Documente Academic
Documente Profesional
Documente Cultură
[1] Z. Gao, C. Cecati, and S. X. Ding, “A survey of fault diagnosis and fault-tolerant
techniques—Part I: Fault diagnosis with model-based and signal-based approaches,”
IEEE Trans. Ind. Electron., vol. 62, no. 6, pp. 3757–3767, Jun. 2015.
[2] “Report of large motor reliability survey of industrial and commercial installations,
Part I,” IEEE Trans. Ind. Appl., vol. IA-21, no. 4, pp. 853– 864, Jul. 1985.
[4] X. Dai and Z. Gao, “From model, signal to knowledge: A data-driven perspective of
fault detection and diagnosis,” IEEE Trans. Ind. Informat., vol. 9, no. 4, pp. 2226–2238,
Nov. 2013.
[5] T. Ince, S. Kiranyaz, L. Eren, M. Askar, and M. Gabbouj, “Real-time motor fault
detection by 1-D convolutional neural networks,” IEEE Trans. Ind. Electron., vol. 63, no.
11, pp. 7067–7075, Nov. 2016.
[6] Y. Lei, F. Jia, J. Lin, S. Xing, and S. X. Ding, “An intelligent fault diagnosis method
using unsupervised feature learning towards mechanical big data,” IEEE Trans. Ind.
Electron., vol. 63, no. 5, pp. 3137–3147, May 2016.
[9] V. Do and U.-P. Chong, “Signal model-based fault detection and diagnosis for
induction motors using features of vibration signal in two- dimension domain,”
Strojniˇski vestnik - J. Mech. Eng., vol. 57, no. 9, pp. 655–666, 2011.
[10] G. G. Yen and K. C. Lin, “Wavelet packet feature extraction for vibration
monitoring,” IEEE Trans. Ind. Electron., vol. 47, no. 3, pp. 650–667, Jun. 2000.
[11] Y. Li, M. Xu, X. Liang, and W. Huang, “Application of bandwidth EMD and
adaptive multi-scale morphology analysis for incipient fault diagnosis of rolling
bearings,” IEEE Trans. Ind. Electron., vol. 64, no. 8, pp. 6506– 6517, Aug. 2017.
[12] A. Giantomassi, F. Ferracuti, S. Iarlori, G. Ippoliti, and S. Longhi, “Signal based
fault detection and diagnosis for rotating electrical machines: Issues and solutions,” Stud.
Fuzziness Soft Comput., vol. 319, pp. 275–309, 2015.
[14] W. Du, J. Tao, Y. Li, and C. Liu, “Wavelet leaders multifractal features based fault
diagnosis of rotating mechanism,” Mech. Syst. Signal Process., vol. 43, no. 1–2, pp. 57–
75, 2014.
[16] I. Daubechies, Ten Lectures on Wavelets. Philadelphia, PA, USA: Soc. Ind. App.
Math., 1992.
[18] M. Blodt, P. Granjon, B. Raison, and G. Rostaing, “Models for bearing damage
detection in induction motors using stator current monitoring,” IEEE Trans. Ind.
Electron., vol. 55, no. 4, pp. 1813–1822, Apr. 2008.
[19] M. Amar, I.Gondal, and C.Wilson, “Vibration spectrum imaging:A novel bearing
fault classification approach,” IEEE Trans. Ind. Electron., vol. 62, no. 1, pp. 494–502,
Jan. 2015.
[20] A. M. Mood and F. A. Graybill, Introduction to the Theory of Statistics, ser. Int.
student ed. New York, NY, USA: McGraw-Hill, 1963.
[24] X. Jin, M. Zhao, T. W. S. Chow, and M. Pecht, “Motor bearing fault diagnosis using
trace ratio linear discriminant analysis,” IEEE Trans. Ind. Electron., vol. 61, no. 5, pp.
2441–2451, May 2014.
