Documente Academic
Documente Profesional
Documente Cultură
Contents
1. Model geometry........................................................................................................................................................ 5
1.1. Joint coordinates............................................................................................................................................... 5
1.2. Joint restraints................................................................................................................................................. 10
1.3. Element connectivity....................................................................................................................................... 12
2. Material properties.................................................................................................................................................. 19
3. Section properties................................................................................................................................................... 20
3.1. Frames............................................................................................................................................................ 20
3.2. Areas............................................................................................................................................................... 21
3.3. Solids.............................................................................................................................................................. 22
4. Load patterns.......................................................................................................................................................... 22
4.1. Definitions....................................................................................................................................................... 22
5. Load cases.............................................................................................................................................................. 23
5.1. Definitions....................................................................................................................................................... 23
5.2. Static case load assignments.......................................................................................................................... 23
5.3. Response spectrum case load assignments................................................................................................... 23
6. Load combinations.................................................................................................................................................. 24
7. Structure results...................................................................................................................................................... 25
7.1. Mass summary................................................................................................................................................ 25
7.2. Modal results................................................................................................................................................... 36
7.3. Base reactions................................................................................................................................................ 36
8. Joint results............................................................................................................................................................. 36
9. Frame results.......................................................................................................................................................... 49
10. Area results......................................................................................................................................................... 281
11. Material take-off................................................................................................................................................... 302
12. Design preferences............................................................................................................................................. 303
12.1. Steel design................................................................................................................................................ 303
12.2. Concrete design.......................................................................................................................................... 303
12.3. Aluminum design......................................................................................................................................... 303
12.4. Cold formed design..................................................................................................................................... 304
13. Design overwrites................................................................................................................................................ 304
13.1. Concrete design.......................................................................................................................................... 304
14. Design summary................................................................................................................................................. 310
14.1. Concrete design.......................................................................................................................................... 310
List of Figures
Figure 1: Finite element model...................................................................................................................................... 5
Figure 2: Deformed shape........................................................................................................................................... 25
List of Tables
Table 1: Joint Coordinates............................................................................................................................................. 5
Table 2: Joint Restraint Assignments.......................................................................................................................... 10
Table 3: Connectivity - Frame...................................................................................................................................... 12
Table 4: Frame Section Assignments.......................................................................................................................... 15
Table 5: Connectivity - Area......................................................................................................................................... 17
Table 6: Area Section Assignments............................................................................................................................. 18
Table 7: Material Properties 02 - Basic Mechanical Properties................................................................................... 19
Table 8: Material Properties 03a - Steel Data.............................................................................................................. 19
Table 9: Material Properties 03b - Concrete Data....................................................................................................... 19
1. Model geometry
This section provides model geometry information, including items such as joint coordinates, joint restraints, and
element connectivity.
12 LOSA Default
13 LOSA 2 Default
14 LOSA 2 Default
36 LOSA Default
37 LOSA 2 Default
38 LOSA 2 Default
39 LOSA Default
40 LOSA 2 Default
41 LOSA 2 Default
42 LOSA Default
43 LOSA 2 Default
44 LOSA 2 Default
45 LOSA Default
46 LOSA 2 Default
47 LOSA 2 Default
48 LOSA Default
49 LOSA 2 Default
50 LOSA 2 Default
51 LOSA Default
52 LOSA 2 Default
53 LOSA 2 Default
54 LOSA Default
55 LOSA 2 Default
56 LOSA 2 Default
2. Material properties
This section provides material property information for materials used in the model.
3. Section properties
This section provides section property information for objects used in the model.
3.1. Frames
CABEZAL 1. 1. 1. 1. 1. 1. 1. 1.
COLUMNAS 1. 1. 1. 1. 1. 1. 1. 1.
PILOTES 1. 1. 1. 1. 1. 1. 1. 1.
VIGA TIPO IV 1. 1. 1. 1. 1. 1. 1. 1.
ZAPATA 1. 1. 1. 1. 1. 1. 1. 1.
3.2. Areas
LOSA 1. 1. 1. 1. 1. 1. 1.
LOSA 2 1. 1. 1. 1. 1. 1. 1.
LOSA 1. 1.
LOSA 2 1. 1.
3.3. Solids
4. Load patterns
This section provides loading information as applied to the model.
4.1. Definitions
DEAD Dead 1.
QUAKE Quake 0. None
VHE1 Vehicle Live 0.
5. Load cases
This section provides load case information.
5.1. Definitions
DEAD Non-
Composite
ACASE1 Other
MODAL Short-Term
Composite
QUAKE Short-Term
Composite
HL-93 Short-Term
Composite
QUAKE 0.05
6. Load combinations
This section provides load combination information.
7. Structure results
This section provides structure results, including items such as structural periods and base reactions.
8. Joint results
This section provides joint results, including items such as displacements and reactions.
9. Frame results
This section provides frame force results.
1 Program Program 0. 0. 0.
Determined Determined
2 Program Program 0. 0. 0.
Determined Determined
3 Program Program 0. 0. 0.
Determined Determined
4 Program Program 0. 0. 0.
Determined Determined
5 Program Program 0. 0. 0.
Determined Determined
6 Program Program 0. 0. 0.
Determined Determined
7 Program Program 0. 0. 0.
Determined Determined
8 Program Program 0. 0. 0.
Determined Determined
9 Program Program 0. 0. 0.
Determined Determined
10 Program Program 0. 0. 0. 0. 0.
Determined Determined
11 Program Program 0. 0. 0. 0. 0.
Determined Determined
12 Program Program 0. 0. 0. 0. 0.
Determined Determined
1
2
3
4
5
6
7
8
9
10 0. 0. 0. 0. 0. 0.
11 0. 0. 0. 0. 0. 0.
12 0. 0. 0. 0. 0. 0.
13 0. 0. 0. 0. 0. 0.
14 0. 0. 0. 0. 0. 0.
15 0. 0. 0. 0. 0. 0.
16 0. 0. 0. 0. 0. 0.
17 0. 0. 0. 0. 0. 0.
18 0. 0. 0. 0. 0. 0.
19 0. 0. 0. 0. 0. 0.
20 0. 0. 0. 0. 0. 0.
21 0. 0. 0. 0. 0. 0.
22 0. 0. 0. 0. 0. 0.
23 0. 0. 0. 0. 0. 0.
24 0. 0. 0. 0. 0. 0.
25 0. 0. 0. 0. 0. 0.
26 0. 0. 0. 0. 0. 0.
27 0. 0. 0. 0. 0. 0.
28 0. 0. 0. 0. 0. 0.
29 0. 0. 0. 0. 0. 0.
Table 38: Concrete Design 1 - Column Summary Data - ACI 318-08/IBC2009, Part 1 of 2
Table 38: Concrete Design 1 - Column Summary Data - ACI 318-08/IBC2009, Part 1 of 2
Frame Location DesignSect PMMCombo PMMArea PMMRatio VMajCombo VMajReba
r
m m2 m2/m
10 0. PILOTES COMB1 COMB1
10 10.75 PILOTES COMB1 COMB1
10 21.5 PILOTES COMB1 COMB1
11 0. PILOTES COMB1 0. COMB1
11 10.75 PILOTES COMB1 0. COMB1
11 21.5 PILOTES COMB1 0. COMB1
12 0. PILOTES COMB1 COMB1
12 10.75 PILOTES COMB1 COMB1
Table 38: Concrete Design 1 - Column Summary Data - ACI 318-08/IBC2009, Part 2 of 2
Table 38: Concrete Design 1 - Column Summary Data - ACI 318-08/IBC2009, Part 2 of 2
Frame VMinCombo VMinReba Status ErrMsg WarnMsg
r
m2/m
10 COMB1 See ErrMsg The required column No Messages
flexural reinforcing
exceeds maximum limit.;
Shear stress exceeds
maximum allowed.;
Shear stress exceeds
maximum allowed.
10 COMB1 See ErrMsg The required column No Messages
flexural reinforcing
exceeds maximum limit.;
Shear stress exceeds
maximum allowed.;
Shear stress exceeds
maximum allowed.
10 COMB1 See ErrMsg The required column No Messages
flexural reinforcing
exceeds maximum limit.;
Shear stress exceeds
maximum allowed.;
Shear stress exceeds
maximum allowed.
11 COMB1 See ErrMsg Shear stress exceeds No Messages
maximum allowed.;
Shear stress exceeds
maximum allowed.
11 COMB1 See ErrMsg Shear stress exceeds No Messages
maximum allowed.;
Shear stress exceeds
maximum allowed.
11 COMB1 See ErrMsg Shear stress exceeds No Messages
maximum allowed.;
Shear stress exceeds
maximum allowed.
12 COMB1 See ErrMsg The required column No Messages
flexural reinforcing
exceeds maximum limit.;
Shear stress exceeds
maximum allowed.;
Shear stress exceeds
maximum allowed.
12 COMB1 See ErrMsg The required column No Messages
flexural reinforcing
exceeds maximum limit.;
Shear stress exceeds
maximum allowed.;
Shear stress exceeds
maximum allowed.
12 COMB1 See ErrMsg The required column No Messages
flexural reinforcing
exceeds maximum limit.;
Shear stress exceeds
maximum allowed.;
Shear stress exceeds
maximum allowed.
Table 39: Concrete Design 2 - Beam Summary Data - ACI 318-08/IBC2009, Part 1 of 3
Table 39: Concrete Design 2 - Beam Summary Data - ACI 318-08/IBC2009, Part 1 of 3
Frame DesignSect DesignType Status Location FTopCombo FTopArea
m m2
1 ZAPATA Beam See ErrMsg 0. COMB1
1 ZAPATA Beam See ErrMsg 0.425 COMB1 (Sp)
1 ZAPATA Beam See ErrMsg 0.85 COMB1
1 ZAPATA Beam See ErrMsg 1.275 COMB1
1 ZAPATA Beam See ErrMsg 1.7 COMB1
1 ZAPATA Beam See ErrMsg 1.7 COMB1 (Sp)
1 ZAPATA Beam See ErrMsg 2.16 COMB1 (Sp)
Table 39: Concrete Design 2 - Beam Summary Data - ACI 318-08/IBC2009, Part 2 of 3
Table 39: Concrete Design 2 - Beam Summary Data - ACI 318-08/IBC2009, Part 2 of 3
