Documente Academic
Documente Profesional
Documente Cultură
MOUNTS
AMC MECANOCAUCHO®
V0 (m/s)
V1 (m/s)
V2 (m/s)
V3 (m/s)
MORE THAN 45 YEARS OF EXPERIENCES ENDORSE US
Since 1969 AMC MECANOCAUCHO® has pioneered the manufacture and design of articles for the reduction of integral
vibrations from structures and air-borne noise.
Factory 1
Factory 2
1969 1995
2
ANTI-VIBRATION
MOUNTS
QUALITY
COMMITMENT
ISO 9001:2014 ISO 14001: 2014 Marine type approval NATO certificate
The products commercialised by AMC are all made
in-house. MANAGEMENT SYSTEM
CERTIFICATE
MANAGEMENT SYSTEM
CERTIFICATE
Número de certificado:/Certificate No.: Fecha Inicial de Certificación:/Initial date: Validez:/Valid:
247139-2017-AQ-IBE-ENAC 09 octubre 2002 31 octubre 2017 - 31 octubre 2020
Número de certificado:/Certificate No.: Fecha Inicial de Certificación:/Initial date: Validez:/Valid:
247138-2017-AE-IBE-ENAC 18 noviembre 2014 31 octubre 2017 - 31 octubre 2020
Se certifica que el sistema de gestión de/This is to certify that the management system of
El incumplimiento de las condiciones establecidas en el Contrato puede dar lugar a la cancelación del certificado/
Ana del Rio Salgado
Representante de la dirección/
Management Representative
Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid.
DNV GL BUSINESS ASSURANCE ESPAÑA, SLU, C/ Garrotxa, 6-8, Pl. 3 Of. 1, 08820, El Prat de Llobregat, Barcelona, Spain. TEL:+34 93 479 26 00.
www.dnvgl.es/assurance El incumplimiento de las condiciones establecidas en el Contrato puede dar lugar a la cancelación del certificado/
Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid.
DNV GL BUSINESS ASSURANCE ESPAÑA, SLU, C/ Garrotxa, 6-8, Pl. 3 Of. 1, 08820, El Prat de Llobregat, Barcelona, Spain. TEL:+34 93 479 26 00.
www.dnvgl.es/assurance
Adhesion Test
Extensometer
Rheometer
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 3
THE SOLUTION
Machinery, which by virtue of its design has reciprocating or rotating parts,
creates vibration to some degree through imbalance of the moving parts.
This vibration produced by a machine leads to different FFT analysis of orders for a diesel engine
problems, such as a reduction in the machine’s useful life
through part wear, plus the transmission of this vibration to
other non-insulated adjacent structures, giving rise to pro-
blems of noise and vibration transmission.
Chassis FFT
4 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
ANTI-VIBRATION
MOUNTS
APPLICATIONS
Our products are used in sectors such as:
• Generation of electrical energy
• Air compression
• Pumping of liquids
• Industrial vehicles
• Machine Tools
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 5
ENGINEERING
ENGINEERING
1. Calculation
4. Measurements
figure 3
K (N/m)
M (Kg.)
Fo (Hz)
C (Ns/m)
Zone d’amplification
des vibrations ξ=0,05
Excitation 10
8 ξ=0,1
5 ξ=0,3
Zone d’isolation
des vibrations
T 2 ξ=0,5
Response
1
0,6
0,3
Own Pulsation:
10 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
ANTI-VIBRATION
MOUNTS
If the frequency of excitation is times less the natu- CREEPING AND LONG-TERM BEHAVIOUR
ral frequency, transmissibility is greater than one, then the
force transmitted is greater than the excitation force, there is
magnification of the vibrations. When we work in this area, If an elastomeric element is under a static load, this load pro-
the existing damping in the system is important. The greater duces a progressive increase in deformation.
the latter, the smaller the magnification of the vibrations will
be.
This phenomenon may be important in a wide variety of appli-
cations, from mounts for buildings to engine mounts.
If the frequency of excitation is times greater than the
natural frequency, transmissibility is less than one, or in other
words the force transmitted is less than the force originated in Creeping at a given time t is calculated as:
the system, then we are in the damping area.
• By reducing the stiffness of the anti-vibration mount. And is expressed as a percentage (%) of the initial deforma-
tion. This value depends on the geometry of the mount, and
above all on the way the rubber is worked.
To increase the efficacy of the isolation in the damping area,
it is advisable to have low damping, although weak damping
generates greater displacement when passing through the
resonance, it is advisable to use a damping coefficient T so Creeping
Creeping
that passage through the resonance does not give rise to
inadmissible displacement for the machine. 0,25
DAMPING
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 11
ANTI-VIBRATION
TECHNIQUES
1.-DYNAMIC TESTING MACHINE
Dynamic stiffness can only be established by measurement on a dynamic test bench. Similarly, the damping coefficients of com-
pounds are further values that can be measured with this type of machines.
One concept that must be taken into account when designing an anti-vibration mount is its durability. A dynamic testing
machine allows us to conduct fatigue tests that reproduce the real working conditions of the part so that its useful life can thus
be predicted accurately.
12 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
ANTI-VIBRATION
MOUNTS
GENERAL CHARACTERISTICS
OF ELASTOMERS
NATURAL RUBBER OZONE RESISTANCE
Natural rubber is used in the This characteristic is important for
manufacture of elastomers with high measuring an elastomer’s weather
elasticity and tear strength. It is a stability. The speed at which it may
strong material with excellent abrasion deteriorate depends on the prevailing
resistance. Among all the rubber environment conditions and the
families, natural rubber offers the best formulation of the compound.
resistance to mechanical and dynamic
loads. Natural rubber is not stable
ADHESION
versus non-polar liquids such as mineral
The bond between elastomers and
oils, lubricants, fuels and aliphatic
metals is made by adhesives which
and aromatic and hydrocarbons and
are applied to the metal parts which
chlorides. Its moderate ozone stability
leverage the process of vulcanisation to
can be improved with additives.
create a firm bond between elastomer
and metal.
COMPOUNDS TOLERANCES
An elastomer is not composed of a No part can be manufactured with
single material, but rather contains very absolute precision, the dimensional
varied substances. tolerances of rubber articles are esta-
Mixes can be made with different blished in the ISO 3302 standard. As for
formulations to obtain different physical properties, hardness may vary
stabilities and different mechanical by ± 5 shöre, and stiffness “K” admits
characteristics. a margin of ± 20%. In cases of highly
demanding requirements, this margin
can be reduced to ± 10% thanks to a
HARDNESS highly-sophisticated process.
The hardness of the elastomer depends
on its formulation and is measured by
means of practical units established by
different standards such as shöre (A) or
IRH. AMC Mecanocaucho uses the shöre
scale (A), and manufactures anti-vibration
mounts with hardnesses of between 40
and 75 shöre.
THERMAL STABILITY
Natural rubber based vulcanised
materials are stable within the limits
of – 40ºC to + 80ºC, if the action of the
temperature in question is permanent.
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 13
VIBRATION ISOLATION GRAPH
Deflection
mm.
GRAPH 1
IS
PER OLAT
CE ION
NTA
GE
E
LIN
CE
ION
AN
ISO
LAT
ON
LAT
SO
RES
ION
OI
IN
ZER
dB ISOLATION
SEMI-RIGIDE
NATURAL FREQUENCY (r.p.m.)
FREQUENCY OF EXCITATION
14 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
ANTI-VIBRATION
MOUNTS
HYDRAULIC
BRB BSB BRT MARINE MOUNTS XD MARINE MOUNTS HYDRAULIC CONES
MOUNTS
Page16 Page 18 Page 20 Page 22 Page 24 Page 28 Page 32
NP MOUNTS
Page 73
Static applications:
Engines, generators,
hydraulic pumps and
compressors
GENERATOR TRANSFORMER
FZ SYLOMER® FZM DSD DRD ATP MOUNT IN V MOUNTS
Page 25 Page 27 Page 60 Page 62 Page 68 Page 72 Page 74
Mounts for
Heavy Loads
Ø 20
40
300
190
CORTE A-A
A A
300
Ø 20
40
300
190
CORTE A-A
Levelling machine
mounts
PRODUCTS
NF-NFR SV SV LOW LIST OF
Page 79 Page 80 Page 81
Bushings Elastomeric
Springs
ECCENTRIC ELASTOMERIC
BUSHINGS BUSHINGS SPRINGS
Page 54 Page 84 Page 86
MECANOCAUCHO MECANOCAUCHO
BOBBINS BUFFERS COUPLING TYPE DP
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 15
A A
A C
A A C
A A C
C
B
A
G
G
B
G
B
G
A A A
A
E E EEF FF F
BRB 50
BRB 60
BRB 65
F
F
BRB 50 BRB 50
BRB BRB
70 60
E
BRB 60
E
BRB 65
F
BRB BRB
80 65 BRB 50
F
BRB 70
BRB 50 BRB 70
BRB 60 BRB 80
E
BRB BRB
95 80 BRB 60 BRB 95
BRB 95 BRB 65 BRB 65 BRB 100 BRB 150 S.B.
BRB BRB
110100 BRB 70 BRB 110 BRB 150 S.B. BRB 150 B.Q.
BRB 180
BRB
125110
BRB BRB
BRB 70
BRB 80
BRB 125
BRB 150 BRB 180 D1 BRB 180
BRB 220
BRB 80
BRB BRB
125
150150 BRB 95 D1
BRB 95
BRB 220 D2 BRB 220
D1
BRB 100 D2
BRB 100 D1 D2
BRB 150 S.B.BRB 150 S.B.
BRB 110 BRB 180 BRB 180
BRB 110
D1 D2
BRB 125 BRB 125
BRB 150 D1 BRB 220 BRB 220
BRB 150
D2 D2 D1 D1
BRB Type
A
(mm)
B
(mm)
C D1 D2 E
(mm) (Min.) (Max.) (mm)
F
(mm)
G
(mm)
Weight
(gr.)
Code
135451
D2
Load
(kg)
20
D2
Shore
40 Sh
135453 40 50 Sh
DESCRIPTION BRB 50 50 25 M-8 61 70 85 6,5 2 117
135455 60 60 Sh
The BRB type AMC MECANOCAUCHO ® mounts 135457 80 70 Sh
are antivibration elements which work the rubber 135101 30 40 Sh
in shear and compression. Their tall height section 135405 45 50 Sh
BRB 60 64 35 M-10 76,5 90,5 110 9 2,5 225
produce large deflections, low natural frequencies, 135103 65 60 Sh
and excellent vibration isolation results. This range of 135104 75 70 Sh
135421 50 40 Sh
mounts is suitable for applications where high vibra-
BRB 65 135422 75 50 Sh
tion isolation in the 85-95% range is a priority. 64 35 M-10 76,5 90,5 110 9 2,5 243
M10 135423 120 60 Sh
TECHNICAL CHARACTERISTICS 135424 140 70 Sh
135431 50 40 Sh
• The top metal hood protects the rubber from the BRB 65 135432 75 50 Sh
64 35 M-12 76,5 90,5 110 9 2,5 243
Ozone, UV rays, diesel or oils which damage the M12 135433 120 60 Sh
rubber. 135434 140 70 Sh
135251 50 40 Sh
• The metal parts have a suitable anticorrosive 135252 75 50 Sh
treatment for outdoor applications. RoHs compli- BRB 70 64 35 M-12 100 100 120 11 3 253
135253 120 60 Sh
ant. 135254 140 70 Sh
135231 80 40 Sh
• They have an interlocking metal component that 135232 130 50 Sh
BRB 80
provides a fail-safe protection for mobile appli- M10
83 35 M-10 108 112 135 11 3 398
135233 175 60 Sh
cations. This device limits the ascending vertical 135234 235 70 Sh
movement when the mounting is submitted to 135275 80 40 Sh
shocks at traction. BRB 80 135276 130 50 Sh
83 35 M-12 108 112 135 11 3 398
M12 135277 175 60 Sh
• The mounts are clearly identified, as the base- 135278 235 70 Sh
plates are engraved with the type and hardness, 135771 150 40 Sh
which makes it possible to easily recognise the BRB 95 135772 260 50 Sh
part even after several years of use. M10
92 39 M-10 122 126,6 150 10 3 657
135773 330 60 Sh
135774 390 70 Sh
• The hood has a cross stamped on the top, which
135761 150 40 Sh
enhances its rigidity on mobile applications and
BRB 95 135762 260 50 Sh
also improves the evacuation of oils or liquids M12
92 39 M-12 122 126,6 150 10 3 657
135763 330 60 Sh
that precipitate onto it. 135764 390 70 Sh
APPLICATIONS 135241 200 40 Sh
BRB 110 135242 305 50 Sh
106 41 M-12 137 149 175 13 3 857
This mount is suitable for the isolation of mobile M12 135243 420 60 Sh
rotating machines which are exposed to axial and 135244 450 70 Sh
radial shocks, dripping oil, diesel or exposure to the 135331 200 40 Sh
weather. It is particularly interesting for applications BRB 110 135332 305 50 Sh
106 41 M-16 137 149 175 13 3 857
M16 135333 420 60 Sh
where a high level of vibration isolation is required.
135334 450 70 Sh
135618 350 40 Sh
135620 500 50 Sh
BRB 125 123 48 M-16 154 162 190 14 4 1170
DNV Marine Type approval 135622 700 60 Sh
135624 900 70 Sh
135205 450 40 Sh
Certificate No:
BRB 150 135206 570 50 Sh
156 53,5 M-16 125 132 164 14,5 4 2030
TAM000001H
TYPE APPROVAL CERTIFICATE Revision No:
This is to certify:
135208 1000 70 Sh
That the Flexible Mounts for Propulsion or Auxiliary Machinery
135161 450 40 Sh
Issued to
APLICACIONES MECANICAS DEL CAUCHO, S.A. AMCSA
Asteasu Guipuzkoa, Spain
135162 570 50 Sh
is found to comply with
Det Norske Veritas' Rules for Classification of Ships/High Speed and Light Craft
Application :
BRB 150 156 53,5 M-16 176 188 218 14,5 4 1840
135163 800 60 Sh
Flexible mounts for machinery, including diesel engines.
Product(s) approved by this certificate is/are accepted for installation on all vessels classed
by DNV GL.
135164 1000 70 Sh
135391 875 40 Sh
135392 1200 50 Sh
BRB 180 186 84 M-20 146 150 181 14 5 3800
135393 1700 60 Sh
S.B. = Square Base
135394 2400 70 Sh
Issued at Høvik on 2015-08-05
for DNV GL
DNV GL local station: Bilbao
Digitally Signed By: Nguyen, Tin Huu
Location: DNV GL Høvik, Norway
Approval Engineer: Øyvind Stokkebekk Eriksen Signing Date: 2015-08-06, on behalf of
Oddvar Deinboll
Head of Section
This Certificate is subject to terms and conditions overleaf. Any significant change in design or construction may render this Certificate invalid.
135201 1600 40 Sh
The validity date relates to the Type Approval Certificate and not to the approval of equipment/systems installed.
135200 2400 50 Sh
BRB 220 230 105 M-24 180 180 220 19 6 6716
Form code: TA 1411a Revision: 2015-05 www.dnvgl.com Page 1 of 2
© DNV GL 2014. DNV GL and the Horizon Graphic are trademarks of DNV GL AS.
135202 3400 60 Sh
135203 4200 70 Sh
16 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
ANTI-VIBRATION
MOUNTS
NATURAL
NATURAL FREQUENCY
FREQUENCY AMC LOAD DEFLECTION
LOAD DEFLECTION GRAPH
GRAPH GRAPH
NATURAL FREQUENCY AMC LOAD DEFLECTION
AMC MECANOCAUCHO
MECANOCAUCHO®
®
BRB
BRB 45-95
MECANOCAUCHO® BRB50-95
45-95TYPE
TYPE TYPE AMC AMC MECANOCAUCHO
MECANOCAUCHO®
AMC BRB
MECANOCAUCHO®
®
45-95 BRB 50-95TYPE
TYPE
BRB 45-95 TYPE
NATURALNATURAL
FREQUENCY
FREQUENCY
AMC AMC LOAD DEFLECTION
LOAD DEFLECTION
GRAPH GRAPH
390 390 390
MECANOCAUCHO®
390
MECANOCAUCHO®
BRB
B
R
B
45-95
BRB
B TYPE
R 45-95 TYPE AMC MECANOCAUCHO®
AMC MECANOCAUCHO®
70 BRB 45-95
70
BRB
TYPE
45-95 TYPE
B B 95
390 390 R B
R B 95 9 390 390
B 95 60 60
B B R 7 B 57 B 5
9 0 R 0 300 BR 70 BR B 95 70 5095 50
B 95 6B 9
300 300
300 B 56 B
95 95B 5
R 0 R 0 5 95 BRB 9 60 BBR 60 B 9
B B B B
95 70 70 RB BR B 9 B
5 R 5B095 BR
300
250 300 RB 95 R B 300
250 300
250 B 50
250 95 60 9 60 0 95R70 95
5 BR0 7 B
BBR 5
R B 0
B
R
B
B RR 5
0
B
R 8 B RB 80 B RB
250 250 B B
B B 89 B 250 250 B B
200 89 8 8 200 200 BR 70 BR 70
B 200 B B0565 BBR0 605 75 B 07 80 60 80
R R R 00 R B 0 00 R 0
B 60
B B B B B 80 RB 80
200 95200 8
B B0 5 9 B 88
00 7
80 200 200 BR B B B
B
R 4 0 R
B R6B0 40 R 600 70 BR 6060 BR 600
150 B
150 65 9
B
B
150 150 0
8 -7 0 800 6
95 6 B 40 40 RB5-7
B 40 B -7 5
R 4 R
5
B -7 B R R
B 0 9 5 0BRB65 0 5 6
R150 B
BR 6 0 0 B 0 6 65 7 B 0 7 RB 69 B B 60
B 65-
150 B 150 150 0 0B 0
80 6B5 0 65 B 0 R -7 -7 BR5-7 B 40 055B-07R BR 40 550-7
B
8
B-700 5 -7 B 0
7
R 70
B 7 65 0 6 9 5 0 86 9 5 806
R 5 R 60 0 B 7 B B 0 7RBB B BRB
0 60 65 0 65 0
BR 0
BB 8 B 80
B -7 -7 100 -7 BR BR5-7 BBR 50BR BRB 50
100 100 B0 R R 0
B B 0
7 B
0
70
100 65 6 80 80
5
650 5 R 0 R B B B B
65 0 B B BR BR R R
B - B B B
100 B 100RB 70 B BR RB -70 B 60
B 076 100 100
40 0 40
80 R
80 5 R
65 0 B B 65 0R 5
B R B
R 7 R 80 80 70 60 70 800
B B B B0 R B 0 50 50 0 0 6 80
8 - 8 6 - B
B 0 4 70 BB B0 R4 0 6 70 50 BR 0 660 B 5
6 60 70 RB 00 B 6B 560 RB0 5 B 60060 RB
70 70 70 7080 - 7
7 0 7
5700 R R5 60B57- 0 BR 0540 60B 40
80 R80 0
B
50 RRB 0B 0 B50 7 B 0 70B 0 70 80 60 B
066 BRB B0 0 60 80 80
860 B 8 6B R 0 6 R 70 B
RRB5B B0705 B 6RBB650 RBB R0B5 60 60 RB
6070 60B70 5-4 B 650 0R6 B 5 B0
R 6
B
5
6070 6070 BR 70 R BBB - 7 BR 0 B - 7 B 0 B
R 700 R -7400 B05 0
7
B0
5
0
70 60 B 6560 BRBB5 65 BRB 5
B B 4B 0 B BB B
5060 6 40 65 0R 60 0 B 06
R 0 5060 5060 BR BR BR40 BR B R 0 BR
5060 5-7 B
Load (Kg.)
(Kg) (Kg.)
-7 BB B 0 4
0 R 0 R50 50 7 0 0
- 5 -7 50
(Kg) (Kg)
40 B 40 B 6
(Kg) (Kg)
65 60 0
Load (Kg)
Load (Kg)
6 5
50 50 6 60 0 50 50 B B 4 RB
6 60 40
40 BB 05 B 05 40 40 BR BR-70 5B 00 BRB-70 500
LoadLoad
40 RR 0 BRB 0
LoadLoad
LoadLoad
65 6500 5
Load (Kg)
BB
605
R
B60 65 6005
B B B 5
40 40 B 5005 B 50550
40 40
BR BBRR
B R RBB
R R 0 5B0 BBR 50
B B 0 BR B 30 40 50 0
30 30 R
B 5 B 50 30
0 B 40B 5
60 0 5 6R 6 0R
6 50 B B B B
B 0 B 04
2530 2530 R
B 0
4 R 0 2530 2530 BR 40 BR 40
BB B 60 6600 60
60 6R0B R 45 45
40 4405 B
4 25 25 B BBRB B RB
25
20
25 B
R B B 6 B 56 20 20 BR 60 BR 60
20 R RB 0 R 0 45 5
B B B
B 50 40 4 40
50 5 4 45 0 B 0 0
20 20
B
R 40
B
R BR 40 60BR
0 5
60 20 20 BR 45 B 5 BR 45 5 B 5
B B B B B B R 4 B0 BR 40
15
50 45 50 45 15 15 BR 50 5B0R 50 50
15 40 BR 50 40 BR 50 45 B 45 B
B B
R B BR R B BR
4 45 B B
B 5 50
15 15 B 15 15
R
B R 50 40 40
4
B 45 45
4 B
B 54 B 54 R B
10 R
B 0 R
B 0 10 10 B 40 BR 40
10
45 45 45 45
B B
10 10
40 40 10 10 BR BR
8 8 8 8
8 8 8 8
6 6 6 6
56 56 56 56
5 5 5 5
4 4 4 4
7 8 7 9 810 191 12
10 1114 12 16 14 18 120
6 18 20 1 1 1,5 21,5 2 3 43 5 4 57 7
4 4 4 4
Natural
NaturalFrequency
Natural(Hz)
FrequencyFrequency
(Hz) (Hz)
7 8 7 9 8
10 11
9 1210 1114 12 16 14 18 20
16 18 20 1 1 1,5 2 1,5 2 3 Deflection
43 (mm)
5 4 75 7
NATURAL FREQUENCY
Natural
NATURAL AMC
Frequency
Natural(Hz)
FREQUENCY Frequency
AMC (Hz) LOAD DEFLECTION GRAPH GRAPH
LOAD DEFLECTION
NATURAL
NATURAL
FREQUENCY
MECANOCAUCHO®
MECANOCAUCHO®
NATURAL
FREQUENCY BRBAMC110-220
FREQUENCY BRBAMC TYPE TYPE
110-220 AMC
LOAD
LOAD
AMC DEFLECTION
MECANOCAUCHO® GRAPH
BRB
MECANOCAUCHO®
DEFLECTION
LOAD DEFLECTION
GRAPH 110-220
GRAPH TYPE TYPE
BRB 110-220
5000 5000 MECANOCAUCHO® BRB 110-220 TYPE
AMC
MECANOCAUCHO®
MECANOCAUCHO® BRB 110-220 BRB 110-220
TYPE TYPE
5000 5000 AMC MECANOCAUCHO
AMC MECANOCAUCHO®
AMC MECANOCAUCHO®
®
BRB
BRB110-220
BRB 110-220 TYPE TYPE
110-220 TYPE
BR 220 0 70 6 70
BR 22 20 0 6 70
B
4000
B
R B
22 20
2 22 0
B R
0
B R
22
B 6 00
2
3500
22 B 0 60 20RBB BBR
3500 3500
22 B 0 60220 B BR 50
3500
70 BRBR B
70 50R R B
7
4000 4000
0 22
4000 4000
BR
B
0 2
0 0 B B 5B0R
B
R B
70 0
50
R B
70 20
22 0
22 0
R B B
3000
B R
3000
BR B B
3000
B R
3000
2
6
0
50
B
70 R
70
2500 2500
B
3000 3000
2500 3000 3000
2500 0
B
22
B
B
R B 6 0
B
0
R
720 B 26200 B RB
B
B BR 600 80 70
18
R
60 118 RBB
60 80
B0R
22 B
2000 2000
22 B
2000
0
2000
B0 B 0 6B
18 B
18 0
B
6
0 22
7
0 2
BR
800 18
R
R
0
0
50 0BR
40
0
RB 80
50 20
8
18
1
7 0
0
4B0 1
2000 2000
70 80
2000 2000
B
620
B
18
B
R
1
B
02
70 BR
1500 1500
B
1500
40
1500
5
R B B
B50 B 0 BR1B
18
8
0B BR BR B BRRB
BR60 BR RB5 BB 0 BR
6
60
B R R
70
0
0
80 R 0 5 RB
22 B B BR RB BR BR B
40 22
22 B B B15 B 1 B
0 BR
0 22 1 B 1 B
B B 018 1R50B
80 B
0
40 0 80 1 80 1 B 1 RB RB BR
15
B
4
R
5
B
0 0 0 10 0 60 1
R BBR 125 B
B 15 5B0 25 5B 60BR 70
RB
B BR
18
18 15 0
B R B B 6 12
2
B
B B
12 B 1 0RB6006 5 6 50 5100 1
R
1000
12 B 1 R 0 5
1000
0
B
0
R
0 B
1000 1000
1
0B
B
40 5 80 4 80
40 50 80 40 80 050 B0 5610 10 11 RB
12 15
B
B RBBR BR RB 1B2B 1
40
5 1250 150 0
5 1 50 B 1
R 0 6B2155 12 50 011 R 50
8
80
B RB 25 12 5 60
70 5 7 0B
B
15 B1 B
B1R
70 25 7 5
R 60 RB
B
R
0
B
B
70
B
R B
1
0
18
5
0
BR110 R12B 60 5 7
B R
B
BR B B 1RB 12
800
5
B
12
0
B
BR
700
70
6
BR
8
70
50
50 0
50 BR 40
50
700 700
0
700 700
R
BR
15
11 4 R 7 0 1
B
R B RB 01
800 800
5
5
B
800 800
1
B
0
0
R BB
12
B0 50 B11 0 4 R5B 0
0 0
0 B BR B 0RB 6
B6
B
7R0B B
70
600
B
B 0
0 0
B
60
700 700
1
B5
700 700
4
1
BR
15 15
5
1
R
40
12 B
B 1
0B B11R51 B R
0
B
R
RR5B B25
5
RB B
BB
5 1
51 0 1 B B
500
B
B
500
BRBR
600 600
500 600 600
500
50 1
40
50 25
B
7
0
R
40 50
0
5
510
0
40 050 6 0 1
5
5
R
50 1
5600 10
1
B
12
(Kg) (Kg)
500 500
B
(Kg) (Kg)
500 500
2
50
Load (Kg)
R BBR
Load (Kg)
0 B
400
R B
400
BRB
B
400 400
B
B RB B
5
11 R
11 BR
B R
50
B
B0R
650
0
40
40B 0 50 10
B B
11 B 1 R
BR
BRB
6
11 B
4025
5 11 4101205
0
11 B
60
0 1125 B
LoadLoad
LoadLoad
Load (Kg)
0 1
(Kg)
101
R
Load (Kg.)
(Kg.)
51
400 400
1
50
400 400
70 0 4 12
6R0B
0
70 10
B R 0
5
12 B
BBR 12RRBB
6R0
B
5
5
12 B
300
BBR
40 0B
300
0
300
0B
R
300
B1
11
B BB
B
5
11
40 1
11
Load
40
4
0 RB
4R0B
700 5
70
0
BR
B
BR
B
12B
RB
Load
5
50
5
R B
250 250
1
R
300 300
250
11 B
11 B
12
300 300
250
2
B R
0
B BR
B
5
B
11 B
11 B
40
40
BR
BR
40
40
B
0 11
B
0 1
250 250
BR
250 250
BR
40 0
200 200
40 10
200
0
200
11
11
B
B
BR
BR
40
40
100
80 100 100
80 100
80 80
70 70 70 70
80 80 80 80
60 6070 60 6070
70 70
5060 5060 5060 5060
40 40 40 40
30 30 30 30
Natural Frequency
Natural Natural(Hz)
Frequency Frequency
(Hz) (Hz) Deflection (mm)
Deflection
Deflection(mm)
(mm)
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 17
BSB
DESCRIPTION
The BSB type AMC MECANOCAUCHO® mounts are antivibra-
tion elements which work the rubber in shear and compression
with an optimal ratio of stiffness and horizontal stability. These
mounts are really interesting when stability is a priority in an
antivibration suspension.
