Documente Academic
Documente Profesional
Documente Cultură
The extensive range of Gyproc boards and skimming plasters is fully supported by high grade metal system components and
accessories, and a wide range of ceiling tiles and boards. This unrivalled choice of products enables the designer to specify
complete integrated systems with total confidence.
Prroducts
Product index
Boards Plasters
Gyproc standard plasterboards 218 Skimming plasters 239
Gyproc performance plasterboards 219-222
Specialist boards 223
Plasterboard accessories
Gyproc jointing materials 236
Gyproc miscellaneous accessories 237
Gyproc beads 237
www.gyproc.ae 215
Plasterboards
www.gyproc.ae
216
Gyproc plasterboards Bespoke products
Gyproc plasterboards are the ultimate lining solution for Gyproc offers a comprehensive bespoke service for the
today's buildings, providing high levels of fire, sound, Gyproc plasterboard and Gypframe metal product ranges.
thermal, moisture and impact resistance to create modern Whether you require a non-standard length, alternative edge
internal environments that offer comfort and safety for profile or other specification change, we will try to provide
occupants. They offer high quality, high performance linings you with the best solution for your project.
for walls and ceilings, lift shafts and stairwells, corridors and
auditoria, in buildings as diverse as houses, schools, hospitals For more information contact the customer service centre on
Plasterboards
and cinemas. +971 800 GYPROC (497762)
www.gyproc.ae 217
Gyproc standard plasterboards
Gyproc Regular
Gyproc Regular is a plasterboard that is suitable for drylining using Gyproc Fibre Tape or Gyproc Paper Tape and Gyproc
internal surfaces. Jointing Compound. Suitable for direct decoration.
Product Matrix
Width (mm) Length (mm)* Edge Type
9mm
1200 2400, 3000 T/E
1220 2440 T/E
12.5mm
1200 2000, 2400, 2500, 2600, 2700, 2800, 3000 T/E
1220 2440, 3000 T/E
12.7mm
1200 2000, 2400, 2500, 2600, 2700, 2800, 3000 T/E
1220 2440, 3000 T/E
15mm
1200 2400, 3000 T/E
1220 2440, 3000 T/E
15.9mm
1200 2400, 3000 T/E
1220 2440, 3000 T/E
* other lengths available on request
218 www.gyproc.ae
Gyproc performance plasterboards
Gyproc Activ'Air1
Plasterboards
paperliners and is suitable for drylining internal surfaces. Suitable for direct decoration.
Gyproc Activ’Air actively improves indoor air quality by
permanently removing 70% of formaldehydes.
Product Matrix
Width (mm) Length (mm)* Edge Type
12.5mm
1200 2400, 3000 T/E
12.7mm
1200 2400, 3000 T/E
15mm
1200 2400, 3000 T/E
15.9mm
1200 2400, 3000 T/E
1
Gyproc Activ’Air is also available in a Moisture Resistant, FireStop, DuraLine and M2TECH variant.
* other lengths available on request
ilab
ava le
wi
now
15mm
1200 2400, 3000 T/E
1220 2440, 3000 T/E
15.9mm
1200 2400, 3000 T/E
1220 2440, 3000 T/E
* other lengths available on request
www.gyproc.ae 219
Gyproc performance plasterboards
NEW ilab
ava le
Gyproc M2TECH1
wi
also
th
Product Characteristics Applications
Gyproc M2TECH board is a high performance board formulated The system has been specially developed for high moisture
with biocide and other additives in its core, enclosed with 100% environments, such as kitchens, wet rooms, gym and pool areas
Plasterboards
recycled back paper, for applications where enhanced mold and etc. It is ideal as a wall and ceiling lining in residential,
moisture resistance is required. commercial, educational and healthcare buildings. The boards
must be finished using Mold-Resistant Fibre Tape and
ready-mixed mold and moisture resistant Jointing Compound
offered by Gyproc as part of the complete M2TECH system
Product Matrix
Width (mm) Length (mm)* Edge Type
12.5mm
1200 2400, 3000 T/E
12.7mm
1200 2400, 3000 T/E
15mm
1200 2400, 3000 T/E
15.9mm
1200 2400, 3000 T/E
1
Gyproc M2TECH is also available in a FireStop, DuraLine, CoreBoard and Activ’Air variant.
