Documente Academic
Documente Profesional
Documente Cultură
Note: Review Machine & S·O·S History and check for Active Service Letters prior to inspection.
Is PL activated?
Is PL functioning properly?
1.9
1.10
2.10
2.11
2.12
2.13
3.10 Fenders
3.13
3.14
3.15
4.4 Upper radiator, air inlet, oil cooler, and aftercooler lines
4.9 Turbocharger
4.15
4.16
4.17
5.9
5.10
5.11
6. Site Conditions
# Status Description
6.1 Ambient Temperature
NORMAL: Flat
MONITOR: Mild
ACTION: Steep
6.5 Humidity
MONITOR: 25 to 60%
NORMAL: No Dust
NORMAL: 0 to 10 Hours
NORMAL: Utility
MONITOR: Support
ACTION: Production
NORMAL: Excellent
MONITOR: Good
ACTION: Poor
6.12 Primary Industries
6.13
6.14
6.15
6. Site Conditions
Other Visual Remarks
Wheel Loader TA1 Inspection Reference
Inspection Benefits:
Minimizes downtime through scheduled maintenance
Locates potential problems
Finds overlooked problems
Enables scheduled maintenance and repairs
Lowers owning and operating costs
Guidelines:
Wiring Harness Inspection Guidelines
Check for tubes, hoses, and wiring harnesses rubbing against:
One another
Sharp corners
Bolt heads
Check for tubes, hoses, and wiring harness not properly secured:
Missing clips and/or wire ties
P-clips not attached
1. Inspection Preparation:
3 Middle-Level Inspections:
4. Upper-Level Inspections:
5. Implement/Attachment Inspections:
1. Performance Checks
1.1 Hydraulc Performance Checks
Status Description Units Observed Specified (+)Tol (-)Tol Comments
1.1.1 1.1.1 Implement Cycle Time - Check
Lift Raise
Lift Lower
Float
Tilt Back
Dump
1.1.2 1.1.2 Lift & Tilt Cylinder Drift - Check Units Observed Oil Temperature Ranges
Units Observed Maximum Allowable Minimun Allowable Minimun Allowable Minimun Allowable
Movement Time (sec) Time (sec) Time (sec)
Lift Cylinder
Tilt Cylinder
1.2 Brake Performance Checks
*Status Description Units Observed Specified (+)Tol (-)Tol Comments
1.2.1 Brake Accumulator - Test (Test from OMM)