In applications where the degree of isolation is a priority, we
must choose the BRB-type range of AMC MECANOCAUCHO®
antivibration mounts.
TECHNICAL CHARACTERISTICS
A B C D1 D2 E F G Weight Load
• The top metal hood protects the rubber from the Ozone, Type Code Shore
(mm) (mm) (mm) (Min.) (Max.) (mm) (mm) (mm) (gr.) (kg)
UV rays, diesel or oils which may cause major damage to the 135106 70 40 Sh
rubber. 135109 130 50 Sh
BSB 60 64 34 M-10 76,5 90,5 110 9 2,5 235
135107 170 60 Sh
• The metal parts have a suitable anticorrosive treatment for 135108 245 70 Sh
outdoor applications. RoHs compliant. 135261 110 40 Sh
BSB 80 135262 160 50 Sh
• They have an interlocking metal component that provides a 78 31 M-10 108,2 111,2 130 9,2 3 355
M10 135263 230 60 Sh
fail-safe protection for mobile applications. This device limits
135264 300 70 Sh
the ascending vertical movement when the mounting is sub-
135265 110 40 Sh
mitted to shocks at traction. 135266 160 50 Sh
BSB 80
78 31 M-12 108,2 111,2 130 9,2 3 351
M12 135267 230 60 Sh
• The mounts are clearly identified, as the baseplates are
135268 300 70 Sh
engraved with the type and hardness, which makes it pos-
135311 180 40 Sh
sible to easily recognise the part even after several years of
BSB 95 135312 230 50 Sh
use. M10
92 34 M-10 122 126,4 150 10 3 488
135313 270 60 Sh
• The hood has a cross stamped on the top, which enhances 135314 330 70 Sh
its stiffness on mobile applications and also improves the 135315 180 40 Sh
evacuation of oils or liquids that splash onto it. BSB 95 135316 230 50 Sh
92 34 M-12 122 126,4 150 10 3 488
M12 135317 270 60 Sh
APPLICATIONS 135318 330 70 Sh
135335 250 40 Sh
In mobile rotating machines that require control of movements BSB 110 135336 350 50 Sh
and reasonable values of vibrations and noise, such as: 106 37 M-12 137 150 175 13 3 785
M12 135337 450 60 Sh
135338 550 70 Sh
Pumps, Marine-Land auxiliary units, Industrial Vehicles, 135150 250 40 Sh
Compressors, Ventilators... BSB 110 135151 350 50 Sh
106 37 M-16 137 150 175 13 3 785
M16 135152 450 60 Sh
This mount is suitable for the isolation of mobile rotating
135153 550 70 Sh
machines which are exposed to axial and radial shocks, dripping
135351 450 40 Sh
oil or diesel or exposure to the weather.
135352 550 50 Sh
BSB 125 123 43 M-16 154 162 190 14 4 1109
135353 690 60 Sh
135354 900 70 Sh
135371 750 40 Sh
DNV Marine Type approval BSB 150 135372 950 50 Sh
156 49 M-16 125 132 164 14,5 4 2060
B.C. 135373 1300 60 Sh
135374 1650 70 Sh
TYPE APPROVAL CERTIFICATE
Certificate No:
TAM000001H
Revision No:
1
135361 750 40 Sh
135362 950 50 Sh
BSB 150 156 49 M-16 176 188 218 14,5 4 1818
This is to certify:
That the Flexible Mounts for Propulsion or Auxiliary Machinery
Issued to
135363 1300 60 Sh
135364 1650 70 Sh
APLICACIONES MECANICAS DEL CAUCHO, S.A. AMCSA
Asteasu Guipuzkoa, Spain
135381
Det Norske Veritas' Rules for Classification of Ships/High Speed and Light Craft
Application :
900 40 Sh
Flexible mounts for machinery, including diesel engines.
Product(s) approved by this certificate is/are accepted for installation on all vessels classed
by DNV GL. 135382 1200 50 Sh
BSB 160 156 57 M-20 140 140 170 14,5 4 2200
135383 1600 60 Sh
135384 2300 70 Sh
135181 1300 40 Sh
S.B. = Square Base
135184 1750 50 Sh
BSB 180 180 67 M-20 149 163 192 14,5 4 3800
This Certificate is valid until 2019-08-04.
Issued at Høvik on 2015-08-05
135182 2100 60 Sh
for DNV GL
A A
DNV GL local station: Bilbao
Digitally Signed By: Nguyen, Tin Huu
Location: DNV GL Høvik, Norway
Approval Engineer: Øyvind Stokkebekk Eriksen Signing Date: 2015-08-06, on behalf of
Oddvar Deinboll
Head of Section
This Certificate is subject to terms and conditions overleaf. Any significant change in design or construction may render this Certificate invalid.
The validity date relates to the Type Approval Certificate and not to the approval of equipment/systems installed.
135183 2900 70 Sh
Form code: TA 1411a Revision: 2015-05
© DNV GL 2014. DNV GL and the Horizon Graphic are trademarks of DNV GL AS.
www.dnvgl.com Page 1 of 2
A A 135301
CC 2500 40 Sh
135302 3200 50 Sh
BSB 220 230 105 M-24 180 180 220 19 6 6716
135303 4000 60 Sh
B
B
135304 5000 70 Sh
G
G
A A E
E
A A F
F
C C
A A
F
BSB 60
F
BSB 80
B
B
BSB 60
G
BSB 95
G
BSB 80
BSB 110
BSBBSB
95 60125
BSB
BSBBSB
110
BSB
80150 BSB 150 S.B.
A A BSBBSB
12595 D1 BSBBSB
150160
S.B.
E E BSB 150
BSB 110 D2
BSB
BSB 150
160
BSB 180 S.B.
D1 BSB
BSBBSB160
180220
BSB 125 BSB 180 D1
F BSB 150 D2 BSB 220
F BSB 220 D2
D1
D2
18 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
F
F
BSB 60 BSB 60
ANTI-VIBRATION
MOUNTS
B 0
400 11 60 05
0 400 11
Carga (Kg)
0
Load (Kg.)
5 7 B
BS 0 S
Carico
B BS 80 B 0
95 BS B 70 B 56
300 BS B 95 300 95 BS 0 B9
Load
60 7 0
B 80 70 B 60 B S 50 0 4
60 70 BS B 95 1
250 BS BS BS 70 250 BS S B B1
B B B B S
B BS 95
11 B 50
80 60 0 40
200 0
40 60 60 200 80 0 60 6 95
BS B 5 B
B 60 BS 80 SB BS
95 B B
40 BS
150 150
BS
B 50
60 60
50 B
BS BS
100 B 100 4 0
80
40 80
B
80 80 BS
40
70 BS BS 70 60
B
60
B
60
B
80 60 BS
40 50
50 50
40 40
30 30
25 25
20 20
6 7 8 9 10 11 12 14 16 18 20 1 2 3 4 5 6 7 8 10
Frequenza
Natural propria
Frequency Hz
(Hz) Flecha (mm)
Deflection (mm)
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 19
BRT
DESCRIPTION
AMC MECANOCAUCHO® BRT engine mounts are antivibration ele-
ments which work the rubber in shear and compression with an opti-
mal ratio of stiffness and horizontal stability. These engine mounts
are really applicable as stabilizers of electrical cabinets or racks.
Thanks to the robust fail safe architecture it is usefull In applications
where the box type assembly is submitted to shocks.
TECHNICAL CHARACTERISTICS
• The top metal hood protects the rubber from the Ozone, UV rays,
diesel or oils which may cause major damage to the rubber.
• The metal parts have a suitable anticorrosive treatment for
outdoor applications. RoHs compliant.
• They have an interlocking metal component that provides a fail-
safe protection for mobile applications. This device limits vertical
movement when the mounting is submitted to shock inputs.
• The mounts are clearly identified, as the baseplates are engraved
with the type and hardness, which makes it possible to easily
recognise the part even after several years of use.
• The hood has a cross stamped on the top, which enhances its stif-
fness on mobile applications and also improves the evacuation of
oils or liquids that splash onto it.
APPLICATIONS
LOAD DEFLECTION GRAPH
This mount is suitable for mobile boxes or racks that require greater AMC MECANOCAUCHO® BRT TYPE
control of movement due to axial and radial shock inputs providing
reasonable values of vibration and noise attentuation, such as:
Electrical cabinets, Pumps, Marine-Land auxiliary units, Industrial
Vehicles, Compressors, Ventilators…
This mount is suitable for the isolation of mobile rotating machines
which are exposed to axial and radial shocks, dripping oil or diesel or
exposure to weathering.
Load (Kg.)
135807 M-10
Deflection (mm)
20 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
ANTI-VIBRATION
MOUNTS
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 21
MARINE
MOUNTS
DESCRIPTION
The Marine-type AMC MECANOCAUCHO® mounts are ideal for
mobile applications thanks to their rugged architecture.
Their special design offers different stiffnesses on the three axes,
they are antivibration mounts with great vertical elasticity, great lon-
gitudinal stiffness and optimal lateral stiffness to offer extra isolation
on this axis.
TECHNICAL CHARACTERISTICS
• The top part of the hood has a cross-shaped stamp, which
improves its stiffness in mobile applications and also improves the
evacuation of oils or liquid which splash onto it.
Stiffness rates per axis.
• The metal parts have an anticorrosive treatment which is suitable
for outdoor applications. RoHs compliant. 1
• The mounts are clearly identified, as the bases are engraved with 2,5
the type and hardness.
• They have an interlocking metal component that provides a fail-
safe protection for mobile applications. This device limits the
ascending vertical movement when the mounting is submitted to
shocks at traction.
• The top part protects the elastomer inside from possible dripping
oil, diesel, ozone and ultraviolet emissions that may cause major
damage to the rubber.
• The different stiffnesses for each axis make it possible to offer
major flexibility in the direction perpendicular to the crankshaft/
shaft of the motor. This provides more effective isolation from 0,75
vibrations of all types of engines.
• F o r m a r i n e e n g i n e a p p l i c a t i o n s , c o n t a c t t h e A M C - M
MECANOCAUCHO® technical department.
APPLICATIONS
In mobile rotating machines that need a major isolation capacity
B
from vibrations and noises, such as:
F
• Pumps
• Marine-Land units
A A
• Mobile electrical panels
• Industrial vehicles M G J
• Compressors
• Ventilators
B
• Marine Propellers
G
C
F
A A A
190
D
G J 270 XL
DNV Marine Type approval
2
Ø2
B
G
C
M12
F
A A
135
190
A A
Drawing Marine XL
22 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
ANTI-VIBRATION
MOUNTS
136001 35 40 Sh
136002 45 45 Sh
SMALL 120 40 60 100 14 11 14 11 M-12 397 136003 70 55 Sh
136004 95 65 Sh
136005 110 75 Sh
136021 95 35 Sh
136022 120 45 Sh
MEDIUM 184 50 75 140 30 13 13 22 M-16 857 136023 220 55 Sh
136024 280 65 Sh
136025 400 75 Sh
136041 350 45 Sh
136042 525 55 Sh
LARGE 228 68 112 182 34 18 18 26 M-20 2250
136043 800 65 Sh
136044 1080 75 Sh
136061 950 40 Sh
136062 1400 50 Sh
XL 330 112 190 270 - - - - M-24 9600
136063 2200 60 Sh
136064 3000 70 Sh
Load (Kg.)
ar M
Carga (Kg)
M in 200 m
200 ed
iu
e
D6 diu
m 5 Me
M 5 5
ar
150 in 150 E7 B4
M
e
C r ine r ine
ed 55 Ma Ma
iu all m
m Sm
Sm diu
M al M e 35
eA
100 M ar lM 100
ed
iu
in
e Sm ar D 65 rin
m B4 al in e M a
M 5 lM e rin m
80 ar ar
E7 80 Ma diu
in
e
Sm in 5
70 m all Me
70 A3 al e S
lM D 55
5 65
60 ar
in
60 eC
e arin
C M
50 55 50 all 5
Sm Sm B4
al ine
40 lM 40 M ar
ar all 0
Sm in
e Sm A4
al B4
30 r ine
30 lM 5 Ma
ar
in all
25 e 25 Sm
A4
0
20 20
15 15
10 10
5 6 7 8 9 10 11 12 13 14 16 18 20 1 1,5 2 3 4 5 6 8 10
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 23
EW N
Soportes
MARINE MOUNT Antivibratorios Caucho-Metal
TYPE XD SOPORTE MARINO XD
DESCRIPTION
PROPIEDADES ELÁSTICAS
The XD Marine type AMC-MECANOCAUCHO® mounts are ideal for
mobile applications where a higher degree of isolation is required.
Its specific design allows lower vertical and radial stiffness rates. LOAD DEFLECTION GRAPH
NATURAL FREQUENCY LOAD DEFLECTION CURVE
This feature is particularly useful on those applications
Marinewhere a high AMC MECANOCAUCHO
MECANOCAUCHO®MARINE MOUNTXD TYPE XD
®
MECANOCAUCHO® mount XD Marine mount
vibration isolation rate
100
is required even if the machine runs at low idle
100
speeds. The metal parts are robust and incorporate a fail-safe device
XD
70
in order to resist traction forces. XD
70
80 80
XD
70 70
TECHNICAL CHARACTERISTICS 60
60
60 60 XD
• The cast aluminum bell has been designed to withstand to great 50
XD
50 50 XD
dynamic shocks while the rubber compound is guided in order to
50
XD
• The rubberized baseplate and the aluminum top cap provide a
40
30 30
higher resistance to marine corrosive environments, improving the
Load (Kg)
(Kg)
performance of traditional marine antivibration mounts.
(Kg.)
LoadLoad
• The mounts have
20 a clear identification of rubber hardness on the 20
baseplate.
• The rubber compound is protected against oil contamination, O3
and UV rays.
• The failsafe device
10 avoids rubber working at traction and limits the 10
Deflection (mm)
• The higher longitudinal stiffness allows
Naturalthe mount
Frequency (Hz)to withstand Deflection (mm)
thrust forces. This feature provides stability and reduces lon-
gitudinal movements of the engine. For marine application
installations, please contact the technical department of AMC- A SECTION A-A
SECTION A-A
M16x1,5
MECANOCAUCHO®.
• Maximum leveling: 3 mm. For further leveling, we recommend to
use shims.
APPLICATIONS
100
11
70
• Industrial vehicles
HEIGHT
40 Sh 40 136151
30,6
50 Sh 60 136152
11 11
83 83
HEIGHT
SOPORTE MARINO XD
3 3 30,6
60 60
• Compressors
60 Sh 75 136153
MINIMUM
70 Sh 100 136154
MINIMUM
• Fans
91
121
91
121
Weight
Type Code Shore LOAD kg MAX
(gr.)
136151 40 Sh 40
Con el objeto de adaptar sus productos al estado de la técnica, AMC S.A. se reserva el derecho de modificar sin previa notificación la concepción y realización de los materiales presentados en este
catálogo.
136152 50 Sh 60
MARINE MOUNT
655
type XD
136153 60 Sh 75
136154 70 Sh 100
24 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
Con el objeto de adaptar sus productos al estado de la técnica, AMC S.A. se reserva el derecho de modificar sin previa notificación la concepción y realización de los materiales presentados en este
ANTI-VIBRATION
MOUNTS
FZ+SYLOMER®
MOUNTS
DESCRIPTION
The AMC MECANOCAUCHO ® FZ mounts use high resiliency
Sylomer® polyurethane compounds. The internal architecture of the
mount is composed of two metal parts surrounded by the elastic
compound. The exterior metallic armor incorporates 4 holes for the
fixation of the mount to the frame. The interior metal part consists
of a machined metal ring that transfers the traction and compression
loads to the elastomer. This machined metal ring has a wider diam-
eter than the exterior metal armor acting as a failsafe device.
TECHNICAL CHARACTERISTICS
• The AMC-MECANOCAUCHO FZ mounts incorporate an inter-
locking metal component that provide a fail-safe protection
for mobile applications. This device limits the ascending vertical
movement when the mounting is submitted to shocks at traction.
• The thickness of the metal parts are robust and are suitable for
off-road applications.The metal parts have a suitable anticorrosive
treatment for outdoor applications.
• The Sylomer® polyurethane compound is oil resistant and the
temperature range of the FZ mounts is -30˚C to +70˚C.
APPLICATIONS
The AMC MECANOCAUCHO ® FZ mounts have been primarily
designed for static applications.
They are often used for the isolation of sensitive equipment
embarqued on vehicles submitted to shocks.
ØD
K
H 4 x ØE
A
F
I
A A
C
G
SECTION A-A
ØD
K
H 4 x ØE
I
A
C
G
SECTION A-A
A-A SECTION
Example of installation on a HVAC equipment
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 25
Type A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm) H (mm) I (mm) K (mm) Load (kg) Weight (gr.) Code
FZ-400-51-M14 + LEV KIT 155 94 80 65 12,5 125 22 14 27,5 60 460-800 2461 176331
FZ-400-57-M16 + LEV KIT 155 94 80 65 12,5 125 22 16 27,5 60 800-1000 2461 176341
DYNAMIC CURVES
NATURAL FREQUENCY LOAD DEFLECTION GRAPH CURVE
LOAD DEFLECTION
AMC MECANOCAUCHO
FZ + Sylomer®
®
FZ + Sylomer®
Mounts AMC MECANOCAUCHO ®
FZ + Sylomer®
Support FZ + Sylomer®
2000 FZ 2000
FZ -10 20
1500 00 20 16
-4
00 57 1500 5 7M 7 M 57 M
M2 00 0 5
1200 57 1200 10 60 40
0
0 FZ FZ
1000 M
16 1000 FZ 18
800 800 1M
0 05
650 FZ FZ 6 14
-2 -4
650 FZ 1M
00 00 0 5
500 57 51 500 40
M M FZ FZ
400 12 14 -6 400
FZ 00 12
300 -10 57 300 57M
05 M 0
20
Load (Kg)
250 1M 20 250
F FZ 12
Load (Kg.)
Load (Kg.)
12 Z-2
1M
Load
200 FZ 00 200 5
-10 51 FZ 20
0 12
04 M1
2 -6 150 FZ 5 1M
150 5M 00 0 2
12 51 10 M1
M FZ 45
18 0
100 100 10
FZ 51
80 80 50
FZ
60 FZ 60
-50 50
50 51 45
M 40 50
40 10 FZ
FZ
-50 30
30 4 5M 25
25 10
20 20
7 8 10 12 15 20 1 1,5 2 3 5 7 10
Natural Deflection mm
NaturalFrequency (Hz.)
Frequency Deflection (mm)
26 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
ANTI-VIBRATION
MOUNTS
FZM
DESCRIPTION
The AMC-MECANOCAUCHO® type FZM mounts are ideal for
NEW
mobile applications where high temperatures upto 300º C are
present.
Its specific design allows very similar traction and compression stiff-
ness rates. This feature is particularly useful on those applications
where vibration in the vertical sense is predominant. The metal
parts are robust and incorporate a fail-safe device in order to resist
traction forces.
TECHNICAL CHARACTERISTICS Rubber Metal antivibration mounts
The cast aluminum bell has been designed to withstand to great
AMC-MECANOCAUCHO TYPE FZM WIRE MESH
dynamic shocks while the stainless steel wire fits tight to avoid
relative displacements.
MOUNT
The stainless steel wire mesh and the aluminum top cap provide a
higher resistance to marine corrosive environments, improving the
performance of traditional marine antivibration mounts. The fail-
safe device limits the verticalELASTICAL
ascendant PROPERTIES
movement. The damping
properties of the stainless steel wire mesh allows low amplification
to resonance allowing stable suspended elements.
APPLICATIONS AMC NATURAL FREQUENCIES LOAD DEFLECTION GRAPH
AMC LOAD DEFLECTION GRAPHS
The AMC-MECANOCAUCHO® type 300FZM metallic mount is used
MECANOCAUCHO® FZM AMC MECANOCAUCHO
MECANOCAUCHO® FZM ®
FZM
300
for applications exposed to high temperatures or mobile applica-
tions , for example mounting on board equipment in ships, rail,
road transport such as engines, pumps, generator sets or pipe
8
250 250
02
0-
work or exhaust.
10
M
FZ
200 200
FZ
M
3
10
02
0 -0
0-
10
28
M
FZ
150 150
FZ
M
10
0 -0
23
5
01
0-
10
M
FZ
(Kg.)
Load (Kg)
FZ
Load (Kg)
100
M
100
10
Load
0-0
H
15
80
80
70
70
K
E 60
60
50
50
D
I
40
F
40
B
C
G
30
30 0 ,5 1 1 ,5 2
12 15 18 22 25 30
Natural Frequency (Hz) Deflection (mm)
Deflection (mm)
Type A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm) H (mm) I (mm) K (mm) Load (kg) Weight (gr.) Code
In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 27
HYDRAULIC
MOUNTS
DESCRIPTION
For good isolation, low damping is required. For motion control, high
dampening is required. The MECANOCAUCHO® hydraulic mounts
accommodate these conflicting requirements. The fluid cavity is divi-
ded into two chambers with an orifice in between, so that motion
of the elastomeric element causes fluid to flow from one chamber
to the other, dissipating energy and thus creating damping in the
system.
TECHNICAL CHARACTERISTICS
• The thickness of the metal parts make this mount robust and
suitable for off-road applications. The metal parts have a sui-
table anticorrosive treatment for outdoor applications. RoHs
compliant.
APPLICATIONS
28 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
ANTI-VIBRATION
MOUNTS
For the installation look on the Page 31 OPERATION AND ASSEMBLY.
Picture of vibration measurements tests. Picture of an engine application. Picture a cabine application.
