Documente Academic
Documente Profesional
Documente Cultură
TRANSILTM
FEATURES
PEAK PULSE POWER : 5000 W (10/1000µs)
STAND-OFF VOLTAGERANGE :
From 10V to 180V
UNI AND BIDIRECTIONAL TYPES
LOW CLAMPING FACTOR
FAST RESPONSE TIME
UL RECOGNIZED
DESCRIPTION
AG
Transil diodes provide high overvoltage protection
by clamping action. Their instantaneous response
to transient overvoltages makes them particularly
suited to protect voltage sensitive devices such
as MOS Technology and low voltage supplied
IC’s.
PPP Peak pulse power dissipation (see note 1) Tj initial = Tamb 5000 W
P Power dissipation on infinite heatsink Tamb = 75°C 6.5 W
THERMAL RESISTANCES
0 t
1000 s
2/5
BZW50-10,B/180,B
Fig. 2 : Peak pulse power versus exponential pulse duration.
Pp p (W)
1E7
°C
Tj initial = 25ø
1E6
1E5
1E4
1E3
tp (ms ) EXPO.
1E2
0.001 0.01 0.1 1 10 100
Note : The curves of the figure 3 are specified for a junction temperature of 25 °C before surge.
The given results may be extrapolated for other junction temperatures by using the following formula :
∆VBR = αT * (Tamb -25) * VBR (25°C).
For intermediate voltages, extrapolate the given results.
3/5
BZW50-10,B/180,B
Fig. 4a : Capacitance versus reverse applied Fig. 4b : Capacitance versus reverse applied
voltage for unidirectional types (typical values). voltage for bidirectional types (typical values).
Fig. 5 : Peak forward voltage drop versus peak Fig. 6 : Transient thermal impedance junction-am-
forward current (typical values for unidirectional bient versus pulse duration (For FR4 PC Board
types). with L lead = 10mm).
Note : Multiply by 2 for units with V BR > 220V.
4/5
BZW50-10,B/180,B
ORDER CODE
BZW 50 - 10 B
5000 W
MARKING : Logo, Date Code, Type Code, Cathode Band (for unidirectional types only).
note 1 L1 L1 note 1
Min. Max. Min. Max.
A 9 0.354
B 20 0.787
∅C 8 0.315
∅D 1.35 1.45 0.053 0.057
D D
L1 1.27 0.050
note 2
Note 1 : The lead is not controlled within zone L1
Note2 : Theminimum axial length within which the device
canbe bentat right anglesis 0.79”(20 mm).
Weight = 1.6 g.
Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsibility for the
consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No
license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned
in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied.
SGS-THOMSON Microelectronics products are not authorized for use as critical components in life support devices or systems without express
written approval of SGS-THOMSON Microelectronics.