Documente Academic
Documente Profesional
Documente Cultură
Part Number:
IT5-NW24 IT5-NW36
Important: Read all instructions prior to installation. WIFI-CON
IT5-NW48
Linkable Linear LED Light Fixture
Summary
Linear LED lights are heavy-duty, super-bright, low-voltage fixtures. Perfect
for RV lighting, boat, trailers, and off-grid lighting—the IT5 Tube Lights have
powerful LEDs, high lumen outputs, and very long lifetimes. Wide DC voltage
range makes them suitable for 12- and 24-volt applications. Can also be used
in high-voltage applications with our 12- or 24-volt power supplies. These LED
tube lights link end to end with the optional interconnect cables.
Installation Instructions
8”
1. Drill pilot holes for mounting screws and install
mounting clips approximately 8” from ends 8”
Endcap
of fixture. This will allow the fixtures to slide
into position while still maintaining adequate
support. Repeat for all fixtures in the run. Mounting Bracket Installation Single Fixture Installation
8”
2. Snap fixtures in place. Make connections
between fixtures using supplied
8”
butt connector 8”
or optional interconnects. Endcap
8” or
3. Use tube end cap to cover unused power Endcap
connector on the last fixture in the run. Mounting Bracket Installation SingleInstallation
Multiple Fixture Fixture Installation
4. Connect powercord
Mounting to 12~24VDC
Bracket Installation power Single Fixture Installation
source and plug into the first light in the run.
or
Multiple Fixture Installation
or
Multiple Fixture Installation
Finished Run
Dimensions
Wiring Diagram