HYDRAULIC SMALL HYDRAULIC SMALL SQUARE
HYDRAULIC MINI HYDRAULIC MEDIUM HYDRAULIC MEDIUM SQUARE
HYDRAULIC LARGE HYDRAULIC LARGE SQUARE
ØN
NN ØN
ØN
ØN
CC
C
C
C
I I
I
I
C
I
B B
I
B
B
B
ØA ØA ØA
ØA ØA
EA
Ø F
E F
E D2 D2
D2 E
D2 D1 D2
D1
D1 D2
D1 O D1
D1
O
J
J
L L
G
H
K1K1
K2K2
H
E E
H
G
H
J J
J O
L O
H H
J
L
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 29
CARGA FLECHA RIGIDEZ DINÁMICA COEFICIENTE DE AMORTIGUAMIEN
CARGA FLECHA CARGA
CARGAFLECHA
FLECHA RIGIDEZ DINÁMICA
RIGIDEZ
RIGIDEZ
DYNAMICDINÁMICA
COEFICIENTE
DINÁMICA DE AMORTIGUAMIENT
COEFICIENTE
STIFFNESSDAMPING COEFICIENTE DEA
DE
DAMPING
COEFFICIENT
LOAD
LOAD DEFLECTION DEFLECTION DYNAMIC STIFFNESS
100
CARGA FLECHA CARGA FLECHA 400
RIGIDEZ DINÁMICA
RIGIDEZ DINÁMICA
COEFICIENTE DE AMORTIGUAMIEN
COEFICIENTE D
i 70
70
100
LOAD100DEFLECTION min
i 70 300
400 400 dro
min DYNAMIC STIFFNESS
30
100 ro d 400 Hy i 60
Hy i 60 400
100
50 100
min 70
400 i 70min i i7700
±1mm
70 70 70 dro ini 300 70i 70 300 dro 0
myin minin 0
Hy ro m 200
400 inmi in 300 dro H ini 7 0 30 yddrroo m ini 7
100 70100 0i 7
0 mro i 700 300400 Hy 3030
70
H yd 0 in
6 300 dryod min 60i 6 o m i 6 i 50 HHy om
30 Hydr minini i 670 0
600
5030 50 50 5mi
rioin Hy Hdroin i in dr miin70 o0 min 30 ±1mm
inm m Hy droin m ini i 6
70 ryod
m i6700 150
300 H y m
odro i 6 i 70
0
y m mHin ydi 6r o
yyddrro mm in ±1mm ±3 mm
50 50 70 dryodH minini 200 ydHry min min 200300
200 Hdro HH droro
Hy H om 125 H ydro dro0 Hy ydro
30 y yd 30
r
o 0 i i040 i05i 050
N/mm N/mm
yydin 5i 04 i 60 200 i 6in
MINI
i
200 H Hy0i 5 i 60 H
(Kg)Carga (Kg)
20 HHm inin in
3050 30
30 50 ini min 5 min mm ooin
mm 50
±1mm
dorom ro 0 150
100 m oinmi in 5o 0 min 150
150 dro drdoro ini 5
0 20 orm
dyrd r ini ±3 mm
30 ydyr Hydini 5 200 od r id r Hy HyHy HyHHyd ro m 0
30
15 HH ydHry o mHiny 40
H150 150200 r o m
N/mm
Hy iniin4i 5
MINI
droini 4 i 50 dr i in
Rigidez N/mm
Carga (Kg)
MINI
20
Rigidez
(Kg.)(Kg)
Rigidez N/mm
20 4
MINI
80 y 0
Carga (Kg)
20 30 y m 0i 5 in 4in0
N/mm
H m
(N/mm)
30 H o m in 0 roin m m 40 droro mdroinm 20
Loss
125 dm 4in r ro i
MINI
dr m i4 150 ini 100 d i 20
MINI
y
20
1510
20 15
Hy ydro min
100 dHryo dmro 100 150 HyHyd min H yd y m ±3 mm
Load (Kg)
15 Hy H oy 20 H Hro 20
dro
angle
Carga
H dro
ydr 100 i 40
d
(º)
40 125
H60 Hy
100 i 40
Rigidez
N/mm
Hy
MINI
Rigidez N/mm
ini
(Kg)
MINI
20 15 20 80 ini
Carga (Kg)
15 80 min 15 min
Stiffness
m
Stiffness
m dro 20
angle
dro dro 20
Load
MINI
10
80 ydro
Load
10 100 80100
Stiffness
15 10 15 Hy H Hy Hy
Lossloss
60
Carga
105 10 6040 60 15
Rigidez
80 15
60 60 80 15
10
5 CARGA FLECHACARGA FLECHA 5
10
5 30
4060 RIGIDEZ DINÁMICA
RIGIDEZ DINÁMICA COEFICIENTE DE
COEFICIENTE DE AMORTIGUAMIENT
40
40 60 15
12
15 15
15
5 5 40 40 12
30 12 12
30 30 10
5 5 40 40 12 12
1 2 3 4 5 6 7 8 30 3 5 10 30 15 20 25 35 50 60 80 10 15 2 20 4
26 35 7
12 10 12
30 30 (Hz) 10 Frecuencia
102 (Hz) 4
flecha (mm)
1 2 3 4 5 6 7 8 Frecuencia
5 3 10 15 20 25 35 50 60 80 7
10 2 4 7 10
10
2 15 20
4 26 357
100 1 2 100 1 3 4 5 26 7 8 3 400 4 35 10 400 15
6 5 7 8 203 25 35 5 50 60 1080 15 20 25 35 50 60 80
13 26 flecha 8(mm)
3 4 5 6 5 7 8 Frecuencia 15(Hz)20 2 50 460 7 2
10 15 4
20 26 Frecue 7
35
1 2
flecha
4 5 7 3 10 15 203 25 5 0 50 60
35 10 80 10 25 35i 70 80 Frecuencia 10 (Hz)
70 (mm) Frec
70 Frecuencia (Hz) 7
70 1 i 70 flecha (mm) ini 300 ini Frecuencia (Hz) 2 ro min
2 Deflection31(mm) 4 ro m5in 62 Deflection 7 8 (mm) 3
300
4ro m 3 5 65 7 10
8 Frequency 15 (Hz) 20 25 3 d ro m35 5 50 60 Frequency 8010 (Hz)
15 30 20y d 25 35
4
50 60 80
7Frequency
30 10 2 (Hz)15 20 4 26 35Fre7
yd 6 0 H yd i 6 0 Hy i 6 0 H
in i 60
50
Deflection H i in in m Frecuencia (Hz)±1mm
50 flecha (mm)(mm) min flecha (mm) om Frecuencia (Hz) om
Frequency (Hz)
Frecuencia (Hz) Hydro
180 ydro 200 ydr
2000
H 200 Hydr
H
70 i 7500 i 50
150 30 i 50 all i 50 min min
30
180 180 180
min sm 2000
150 1500min 2000
1502000
dro m
all 30 dro
180 dro dro Hy S Hy ±3 mm
180 150
150 Hy 7 00 H y2000 7ll070 2000 7 00
Rigidez N/mm
125 1250 i 4
smsm 70 allin7i04 30 30
Carga (Kg)
sm 1500 Sm mmain
(Kg) (Kg)Carga (Kg)
150 in
PEQUEÑO
20 1500 30
100 150
o min s msa
1500
d rom
1500 m all 0 100
Sm
r om
mall 60 30
20 d rSo all 70 20
d r
60 y 2000
H100 1000 s 6ll06 1500
1250
Hy
dS a ll H y Sm 30
180 15 180 Hy 1250 amlla 1250 2000 Sm
PEQUEÑO
15 all 0 0
100 100 100 smalla6ll 750 1250 sms 60
70 80 1250 0 60
allll 60 0
±1mm
±1mm
all
PEQUEÑO
100
70 1000 750 sm sm0a5ll0 1000 maall 60 50 Sm a 7
100 Sm mlla6ll0 ±3 mm
angle Loss
s 50 30 30
N/mm
10 1500
1000 5ll 1500 SSmmallmall
10 ll amll a 1000 S S S a
a 0 sms ll 50 60 Sm 50
70 70 small ll5 ll6040 60 1250 60 750
N/mm
70 1250 allll 50 ±1mm
N/mm
aa a all 750 50
N/mm
sm 750 20 15
PEQUEÑO
Sm
±3±3 mm
PEQUEÑO
50
70 ssmm sm sm 0 all 00 15 a
SMALL
N/mm
1000 a4ll0
Load Carga
40 1000 SSmmall 4 a a 20
Sm Sm
(N/mm)
Load (Kg)
50 allll4500
(º)Loss(º)
20
Carga (Kg)
50
5 550 ssm s m ll 4a0ll 5 40 500 Sm 20
Rigidez
all
SMALL
a 40500400 20 0
Stiffness
m 500 4
RigidezStiffness
5070 sm asm all 0 20
Loss angle
50 70 500 750 sm 750 40 50 Sm all 4 ll 5
0 ±3 mm
N/mm
all a0ll
Rigidez N/mm
500
400
Carga
Sm ll 4S0ma
12
Rigidez
30 30 400 Sm aSllm4 12
40 400 40 Sm 15 Sm
a
Stiffness
30 all all 400 20 20
Loss angle
Load
50
30 30 50 sm 500 s m 300
30 300 300 500 40 40
15
20 30 300 all 10 all 10 15
1515
200 300 Sm
400 400 Sm 15 210 420 735
1 2 1 3 20 4 5 2 6 7 83 4 53 6 57 8 10 200
15 3 25
20 535 50 6010 80 15 20 252 35 50 60 4 80 7 15 26
2015 20 200 12
2030 30
flecha (mm)
200150
200 300 300 Frecuencia (Hz) 15 Frecuencia (Hz) Frec
flecha20(mm) 15 Frecuencia200
150 (Hz) 12 15
125
15 12
1212
15 150 150
15 150 125 12
10
20 15 100 150 10
20 125200 125 200
1 2
10
10 3 4 5 6 7 125 3 5 10 125 10015 20 25 35 50 60 80 2 4 7 10 10 15 20 26 35
10 1 2 3 100 4 5 6 7 100 3 5 10 15 20 12
1025 35 50 60 80 210 12 4 7
1015 flecha (mm) 10 1
15
2 3 100 150
4
Frecuencia
100 150(Hz)
2010 25 Frecuencia
10 (Hz)
1 2 3 4 5 flecha 6 (mm) 7 3 5 56 7 10 15 20 3 25 35 5 50 60 Frecuencia 10
80 15 (Hz) 35 50 60 80
2 4 7
180 1 2 180 1 3 4 5 2 6 7 3 125 3 5 10 2000 15 125 20 25
3 35 5 50 60 80
10 15 20 225 2 35 50 4
60 4 80 7 7 1010 15 15 20 20 26 26 35 35
Frecue
2000 4 5 6 7 2 4 7
Deflection
Deflection (mm) Deflection (mm) 70 Frequency(Hz) (Hz) Frequency (Hz) F
10
150 flecha (mm)150 10(mm) flechaall(mm) 70 100 all Frecuencia 100 70 Frequency
Frecuencia (Hz)(Hz)
10 ll 7
0 Frequency
Frecuencia (Hz)
10 (Hz)
s m 1500 sm 1500 m all 30 S ma 30 Fre
1 2 1 3 4 5 2 6 7 3 4 3 5 5 6 7 10 15 20 25 3 35 550S 60 80 10 15 202 25 35 50 4 60 80 7 10 2 15 20 4 26 35 7
0
flecha (mm) ll 60 1250 a ll 6 1250
Frecuencia (Hz) Frecuencia (Hz) ±1mm
PEQUEÑO
flecha (mm)
a sm Frecuencia (Hz)
PEQUEÑO
100 100 sm 60
350 1500 1000
1500 60 all
350 350350 1500
1000 1500 all Sm
50 Sm
300
300 300300 50 0 all
all 770 1250
1250 sm 7700 1250 700
70 sm dium m 1250
750 m 7 0 7 0 5 0
350 70 e ium 750 50 7m ±3 mm
Rigidez N/mm
1500
eddiu ium diu m 30 all
Rigidez N/mm
1500
350 o m ed meediu all 30 edmiu
diu Sm 30 30
room
±1mm
200 300 HHyd 40 0 1000
1250 HHyyddr all 4 600 1000 Hyydro 0 dryod ±1mm
50 allmm76600 s m iuiumm 7 0 1250 H 70 m 660 HyH
20 0 60 6
0 20
150
350
50 seem
dd iuiu
iu m 1500
500 d d iu m6 5001500 d ium e diu
iu m 30 iu m7 iu md ium
150350 m d eee d e m d d e 0 30
150 150 oromme 750 mm m m e
dro m all 40 50 me
d moe m all 4
200
300 200 300 yyddr ro 50 1000 750 drroroo 0 750
1000
750 dro Hyydro dro drodr Sm ±1mm
HHHyd 0 7500 HHyHydyd m0 550 70 Hy Hy Hy 0 50
MEDIUM
iu6m Smmd6iu 0 m 50
MEDIUM
4001250 Hy
m 1250
400 H 70 m605m
(N/mm)
30 Hry d r o 0 750 yy
od dm o m m H d m
20030 Hyd Hyd m 440 50 1000 HHr
ydrm dro d
Hy Hy ro HyHdyr H
N/mm
300
MEDIUM
H m H H y d 0 5 0
0 ±1mm
201520
N/mm
iu 0 500 m H m 0 0 y 4
(º)
diu m 6 iu dium m 60 iumm 20 4 m 60
ed iuem ddiu 500 iu m6 4 15 H
angle(º)
d e d 20
Load (Kg.)
70 70 m m e e e iu d iu m
(Kg)
70
100 e iu m e iu iu d e d
ro mro med omm m diu eded me ediu ±3 mm
Carga (Kg) Carga (Kg)
150 omm em
Stiffness
d d
MEDIO
d m o r o m
(Kg)
d
H Hydro m 40 y
HHy Hy y d
Lossangle
Hyydyrdoro r dr ro
MEDIO
20 0 750
400 ro 400750
H
Hy H
dHy yd
m5 Hydm 40 0 400 0 50 d
Rigidez N/mm
Stiffness
20 m5
200 Hy 50
Stiffness
400 HH
50 m 4m 0
Rigidez N/mm
200
ediu ediu m 4 ium
Rigidez
50 50 500
100 om om
Carga (Kg)
Carga (Kg) Load
100
Hyd roydro me ro m ±3 mm
Hy ydr ydr 12 dro Hyd
12
MEDIO
15 ydH
Loss
MEDIO
15 0 400300
150 H H 0 150
300 H y
4 300
300 m4 400 40 H
Rigidez N/mm
50 15 40
Rigidez N/mm
50 30 iu m 500 m 15
20
Loss angle (º) 15 15
30 d iu 500
m5
HS
450
Hyd 1000 d me
200 200
100 Hyd m ed
m ediu 50 70 o me o med
r 5 0 1000
3500 d rom e diu y d ro me
diu
±1mm
100 o
ydr Hy
70Hydr ro S ge3500 yd HS m 60 H dro 60 ±3 mm
350 H ro
MEDIO
e y d a r H H m d y m
MEDIO
ium 40 m H
350 150 rg H L diu 040 3000 H y
diu 40 70ediu 40
N/mm
150 a e d e m 6 e
N/mm N/mm
450 L m 3000 e m
romm
70 300 iu
eadrge 500
Loss angle (º) Loss angle (º)
70
300 d r 750 d 750
4000 d r g e 2030 L
y 0
Carga (Kg)
MEDIUM
y 2500 Hy Larme d 0 e 5
MEDIUM
Hydro m rg H dro L 5 H om
Load (Kg)Carga (Kg)
(N/mm)
7 0 a 0 3500
0 2500 y 0 m r iu m
MEDIUM HS
Hy L 7 H 4 3500 o iu d
arg
e S4 HS 50 dr
me
d Hy me
d ±1mm
rge 3000
350
100 100 400 Hy
350 mH0 400
ium rge dro ±3 mm
Rigidez
50 2000 dro 0
450 L La
Stiffness Rigidez
50
450 diu 60 5 3000 Hy e6700
2000 med La 60
4000 Hyge 7
N/mm
GRANDE
200 Hy7d
500 LLaar
(º)
70 180 25003500
500 20
Loss
e e L r 300 r ±1mm
Stiffness
350
180 350 r g e 4 300g
r3000 L a 1500 L ma m e ±3 mm
La 15
Load (Kg)
5a0rg0
Loss angle (º) Loss angle
La2000 dro
Rigidez N/mm
15
Loss(º)angle
400
300 rge ge ge
400
Rigidez N/mm
50300 2000
1250 30 30
150 LaLarg La60r0
GRANDE
20050 La Lar L e 60
GRANDE
200 0 2500
1250 2500 g 20 ±1mm
e5
Carga (Kg)
20 200
20 Lrage 5 1500
200 arg ge 5 e5 L
Loss angle (º)Loss angle
100 300
2000 L 1500
300 2000 rg
Rigidez N/mm
1000 La 60 1215
Rigidez N/mm
150 La ar 15
12
GRANDE
150
GRANDE
15
180 40 1250750 Lar 0 a4r0g ±3 mm
180 rge rge 150 20 geL 20
Carga (Kg)
150 5
La 1500 Lar ge 50
Carga (Kg)
750 La 1500 ge 40
1000 Lar arge
Rigidez N/mm
70
Rigidez N/mm
15
150
10020 1020
150 200
1250
1000
200
125 L 1015 Lar 10
10
70 100 125 1250
Loss angle (º)
5
15 1 2 15 50 4 7 750 ge40 4rg0e
1000
500 150 1000 Lagr e gLea
100 flecha (mm) flecha (mm) 150
Frecuencia 400 (Hz) Lar Frecuencia (Hz) Lar Frecuencia (Hz) F
7050 70 100 15 1215
125 400 125 10 10
10 10 750 750 40 12 40
500 3 5 7 7,5 8 10 500 300
15 20 325 35 5 50 a ge 10
r60 80 15 20 25 2 35 50 60 4arge 80 7 2
10 15 4
20 26 7
35
1 2 3 4 5 6 L
5070 1 2
50 70 30
3 4 5 6 7 7,5 8 15 L
10 15
300 Frequency (Hz)
Deflection
Deflection (mm) (mm)
1 Deflection
2 (mm) 3 400
4 5 6 7 7,5 8 Frequency 400 (Hz) Frequency
Frequency(Hz) (Hz)
12
30 500 3 5 10 15 2010 25 35 50 60 80 122 4 7
500
50 1 2 50 3 4 5 flecha
6 7(mm)
7,5 8
300 3 5 10 300 15 20 25 35 50 60 Frecuencia 80 (Hz) 2 4 7 10 15 20 26 35
Frec
400 400 12
30 flecha (mm)30 Frecuencia (Hz) 10 10
12
Frecuencia (Hz)
450 1 2 450 4000
1 3 4 5 2 6 7 7,5 8 3 4000
4300 5 3 6 57 7,5 8 10 15 20 325 35 5 50 60 10 80 15 20 25
2
35 50 60
4
80
7 10
2 15 204 26 357
450 0 703500 3500 300
450
30 flecha (mm) e7 flecha (mm) rge 4000 3 Frecuencia 3 (Hz) Frecuencia (Hz)
350 350 30
arg La
4000
3000 Frecuencia (Hz)10 10 F
1 2 31 L 704 5 60 62 7 7,5 8 3 0
3000
73500 4 560 6 7 7,5 8 3500 70 2 e 704 7 10 2 15 20 4 26 35
300 e e 3 5 10 2 15 20 25 35 50
e 60 80 g 30
300
350 350 rge rge arg 2500
2
La
rg 2500
3
Lar
5g 10 1530 20 25 L35ar 50 60 80
flecha (mm) La La 0flecha (mm) L 3000 60 3000 (Hz) 0 Frecuencia (Hz)
300 300 6 e Frecuencia 7 0 Frecuencia (Hz)
30 e 7 30 ±1mm
rge 0 2
Lrage
rg 50 2
L ar
ge L ar
g
La ge 5 2500
2000 2000
2500 ±1mm
r La
GRANDE
200 La 60
GRANDE
200 50 0 5400 60 ge
ge Lar
180 180
a r gege 4 2000
1 a rgrgee 2000
15001 Lar ±3 mm
200 200 L Lar 1500 LLa 60 60
40 ±3 mm
Rigidez N/mm
40 ge ge
N/mm
150
Stiffness (N/mm)
150
180 180
rge Lar Lar
LARGE
rge 1
Stiffness N/mm
1
RigidezN/mm
1250
La
Loss angle (º)
La 1250 1500
(º) (º)
1500 20
Load (Kg.)
150 20 0
Carga (Kg)
150 50 e5
(Kg)(Kg)
e g
angle
r
BIG
1 10001
1250 g La 20
100
1250
1000 Lar 20
Load (Kg)
angle
50
Stiffness
100 50 ge
Carga
1000 ge Lar 40
1000 750 Lar
Loss
g La
Lar
Loss
70 70 750 15 15
750 40 40
ge ge
70 70 500 Lar 15 Lar 15
500
50 50
500
400 400500 12
50 50 12
400 400 12 12
300 300
30 30 10 10
1 4300 300
30 1 2 30 3 4 5 2 6 7 7,5 83 5
3
6 7 7,5 8
5 10 15 20 3 25 355 50 60 1080 15 2
10 25
20 35 4
50 60 80 7 10210 15 420 26 735
5 flecha
2 6 (mm) 2 4 7F
1 flecha
2 (mm) 1 3 4 7 7,5 8 3 4 5 6 7 7,5 8 Frecuencia (Hz) Frecuencia (Hz) 20 2 25 4 7 10
Frecuencia 15
(Hz) 20 26 35
Deflection (mm) 3 5 10 15 20 325 35 5 50 60 Frequency
10
80 15 (Hz) 35 50 60 80
Deflection (mm) Deflection (mm) Frequency (Hz) Frequency (Hz) Frequency (Hz)
30 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
DINÁMICA COEFICIENTE DE AMORTIGUAMIENTO ANTI-VIBRATION
MOUNTS
IC STIFFNESS DAMPING COEFFICIENT
DINÁMICA
DINÁMICA
COEFICIENTE DE AMORTIGUAMIENTO
COEFICIENTE DE AMORTIGUAMIENTO
i 70
DAMPING COEFFICIENT
min
Hy
dro 30 OPERATION AND ASSEMBLY
i 60
min ±1mm
dro
Hy
m in i 70
ini
50 A hook wrench should be used in the slots to avoid the rotation
dro 700 dr6o0m 30
Hy
roro
ini i7 Hin
mmin m
yi
0 30
±1mm
±3 mm movement of the rubber.
dd
(º) angle (º)
o 00 ini 4
30
HHyy Hydr i i66
inin m 20 ±1mm
±1mm
mm ro 50
droro Hyd
HHyyd
d r
ini
o m 50 ±3 mm
TECHNICAL ADVICE FOR FOPS ROPS APPROVAL
Hy mini i 50
in
(º)(º)Loss
dro m 40
Loss angle (º)
Hyydro mini ±3 mm
H ro
i 40 20
±3 mm
AMC-MECANOCAUCHO’s technical department will be pleased to
angle
d
Hy o min i 40 15
20
in
angle
dr
Hy dro m 20 offer you advice on correct installation procedures to achieve FOPS/
MINI
angle
y
loss
H
DINÁMICA COEFICIENTE DE AMORTIGUAMIENTO ROPS tests approvals.
Loss
Loss
12
15
15
15
10
These pictures show a typical traction test on rectangular hydraulic
15 20 25 35 50 60 80
12
12 2 4 7 10 15 20 26 35 50 medium mount subjected to loads up to 4 Tonnes without destruc-
cuencia (Hz)
i 70 10
12 Frecuencia (Hz) tion of the part. For more information on this topic, please contact
10
min
0 ro 35
1515 2020 H d
y25
25
35 50 60
i 60
50 60 80 80 30 22 44 7
7 10
10 15
15 20
20 26
26 35
35 50
50 our technical department.
min 10 ±1mm
equency (Hz)
uencia (Hz) dro
Frequency
Frecuencia(Hz)
(Hz)
15 20 25 Hy 35 50 60 80 2 4 7 10 15 20 26 35 50
i 50 Frequency (Hz)
cuencia (Hz) min Frecuencia (Hz)
dro ±3 mm
Hy
70
aill 40
Loss angle (º)
Smmin 30
dro 20
Hy 70
all
Sm 30 ±1mm
70 60
all all 30
Sm Sm
±1mm
60
all 50 ±1mm
Sm a06ll0 15
±3 mm
Sllam7ll
angle (º)
Sam
Sm 30
0
a ll 5 20 ±3 mm
Sm ll 50 ±3 ±1mm
mm
a 0
Loss angle (º)
Small 460
(º)
Loss (º)
SSmmall 1220
SMALL
20
angle
(º) angle
ll 40
a 0
Sm all 4 50
Sm all ±3 mm
1015
Loss
Sm
Loss
202 4 7 10 15 20 26 35 50
Loss angle
15 20 25 35 50 60 80 15
15
40 Frecuencia (Hz)
uencia (Hz) all
Sm 12
12
12
15
10
10 15 20 25 35 50 60 80 2 4 7 10 15 20 26 35 50
10
10
0cuencia
15 (Hz)
20 25 35 50506060 8080 22 44 77Frecuencia
10 (Hz)
15 20 26 35 5050
15 20 25 35
12 10 15 20 26 35
uencia (Hz) 70
equency (Hz) all 30 Frecuencia (Hz)
Sm Frequency
Frequency (Hz)
(Hz)
±1mm
ll 6
0 10
0 15 20 25 35 ma 80
50 S60 2 4 7 10 15 20 26 35 50
cuencia (Hz) 50 Frecuencia (Hz)±3 mm
all
700 Sm
Loss angle (º)
mm7
eddiuiu 70 30
30
20
rommedium 30
yddrome ±1mm
±1mm
HHydro m466006
00 ±1mm
Hy allm
iu
diu
mmSededm
ium
drroome 500
Hydydro
HHy iu m550
m
eddiu m
meediu ±3
droom
m
15 ±3mm
±3 mm
mm
HH H0
y ydydrro
MEDIUM
7 4
000
m m44
(º)
Loss angle (º)
20
angle(º)
diu iu
diu
ediu
mm 20
20
30
me mm eed
dro rdoroom
angle
Lossangle
Hy Hydydr 0 ±1mm
HHy
m6
d iu 12
me
dro
Loss
Loss
Hy 0
m5 15
diu 15
15
me ±3 mm
dro 10
Hy
0
0 15 20 25 35 50 60 m4
80 202 4 7 10 15 20 26 35 50
Loss angle (º)
diu
uencia (Hz) me 12
dro 12
12 Frecuencia (Hz)
Hy
10
10
15 20 25 35 50 60 80 10
1522 4 7 10 15 20 26 35 50
10 15 20 25 35 50 60 80 4 7 10 15 20 26 35 50
0 15 20 25 35 50 60 80 2 4 7 10
Frecuencia 15
(Hz) 20 26 35 50
ecuencia (Hz)
requency (Hz)
(Hz) Frequency (Hz)
Frecuencia(Hz)
(Hz)
ecuencia Frequency
0 12
m7
diu 30
me
dro ±1mm
Hy 0
m6 10
diu
me 2 4 7 10 15 20 26 35 50
0 15 20 35 ydro050 60
25 800
Hm7 m5
diu ediu 30
Frecuencia ±3
(Hz)
ecuencia (Hz) ro me ro
m mm
yd y d ±1mm
H H 70 60
ge ium 40 30
Lar meddium
(º) angle (º)
20
dro me 0 ±1mm
Hydro 70 ium 5
Hy e
MEDIUM HS
g d 30
Lar ro m 0
e
±3 mm
d e6 ±1mm
HLyarg ±3 mm
(º)Loss
0
m4
Loss angle (º)
20
diu
me60 15 TRACTION TEST (Hydraulic medium square)
angle
dro ge Static Graph for hydro tracc Tested on: 5/10/2007 at 10.47.55
Hy Lar 0 5
20 ±3 mm
ge
angle
Lar
50
Loss
(º)
1220
700
Loss
15
gee 54
Loss angle
30
LLaarrg
15 ±1mm
10
40
15 20 25 35 rgee60 80
50 a60
L g
12 2 4 7 10 15 20 26 35 50
Lar 15
12
±3 mm
ecuencia (Hz) Frecuencia (Hz) 40
10
Loss angle (º)
0 10202 4 7 10 15 20 26 35 50
10 15 20 25 35 e 5 80
50 60
10 15 20 25 35 arg 60
L50 80
12 2 4 7 10 15 20 26 35 50
requency (Hz) Frequency (Hz)
cuencia (Hz) Frequency
Frecuencia(Hz)
(Hz)
40
ge 10 30
Lar
10 15 20 25 35 50 60 80 15 2 4 7 10 15 20 26 35 50
70 12
ge 30
Lar
70 30 ±1mm 20
ge
Lar 10 ±1mm
0
e6
10 15 20 25 35 Larg50 60 80 2 4 7 10 15
±3 mm 20 26 35 50
0
ecuencia (Hz) rge6 ±3(Hz)
Frecuencia mm
La
LARGE
(º) (º)
20
50
Loss angle (º)
ge
angle
10
Lar 20
angle
e 50
g
Lar
Loss
40
ge
Lar
Loss
40 15
ge
Lar 15
12 -5 5 10 15 20 25
12
10
10 2 4 7 10 15 20 26 35 50
10 15 20 25 35 50 60 80
2 4 7 10 15 20 26 35 50 -10
cuencia
10 (Hz) 20
15 25 35 50 60 80 Frecuencia (Hz)
equency (Hz) Frequency (Hz)
Frequency (Hz)
mm
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 31
Ø 43
M 16x31
34
6
DESCRIPTION 99
34
34
31
The AMC MECANOCAUCHO ® hydrocone combines these 6 6
two completely different requirements in one single bearing. 99 99
79,5
82,5
106
This gives you the opportunity to adapt the dynamic pro-
perties of the insulator to the individual requirements of the
10,
application.
2
Ø 77 Ø 77
Our vibration dampeners do this by the hydraulic fluid Ø 81 Ø 81
flowing from one chamber to the next as a result of the
movement of the rubber component. An energetic dissipation HYDRAULIC
92 CONE 32
Ø7042 92
results from this process. M6416 70
10 M 16x30 64
TECHNICAL CHARACTERISTICS Ø8 H6
26,5
34
31
4
6 10 19,5
• AMC-MECANO-CAUCHO hydraulic shock absorbers
®
35
6
99
79,5
82,5
have an advanced breakaway device inside the bearing
106
79,5
82,5
106
that prevents tensile forces on the elastomer by limiting
87,5
107
its upward vibration stoke. The newly-developed internal
10,
10,
structure of the vibration dampener consists of a metal
2
2
part system. The elastomer is vulcanised to the whole Ø 77 Ø 95
Ø 81 Ø 108
of this. This prevents a loss of hydraulic fluid should the
vibration dampener be subject to great dynamic overloads.
HYDRAULIC CONE 70
92
• The thickness of the metal parts ensures that the dampe- M 16x3070
Ø8 H6 M 16x30 17 H6
ner is strong enough for mobile applications. The metal 64 Ø8
4
4 X Ø12,2
35
parts are treated with a resistant corrosion protection for 10 19,5 10 20,5
35
35
6
outdoor use.
6
122,5
87,5
APPLICATIONS
107
140
110
79,5
82,5
106
87,5
The AMC MECANOCAUCHO® hydrocone is predominantly
10,
17 4 X Ø12,2
thus prevents the vehicles from rocking. This ensures a high 10 20,5
4 X 35
Ø12,2
6
177104 250 40 Sh
HYDRAULIC CONE 177105 370 50 Sh HYDRAULIC CONE
1914 175 610147 96 16,5 5
MOUNTS 32 177106 500 60 Sh MOUNTS 32
177107 550 70 Sh
177051 300 40 Sh
HYDRAULIC CONE 177052 500 50 Sh HYDRAULIC CONE
MOUNTS 70
2862
177053 700 60 Sh
110
MOUNTS 70
356 611167 110 16,5 5
177054 900 70 Sh
177055 400 40 Sh
HYDRAULIC CONE 177056 600 50 Sh HYDRAULIC CONE
2951 356 611167 110 16,5 5
MOUNTS 71 177057 900 60 Sh MOUNTS 71
177058 1000 70 Sh
32 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
ANTI-VIBRATION
MOUNTS
1000
Sh Sh Sh
800 70 70 60
70 71 71
650 Sh
60
70
Sh h Sh
500
Sh 70 S 50
50 32 2 60 71
70 Sh 3
400 70 Sh
370 31 1 60
3 Sh Sh
Sh 50 40
300 40 32 71
70 Sh
250 50
31 Sh
Load (Kg.)
