Documente Academic
Documente Profesional
Documente Cultură
March 2016
Edition
Company Proile
BAXI SPA has a proud tradition of developing and producing boilers
and heating systems to the highest technological standards.
For over 30 years BAXI SPA has provided a wide range of
cutting-edge solutions, anticipating market evolutions and paying
attention to customer needs.
2
More details and information on the website
By accessing to the www.baxi.it, Reserved Area and then to the Tech Area,
just after a quick registration it is possible to display and download the
following documents:
• Certiications
• Fault Finding List
• General Catalogues
• Instructions Manuals
• PCB Service Instructions
• Spare Parts Catalogues
• Technical Drawings
• Technical INFO
• Technical presentations
Index
Gas condensing boilers 4
Hybrid systems 15
Heat pumps 19
Gas boilers 22
Solar systems 37
Indirect cylinders 39
Water heaters 49
Air Conditioning 55
Technical section 57
Accessories 95
3
Gas condensing boilers
Heating only and combi
- Luna Platinum+ 5
- Luna Duo-tec+ 6
- Prime 7
- Duo-tec Compact+ 8
- Luna3 Avant+ 9
4
Gas condensing boilers
• Removable control panel for wall-hung installation with wide text display,
regulation knob, menu selection buttons and back-lighting;
supplied with the boiler
• Wide modulation ratio up to 1÷10: better eficiency thanks to
reduced switch-on/switch-off of the boiler and noiseless operation
• Gas Adaptive Control (GAC) system: combustion automatic control to
maintain constantly the highest level of eficiency
• Built-in solar control*
• High eficiency full modulating pump
• Complete soundprooing of the generator
• Frontal access for advanced diagnostics
• Ø50 mm lue pipe mod. 24 kW
5
Luna Duo-tec+ ErP
OK
Technical pages 58-94 96-101 103-104 105-107 102, 104,
108, 110
6
Gas condensing boilers
Prime ErP
OK
Technical pages 58-94 96-101 103-104 105-107 102, 104,
108, 110
• Easy to use thanks to the control panel with knobs and back-lighted
LCD display
• Easy to install thanks to the ultra compact dimensions
(700x395x285 mm- knobs included) and to the light weight (26 kg)
• Modulation ratio 1÷5: higher eficiency and noiseless
• High eficiency circulating pump
• Integration with solar system option
• Connection to rigid and lexible Ø 50 mm lue pipe:
solution for chimneys refurbishment
• Connection to collective chimneys with positive pressure
• Functioning with LGP, it can be switched to LPG and propane
air mixture (no transformation kit required)
Dimensions (h x w x d) mm 700x395x279
Net weight kg 26
Gas type Natural gas/LPG/Propane air mix
Power consumption W 89 94
Grade of protection IPX5D IPX5D
(1)
without low restrictor.
7
Duo-tec Compact+ ErP
OK
Technical pages 58-94 96-101 103-104 105-107 102, 104,
108, 110
Dimensions (h x w x d) mm 700 x 400 x 299 700 x 400 x 299 700 x 400 x 299 700 x 400 x 299
Net weight kg 34 34 34 30
Gas type Natural Gas/LPG
(1)
without low restrictor. Power consumption W 73 85 99 85
s
Heating only models are connectable to indirect cylinders. Grade of protection IPx5D IPX5D IPX5D IPX5D
8
Gas condensing boilers
9
Duo-tec Max+ ErP
OK
Technical pages 58-94 96-101 103-104 105-107 102, 104,
108, 110
10
Gas condensing boilers
• Removable control panel for wall-hung installation with wide text display,
regulation knob, menu selection buttons and back-lighting;
supplied with the boiler
• Wide modulation ratio up to 1÷10: better efficiency thanks to
reduced switch-on/switch-off of the boiler and noiseless operation
• Gas Adaptive Control (GAC) system: combustion automatic control to
maintain constantly the highest level of efficiency
• High efficiency full modulating pump
• Stainless steel 40 lt cylinder
• High DHW performances: up to 500 lt in 30 minutes (ΔT 30°C)
• Complete soundproofing of the generator
• Frontal access for advanced diagnostics
• Ø50 mm flue pipe mod. 24 kW
Control panel Modulation ratio
innovative removable control the modulation system
panel distinguished by a clear is able to adapt the
back-lighting and easiness of heat output to the
use, thanks to the navigation energy demanded by
knob and two push-buttons the building.
dedicated to the set of the
comfort and complete
programming of the boiler.
Hydraulic system
Combi with DHW storage
3 way electric diverter valve
Stainless steel premixing burner 24 GA 33 GA
Stainless steel heat exchanger Product code 7219698 7219699
Stainless steel tank Maximum DHW heat input kW 24,7 34
Modulating fan with electronic speed adjusting system
Maximum heating heat input kW 16,5 24,7
Automatic by-pass
Maximum DHW heat output kW 24 33
High eficiency full modulating pump of the heating
circuit with built-in air vent Maximum heating heat output 80/60°C kW 16 24
System to prevent pump and diverter valve sticking Maximum heating heat output 50/30°C kW 17,4 26,1
operating every 24 hours Minimum heating heat output 80/60°C kW 2,4 3,3
Heating circuit relief valve set at 3 bar Minimum heating heat output 50/30°C kW 2,7 3,6
Tank relief valve set at 8 bar
Integrated sanitary 2 litres expansion vessel Load proile XL XL
Sanitary recirculation option Nominal eficiency 80/60°C % 97,7 97,6
Nominal eficiency 50/30°C % 105,4 105,4
Eficiency 30% % 108,9 108,9
Thermoregulation system
Integrated climatic regulation (outdoor sensor NOx class (EN 483) 5 5
available as optional) Minimum working temperature °C -5 -5
Control of multi-zones system option Expansion vessel capacity/pre-charge l/bar 7,5/0,8 7,5/0,8
Room sensor, heating circuit and sanitary timers Heating temperature range °C 25/80 25/80
included in the control panel DHW temperature range °C 35/60 35/60
Tank capacity l 40 40
Tank expansion vessel capacity/pre-charge l/bar 2/2,5 2/,25
Control system Speciic low rate (EN 13203-1) l/min 14,9 18,3
Overheat limit thermostat of the water/lue exchanger
DHW production ΔT 25°C (1) l/min 13,8 18,9
Hydraulic pressure switch to prevent boiler operating
DHW production at discharge ΔT 30°C (1) l/30’ 385 500
in event of low water
Overheat limit thermostat against lues overheat
Electronic temperatures control by NTC sensors Maximum pressure heating circuit bar 3 3
Anti legionella function Maximum pressure DHW circuit bar 8 8
Full anti-frost device Coaxial lue system Ø 60/100 max length m 10 10
Electronic thermometer Dual lue system Ø 80 max length m 80 80
Digital heating circuit pressure gauge Maximum lue mass low rate kg/s 0,012 0,016
Minimum lue mass low rate kg/s 0,001 0,002
Maximum lue temperature °C 80 80
11
Nuvola Duo-tec+ ErP
OK
Technical pages 58-94 96-101 103-104 105-107 102, 104,
108, 110
12
Gas condensing boilers
Power 32 ErP
OK
Technical pages 58-94 96-101 103-104 105-107 102, 104,
108, 110
Duo-tec Compact Technical pages 58-94 96-101 103-104 105-107 102, 104,
108, 110
Dimensions (h x w x d) mm 700 x 400 x 299 700 x 400 x 299 700 x 400 x 299
Net weight kg 34 34 30
Gas type Natural Gas/LPG
(1)
without low restrictor. Power consumption W 85 99 85
s
Heating only models are connectable to indirect cylinders. Grade of protection IPX5D IPX5D IPX5D
14
Hybrid Systems
- CSI-i 16
- CSI-i IN 17
15
CSI-i ErP
OK
Technical pages 64
3
1 high temperature zone
+ 2 low temperature zones
SOLUTIONS
• CSI-i 1 HT+ 1 LT, solar management
• CSI-i 2 LT, solar management
70 °C
Puffer 27 16
27
lt/min lt/min
CSI
*the performance is
referred to the following
use conditions: cold water 40 °C
Tap water
(upper part) 70°C
at 40°C in 20 min* 10 °C
Mains
water
Timing (min) 20’
hydraulic group
metal mesh water ilter G 1”1/4
(it depends on the model)
CSI-i IN ErP
OK
Technical pages 65
N° kW
Days
25 12
The on-off cycles are reduced thanks to
10
20
• the1:7 modulation ratio.
