Documente Academic
Documente Profesional
Documente Cultură
This version of Xentry is the latest version that C3 MUX supported 100%.
Software requirements:
1) Windows XP Service Pack 3
2) Partition manager
4) Winrar
8) SDMedia 1 2014
______________________________________________________________________________________
A big thanks to all the folks that provide us all the fixes and solutions for all the errors!!! Without them
this guide wouldn’t be possible! It’s not necessary to add all the name here. They know who they are!
• login to STAR
D: 30 GB (RECOVER)
E: 50 GB (WIS)
F: 50 GB (DAS)
Note: letters are extremely important. NTFS is mandatory...use Default allocation size
• Restart is required to apply partitions by partition manager program...
Winrar [wrar400.exe]
NOTE: If you have 120GB HHD then create the following partitions:
C : 30 GB
D: 10 GB
E: 45 GB
F: 35 GB
PHASE 1 COMPLETED
______________________________________________________________________________
1. Go to Newguide2j folder
5. Go to Newguide2j folder
6. Click “prepare.bat” batch (follow commands..10 steps will be executed).system will be restarted
PHASE 2 COMPLETED
______________________________________________________________________________
Phase 3: (DVD1 Xentry installation)
4. Insert keys for Xentry and WIS and Das with the following considerations:
• BE aware to tick expiry date for the keys and set it forward eg. 01/01/2020
• keys need information as Hardware id and App id and LAN id....Copy them correctly form
the startkey to generate the right key
• click save
• if it is correct and saved u will notify that validity appeared after clicking save
Possibly errors: If you get an error for Xentry Diagnose for saving the key
Solution:
Then go to “C:\WINDOWS\ZAK\Starutils” delete the existing “CommonLic.dll” and copy the one
from folder “Fixes\FOR-XENTRY-KEY-ERROR\CommonLic_2011-06-19-[For Xentry Key Error
Saving]” and paste it in the above folder. After that restart Star Utilities and generate a new key
and now the key will be saved without problems.
2. click setup.exe
4. Choose Language. If you choose different language from you windows language then PC will
restart. After that re-launch DVD1 to virtual drive and run again setup.exe
6. Setup will pop up that no startkey click yes...setup will launch Start Key Center now with new
appearance
7. Insert new key using Xentry key generator (Xentry Developer (1).exe) with Appid 253 and NEW
hardware id...Save key...
Possibly errors: “star key center (SC0003E)”
Solution:
NOTES:
• Setup will need to restart. This is ordinary. After restart launch setup again as previous if not
launched automatically
10. DVD1 complete successfully and setup will require DVD2 after restart
PHASE 3 COMPLETED
______________________________________________________________________________
After restart, run from Desktop “Star Utilities” and when it opens, press “Star Key Center” button to
check if it’s ok.
Solution: From folder “SKC_SETUP” run “SETUP.EXE” and choose to repair the installation. Now Star Key
Center should run without problems.
1. mount DVD2
3. Click setup.exe
5. Wait☺
6. Setup will complete and require YOU to click finish to restart...DON’T CLICK FINISH!!
7. Go to Newguide2j
9. Return to Xentry setup and now click Finish. System will restart and hot fixes installation begins.
10. Wait until hot fixes finish, then system will be completely loaded
NOTE:
• Setup will need to restart...This is ordinary. After restart launch setup again as previous if not
launched automatically
PHASE 4 COMPLETED
1. Navigate to: Control panel > System > Hardware > Device manager > Ports (COM & LPT). Right
click on that COM port you have left enabled and select Properties.
Go to Port Settings tab and set these values:
Bits per second: 115200
Data bits: 8
Parity: None
Stop bits: 1
Flow Control: None
Then click on Advanced... button and make sure Use FIFO buffers are checked and COM Port
Number is set to COM2.
Press OK and close Device manager.
THIS for Part D
3. Apply bin fixes [ALL BIN_T_D_D2 09.2014] for your version of MUX.
5. From DAS AddONs 9.2014 run mb_add_installer_v1.exe and press install (wait to finish)
PHASE 5 COMPLETED
_____________________________________________________________________________
2. Run “setup.exe” from the main folder and wait the installation to complete
3. ENJOY!!
This guide is provided by lallasgr/kalatopas after a lot of reading and searching in forums
I hope that you will be able to install Xentry 09.2014 without problems