40
200 32
Sh
40
31
150
100
70
50
40
30
1,5 2 2,4 3 4 4,5 5 6 7 8 9 10 11 12
Deflection (mm)
Deflection (mm)
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 33
LOAD DEFLECTION 50
1500
DYNAMIC STIFFNESS
3 DAM
31 C ON
600
250
h Sh 1000
Propiedades elásticas
31 6
0
300
31 1250
Sh 30
S
0 4 0 0 Sh
1 7 310 S h 31 5
500
AULIC
6
Load(Kg)
1 7400 S h
370 20
150
S 500
3
C ONE
600
0
5 Sh
1500
31
Propiedades300elásticas LOAD 31 70 S h
DEFLECTION
400
1250
DYNAMIC STIFFNESS 0 Sh
30
DAM
31 6
500
1
ONE 31
3 0h
Propiedades elásticas
HYDR
250
100 LOAD DEFLECTION 6 1000 DYNAMIC STIFFNESS 15
310 S h
300 2000
h
570 S
400
LOAD DEFLECTION 1 4DYNAMIC 750 STIFFNESS DAMPING COEFFICIENT
600
370
S hS 331
1
C ONEC 31
600 70
Propiedades elásticas Sh 60
Load(Kg)
20
70 S h 31 hS h 150 1000 3 h
40 SSh
500 150 250
400 500 2000
31
3311 5700 S h
31 31
0
S40
600 370
6h
400
LOAD 200 DEFLECTION 301S
2000
DYNAMIC
5301
400STIFFNESS
125 1500
0 Sh DAMPING3501COEFFICIENT
10
1 7 00SShh
50 2 4
AULICAULIC
LOAD DEFLECTION h
C ONE
300 3 30
60 S
1500 1250
56 15
33011S h h
2000 300
0 Sh 31
600 100
400
300 Frequency (Hz) 30
Load(Kg)
1250 20
40
Sh 31 76
370 250
Sh
1000
150 7 Sh
ONE
500
1 400S h ±1mm
500
31 310 5S60h0 S0 S h
600
250 1500
0
1000
31
35
8 19 4 10 0 Sh 331 5
300 1250 30
3 7 1 44 h 4,5 5 2000 200 400 31 7560 S h
Stiffness (N/mm)
400
1 3 1 S
ness N/mm
±3 mm 12
200
3 360S h S h
CAULIC 31
370 70
31 S hh
250 1000
ONE
Loss(º)angle (º)
1 ±1mm
HYDRHYDR
0
(Kg.)C
2000
400
35 4 0 150 300 0S 15
3311567000SShh
Load(Kg)
100 20 20
31 310 S h
370
300 30
0 S h±3 mm
StiffN/mm
200
150 750
1250
500
C ONE
150 500
AULIC
600
3311 4 h
1500 10
31 4
250
1 5 h 1000
400 125
Sh h
300
S 30
Load
3 S
Load(Kg) Load(Kg)
1250
15600S hh
50 20
±1mm 2 4
(º) angle
40
400
Stiff ness
3 10 15 20 25 35 50 60 80
33311540 Sh
150 500 500 200
3000
12
HYDR
31 0 S h
250 1000
N/mmN/mm
7 S
200 70 750 15
100
±3 mm
AULIC
2 0S ±1mm
60
(º) Loss
400
4 Frequency (Hz) 15
3 500 31 5
40 100 300
31 750 150
32
200 400 20
Sh
Loss angle
±3 mm 10
HYDR
2000
AULIC
0 Sh
Stiff ness
150 300 15
100 370
35 200
70
7 08 9 10
125 4
31 5 h 50 60 S80
h 12
32 C ONE
2 70
Load(Kg)
2 4
50 2
5
20
Loss angle
1,5 2,4 3 4 4,5 5 400 5006
Stiff ness
3 10 15 20 25 35
0S
150
32 1500 200 3
150 12
300 70 Deflection (mm) 200
31 4 10 30
HYDR
12
70
100 40
125
400
300 Frequency
15 (Hz)
50 10 1250
7 10 15
Frequency (Hz)0 S
h20 2 4 26 35 50
Sh
3 5 15 15020 25 35 50 60 80
150
250
6
HYDR
600 35 15
100
40
50 50 1,5 2 2,4 3 4 4,5
300
125
200 5
h 63 470 5 8 9
Frequency125
1010 1000
(Hz) 10
12 2 4 7 2
31050 60 15 80 20 26
10
35 2 50 4
70
35 500
200 2000
S 2
3h
15 20 25 353 50 60 5 80 10 15 20 25
Frequency (Hz) S h
35
Deflection (mm)
7 0
03 S 5 32 5 15 20
1,5 2 2,4 3 4 4,5 5 6 7 8 9 10 150 Frequency (Hz) 12
AULIC
40 750
2125
50
h
150 10 2000 20
125 3
15 20 25 35 50 60 80
63 S0hS
6001,5 2
370 2,4 3
35 4 4,5 5 6 7 8 9 10
32 015S h20
150 10
Frequency (Hz)
C ONE
32 7(Hz)
40
0 S SDeflection
10 50015 20 25 50 60 80
7
2 0 Sh
h
ONE 32
1500
7 3
32 32
Frequency
35 300 (mm) 2 0
32 4 S h
600
2 0 30
401,5 2 2,4 3 4 4,5 5 3 6 6
7
2h S h
8 9 10 3 6 Frequency (Hz)
4002000
32 S hS h
400 400 1250
0 3S
500 600 Deflection (mm) 2000
2 600S h
35
370 370 h h
HYDR
250
2 7 6 62705S08 9 10 0 0S 15
C ONE
1,5 100
2 2,4 3 4 4,5 5
S h4205 32 7
3
332 7
600
3 1500 1000
3001500
32h S h
400
300 500 Deflection (mm) 30
70323 S h
2000
0 Sh
370 300 30
1250
S hh
C ONEC 32
S 50 S
HYDRAULIC CONES 32
200 h
ONE
500
00
70 2 S h 0 S 32 60 7501250 332276 322 650 S h
250
600
Sh
HYDR AULIC
±1mm12
32
(º)angle (º)
300 250 30
32
400
S40h
70 2000 h
500
400 1250 2001000
500SSh 3
Load(Kg)
370
7 3 S Sh h
0 S hh ±1mm
200 2000
±3 mm 20
32
370
250
32 2 6050 40 S 0
2 33222760 S h
CAULIC
750
ness N/mm
150
5
3 3322750 Sh±3 mm 3010
Loss(º)angle (º)
ONE
200 1000
C
32
400
3 32 32 S h 5001500
Load(Kg)
2000
1500 3 h 20
AULICAULIC
300 750
500SSh
370
300 150 Stiff ness N/mm 30
0S
200
150
50
Stiffness (N/mm)
ONE
Loss
3322276400 SSh 32 640 S80h ±1mm2015
AULIC
750
1250 1250
StiffN/mm
500 2 4
32 0 S h
50 h
Sh
Load(Kg)
1500
3325 20
(º) angle
150
3502 60
4 1000
40
400
h
C(Kg.)
250
200 500
2 333222 540 S h 40 SS h ±1mm
100 40
4 1000 3 300
AULIC
750
(º) Loss
200
N/mmN/mm
300
3322 5 ±3 mm 15
32 Frequency (Hz)
Load
400 400
750 S
Stiff ness N/mm
200 35 0 20
Loss angle
32 5
HYDR
15
AULIC
150 7506
HYDRHYDR
20
Stiff ness
70 300 12
200
Sh
Load(Kg)
20
Loss angle
150 70 150
Deflection (mm) 200 300 4 0
400 500 32
Stiff ness
Sh20
500
Sh
150 10
12
HYDR
70
0 15
0
32 4
200
32 4
100
50 2 4 7 10 15 26 35 50
900 1210
S h3
70 125
400
300 150 200
400
5 10 15 20 25 35 50 60 80 Frequency (Hz)
HYDR
15
70
100 50
800 150 10 15 2 4
40 100 300 125 (Hz)
0
50 Frequency 12 2 4 7 10 15 20 26 35 50
S5 h
125 300
7
70
35 200
3 10
550020 25 3 35
15150 50 560 80 10 15 20 25 35Frequency
50 (Hz)
60 80 10
60 h
1,5 2 2,4 3 4 4,5 5 6 7 8 9 10
40 2 4
0S
40 50 12
650
70 C ONE 70
70 125
70
4500 Frequency (Hz)4 200
150 10
70 7
35
Deflection (mm) Frequency (Hz) 12
50 703 35
600 3 5 102 15 20 7
25 35 10
50 60 15 8020 26 35 50
200
4000 125
Sh
9001,5 4 4,5 5 6 7 2 2,4
8 9 10 10
40 2 2,4 3
S h 4 4,5 5 1506 7 3 8 59 10 10 15 20 25 35 50 60 80
1,5 Frequency (Hz)
h 60
50
40
800 Deflection (mm) 0 2
Frequency (Hz)4 7 10 15 20 26 3530 50
500 35 7
Deflection (mm) 0Deflection (mm)
125 Frequency (Hz)
S 10
70
Frequency150
(Hz)
3 8 9S h10 4 4,5 5
2 5 7
50
3000 Frequency (Hz)
63 7 5 8 9 1010 15 20 25 35 50 60 80
35
900 5500
1,5 2,46 h
50 0 h 2 4
7h0
401,5
650 2 2,4 3 4 4,5
S 06
7
125 0S
70 70
70 5
1,5 2 2,4 3 7
900
650
800 40
900 60 S h h
S 06 0 S 30
±1mm 70
C ONE
370 h 0
70
0 2000
400
AULIC
0
ness N/mm
0 4500 5500
70 7 0 S h 0 40 S±3
500 1500
h
800 300 7 6
70 S 70
3000
70 70 5Deflection
650
70
Sh 4000
7 60 S h mm
1250 4500 70
5500
HYDRAULIC CONES 70
600
70 7h0 h
650
ONE 70
60 S h
2500
4000
h h 20
650
0 S 50SSh 70 7 ±1mm
70
400 900
N/mm
Load(Kg)
600 0 30
70 7 77006400 Shh
CAULIC
4500
250 7 40S h 1500
S S
30
C ONE
300 4000
ONE
370
600
500 500 2000
h
70 60 S±3
15
C
7050
4000
050
3000 3000
1000
Stiff nessStiff
800
70 60 S
1250
770 SS hh h
(º) angle
20 30
3000 070
0 Sh
30
250
±1mm
C ONE
500 2500
500
7
AULIC
1500 15
0 5500
0 650 S
300
400
50 1000 2500 3000
7
ness N/mm
200 4
Stiffness (N/mm)
7700 h
0 S 0 50 ±3
(º) Loss
400 70 Sh
Stiff ness N/mm
650 7 h mm
12
C ONEC 70
2500
2000 4500
70 7 7 50 S
200
250
400 370 0
Stiff N/mm
Loss angle
70 5 h
(º) (º)
750 20
15
HYDR
600
400 12
Stiff ness N/mm
Sh
1000 4000
(Kg.)
70 0 S h
370 2000
AULIC
300 1500
angle
40 S 20
370 2000
0
Loss angle
Sh Sh
20
200
70 S h 4 10
30
70 10 0 6 15
Load(Kg)
Stiff ness
1250 10
150
Load(Kg)
HYDR AULIC
750
HYDR
500 3000
7 60 0 S80h20
1500 20
4070 5500 S h
300
80h
Load
300
250 500
40 335 50060450 S
15 2 2 4
4 7 26 35 50
Load(Kg)
3 10 15 20 25
1000 10 15 20 25 35 50
70 1250 1500
Loss
1250
250
150
300
0
7 3 0 45 2500
Frequency(Hz) 7 10
15
Frequency (Hz)
Loss angle (º)Loss
7 12 2
5
7cy0(Hz)
4 7 10 26 35 50
750 15
HYDR
10 15 20 25 35 50 60 80
100
200
250
370 1000 2000 Frequen7 15
750 Frequency(Hz)
1000
HYDR
12 20
150 100 10
200 500
h
Load(Kg)
015S h20
100 300
200 12
405
3 5 10 15 20 25 35 50 60 80
Deflection (mm) 750 10
HYDRHYDR
12
70 4
150 500 Frequency (Hz)
70 5
1,5
1,52 2,4
2 3
2,4 4 4,5
35 4 3
4,5 10
1250
Frequency(Hz)
15 20 25 35 50 60 80
2 4 7 10 26 35 50
250 Frequency (Hz) 10
15
150 Deflection (mm) Deflection (mm) Frequency(Hz)
500 1000
1000
100
h 10
0 S Sh
900 150 500 2 4
3 5 10 15 20 25 35 50 60 80 2 4
800
1001,5
1000 71 74 1 6h04,5 5 2 2002,4 3
750
3 5 10 15 20 25 35 50 60 80
12
71 71
7S h Frequency(Hz)
Frequency (Hz)
Sh Sh
900 1000 2500 Deflection (mm)
Deflection (mm) Frequency(Hz)
740 4,5SS h 5
650 1,5 2 2,4 3
71 71 6050 0 Sh
600
800 900
2000 0
7 1 7 AMC MECANOCAUCHO
Deflection (mm)
h
C ONE
7 71 60 60 S
800 10
500
1000 100
650AMC MECANOCAUCHO
150
100 ®
HYDRAULIC CONE 71h 71 1
2500 7500 ®
HYDRAULIC CONE 71
±1mm
S hh h 3 71 5 30 2 4
70 6h050SSS h
600
71
900
400
1000
800
1500
2000 2500 70 S h
10 15 20 25 35 50 60 80
ONE
650 1,5 1 S
71
Sh
370
500 2 7
2,4 1
S 0 3 1250 4 4,5 5 0
70171 40 S h 6
1,5 2 2,4 3 4 4,5 5
h
900
71
70 S 71
ness N/mm
71 S h
71
1000
7 540
71 60mm
370 500
CAULIC
2000
2500
Loss(º)angle (º)
ONE
71
650 100
Load(Kg)
1250
71 0 S h
250
0 1 ±3
C
500
h 6 h 7
HYDRAULIC CONES 71
600
S S 20
±1mm 30
0 7 1 0
h
300 30
7 5
71 60SShh
N/mm
5 h
2000
750 1500
C ONE
4 S 4,5
1000
400 1500
71
S h400SShh S h
200 1000
AULIC
1000
712,40S
500
400
1,5 2 3 5
Load(Kg) Load(Kg)
250
370 370 1 40 ±1mm
771 S h
Stiff nessStiff
1250
1 h 0 7
1250 ±3 mm
1
1500
7 S (mm)
1250 7 71 0
400
0 Sh
750
150 800
40 0 Sh
74001 17 6 71 6
200
300
HYDR
300
71 40
1000
AULIC
71
(º) Loss
ONE 71
1 ±3
Stiff ness N/mm
1000 2500
71 50 S h
Stiffness (N/mm)
7 7
250
AULIC
20
Stiff N/mm
Loss angle
Load(Kg)
150 650
250 1000
1
0 Shh
HYDR
7 15
AULIC
600
1000 500
750 12
0 SS1 500S h
100 600
Load(Kg)
250
200 20
1 770 S
h
(Kg.)
40 S h
900 2000 20
Loss angle
90
600SSShh
300 750
5
7 2000
7
Stiff ness
500 400
C ONE
1
750
71
713 771 6 5 h
200
200
100
150 500 800
Sh 10
12 74 10 71 6
30
50 6040 80 0
Load
HYDR
1
70 500 15
4
C ONEC 71
90 300 10 15 1500
20 25 35
7 1
2 7
7
Frequency1(Hz)
15 20 26 3530 50
S h450 SS h
400 2500
h 107 15 20 26
150 650 1500
400 370 Frequency(Hz)
HYDR
600 400
500 15 10
150
3 0
70 S7Frequency
HYDR
71 (Hz) 0 S
h
50
71 71
90 1,5 2 2,4 3 4 4,5 5 6 7 8 9 10 11 12 400
1 5560 S h
300
500 300
Stiff ness N/mm
Frequency(Hz)
300 Deflection (mm) 400 1000 12
7
AULICAULIC
100 30
Stiff ness N/mm
(º) (º)
50 10
Sh 10 1 15
Load(Kg)
70 300
1,5 2
100
2,4 400
3 4 4,5 5 6 7 8 9 10 11 12 3 5 10 15 20 25 35 50 60 80 2 4 7 20 26 3520
12 50
angle
Load(Kg)
450
250 370Deflection (mm) 10
750 Frequency (Hz)
90 Frequency(Hz) 3520
angle
70 1250
200 3
7 1 10 300
15 20 25 35 50 60 80 2 4 7 10 15
hh
20 26 50
400 SS
50 750
(º)Loss
3300
77116050 80S h
2200 2,4 Frequency(Hz) Frequency (Hz)
Stiff ness N/mm
1,5 4 4,5 5 6 7 8 9 10 11 12 10
1000
Loss
70
50 Deflection (mm)
4 15 2 4
Load(Kg)
150
250 3 5 10 15 20 25 35 50
71
HYDRHYDR
Loss a
31
0 Sh
30
31 6
15
ANTI-VIBRATION
0 Sh ±1mm MOUNTS
31 570 S h
STIFFNESS DAMPING COEFFICIENT
12
31 ±3 mm
31 7 h 20
0S
31 14 60 S h
12 30
HYDRAULIC CONES 31
3
0 Sh ±1mm
10
15
5031 605 80
2 4 7 10 15 20 26
35 50
20 25 35
Frequency (Hz) ±3 mm
Loss angle (º)
(Hz)
Loss angle (º)
0 S hS h
12 20
32 371 40 30
h 10
20 25 35 60 S80
3502 60 152 4 7 10 15 20
±1mm
26 35 50
0 Sh
Frequency (Hz)
(Hz)
±3 mm
32 5
Loss angle (º)
12
20
hh
740060SS 80
10
15 332250
20 25 35 30
15
2 4 7 10 15 20 26 35 50
Frequency
(Hz)(Hz)
0 Sh
Frequency
ncy (Hz)
32 6 AMC MECANOCAUCHO® HYDRAULIC CONE 32 ±1mm
0 Sh 12
±3 mm
32750 S h
Loss angle (º)
32 20
30
10
h
HYDRAULIC CONES 32
600 SSh
2 4 7 10 15 20 26 35 50
20 25 35 350
322604 80h Frequency (Hz) ±1mm
0S 15
±3 mm
32 5 0 S h
(Hz)
Loss angle (º)
32 7
Loss angle (º)
20
30
12
h
0 0ShS
32324 6 10
±1mm
Sh 15
2 50 ±3 mm
2 4 7 10 15 20 26 35 50
20 25 35 S h50360 80
Loss angle (º)
Frequency (Hz)
(Hz) 70
70 12
20
Sh h
6040 S 30
±1mm
7032 10
15
±320mm
0 Sh
2 4 7 10 15 26 35 50
20 25 35
7 5 80
50060 Frequency
Frequency (Hz)
(Hz)
Loss angle (º)
(Hz) 20 12
AMC MECANOCAUCHO® HYDRAULIC CONE 70
h h
0 S 40 S
70 7 70
10
S h 15
2 4 7 10 15 20 26 35 50
50 0 30
±1mm
06
15 20 25 35 60 80 Frequency (Hz)
HYDRAULIC CONES 70
ncy (Hz) 7 12
Sh ±3 mm
7 0 S h70 50
Loss angle (º)
70
Loss angle (º)
10
50 60 S80
h 20 2 4 7 10 15 20 26 35 50
5 20 25 35
60 Sh 30
±1mm
0 0 Frequency (Hz)
770 4 h
cy(Hz)
h S
15 ±3 mm
70 S70 50
Loss angle (º)
70
Sh 20
12
0 60S h 30
±1mm
70
70 4 S h 10
±3
20 mm
50 60 50
15 2 4 7 10 15 26 35 50
70
5 20 25 35 80
Loss angle (º)
Frequency (Hz)
cy(Hz) 20 Frequency (Hz)
12
0 Sh
70 4
AMC MECANOCAUCHO® HYDRAULIC CONE 71
10
h
70 S
15
2 4 7 10 15 20 26 35 50
h
7201 25 35 60 S
5 50 60 80
Frequency (Hz)±1mm
cy(Hz) 71 30
12
HYDRAULIC CONES 71
h 10 ±315mm20
50 S80 2 4 7 10 26 35 50
15 20 25 35
71 50 60
Loss angle (º)
Frequency (Hz)
uency(Hz) 20
Loss angle (º)
h
70 S h
40 SS h
71 7711 60 30 ±1mm
15
h ±3 mm
h 50 S 12
70 S 71 h
71 60 S
Loss angle (º)
71
20
30
10 ±1mm
15 20 25 35 50 60 80 h 2 4 7 10 15 20 26 35 50
4 0 S Frequency (Hz)
ncy(Hz) h 1 Frequency (Hz) ±3 mm
70 S 7 50 S hS h 15
71 1
7 71 6 0 ±1mm
oss angle (º)
30
* In order to adapt its products
20 to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 35
12
h
40 S S h ±3 mm
CONES
DESCRIPTION
The AMC MECANOCAUCHO® cones work the rubber in shear com-
pression. They are composed of two parallel conical metal parts.
They have two washers, one as a buffer and the other for centering.
TECHNICAL CHARACTERISTICS
• The AMC MECANOCAUCHO® Cone mounts are safe and stable
elements. They do not allow the suspended elements to tilt, while
being flexible enough to avoid the transmission of noise and
vibration through the structure.
• They are supplied with stop and centering washers. This renders
deflection above the limits of the Mecanocaucho® Cones impos-
sible, even at extreme loads.
• The washers protect the natural rubber (which is highly elastic
and highly resistant) from ozone and aging, as well as from metal
CONE WITH CUTOUTS
knocks and dripping oil. The characteristic deflection curves
of the AMC MECANOCAUCHO® Cone mounts with centering Type Weight (gr.) Code Load (kg) Shore
washer are quite linear, increasing progressively as the load
increases. Thanks to this they can safely dampen overloads of up
137007 25 45 Sh
to three times the maximum admissible load.
APPLICATIONS 00 126 137008 50 60 Sh
Our technical department can provide you the elastical constants and
137914 80 45 Sh
can recommend you the optimal position of the cutouts.
137918 200 70 Sh
SOLID CONE
137031 120 45 Sh
137039 330 70 Sh
137041 140 40 Sh
137043 190 50 Sh
30 1167
137042 300 60 Sh
137044 370 70 Sh
137065 200 45 Sh
CONE WITH CUTOUTS
35 1328 137067 450 60 Sh
137068 760 70 Sh
137961 300 40 Sh
137963 650 60 Sh
137871 440 45 Sh
120 NP 6890
137872 720 55 Sh
36 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
ANTI-VIBRATION
MOUNTS
Ø 38
Ø8,2 Ø 54
Ø 54 Ø 12,5
Ø12,2
3
2 2
12
Ø 38
18,5
31
3
Ø8,2
18
52,5
2,5
2,5
2 2
52
12
2
31
Ø8,2 Ø 54
3
2
Ø 54
Ø 38
Ø8,2 Ø 60
Ø 60
Ø 46
Ø 38
68
68
Ø 46
106
78
84
106
7084
6170
61
78
84
84
A A
A A
A A
A A
6,5
11 11
50
6,5
Top Washer Cone 00 code 610053 Top Washer Cone 10 code 611068 Top Washer Cone 12 code 611068
50
Lower Washer Cone 00 code 610053 Lower Washer Cone 10 code 611068 Lower Washer Cone 12code 611068
4
20,5
4,5
18
29
4
4
61
77
82,4
5
Ø 16,5
5
Ø 76 Ø 16,5
5
Ø 82,5 Ø 76 Ø 16,5
SECTION A-A Ø 80 Ø 76
92 Ø 95
70 R 5,1 120
64 90
Ø11
82,5
79,5
106
A A
100
79,5
82,5
106
74
A A 64 A A
70
10,
12
92
2
12
Top Washer Cone 20 code 610049 Top Washer Cone 30 code 608074 Top Washer Cone 35 code 608082
Lower Washer Cone 20 code 610050 Lower Washer Cone 30 code 608125 Lower Washer Cone 35 code 608097
10
3535
57
4 4
9999
12
125
Ø 120
5 5
Ø 76
15
10
Ø 95
Ø 76 Ø 120
Ø 95 SECT
IO N A-A
100
100
74
74 4 x Ø 12
150
100
4 x Ø11
4 x Ø11
A A
120
9090
120
A A 144
A A 175
Top Washer Cone 38 code 610147 Top Washer Cone 120 code 606378
Lower Washer Cone 38 code 608074 Lower Washer Cone 120 code 606379
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 37
NATURAL FREQUENCY LOAD DEFLECTION GRAPH
AMC MECANOCAUCHO® CONE AMC MECANOCAUCHO® CONE
WITH CUTOUTS TYPEFREQUENCY
NATURAL WITH CUTOUTS
LOAD TYPE
DEFLECTION CURVE
CONES MECANOCAUCHO® CONES MECANOCAUCHO®
800 800
35
12
700 700
0
-7
0
-7
NP
0
38
35
5
0
55
P5
-6
-6
600 600
N
38
0
0
12
35
500 500
-6
0
0
-6
12
400 400 0
35 -5
5
0
P4
38
NP
38
N
-5
30 20
45
0
-7
0
12
-7 -
30
-7
0 70
300 0
30
300 20 -4
38
-6
38
0
0
-6
-4
250
0
30
250
0 60
20
200 - 70 -
-6
10 2
35
5
0
0
190 -4 -7
-4
0
30
35 12 -5
5
-5
30
0
150 0
150 -4
0 30
-6 5
30
10 -5
-4
12
LOAD (Kg)
120
0
12
5
-5
(Kg)
-4
20
100
(Kg.)
5
20
-4
100
5
Load (Kg.)
LOAD
10
80
Load
00
5
-4
80 -4
-7
5
12
70 10 45
0
0
-7
12
-4
-
70 00 2
5
-7 0-
1
60
0
1
00
60
-6
70
50
0
50
0
40 -6
00
40
10
-6
30
0
30
25
00
-4
5
25
5
20 -4
00
20
15
15
10
6 7 8 9 10 11 12 14 16 18 20 22 24 1 1,5 2 3 4 5 6 7 8 9 10
NaturalFrequency
Natural FrequencyHz(Hz) Deflection (mm)
Deflection (mm)
38 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
ANTI-VIBRATION
MOUNTS
SOLID CONE
Weight
Type Code Load (kg) Shore
(gr.)
