Documente Academic
Documente Profesional
Documente Cultură
Orion 4500TM
The dual-port Orion 4500 provides a single
T3/E3 CSU/DSU Access Multiplexer
platform with software-selectable line speeds
for linking high-speed applications across a
T3 or E3 line. It is ideal for Internet backbones,
scalable fractional T3/E3 Internet access ser-
vices, and other high-speed WAN connec-
tions.
The Orion 4500 splits the T3/E3 bandwidth
between two high-speed serial ports config-
urable in multiples of 3.158 Mbps (T3), 3.759 SPECIFICATIONS
Mbps (E3 G.751), or 3.072 Mbps (E3 G.832). Power
For full payload line bandwidth, one port can AC 100 to 240 V AC RMS; 50 to 60 Hz; 20 watts
also be used in clear-channel or unframed DC -40 to –56 (nominal –48) V DC; 280 to 420 mA; 16.8 watts (special order)
mode. Bandwidth allocation can be auto- BTUs 68.25 BTUs/hr (AC); 57.34 BTUs/hr (DC)
matically reconfigured for peak and non-peak Network Interface
usage. Line Rate T3: 44.736 Mbps E3: 34.368 Mbps
Framing T3: T1.102, T1.107a, T1.404; also unframed mode
Management and diagnostic features include E3: G.703, G.751, G.823; also unframed mode
an integral SNMP agent, Telnet, menu-driven Line Coding T3: B3ZS E3: HDB3
terminal interface with ASCII graphical test Physical Interface 75-ohm BNC coaxial, socket
set, detailed 24-hour performance histories, DTE Interface
alarm logging and dial-out, and extensive Data Rate T3: increments of 3.158 Mbps to 44.2 Mbps; unframed modes for access to full line
rate
loopback and test pattern options. E3: increments of 3.759 (ES G.751) or 3.072 (E3 G.832) Mbps to 34.368Mbps;
unframed modes for access to full line rate
It also offers remote management over the in- Electrical TIA/EIA TR30.2 Proposal Number 2796 MECL 10KH
band maintenance channel. Physical Interface 50-pin high-density (SCSI-II connector)
The flexible Orion 4500 increases the cost- Management
effectiveness of broadband networking. Ports Serial (RS-232, DB9 male); Modem (V.34, RJ11) for dial-in and dial-out;
Ethernet (10/100Base-T, RJ45)
Terminal Interface Menu-driven, VT100 ASCII terminal; serial to 38400 baud or Telnet; in-band manage-
ment of far end via MDL (T3/E3)
SNMP Interface DS3 MIB (RFC 2496), standard and private MIBs; user-configured traps
58 ■ Intelligent CSU/DSUs and Access Routers Information subject to change without notice
2793_ProductCatalog.bk Page 59 Friday, November 14, 2003 5:32 PM
Line Ports
Typical Application II
The Orion 4500 reduces network complexity and operating costs while increasing the reliability of high-speed full and subrate T3/E3 service delivery.
As a dual-port demarcation point between the network and customer premises, it increases the visibility of critical high-speed networks and saves
the cost of implementing dual devices to support multiple data sources.
Orion 4500
T3/E3
T3/E3 T3/E3
SWITCH NETWORK SWITCH
T3/E3 T3/E3
Orion 4500 Orion 4500
Don’t see the product configuration you need? Call your local reseller or 1-888-LARSCOM ■ 59