8 Minimum heat output
15 level of a condesing
boiler (30%)
• Beneits:
6
5
output level of
Luna Duo-tec (14%)
• Saving for the user
2
3% 57%
MODULATION < > ON/OFF
0 0
-7 -6 -5 -4 -3 -2 -1 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Installation with 10kW losses at -7°C Outdoor temperature trend Outdoor tempertature
condensing boiler
Stainless steel boiler (150 lt) Metal mesh water ilter G 1”1/4
Duo-tec IN+ 24 GA
Heat pump
Liquid low switch
Control panel PBM-i+ 6 (mod. 624), PBM-i 10
with T 3/4” connection
(mod. 1024)
17
125
225
331 225 125
451
97,5 451
94
70
68
331
BOILER
CYLINDER
2199,5
HYDRAULIC
MODULE
950
(frontal view)
350
frontal view MR Heating flow G1”
view from the inside
RPC
58
US GAS ES 26 1 2 3 4 5 6 7 8 9
ALIM Power supply
75
80 80 80 80 78 ALIM
SCAR GAS Gas inlet G 3/4”
151
MPC
134
A
65 453 MR RC RR RICIRCOLO CSii ING MANDATA RISCALDAMENTO SOLAR IN G MANDATA SOLAR IN G RITORNO CSi
COND Condensate
SANITARIO drainSOLAR IN G MANDATA RISCALD. B.T.1 RISCALDAMENTO B.T.2 RISCALDAMENTO B.T.1 SOL
80 66 94 80 78 RC DHW recirculation
TC Remote control
CSii ING MANDATA POMPA CALORE
SOLAR IN G RITORNO SOLARE
B
view from inside the cabinet
CSii ING RITORNO POMPA CALORE SOLAR IN G MANDATA USCITA SANITARIO GAS ENTRATA SANITARIO
DHW Heating SOLAR IN G MADATA SOLARE
Remote RISCALD. ALTA TEMPER.
recirculation flow LT1 control
Linea di piega
Fold line
C SCARICO VALVOLA
SICUREZZA
Technical cabinet
ARMADIO TECNICO SCARICO
CONDENSA
Pump Pump DHW GAS Cold water Electric
return flow outlet inlet supply
1002 402
Fold line Remote
Safety SOLAR IN G MANDATA USCITA SANITARIO GAS
CSii ING RITORNO POMPA CALORE
control
RISCALD. ALTA TEMPER. ENTRATA SANITARIO
valve drain Condensate
D drain SOLAR IN G MADATA SOLARE
SCARICO VALVOLA
SICUREZZA
2106
182 80 80 80 80 92 76
28 5 35 35 35 5
F O O3 O O O O3
39
3 9
9 O 5
150
O3
70
O
3
51
51
41
28
O
O
O
28
1002
28
28
28
28
28
35
Linealine
di piega 25
Fold 79 35
O
80
Fold line
421
G O
19
28 28
28
28
55 28
35
28
83
O O
O
O
O
64
O
O
O
192
28 35 35 35
O 28 35
58
O O O O O
109
55
51
O
H
88 134 80 66 94 80 128
18 1 2 3 4 5 6 7 8 9
Heat pumps
- PBS-i 20
- PBM-i+ 21
19
PBS-i Technical pages 66
Control panel
to manage the heat pump and the system.
It is able to control additional generators,
DHW, FV, swimming pool…
Accessories
Room thermostat (heating only) KHG71408691
Room thermostat (heating and cooling) 7108088
Metal mesh water ilter G 1 1/4” (compulsory installation) 7112589
Adaption gas itting from 1/4 1/2 to 3/8 5/8 (compulsory for the installation of PBS-i 4/6) 7213864
3-way valve G 1 1/4” with tank sensor for DHW 7213862
DHW tank sensor 7215528
Vibration dampers LNP71004010
Metal template with condensate drain box for the System manager PBS-i version H 7213866
(compulsory installation in case of cooling with fan coil)
Metal template with condensate drain box for the System manager PBS-i version EM 7213865
(compulsory installation in case of cooling with fan coil)
Heating cable for the condensate drain box PBS-i MR (outdoor unit) 7213863
20
Heat pumps
COP (1)
4,01 4,02 4,10
Accessories
Remote control panel for PBM-i+ - compulsory installation. It is possible to install another remote control panel for the second zone 722332
Air temperature outdoor sensor - compulsory installation LNP71004016
DHW tank / puffer sensor LNP71004017
Metal mesh water ilter G 1 1/4” (PBM-i+ 6 / PBM-i+ 10) - compulsory installation 7112589
Metal mesh water ilter G 1 1/2” (PBM-i+ 16) - compulsory installation LNP71004012
Liquid low switch with T 3/4” connection (PBM-i+ 6) - compulsory installation 7114196
Liquid low switch with T 1” connection (PBM-i+ 10) - compulsory installation 7114197
Liquid low switch for pipes from 1” to 8” (PBM-i+ 16) - compulsory installation 7112591
Vibration dampers LNP71004010
3-way diverter valve G1 1/4” DHW production LNP71004007
Outlet electric heater 3kW 230V LNP71004001
Outlet electric heater 3kW 400V LNP71004002
Outlet electric heater 6kW 400V LNP71004003
Outlet electric heater 9kW 400V LNP71004004
21
Gas boilers
Wall hung boilers
Heating only and combi
- Luna3+ 23
Low NOx
- Luna3 Blue+ 24
With storage
- Nuvola3+ 26
With storage
- Nuvola3 Comfort 29
- Nuvola3 BS 40 30
Heating only
- Slim HPS 35
- Slim EF 36
22
Gas boilers
Luna3+ ErP
OK
Technical pages 68-94 103-104 105 102, 104,
108, 110
Load proile XL
Thermoregulation system
Two heating temperatures possible ranges: Maximum eficiency % 91,2
30/85°C, 30/45°C Eficiency at 30% % 90,29
Remote controller and climatic regulator option Minimum working temperature °C -5
Built-in climatic regulation (outdoor sensor Expansion vessel/pre-charge l/bar 8/0,5
available as optional)
Heating system max pressure bar 3
30/85
Heating temperature range °C
Control system 30/45
Overheat limit thermostat for the water/lue DHW temperature range °C 35/60
exchanger DHW production ΔT 25°C l/min 13,7
Hydraulic pressure switch to prevent boiler’s
operating in event of low water Minimum capacity DHW low rate l/min 2
Flue thermostat to ensure safe discharge of lue
Minimum pressure on DHW circuit bar 0,15
products
Electronic temperatures control by NTC sensors Maximum pressure on DHW circuit bar 8
Full anti-frost device Flue tube Ø mm 120
Electronic thermometer Coaxial lue system Ø 60/100 m -
Heating circuit pressure gauge Dual lue system Ø 80 max length m -
Maximum lue mass low rate kg/s 0,019
Minimum lue mass low rate kg/s 0,017
Maximum lue temperature °C 110
Dimensions (h x w x d) mm 760x450x345
Net weight kg 33
Gas type Natural Gas/LPG s
Power consumption W 54
Grade of protection IPX5D
s
For operation with LPG use the conversion kit (injectors) available as optional.
23
Luna3 Blue+ ErP
OK
Technical pages 68-94 103-104 105 102, 104,
108, 110
s
For operation with LPG use the conversion kit (injectors) available as optional.
24
Gas boilers
25
Nuvola3+ ErP
OK
Technical pages 68-94 103-104 105 102, 104,
108, 110
Dimensions (h x w x d) mm 950x600x466
Net weight kg 53
Gas type Natural Gas/LPG
Power consumption W 115
Grade of protection IPX5D
26
Non-ErP gas boilers
Luna3 Comfort Technical pages 68-94 96-101 103-104 105 102, 104,
108, 110
27
Luna3 Technical pages 68-94 96-101 103-104 105 102, 104,
108, 110
28
Non-ErP gas boilers
Nuvola3 Comfort Technical pages 68-94 96-101 103-104 105 102, 104,
108, 110
Primary exchanger made of copper pipes 240 Fi 280 Fi 320 Fi 240 i 280 i
protected with anticorrosion coating Product code Natural Gas CSB 45724358 45728358 45732358 45424358 45428358
60 lt stainless steel cylinder Maximum heat input kW 26,3 30,1 34,5 27,1 31,1
Automatic by-pass
Minimum heat input kW 11,9 11,9 11,9 11,9 11,9
Low energy pump with automatic air vent
System to prevent pump and 3 way valve Maximum heat output kW 24,4 28 32 24,4 28
sticking operating every 24 hours Minimum heat output kW 10,4 10,4 10,4 10,4 10,4
Heating circuit relief valve set at 3 bar
Cylinder relief valve set at 8 bar Maximum eficiency % 92,9 93,1 93,2 90,2 90,6
Built-in sanitary 2 litres expansion vessel Energetic eficiency (92/42/CEE) HHH HHH HHH HH HH
Sanitary recirculation option Eficiency at 30% % 90,4 90,5 90,5 89,4 89,5
Minimum working temperature °C -5 -5 -5 -5 -5
Thermoregulation system Expansion vessel/pre-charge l/bar 7,5/0,5 7,5/0,5 7,5/0,5 7,5/0,5 7,5/0,5
Two heating temperatures possible ranges: Heating system max pressure bar 3 3 3 3 3
30/85°C, 30/45°C Heating temperature range °C
30/85 30/85 30/85 30/85 30/85
Built-in climatic regulation (outdoor sensor 30/45 30/45 30/45 30/45 30/45
available as optional) DHW temperature range °C 35/65 35/65 35/65 35/65 35/65
Control of multi-zones system option Cylinder capacity l 60 60 60 60 60
Room sensor, heating circuit and sanitary Cylinder expansion vessel capacity/pre-charge l/bar 2/3,5 2/3,5 2/3,5 2/3,5 2/3,5
timers included in the control panel Speciic low according to EN 625 l/min 18,2 19 21,5 18,2 19
DHW production ΔT 25°C (1)
l/min 14 16,1 18,3 14 16,1
Control system DHW production at discharge ΔT 30°C (1)
l/30’ 390 450 490 390 450
Overheat limit thermostat for the water/lue
exchanger Maximum pressure on DHW circuit bar 8 8 8 8 8
Hydraulic pressure switch to prevent boiler Flue tube Ø mm - - - 140 140
operating in event of low water Coaxial lue system Ø 60/100 m 4 4 4 - -
Pressure switch to ensure safe discharge Dual lue system Ø 80 max length m 30 30 30 - -
of lue products (fanned lue models)
Maximum lue mass low rate kg/s 0,018 0,018 0,022 0,022 0,024
Flue thermostat to ensure safe discharge
of lue products (open lue models) Minimum lue mass low rate kg/s 0,017 0,018 0,021 0,021 0,021
Electronic temperatures control by NTC sensors Maximum lue temperature °C 134 142 142 110 115
Full anti-frost device
Anti-legionella function Dimensions (h x w x d) mm 950 x 600 x 466
Electronic thermometer Net weight kg 70 70 70 60 60
AFR system, patented by Baxi that allows Gas type Natural Gas/LPG s
the eficiency optimization thanks to a
Power consumption W 190 190 190 110 110
perfect inlet air regulation
(fanned lue models with dual lue system) Grade of protection IPX5D IPX5D IPX5D IPX5D IPX5D
Heating circuit pressure gauge (1)
Without low restrictor.
s
For operation with LPG use the conversion kit (injectors) available as optional.