137005 40 45 Sh
01 128 137006 70 60 Sh
137015 105 70 Sh
137010 50 45 Sh
02 132
137011 90 60 Sh
137021 100 45 Sh
137023 270 70 Sh
137921 120 45 Sh
137925 270 70 Sh
137930 250 45 Sh
137932 690 70 Sh
137935 250 45 Sh
137937 690 70 Sh
137903 160 45 Sh
137905 350 70 Sh
137071 180 45 Sh
137079 500 70 Sh
137063 310 50 Sh
137062 750 70 Sh
137075 300 45 Sh
137078 900 70 Sh
137171 400 45 Sh
137173 1100 70 Sh
137981 400 40 Sh
137982 600 50 Sh
39 1438
137983 900 60 Sh
137984 1100 70 Sh
137081 420 45 Sh
137083 1080 70 Sh
137091 900 45 Sh
137093 1560 70 Sh
137176 500 50 Sh
137178 1560 75 Sh
137101 1000 45 Sh
137103 2500 70 Sh
137786 850 45 Sh
75 4230
137787 1600 60 Sh
137830 1750 55 Sh
121 NG 7840
137833 2000 65 Sh
137841 730 45 Sh
121 NP 6940
137829 1200 55 Sh
137891 175 50 Sh
141 1039
137893 250 60 Sh
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 39
CONE TYPE 01 CONE TYPE 02 CONE TYPE 11
88,4 ØØ54
54
Ø 38 ØØ12,2
12,2
Ø 48
Ø 8,2 Ø 10,5
33
2,5
2,5
18
2,5
18
2
12
12
52
2
52
2
29
35,5
2
33
3
Ø 38 Ø 12,2
Ø 12,2
46 Ø 54
Ø 54
Ø 60
84 Ø 38 Ø 60
10,5
6,5
Ø 54
50
1111
6868
54
9
Ø 54 Ø 12
Ø 13,5
3
A A
3
A A A A A A
27
27
78
61 70,9
4,5
78
77
84
4,5
77
70 84
106
106
3
3
Top Washer Cone 01 code 610053 Top Washer Cone 02 code 610064 Ø 54
Top Washer Cone 11 code 611080
Lower Washer Cone 01 code 610053 Ø 54
Lower Washer Cone 02 code 610064 Lower Washer Cone 11 code 611080
Ø 61,5
Ø 61,5
CONE TYPE 13 CONE TYPE 14-2 holes
SECTIO N A-A
CONE TYPE 14-4 holes
Ø 54 120
82
120
70
Ø 12,5 2 x Ø 12,5 4 x Ø 11
3
21,5
2,5
55,5
70
44
70
A A A A
3
Ø 54
Ø 60
Ø 54 Ø 54
Ø 13,5 Ø 12
3
3
27
27
68
11
4,5
4,5
77
77
A A
78
3
3
84 Ø 54 Ø 54
106 Ø 61,5
Ø 61,5
SECTIO N A-A
Top Washer Cone 13 code 611080 Top Washer Cone 14-2 code 611080 Top Washer Cone 14-4 code 611080
Lower Washer Cone 13 code 611080 Lower Washer120
Cone 14-2 code 611080 Lower Washer Cone 14-4 code 611080
120
82
CONE TYPE 17 CONE TYPE 21 CONE
70
TYPE 31
2 x Ø 12,5
4 x Ø 11
Ø 76 Ø 76
Ø
Ø 38
76 Ø 16,5
Ø 67
Ø12,5 ØØ16,5
38
Ø 16,5
5
3
70
29
4
21,5
4
44
70
21,5
27
4,5
4
2,5
77
4,5
A A
61
61
A A
61
5
55
Ø
Ø 16,5
16,5 Ø 16,5
3
Ø Ø 76
Ø 54 Ø 76
76 Ø 80
Ø 60 Ø 83
106
84 82,5 R 5,1
78 79,5
79,5
82,5
79,5
106
68
11
A A
7092
6470
64
92
A A
10,
A A 64
A A 70
10,
106 10, 2 92
2
Top Washer Cone 17 code 606285 Top Washer Cone 21 code 606285 Top Washer Cone 31 code 608074
Lower Washer Cone 17 code 608074 Lower Washer Cone 21 code 608074 Lower Washer Cone 31 code 608125
40 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
ANTI-VIBRATION
MOUNTS
5
4
5
18
35
4
33
4
82
7
99
86
74
73
5
5
Ø 76
5
Ø 16,5 Ø 76
92 Ø 76
70 Ø 95 120
64 96
90 1
Ø1
1 Ø1
100
74
82,5
79,5
106
100
74
76
A A
A A
A A
90
120
Top Washer Cone 33 code 608074 Top Washer Cone 36 code 608082 Top Washer Cone 39 code 610147
Lower Washer Cone 33 code 608125 Lower Washer Cone 36 code 608074 Lower Washer ConeI 39 code 608074
6,8
Ø 21 ØØ
110
110 Ø 21
ØØ
20,5
77
20,5
26,5
27
5
19,5
27
5 5
5,5
5
5
5,5
21
21
5,5
5
107,5
89,5
145
107,5
86
86
14
14
88
10
14
5
4
8
ØØ5454 ØØ20,5
20,5
Ø 21 ØØ
115
115 ØØ9595 Ø 24,5
Ø 67 Ø 72,5
Ø 103
Ø 103
R Ø 75 Ø 95
1111
5
11,5
66 ØØ Ø 112
11,
10
10
R5 11
3
51
120
121
120
121
92
99
92
92
99
92
123
101
97
A A AA AA AA
A A
A A
112 97
9797 112 101
111
111 140
140 123
Ø 13 140
140
,5
Top Washer Cone 40 code 610027 Top Washer Cone 60 code 610032 Top Washer Cone 65 code 608144 Top Washer Cone 70 code 608033
Lower Washer Cone 40 code 608069 Lower Washer Cone 60 code 610033 Lower Washer Cone 65 code 608072 Lower Washer Cone 70 code 606145
CONE TYPE 75 CONE TYPE 121 NG CONE TYPE 121 NP CONE TYPE 141
Ø139
Ø 139 Ø139
Ø 25
Ø 25 Ø 116
Ø 21
Ø 139 Ø 21 Ø 25
Ø 18
1010
ØØ139
25
10
10
Ø 25
5757
55 77
57
57
15,513
37,5
33,5
37,5
49,5
1212
58,5
12
125
12
125
125
5
125
Ø 121,5
127
Ø 120 R5
Ø 121,5 Ø 120
142
127
Ø 120
142
8787
RUBBER
HARDNESS
RUBBER
Ø 93
1515
HARDNESS
Ø 98,7
1010
15
15
10
Ø 95
10
Ø 98,7
Ø 120 Ø 105
1515
1515
1010
Ø 120
Ø 120
Ø 25 SECT
IO N A-A
Ø 120
25 SECT
IO N A-A SECT
IO N A-A 106
Ø 4xØ11
Ø 120 A-A
SECTION 4 x Ø10
SECTION A-A 4 x Ø10
4 x Ø12 4 x Ø12
4 x Ø12
150
100
150
100
150
100
133,4
159
130
150
100
106
133,4
159
A A A A A A
A A A A
A A
144
144 144
175 175
175
Top Washer Cone 75 code 608332 Top Washer Cone 121 code 606378 Top Washer Cone 121 code 606378 Top Washer Cone 141 code 608074
Lower Washer Cone 75 code 606619 Lower Washer Cone 121 code 606379 Lower Washer Cone 121 code 606379 Lower Washer Cone 141 code 608125
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 41
CONOS SÓLIDOS
CONOS SÓLIDOS
Propiedades elásticas
Propiedades elásticas
Propiedades elásticaselásticas
Propiedades
NATURAL NATURAL
FREQUENCIES AMC
FREQUENCIES AMC LOAD DEFLECTION GRAPHS AM
LOAD DEFLECTION C
GRAPHS AMC
NATURAL
NATURAL
M FREQUENCY
FREQUENCIES
ECANOCAUCHO
M ®TYPE
NATURAL AM C CONE
SOLID
FREQUENCIES
ECANOCAUCHO ®TYPE CCONE 01-33 LOAD
01-33
AM
SOLID DEFLECTION
LOAD
MECANOCAUCHO
LOAD
M GRAPHS
DEFLECTION
®TYPE
ECANOCAUCHO AMGRAPHS
CCONE
GRAPH
SOLID
DEFLECTION
®TYPE 01-33
SOLIDAMCONE
C 01-33
1000 MECANOCAUCHO
AMC MECANOCAUCHO
1000 ®TYPE
®
SOLID
SOLID
MECANOCAUCHO CONE
CONE 01-33
TYPE 1-33
®TYPE SOLID CONE 01-33
900 MECANOCAUCHO
900 M
AMC ®TYPE SOLID
ECANOCAUCHO
MECANOCAUCHO CONE
®TYPE 01-33CONE TYPE
® SOLID
SOLID 01-33 1-33
3 3 33 0
1000 900800 0
1000-
3 70
-7 900
800 -7 -7
800 800 3 - 7 303
70 033 33 0
31 - 31 800700 800 -07 70 7
0 - 14 70 14
700
-7
0 1- 3- 37 3170
-
33
-
800
700 700 800 31 70 -7
014 703
-
14 70 310 -7 700 700 - 14 70 -
-7 -7 140 600 600 -7 31 - 60 31 0
700 3 700 0 33 -7 0 -7 14 14033 - -6
600 6003 - 6 21- 0 21 0 600 600 3
3 60
33 0 -63703 -7 -6 -
600
31 600 500 70 33 - 70 - 60 33 - 60
-6 3211 - 0 - 6 210 500
1-
500 500- 60 7 0 -7 500 720 21 7-06031 3160
31 0 14- 63001 14 0 500 - 0 - -
500 500
-6 21 -6 2131 0 31
0 14 - 60 - 60 -6
140 400 04 -6
400 400 -6 -6
400
- 61 14 60
400 4 0 - 0
0 0 400 1 -74 -7
400 400 17 017 1 17 0
17 6-07 50 60 - -750
31 3117 - 70 1 - 17 1-7 1 - 16-0 137150
31- 50 --573 1 1 70 11 300 300 - 6021 - 503 2 -
300 300 001 -21 11 - 70 1 3 - - 7 - 13 31 0 -
-5 210 1710 - 300 21 21 473501
300 33 - 3 7 - 7 1730 300 45 7
-4
5
-4
5
0 300 33 5 -
14 210- 60 70 - 70 14
0 - 26 54 - 03 - 5 -
250 -
33 4 250 17 - 43513 - 6
10
-6
0 -7
0 250 250 - 41 70 3 - 7 1 14- 4- 56700 - 4 313- 70 60 3-345
250 - 45 4- 445 0 7 - 1 - 1445 0 250 250
4
1 701 - 1 61041171 7- 0 3 1
3 3 76-0 33
5 17 - 6
250 - 455 6107 -4 - 1 - 1-
- 60 -6 5 11 17 11 - 17
200 0 0 200
200 200 60 -06
0
200 200 200 200 6 01 - 1
11 11 - 1 1- 6
17 21 13 1 1 - 2 13 - 161 11 5 11 5
17- 4 21 - 4 13 - 5 7 - 1 1 - 6601 - 2 - 513 0- 45 5 3-5 45 -5
150 - 45 150 - 45 - 555 457 - 0 451 - 4 5 - 5 60 150 4521 - 13-5 1 521 4- 5 1-355
150 5 1505 45 5 5 150
150
21
-
45 17 21
-4 - 13 -45
150 - 1-475
17 17 45
0 01 -45
(Kg)
Load (Kg)
13 -4 1
Load (Kg)
13 -7 0 0 -7 13 13
Load(Kg)
13-
Load(Kg)
- 413 0 0
-445
Load(Kg)
1
Load Load(Kg)
5 - 4 11 0
100 5 100 111 - 0 --7 700
Load
(Kg.)
100 100 - 411 001 -
5
022 - 5 02 01 11- 4
-062 11 11
80 80 - 660 0- 6 0 60
80 80 0 80 80 60 -6 - 0
0
011 - 01 0 80 80 - 02 02- 6
70
70 70 -061 02 02
70 - 660
0 0- 6 7070 70
70
60 60 60
0 0 60 -660
0
60 -6 1-
6060 60 01 0 01-
01
0 02 0 60
50
50 50 50 022 -- 4 - 42 -
45 5 45
5 5050 50
50 5 45 545
40
40 40 40 -4 2- 2- -4
0011 01 0 02 0 020
-- 44 - 41 - 4040 40
40
55 5 45 5 45 5
-4 - 445
30
30 30 30 01 01 1- -
001
3030 30
30
25
25 25 25
2525 25
25
20
20 20 20
2020 20
20
15
15 15 15
1515 15
15
10
10 10 10
77 88 9 7 10
9
7 108 811
11 912
9 10 1014
12 11 11 1216
14 12
16 18
1414 20201616
18 2222 18
24
18
24 2020 22 124
22 24
1 1,5 1,51
1
2 2 1,5
1,5
3 322 4 4 353 5 6 4647 7 55 66 77
Natural
Natural FrequencyHz
Natural
FrequencyHz FrequencyHz Deflection(mm)
Deflection(mm)Deflection(mm)
Deflection(mm)
Natural Natural
Frequency FrequencyHz
(Hz) Deflection (mm)
NATURAL FREQUENCY
NATURAL
NATURAL FREQUENCIES
NATURAL
FREQUENCIES
NATURAL AM
AMCC
FREQUENCIES
FREQUENCIES AM
AM CC LOAD DEFLECTION
LOAD
LOAD DEFLECTION GRAPH
GRAPHS AMAM
C GRAPHS
DEFLECTION AMCC
MECANOCAUCHO®
ECANOCAUCHO® SOLID CONES 36-141 LOAD DEFLECTION
LOAD GRAPHS
DEFLECTION C
GRAPHS AM
MECANOCAUCHO®
AMC MECANOCAUCHO® SOLID SOLID
CONE CONES
TYPE 36-141
36-121 AMC MECANOCAUCHO SOLID
CONESCONE
36-141 TYPE 36-121
M SOLID CONES
MECANOCAUCHO® 36-141
SOLID CONES 36-141 MECANOCAUCHO®
MECANOCAUCHO® SOLID CONES
MECANOCAUCHO®
SOLID 36-141
CONES
®
SOLID CONES
36-141 36-141
2500
MECANOCAUCHO® SOLID
2500 2500 2500
2500 2500 2500 2500
0
707
70 0
70 70
-7
65
0- -7
-6 0
- 6 G 55 G 6 65
70
70 - 7
-07-
705
-7
5
70
0G
6
7012 0
7070 N N 5
75 21 N NG 1 N NG
-6 0
2000
070
-
70
- 61 N
70
2000 2000
0
2000
0
701 1 N 6
2000
7
- 6- G 6G - 60 - 60- 60 40 4
5 N
2000
7070 -
2000
1 12610 12 21
-6
2000
1212
1800
12 - 7-07G01521
060 565
1800 1800
1
261 G066 60 60 4 0 70
0
1
1800
12
1800
60 70
1800
1212
1800
0NG -5070- - 6
1800
5
12
1
0 55
- 7 701 6565 G 5
5 - 70
1 N1
60610 N
-
12
1 N G 55
60
7575
65
75
1500
-
1N
6G
5
GNG
12
60 - 70
-6 0
1500 1500
65 - 75
56-55
1500
0 21 - 7
75 5 - 6
755 5
- 6- 6
55
75
1500
NP 5
-
5 5
P 55
60 5
0
1500
65
1500
-
-7
1500
6
-7
55
0 0
755- 67
6
-
0
7
0- 6 5 -
55
7
1N P
5
0
660
70 0 40
12 21 N
6
0
- 4 45 450- - 60 NP
05 -
- 4 6065 - 0
70
60 60 - 6 65- 612610
12 12
1
12 6N
5 40 -65 5
60
6
-
1 N1 N 70 70
60 60 -
5 40 70- 650
0 5
-
1 N - 6557550-39 -3-945
670
12 70 70
36
- 7 70
- 4 45
7
-7-4
-346 6
36 3
-
36 - 70
6-
3
-
-
P 5P - 4 7- 54-
0
5
-7
70 70 -
P
1000
0-
0
0-
- 76 -
65 - 365 9 - 6
1000 1000
3
36
5 P6
4
-7
1000
55
065
5 55 5 545
1000
70
1000
-6 -
70
1000
5
1000
6
60
0- 0
5
6-5 60- 6 36 3
70
6
- 6 60
6405 0
-4
-4
0
45- 45
75 75 -
800
60 0
-6
800
3
800
50 0 45 9 - - 6
5
800
-4
0 60
60
- 4 45
0
39
800
75 NP 4NP 4
800
- 4 45 9 - - 5 P 3 39
800
5
800
5
12 12
700
0 45
0
1
5
-4
700
5
700
39
P 45
700
4
21 - 6 - 64
75 5 - 4
1 1
40 4 N - 5 - 5 0 50 6 - 36
- 6 650-
40
5
700
P
1 N NP5
-6
12
700
36 - 60
700
45
NP 0 05
- 6 - 60 N
12 251 - 4
700
40 40 -7
-4
7
-6
- 66 -
36 36 12610
1
40 3
40
600
-6
0
0
600
0
600
-6
45
600
39 1 N
6
0
0 60
5 5
-5
17
-
0
-
P
40
600
0
39 39 5 - 5 -
60 - 5
600
36
120
40 3 5 - 50 - 50
600
9
600
-36
9
500
36
39
500
39
500
0
500
0
3
6
-5
6
500 500
40 403- 39- 50 50
500
39 39
500
0
45
0
39
40 3 5 - 5040
-
6
- 4 94-5 - 40
5
65 5 -
50 36
- 4 65
-4 -4
-
-4
- 645 9 -
36 6 -
400
39
6
36
400
-
5
Load (Kg)
400
0 04
5 40
5 40
Load (Kg)
400
0
3
5
-
3
-4 9-
400
40
36
400
(Kg.)(Kg)
400
Load (Kg)
400
Load(Kg)
(Kg)(Kg)
-4
45 - 4
40
3
0 - 40
6-
Load(Kg)
-4
(Kg.)
45 - 45
40
LoadLoad
300
45
Load
300
5
300
5
300
-4
300
Load
300
5
300 300
250
Load
60 0
14 14
1- -6
14
250
1-
250 250
1- 1
250
1-
14 41
60
14
1
60 - 60
14
200
60
1-
14
60
14
50
50 0
1- 1-
-5
1-
1-
150
50 50
14 41
150
14
14
50
150
50
150
1
1-
1-
1-
150 150
50
14
150 150
42 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
ANTI-VIBRATION
MOUNTS
Installation examples.
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 43
CONES WITH
FIXATION FLANGE
DESCRIPTION
The cones with fixation flange from AMC MECANOCAUCHO® work
the elastomer at shear compression. They are comprised of a high
strength external metal armour and a conical internal that is placed
concentrically.
TECHNICAL CHARACTERISTICS
The cones with fixation flange from AMC MECANOCAUCHO® are
conceived to offer predominant axial elasticity under heavy loads.
The used elastomer is a low dynamic rigidification elastomer, which
makes it possible to obtain low natural frequencies thus maintaining
excellent stability of the suspended unit.
The mount’s radial stiffness is superior to the axial. This is particular-
ly interesting for applications where great horizontal stability needs
to be maintained.
The AMC MECANOCAUCHO® Cone 100 mount is supplied with a
height adjuster. This makes it possible to easily align transmission
shafts without having to use additional accessories to do so.
All the models also incorporate an interlocking metal part that
allow them to act as a FAILSAFE system. Thanks to this, and to the
ruggedness of the metal parts, this mount is suitable for applica- Type Weight (gr.) Code Load (kg) Shore
tions where the suspended unit is submitted to great shocks. 137085 120 40 Sh
137086 170 50 Sh
APPLICATIONS Cone 50 M16x2 1600
137087 250 60 Sh
137088 300 70 Sh
The AMC MECANOCAUCHO cones with fixation flange have been
®
137231 120 40 Sh
designed specially for use in engines and auxiliary machinery for sta- 137233 170 50 Sh
tic applications and for applications in all kinds of vehicles. Cone 50 M16x1,5 1600
137235 250 60 Sh
137237 300 70 Sh
137095 150 40 Sh
137096 220 50 Sh
Cone 51 M16x2 1750
137097 320 60 Sh
137098 420 70 Sh
137241 150 40 Sh
137243 220 50 Sh
Cone 51 M16x1,5 1750
137245 320 60 Sh
137247 420 70 Sh
CONE TYPE 50 CONE TYPE 51 CONE TYPE 100 CONE TYPE 200
M 36
M 24
max. leveling 10
max. leveling 20
10
69
69
35
15
130
95
170
11 11
150
R
12 R1
,5 2,5
15
25
15 22
110
135
110
135
90
90
A A A A
Ø 120
Ø 90
200
150
110
Ø120
Ø 175
300
240
150
85 85
110 110 150
200 180
250
44 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
ANTI-VIBRATION
MOUNTS
1000 1000
800 800
700 700
600 600
h
0S
500 500 17
e5
Carga (Kg)
Co
Load (Kg.)
Con
(Kg.)
400 ne
51
Load(Kg)
70 400 h
0S
Co C one Sh h 16
ne 50 70S on e5
300 51
Carga
70 300 0 C
60 Sh e5 h
250
Co
ne Sh Con h 15
0S
Co 50 250 0S e5
ne 60 506 C o n
51 Sh e
200 50 200 Con
Co Sh Sh
h 40
Co
ne
50 50S 51
150 ne 50 150 e 50 Cone
51
40
Sh Con
Co Sh h
ne 0S
50 04
40 e5
100 Sh 100 Con
80 80
70 70
60 60
50 50
40 40
30 30
25 25
8 9 10 11 12 13 14 16 18 20
1 1,5 2 3 4 5
frecuencia propia Hz
Natural Frequency (Hz) Flecha (mm)
Deflection (mm)
7000 7000
A
0
20
6000
NE
6000
CO
B
0
5000 5000
20
E
N
O
C
4000 4000
CO
3500 NE 3500
C
20
0
(Kg.) (Kg)
20
3000 0 3000
A
E
N
O
C
Carga(Kg.)
2500 2500
Carga
CO
(Kg)
NE
Load (Kg.)
Load
Load
2000 20 2000
0
B
1500 1500
CO
NE
20
0
C
1000 1000
800 800
700 700
600 600
500 500
1 1,5 2 3 4 5 6
7 9 12 15 20
Flecha (mm)
Natural Frequency (Hz) Deflection (mm)
Frecuencia (Hz)
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 45
CAB MOUNT
DESCRIPTION
The AMC MECANOCAUCHO® cabin mount is composed of two
main metal parts. Both metal parts are bonded to a high resilient
rubber for optimum vibration isolation.
TECHNICAL CHARACTERISTICS
• This mount incorporates two bump shaped profiles in order to
absorb dynamic loads or shocks. This feature is specially interest-
ing for restricting the motion of the cabin under transient shocks.
• The metal parts are corrosion protected to cope with arduous
environments on land or marine applications. RoHs compliant.
• The AMC MECANOCAUCHO® cabin mount can be manufac-
tured in other different rubber compounds in order to be suitable
for different weight of cabins.
• Our technical department can give the correct recommenda-
tion in order to overpass ROPS tests on construction equipment
machinery.
APPLICATIONS
For the effective isolation of vibration and noise on cabins for the
following purposes:
• Agricultural Tractors.
• Construction equipment machinery
CABINE MOUNT 75 CABINE MOUNT 80
• Off road vehicles. + Anti-rebound Washer + Anti-rebound Washer
Ø 75 Ø80
Ø47 Ø32
Ø16,5 Ø16,5
29
15 21
19 16 21
40
57
56
64
18
15
20
8
15
Ø 55
Ø16,5
Ø 75 Ø59
Ø80
A A A A
Ø 79
Ø 74
Ø 34
Ø 16,5 Ø 104,2 ±1
Ø 99 ±1
Ø 16,4 ±0,3
21
46,8 ±0,2 1
40
16 22±1
58
20 21
16
3
54
Ø 59
Ø 29
Ø 74,6 ±0,3 (TAKEN AT MAX. Ø)
A A
A A
46 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
ANTI-VIBRATION
MOUNTS
- Assembly 1 - Assembly 2
Suspended unit
Anti-rebound
washer
Chassis of the
Anti-rebound washer machine
137371 140 16 45 Sh
608074 16 175 76 16,5 5
Cabin Mount 137372 220 16 60 Sh Cabine Mount 75
55,5 20 328
75 137373 140 20 45 Sh washer
610027 20 175 76 20,5 5
137374 220 20 60 Sh This washer is
mandatory to
137353 200 16 50 Sh be a Fail-Safe
606482 16 237 90 18 5 System. The
COMPRESSION LIMITER WASHER
ANTI-REBOUND WASHER
60 16 616 the washer
80 137351 200 20 50 Sh washer
depends
606486 20 237 90 20,5 5
137352 300 20 60 Sh on the
application.
137322 75 16 45 Sh Please contact
606482 16 237 90 18 5 us, if you
Cabin Mount 137323 150 16 60 Sh Cabine Mount 85 have any
60 16 300 question. The
85 137313 75 20 45 Sh washer
Cab mounts
606486 20 237 90 20,5 5
75 and 80
137311 150 20 60 Sh
include an
137301 190 16 45 Sh anti rebound
washer.
137318 250 16 50 Sh 611167 16 325 110 16,5 5
137319 350 20 60 Sh
Washers should be used, if the rubber surface is not covered with the contact
surface. Washers upon request.
NATURALFRECUENCIA
FREQUENCY PROPIA A PROPIA
FRECUENCIA MC A MC LOAD DEFLECTION
CURVAS DE CARGA
CURVAS GRAPH
DEFLECHA
CARGA FLECHA
MECANOCAUCHO® ®Tipo Cabmount
MECANOCAUCHO® Tipo Cabmount MECANOCAUCHO® Tipo Cabmount
AMC MECANOCAUCHO TYPE CABINE MOUNT AMC MECANOCAUCHO
MECANOCAUCHO® TYPE
Tipo
®
CABINE MOUNT
Cabmount
400 400
400 400
Ca Ca Ca
Ca b b
b
60
b M
60
M M ou M
ou
5
ou
5
ou
10
nt nt 300
10
nt
60
8
nt
80
nt
10 0
ou
80
1
ou
80
Ca Ca 5 0 6 60
M
5 0
50 M
60 Cab
nt
Ca 250
nt
b
ou
b
50
ou
Ca
M M b
M
10 C
M
M
05
ou ou M
b
ou
b
ou
1
Ca
nt
Ca
nt
nt
nt
nt
10
ou
50
ou
b 5 80 80
M
b 5
M
0
80
8
M M 50 5 5
45
5
b
45
ab
0
nt
0 0
Ca
nt
ou ou
C
ou
05
ou
05
nt nt Ca
1
M
Ca
t1
M
150 10
nt
10
60un
150
b
150
b
b b 150
60 ou
Ca
Ca
Ca 5 C 5
75Mo
60
M M
85 b M
45 ab 45 ou ou
60
b
75
nt b
nt a
M M nt nt
Load (Kg.)
85
ou C
ou C
nt
ou ou 85 85
ou
nt
nt nt
M
M
ou
75 75 6 0 60
b
b
M
Ca
Ca
60 60
b
b
80 80 Ca
Ca Cab
80 80
Ca b
45
45 5
b b M
70 70 M Mo
85 5 4
ou 70 70
M
75
45
ou un
nt t 7
ou nt
nt
5
nt t
ou n
nt
8
60 85
ou
60 8
M ou
60
nt
75 75 5 60
M
b M
ou
4 45
b
45 5
Ca ab
45
M
Ca
C
b
50 50
Ca
50 50
40 40 40
40
30 30 30
30
10 1012 12 15 1518 18 22 22
25 25 1 11,5 21,5 23 43 4
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 47
CB
DESCRIPTION
The AMC MECANOCAUCHO® type CB mounts are installed in
pairs. Installation is simplified as both mounts fixed with one
through bolt and a washers at each end.
The mount is provided with a built in wear plate that prevents the
elastomeric element from coming in contact with sharp edges of
support frames or structures that may cause friction in traditionally
used semi bonded mounts. Therefore with these mounts there is no
need to machine radii or chamfer holes.
The specific design of the mounts permits high dynamic loads
whilst limiting the movement due to the multiple axial snubbing
design.
TECHNICAL CHARACTERISTICS
• The AMC MECANOCAUCHO® Type CB is radially 30% sof-
ter than axially. This feature is specially interesting for those
machines or equipments where radial axis vibration isolation is
important.
• The mount is provided with a built in snubbering system that
allows the following elastical courses:
Vertical: +/- 6 mm
Horizontal: +/- 3mm
• The mount can be supplied in two different sizes and in diffe-
rent hardness compounds to accommodate applications from 30
to 550 Kg per mount.
• Metal parts are embedded in rubber in order to prevent corro-
sion.
APPLICATIONS
• Agricultural or construction equipment cabins, engines, radia-
tors, transmission, battery boxes.
• Marine equipment
• Mobile Generators or compressors.
• Chassis frames for Military, Bus, Truck, Motorhome and
Emergency vehicles.
+ 3mm
0,7
-
+ 6mm
-
48 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
ANTI-VIBRATION
MOUNTS
F
E B
D T
C
Washers should be used, if the rubber surface is not cove-
Q red with the contact surface.Washers upon request.
NATURAL
NATURAL FREQUENCY
FREQUENCY LOAD DEFLECTION
LOAD GRAPH
DEFLECTION CURVE
AMC MECANOCAUCHO® DYNAMIC TYPE
AMC-MECANOCAUCHO® TypeCB CB AMC MECANOCAUCHO® TYPE CB
AMC-MECANOCAUCHO® Type CB
600 600
65
CB
500 500 0
11
11
CB
0
65
400 400
55
CB
0
11
11 B 8
CB x
0 06
300 300
C
a
CB
55 5
Tm in
80
250 250 5
6 Tm
65
0
8 65 65 45
Tm
CB 60 80
T m CB
200 200 1 0
ax
CB
1
in
B
CB C CB min
11
T
0
55
60
45
150 150
x 0
55
a 8
Load (Kg.)
Load (Kg)
Tm CB
(Kg)
ax
Load (Kg.)