2
The boards achieve scores of 10 and 0 as per ASTM D 3273 and ASTM G 21 respectively, the best possible scores for these tests.
Gyproc FireStop
th
Product Matrix
Width (mm) Length (mm)* Edge Type
12.5mm
9mm
1200 2400, 2700, 2800, 3000 T/E
12.7mm
1200 2400, 2700, 2800, 3000 T/E
15mm
1200 2400, 3000 T/E
1220 2440, 3000 T/E
15.9mm
1200 2400, 3000 T/E
1220 2440, 3000 T/E
* other lengths available on request
220 www.gyproc.ae
Gyproc performance plasterboards
ilab
ava le
Gyproc FireStop MR
wi
now
th
Product Characteristics Applications
Gypsum plasterboard with glass fibre and water repellent Used in Gyproc partitions where increased fire protection is
additives in the core. required combined with moisture performance. Can be
Plasterboards
finished using Gyproc Fibre Tape or Gyproc Paper Tape and
Gyproc FireStop MR consists of an aerated gypsum core with
Gyproc Jointing Compound. Suitable for direct decoration.
glass fibre and water repellent additives encased in, and
firmly bonded to, strong paperliners. Gyproc FireStop MR is a
plasterboard that is suitable for drylining internal surfaces.
Product Matrix
Width (mm) Length (mm)* Edge Type
12.5mm
1200 2400, 2700, 2800, 3000 T/E
12.7mm
1200 2400, 2700, 2800, 3000 T/E
15mm
1200 2400, 3000 T/E
1220 2440, 3000 T/E
15.9mm
1200 2400, 3000 T/E
1220 2440, 3000 T/E
* other lengths available on request
Gyproc DuraLine
now
1
th
Product Matrix
Width (mm) Length (mm)* Edge Type
15mm
1200 2400, 3000 T/E
1220 2440, 3000 T/E
www.gyproc.ae 221
Gyproc performance plasterboards
ilab
ava le
wi
now
Gyproc DuraLine MR
th
Product Characteristics Applications
Gyproc DuraLine MR consists of an aerated gypsum core with Designed for use in the Gyproc GypWall systems to give
glass fibre, water repellent and other additives encased in, greater moisture resistance and greater impact resistance in
Plasterboards
and firmly bonded to strong paper liners. Gyproc DuraLine MR heavy use areas.
is a plasterboard that is suitable for drylining internal
surfaces.
Product Matrix
Width (mm) Length (mm)* Edge Type
15mm
1200 2400, 3000 T/E
1220 2440, 3000 T/E
Gyproc CoreBoard
Product Matrix
Width (mm) Length (mm)* Edge Type
19mm
598 3000 S/E
* other lengths available on request
222 www.gyproc.ae
Gyproc specialist boards
NEW
Specialist Board
board that is very dense with a non-porous surface. The wet areas. It can also be used for external soffits in sheltered
excellent moisture resistant characteristics and mechanical positions.
strength of Aquaroc cement board makes it an ideal tile
backer board that can be used in wet areas such as kitchens,
bathrooms, shower areas and even on spa areas.
Product Matrix
Width (mm) Length (mm) Edge Type
6mm
1200 2400 S/E
9mm
1200 2400 S/E
12mm
1200 2400 S/E
15mm
1200 2400 S/E
www.gyproc.ae 223
Metal components
www.gyproc.ae
224
Gypframe metal components
Gypframe metal stands for quality, strength and durability Benefits of Gypframe:
through a range of components that provide the backbone • Galvanised steel that will not warp or rust
for our tested and warranted wall, ceiling, lining and • Easy to cut on site, saving time and creating no mess
encasement systems. • Limited waste - any off-cuts can be recycled
• Self locking studs and channels, that are quick to install
Metal components
The unique manufacturing process, including the patented • Improved screw retention and strip out strength
UltraSteel™ double helix work hardening process, means • Improved resistance to screw pull-out
that Gypframe metal components are: • Lightweight – easy to move around site and build to greater
height
• Precision engineered for premium quality
• Lighter to carry and handle Manufacturing Standards:
• Easier to cut and fit All Gypframe components are rigourously tested to
• Rigidised for extra strength internationally recognised product standards and conform
• Allow enhanced screw fixing and retention to.