29
Nuvola3 BS40 Technical pages 68-94 96-101 103-104 105 102, 104,
108, 110
(1)
Without low restrictor.
s
For operation with LPG use the conversion kit (injectors) available as optional.
30
Non-ErP gas boilers
31
Eco5 Compact Technical pages 68-94 96-101 103-104 105 102, 104,
108, 110
32
Non-ErP gas boilers
Control Panel
The new digital control panel with LCD
display and push-buttons, make the boiler’s
working check easy and immediate:
clear and simple symbols allow to show
all boiler’s parameters and anomalies
that may occur
Control system
Combustion control system (GDC) Maximum eficiency % 90,7 92,8 92,9
Overheat limit thermostat for the water/lue Energetic eficiency (92/42/CEE)
exchanger Eficiency at 30% % 90,1 90,3 90,2
Hydraulic pressure switch to prevent boiler’s Minimum working temperature °C -5 -5 -5
operating in event of low water
Expansion vessel capacity/pre-charge l/bar 6/0,5 6/0,5 6/0,5
Electronic temperatures control by NTC sensors
Anti-frost protection of CH circuit Heating system max pressure bar 3 3 3
Anti-scale electronic system Heating temperature range °C 30/76 30/76 30/76
Electronic thermometer DHW temperature range °C 35/55 35/55 35/55
Central heating pressure gauge
DHW production ΔT 25°C l/min 10,3 10,3 13,7
33
Slim Technical pages 68-94 96-101 103-104 105 102, 104,
108, 110
Fanned Open
Fanned lue Open lue
lue lue
1.230 Fi 1.230FiN 1.300 Fi 1.300 FiN 1.150 i 1.230 i 1.300 i 1.230 iN 1.300 iN 1.400 iN (1) 1.490 iN (1) 1.620 iN (1) 2.300 Fi 2.230 i 2.300 i
Product code WSB 43523301 43523347 43530301 43530347 43115301 43123301 43130301 43123347 43130347 43140347 43149347 43162347 43730301 43423301 43430301
Maximum heat input kW 24,5 24,5 33 33 16,5 24,5 33 24,5 33 44,4 54,1 69 33 24,5 33
Minimum heat input kW 13,5 13,5 17 17 9,5 13,5 17 13,5 17 23 27,5 35 17 13,5 17
Maximum heat output kW 22,1 22,1 29,7 29,7 14,9 22,1 29,7 22,1 29,7 40 48,7 62,2 29,7 22,1 29,7
Minimum heat output kW 11,8 11,8 14,9 14,9 8,5 11,8 14,9 11,8 14,9 20,6 24,5 31,6 14,9 11,8 14,9
Maximum eficiency % 90 90 90,3 90,3 90,3 90,2 90 90,2 90 90,1 90 90,1 90,3 90,2 90
Energetic eficiency (92/42/CEE) HH HH HH HH HH HH HH HH HH HH HH HH HH HH HH
Energetic eficiency 30% % 89,6 89,6 88,8 88,8 88,2 88,5 88,5 88,5 88,5 88,8 88,4 88,9 88,8 88,5 88,5
Cast irons sections 4 4 5 5 3 4 5 4 5 6 7 9 5 4 5
Cast irons boiler water capacity l 11,8 11,8 14,6 14,6 9 11,8 14,6 11,8 14,6 17,4 20,2 25,8 14,6 11,8 14,6
Expansion vessel/pre-charge l/bar 10/1 - 10/1 - 10/1 10/1 10/1 - - - - - 10/1 10/1 10/1
Heating system max pressure bar 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
30/85 30/85 30/85 30/85 30/85 30/85 30/85 30/85 30/85 30/85 30/85 30/85 30/85 30/85 30/85
Heating temperature range °C
30/45 30/45 30/45 30/45 30/45 30/45 30/45 30/45 30/45 30/45 30/45 30/45 30/45 30/45 30/45
Cylinder temperature regulation °C 5/65 5/65 5/65 5/65 5/65 5/65 5/65 5/65 5/65 5/65 5/65 5/65 5/65 5/65 5/65
DHW production ΔT 35°C l/min - - - - - - - - - - - - 12,2 9 12,1
DHW production at discharge ΔT 30°C l/30’ - - - - - - - - - - - - 485 366 475
Maximum pressure on DHW system bar - - - - - - - - - - - - 8 8 8
Flue tube Ø mm - - - - 110 130 140 130 140 160 160 180 - 130 140
Coaxial lue system Ø 60/100 max length m 5 5 5 5 - - - - - - - - 5 - -
Dual lue system Ø 80 max length m 20 20 20 20 - - - - - - - - 20 - -
Dimensions height mm 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850
width 350 350 350 350 350 350 350 350 350 350 350 350 650 650 650
depth 600 600 600 600 520 600 680 600 680 635 715 875 600 600 600
Net weight kg 121 111 144 134 89 113 136 103 126 150 174 224 184 155 176
Gas type Natural gas/LPG s
Power consumption W 170 70 170 70 120 120 120 15 15 15 15 15 170 120 120
Grade of protection IPX4D IPX4D IPX4D IPX4D IPX4D IPX4D IPX4D IPX4D IPX4D IPX4D IPX4D IPX4D IPX4D IPX4D IPX4D
* Heating only models are connectable to Slim UB-UB INOX 80/120 lt.
(1)
For 1.400 iN - 1.490 iN - 1.620 iN the windproof lue terminal is compulsory.
s
For operation with LPG use the conversion kit (injectors) available as optional.
34
Non-ErP gas boilers
Heating only
Open lue
1.80 1.99 1.110
Product code WSO 7114600 7114601 7114602
Power output kW 56-78,7 69,9-98,6 74,7-107,9
Power input kW 62,2-87,4 77,7-109,5 85,5-120,5
* with antirefouler
These models are connectable to indirect cylinders.
35
Slim EF Technical pages 76
Heating only
Open lue
1.22 1.31 1.39 1.49 1.61
Product code WSO 7116065 7116066 7116067 7116068 7116069
Power output kW 22 30,5 39,1 48,8 60,7
Power input kW 25 34,8 44,8 55 69,2
Nominal eficiency % 92 92 92 92 92
Number of elements 3 4 5 6 7
Number of burners
2 2 3 3 3
Number of burner injectors
Water content of the cast-iron body 10 13 16 19 22
Maximum pressure in the heating circuit bar 4 4 4 4 4
* with antirefouler
These models are connectable to indirect cylinders.
36
Solar systems
Collectors for forced and natural draft installation 38
37
Collectors for forced draft installation Technical pages 84
Collectors
SB25+V SB25+O SB20+V SB20+O
Product code LSC 61525430 61525330 61520430 61520330
Gross surface m² 2,51 2,51 2,01 2,01
38
Indirect cylinders
Indirect cylinders
- UB - UB inox 40
- UB SC 40
- Slim - Slim UB inox 41
- Combi 80 L - Combi 80 L+ 41
- Indirect cylinders 45
39
UB - UB inox ErP
OK
Technical pages 84 110
UB inox class
UB SC ErP
OK Technical pages 85 110
40
Indirect cylinders
Combi 80 L+ ErP
OK Combi 80 L
• 80 lt stainless steel indirect • 80 lt stainless steel indirect
cylinder connectable to cylinder connectable to
Luna Platinum+ e Luna Duo-tec+ Luna3 Comfort
(heating only models) (heating only models)
• 4 lt expansions vessel kit • Cylinder temperature
included sensor included
• Cylinder temperature • Indirect cylinder temperature
sensor included controlled directly on the
boiler’s control panel
• Indirect cylinder temperature
controlled directly on the • Magnesium anode
boiler’s control panel
• 4 lt expansions vessel kit
• Magnesium anode available as optional
(product code KSL 71408611)
• Connection kit include
+ = Load proi le XL
Luna Platinum+
41
Technical pages 72
Luna Duo-tec+ and Combi 80 L+ ErP
OK
+ = Load proile XL
Luna Duo-tec+
42
Indirect cylinders
LUNA PLATINUM+ 1.32/80L+ COMBI LUNA PLATINUM+ 1.32/120L COMBI LUNA PLATINUM+ 1.32/160L COMBI
LUNA DUO-TEC+ 1.28/80L+ COMBI LUNA DUO-TEC+ 1.28/120L COMBI LUNA DUO-TEC+ 1.28/160L COMBI
43
Luna3 Comfort and Combi 80 L Technical pages 71
+ =
Hydraulic connection kit
for heating only boilers
KHG 71410701
Luna3 Comfort
44
Indirect cylinders
• Tanks range from 200 to 500 lt, single and double coil
• Enamelled vitriied tanks at 850°C to ensure high protection against corrosion
• Insulation made with high-density injected polyurethane foam without CFC
• External rigid case in ABS
• Magnesium anode (2 in models with double coil)
to safeguard the internal tank surface against corrosion
• Electric resistances of 1500 W, 2300 W, 3000 W with adjustable thermostat as option
UBVT 200 UBVT 300
• Compatible with all BAXI boilers and solar systems SC/DC SC/DC
UBVT 200 SC UVBT 200 DC UBVT 300 SC UBVT 300 DC UBVT 400 SC UBVT 400 DC UBVT 500 DC
Product code 7110591 7110592 7110593 7110594 7110595 7110596 7110597
Capacity 200 200 300 300 400 400 500
Dimensions mm 1422,5 x 610 1422,5 x 610 1795,5 x 610 1795,5 x 610 1671,5 x 710 1671,5 x 710 1787 x 760