5
0
5 5 Tm
8 5 45
Load
60
CB
100 100 CB B 80
CB
80
C
in
45
80
CB
80
Tm
CB
Tm
45
80
70 70
60
ax
45 80
45
65
60
60 60 CB
Tm
CB
in
50 50
40 40
CB
60
30
45
30
25 25
20 20
8 10 12 14 16 20 1 1,5 2 2,5 3,5 4
frequency
Natural Hz(Hz)
Frequency Deflection (mm)
Deflection (mm)
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 49
TF
DESCRIPTION
The AMC MECANOCAUCHO® TF type anti vibration mounts are C
C
made of two moulded parts. One of circular fully moulded rubber,
and one circular part which is fully bonded to a centre tube which
D
acts as a guide for the machine anchoring bolt. They are installed
E
D
E
pre-compressed on the actual machine frame, whose thickness “E”
determines the degree of pre-compression of the assembly. B
B A A A
TECHNICAL CHARACTERISTICS A A A
T
Q
ASSEMBLY INSTRUCTIONS
T
The TF mounts should be assembled according to the following
installation instructions. There are two possible configurations, see B
assembly 1 and assembly 2, for which the recommendations given B
in the following chart must be observed. They can be installed in
plates of different thicknesses according to the Tmx and Tmin values
given in the Table provided. The Load vs Deformation curves will vary
according to the plate thickness in which the mount will be installed.
APPLICATIONS
• Vehicle cabins
Washers should be used, if the rubber surface is not covered with the contact
• Construction equiment machinery and agricultural vehicles, etc. surface. Washers upon request.
TF
10
1
TF TF
0
0
70
70
TF
TF TF
10
10
TF 60
70
TF
70
0
5
10
60
5
10
10 10
5
300 TF
70
300 300 TF
70
300
50 5 0
0 0
10 10
TF
TF
TF
TF0
10
250 60
10
5
5
5
10 10
6 0 1 00
60
TF
TF
TF
TF
10
0
50
50
200 200
Load (Kg.)
Load (Kg.)
200 200
5 50 50
10 5
10
TF TF
TF
TF
TF
TF
10
TF
TF
10
60 60 40 40
55
10
55
10
55 0 0
50
55 10
0
50
60
100
0
150
60
150 TF
40T
TF
40
150
TF
150 TF TF5 4 40
F
10
10
5
10 10
5
TF
40
TF
40
100 100
100 100
80 80
80 80
70 45 45
TF
70 55
TF
55
70 TF
55
70 TF
55
45
45
60 60
60 60 56 56
50 50
50 50
40 40
40 40 0,5 0,5 1 1 1,25 1,25 1,5 1,5 2 2
12 12 15 15 18 18 22 22 25 25
Deflection (mm) (mm)
Deflection
Natural
Natural Frequency
Frequency
Natural (Hz)
(Hz) (Hz)
Frequency Deflection (mm.)
50 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
ANTI-VIBRATION
MOUNTS
SCB
DESCRIPTION
The SCB elastic mounts are elements that work on the basis of com-
pression since thanks to their design and assembly they provide an
anti-rebound effect, thus permitting safety assemblies.
ADVANTAGES
• Easy to install
• Simple and economical product.
• Wide range of loads.
Their failsafe feature makes them very recommendable for mobile
applications.
A
C
F
B
A A
D
Washers should be used, if the rubber surface is not covered with the contact surface.
Washers upon request.
138013 30 45 Sh SCB 20
28 10,5 2 606185 0,03
WASHER
SCB 20 27 15,5 10,25 20 7 19,5 5 4 20 1
138019 38 60 Sh
SCB 20i
28 8,5 2 606124 0,03
WASHER
SCB 35
28 8,5 2 606124 0,03
WASHER
SCB 35 27,5 12,5 8 19,4 8,5 19 4 3 30 0,5 138012 25 45 Sh
SCB 38
38 12,5 3 611065 0,04
138043 50 60 Sh WASHER
SCB 65
66 16,5 5 606130 0,125
WASHER
SCB 65 62 43,5 16,5 40 17 39 20 19 140 3 138005 250 60 Sh
SCB 95
95 22 6 608101 0,31
SCB 95 92 51,5 20,5 56 26,5 54,5 20 19 395 3 138011 1000 65 Sh WASHER
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 51
ASSEMBLY
F
R R T
Load (Kg.)
6 S SC 38 38 6
50 50 0 0 60 60 60 B 40 40 6
SC SCB SCB C6B0 0
40 40 45 45 2S5 5 6
B B2
SC SC 35 SC SC
30 30 35 0
SC B
SC20 B 20 i 6 i 60
25 20 0
25 B B 6 6 25 25 B CB 2
SC 20 i SC 200i - S 0 - S
C
20 20 - S - S 45 45 5 5
B 45 B 45 CB CB 20 20 60 0 60B 20B 20 5 435 4
35 35 20B 2SC SC 3
B B
15 15 45 20 20 B
45 i6 i6 15 15 SC SC SC SC
0 0
10 10
10 10
8 8
5 5
3 3
3 3
16 20 25 30 40 50 60 75 90 0,1 0,2 0,5 1 1,5 2 2,5 3
16 20 25 30 40 50 60 75 90 0,1 0,2 0,5 1 1,5 2 2,5 3
Natural Frequency Hz Deflection (mm)
Natural Natural Frequency
Frequency Hz (Hz) Deflection
Deflection (mm)
(mm)
52 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
ANTI-VIBRATION
MOUNTS
SCBR
DESCRIPTION SECTION A-A
A
The SCBR elastic mounts are elements that work on the basis
of compression since thanks to their design and assembly
they provide an anti-rebound effect, thus permitting safety
assemblies.
SECTION A-A
SECTION
A-A A-A
SECTIONA-A
Moreover it contains a metallic part, that avoids a premature A SECTION
B
A
wear by friction between the rubber and the housing of the A
F
mount.
BB B
27
F
ADVANTAGES
FF
The inside stop effect makes them very recommendable for D
safety purposes. A A D
A D
A D
• Easy to assemble.
• Simple and economical product.
• Wide range of loads.
F
F
T
T
T
Q
Q
C C Q
C
A
A A
Versión Modificación-Aldarazpena-Modification Real-Egina-Done Fecha-
Washers should be used, if the rubber surface is not covered with the contact surface.
Name Eskala
C
Schale
Material Referencia-erreferentzia-Part Number
(mm) (mm) (mm) (mm) (mm) (Max.) (Min.) (gr.) (kg) (mm) (mm)
Nombre-Izena-Name (mm)
G.Aristi (kg)
Fecha-Data-Date 10/10/12
35
30 35
30
SC
BR SC
Load (Kg.)
Load (Kg.)
25
38 BR 45
25 25 38 45
45 38 25 B R 3 8
4
20 5 SCCBR
20 20 S
20
15
15 15
15
10
10 10
10
8 8 8
8
5 5
4 4 4 4
24 25 24 25 30 30 40 40 50 50 60 60 75 75 84 84 0,10,1 0,20,2 0,05,5 11 1,2
1,2
Natural Frequency
Natural Natural Hz
Frequency Hz
Frequency (Hz) Deflection
Deflection(mm.)
Deflection (mm)
(mm)
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 53
ECCENTRIC
BUSHINGS
DESCRIPTION
On the eccentric bushings the center points of the inner and outer
cylinders are not the same. As a result it is more flexible in the direc-
tion of the main load and it keeps the same control in the other
direction.
The eccentric bushing is available in two hardnesses, 45 and 60 sh.
TECHNICAL CHARACTERISTICS
• Optimal vibration damping and isolation. AA
• Fit to use for robust and safe constructions.
• Simple installation and application.
APPLICATION
The AMC MECANOCAUCHO® eccentric bushing is best suited to the
D
D
d
C
d
C
following situations and applications:
• Tilting cab suspension.
• Suspension arms.
AA
I I
LL
SECTION
SECTIONA-A
A-A
Type d (mm) C (mm) D (mm) I (mm) L (mm) Weight (gr.) Code Shore Max. Load (kg)
154161 45 Sh 110
MINI 16,2 6,1 48 50,5 64 311
154163 60 Sh 180
154159 45 Sh 200
SMALL 24 10,5 75,3 50,8 68 554
154158 60 Sh 390
154154 45 Sh 290
LARGE 43,7 9,5 101,6 63,4 72,4 1096
154155 60 Sh 510
154181 50 Sh 290
154182 55 Sh 350
100 HD - - - - - 1046
154183 60 Sh 430
154184 70 Sh 565
100 RD - - - - - 1558 154175 50 Sh 450
AMC MECANOCAUCHO ®
NATURALLOAD
FREQUENCY
NATURAL FREQUENCY CURVE LOAD DEFLECTION
AMCGRAPH
MECANOCAUCHO®
AMC MECANOCAUCHO® ECCENTRIC BUSHING AMC MECANOCAUCHO ®
ECCENTRIC
LOAD DEFLECTION BUSHING
CURVE
600
500 h
La 0S
500 10
rg
e e6
60 rg
0
RD sh La h Sh
400 0S 50
400 50 ll 6 D Sh
s h
Sm a 0R 60
10 al
l6 Sm 10 HD
0 0s 0
300 La HD h
300 10
rg
10 e 60
255 h Sh
0 45 sh
5S 55
e4
250 HD s h D
55 rg 0H
La 10
sh 200 Sh
200 10 45 Sh
0 h all 50
HD M
in 6 0S Sm D
50 i ni 0H
60 150 Mi 10
Load (Kg)
sh
Load (Kg.)
Load (Kg.)
150 sh
M Sh
in
i 100 45
100 45 ni
s h Mi
80 80
70
Sm
60 al 60
l4
5s
50 h 50
40 40
30 30
6 7 8 10 12 15 17 20 23 1 1,5 2 3 4 5 6 7 8 9
NaturalFrequency
Natural Frequency (Hz)
(Hz) Deflection
Deflection (mm) (mm)
54 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
ANTI-VIBRATION
MOUNTS
100 RD 100 HD
A
A
+0,1
Ø 32 0
Ø 100 +0,264
11,5
0
Ø20,5 ±0,3
RUBBER
HARDNESS MARK
A BOTH SIDES OF 49,3
THE MOUNT 55
AA +0,1
Ø 32 0 85
SECTION A-A
SECTION A-
38,95
A
100,5 ±0,5
85 ±0,3
71 ±1
61,55
RUBBER
HARDNESS MARK
A 71 ±1 BOTH SIDES OF 11,5 49,3
THE MOUNT 55
85
85 ±0,3
SECTION A-A
SECTION A-A
Ø20,5 ±0,3
Ø 100 +0,264
0
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 55
SCH
DESCRIPTION
The AMC MECANOCAUCHO® SCH type mounts are made of two
parts of rubber, one of which bears an inside metal bushing which
acts as a guide through the machine anchoring screw.
It is installed pre-compressed on the actual machine frame, whose
thickness “T” determines the degree of precompression. - Assembly 1
TECHNICAL CHARACTERISTICS Anti-rebound washer
This antivibration mount is ideal for applications of major dynamic
loads where movement control is necessary, such as in the cabins of
all types of mobile vehicles. It also offers optimal stability, as well as Suspended
good attenuation of impacts and vibrations. unit
APPLICATIONS
• Vehicle cabins.
• Public works and agricultural vehicles, etc.
ASSEMBLY INSTRUCTIONS
The SCH mounts should be assembled according to the following
installation instructions. There are two possible configurations, see Chassis of the
assembly 1 and assembly 2, for which the recommendations given in - Assembly 2
the following chart must be observed. They can be installed in plates
machine
of different thicknesses according to the Tmax and Tmin values E
given
in the table at the bottom. The Load vs. Deformation curves will vary
according to the thickness of the plate on which the mount is to be Suspended G
installed. unit
A
Chassis of the
E
B machine
G
A
E
B G A A
D
Anti-rebound washer
A
E B A A
E
D
G
C
R R
T
A
F A A
D
B C R R
T
F
C B Q
E
B
C
Q
A AWashers
R R
T
should be used, if the rubber surface is not covered with the contact surface.
F
D
138501 45 Sh 80
R R
T
SCH 50
SCH F WASHER
611080 0,051 54 12,5 3
20 31 19,5 10,5 20 13,5 49 30,5 14 12,5 153 1,5 138504 60 Sh 130
50 C
B Q 138522 75 Sh 210
SCH 65
138502 45 Sh 120 606130 0,125 67 16,5 5
WASHER
SCH
23 39,5 24 15 23 17 63,5 38,5 22 19 350 2,5
65
138505 60 Sh 260
138514 50 Sh 650
SCH SCH 125
32 64,5 32,5 22 32 27 125,5 64 32 25 1440 3 610123 0,58 125 25 8
125 WASHER
138515 60 Sh 800
56 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
ANTI-VIBRATION
MOUNTS
0 T0 T
SC 1
700700 700
700 5 65 60
H
6 2
H 25
5 6 1
SC
H 12 x
SCH 1
12 25
12 6
SCSCH a x in n
H 1 Tm m i
H 25
Tm ma
5 0T
SCSCH
12 60
60 m
600600 600
SC 1 25 0 T
5
Tmax
5 2 5
H
SC
60 m
12 25 1 2
H 25
SCH 1
H 1
T
ax
H 1
12 50 T in
SCSCH SCSCH
m
5 T min
in
1 5
in
5 0 ma
500500 500
500
Tm x
50 m
x
ax
mamax
SC
SCH
0T T
0 60 60 in in
H0
SC
SCH
Tm m
9
9
9060
60Tm
SS
9060
0
9 0
HH9
Tm x
60Tm
SCSC
a
ax
Tmin
in
300300 300
300
axax n
mimin in in
axax TmTm
SC
SCH 9
250250 250
250 TmTm 06T0 T
SC
TmTm
SC
4545
SCH 9
SCH
6060 6
H 04
5
4 45 5
6 5 0
9 0
H 04
6565
H
90 5
90 0 HH6 HH 9
6
90 5
6560
HH HH9
5
SCSC SCSC
45Tm
SCSC
45Tm
SCSC
60Tm
Load (Kg.)
Tmax
Load (Kg.)
Tmin
Tmax
ax
200200 200
200
in
SC
ax
SCH
H 65
65 60
60 T m
Tmin
in
150150 150
150
x x
mama
SC
SCH
06T0 T n
mimin axax
SC
SCH
6
H 0
0 T0 T TmTm
SC
50 0
SCH 6
5
50 60
H 50
TmTm
H 54
SCH 6
60 Tm
C
S S 5 65 5
HH HCH 6
65 5
4545
60 Tm
H 54
Tmax
SCSC C 5 5
65 5
SS
45 T m
Tmin
6
HH6
ax
100
100
45 Tm
100100
SCSC
Tmax
in
Tmin
ax
in
80 80 8080
x x
SC
SCH 5
mama
SC
SCH 5
H 04
54T5 T in in
50 5
7070
H 04
70 70 4
5050 TmTm
50 5
45 T m
HCH 40545
45 Tm
T m ax
C
SS 550
Tmin
ax
60 60 6060 HH
SCSC
in
50 50 5050
40 40 4040
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 57
SCHR
DESCRIPTION
The AMC MECANOCAUCHO® SCHR type mounts are made
of two parts of rubber, one of which bears an inside metal
bushing which acts as a guide through the machine ancho-
ring screw. It is installed pre-compressed on the actual
machine frame, whose thickness “T” determines the degree
of precompression.
Moreover it contains a metallic part, that avoids a prema-
ture wear by friction between the rubber and the housing
of the mount. G G
AA
TECHNICAL CHARACTERISTICS
T
T
A
A
This antivibration mount is ideal for applications of major
dynamic loads where movement control is necessary, such Armure
Armure
as in the cabins of all types of mobile vehicles. It also offers extérieure.
extérieure. Q
optimal stability, as well as good attenuation of impacts and
C
C
vibrations. B B
D
D
APPLICATIONS
• Vehicle cabins
E
E
Armure
EXTERNAL
ARMOR
extérieure. Q
C
B
D
138623 60 Sh 80
138535 45 Sh 80
SCHR 50 20 31,7 19,5 10,5 20 13,5 49 31,8 14 12,5 153
138534 65 Sh 150
ASCHR 65 23 39,5 24 15 23 F
16,75 64,5 40 22 19 269
138551
138552
50 Sh
65 Sh
160
300
138547 45 Sh 260
SCHR 90 25 56,5 31 17 25 23 88 57 29 25 675
138548 60 Sh 450
Washers should be used, if the rubber surface is not covered with the contact surface.
Washers upon request.
Type Code Weight (kg) Øext (mm) Øint (mm) THICKNESS (mm)
58 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
ANTI-VIBRATION
MOUNTS
- Assembly 1 - Assembly 2
Suspended
unit
Chassis of the
machine
Chassis of the
machine Anti-rebound washer
NATURAL FREQUENCY
NATURAL FREQUENCY LOAD DEFLECTION GRAPH
NATURAL FREQUENCY LOAD
LOADDEFLECTION
DEFLECTION
AMCNATURAL
MECANOCAUCHO ®
FREQUENCY
MECANOCAUCHO® SCHR TYPE R
Type Type
SCH AMC MECANOCAUCHO
LOAD
®
SCHR TYPE
DEFLECTION
MECANOCAUCHO® SCH R MECANOCAUCHO®
MECANOCAUCHO® type
type SCH R
SCH R
2000
MECANOCAUCHO® Type SCH R MECANOCAUCHO® type SCH R
2000 20002000
2000
SC SC
2000
SC
in
mmin
H H
x==TT
H
R R
maax Tmin
R
14 14
1500 0
0 =
40 6 Tmax
0 0
R1
60 60
1500 1500
60
HR
H 0
SSCC 140 6
Tm
Tm Tm
HR
ax
ax ax
SC
=T
=T =T
10001000 minin in
x=TTm0 TmTmin
m
1000
m m
1000
Maax=25 56 6in0 in
in
in Sin
800 800
C
800 25 60 mSaC
H
R 125
R
SC SC S S 12 12
1a x
H
25
700 700
1
800 S m
H T a in
H SHC SCCH CH5 5 5 5
60
SC
25 1 a 2a m = = S
SC
H amxin
Tm in ma ax
a
m
ax S SCRH1R2125 0 Tm
T
600 500
x
0
40x 5x
Tm
R
m T Tm
x
H H
500 HH 5
m
R R
45 0
SCSC R 125
1
0T
0
500 90
SC SC in
x in
H SC
6
500 400 90R Tma
CH Tm
R
0m in CH
5
H HSC SC
500 SR 0 0 6T S
90 HR
H
T
R R H H
SC R 90 6 9
R 60
5
400
x=
60 9
in Tm TmC
400 H S T
x
SC 0
5
H
T m 60
400 SC R 90 6
60 6900 90
n
400 min
x
ax Tm
300
Tm T6m0 60
H 5T
i
SCax
n
5 6 min
n
300
ax aTxmCHTm
300 ax R 6 65 T n
Tm
i
m H
n
250 5 mi
H
6 x T C 65
300 min
SC SC HR HR
300 65 ma 5
0 4 ax
S
in
R
HR 5 T R 9 Tm x HR 5T 5 T in
S
90
SC R 65 6
250 250
H H 90 90
04
C
R 9 5 Tm
H
45
a
SC SC
9 m H H
SC SC SC SC H 5 H 5 H 5 H 5
9
5 M 90
9
R
SC R 900 645 T x 65 TM
0
H H H H
5T
5
HR
9
200
5
250
45
R
ax
200 SC R 90 4
65
H
SC 65 65H 5 65 H65
SC HR 5 TR a0 Min
Tm TSm in SiCn
5
65 65SC 65 S6C5
C M
Tm
Tm
S CH 6C T H
5
H Tm Tm
S 50 S5 H M0ax65
R
ax aHx
in
R
in
ax
5RTm5ax TM min
6 x x T n nT
HR
C
200 0 T 50 655 50 T
5
SC R 5S50C56H
m
65
150
R
150
R
a
SC SC SC SC
H 6 Hm RaxR 6 in
Load (Kg.)
65
SC SCmaSC SC in
Tm
m
SCCHR S0CT Tm
0 T 0T
H
Load (Kg.)
5 SCax 65 50 min
H
150
65 m 6m5
a
150
50
S
in
R R 6 6
65 TmHR 50 T
R
65 65 5 5
T
H
R
0 0 0 0
150 0
m
100 H 5
65
SC R 65 SC R 65
65 65 65 65
5
ax
i
H H
0 0 T T CH
x
50
H
R
H
Tm Tm T m T m
SC
T
100 SC ax
5
100
m m in in 5
i
T m
80
ax ax in in
a
Tm
m
R
T
x xSC
50 50 S
in
70 x
80 ma Tm
m
80
100 45
T
60 Tm x
in=Tma
H
60 50 in
m
70 80 35
x5 Tm
R
70 HR
80 0 a4 Tm n=
5
SC R
SC SC 0 4 0 4
m
R
T5
70 50 5 H 60 i
45
60 4HR ax in
SC SC
80 SC 5 0 Tm
H
60 0C
70 R 5S 5 Tm Tm
R
45
Tm
3
H H
H
SC R 50 4 50 45 min ax R 5 6
50 50 min min
H
60
R R
Tm
ax
70
R
50 T TmCH 3
5 5
60 50 40 H R
SC SCH 50 45
in
5
in= S H R
Tm Tm
4
5 5
60 50 HR m
SCmax
5
T
T T
C
ax ax
SC
50 40 S 45
40 30 T x
H
35 in=Tma
R
50 R
35
40 H T m =
SC SC
n
SC 45 mi
60
40 25
30
H H
35 5 T
Tm
30
R R
40 R 54
a
35 35
x=
25 30 20 H 3
SCH R
60 60 SC
Tm
30 25
Tm TmHR
in
25 SC
ax ax 35
30 20
=T =T 45
25 20 15
m m Tm
in in a
25 20
SC SC
20 15
15
H H
R R
20
x=
15 10
35 35
Tm
45 45
15
Tm Tm
10
Deflection (mm)
ax ax
15 10
=T =T
11 12 16 20 25 30 35 40 45 50
m m
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 59
DSD
DESCRIPTION
AMC MECANOCAUCHO® DSD mounts design provides excellent radial and axial flexibility making them most suitable for the suspension of
machines where isolation of both vertical and horizontal vibration components occur.
DSD mounts comprise of two flat metal parts. Top metal part is circular with either a tapped central hole or interior welded nut for attachment
to the machine frames. Lower metal part has an oval contour with two machined holes, one at each end, to securely attach the mountings to
the support structure for the machine.
TECHNICAL CHARACTERISTICS
DSD mountings comparable stiffness vertically and horizontal making them very effective against random vibrations in either plane.
APPLICATIONS
DSD mountings are particularly suitable for applications with low to medium dynamic amplitudes which enables the mountings stiffness rates to
provide effective isolation .
Suitable for HVAC, Ventilators, rotating pumps, torque or frequency converters, electrical engines, etc.
I
2xH
C
C
B
A
B
A A
D D
E E
G
I I
2xH 2x H
C
C
A
A
B
A A A A
D
E
D
E
F F
G G
60 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
ANTI-VIBRATION
MOUNTS
Type A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm) H (mm) I (mm) Weight (gr.) Code Load (kg) Shore
134028 4 45 Sh
DSD 40 + Bell 43 19 M-6 19 29 52 64 6,25 40 48 134029 10 60 Sh
134030 15 75 Sh
134031 15 45 Sh
DSD 60 + Bell 60 23 M-6 14 39 76 95 6,5 60,5 128 134032 25 60 Sh
134033 45 75 Sh
134034 75 45 Sh
DSD 80 + Bell 86 27 M-8 25 65 100 120 8,5 85 232 134035 110 60 Sh
134036 150 75 Sh
134037 90 45 Sh
DSD 100 + Bell 100 28 M-10 22 67 124 149 10,5 103,5 465 134038 160 60 Sh
134039 220 75 Sh
134040 130 45 Sh
DSD 150 + Bell 150 37 M-14 34 114 182 214 12 155 1110 134041 250 60 Sh
134042 350 75 Sh
134043 500 45 Sh
DSD 200 + Bell 200 44 M-18 35 140 240 280 15 208 2736 134044 825 60 Sh
134045 1250 75 Sh
Type A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm) H (mm) I (mm) Weight (gr.) Code Load (kg) Shore
134001 4 45 Sh
DSD 40 43 17 M-6 19 29 52 64 6,25 24,5 28 134002 10 60 Sh
134003 15 75 Sh
134004 15 45 Sh
DSD 60 60 21 M-6 14 39 76 95 6,5 32 73 134005 25 60 Sh
134006 45 75 Sh
134007 75 45 Sh
DSD 80 86 25 M-8 25 65 100 120 8,5 51 130 134008 110 60 Sh
134009 150 75 Sh
134010 90 45 Sh
DSD 100 100 25 M-10 22 67 124 149 10,5 54 262 134011 160 60 Sh
134012 220 75 Sh
134013 130 45 Sh
DSD 150 150 34 M-14 34 114 182 214 12 76 664 134014 250 60 Sh
134015 350 75 Sh
134016 500 45 Sh
DSD 200 200 40 M-18 35 140 240 280 15 128 1615 134017 825 60 Sh
134018 1250 75 Sh
NATURAL FREQUENCYPROPIA A MC
FRECUENCIA CURVAS DEGRAPH
LOAD DEFLECTION CARGA FLECHA
FRECUENCIA
AMC MECANOCAUCHO ® PROPIA A MC
DSD TYPE CURVAS DE CARGA FLECHA
MECANOCAUCHO® Tipo DSD MECANOCAUCHO®
AMC MECANOCAUCHO ®
MECANOCAUCHO® Tipo
DSD DSDDSD
TYPE
Tipo
MECANOCAUCHO® Tipo DSD
1500 1500 1500
1500
DS 5
D
DS
07 75
20 D
20 D 20 200
0
1000 1000 75 0
75
1000 1000 DS DSD
D 0
06 60
SD D 800
800 SD
700
800 20 20 700
800
D 20 200
DS DSD
700 0 0 700
60 60
600 600 600 600
DS DS 45 5
00 00 4
500 500 D 500 500
D
20
0
20
0 S D 2 5D 2
400 400 45 400 400 D D7 S 75
D 45 D 50 50
SD
D1 D1
SD
DS0 7D5S 75
300 15 15 300 300
300 0 0
75 75 0 00
250 250 DS D D 250 250 D1 D1 60 60
D SD
S DD
D SDS DS DS DS 5 550 50
200
0 7 80D71 D 1
200 200 15 80 15 D8 D 200
0 01 10 8
60 75 0 60 7050 S S
75 0
75 0 S0D SDD D
150 150 150 0 6 D6 D 04
5 45
10 100
150 D D
DS
15 150
DS SD SD
D D D
DS DS
D 10 10 D D
DS DS
15 1
0 DSD50 DSD 0
60
0
60
100 100 45 4 100 100 0 0
80 5
0 6 80 6
80
DS 60 DS 60 0 45 0 45 8
SD DSD 80 4580 4
80 80 D D 80 80 10 D 10 5
D
Carga (Kg)
Carga (Kg)
D
Carga (Kg)
(Kg.) (Kg)
DS DS
70 70 DS DS 10 10 70 70
0 0 D D
60 60
D
80
D
80 45 45 60 60 DS DS
Load Carga
45 45
Load (Kg.)