• The only metal components to carry the
• SpecSure system performance warranty when • British Standard BS 7364
installed in our proprietary systems • European Standard EN 14195
• American Standard ASTM C645
www.gyproc.ae 225
Bespoke Gypframe Gypframe reference codes and abbreviations
Gyproc offers a comprehensive bespoke service for the To understand a Gypframe metal product, follow these
Gyproc plasterboard and Gypframe metal product ranges. simple steps:
Whether you require a non-standard length, alternative Step 1
gauge or other specification change, we’ll try to provide you The first 2 or 3 digits refer to the component width
with the best solution for your project. Specifying bespoke Step 2
Metal components
metal lengths can speed up construction as there is no need The letter refers to the product type i.e.,
to trim them to the correct length, and will save waste on S = Stud, C = Channel
site, helping with site safety and cost reduction. Step 3
The last two digits indicate the metal thickness or gauge in
For more information contact the customer service centre on mm i.e., 0.50mm
+971 800 GYPROC (497762) See example below
70 I 70
Component width in mm Component type Stud gauge
Example = 70mm Example = 'I' Stud Example = 0.70mm
226 www.gyproc.ae
Gypframe studs and channels
Metal components
widths, lengths and thicknesses depending on requirements range. They allow for increased partition height, without
for strength, height, impact resistance and sound insulation. increasing the partition width, and provide improved impact
Manufactured using patented, UltraSteel™ technology giving resistance. Commonly used in ShaftWall, Gyplyner IWL,
a rigidised surface for additional strength. Service cut-outs GypWall QUIET IWL and other GypWall systems. Service
are also placed along the spine of Gypframe ‘C’ Studs cut-outs are also spaced along the spine of the Gypframe ‘I’
providing easy routing of services through the partition. Stud, providing easy routing of services through a partition.
www.gyproc.ae 227
Gypframe studs, channels and accessories
Gypframe channels are used for securing Gypframe ‘C’ Stud Gypframe MF Ceiling Channels are used for providing a robust
at floor and ceiling junctions. Gypframe Extra Deep Channels false ceiling system. These sections are manufactured using the
(EDC) are used for partition heights over 8000mm or in patented UltraSteel™ process giving a rigidised surface for
situations where deflection head details or improved impact better screw holding and increased tensile strength.
resistance is required. Extra Deep Channels are manufactured
using the patented UltraSteel™ process giving a rigidised
surface for better screw holding and increased tensile
strength.
Fixing Channels
103 FC 50 0.5 2400 GL1 Stud 0.5 3000
103 FC 90 0.9 2400
153 FC 90 0.9 2400 GLB85 Bracket - Box
* - Bespoke lengths available on request ^ - Also available in 0.6, 0.7 and 0.8 thickness
* - Bespoke lengths available on request
228 www.gyproc.ae
Gypframe channels and angles
Metal components
These products are used for the high performance Gypframe steel angles are widely used in framed
ShaftWall system used to create lift shaft and service riser construction to provide support, protection, fixing and
linings that can be constructed from one side and provide additional strength to wall, ceiling and encasement framing.
structural and fire protection applications.