[25] X. Zhang, Y. Liang, J. Zhou, and Y. Zang, “A novel bearing fault diagnosis model
integrated permutation entropy, ensemble empirical modedecomposition and optimized
SVM,” Measurement, vol. 69, pp. 164–179, 2015.
[28] H. Jeffreys, “An invariant form for the prior probability in estimation problems,”
Proc. Roy. Soc. Lond. Ser. A, Math. Phys. Sci., vol. 186, no. 1007, pp. 453–461, 1946.
[29] V. M. Zolotarev, “Probability metrics,” Theory Probab. Appl., vol. 28, no. 2, pp.
278–302, 1984.
[30] Z. Zhang, “Estimating mutual information via Kolmogorov distance,” IEEE Trans.
Inf. Theory, vol. 53, no. 9, pp. 3280–3282, Sep. 2007.
[31] M. Li,X. Chen, X. Li, B.Ma, and P.M. B.Vitanyi, “The similarity metric,” IEEE
Trans. Inf. Theory, vol. 50, no. 12, pp. 3250–3264, Dec. 2004.
[35] A. L. Gibbs and F. E. Su, “On choosing and bounding probability metrics,” Int.
Statist. Rev., vol. 70, no. 3, pp. 419–435, 2002.
[36] S. Kullback, Information Theory and Statistics. New York, NY, USA: Dover, 1997.
[37] M. F. Yaqub, I. Gondal, and J. Kamruzzaman, “Inchoate fault detection framework:
Adaptive selection of wavelet nodes and cumulant orders,” IEEE Trans. Instrum. Meas.,
vol. 61, no. 3, pp. 685–695, Mar. 2012.
[38] Case Western Reserve University Bearing Data Center, “Bearing Data Center,”
2017. [Online]. Available: http://csegroups.case.edu/bearingdata center/home
[39] W. A. Smith and R. B. Randall, “Rolling element bearing diagnostics using the Case
Western Reserve University data: A benchmark study,” Mech. Syst. Signal Process., vol.
64, pp. 100–131, 2015.
Ref 2
1] Z. Xu, J. Xuan, T. Shi, B. Wu, and Y. Hu, “A novel fault diagnosis method of bearing
based on improved fuzzy ARTMAP and modified distance discriminant technique,”
Expert Syst. Appl., vol. 36, no. 9, pp. 11801–11807, Nov. 2009.
[5] B. Li, M.-Y. Chow, Y. Tipsuwan, and J. C. Hung, “Neural-networkbased motor rolling
bearing fault diagnosis,” IEEE Trans. Ind. Electron., vol. 47, no. 5, pp. 1060–1069, Oct.
2000.
[11] Y. Pan, J. Chen, and L. Guo, “Robust bearing performance degradation assessment
method based on improved wavelet packet-support vector data description,” Mech. Syst.
Signal Process., vol. 23, pp. 669–681, 2009.
[12] W. J.Wang, J. Chen, X. K.Wu, and Z. T.Wu, “The application of some nonlinear
methods in rotating machinery fault diagnosis,” Mech. Syst. Signal Process., vol. 15, pp.
697–705, 2001.
[16] N. Nguyen and H. Lee, “Bearing fault diagnosis using adaptive network based fuzzy
inference system,” in Proc. Int. Symp. Elect. Electron. Eng., HCM City, Vietnam, 2007,
pp. 280–285.
[19] X. Liu, L. Ma, and J. Mathew, “Machinery fault diagnosis based on fuzzy measure
and fuzzy integral data fusion techniques,” Mech. Syst. Signal Process., vol. 23, no. 3, pp.
690–700, 2009.
[20] P. K. Kankar, S. C. Sharma, and S. P. Harsha, “Fault diagnosis of ball bearings using
continuous wavelet transform,” Appl. Soft Comp., vol.11, no. 2, pp. 2300–2312, 2011.
[22] H. Yang, J. Mathew, and L. Ma, “Fault diagnosis of rolling element bearings using
basis pursuit,” Mech. Syst. Signal Process., vol. 19, pp. 341–356, 2005.