50 50 50 50
5 5
D D 0 7 60 7
40 40 SD SD 40 40 D6 D
60 60 DS DS
75 75
30 30 30 30
D D 0 60
0 6 60
25 25 SD SD 25 25
60 60
S D 6 SD
20 20 60 60 20 20 5 D 7 5 D
0 7 40
D 4 SD
D D D
SD
DS SD S
DS D 5 45
0 4 60
15 15 40 15 15
D 40D 6
60 750 4 75
S D 6DSD
40 0 D
D
10 D SD 10 0 60
0 6D 40
10 SD 10
40 40
D 4
S
DS D
60 60
5 5 5
5
DS 5
DS D 45 0 4
D
40 40
D 40SD 4
45
3
3 45
3 3 DS D
4 5 6 8 10 12 14 16 18 20 22 1 1,5 2 3 4 5 6 7
4 5 6 8 10 12 14 16 18 20 22 1 1,5 2 3 4 5 6 7
Frecuencia
Natural Propia Hz
Frequency Flecha (mm)
Frecuencia Propia Hz(Hz) Deflection
Flecha (mm)
(mm)
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 61
DRD
DESCRIPTION
The AMC MECANOCAUCHO® type DRD mounts have a low axial
and radial stiffness rate. Their design makes them ideal for those
machines that produce vibrations in the 3 directions. The architec-
ture of these mounts is similar to the DSD, but the rubber section
is greater, this feature makes them have a lower stiffness rates than
the DSD mounts. These mounts are particularly interesting for those
applications where an extra isolation is needed.
OPERATION AND ASSEMBLY
The design of the mount allows an easy installation. The top metal
part has an inside thread for securing to the machine, the baseplate
has 2/4 holes that allow an easy fixation to the frame. Oil anti-drip
hoods can be supplied on demand.
The DRD mounts by MECANOCAUCHO® have the following charac-
teristics.
• The metal parts are protected from corrosion by an electrolytic
coating for outdoor work. RoHs compliant.
• We engrave the rubber hardness on the metal parts.
APPLICATIONS
The DRD mounts are ideal for light machines at medium or low exci-
tation frequencies. A
• Compressors. C
G
• Air-conditioners.
• Ventilators.
B
• Vibrating Tables.
A
F
DRD 45
A DRD 65
C DRD 85
DRD 90
G
B
A A
F
D
E
D
E
A A
F
D
E
A A
G
D
E
62 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
ANTI-VIBRATION
MOUNTS
Type A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm) Weight (gr.) Code Load (kg) Shore
175081 20 45 Sh
DRD 45 33 25 M-8 66 85 2 8 70
175083 50 60 Sh
175001 40 45 Sh
DRD 65 52 35 M-10 92 114 2,5 10,5 170
175002 75 60 Sh
175003 75 45 Sh
175013 185 75 Sh
175021 130 45 Sh
175023 275 75 Sh
175031 280 45 Sh
175033 625 75 Sh
175036 380 45 Sh
DRD 170 100 84 M-16 160 200 4 14,5 2390 175037 750 60 Sh
175038 930 75 Sh
175041 1400 45 Sh
DRD 250 187 158 M-24 250 310 6 18,5 10400 175042 2500 60 Sh
175044 3150 75 Sh
NATURALNATURAL FREQUENCIES
FREQUENCY
NATURAL FREQUENCIES A MC
A MC LOADLOAD
LOAD DEFLECTION DEFLECTION
DEFLECTION
GRAPH GRAPHS
GRAPHS
MECANOCAUCHO®
AMC MECANOCAUCHO®
MECANOCAUCHO ®
DRDType
TYPE
Type DRDDRD MECANOCAUCHO®
MECANOCAUCHO®
AMC MECANOCAUCHO ® Type
DRDType
TYPEDRDDRD
4000 4000 4000 4000
5
75 0 7
3000 3000
0 5
25 D 2
DR
3000 3000
DR
D R
D
0
D
DR D 60 0 6
25
25
0
0
5
0
25 D 2
DR
75
DR
2000 2000
75
2000 2000 D R
D
D
DR D
25
25
0
0
1500 1500
60
1500 1500 5
60
75 0 7 5
0 7 45 0 4
DR
17 D 1 0 250 25
DR
0 6
D
D R 6 0 D RD
D
1000 1000
25
DR
DR
0
D
0
45
0 130 RD RD
D
45
17
800
17
800 800 3 D
DR
800 1 D
DR
D RD
75
700 700
75
D
700 700
DR D
D
17
17
600
DR
0
DR
6
60 D
0 DR
500 500
D
500 500 0
13
60 0 6
130
0
DR
DR
0 3
75
400 400
RD 70
13 D 1 45 45
75
400
D
400
D
D
13
1
70
13
D R 0
17
R 7
0
D 1
0
D 1
45
300 300
6
D
45
300 300
0
5 R5D R
75 5D7 45D 0 45
DR
Load (Kg)
75 0 7
250
DRRD
250
D
Load (Kg)
250
DR
250
DR
Load (Kg)
DR
50 8
(Kg.)(Kg)
0 9 0
D 85
9 0 86 13
D
90
3
DD
D RD 0 6 RD90 RD D 1 D
D
90 75
200 200
13
85RD
200
75
200
13
DR
DR D D 9 RDD D DR DR
75
0
Load (Kg.)
75 9
0
45
Load
45
DR D
90
150
60
5
Load
45 0 4
90 0D 9 60
DR R D
DR
DRD 45 0
DR
D
D
D 85
100 100 6 5
R
D
100
DR 85D D 8
100
DRD
90 6
D
90
856
65
D R
45
80 80
6506
80 80 R D
60
D 0
60 5 6
0
70 70 0
D
70 70
60 5 6
DR DR 4
5
RD RD
45 D 4 45 5 4
DR
60 60
65 D 6
DR
60 60 D 5
45 65
R 8 D8
D
D
45 65
R
D
D R D
8
60 45
50 50 D
DR D D R
85
60 45
50 50
D5
DR D
45
40 40 5
40 40 45 5 4
65 6
30 30 D RD
DR D
30 30
25 25 25
25
20 20 5
20 20 45 5 4
45 D 4
DR
DR
15 D R
D
15
DR D
15
45
15
45
45
45
10 10 10
10
3 5 10 15 20 22
05 25 1 2 3 34
3 5 10 15 1 2 54 6 5 68 108 10 15 15
20 20 30 30
40 40
50 50
Natural
Natural
Natural frequency
frequency
Frequency (Hz)Hz
Hz Deflection
Deflection
Deflection (mm)
(mm)
(mm)
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 63
MD
DESCRIPTION
The AMC MECANOCAUCHO® MD-type mounts have similar archi-
tecture to the BSB and BRB. The advantage of this mount is that it
is a high-damping elastic compound.
Its special mix affords it a high degree of antivibration isolation and
offers great stability to suspended equipment.
TECHNICAL CHARACTERISTICS
• Metal hood that protects the part from possible oil splashes.
• It has an electrolytic coating that protects the part from corro-
sion.
• They have an interlocking metal component that provides a
fail-safe protection for mobile applications. This device limits the
ascending vertical movement when the mounting is submitted
to shocks at traction.
APPLICATIONS
This mount has been specially designed to insulate engines that
produce high-amplitude vibrations.
Engines from 1 to 3 cylinders, Motor Pumps, Gen Sets,
Compressors, Ventilators...
K2
K1 C
18m
16m
14m
12m
Soportecaucho natural
10m
SoporteMD
io medidoen el motor 8m
6m
en el motor 4m
Autospectrum(Input1)
yzer 2m
Input : Input : FFT Analyzer
0
0 100 200 300 400 500 600 700 800
[Hz]
Soportecaucho
Natural natural
rubber mount
MDSoporteMD
mount
93
47
M12 76
0 600 700 800 Ø 64
14
Soportecaucho
m natural
34
9 ,5
SoporteMD
2,5
Ø
K2
K1 C
A A
93
76
K1= Main stiffness - K2= Secondary stiffness
Ø 64
400 500 600 700 800 K1= Principal stiffness
C= Damping K 2= Secondary
coefficient - m= Mass stiffness
14
[Hz]
34
80
70 C
MD
60
D
MD
Type Load (kg) Weight (gr.) Code 50
Load (Kg.)
40
A 130 238 135210
30
25
B 105 238 135212
20
C 70 238 135213 15
D 50 238 135219 10
1 1,5 2 3 4 5
Deflection
Flecha (mm)(mm)
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 65
AT
DESCRIPTION
AMC MECANOCAUCHO® AT mounts are specifically designed to
provide isolation for medium to high frequency applications.
The rubber section is fully bonded to two concentric tubular parts.
The inner metal is a plain tube design. The outer metal part is also
mainly tubular but has a manufacturing process Flanged effect at
one end with a variation in the number of attachment holes.
TECHNICAL CHARACTERISTICS
Type AT mounts have a radial to axial ratio of 4:1 , thus providing
good horizontal stability.
It is manufactured in three hardnesses to facilitate the choice of the
most suitable mount (Soft: hardness A 45, MediuMsized: hardness B
60 and Hard: hardness C 75).
APPLICATIONS
The AT elastic mounts can be used to great advantage for the vibra-
tion isolation of engines, piston compressors, presses, electric trans-
formers, mobile units, machines, on concrete buttresses, etc.
300 3000
250 75
21
2500 75
AT 81
AT 75
200 0
8
75 60 2000 AT 60
20 21 81
AT AT 1800 AT
45 60
150 21 80
75 60 AT AT
11 20 60 1500 45
AT 75 AT 11 81
02 AT AT
AT 75
5 71 75 60
100 60 04 45 AT 70 71 45
75 60 10 AT2 11 AT AT 80
01 T02 AT AT AT
80 AT A 1000 60
60 45 5 70 45
70 01 02 R7 AT 71
AT AT T70 AT
45 800 A
45
60
45 10 75 70
01 AT 51 AT
700 0
50 AT AT R6
70
600 60 AT
51
40 AT
75 5
75 500 50
60 R4
00 AT 75 70
AT 41 50 AT
30 AT AT 45
400 51
AT 60
25 75 75 1
4 45
31 40 60
60 AT 31 AT T50
00 AT AT A 60
(Kg)
(Kg)
20 AT 75 40
(Kg.)
(Kg.)
300
30 AT
45 AT
Carga
Carga
00 5
AT 250 45 14
Load
Load
15 31 T4
60 AT A
30
200 AT
45
40
10 AT
5 150 45
8 07 30
00 AT
AT 0
06
00
AT
5
04 100
5 00
AT
80
70
60
50
2
40
30
1 25
0,5 1 1,5 2 3 4 5 6 1 1,5 2 3 4 5 6 8 10 12
Flecha (mm)
Deflection (mm) Flecha (mm)(mm)
Deflection
66 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
ANTI-VIBRATION
MOUNTS
120 75 Sh
C
G 132107 85 45 Sh
AT 11 60 60 30,5 19 12,2 49 11 69 8,2 73 250 4 132108 120 60 Sh
132109 150 75 Sh
F
A
132110 100 45 Sh
AT 20 71 55 27,5 19 18,3 55,7 10 - - 344 1 132111 150 60 Sh
132112 180 75 Sh
132113 135 45 Sh
AT 21 round 70 70 38,5 20,7 18,3 55,7 10 80 8,5 86 437 1 132114 190 60 Sh
Fig. 2 132115 250 75 Sh
E 132116 135 45 Sh
I
AT 21 lugs 70 70 38,5 20,7 18,3 55,7 10 80 8,5 86 437 4 132117 190 60 Sh
132118 250 75 Sh
D
30°
132119 175 45 Sh
AT 30 91 75 29 28 20,2 65 16 78 8,5 522 2 132131 240 60 Sh
B
C
A A
132132 300 75 Sh
132133 250 45 Sh
AT 31 round 90 95 47 28 20,2 65 16 95 8,5 775 1 132134 350 60 Sh
G F 132135 420 75 Sh
H
A 132136 250 45 Sh
E
AT 31 lugs 90 95 47 28 20,2 65 16 95 8,5 107 780 4 132137 350 60 Sh
132138 420 75 Sh
D
132139 225 45 Sh
AT 40 round 100 90 42 28 22,2 74 18 100 8,5 112 789 1 132140 320 60 Sh
30°
B
132141 380 75 Sh
C
A 132142 225 45 Sh
AT 40 lugs 100 90 42 28 22,2 74 18 100 8,5 102.9 895 4 132143 320 60 Sh
132144 380 75 Sh
G F 132145 250 45 Sh
A AT 41 round 100 110 49 28 22,2 74 18 100 8,5 112 895 1 132146 360 60 Sh
132147 480 75 Sh
132148 250 45 Sh
AT 41 lugs 100 110 49 28 22,2 74 18 100 8,5 112 900 4 132149 360 60 Sh
Fig. 3 132161 480 75 Sh
E - 325 45 Sh
I
G
AT 50 120 100 47 33 40,2 86 20 114 8,5 1305 4 - 440 60 Sh
- 550 75 Sh
D
- 400 45 Sh
AT 51 120 120 63 53 40,2 86 20 104 10,5 1494 2 - 440 60 Sh
H
A
B
- 670 75 Sh
C
A A 132162 450 45 Sh
AT 70 lower 163,5 97 36 43,5 60,2 118 22 145 10,5 3124 2 132163 600 60 Sh
H 132164 800 75 Sh
F A 132165 700 45 Sh
E AT 70 163,5 140 66 46 60,2 118 22 145 10,5 3124 2 132166 900 60 Sh
I
G 132167 1100 75 Sh
132168 850 45 Sh
D
- 1250 45 Sh
C
Fig. 4 E
I
J
D
H
B
C
F
A
E
I
D
H
B
C
F
A
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 67
ATP
DESCRIPTION Load capacities shown in catalogue are the maximum Static values
with the capability of withstanding occasional extreme dynamic
AMC MECANOCAUCHO® ATP type mounts have been designed overloads .
to provide effective vibration isolation of medium to high frequency
applications in a variety of industrial machinery, gensets, motor ATP mounts have stiffness values 4 times greater in the radial plane
pumps, motor compressors, hydraulic units, etc. than the axial plane, providing effective resistance to transient lateral
shock loads.
The top metal part is cup shaped to protect the rubber section from
contamination by oil, grease, petrol, diesel, dust, etc. APPLICATIONS
TECHNICAL CHARACTERISTICS Suspension systems where it is deemed necessary to control
any Pitching or Rolling movement which could strain external
The compound used is based on a standard natural rubber connections. • Medium and high frequency motor compressor units.
specifically designed to have good ageing properties. •Gen sets. • Hydraulic Units. • Marine auxiliary units. • Ventilators,
etc.
Figure 1
A B C D E F G Weight Load
Type B1 Code Shore FIG.
A (mm) (mm) (mm) (mm) (mm) (mm) (mm) (gr.) (kg)
G
133101 50 45 Sh 2
A ATP 020 49,7 31,5 M-8 50 7 68 16 143 - 133102 75 60 Sh 2
G 133103 100 75 Sh 2
D
F
B1
133104 70 45 Sh 2
133105 120 60 Sh 2
D
F
B1
ØE 133106 175 75 Sh 2
ATP 120 73,6 43 M-10 72,2 9,2 90 32 379 53
133151 70 45 Sh 1
D
ØE 133152 120 60 Sh 1
133153 175 75 Sh 1
D
E
Figure 2 A 133107 140 45 Sh 2
C
133108 200 60 Sh 2
E
A
133109 300 75 Sh 2
C ATP 220 91 53 M-12 90 11 114,2 36 618 63
133154 140 45 Sh 1
D
F
B
133155 200 60 Sh 1
A A 133156 300 75 Sh 1
D
F
B
133110 300 45 Sh 2
A A
133111 500 60 Sh 2
D 133112 800 75 Sh 2
ATP 420 124,5 75 M-16 114 13 144 60 1510 94
F 133157 300 45 Sh 1
D
F
133158 500 60 Sh 1
133159 800 75 Sh 1
FRECUENCIA PROPIA
FRECUENCIA A MC
PROPIA A MC CURVAS
CURVASDE
DECARGA
CARGAFLECHA
FLECHA
MECANOCAUCHO®
NATURAL FREQUENCY TipoTipo
MECANOCAUCHO® ATPATP LOAD DEFLECTION GRAPH
MECANOCAUCHO®
MECANOCAUCHO® Tipo
TipoATP
ATP
AMC MECANOCAUCHO® ATP TYPE AMC MECANOCAUCHO® ATP TYPE
1000 1000 1000
1000
ATAT
42 5
0 60
4242
P
P
ATAT
0
60
0 270
5
A T 420
AT
4054
AT
250250
P
PTP P4
22 5
42 5
ATA ATA
PT
0
0
75
45
4
PTP
AT
T
P T0P6 0
A
AT
P TP
5 75 A
22 01 60
P 07
0 270
P
12 1
12
PATP
60 6
0
Load (Kg.)
T
Load (Kg.)
75
A
A T 220
545
AT
0240
P
222
P
0 60
22 45
PTP
0 260 TA
0
00270 PTP
AT
2 TA
AT
0P A
P
PAT
P
80 AT
02
80 80
02
80 0
0
00 6
AT
6
AT
70
75
70 2 5
00 54
AT
P
70
75
70 0P2 240
AT
P
12
PAT 201
P
12
60 AT T1P
P
0
02
60 60 P
A
0
45
AT
02
60
0
45
60
50
60
50 50
50 5
AT
05 4
AT
0 24
P
40
T0P2
P
40
02 45
40 40 AP
02
AT
45
0
30 30
30 30
25 25
25 25
20 20
20 20
15
15
15
15
10
10
10 6 8 10 12 14 16 20 10 1 1,5 2 3 4 5 6
6 8 10 12 14 16 20
1 1,5 2 3 4 5 6
Frecuencia Propia Hz Flecha (mm)
Natural Frequency
Frecuencia Propia (Hz)
Hz Flecha Deflection
(mm) (mm)
68 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
ANTI-VIBRATION
MOUNTS
SPS
DESCRIPTION
AMC MECANOCAUCHO® SPS type mounts are comprised of two F
pressed metal parts. A cup shaped Top Cap and a pressed steel D
inverted cup shaped base, two moulded rubber sections are assem-
bled to the metal parts and secured by means of a swaged centre
insert which is threaded.
A
TECHNICAL CHARACTERISTICS
C
Due to the design, SPS mounts can work with compression and ten-
sile loads, isolating effectively using the friction of the rubber section
with the surfaces of the assembled metal parts. It is most effective in
applications where high frequency vibrations are predominant. A
B
Various rubber compounds are available for insertion depending
upon the applications to be considered, high temperatures, oil and
G
diesel resistance, and ageing resistance against Ozone attack.
F
APPLICATIONS
D
With a captive rubber unit the SPS mounts afford total safety in 4 xØE
Mobile applications. They are compact in design for the range of
loads to be supported and can be manufactured in Stainless Steel
metal parts as an option for Food Industry applications, andA coupled
with appropriate compounds for the environments involved.
C
Applications range from high speed operation equipment such as
Refrigeration units, Compressors, Transformers, HVAC units on trains
F
D
or coaches.
A A
B
G
Type A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm) Weight (gr.) Code Load (kg) Shore
140001 80 45 Sh
SPS 020 50 28 M-8 50 6 60 1,5 171 140003 100 60 Sh
140005 150 75 Sh
140002 180 45 Sh
SPS 120 76 39 M-10 63,5 6,7 76 3 524 140004 240 60 Sh
140006 300 75 Sh
140007 170 45 Sh
SPS 220 90 51 M-12 90 11 114 3 971 140008 300 60 Sh
140009 450 75 Sh
140034 800 55 Sh
SPS 420 125 78 M-16 114 13 144 4 2424 140035 1400 65 Sh
140033 1625 75 Sh
Load (Kg.)
SP
0
75
SP
100 S 100
02 60
0 0
60 S 02
80 80 SP
SP 5
70 S 70 4
02 20
S0
60 0 60 SP
45
50 50
40 40
30 30
10 15 20 25 30 1 1,5 2 3 4
Natural Frequency (Hz) Deflection (mm)
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 69
VD
DESCRIPTION
The AMC MECANOCAUCHO® mount works the elastomer at shear-
compression. It is comprised of 2 metal parts which allow it to be
installed with its two built-in screws.
TECHNICAL CHARACTERISTICS
The type VD is a vee shaped mount providing high deflections for
relatively low loads. This means that the natural frequency is low and
ideal for engines which normally run at idle speed.
It has three different stiffnesses rates X,Y,Z which permits adjust- F
ments of system modes for optimal isolation and stability. B
C M
They can be installed at specific angles providing further adjustment
to the systems characteristics. For this purposes, please contact our
technical department.
G
APPLICATIONS
It is used in applications where the load of the suspended unit is low
and the level of vibration isolation must be high, such as:
A
D
• Small vehicles.
• Small and mediuMsized gen sets.
• Construction equipment machinery.
H
E
A B C D E F G H Weight Load
Type M Code
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (gr.) (kg)
Small 40 41 95 39 4 35 50 23 25 M-10 330 148121 75
Small 45 M12 41 95 39 4 35 50 30 30 M-12 350 148132 90
Small 50 41 95 39 4 35 50 23 25 M-10 330 148123 100
Small 60 41 95 39 4 35 50 23 25 M-10 330 148125 110
Small 60 M12 41 95 39 4 35 50 30 31 M-12 350 148133 110
Medium 45 64 130 60 6 52 60 34 36 M-12 805 148101 100
Medium 50 64 130 60 6 52 60 34 36 M-12 805 148102 100
Medium 60 64 130 60 6 52 60 34 36 M-12 805 148104 150
Medium 70 64 130 60 6 52 60 34 36 M-12 805 148105 175
150 150
ium 60 ed
VD
150 d 50
VDm
ium 50
m m
e
VD
m m
VD VD
ed e
m
diuVD ed m m
sem
diu l 50
D
D
m
iu diu
di
e
sm m
ed
m
aum
VD
120 VD e 0ll 5 l 45
l
m 5a
a l e di
VD
60 70
60 D m allm6a VD lls4m
iu
all
l 6 um V
m
all
0 5D
V ms a
ed V
100 VD sm
70
100 s D
VD 5
m m
VD VD 45 V
VD
0 sm
4
Vm
m
0 di
sm
diu
VD
ium
De VD
80 80
sdmi
80 d e
al
80 40
sm
e
um
al
4m0
l5
uam
m
all
l5
VaDll
al
0
ll 4
70 VD
45
70 70
l4
VD
70 sm sm
5
5
sm
D
sm
60 VD V
a
60 60
al
ll 4
60
Load (Kg.)
l4
0
Load (Kg)
0
Load (Kg)
(Kg.)
50 50 50
50
Load(Kg)
Load (Kg)
40 40 40
Load
40
30 30 30 30
25 25 25 25
20 20 20 20
15 15 15 15
10 10 10 10
6 67 87 98 10 9 1012 14
12 1614 1816 20 18 23
20 23 1 1 1,5 2
1,5 2 3 43 5 4 6 5 86 10 8 10
Natural Natural
Frequency (Hz)
Frequency Deflection (mm)
Natural Frequency (Hz) (Hz) Deflection (mm)
Deflection (mm)
70 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
ANTI-VIBRATION
MOUNTS
V-SHAPED
MARINE TYPE
DESCRIPTION
The AMC MECANOCAUCHO® V-shaped marine mount works the
rubber section in shear-compression. It is comprised of 2 metal
parts which permit its installation by means of a screw at the top
and two holes for securing it to the chassis.
TECHNICAL CHARACTERISTICS
The AMC MECANOCAUCHO ® V-shaped marine mount has a
V-shaped design providing high deflections for relatively low loads.
This means that the natural frequency is low and ideal for engines
which normally work at iddle speed. M16 X 1,5
70
APPLICATIONS
It is used in applications where the load of the suspended unit is
low, and where high deflection is required to reach high vibration 6,2
77,4
isolation levels.
Small vehicle or machines, small and medium sized gensets, marine
engines,...
6,2
205
173
15,8
60
17
Ø12
R6
,4
,2
Load (Kg.)
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 71
V-SHAPED GENERATOR
MOUNT
DESCRIPTION Anti-turn
tabs
The V-shaped AMC MECANOCAUCHO® Generator supports are
comprised of two symmetrically-tilted metal parts with a screw on
Figure 1
each side. ENGINE, COMPRESSOR,
GENERATOR SET
TECHNICAL CHARACTERISTICS
The V-shaped generator mounts render it possible to make installa-
tions which are more elastic than the ones usually made with cylin-
drical or bobbing mounts. This makes it possible to achieve lower SOL FRAME
frequencies and consequently better vibration isolation.
• Stability is enhanced when two are installed, symmetrically
opposed. See fig. 1.
• They have two different length screws which facilitate the assem-
bly of the the engine to the chassis. The screws can be supplied
in different lengths to order.
• They have two “anti-turn” tabs which stop the mount from tur-
ning when strong tightening torque is applied (very frequently)
with pneumatic tools.
• They are supplied in 2 hardnesses to adapt to different load
ranges. K
R
H
APPLICATIONS R
B
C
Very low-load engines requiring high levels of isolation.
P
Q
Portable gensets, compressors, motor pumps... D
G
F N
E
A J
A B C D E F G K L N P Q Weight R
Type H (º) J (mm) Code Load (kg) Shore
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (gr.) (mm)
148151 5 45 Sh
Small 23 14,5 18 18 3 38 15,9 50º 47 23 3 5 5 11 150 M8
148153 15 60 Sh
148171 40 45 Sh
Large 28 19,5 22 18 3 38 20 50º 54 31 3 7 10 16 205 M8
148173 90 60 Sh
NATURAL FREQUENCY
NATURAL AMC
NATURAL MECANOCAUCHO
FREQUENCIES
FREQUENCIES A MC A MC ®
LOAD
LOADDEFLECTION
LOAD GRAPH
DEFLECTION
DEFLECTION AMC MECANOCAUCHO®
GRAPHS
GRAPHS
V-SHAPED
V-SHAPED GENERATOR
V-SHAPED GENERATOR
MOUNT
GENERATOR MOUNTMOUNT V-SHAPED
V-SHAPED
V-SHAPED GENERATOR
GENERATOR
GENERATORMOUNTMOUNT
MOUNT
100 100 100 100
90 90 LA LA
RG RG
E E 80 80 0 0
70 70 60 60
70 E6 E6
70 RG RG
LA LA
60 60 60 60
50 50
LA LA
RG RG
40 40 E E 5
45 45 5
E4 E4
RG RG
LA LA
30 30 30 30
25 25 25 25
20 20 20 20
Load (Kg.)
15 15 15 15
Load (Kg)
SM
Load (Kg)
SM 0
Load (Kg)
Load (Kg.)
0 L6
Load (Kg)
AL AL L6 AL
L6 L6 AL SM
0 0 SM
10 10 10 10
SM SM
5 5 AL AL
L4 5 5
L4 5
5 5
L4
5 L4
4 4 AL AL
4 4 SM SM
3 3 3 3
2 2 2 2
5 56 6 8 8 10 1012 12 15 15
17 17
20 20 1 1 1,5 1,5 2 2 3 3 4 45 65 6 8 8
10 10
NaturalNatural
Natural frequency
Frequency
frequency (Hz)
Hz Hz Deflection
Deflection (mm) (mm)
Deflection (mm) Engine, compressor, generator set
72 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
ANTI-VIBRATION
MOUNTS
NP
DESCRIPTION
The AMC MECANOCAUCHO ® NP mounts are composed of a
metallic flange and a bush that are bondend to a high resilient
rubber compound.
Ø 90
The AMC MECANOCAUCHO® NP mounts can be fitted with over-
load/rebound washers. This allows fail-safe installations. For this 90
ØØ15
purpose we recommend using washer Ref. AMC: 608074 that has Ø15
the following dimensions: 76 x 16.5 x 5mm.
37
5
The flange comes with four fixing holes and the inner bush allows
up to 120 N/mm tightening torque.
37
5
TECHNICAL CHARACTERISTICS
SECTION A-A
AMC MECANOCAUCHO® NP mounts can be applied in mobile
SECTION A-A
applications when installed with overload/rebound washers.
AMC MECANOCAUCHO® NP mounts are available in several rubber 80 4 x Ø10,5
hardnesses to suit the load range of the application. 80 4 x Ø10,5
APPLICATIONS
AMC MECANOCAUCHO® NP mounts are used for the effective
noise and vibration isolation in the following applications:
• Agricultural equipment
100
80 80
100
• Construction equipment machinery.