Starter Channels
70 SC 70 3000 GA1 Angle 0.5* 3000
100 SC 80 3000 (Floor and Ceiling Angle)
Retaining Channels
RC 70 3000 GA4 Angle 0.7 3000
RC 100 3000
RC 150 3000 GA6 Splayed Angle 0.5 3000
* - Bespoke lengths available on request * - GA1 Angle is also available in 0.6, 0.7, 0.8, 0.9 and 1.5mm
thickness
www.gyproc.ae 229
Fixings
www.gyproc.ae
230
Gyproc, Gypframe and specialist board fixing products
The Gyproc range of fixing products cater for drywall applications, from simple yet secure fixing of plasterboard linings to
expansion anchors and sophisticated bonded anchor systems for demanding heavyweight fixing applications.
The Gyproc fixings range includes screws engineered for board-to-metal or metal-to-metal fixing; high performance screws
for use with the FireCase encasement system, and special Gypframe fixings for ceiling, lining and floor systems.
Gyproc fixings are designed to deliver optimum performance for all Gyproc systems, and must be specified to ensure
compliance with the SpecSure system warranty.
Fixings
Fixings index
www.gyproc.ae 231
Gyproc fixing products
framing. Supplied with screwdriver bits. framing. Supplied with screwdriver bits.
25 1000 25 1000
35 1000 35 1000
42 1000 42 1000
55 500 55 500
Gyproc Wafer Head Screws Gyproc Jack Point Wafer Head Screws
Product Characteristics Product Characteristics
Corrosion resistant self-tapping zinc plated steel screws with Corrosion resistant self-tapping zinc plated steel screws with
wafer cross-head. Designed for metal-to-metal fixing of light wafer cross-head and self-drilling points. Designed for
gauge steel framing up to 0.79mm thick. Supplied with metal-to-metal fixing of light gauge steel framing 0.8mm
screwdriver bits. thick or greater and ‘I’ studs greater than 0.7mm thick.
Supplied with screwdriver bits.
13 1000 13 1000
232 www.gyproc.ae
Specialist board fixing products
Aquaroc Screws
Product Characteristics
The screws have a unique head design that countersinks
itself into the board allowing easy fixing. Specifically
designed for the fixing of Aquaroc Fibre Cement specialist
board.
Fixings
Manufacturing Standards
European Standard EN14566 - Type A1.
Product Matrix
Length (mm) Box Quantity
30 500
46 500
62 500
www.gyproc.ae 233
Plasterboard accessories
To achieve the high performance requirements of a complete Gyproc system solution, a range of superior quality accessories
are available. This includes performance tapes, high-strength screws and jointing compounds that achieve seamless joints.
Plasterboard accessories
Gyproc deliver the very best tried and tested products that adhere to stringent international standards as well as Gyproc’s
own rigorous product performance assessment.
Gyproc Fibre Tape 236 Gyproc Drywall Metal Corner Bead 237
Gyproc Paper Tape 236 Gyproc Drywall Metal Edge Bead 237
Mold Resistant Fibre Tape 236
www.gyproc.ae 235
Gyproc jointing materials and tapes
Plasterboard accessories
Product Characteristics
M2TECH Fibre Tape is a necessary component of the Gyproc
M2TECH lining system. It is a high strength, self-adhesive,
mold resistant mesh type with an anti-microbial coating that
achieves a score of 10 as per ASTM D 3273, the best possible
score for this test.
Together with Gyproc Moisture and Mold Resistant board,
M2TECH accessories provide the ultimate protection for
at-risk areas and buildings.
Manufacturing Standards
European Standard EN 13963 - Type T
American Standard ASTM D 3273
Product Matrix
Width (mm) Length (m)
50 90
236 www.gyproc.ae
Gyproc miscellaneous accessories
Plasterboard accessories
Product Characteristics Product Characteristics
A soft extruded linear intumescent gap sealer, to maintain An acrylic sealant used for sealing air gaps in Gyproc systems
fire resistance. to maintain optimum acoustic performance.
Product Characteristics
A general purpose gypsum-based adhesive for use when
using the DriLyner system to direct fix plasterboards to brick,
block-work or cementicious backgrounds.
Manufacturing Standards
European Standard EN 14496
Product Matrix
Quantity per Unit
30kg
Gyproc beads
www.gyproc.ae 237
Plasters
Gyproc's GypFine smoothing plasters offer flexible solutions to a range of site needs with a range of products including
GypFine – Board Skim for skimming plasterboard, GypFine – Multi Skim for skimming cement render, fair face concrete and
precast panels and GypFine – Ultra Skim for skimming all surfaces without the need for primers.
Gyproc GypFine’s dedicated formulations provide quality skimming plasters for a comprehensive range of internal surfaces
such as plasterboard, gypsum based plasters, cement renders, pre cast panels and fair faced concrete. These formulations
enable GypFine Plasters to be used in all construction types from high rise offices and apartments to hospitals, schools or
villas. They offer an enhanced level of surface uniformity and visual finish to walls and ceilings that are decorated with
semi-gloss or high-gloss paints and dark colours, or as a base for wall paper and other decorative finishes. In areas exposed
to artificial or critical light the finish provided is flawless.
Plasters
GypFine Plasters
25kg 25kg
Manufacturing Standards
ASTM C587-04 (2009)
EN 13279-1 type B1/20/2
Product Matrix
Quantity per Unit
25kg
www.gyproc.ae 239
Access panels
Gyproc Access Panels are purpose-designed for use in Gyproc framed systems where there is a requirement to access services
for maintenance purposes. Designs are also included for use in masonry backgrounds.
Gyproc Access Panels can be specified in commercial, industrial, public and residential buildings. They are available as wall or
ceiling panels, in either standard or a choice of performance options. Panels are available for use in 60 or 120 minute
fire-rated constructions. The panels are available in a range of standard sizes with a choice of finishes to suit different
applications and with a choice of security locks and catches.
Access panels
Gyproc Fire Rated Access Panels Gyproc Fire Rated Access Panels
(Wall) - 60 Minute (Wall) - 120 Minute
Product Characteristics Product Characteristics
A 60-minute fire rated access panel for application in walls, A 120-minute fire rated access panel for application in walls,
making access to hidden services quick and easy. making access to hidden services quick and easy.
Gyproc Wall Panels comprise of a powder-coated, beaded Gyproc Wall Panels comprise of a powder-coated, beaded
steel frame and metal door. All panels are fitted with a steel frame and metal door. All panels are fitted with a 3
budget lock as standard and are supplied with an open drive point lock.
key.
Product Matrix
Panel Size (mm) Door Type Weight (kg)
235 x 150 Plastic 2.0
300 x 300 Plastic 2.16
www.gyproc.ae 241
Perforated acoustic
gypsum products
www.gyproc.ae
242
Perforated boards, ceiling tiles and planks
Ceilings index
Quattro 55 246
Line 8 246
Base 33 246
Edge details
Gyproc ceiling systems create a new flexibility in design and construction. The wide range of products give fresh and creative
freedom for interior designers, enabling them to fully realise the visual and acoustic ambience of their designs. The products
are available in six edge profiles as shown below:
A E15 E24
D1 E15/A Tapered
www.gyproc.ae 243
Gyptone Boards
Perforated acoustic gypsum products
ilab ilab
ava le ava le
wi
wi
now
now
Activ'Air Quattro 41 Activ'Air Quattro 42
th
th
Product Characteristics Product Characteristics
Achieves high levels of acoustic absorption with a 12mm Good acoustic absorption with a 12mm square cut out
square cut out design giving a total perforated area of 16%. design giving a total perforated area of 10%.
ilab ilab
ava le ava le
wi
wi
now
now
Activ'Air Quattro 43 Activ'Air Quattro 46
th
th
Product Characteristics Product Characteristics
Achieves high levels of acoustic absorption with a 12mm cut Good acoustic absorption with a 12mm square cut out
out design giving a total perforated area of 16%. design giving a total perforated area of 10%.
ilab ilab
ava le ava le
wi
wi
now
now
th
ilab ilab
ava le ava le
wi
wi
now
now
th
244 www.gyproc.ae
Gyptone Curve Boards
wi
now
Activ'Air Curve Board Range
th
Product Characteristics
Gyptone Activ’Air Curve provides the opportunity to create The product range for Gyptone Activ’Air Curve includes 3
curved ceilings with sound absorbing properties. perforated standard patterns – Line 6, Sixto 63 and Quattro
41, all with tapered edges on the long sides.