Insulation thickness mm 50 50 50 50 50 50 50
kWh/24h
Heat losses 1,8 1,8 2,2 2,2 2,6 2,6 3,8
(ΔT=40°C)
Heat transfer coeficient W/K 1,88 1,88 2,29 2,29 2,71 2,71 3,96
kW upper - 24 - 30 - 30 30
Coil heat exchange
(T inlet 80°C - T DHW 10/45°C)
kW lower 36 36 42 42 48 48 63
m3/h upper - 2 - 2 - 2 2
Nominal low rate
m3/h lower 2 2 2 2 2 2 2
mbar upper - 40 - 50 - 50 50
Pressure losses
mbar lower 68 68 80 80 92 92 116
Class
45
Vitriied steel cylinder for DHW Technical pages 86
• Vitriied steel DHW cylinder with single coil exchanger for solar integration
• To be connected to any combi boiler
• Mixing valve and diverter valve supplied with the cylinder
• Solar circulating group supplied with the cylinder
• Solar controller - supplied with the cylinder
• DHW expansion vessel - 8 lt capacity - supplied with the cylinder
• Solar expansion vessel - 18 lt capacity - supplied with the cylinder
46
Indirect cylinders
UB 800 DC* UB 1000 DC* UB 1000 SC* UB 1500 DC* UB 2000 DC* UB 2000 SC*
Product code LSC 71008801 LSC 71010801 LSC 71010701 LSC 71015801 LSC 71020801 LSC 71020701
Dimensions mm 1855 x 990 2105 x 990 2105 x 990 2185 x 1200 2470 x 1300 2470 x 1300
kW upper 40 40 - 47 73 -
Coil heat exchange (T inlet 80°C - T DHW
10/45°C)
kW lower 68 75 75 88 120 112
* Tanks with capacity higher than 500 lt are not subject to energy labelling
Accessories
Electric resistance 1,5 kW for tanks LNC71000036
47
Steel cylinders for integration ErP
OK
Technical pages 88-89
UBPU 100 UBPU 300 UBPU 500 UBPU 500 SC UBPU 800 SC* UBPU 1500 SC*
Product code LSP 71003001 7116702 7116703
Product code LSC 71005301 LSC 71008301 LSC 71015302
Capacity lt 100 300 500
Capacity lt 500 800 1500
Dimensions mm 1100 X 500 1560 x 600 1840 x 600
Dimensions mm 1775 x 850 1800 x 990 2165 x 1200
Weight kg 35 55 100
Weight kg 140 200 285
Maximum working bar 6 6 6
pressure Maximum working pressure bar 6 6 6
Maximum working °C 95 95 95 Maximum working temperature °C 95 95 95
temperature
Insulation soft polyurethane
Insulation injected polyurethane
Insulation thickness mm 100 100 100
Insulation thickness mm 50 50 50
Heat losses kWh/24h (ΔT=40°C) 2,18 2,74 3,89
Heat losses kWh/24h 0,71 1,57 2,11
(ΔT=40°C) Heat transfer coeficient W/K 2,29 2,78 4,05
Heat transfer coeficient W/K 0,98 1,6 2,18 Coil exchange surface m2 lower 1,8 2,6 3,8
Coil heat exchange kW lower 45 65 99
(T inlet 80°C - T DHW 10/45°C)
Coil water content lt lower 10,4 14,6 21,6
UBPT 1000* Nominal low rate m3/h lower 1,9 2,8 4,2
Product code LSC 71010601 DHW production
(T inlet 80°C - T DHW 10/45°C) lt/h lower 1100 1600 2400
Dimensions mm 2110 x 990
Total capacity lt 1000 Pressure losses mbar lower 73 208 700
DHW capacity lt 48 Class
DHW corrugate steel pipe surface m2 7,6
m2 upper 2
Exchange surface
m2 lower 3
kW upper 42 UBTT 300 UBTT 600* UBTT 1000*
Potenza T primario 80°C - T
ACS 10/45 °C kW lower 75 LSC
Product code 7116704 7116705
71010501
lt upper 11,8
Coil water content Dimensions mm 1315 x 700 1775 x 950 2050 x 990
lt lower 16,6
Total capacity lt 300 600 1000
m3/h upper 1,8
Nominal low rate DHW capacity lt 170 170 220
m3/h lower 3,2
Weight kg 140 290 360
lt/h upper 1000
DHW production 80/60°C DHW maximum pressure bar 6 6 6
lt/h lower 1800
Maximum coil pressure bar 6 6 6
lt/h 900
Cylinder maximum temperature °C 95 95 95
DHW production kW 37
Insulation injected soft polyurethane
80/60°C - 10/45°C’’ lt/h 1230 polyurethane
kW 50 Insulation thickness mm 50 100 100
lt/h 1890 Heat losses kWh/24h (ΔT=40°C) 1,57 2,52 2,97
Cylinder maximum temperature
kW 77 Heat transfer coeficient W/K 1,64 2,62 3,09
mbar upper 72 Exchange surface m2 lower 1,2 2,5 3,0
Pressure losses
mbar lower 313 Coil heat exchange
(T inlet 80°C - T DHW 10/45°C) kW lower 29 63 75
NL number (DIN4708) - 4,0
Coil water content lt 6,0 14,4 16,7
Weight kg 315
Nominal low rate m3/h lower 1,2 2,7 3,2
DHW maximum pressure bar 6
DHW production 713 1500 1800
Maximum coil pressure bar 6 m3/h lower
(T inlet 80°C - T DHW 10/45°C)
Cylinder maximum temperature °C 95 Pressure drop lt/h ilower 310 193 315
Heat loss kWh/24h (ΔT=40°C) 3,01 NL number (DIN4708) mbar lower 1,0 2,2 5,0
Heat transfer coeficient W/K 3,15 Class
Insulation soft polyurethane
Insulation thickness mm 100 * Tanks with capacity higher than 500 lt are not subject to energy labelling
48
Waters heaters
Electric water heaters 50
49
Indirect cylinders
50
Water heaters
• Piezoelectric ignition
• Porcelain enamel vitriied steel boiler
• Polyurethane insulation without CFC
• Glass wool insulation (mod. 300 T)
• Thermostatic regulation of the temperature
• Magnesium anode
• Wall hung or loor standing installation
SAG3 50 SAG3 80 SAG3 100 SAG3 115 T SAG3 150 T SAG3 190 T SAG3 300 T
Product code 7116717 7116718 7116719 7116720 7116721 7116722 7116723
Maximum heat input kW 4,6 5,3 5.3 8,2 8,2 8,2 23,2
Maximum heat output kW 3,9 4,4 4,4 6,9 6,9 6,9 19,9
DHW temperature regulation °C 40-70 40-70 40-70 40-70 40-70 40-70 40-70
DHW low rate ΔT 45 °C (15-60 °C) l/h 75 85 85 132 132 132 380
Thermostat • • • • • • •
Gas type Nat. Gas/LPG Nat. Gas/LPG Nat. Gas/LPG Nat. Gas/LPG Nat. Gas/LPG Nat. Gas/LPG Nat. Gas/LPG
Thermometer • • • • • • •
Class
Load proile M M M L L L XL
51
Gas instantaneous Technical pages 93
Ignition electronic with battery electronic with battery piezoelectric electronic with battery electronic with battery
Dimensions (h x l x p) mm 650 x 363 x 245 650 x 363 x 245 592 x 315 x 245 592 x 315 x 245 592 x 315 x 245
Class
Load proile L L M M M
52
Water heaters
COP* 2,88
DHW quantity supplied at a temperature of 40°C (domestic cold water at 10°C)** l 205,2
Class
Load proile L
* * Value for domestic water heating from 10° to 54°C with air in entrance at 15°C temperature.
** Value for air in entrance at 15°C temperature and domestic cold water at 10°C - EN16147
*** Measured at a 2-meters distance.
53
SPC ErP
OK
Technical pages 93
DHW quantity supplied at a temperature of 40°C (domestic cold water at 15° C) l 240 357 358
Maximum length for air connection Ø 160mm / Ø 200mm m 10/20 10/20 10/20
Class
Load proile L XL XL
* Value for domestic water heating from 10° to 51°C with 15°C temperature for air in entrance.
** Measured at a 2-meters distance.
Accessories
Single connection air - vertical
7213894
(2 pieces to be ordered to have the complete kit)
54
Air conditioning
Luna Clima 56
55
Luna Clima ErP
OK
SCOP 4 4 4 4
Weight kg 26 27 38 50
Weight kg 10 10 14 16
SCOP 4 4
Weight kg 40 52
Weight kg 10 10 10
56
Technical Section
Technical drawings 58
Graphs
Flue systems
Technical drawings
Graphs
Flue systems
Condensing gas boilers 58
Hybrid systems 64
Heat pumps 66
Gas boilers 68
Flue systems 77
Solar collectors 84
Indirect cylinders 84
Electric water heaters 90
Gas water heaters 92
Gas instantaneous water heaters - Acquaprojet 93
Floor standing heat pump water heaters 93
57
Condensing gas boilers
Luna Platinum+
Luna Platinum+ 177 6
24 GA, 33 GA, 5,5
5
1.12 GA, 1.18 GA, 4,5
HEAD mH2O
4
A69
max
1.24 GA, 1.32 GA 3,5
3
2,5
MR Heating system low G 3/4” 2
min
US DHW outlet G 1/2” 763 1,5
B 686
1
(for heating only models storage; 0,5
tank low G 3/4”)
200 400 600 800 1000 1200
GAS Gas inlet G 3/4”
FLOW RATE (l/h)
ES Mains water G 1/2”
RR Heating system return G 3/4”
SC Condensing trap possible to
connect on a pipe Ø 21
A Boiler hanging points.