Frame FBotCombo FBotArea VCombo VRebar TLngCombo TLngArea
m2 m2/m m2
1 COMB1 COMB1 0. COMB1 0.
1 COMB1 (Sp) 0.970582 COMB1 0. COMB1 0.
1 COMB1 (Sp) 1.425886 COMB1 0. COMB1 0.
1 COMB1 (Sp) 3.96413 COMB1 0. COMB1 0.
1 COMB1 (Sp) 7.51875 COMB1 0. COMB1 0.
1 COMB1 COMB1 0. COMB1 7.745135
1 COMB1 COMB1 0. COMB1 7.745135
1 COMB1 COMB1 0. COMB1 7.745135
1 COMB1 (Sp) 34.877315 COMB1 0. COMB1 7.745135
1 COMB1 (Sp) 29.149219 COMB1 0. COMB1 7.745135
1 COMB1 COMB1 0. COMB1 7.745135
1 COMB1 (Sp) 64.053806 COMB1 0. COMB1 7.855648
1 COMB1 (Sp) 17.074114 COMB1 0. COMB1 7.855648
1 COMB1 COMB1 0. COMB1 7.855648
1 COMB1 COMB1 0. COMB1 7.855648
1 COMB1 COMB1 0. COMB1 7.855648
1 COMB1 COMB1 0. COMB1 7.855648
1 COMB1 (Sp) 7.516371 COMB1 0. COMB1 0.
1 COMB1 (Sp) 3.962319 COMB1 0. COMB1 0.
1 COMB1 (Sp) 1.424644 COMB1 0. COMB1 0.
1 COMB1 (Sp) 0.971256 COMB1 0. COMB1 0.
1 COMB1 COMB1 0. COMB1 0.
2 COMB1 COMB1 0. COMB1 0.
2 COMB1 (Sp) 1.01501 COMB1 0. COMB1 0.
2 COMB1 (Sp) 1.381335 COMB1 0. COMB1 0.
2 COMB1 (Sp) 3.919455 COMB1 0. COMB1 0.
2 COMB1 (Sp) 7.473953 COMB1 0. COMB1 0.
2 COMB1 COMB1 0. COMB1 1.868798
2 COMB1 COMB1 0. COMB1 1.868798
2 COMB1 COMB1 0. COMB1 1.868798
2 COMB1 (Sp) 66.988046 COMB1 0. COMB1 1.868798
2 COMB1 (Sp) 85.088844 COMB1 0. COMB1 1.868798
2 COMB1 (Sp) 71.769595 COMB1 0. COMB1 1.868798
2 COMB1 (Sp) 118.722707 COMB1 0. COMB1 2.61615
2 COMB1 (Sp) 63.842776 COMB1 0. COMB1 2.61615
2 COMB1 COMB1 0. COMB1 2.61615
2 COMB1 COMB1 0. COMB1 2.61615
2 COMB1 COMB1 0. COMB1 2.61615
2 COMB1 COMB1 0. COMB1 2.61615
2 COMB1 (Sp) 7.471463 COMB1 0. COMB1 0.
2 COMB1 (Sp) 3.917561 COMB1 0. COMB1 0.
2 COMB1 (Sp) 1.380035 COMB1 0. COMB1 0.
2 COMB1 (Sp) 1.015715 COMB1 0. COMB1 0.
2 COMB1 COMB1 0. COMB1 0.
3 COMB1 COMB1 0. COMB1 0.
3 COMB1 (Sp) 1.054438 COMB1 0. COMB1 0.
3 COMB1 (Sp) 1.341712 COMB1 0. COMB1 0.
3 COMB1 (Sp) 3.879637 COMB1 0. COMB1 0.
3 COMB1 (Sp) 7.433938 COMB1 0. COMB1 0.
Table 39: Concrete Design 2 - Beam Summary Data - ACI 318-08/IBC2009, Part 3 of 3
Table 39: Concrete Design 2 - Beam Summary Data - ACI 318-08/IBC2009, Part 3 of 3
Frame TTrnCombo TTrnRebar ErrMsg WarnMsg
m2/m
1 COMB1 0. The required reinforcing exceeds No Messages
maximum allowed; The required
reinforcing exceeds maximum
allowed
1 COMB1 0. The required reinforcing exceeds No Messages
maximum allowed
1 COMB1 0. The required reinforcing exceeds No Messages
maximum allowed
1 COMB1 0. The required reinforcing exceeds No Messages
maximum allowed
1 COMB1 0. The required reinforcing exceeds No Messages
maximum allowed
1 COMB1 0.576086 The required reinforcing exceeds No Messages
maximum allowed; The required
reinforcing exceeds maximum
allowed
1 COMB1 0.576086 The required reinforcing exceeds No Messages
maximum allowed; The required
reinforcing exceeds maximum
allowed
1 COMB1 0.576086 The required reinforcing exceeds No Messages
maximum allowed; The required
reinforcing exceeds maximum
allowed
1 COMB1 0.576086 The required reinforcing exceeds No Messages
maximum allowed
1 COMB1 0.576086 The required reinforcing exceeds No Messages
maximum allowed
1 COMB1 0.576086 The required reinforcing exceeds No Messages
maximum allowed; The required
reinforcing exceeds maximum
allowed
1 COMB1 0.584306 The required reinforcing exceeds No Messages
maximum allowed
1 COMB1 0.584306 The required reinforcing exceeds No Messages
maximum allowed