[23] J. Yu, “Local and nonlocal preserving projection for bearing defect classification
and performance assessment,” IEEE Trans. Ind. Electron., vol. 59, no. 5, pp. 2363–2376,
May 2012.
[25] D. P. Filev, R. B. Chinnam, F. Tseng, and P. Baruah, “An industrial strength novelty
detection framework for autonomous equipment monitoring and diagnostics,” IEEE
Trans. Ind. Inf., vol. 6, no. 4, pp. 767–779, Nov. 2010.
[26] C. K. Mechefske, “Objective machinery fault diagnosis using fuzzy logic,” Mech.
Syst. Signal Process., vol. 12, no. 6, pp. 855–862, 1998.
[27] H. Li, L. Fu, andH. Zheng, “Bearing fault diagnosis based on amplitude and phase
map of Hermitian wavelet transform,” J. Mechanical Sci. Technol., vol. 25, no. 11, pp.
2731–2740, 2011.
[30] Y. Zhang, X.-D. Liu, F.-D. Xie, and K.-Q. Li, “Fault classifier of rotating
filtering,” IEEE Trans. Ind. Electron., vol. 58, no. 9, pp. 4353–4364,
Sep. 2011.
[35] C. Liu and H. Wechsler, “Robust coding schemes for indexing and retrieval
[36] S. Haykin, Neural Networks and Learning Machines, 3rd ed. Englewood
F. Roli, Eds. Cagliari, Italy: Springer, 2000, vol. 1857, pp. 1–15.
datasets: A review,” GESTS Int. Trans. Comp. Sci. Eng., vol. 30, no. 1,
Ref 3
[1] J. Chen, Z. Li, J. Pan, G. Chen, Y. Zi, J. Yuan, B. Chen, and Z. He,
2008.
[6] B. Kim, S. Lee, M. Lee, J. Ni, J. Song, and C. Lee, “A comparative study
Bulletin of the American Meteorological society, vol. 79, no. 1, pp. 61–
78, 1998.
transform,” Journal of sound and vibration, vol. 320, no. 1, pp. 452–468,
2009.
[11] B. Paya, I. Esat, and M. Badi, “Artificial neural network based fault
751–765, 1997.
Systems and Signal Processing, vol. 18, no. 6, pp. 1315–1333, 2004.
[18] R. Battiti and F. Masulli, “BFGS optimization for faster and automated
[21] Y. Wang, J. Xiang, R. Markert, and M. Liang, “Spectral kurtosis for fault
679–698, 2016.
Ref 4
1 Bellini, A., Filippetti, F., Tassoni, C., Capolino, G.A.: ‘Advances in diagnostic
techniques for induction machines’, IEEE Trans. Ind. Electron., 2008, 55, (12),
pp. 4109–4126
2 Tse, P.W., Peng, Y.H., Yam, R.: ‘Wavelet analysis and envelope detection for
3 William, P.E., Hoffman, M.W.: ‘Identification of bearing faults using time domain
zero-crossings’, Mech. Syst. Signal Process., 2011, 25, (8), pp. 3078–3088
4 Prieto, M.D., Cirrincione, G., Espinosa, A.G., Ortega, J.A., Henao, H.: ‘Bearing
features and neural networks’, IEEE Trans. Ind. Electron., 2013, 60, (8),
pp. 3398–3407
5 Rauber, T.W., Assis Boldt, F., Varejao, F.M.: ‘Heterogeneous feature models and
feature selection applied to bearing fault diagnosis’, IEEE Trans. Ind. Electron.,
doi: 10.1109/TIE.2014.2327589
6 Kia, S.H., Henao, H., Capolino, G.A.: ‘Diagnosis of broken-bar fault in induction
machines using discrete wavelet transform without slip estimation’, IEEE Trans.
