Documente Academic
Documente Profesional
Documente Cultură
This tab contains settings for the display of the target lambda, which is used to determine the fuel change
if a wide band lambda meter is used while datalogging.
The target lambda for tuning over three different load areas. The Low Load Target Lambda is used
when the engine load is below the low engine load value. The Medium Load Target Lambda is used
when the engine load is between the low and high engine load values. The High Load Target Lambda is
used when the engine load is above the high engine load value.
Lambda Overlay
Lambda overlay allows you to over the lambda reading from datalogging over the fuel tables
You can change the Lambda Overlay either from the toolbar or the menu:
Fuel Adjustment - shows the estimated adjustment to the fuel table necessary to alter the measured
lambda to meet the target lambda.
Target Lambda - shows the target lambda as entered in the Settings Window
Notes: