Documente Academic
Documente Profesional
Documente Cultură
xls
Description: This spreadsheet calculates parameters for HPP selection.
Instruction: 1) Update parameter values in the Input Data and Solution sections; and 2) view result in the
Solution section.
Input Data:
Reservoir depth (D): 2500
Reservoir pressure (pbar): 15
AOF in Vogel equation for IPR (qmax): 100
Production fluid gravity (gL): 0.825
Formation volume factor of production liquid (BL): 1.25
Tubing inner diameter (dti): 5
B-value: 0.00051
Power fluid viscosity (npf): 0.001
Well head pressure (pwh): 0.7
Pump setting depth (Dp): 2800
Desired production rate (qLd): 70
HPP efficiency (Ep): 0.8
Surface pump efficiency (Es): 0.85
Engine efficiency (Ee): 0.9
Pump speed ratio (N/Nmax): 0.8
Power fluid flow system (1 = OPFS, 0 = CPFS): 1
Solution:
Desired bottom hole pressure from IPR (pwfd) = 7.5
Pump intake pressure (ppump,i) = 9.89
Net lift (LN) = 1559
Design pump to engine area ratio (P/E) = 1.96
Flow rate at pump suction point (qLs) = 88
Design flow rate of pump (qpd) = 137
Input from manufacturer’s literature: Pump P/E: 1.13
qp,max: 80
qe,max: 85
Nmax: 27
Flow rate per stroke/min in pump (q'p) = 3
Flow rate per stroke/min in engine (q'e) = 3
Pump speed (N) = 22
Power fluid rate (qpf) = 76
Return production flow rate (qtotal) = 163
Input pump discharge pressure by mHB correltion (ppump,d): 20.00
Input engine discharge pressure by mHB correltion (peng,d): 20.00
Pump friction-induced pressure loss (Fpump) = 2.05
Required engine pressure (peng, i) = 33.47
Input pressure change in the injection tubing (Dpinj): = 24.00
Required surface operating pressure (pso) = 9.47
Required surface power (HPso) = 9.85
d 2) view result in the
m 8,200 ft
MPa 2,205 psia
m3/day 629 stb/day
1 for H2O 0.825 1 for H2O