Documente Academic
Documente Profesional
Documente Cultură
The application focus of drainage pipes can be seen from their name; they are used for drainage
of construction and other sites with considerable quantities of water. They are produced under the
brand name ›A‹ DREN pipes, are yellow in color, and meet the requirements of the norm DIN 1187,
according to which the quality of all contemporary drainage pipes manufactures are tested.
While being laid into the ground, drainage pipes may be covered with filter material, for the purpose
of increasing the hydraulic power of drainage and preventing obstructions in the pipes.
Material Today, at a time of the application of new materials and new technological processes
instead of classical materials, plastic materials have been increasingly used. For
drainage pipes, the material used is PVC.
Drainage pipes are installed either by machine or manually, depending on the
area to be drained. In agriculture, where the areas are much bigger, the pipes are
installed by machine because the process is much more efficient and quicker.
The corrugated pipe system has an additional groove on each perforated rib, which
contributes considerably to a quicker access of water to the slit from the area around
drainage pipes.
Drainage pipes are available in the range between DN 50 and DN 200 in diameter,
and are delivered in 50-m coils.
NUMBER OF ROWS 6 6 6 6 8 8 10
COIL INNER DIAMETER 0.55 0.55 0.55 0.55 0.55 0.55 0.55
m
COIL OUTER DIAMETER 1.25/0.95 1.50/1.00 1.60/1.30 2.00/1.50 1.60 2.00 2.10
FITTINGS