Distance between hanging
53,3
points: 298 mm 41,5
B Distance between hanging
points and hydraulic connections
179
Luna Duo-tec+
Luna Duo-tec+ 177 6
5,5
24 GA, 28 GA, 33 GA, 40 GA, 5
1.12 GA, 1.24 GA, 1.28 GA 4,5
HEAD mH2O
4
max
A69
3,5
3
MR Heating system low G 3/4” 2,5
US DHW outlet G 1/2” min
2
1,5
(for heating only models storage; 1
763
B 686
58
Technical drawings - graphs - lue systems
HEAD mH2O
4,5
100%
US DHW outlet G 1/2” 4
GAS Gas inlet G 3/4” 3,5
85%
ES Mains water G 1/2” 3
RR Heating system return G 3/4” 700
2,5
SC Condensing trap possible 2
to connect on a pipe Ø 22 200 400 600 800 1000
1,5
,5
33,5 65 67
34 5 65
65 6
101
148
Duo-tec Compact+
Duo-tec Compact+ 400
238
6
5,5
20 GA, 24 GA, 124
5
28 GA, 1.24 GA 299
4,5
HEAD mH2O
4
A68
max 3,5
3
MR Heating system low G 3/4” 2,5
US DHW outlet G 1/2” min
2
1,5
B 686
59
Condensing gas boilers
Luna3 Avant+
Luna3 Avant+ 7
240 Fi 6
HEAD mH2O
5
MR Heating system low G 3/4”
4
US DHW outlet G 1/2”
GAS Gas inlet G 3/4” 3
ES Mains water G 1/2” 2
RR Heating system return G 3/4”
SC Condensing trap 200 400 600 800 1000 1200
1
A Boiler hanging points. Distance
FLOW RATE (l/h)
between hanging points: 425 mm
B Distance between hanging points
and hydraulic connections
Duo-tec Max+
Duo-tec Max+ 177 6
5,5
33 GA 5
4,5
HEAD mH2O
4
A69
max 3,5
3
MR Heating system low G 3/4” 2,5
US DHW outlet G 1/2” min
2
1,5
(for heating only models storage;
763
1
B 686
60
Technical drawings - graphs - lue systems
HEAD mH2O
4
max 3,5
3
1 DHW outlet G 1/2” 2,5
2 Mains water G 1/2” min
2
1,5
3 Heating system return G 3/4” 1
4 Heating system low G 3/4” 0,5
5 Gas inlet G 3/4” 200 400 600 800 1000 1200
SC Condensing trap FLOW RATE (l/h)
possible to connect
on a pipe Ø21
SC
bottom view
Nuvola Duo-tec+
Nuvola Duo-tec+ 156,5
6
5,5
16 GA, 24 GA 181
5
4,5
HEAD mH2O
4
max 3,5
3
1 DHW outlet G 1/2” 2,5
2 Mains water G 1/2” min
2
1,5
3 Heating system return G 3/4” 1
4 Heating system low G 3/4” 0,5
5 Gas inlet G 3/4” 200 400 600 800 1000 1200
SC Condensing trap FLOW RATE (l/h)
possible to connect
on a pipe Ø21
SC
bottom view
61
Combi with DHW storage and solar integration
Power 1.32
Heating only
600 720 16
240 132
74
918
1
844
128,5
8 2a zone return (optional) G 3/4’’
70 55 57 55
4
16 Flue Ø 60/100 - (80/125
55 121,5 available as accessory)
254
251
150
112
520 61 436 105,5
7 8
240 720
74
132
1 2 3
4 70 167 128,5
55 121,5
1688
105,5 7
1762
10 11 12
1098
1096
956
994
245 70 40
880
132
70 57
880
55 55
918
920
844
3
1 56 2
128,5
13
55 121,5
251
254
150
112
87
62
Technical drawings - graphs - lue systems
132
1 2 3
4 70 167 128,5
55 121,5
105,5 7 8
2042
1968
15
115 14 10 11 12
157
1378
1410
1236
245 40
1160
70
1375
1274
1116
13
87
1201
1160
1116
70 57
55 55
918
844
3
1 5 62
128,5
13
55 121,5
251
254
150
112
87
63
Non-Erp condensing boilers
Duo-tec Compact
Duo-tec Compact 400
238
20 GA, 24 GA, 124
HEAD mH2O
28 GA, 1.24 GA 299
A69
MR Heating system low G 3/4”
US DHW outlet G 1/2”
B 686
(for heating only models storage;
tank low G 3/4”)
FLOW RATE (l/h)
GAS Gas inlet G 3/4”
ES Mains water G 1/2”
RR Heating system return G 3/4”
SC Condensing trap possible to
connect on a pipe Ø 21
A Boiler hanging points.
70
Distance between hanging
points: 298 mm 40 30
Hybrid Systems
CSI-i
70
80 80 80 80 80 80 80 80 80 80 80 80 80
70
2060
70
70
70
70
1
65
2
65
1
65
2
65
850
70
70
70
70
152
72
868 856 672
Cold water inlet G3/4’’ Heating low 2° low temperature zone G1’’
Heating low high temperature zone G3/4’’ Heat pump return G3/4’’
Heating return high temperature zone G3/4’’ Solar collector low G3/4’’
Heating return 1° low temperature zone G1’’ Solar collector return G3/4’’
64
Technical drawings - graphs - lue systems
Hybrid Systems
CSI-i IN
125
225
331 225 125
451
97,5
451
94
70
68
331
BOILER
2199,5 MPC Pump low (hot water from the heat pump) G1”
HYDRAULIC
RPC Pump return (cold water to the heat pump) G1”
MODULE SCAR Safety valve drain
ES Cold water inlet G 1/2”
US DHW outlet G 1/2”
ALIM Power supply
GAS Gas inlet G 3/4”
(frontal view)
950
COND Condensate drain
350 RC DHW recirculation
TC Remote control
frontal view
view from the inside
A 80 80 80 80 118 B 532
TC 80 80 80 80 78
RC MR RR
26
ALIM TC
MPC
46 70
RPC
58
US GAS ES
83
122
US GAS ES 26
75
80 80 80 80 78 ALIM
SCAR
151
MPC
134
65 453 1 2 3 4 5 6 7 8 9 10 11 12
MR RC RR
A 80 66 94 80 78 CSii ING MANDATA RISCALDAMENTO SOLAR IN G MANDATA SOLAR IN G RITORNO CSii ING RITORNO RISCALDAMENTO
A
RICIRCOLO
SANITARIO SOLAR IN G MANDATA RISCALD. B.T.1 RISCALDAMENTO B.T.2 RISCALDAMENTO B.T.1 SOLAR IN G RITORNO RISCALD. B.T.2 TELECONTROLLO
Linea di piega
Fold line
C SCARICO VALVOLA C
SICUREZZA
Technical cabinet
ARMADIO TECNICO SCARICO
CONDENSA
TELECONTROLLO
Pump Pump DHW GAS Cold water Electric
return flow outlet inlet supply
1002 402
Fold line Remote SOLAR IN G MANDATA SOLAR IN G RITORNO ALIMENTAZIONE
Safety control
RISCALD. ALTA TEMPER. USCITA SANITARIO GAS ENTRATA SANITARIO RISCALD. ALTA TEMPER.
valve drain Condensate CSii ING RITORNO POMPA CALORE ELETTRICA
D drain SOLAR IN G MADATA SOLARE D
182 80 80 80 80 92 76
28 5 35 35 35 5
F O O3 O O O O3 F
39
3 9
9 O 5
150
O3
70
O
3
51
51
41
28
O
O
O
28
1002
28
28
28
28
28
35
Linealine
di piega 25
Fold 79 35
O
80
Fold line
421
G O G
19
28 28
28
28
55 28
35
28
83
O O
O
O
O
64
O
O
O
192
28 35 35 35
O 28 35
58
O O O O O
109
55
51
O
H H
88 134 80 66 94 80 128
1 2 3 4 5 6 7 8 9 10 11 12
65
Heat pumps
LIQUID
LIQUIDO
PBS-i MR 3/4”
G 1/4”
GAS
OUTDOOR UNIT G 1/2”
1/2”
PBS-i 4/6 MR
(weight 42 kg)
LIQUID
LIQUIDO
3/8”
G 3/8”
GAS
G 5/8”
5/8”
HEAD (m H20)
4,0
3,5
3,0 III
2,5
2,0
LIQUID
LIQUIDO 1,5 II
G 3/8”
3/8” 1,0
0,5 I
GAS 0,0
G 5/8”
5/8” 0,00 0,25 0,50 0,75 1,00 1,25 1,50 1,75 2,00 2,25
FLOW RATE (l/h)
PBS-i 11/16 MR
(weight 118 kg)
3
II III
2
SYSTEM MANAGER WEIGHT
1
4/6/8 MR H/EM kg 35 I
0
0,00 0,25 0,50 0,75 1,00 1,25 1,50 1,75 2,00 2,25 2,50
11/16 MR H/EM kg 37 FLOW RATE (l/h)
56,5
SYSTEM MANAGER SYSTEM MANAGER
PBS-i H PBS-i EM
1 Heating return G 1”
2 Heating low G 1”
3 Boiler inlet connection G 1”
(only for System Manager PBS-I H)
4 Boiler outlet connection G 1”
(only for System Manager PBS-I H)
32 32 5 Refrigerant gas itting G 5/8”
2 1 3 4 5 6 2 1 5 6
6 Refrigerant liquid itting G 3/8”
In case of installation
with the condensate
drain pan for
System Manager
PBS-I H/ EM
(compulsory in case of
cooling with fan coil)
66
Technical drawings - graphs - lue systems
Heat pumps
Piedino di fissaggio
PBM-i 6+ 57 43
OUTDOOR UNIT
327
PBM-i 6+
120
110
100
825 73 15,3 300 42 90
80
III
HEAD (kPa)
II
Ingresso 70
acqua 60
I
54
3/4” 50
658
Uscita 40
acqua 30
3/4” 20
388
10
0
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
16
HEAD (kPa)
50
40
30
III
866
20
480
10
I II
0
2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
173
Ingresso acqua 1”
Piedino di fissaggio
PBM-i 16+ 80 80
13
OUTDOOR UNIT
36
356
330
PBM-i 16+
13
1000 24
130
120
110
100
90
III
HEAD (kPa)
40
30
I
680
75
6
411
67
Gas boilers
Luna3+
HEAD mH2O
RR Heating system return G 3/4” 4
A Boiler hanging points. 3,5
3
Distance between hanging points: 2,5
425 mm 2
1,5
B Distance between hanging points 1
and hydraulic connection 0,5
200 400 600 800 1000 1200 1400
FLOW RATE (l/h)
Luna3 Blue+
180 i, 240 i
68
Technical drawings - graphs - lue systems
Gas boilers
Eco5 Compact+ 400
162
24
Ø120 (24 kW)
Ø110 (14 kW)
M.R. Heating system low G 3/4”
A 23
US DHW outlet G 1/2” Eco5 Compact+
GAS Gas inlet G 3/4” 6
ES Mains water G 1/2” 5,5
5
RR Heating system return G 3/4” 4,5
HEAD mH2O
A Boiler hanging points. 730 4
3,5
Distance between hanging B 680
3
points: 343 mm 2,5
B Distance between hanging points 2
1,5
and hydraulic connection 1
0,5
200 400 600 800 1000 1200 1400
FLOW RATE (l/h)
70
65
65
65
65
70
9
14 5,5
2,5
Nuvola3+
Nuvola3+
6
5,5
5
4,5
HEAD mH2O
4
1 Heating system 3,5
low G 3/4” 3
2,5
2 DHW outlet G 1/2” 2
3 Mains water G 1/2” 1,5
1
4 Heating system 0,5
return G 3/4”
200 400 600 800 1000 1200 1400
5 Gas inlet G 3/4” FLOW RATE (l/h)
bottom view
69
Non-ErP gas boilers
Luna3 Comfort Luna3 Comfort Luna3 Comfort 310 Fi - 1.310 Fi
HEAD mH2O
FLOW RATE (l/h)
HEAD mH2O
FLOW RATE (l/h)
MR Heating system low G 3/4”
US DHW outlet G 1/2”
(for heating only models storage tank low G 3/4”)
GAS Gas inlet G 3/4”
ES Mains water G 1/2”
RR Heating system return G 3/4”
A Boiler hanging points.