7 Bouzida, A., Touhami, O., Ibtiouen, R., Belouchrani, A., Fadel, M., Rezzoug, A.:
transform’, IEEE Trans. Ind. Electron., 2011, 58, (9), pp. 1395–1404
8 Huang, N.E., Shen, Z., Long, S.R., et al.: ‘The empirical mode decomposition and
the Hilbert spectrum for nonlinear and non-stationary time series analysis’,
Proc. R. Soc. Lond. A, Math. Phys. Sci., 1998, 454, (1971), pp. 903–995
9 Rai, V.K., Mohanty, A.R.: ‘Bearing fault diagnosis using FFT of intrinsic mode
10 Bin, G.F., Gao, J.J., Li, X.J., Dhillon, B.S.: ‘Early fault diagnosis of rotating
extraction and neural network’, Mech. Syst. Signal Process., 2012, 27, pp. 696–711
11 Liu, Z., Cao, H., Chen, X., He, Z., Shen, Z.: ‘Multi-fault classification based on
wavelet SVM with PSO algorithm to analyze vibration signals from rolling
12 Meng, L., Xiang, J., Wang, Y., Jiang, Y., Gao, H.: ‘A hybrid fault diagnosis
14 He, D., Li, R., Zhu, J., Zada, M.: ‘Data mining based full ceramic bearing fault
diagnostic system using AE sensors’, IEEE Trans. Neural Netw., 2011, 22, (12),
pp. 2202–2031
15 Lei, Y., He, Z., Zi, Y.: ‘Application of an intelligent classification method to
mechanical fault diagnosis’, Expert Syst. Appl., 2009, 36, (6), pp. 9941–9948
16 Lei, Y., He, Z., Zi, Y., Hu, Q.: ‘Fault diagnosis of rotating machinery based on
multiple ANFIS combination with Gas’, Mech. Syst. Signal Process., 2007, 21,
17 Buades, A., Coll, B., Morel, J.M.: ‘A review of image de-nosing algorithms, with a
18 Van, M., Kang, H.J., Shin, K.S.: ‘Rolling element bearing fault diagnosis based on
nonlocal means de-noising and empirical mode decomposition’, IET Sci. Meas.
19 Widodo, A., Yang, B.S., Han, T.: ‘Combination of independent component and
genetic algorithms’, IEEE Trans. Evol. Comput., 2000, 4, (2), pp. 164–171
21 Kennedy, J., Eberhart, R.C.: ‘Particle swarm optimization’. Proc. IEEE Int. Conf.
22 Huang, C.L., Dun, J.F.: ‘A distributed PSO–SVM hybrid system with feature
23 Yuan, S.F., Chu, F.L.: ‘Fault diagnostics based on particle swarm optimization and
support vector machine’, Mech. Syst. Signal Process., 2007, 21, (4), pp. 1787–1798
24 Xue, B., Zhang, M., Browne, W.N.: ‘Particle swarm optimization for feature
25 Peng, H., Fulmi, L., Ding, C.: ‘Feature selection based on mutual information
26 Uncu, O., Turksen, I.B.: ‘A novel feature selection approach: combining feature
wrappers and filters’, Inf. Sci., 2007, 177, (2), pp. 449–466
27 Cover, T.M., Hart, P.E.: ‘Nearest neighbor pattern classification’, IEEE Trans. Inf.
28 He, D., Li, R., Zhu, J.: ‘Plastic bearing fault diagnosis based on a two-step data
mining approach’, IEEE Trans. Ind. Electron., 2013, 60, (8), pp. 3429–3440
pp. 109–118
30 Seshadrinath, J., Singh, B., Panigrahi, B.K.: ‘Vibration analysis based interturn
fault diagnosis in induction machines’, IEEE Trans. Ind. Inf., 2014, 10, (1),
pp. 340–350
31 Corts, C., Vapnik, V.: ‘Support vector networks’, Mach. Learn., 1995, 20, (3),
pp. 273–297
33 Abbasio, S., Rafsanjani, A., Farshidianfar, A., Irani, N.: ‘Rolling element bearings
machine’, Mech. Syst. Signal Process., 2007, 21, (7), pp. 2933–2945
34 Li, P., Jiang, Y., Xiang, J.: ‘Experimental investigation for fault diagnosis based on
a hybrid approach using wavelet packet and support vector classification’, Sci.
