Documente Academic
Documente Profesional
Documente Cultură
Some things to note that seem to have crept into the whole APOS/HAIN thing. Note this is referring to the
new DP IP addresses 172.21.101.xxx, or 172.22.101.xxx
1. If you are using only 1 OS, then trainer in SysconfhprU.cdb has to be True. If you have more than one
OS then they ALL have to set to False.
2. In the HAINconfig.ini file set the Client Address as follows: ClientAddress = 230.21.11.176 # if
present uses unicast, otherwise multicast is used. We recommend multicast.
3. Set the adapter address to the IP of the network card in the HAIN computer. As
follows.AdapterAddress = 172.21.101.188
4. Set the Receive Address in APOS (under HAIN network set up) to the same.
Port addresses.
These are the same
as in the
HAINcofig.ini but
swapped
5.