The large format also enable the possibility to create large
unbroken ceiling surfaces without visible joins. Used Gyptone ceilings can be fully recycled into the
manufacturing of new gypsum products.
Product Matrix
Thickness (mm) Width (mm) Length (mm) Edge Detail
Activ'Air Curve Line 6
6.5 1200 2400 Tapered
Gyptone Tiles
ilab ilab
ava le ava le
wi
wi
now
now
Activ'Air Quattro 20 Activ'Air Quattro 50
th
th
Product Characteristics Product Characteristics
Pre-finished white tile with 9mm square perforations, backed Pre-finished white tile with 12mm square perforations.
by special sound absorbent tissue. A perforated area of 18% Comprises a perforated area of 18%, giving a good level of
provides high levels of acoustic absorption. acoustic absorption performance.
ilab ilab
ava le ava le
wi
wi
now
now
th
ilab ilab
ava le ava le
wi
wi
now
now
th
Product Characteristics
The product range for Gyptone Plank comprises four Gyptone Plank and its supporting sections can be easily
standard patterns based on the Line, Point, Quattro and Base demountable making it a suitable choice for corridors where
pattern types. Plank has recessed long edges and is fixed to easy access to installations is required.
reinforced, exposed T-15 sections without hangers.
The planks have perforations which together with acoustic
backing tissue gives good acoustic properties
Product Matrix
Thickness (mm) Width (mm) Length (mm) Edge Detail
Quattro 55
12.5 300 1800, 2100, 2400 E15/A
Line 8
12.5 300 1800, 2100, 2400 E15/A
Base 33
12.5 300 1800, 2100, 2400 E15/A
Gyptone Trap
Product Characteristics
Trap is a system for hinged corridor ceilings where the tiles The Gyptone Trap components are supplied with the tiles
can be let down on the side of choice. This allows for quick mounted in frames of lacquered steel which can be let down
and easy access to installations behind the tiles. and hung freely with the aid of special hooks. The Trap
components can – with the help of the centre section – also
The product range for Gyptone Trap comprises five standard be used in continuation of each other.
patterns: Trap Line 4, Point 11, Quattro 20, Quattro 50 and
Base. The tiles have perforations which together with the acoustic
backing tissue gives good acoustic properties.
Product Matrix
Width (mm) Length (mm)
Quattro 20
580 1160, 1160-1800
Quattro 50
580 1160, 1160-1800
Point 11
580 1160, 1160-1800
Base
580 1160, 1160-1800
246 www.gyproc.ae
Gyptone INSTANT
Product Characteristics
Gyptone INSTANT acoustic panel solutions are designed for Gyptone INSTANT acoustic panels are very easy to install and
acoustic regulation of existing rooms where lower have a robust surface with high impact resistance. The panel
reverberation times and improved speech intelligibility are comes with pre-painted frame and tiles and can be mounted
required. The panel is suitable for class rooms or office rooms on the wall in 20 minutes. They can be mounted on walls at
and will reduce reverberation time and increase speech any angle and are paintable in any colour or pattern
intelligibility.
Product Matrix
Width (mm) Length (mm)
Quattro 20, Edge B
600 600, 2400, 3600
Line 4, Edge B
600 2400, 3600
www.gyproc.ae 247
Rigitone Boards
Perforated acoustic gypsum products
248 www.gyproc.ae
Perforated acoustic gypsum products
Rigitone 12-20/66 Rigitone 8-15-20 Super
Rigitone 12/25 Q
Product Characteristics
Achieves high levels of acoustic absorption with 12mm
regular square perforations at 25mm c/c distance giving a
total perforated area of 23.0%.
Product Matrix
Width (mm) Length (mm) Edge Detail
12.5mm
1196 2001
www.gyproc.ae 249