35 Loparo, K.A.: ‘Bearing data center’ (Case Western Reserve University). Available
36 Hong, Y.Y., Bao, Y.Q.: ‘FPGA implementation for real-time empirical mode
decomposition’, IEEE Trans. Instrum. Meas., 2012, 61, (12), pp. 3175–3184
37 Wai, R.J., Lee, J.D., Chuang, K.L.: ‘Real-time PID control strategy for Maglev
Ref 5
manifold learning,” Journal of Sound and Vibration, Vol. 332, No. 7, pp.
1881-1894, 2013.
[3] X. H. Li, M. P. Jia, and F. Y. Xu, “Spectrum Analysis and Its Application
to Gearbox Fault Diagnosis,” Journal of Vibration, Measurement and
[6] B. P. Tang, J. M. Xi, and F. Li, “Fault diagnosis for rotating machinery
[7] M. J. Li, A. Luo, and D. S. Tong, “Artificial immune algorithm and its
application,” Control Theory and Applications, Vol. 21, No. 2, pp. 153-
157, 2004.
[9] L. Breiman, “Random forests,” Machine Learning, No. 45, pp. 32-32,
2001.
[14] J. J. Chen and Xu Bing, “Fault diagnosis for rolling bearing based on
[15] L. Liu, S. Li, and Y. Q. Wang, “EEG signal denoising and feature
[17] H. Li, Z. Li, and K. She, “An improvement of random forests algorithm
Ref for FS
[17] X. Jin, M. Zhao, T. Chow, and M. Pecht, “Motor bearing fault diagnosis
for pattern classifiers,” Pattern Recognition, vol. 33, no. 1, pp. 25 – 41,
2000.
[19] J. Xu, G. Yang, H. Man, and H. He, “L 1 graph based on sparse coding
[20] J. Xu, Y. Yin, H. Man, and H. He, “Feature selection based on sparse
1962.
Ref EMD
[8] G. F. Bin, J. J. Gao, X. J. Li, and B. S. Dhillon, “Early fault diagnosis of rotating
machinery based on wavelet packets—Empirical mode decomposition feature extraction
and neural network,” Mech. Syst. Signal Process., vol. 27, pp. 696–711, Feb. 2012.
[9] D. Yu, J. Cheng, and Y. Yang, “Application of EMD method and Hilbert spectrum to
the fault diagnosis of roller bearings,” Mech. Syst. Signal Process., vol. 19, no. 2, pp.
259–270, Mar. 2005.
[10] M.-T. Lo, V. Novak, C.-K. Peng, Y. Liu, and K. Hu, “Nonlinear phase interaction
between nonstationary signals: A comparison study of methods based on Hilbert-Huang
and Fourier transforms,” Phys. Rev. E, vol. 79, no. 6, Jun. 2009.
[11] V. K. Rai and A. R. Mohanty, “Bearing fault diagnosis using FFT of intrinsic mode
functions in Hilbert–Huang transform,” Mech. Syst. Signal Process., vol. 21, no. 6, pp.
2607–2615, Aug. 2007.
[12] Y. Lei, J. Lin, Z. He, and M. J. Zuo, “A review on empirical mode decomposition in
fault diagnosis of rotating machinery,” Mech. Syst. Signal Process., vol. 35, no. 1–2, pp.
108–126, Feb. 2013.
[19] Y. Li, M. Xu, Y. Wei, and W. Huang, “An improvement EMD method based on the
optimized rational Hermite interpolation approach and its application to gear fault
diagnosis,” Measurement, vol. 63, pp. 330–345, Mar. 2015.
[20] L. Lin and J. Hongbing, “Signal feature extraction based on an improved EMD
method,” Measurement, vol. 42, no. 5, pp. 796–803, Jun. 2009