Distance between hanging points: 425 mm
B Distance between hanging
points and hydraulic connection
Luna3 Luna3
240 Fi, 280 Fi, 310 Fi, 240 i Luna3 310 Fi - 1.310 Fi - 280 Fi - 240 Fi - 240 i
1.310 Fi
HEAD mH2O
188
100
70
Technical drawings - graphs - lue systems
HEAD mH2O
FLOW RATE (l/h)
71
Non-ErP gas boilers
Luna Duo-tec + Combi 80 L+
Ø100
bottom view
72
Technical drawings - graphs - lue systems
HEAD mH2O
Ø100
Nuvola3 BS 40 280
6
HEAD mH2O
4
Ecofour Ecofour
24 F, 1.14 F, 1.24 F 24, 1.14, 1.24 EcoFour
400
400
162
HEAD mH2O
122
B 680
B 680
70 70
65 65
65 65
65 65
65 65
70 70
9 95
14 5,5 1 ,5
2,5
73
Non-ErP gas boilers
Eco5 Compact Eco5 Compact
14 F, 18 F, 24 F, 1.14 F, 1.24 F 24, 1.24 0
40
400
Eco5 Compact
162 6
5,5
184 5
4,5
(mH2O)
Ø100 Ø120 (24 kW) 4
Ø110 (14 kW) 3,5
3
A 23
2,5
A 68
HEAD
2
1,5
1
0,5
200 400 600 800 1000 1200
FLOW RATE (l/h)
730
B623
700
B 680
70 70
65 65
5 65 65
65 6 65
65
70 70
1
16 05 9
14 5,5
2 2,5
Main5
24 F, 18 F, 14 F
400 Main5
184
HEAD mH2O
Ø100
29
9
74
Technical drawings - graphs - lue systems
HEAD mH2O
C
850
481 - 561
507 - 587
H L2
Slim 1.400iN 1490 635
Slim 1.490iN 1490 715
Slim 1.620iN 1650 875
dimensions (mm)
L2
frontal view side view frontal view side view back view
Slim Slim
2.300 Fi 2.230 i, 2.300 i
75
Non-ErP gas boilers
Slim HPS
1.80, 1.99, 1.110 R Heating system return 11/2”
M Heating system low 11/2”
G Gas inlet 1”
S Boiler drain 3/4”
Slim EF
1.22, 1.31, 1.39, 1.49, 1.61
1.22 1.31
P mm 595 720
D mm 130 150
Connections
R Heating system return 1 1/2”
M Heating system low 1 1/2”
G Gas connection 1/2”
Connections
R Heating system return 1 1/4”
M Heating system low 1 1/2”
G Gas connection 3/4”
76
Technical drawings - graphs - lue systems
L max= 9 m**
24 m L max= 9 m**
24 m
L max= 10 m* L max= 10 m*
345
998 25 m 25 m
998
345
998
998
405
345
L max= 10 m* L max= 10 m* L max= 9 m**
25 m 25 m 24 m L max= 8 m***
23 m
LAS chimney
* L max Luna3 Avant+ = 4m ** L max Luna3 Avant+ = 3m *** L max Luna3 Avant+ = 2m
Tubes maximum length (m) Length reduction “Length reduction
Models for a 90° for a 45°
Ø 60/100 Ø 80/125 bend insertion (m) bend insertion (m)”
Luna Platinum+ / Luna Duo-tec+ / Duo-tec Max+
Duo-tec Compact+ 10 25
Nuvola Platinum+ / Nuvola Duo-tec+ 1 0,5
Prime 10 15
Luna3 Avant+ 4 -
Luna Platinum+, Luna Duo-tec+, Luna Platinum+ and Combi Duo-tec Compact+,
Duo-tec Max+ Luna Duo-tec+ and Combi Duo-tec Compact 124
177 140,5 177 338 238
131 min
131 min
131 min
condensing boilers
min.
119
263,8
466 600
Prime
1150
= = 120
= = 120
200
ø 60
ø 100
80
395 279
395 279 Vertical coaxial lue terminal
Ø 60/100 mm
frontal view side view frontal view side view KUG 71413581
77
Coaxial lue system
Luna3 Comfort - Luna3 Comfort + Combi - Luna3 - Ecofour - Eco5 Compact - Main5
L max
L max
L max L max
L max
L max
LAS chimney
345
998
998
998
345
998
345
405
Lmax can change according to the lue type and boiler models. See the instruction manual.
Tubes maximum length (m) Length reduction Length reduction
for a 90° for a 45°
Ø 60/100 Ø 80/125 bend insertion (m) bend insertion (m)
Horizontal Luna3 24/25 kW 5 9
lue Luna3 28/31 kW 4 8
Luna3 Blue 4 -
Ecofour - Eco Compact - Main5 5 - 1 0,5
Vertical Luna3 4 10
chimney Luna3 Blue 4 -
Ecofour - Eco Compact - Main5 5 -
100 122
100 188 398
114
143 min
143 min
frontal view side view frontal view side view frontal view side view
184
120
400 299
78
Technical drawings - graphs - lue systems
L max= 3 m
7m L max= 3 m
7m
L max= 3 m (320 Fi) L max= 2 m (320 Fi) L max= 3 m (320 Fi)
LAS chimney
998
998
345
998
998
345
405
345
L max= 4 m L max= 4 m L max= 3 m
10 m 10 m L max= 2 m
9m
8m
lue 32 kW 3 8 1 0,5
600 466 Vertical 4 10
chimney
Slim
LAS chimney
L max= 5 m L max= 4 m L max= 3 m
L max= 4 m L max= 3 m
L max= 3 m
L max= 3 m
998
998
998
998
345
345
405
345
L max= 3 m
L max= 3,5 m
L max= 4 m L max= 4 m
100
234 416
(m) (m)
234 116
5 1 0,5 60 - 100
above view side view above view side view
79
Dual lue system
Luna Platinum+, Luna Duo-tec+, Prime, Duo-tec Compact+, Luna3 Avant+, Duo-tec Max+,
Nuvola Platinum+, Nuvola Duo-tec+, Duo-tec Compact
L1 = INTAKE PIPE / L2 = FLUE PIPE
1150
1150
L1 L2
500
L1=30 m
500
(Ø 50)
L2=5 m
(Ø 80) L max = 15***
L max = 14***
L1 max = 30 m Ø 50* (L1 + L2) max = 80 m Ø80 * Prime: 30m Ø 50 mod. 24 kW, 20m Ø 50 mod. 24 kW
L2 max = 5 m Ø 80** L2 max = 15 m Ø80 ** Prime: 10m Ø 80
*** Luna3 Avant+: 10m
134
159
Nuvola Platinum+, Nuvola Duo-tec+ with adjustable dual lue kit Luna Platinum+ and Combi
Luna Duo-tec+ and Combi
110 120 110 181 110 120 110 338
110 89 110 191 94 181
188
148
159
156,5 177
450 540
600 466 600 466
frontal view side view frontal view side view frontal view side view
238
400 299 395 279
80
Technical drawings - graphs - lue systems
KHG71409351 KHG71409351
KHG71409361 KHG71409361
KHG71411121
KHG71410571 (1,5 m) KHG71410571 (1,5 m)
KHG71410621 KHG71410621
KHG71405921 KHG71405921
KHG71405991 KHG71405991
KHG71410591
KHG71405911 KHG71405911
Chimney terminal
for gas condensing boilers
Ø 126
Ø 81,5
50
130
Ø 60
Ø 100
1150
KHG 71409391
Reduction kit from Ø 80/125 to Ø 60/100
25
484
Ø 126
138
200
50
5 Ø 80
Ø 125 Ø 80
KHG 71409351 KHG 71409381
Coaxial vertical chimney Dual lue tubes adapter for coaxial
terminal Ø 80/125 chimney from Ø 80/80 to Ø 80/125
81
Dual lue system
Luna3 Comfort - Luna3 - Luna3 Comfort + Combi - Ecofour - Eco5 Compact - Main5
L1 L2
L2 Max m 10 10 8 10 8
*B22 - - - - -
1150
1150
500
500
L L
25 kW 31 kW 25 kW 31 kW
L Max m 15 12 15 8 9 L Max m 14 10 14 7
If the pipe length is longer than 6 meters the condensation collector kit must be installed.
