Documente Academic
Documente Profesional
Documente Cultură
PERANCANGAN KULIAH
LECTURE PLAN
Nama Pensyarah (Lecturer’s name) : Dr. Mohd Hanif Bin Ismail - Section 1 (Penyelaras)
Dr. Nurazuwa Bt Md Noor- Section 1
Prof. Ir. Dr. Abdul Aziz Bin Dato’ Abdul Samad – Section 2 ,3 & 5
En. Ahmad Fahmy Bin Kamarudin – Section 4 & 7
Dr. Sharifah Salwa Bt Mohd Zuki - Section 5
Dr. Muhammad Nizam Bin Zakaria- Section 6
Dr. Ahmad Zurisman Bin Mohd Ali – Section 7
Tandatangan(Signature): Tandatangan(Signature):
Nama(Name): Dr. Mohd Hanif B Ismail Nama(Name): Dr. Ahmad Zurisman Bin Mohd Ali
To provide students with sufficient knowledge and understanding on stress and strain analysis, able to draw
shear force diagram and bending moment diagram, calculate deflection for statically determinate beam,
analyzing compression members and torsion, and able to determine the internal forces for statically
determinate plane trusses.
SINOPSIS(SYNOPSIS) :
Mechanics is the body of knowledge that deals with the relationships between forces and the motion of points
through space, including the material space. Material science is the body of knowledge that deals with the
properties of materials, including their mechanical properties. This course introduces students to simplify the
affect of material and geometric properties when the structure is loaded with outside and internal forces. Scope
of this course includes the analysis and design of structural members subjected to axial loads, torsion and
bending, as well as such fundamental concepts as stress and strain, deflections of beams, behaviour of columns
and statically determinate plane truss.
8.0 TORSION
8.1 Torsion theory
14 8.2 Torsion of cylindrical member Final Exam
8.3 Torsion of non-cylindrical member
Prepare a group report according to the project that been carried out in identifying the strength of the structure.
All assessments are based on project’s rubric developed by Faculty of Civil and Environmental Engineering,
UTHM.
PENILAIAN (ASSESSMENT) :
1. Kuiz(Quiz) : 5%
2. Tugasan(Assignment) : 5%
3. Projek(Project) : 20%
4. Ujian 1(Test 1) : 10 %
5. Ujian 2(Test 2) : 10 %
6. PeperiksaanAkhir(Final Examination) : 50 %
Jumlah(Total) : 100 %
1. Ferdinand P. Beer, E. Russell Johnston, John T. Dewolf, David F. Mazurek, 6th Edition (Global Edition)
Mechanics of Materials, McGraw-Hill Boston, MA:, 2012
2. Hibbler, R.C., Mechanics of Materials, 9th Edition, Pearson, 2013
3. James M. Gere, Barry J. Goodno ; Mechanics of Materials, Wadsworth/ Cengage Learning, New York:
2009
4. Ansel C. Ugural ; Mechanics of Materials, Hoboken, NJ: John Wiley, 2008
5. William F. Riley, Leroy D. Sturges and Don H. Morris.; Mechanics of Materials, Wiley Hoboken, NJ:
John, 2007
6. James M. Gere ; Mechanics of materials, Thomson Australia:, 2006