Documente Academic
Documente Profesional
Documente Cultură
Shutdown SIS
Previous Screen
Product: INDUSTRIAL ENGINE
Model: 3508 INDUSTRIAL ENGINE 68Z00737
Configuration: 3508 Industrial Engine 68Z00694-01092
i01076334
Test each component of the electrical protection system in order to determine that all of the
components work properly. Use the tables below to determine if the components are working
properly. The tests should be performed on an engine that is started for the first time and at
recommended service intervals. The service intervals are provided in the Operation and Maintenance
Manual.
If a problem occurs, refer to the index for the correct troubleshooting procedures. In order to
determine the correct engine rpm, refer to the speed specification chart in the Testing and Adjusting
section.
25 + 5 rpm less than 75% Overspeed Press the 75% Verify No engine
A
Verify rpm button shutdown
25 + 5 rpm more than 75% Overspeed Press the 75% Verify Air and fuel shutoff
B
Verify rpm button
Manually reset the air shutoff lever at the top of the air inlet, if equipped. Press the ESS
C
reset button.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 8/10/2018
3508 Industrial Engine 68Z00694-01092(SEBP1575 - 51) - Documentation Page 2 of 3
Any rpm above the crank Press the push button for the Air and fuel
A
terminate rpm emergency stop switch shutoff
Manually reset the air shutoff lever at the top of the air inlet, if equipped. Turn ES switch in
B
the dirction that is shown on the face of the push button in order to reset the switch.
Any rpm above the crank terminate Push the normal stop switch
A Fuel shutoff
rpm (NSS)
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 8/10/2018
3508 Industrial Engine 68Z00694-01092(SEBP1575 - 51) - Documentation Page 3 of 3
A Any rpm above the crank Place a jumper across terminals OPS1-1 Fuel shutoff
terminate rpm and OPS1-3.
B Remove the jumper from terminals OPS1-1 and OPS1-3.
Copyright 1993 - 2018 Caterpillar Inc. Fri Aug 10 11:24:54 UTC+0200 2018
All Rights Reserved.
Private Network For SIS Licensees.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 8/10/2018