Length reduction for a 90° bend insertion 0,5 m. Length reduction for a 45° bend insertion 0,25 m
94 94 94 94 188 94 94 94 94
398
143 min
143 min
143 min
frontal view frontal view side view frontal view frontal view side view
145
120
120
Front
view
= = = =
299
400 400
frontal view frontal view side view
frontal view side view
Main5
82
Technical drawings - graphs - lue systems
650
650
1150
1150
L
L
(L1 + L2) max= 30 m L max= 15 m L max= 15 m
(25 m - 320Fi)
94 94 153 120
Slim
1150
L1 L2 L1 L2
1150
500
500
L max=4,5 m
L max=5,5 m
Tubes Length Length Ø Flue Slim 1.230 Fi/FiN, 1.300 Fi/FiN Slim 2.300 Fi
maximum reduction for reduction for (mm)
length (m) a 90° bend a 45° bend 97 97
97 97
insertion (m) insertion (m)
Installation
with proof 20 0,5 0,25 80
terminal
101,5 min
101,5 min
119
Installation 234 416
with chimney 6 0,5 0,25 133 119
terminal
115 235
Ø 100
83
Collectors for forced natural draft installation
SB 25 + V SB 20 + V 0,9
0,8
SB25+O
SB 25 + O SB 20 + O 0,7
SB25+V
0,6
0,5
0,4
0,3
0,2
0,1
I (*)
0,9
0,8
0,7
0,6
SB20+V
0,5
h x w x d (mm) 0,4
SB20+O
0,3
SB 25 + V 2187 1147 87
0,2
SB 25 + O 1147 2187 87 0,1
SB 20 + V 1755 1148 87 0
SB 20 + O 1148 1755 87
I (*)
SB 21+ SB 21+
0,9
0,8
0,7
0,6
0,5
0,4
0,3
0,2
0,1
h x w x d (mm) 0
0.0 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 0.10
SB 21+ 1753 1147 87
I (*)
(*) I = total incidental radiation on the collector surface (W/m2) - tm = average temperature of the absorbing surface (°C) - ta = room temperature (°C)
s
phasing out products
Indirect cylinders
A Connection heating system C Mains water 1/2” M
LUNA UB INOX SLIM UB INOX low/indirect cylinder 3/4”M D Domestic hot water outlet 1/2” M
LUNA UB SLIM UB B Connection indirect cylinder E Relief valve 1/2” F
80, 120 80, 120 return/heating system 3/4” M F Recirculation 1/2” M
H
G G G = 45 mm (80 l)
120 mm (120 l)
H = 450 mm (80 l)
600 mm (120 l)
84
Technical drawings - graphs - lue systems
Indirect cylinders
UB SC
25
7 1
125 125
1 2 3 4 75 75 5 6 7
1 Thermometer - Sensor Ø 10 mm
2 Boiler return G 3/4” M
723 (mod. 120 SC)
923 (mod. 160 SC)
147
97
5 Cold water inlet G 1/2” M
6 Boiler low G 3/4” M
Ø 560
SC 7 Anode G 3/4”
SC Drain G 1/2”
200
40°
+ = B C A
1642
I F
E G
6
227.5
H
1016
954
915
37
Luna Platinum
602
1.12 GA - 1.18 GA - 1.24 GA - 1.32 GA models
+ =
A Heating system low G 3/4” M
95 132 62 65 95 B Heating system return G 3/4” M
C Gas inlet G 3/4” M
E Mains water G 1/2” M
85
145
153 120
Luna Duo-tec
273 177
1.12 GA - 1.24 GA - 1.28 GA models
+ =
C Gas inlet G 3/4” M
E Mains water G 1/2” M
F DHW outlet G 1/2” M
G DHW recirculation G 1/2” M
I DHW relief valve outlet
85
Indirect cylinders
1 Domestic hot water outlet G1 7 Solar exchanger inlet G1
UBVT 200 DC/SC 2 Recirculation G¾ 8 Solar exchanger outlet G1
UBVT 300 DC/SC 3
4
Exchanger inlet G1
Domestic hot water sensor G1
9
10
Solar sensor positioning
Electrical resistance seat G1 1/2”
UBVT 400 DC/SC 5 Exchanger outlet G1 11 Magnesium anode Ø 33 mm
6 Domestic cold water inlet 12 Thermometer
UBVT 500 DC + Drain opening G1
200 SC - 300 SC - 400 SC 200 DC - 300 DC - 400 DC - 500 DC UBVT UBVT UBVT UBVT
11 I
I
200 DC 300 DC 400 DC 500 DC
UBVT UBVT UBVT
1
200 SC 300 SC 400 SC A 287 286 304 302,6
12 1
H
H
G
G
F
E
E
9 9
D
G 1323.5 1694 1560 F 1170 1487 1309 1448
B
B
8
8 H 1422.5 1795.5 1671.5 G 1323,5 1694 1560 1665,7
A
A
C
C
UB 200 SOLAR
86
Technical drawings - graphs - lue systems
Indirect cylinders
UB 800 DC 2
UB 1500 DC 1 3
Dimensions
UB 2000 DC 11
A mm 935 1085 1200 1340
7
B mm 1465 1720 1770 2000
10
9 4 E mm 435 440 500 550
8
H
F mm 210 210 260 260
N B
M G mm 335 350 385 400
L 7
J I mm 875 985 1095 1205
K A
I
6
J mm 1055 1245 1275 1425
O 5
E K mm 965 1120 1185 1315
G
F
L mm 1180 1395 1370 1485
9
D M mm 1365 1560 1680 1870
d
1 DHW outlet 1” 1/4 N mm 1455 1700 1820 1990
2 Anode 1” 1/2 O mm 535 510 495 660
3 Thermometer 1/2”
30°±5
120
°
UB 1000 SC 2
Dimensions
9
A mm 440 550
7 4
B mm 1720 2000
8
C mm 1350 1540
E mm 210 260
H F mm 350 520
K B
J G mm 555 730
C
I 7
I mm 1395 1600
L
6 J mm 1535 1750
G K mm 1700 1990
A
F
E 5 L mm 1235 1430
M mm 200 230
D
1 DHW outlet 1” 1/4 d d mm 790 1100
2 Anode 1” 1/2 Heigth (including
3 Thermometer 1/2” 3515 (40mm FLANGIA COLLARINO DIRITTO) mm 2105 2470
insulation)
4 Electric resistance 1” 1/2
H mm 2030 2405
5 Cold water inlet 1” 1/4
300150
87
Indirect cylinders
UBPU 50
1
UBPU 100 2
2
4
UBPU 300
UBPU 500
8
8 6
5
D
F d
H
A 3 E
3
30°±5
5
°
7
90
C C
°±
5°
B
UBPU 25
D 1
2
d 2 4
6
3 3
30°
40 5
F
E
C
5
B
120
°
7
Model UBPU 25 UBPU 50 UBPU 100 UBPU 300 UBPU 500 UBPU 25 UBPU 50 UBPU 100 UBPU 300 UBPU 500
UBPU 500 SC 1
UBPU 800 SC 2
2 9
Model UBPU 500 SC UBPU 800 SC UBPU 1500 SC
UBPU 1500 SC
2
5 Dimensions
2 8
H 3-4
3-4
8
B mm 330 335 390
K
G mm 930 1045 1290
I
8
3
G 3
I mm 1090 1095 1310
A
88
Technical drawings - graphs - lue systems
Indirect cylinders
UBTT 300 Cold water inlet 1”
Anode1”1/4
Sensor 1/2”
Recirculation 1”
DHW outlet 1” Dump1/2”
350
600
Solar circuit flow 3/4”
1315
Sensor 1/2”
300
B
700
120
Ø360
780
120
420
450
Ø545
C
225
UBPT 1000 1
2
Dump 1”
Boiler low 1 1/2”
12
13
Low temperature heating zone return 1 1/2”
Cold water inlet 1 1/4”
3 Thermometer 1/2” 14 Solar circuit return 1”
4 Sensor 1/2” 15 Sensor 1/2”
5 Heating circuit low 1 1/2” 16 Solar circuit low 1”
6 High temperature heating zone return 1 1/2” 17 Electric resistance 1 1/2”
7 Boiler return 1 1/2” 18 Generator return 1”
8 Generator low 1 1/2” 19 Sensor 1/2”
9 Sensor 1/2” 20 Generetor low 1 1/2”
10 Sensor 1/2” 21 DHW outlet 1”
11 Generator return 1 1/2”
UBPT 1000
Capacity (DHW) lt 48
89
Electric water heaters
10-15 lt, ABOVE AND UNDER SINK
under sink
Capacity E F G I J
R 501 SL 10 262 - 184 - -
R 501 10 262 - 184 - -
R 515 SL 15 345 - 184 - -
R 515 15 345 - 184 - -
above sink
dimensions (mm)
90
Technical drawings - graphs - lue systems
Capacity A/H Ø B C D
V 530 30 623 338 - 423 86
V 550 50 610 433 - 380 451
V 580 80 857 433 - 585 451
V 510 100 1019 433 - 785 451
O 580 80 832 433 - 395 451
O 510 100 994 433 - 555 451
upright 30/50/80/100 lt
V 580 TD 80 857 433 - 585 451
V 510 TD 100 1019 433 - 785 451
V 580 TS 80 857 433 - 585 451
V 510 TS 100 1019 433 - 785 451
Capacity E F G I J
V 530 30 350 100/320 240/272 - -
V 550 50 165 100/320 240/272 - -
V 580 80 165 100/320 240/272 - -
V 510 100 165 100/320 240/272 - -
O 580 80 234 365 240/272 - -
O 510 100 234 365 240/272
V 580 TD 80 165 100/320 240/272 251 206
V 510 TD 100 165 100/320 240/272 251 206
V 580 TS 80 165 100/320 240/272 251 206
V 510 TS 100 165 100/320 240/272 251 206
dimensions (mm)
91
Technical drawings - graphs - lue systems