• Cranes. A A
• Forklift trucks. A A
• Multipurpose vehicles.
300
300 300300
250
250 250250
h
7 h
t N 60 0 S
pp N NP 0 S
rt 7
Sh
h
po P
P S
200
200 200200
Su up rt N
60
S po
or P
p
Su
t
Su por
150 150150
p
150
s
NP 70
50 s
NP
(Kg)
H
Load (Kg)
P H
Load (Kg.)
(Kg.)
t N 50
Load (Kg)
(Kg)
70 Sh
or P
pp rt N
Load
Load
Sh
Su po
Load
100
100 100100
Su
80 80 80 80
70 70 70 70
NP 60 Sh
NP
60 60 60 60
60
50 50
Sh
NP 50 Sh
NP
50 50
50
40 40 40 40
Sh
30 30 30 30
10 10 15 15 20 20 1 1 1,5 1,5 2 2 3 3 4 4 6 6 12 12
8 8 10 10
Natural
Natural frequency
frequency HzHz Deflection
Deflection (mm)
Natural Frequency (Hz) Deflection(mm)
(mm)
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 73
TRANSFORMER
MOUNTS
DESCRIPTION
TECHNICAL CHARACTERISTICS
F
• The AMC MECANOCAUCHO® TRANSFORMER MOUNT incor-
porates resilient natural rubber specifically designed to last over
E C
time.
H
• The metal parts have a suitable anticorrosive treatment for G
outdoor applications.
The shape of the upper metal plate allows for the accommodation of A
the transformer wheel. This characteristic permits an easy installation B
without any additional fastening system.
Max.
A B C D E F G H Weight
Type Code Load
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (gr.)
(kg)
3000
2000
rge
La
1000
800
600
all
Sm
Load (Kg.)
Load (Kg)
400
100
1 1,5 2 3 4 5 6 7
Deflection (mm)
Deflection (mm)
74 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
ANTI-VIBRATION
MOUNTS
SH
DESCRIPTION
Each mount consists of two heavy duty square outer plates with
corner hole fixings fully bonded to circular profiled rubber layers
separated by interleaf plates.
The AMC MECANOCAUCHO® type SH mounts provide high static
and shock load capacities in compression with a minimum deflec-
tion, maintaining a low shear stiffness rate.
TECHNICAL CHARACTERISTICS
The AMC MECANOCAUCHO® type SH mounts are designed for
long lasting heavy duty applications.
They can be supplied in 3 different hardness and 3 different sizes to
suit applications where the compression load per mount is between
2 to 40 Tons.
APPLICATIONS
High compression capacity, low shear stiffness and relatively low
installed heights make the mounts ideal for: Vibratory rollers, Mills,
Presses, Heavy machinery, Feeder screens.
Due to their high load capacity these mounts are also used as point
bearings for the vibration isolation of building structures.
E
D
F
E
D
F
G
B
D
E
G G
B
D
E
G
Type B (mm) D (mm) E (mm) F (mm) G (mm) Weight (kg) Code Shore Max. Load (kg)
148213 45 Sh 2250
SH 125 52 118 148 13,5 5 2,5
148215 60 Sh 4500
148201 45 Sh 3750
SH 150 63 136 166 13,5 6 4,5
148202 60 Sh 7500
148204 45 Sh 6000
SH 200 78,5 184 220 17 8 9
148205 60 Sh 12000
148207 45 Sh 15000
SH 300 120 270 310 22 10 27 148208 60 Sh 30000
148209 70 Sh 40000
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 75
“VEE” INCLINED INSTALLATION CONFIGURATION
Elastical
Compression centre
axes of mounts
35000 35000
SH
30
70
30000 35000
07
30 S H
70
30000
0
30000
30
0 7 30
0
30000
30
SH
0 06
25000
SH
SH
25000 25000
30
25000
06
20000
60
0
20000
60
20000
0
30
20000
0
30
SH
SH
15000
15000 15000
SH
15000
SH
45
30
45
0
SH
12000
30
04
30
0
SH
12000
04
12000
5
20
30
SH
60
12000
5
20
06
SH
60
10000
06
0
0
20
10000 10000
0
S0H
20
9000 10000
SH
SH
9000
15
9000
SH
15
06
8000 9000
06
8000 8000
0
Load (Kg)
8000
0
(Kg)
Load(Kg.)
Load (Kg.)
7000
60
7000
60
6000
0
Load (Kg)
6000
Load
SH
6000
0
1
Load (Kg)
15
SH
6000
H
20
SH
S
20
5000
04
45
5000 5000
04
45
5
5000
00
5
SH
2
6 00
SH
SH
4000
12
60
2S5H
4000
12
4000
56
SH
4000
56
SH
1
12
0
15
SH
45
0
15
SH
45
04
0
04
15
0
5
3000
15
5
3000 3000
SH
3000
SH
SH
45
SH
45
2000
5
12
12
12
54
54
SH
SH
5
5
5 5 6 67 78 98 109 10 12 12
14 14
16 16 2018
18 20 1 1 1,5 1,5 3 34 4 6 68 108 10
Natural Frequency (Hz) Deflection (mm)
Natural
Natural frequency
frequency (Hz) (Hz) Deflection
Deflection (mm) (mm)
76 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
ANTI-VIBRATION
MOUNTS
AMC MECANOCAUCHO®
ANTI-SKID B AMC MECANOCAUCHO® TYPE B
Weight CODE
Type Code Load (Kg.) Load (kg) Deflection mm.(kg)
Weight
Type CODE
Code
(kg)
Load (Kg.) Deflection mm.
Anti-skid 141003
141003 7 8.000 3 141002
Type B 141004 3000 10000 9 13,022
140
350
10
350 200
10
70
50
22
300 140
12
300
10
200
AMC MECANOCAUCHO®
AMC MECANOCAUCHO TYPE P ®
TYPE ANTI-SKID P
DEFLECTION
Type CODE Code mm
Load (Kg.)
Weight (kg) Deflection mm.(kg)
Max. Load Type
Type CODECode Code
Weight (kg) DIMENSIONS
DEFLECTIONmm.
mm Max.
Max.
Load
Load
(Kg./cm
(Kg) 2)
160
66 66 160 ,5
Ø 35,1 66 66 14
160 Ø Ø 35,1
8
66 66
8
A A Ø 35,1
60
Ø1
66
52
77
93
60
66
8
160 ,5
160
A A 66 66 14 ØØ35,1
50
Ø
160
66
8
77
93
Ø 50
66
CORTE A-A A A
160
66
60
Ø1
52
,5 60
8
14
66
Ø Ø 50
66
CORTE A-A Ø 50
160
4,5
Ø1 A A
66
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 77
AMC MECANOCAUCHO® TYPE S AMC MECANOCAUCHO® TYPE G.C.
TYPE ACODE B A C B D C D
E EF DEFLECTION
F CHARGE FLÈCHELoad CODE
Type FLÈCHE
Code
Code LoadLoad CHARGE
(kg) (Kg.)DEFLECTION mmMAX.
DEFLECTION
Weight
mm. (kg)
Type Code
(mm.) (mm.) (mm.) (mm.) (mm.) (mm.) mm. Kg (Kg.)
mm
L-40
L-40 14102140 300 20 40 35020
300 350
140 140
200 2005 15,000 5
141021 15000 141041 8 mm. 30.000 Kg
Type G.C. 141041
141041 30000
30000 8 8 -
L-50
L-50 14102250 300 30 50 35030
300 350
140 140
200 2005 13,000 5
141022 13000
L-60
L-60 14102360 300 40 60 35040
300 350
140 140
200 2005 11,000 5
141023 11000
L-70
L-70 14102470 300 50 70 35050
300 350
140 140
200 2005 9,000
141024 5
9000
Ø 20
300
190
CORTE
A A
300
Ø 20
A E
40
10
300
190
C
B
D F CORTE A-A
A-A SECTION
10
A A
300
NATURAL FREQUENCY LOAD
LOADDEFLECTION
DEFLECTIONGRAPH
CURVES
NATURAL ®FREQUENCY LOAD MOUNTS
DEFLECTION CURVES
AMC MECANOCAUCHO MOUNTS
HIGH LOADNATURAL
FOR LARGE LOADS
MOUNTSFREQUENCY
AMC HIGH LOAD
MECANOCAUCHO ®
MOUNTS FOR LARGE LOADS
HIGH LOAD MOUNTS
HIGH LOAD MOUNTS 30000
30000 30000 C
G
30000 25000 C
G
25000 25000
25000
G
C
G
C
15000
15000 15000 40
L-
S
15000 40
L-
L- L- L-
S 50
40 50 60 L-70
L- L- L-
- S 50
S S
L
40 50 60 L-70
S 60 -
S S
L
10000 L- S 60
10000 10000 S L-
10000 SB
70
B
L- 70 B
S
L-
S
S
03 S
14
0 3
14
00
10
41
10
1 41
03
1
03
4000
14
10
10
3500
3500 3500 06 06
06
3500
06
10 10
3000 3000 3000 3000 14 14
Load (Kg)
C
Load (Kg)
C C
Load (Kg.)
Load (Kg)
(Kg)
Load (Kg.)
Load
T T
800 800 800
800
700 700 700
700
600 600
600 600
500
500 500
500
400
400 400
400
300
300 300
300
250
250 250
250
200
200 200
200
150
150 5 6 8 10 12 15 20 150
5 6 8 10 12 15 20 150 1 1,5 2 3 4 5 6 8 10 12 15
Natural Frequency (Hz) 1 1,5 2 3 4 5 6 8 10 12 15
Natural
Natural Frequency
Frequency (Hz)
(Hz) Deflection
Deflection(mm)
(mm)
Deflection (mm)
78 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
ANTI-VIBRATION
MOUNTS
NF LEVELLING MACHINE
MOUNTS
The N.F.-type AMC MECANOCAUCHO® mounts are used in cases
where light or heavy machines should not be fixed to the floor or
ground.
The height adjustment system can be used to adjust the machines
to the required level, thus insulating from vibrations and reducing
noise. The AMC MECANOCAUCHO® type NF comes with a tilting
system allowing optimum adaptation to all surfaces.
The elastomer used is a mixture of oil-resistant synthetic Nitrile
Butadyene Rubber (NBR).
Height is adjusted by means of a screw, although this operation
can even be performed once the machine has been assembled. The
wide contact between the base of the machine guarantees good
overall stability.
H
142001 M-12x1,75 105 110 1
NF-65 65 27 34 7 320 2 349
142017 M-12x1,75 78 85 2
142002 M-16x2 114 127 1
NF-85 85 33 46 13 650 2 732
142018 M-16x2 82 95 2
B
142003 M-16x2 120 130 1
NF-100 100 35 48 13 980 2 960
142019 M-16x2 82 95 2
142004 M-20x2,5 130 140 1
C
NF-130 130 45 58 13 2500 3 1675 142023 M-16x1,5 67 80 2
142028 M-16x1,5 99 112 2
142005 M-20x2,5 130 140 1
NF-160 160 53 66 13 4000 3 3397 142024 M-20x1,5 62 75 2 A
H
B max.
H min.
A
NFR-200 200 55 M-24 140 3700 3 1 142013 4924
INSTALLATION INSTRUCTIONS 1 2 3
Lift the machine and insert the Insert and turn the screw Adjust the height of the Block using the checknut.
mount under it. manually until it slots into place. machine by turning the screw.
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 79
SV
APPLICATIONS
The SV-type AMC MECANOCAUCHO® mounts are used in cases
where light or heavy machines are not fixed to the floor or ground.
The height adjustment system can be used to adjust the machines
to the required level, thus insulating areas nearby from vibrations
and reducing noise.
00
00 60
60 28
28 M10
M-10 81 60
60 120
120 235
143002 143002
235
0 70
70 32
34 M12
M-12 89 90
90 160
160 350
143003 143003
350
D
1 85
85 32
32 M12
M-12 89 130
130 350
350 456
143004 143004
456
2 100
100 40
40 M14
M-14 109
109 270
270 600
600 702
143005 143005
702
3 120
120 37
37 M16
M-16 116
116 450
450 900
900 954
143006 143006
954
4 140
140 55
55 M16
M-16 116
116 700
700 1.200
1200 1.513
143007 143007
1513
B
5 160
160 60
60 M16
M-16 116
116 1100
1100 1.750
1750 1.865
143008 143008
1865
6 180
180 70
70 M24
M-24 138
138 1500
1500 2.500
2500 3.034
143009 143009
3034 A
7 210
210 75
75 M24
M-24 138
138 2100
2100 3.750
3750 4.248
143010 143010
4248
JT Type
75 75 - 100 75-100
144002 53
53 144002
75 Sh
15,5
M 10
Ø 42
23
15,5
Ø 42
80 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
ANTI-VIBRATION
MOUNTS
LOW SV
APPLICATIONS
The LOW SV-type AMC MECANOCAUCHO® anti vibration mounts
are used in cases where light or heavy machines are not fixed to
the floor or ground. The height adjustment system can be used
to adjust the machines to the required level, thus insulating areas
nearby from vibrations and reducing noise.
D
4B 140 33 M-16 116 700 1200 147006 1300
S.M.-40
S.M.-40 40 40 18 M-8
18 48
M8 45
48 146001
45 79 79
146001
S.M.-60
S.M.-60 65 65 28 M-12
28 89
M12 150
89 146002
150 307 307
146002
D
S.M.-70
S.M.-70 75 75 29 M-12
29 89
M12 250
89 146003
250 363 363
146003
S.M.-90
S.M.-90 95 95 30 30
M-12 M12
89 89
500 500
146004 573 146004
573
B
S.M.-1.200
S.M.-120 125125 31 31
M-16 M16
116 116
1000 1.000
146005 904 146005
904
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 81
RUBBER BLOCKS & MATS
AMC MECANOCAUCHO®
There are different mats, in different sizes, rubber grades and hard-
nesses. The most classic use is for damping high frequency vibrations
without the need for any anchoring.
The user cuts them to the relevant size and can apply them using an
adhesive, or simply by placing them on the base of the machine. In
cases where contact with oils is foreseen, this should be indicated on
the order.
The mat will be more or less elastic or anti-skid, depending on the
different models.
30
30
0 0 40
30 0 40
0
0 04
30 00
Type A (mm) B (mm) LOAD kg MIN LOAD kg MAX FIG. Code Weight (kg)
82 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
ANTI-VIBRATION
MOUNTS
The use of high performance glue between the bolt and the
mounting is advisable in order to increase the security.
M1
M1
Hi-Sec
MACHINED
Type Code H (mm) M1 M2 ADJUSTABLE (mm) D.A.F. Weight (gr.)
HEAD
NORD LOCK
708077 110 M16 M12 ±5 Y 46 357
NORD LOCK
HI SEC
M2
STUD
M2
Shim
A C D F G H I
Type Code J (mm) Weight (kg)
A (mm) (mm) (mm) (mm) (mm) (mm) (mm)
C
F
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 83
AMC MECANOCAUCHO®
BUSHINGS
d
D
Torsion Mt Angle Torsion Axial load Fa Axial load Sa Radial load Fr Radial load Sr
Type Code d (mm) D (mm) I (mm) L (mm) Weight (kg)
max (Nm) max (°) max (N) max (mm) max (N) max (mm)
154005 10 22 25 30 0,034 7 10 500 0,9 1875 0,25
l DEFLECTION UNDER
L RADIAL LOAD
84 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
ANTI-VIBRATION
MOUNTS
AMC MECANOCAUCHO®
ELASTIC COUPLINGS
BUSHING BUSHING
* OPTIONS: - Hood
- Accessoires:
2 bushings
+ 2 nuts
+ 2 washers HOOD ELEMENT
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 85
ELASTOMERIC
SPRINGS
DESCRIPTION
The AMC-MECANOCAUCHO® type Elastomeric Spring anti vibration
mounts are ideal for those applications where high vibration isolation
is required. Its specific design allows this mount to have high deflec-
tion . This feature is particularly useful on those applications where
vibration in the vertical sense is predominant.
Ø 125 ±1
TECHNICAL CHARACTERISTICS APPLICATIONS
The damping properties of the rubber allow to provide a higher The AMC-MECANOCAUCHO ® Elastomeric Spring anti vibration
motion control of the suspended element. The optimal corrosion mounts are used in applications where a high degree of isolation
properties allow this mount to resist to aggressive corrosion is required and also motion control of the suspended element is
environments. required, such as : vibrating tables, vibration feeders or suspension of
industrial vehicles.
M16 Ø 75
A
4
A Ø 35
45,75
SECTION A-A
Ø 70 SECTION A-A
±1,5
Ø 70 96
96
M16
A
M16 SECTION A-A
4
A
4
142
A
45,75
132
Ø 18
45,75
142 ±1,5
Ø 14
142 ±1,5
25
10,5
16
20
A
25
16
35 22
25
132
16
SECTION A-A
A
10,5
A
M12
55
A M12 35 22
M12 35 22
28
RSF 110 132 RSF 55 55
SECTION A-A
SECTION A-A
A M10
A Ø M10
3x 18 fixation holes
Ø 14 Ø 39
Ø 55
10,5
10,5
55
132
28
A A
SECTION A-A
M10
Ø 35
Ø 39
A 3x M10 fixation holes Ø 55
Ø 110
86 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
ANTI-VIBRATION
MOUNTS
AMC
MECANOCAUCHO®
BOBBINS
DESCRIPTION TECHNICAL CHARACTERISTICS
The AMC MECANOCAUCHO Bobbins are devices for making elas-
®
Depending on the size of the rubber block, the
tic anchorings or fixings. They can be used in a wide variety of appli- AMC MECANOCAUCHO® bobbing has more or less elasticity, which
cations, particularly for elastic suspensions and antivibration isolation is greater particularly in all directions perpendicular to its axis
of machines and different mechanical organs. (shear).
They are made of a block of rubber with two parallel metal parts The AMC MECANOCAUCHO® bobbing thus makes it possible to
at the end which enable it to be fixed either by screws in the ‘’C’’ make joins which permit major relative movements, up to sev-
model or with nuts in the ‘’A” model or a combination of both in eral millimetres (in the case of heat expansion, chassis deformations,
the ‘’B” model. etc.).
The rubber block may be cylindrical in cases requiring greater load The AMC MECANOCAUCHO® bobbing serves very well for the vibra-
capacity or as a diabolo when greater elasticity is required in all tion isolation of machines where the vibrations are perpendicular to
directions. their axis, unless these stresses are too much when applied in this
direction.
OPERATION AND ASSEMBLY
ADVANTAGES
Its elasticity is much greater in all the directions parallel to the arma-
tures than in the perpendicular direction. The rubber works based • Easy to install.
on compression or shear depending on the direction it is placed at
installation time. This direction is made according to the use and the • High elasticity (particularly transversal).
objective. • Economical.
It is therefore installed with nuts or screws depending on the model APPLICATIONS
chosen, with one part attached to the fixed chassis and the other to
the machine to be suspended. The AMC MECANOCAUCHO® bobbins are particularly suitable for
installation on small motor-pumps, motor-ventilators, driers, sieves,
compactors, washing machines, electrical motors, on-board control
panels, measuring apparatuses, control cabinets, microphones, fluo-
rescent tubes, etc.
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 87
AMC
COMPRESSION LOAD
SHEAR DEFLECT. mm
SHEAR LOAD Max.
COMPRESSION
DEFLECT. mm
Weight (kg)
Max. daN
MECANOCAUCHO®
daN
Type Code A (mm) B (mm) C (mm) H (mm)
88 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
ANTI-VIBRATION
MOUNTS
AMC
COMPRESSION DEFLECT.
SHEAR DEFLECT. mm
Weight (kg)
Max. daN
MECANOCAUCHO® A B C H
mm
Type Code
(mm) (mm) (mm) (mm)
TYPE B 121002
121003
121011
121012
12,5
12,5
16
16
15
20
10
15
M-5
M-5
M-5
M-5
10
10
12
12
0,006
0,007
0,008
0,01
10
8
20
20
3
3,5
1,5
3
1,5
1,5
2,5
2,5
2
4
1,5
2
121013 16 20 M-5 12 0,011 15 4 2,5 4
121014 16 25 M-5 12 0,012 15 5 2 5
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 89
AMC
SHEAR DEFLECT. mm
COMPRESSION DE-
Weight (kg)
FLECT. mm
Max. daN
MECANOCAUCHO® Type Code A (mm) B (mm) C (mm)
TYPE C
122013 16 20 M-5 0,01 15 4 2,5 4
122014 16 25 M-5 0,012 15 5 2 5
122023 20 20 M-6 0,017 30 5 5 3,5
122024 20 25 M-6 0,018 30 5,5 4,5 4,5
122025 20 30 M-6 0,019 25 7 4,5 4,5
90 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
ANTI-VIBRATION
MOUNTS
AMC 110001
110002
110003
12,5
12,5
12,5
10
15
20
M-5
M-5
M-5
10
10
10
0,004
0,004
0,005
12
10
8
2
3
3,5
MECANOCAUCHO® 110004
110005
110006
16
16
16
10
15
20
M-5
M-5
M-5
12
12
12
0,006
0,008
0,008
20
20
15
1,5
3
4
TYPE D
110007 16 25 M-5 12 0,009 15 5
110008 20 8,5 M-6 16,5 0,009 40 1,5
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 91
SIMPLE BUFFERS Type Code
A
(mm)
B
(mm)
C
(mm)
Weight (kg)
COMPRESSION COMPRESSION
LOAD Max. daN DEFLECT. mm
AMC
111001 12,5 10 M-5 0,004 12 2
111002 12,5 15 M-5 0,004 10 3
111003 12,5 20 M-5 0,004 8 3,5
MECANOCAUCHO®
111004 16 10 M-5 0,005 20 1,5
111005 16 15 M-5 0,006 20 3
111006 16 20 M-5 0,007 15 4
TYPE E
111007 16 25 M-5 0,008 15 5
111008 20 8,5 M-6 0,008 40 1,5
92 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
ANTI-VIBRATION
MOUNTS
COMPRESSION LOAD
SHEAR DEFLECT. mm
SHEAR LOAD Max.
COMPRESSION
DEFLECT. mm
Weight (kg)
Max. daN
A B C H
daN
Type Code
(mm) (mm) (mm) (mm)
120304 25 30 M-6 18 - 50 8 8 6
120306 30 30 M-8 23 - 70 8 11 6
TYPE A
SHEAR DEFLECT. mm
SHEAR LOAD Max.
COMPRESSION
DEFLECT. mm
Weight (kg)
Max. daN
daN
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 93
AMC MECANOCAUCHO®
DIABOLO MOUNTS
APPLICATIONS
The AMC MECANOCAUCHO® Diabolo mounts are particularly sui-
table for installation on small motor-pumps, motor-ventilators, driers,
sieves, compactors, washing machines, electrical motors, on-board
control panels, measuring apparatuses, control cabinets, micro-
phones, fluorescent tubes, etc.
SHEAR DEFLECT.
LOAD Max. daN
COMPRESSION
COMPRESSION
DEFLECT. mm
A B D H
daN
mm
Type Code C (mm) Weight (kg)
(mm) (mm) (mm) (mm)
SHEAR DEFLECT.
LOAD Max. daN
COMPRESSION
COMPRESSION
DEFLECT. mm
A B D H
daN
mm
SHEAR DEFLECT.
LOAD Max. daN
COMPRESSION
COMPRESSION
DEFLECT. mm
A B D
daN
mm
94 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
ANTI-VIBRATION
MOUNTS
TRAPEZOIDAL MOUNTS
AMC MECANOCAUCHO®
APPLICATIONS
Trapezoid mounts for ventilation boxes, small air-conditioning units, etc.
Type B (mm.) C D (mm.) A1 A2 Code LOAD Kg. MIN LOAD Kg. MAX
A-35-b 24 M8 24 30 40 131001 3 30
A-35 24 M8 24 30 40 131002 25 50
A-45-b 34 M8 24 40 50 131003 50 70
A-45 34 M8 24 40 50 131004 60 85
ANNULAR MOUNTS
C A
AMC MECANOCAUCHO®
G
APPLICATIONS
The AMC MECANOCAUCHO® Annular Mounts are comprised of a rubber ring joined by two metal parts with screws for fixation. Thanks to
their design, these antivibration mounts may insulate low frequencies with low loads.
B
Type A (mm.) B (mm.) C D (mm.) E (mm.) G (mm.) Code Load (Kg.) DEFLECTION mm.
E D
830 24 30 M8 29 24 20 130004 3,5 6
831 24 30 M8 29 24 20 130002 8 6
C A
G
B
E D
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 95
PROGRESSIVE BUFFERS
AMC MECANOCAUCHO®
APPLICATIONS
As buffers: In any case for limiting a flexible element.
96 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
ANTI-VIBRATION
MOUNTS
DIABOLO BUFFERS
AMC MECANOCAUCHO®
APPLICATIONS
Dynamic
A B C H Static Load max. Dynamic Static
Type Code Weight (kg) Load max.
(mm) (mm) (mm) (mm) daN Deflection mm Deflection mm
daN
CYLINDRICAL BUFFERS
AMC MECANOCAUCHO®
APPLICATIONS
T -150 117001 160 125 185 150 13,5 5000 50 4,172 1250
B
C
D
T - 250 117002 250 208 315 250 14,5 40000 100 18 12500
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 97
INSTALLATION PRINCIPLES
98 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
ANTI-VIBRATION
MOUNTS
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 99
RECOMMENDATIONS FOR AMC MECANOCAUCHO® MACHINE MOUNTS WITHOUT ADJUSTABLE HOOD
On installing one of our AMC MECANOCAUCHO® machine mounts without adjustable hood, great care should be taken to ensure that the
load of the machine does not rest on the screw, but on the hood.
This applies to our AMC MECANOCAUCHO® SV, SM and low SV series mounts.
RECOMMENDATIONS FOR TORQUE TIGHTENING FOR THE BRB, BSB, MD AND MARINE MOUNTS
Before installing, make sure that the support surfaces are sufficiently rigid flat and totally parallel. The main fixing screw should be tightened
according to the torques recommended in the following chart:
100 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
ANTI-VIBRATION
MOUNTS
OTHER PRODUCTS
VIBRABSORBER+SYLOMER® Spring mounts catalogue.
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 101
NOISE
REDUCTION
MOUNTS
102 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
ANTI-VIBRATION
MOUNTS
OTHER PRODUCTS
AKUSTIK & AKUSTIK+SYLOMER®
NOISE REDUCTION MOUNTS
FZ + Sylomer®
TSR + Sylomer®
Springtec &
Springtec Super
Akustik + Sylomer®
SCB
Vibrabsorber
Noise isolation wall + Sylomer®
EP+Sylomer®
Transformatoren
AMC Anti-seismic
+Sylomer® BRB FZH + Sylomer®
* In order to adapt its products to the state of the art, AMC S.A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice. 103
Discover THE APP THAT HELPS YOU TO FIND
THE CORRECT VIBRATION ISOLATOR for
your application.
VIBRATION
ISOLATOR
PRO
Let your phone discover THE MAIN DISTURBING
FREQUENCIES of your application
104 * In order to adapt its products to the state of the art, AMC .A. reserves the right to modify the conception and manufacture of the materials presented in this catalogue without prior notice.
VIBRATION ISOLATION GRAPH
Frequency of excitation Hz
Natural frequency Hz
48 h. 24 h.
72 h. 24 h.
San Sebastián
Asteasu
48 h. 24 h.
72 h. 24 h.
San Sebastián
Asteasu
Aplicaciones Mecánicas del Caucho S.A.
Industrialdea Parc 35 A. • E-20.159
ASTEASU (Gipuzkoa) Spain
Tel.: + 34 943 69 61 02 • Fax: + 34 943 69 62 19
e-mail: sales@amcsa.es
www.akustik.com
www.mecanocaucho.com
BI- 748-2016
V0 (m/s)
V1 (m/s)
V2 (m/s)
V3 (m/s)