de montaje en pared cuando se hace clic Ajuste de montaje en pared ►
en un botón de dirección mientras se está viendo la televisión, use el menú Melodía : Medio ►
para mostrar la pantalla.
• Pulse el botón MENU para ver el menú.
Pulse los botones ▲ o ▼ para seleccionar Configuración y pulse el botón
ENTER.
Mover Engresar Regreasar
• Pulse los botones ▲ o ▼ para seleccionar Montaje en pared y, a
continuación, pulse el botón ENTER.
Memorización de la posición
2 Ajuste la posición deseada mediante los botones ▲, ▼, ◄, ►. Ajuste de montaje en pared
➢ Si pulsa un botón de flecha sin que haya aparecido un OSD en la pantalla del ►
televisor, aparece la pantalla de ajuste.
►
►
➢ Pulse el botón INFO para reiniciar. Pulse los botones ◄ o ► para seleccionar
Sí y, a continuación, pulse el botón ENTER. La posición se inicializa con la
►
configuración predeterminada.
Posición 1 2 3
Ajustar Guardar Central
3 Pulse el botón azul.
Pulse los botones ▲ y ▼ para seleccionar un modo de guardar entre Posición 1,
Posición 2 o Posición 3 en este orden para guardar la posición actual.
➢ Si no desea guardar la posición actual, pulse el botón RETURN.
➢ Cuando se selecciona un modo de guardar, no se pueden usar los botones de
colores.
Guardar
4 Pulse el botón ENTER para guardar. Seleccione un modo para guardar.
➢ Cuando se selecciona Posición 1, se muestra el mensaje Posición actual Posición 1
guardada como Posición 1. Posición 2
Posición 3
5 Pulse el botón ENTER.
Ajustar Ingresar Regresar
➢ La posición guardada se muestra en la parte izquierda de la OSD.
Continúa…
Español - 57
►
Posición 1
posición guardada.
►
►
➢ Se puede mover el montaje mural a una de las 3 posiciones preconfiguradas
con los botones rojo (posición 1), verde (posición 2) o amarillo (posición 3).
►
➢ Si después de usar una posición preconfigurada se ajusta ésta, la Posición 1 2 3
visualización de la posición desaparece. Ajustar Guardar Central
➢ Para la instalación, consulte el manual de instalación proporcionado con el
equipo de montaje mural.
➢ Para la instalación del producto, así como la instalación y movimiento del
montaje en la pared, consulte a una empresa especializada en instalaciones.
➢ La instalación manual se debe usar al colocar el equipo de montaje en una
pared. Para colocarlo en otros materiales de construcción, póngase en
contacto con el distribuidor más cercano.
➢ El montaje mural no está operativo cuando Anynet+ está funcionando.
➢ El modelo de 42 pulgadas no es compatible con el antiguo modelo de montaje en pared (WMN5090A).
Español - 58
Especificaciones
Familia de producto Pulgadas Tornillo estándar Cantidad
VESA (A * B)
23 ~ 26 200 * 100 M4
32 ~ 40 200 * 200 M6
400 * 400
46 ~ 52
600 * 400
Televisor LCD 4
700 * 400
57
(No VESA) M8
57 ~ 70 800 * 400
80 ~ 1400 * 800
400 * 400
42 ~ 58 4
600 * 400
676 * 407
63 6
Televisor PDP (No VESA) M8
63 ~ 70 800 * 400 4
80 ~ 1400 * 800 4
➢ Se ofrecen las dimensiones estándar para los equipos de montaje en pared, como se muestra en la tabla anterior.
➢ Al adquirir el equipo de montaje en pared, también se distribuye un manual de instalación detallado y todas las piezas
necesarias para el montaje.
➢ No use tornillos con un tamaño superior al estándar, ya que pueden causar daños en el interior del televisor.
➢ Para montajes murales que no cumplen las especificaciones de tornillos estándar VESA, la longitud de éstos puede
variar dependiendo de las especificaciones.
➢ No use tornillos que no cumplan las especificaciones de tornillos estándar VESA.
No apriete excesivamente los tornillos, ya que podría dañar el producto o provocar la caída de éste con riesgo de
causar lesiones personales. Samsung no se hace responsable de este tipo de accidentes.
➢ Samsung no se hace responsable de daños o lesiones personales cuando se usa un montaje en pared que no es
VESA o que no cumple las especificaciones, o si el cliente no sigue las instrucciones de instalación del producto.
➢ Nuestros modelos de 57” y 63” no cumplen con las especificaciones VESA. Por ello, debe usar un equipo de montaje
en pared exclusivo para este modelo.
➢ No supere los 15 grados de inclinación cuando monte este televisor.
Español - 59
Advertencia
Sujete firmemente el soporte al
televisor antes de moverlo, ya que
el soporte puede caer y causar
lesiones graves.
Especificaciones
-20° ~ 20°
Español - 60