H
h1 mm 340 325 325
L mm 116 116 116
DF mm 80 80 80
Uscitainlet
Water H2OH2O
1/2” 1/2”
Entrata
Water H2OH2O
outlet
120
Anodi in lega
Magnesium
di magnesioanodes
AZ63 MODEL SAG3 115 T SAG3 150 T SAG3 190 T
D mm 490 490 490
H mm 1150 1400 1650
h1 mm 1105 1355 1605
hi
H
Ricircolo 3/4”
Recirculation 3/4”
F
Scarico 1”
Discharge 1”
SAG3 300 T
ry D
DF
Magnesium
Anodi in lega di magnesioanodes
AZ63 Uscitaoutlet
Water H2O H2O
Fitting 2”
Manicotto 2” MODEL SAG3 300 T
Ø1
Ricircolo
Recirculation D mm 650
H mm 1685
h1 mm 1660
i mm 140
DF mm 120
H
i
h1
Ø1
Ø1
Entrata
Water H2O
inlet H2O
Scarico
Discharge
92
Technical drawings - graphs - lue systems
B
690
A
2 1460
7
1 3
3
4(1) 90
2 50°
600
93
Technical drawings - graphs - lue systems
690
2000 2
1375
1 3 4 5 6 7
5 4
658
6
3 300
4(1) 90
2
600
3 Specifiche tecniche
Fig.3
SPCDimensioni
180 ECO e connessioni
D
F Altezza apertura di scarico dei condensati mm 1308
6
3
7
4
C
E
Other accessories
- Replacement kit 102
- Installation templates 102
- Solar integration 102
95
Flue pipe accessories
Coaxial lue system for GAS CONDENSING BOILERS
Description Code
PP coaxial lue pipe extension with checking proile - Ø 60/100 L=310 mm KHG 71411951
PP coaxial lue pipe extension with checking proile - Ø 80/125 L=245 mm KA00054
Flat roof tile to be used with a vertical chimney terminal Ø 80/125 KHG 71409361
*+KHG 71409391
96
Flue pipe accessories
Coaxial lue system for FANNED FLUE GAS BOILERS
Description Code
Coaxial lue tube extension Ø 60/100 with checking proile L=330 mm KHG 71410401
Starting coaxial 90° bend Ø 60/100 with checking proile KHG 71410411
Coaxial 90° bend Ø 60/100 with checking proile - additional KHG 71413661
Coaxial reduction kit Ø 80/125 - Ø 60/100 with draining trap KHG 71410201
Coaxial condensate collector kit Ø 60/100 (it replaces KHG 714087710) KHG 71411971
Vertical chimney terminal for coaxial lue system Ø 60/100 KHG 71403641
97
Flue pipe accessories
Dual lue system FOR GAS CONDENSING BOILERS
Description Code
Dual lue pipes adapter for coaxial chimney from Ø 80/80 to Ø 80/125 KHG 71409381
Flat roof tile Ø 125 to be used with a vertical chimney terminal KHG 71409361
Description Code
99
Flue pipe accessories
Dual lue system for FANNED FLUE GAS BOILERS
Description Code
Description Code
PP 90° bend Ø 80 with supporting bracket and condensate drainings KHG 71410591
Flexible ducting system Ø 50 for Prime and CONDENSING BOILERS (24 kW)
Description Code
100
Flue pipe accessories
Flue system for Prime
Description Code
Spacer 40 mm KA00069
Description Code
Vertical coaxial lue terminal Ø 60/100 for gas boilers KUG 71413571
Vertical coaxial lue terminal Ø 60/100 for condensing boiler KUG 71413581
Vertical coaxial lue terminal Ø 80/125 for condensing boiler KUG 71413591
101
Platinum+ includes: Luna Platinum+, Nuvola Platinum+;
Other accessories: Duo-tec+ includes: Luna Duo-tec+, Duo-tec Compact+, Duo-tec Max+, Nuvola Duo-tec+, Duo-tec Compact
replacement kits Luna3+ includes: Luna3 Avant+, Luna3+, Luna3 Blue+, Luna3 Comfort, Luna3
Nuvola3 BS
Universal replacement kit 7111199 Nuvola3+
Luna Platinum+,
Metal template for 7109786 Luna Duo-tec+,
Platinum+/Duo-tec+
Duo-tec Max+
Duo-tec
Metal template for Compact+
7109787
Duo-tec Compact Duo-tec
Compact
Metal template for
Luna3+ KHG 71406201 •
fanned lue models
Ecofour Nuvola3 BS 40
Description Code Platinum+ Prime Luna3+ Eco5 Compact Nuvola3
Duo-tec+
Main5 Nuvola3+ Comfort
Luna
Platinum+,
Luna Duo-tec+,
7115139
Duo-tec Compact+, •
Duo-tec Max+
Solar valve kit Duo-tec Compact
Luna3 Avant+,
Luna3+,
KHG 71412311
Luna3 Comfort,
Luna3
Solar valve kit
102
Platinum+ includes: Luna Platinum+, Nuvola Platinum+;
Hydraulic accessories Duo-tec+ includes: Luna Duo-tec+, Duo-tec Compact+, Duo-tec Max+, Nuvola Duo-tec+, Duo-tec Compact
Luna3+ includes: Luna3+, Luna3 Blue+, Luna3 Comfort, Luna3
Ecofour Nuvola3 BS 40
Platinum+ Slim
Description Code Duo-tec+ Prime Luna3+ Slim HPS Eco5 Compact Nuvola3
Main5 Comfort
Eco5 Compact
7109314 • Main5
Heating systems taps
with ilter
Eco5 Compact
7106980 Duo-tec+ • Main5
Telescopic connection pipes with
gas and mains water valves
KHG 71411071 •
Hydraulic connection kit for
combi boiler
KHG 71410701 •
Hydraulic connection kit for
heating only boiler
KHG 71411081 •
Hydraulic connection kit with
heating valves
Nuvola3 BS40
7107388
Nuvola3+
Telescopic connection pipes
•
Excluding
KHG 71402331 Nuvola • + KHG 71402891
Vertical tube connection kit: it includes Platinum+
5 tubes for vertical connection Nuvola Duo-tec+
KHG71402191 • Ecofour
Slim
KHG 71405261*
(combi boilers)
Mains water valve without
ilter *
KHG71402461 • Ecofour
Heating system low/return valve
with ilter
Slim
(combi boilers) Nuvola3
KHG 71402201*
+ 1.260 - 1.300 Comfort
Heating system low/return
valve without ilter * Fi/Fin models
KHG 71402161 •
Expansion vessel (10 lt)
* To be used for Slim of connected with female/female adapter available on the market.
103
Platinum+ includes: Luna Platinum+, Nuvola Platinum+;
Hydraulic accessories Duo-tec+ includes: Luna Duo-tec+, Duo-tec Compact+, Duo-tec Max+, Nuvola Duo-tec+, Duo-tec Compact
Luna3+ includes: Luna3 Avant+, Luna3+, Luna3 Blue+, Luna3 Comfort, Luna3,
Nuvola3 BS 40
Platinum+ Slim Ecofour Nuvola3
Description Code Prime Luna3+ Eco5 Compact
Duo-tec+ Slim HPS Main5 Comfort
Nuvola3+
Nuvola
KHG 71407971
Duo-tec+
Additional expansion
vessel (2 lt)
Comfort
KSL 71408611
Combi
Combi additional expansion
vessel (4 lt)
KHG 71402291 •
Flow restrictor 8 l/mins
Nuvola
Platinum+, Nuvola3
KHG 71402271
Nuvola Comfort
Recirculating kit
Duo-tec+
Luna3 Comfort
KHG 71410661 - heating
only models
3 way valve motor
Luna3 Comfort
KFG 71411191 - heating
3 way valve motor and hot only models
water temperature sensor*
Heating
KHG 71409631
only
Electric 3 way kit for
external connection
Luna3 Comfort,
KHG 71402481 Luna3,
Upper cover for (24 kW)
open lue models
KHG 71407341 •
Upper cover for
fanned lue models
104
Thermoregulation accessories for Luna Platinum+, Nuvola Platinum+
(the accessories dedicated to Platinum+ cannot be used for Duo-tec+ boilers)
Description Code
* wireless model to be ordered with the interface kit for remote control THINK - 5 leds (7102441) when the remote control is installed on the wall, or with the wireless aerial (7102343)
when the remote control is installed in the boiler control panel
105
Thermoregulation accessories for Luna Platinum+, Nuvola Platinum+
(the accessories dedicated to Platinum+ cannot be used for Duo-tec+ boilers)
Description Code
Description Code
Modulating thermostat
7104347
(ONLY FOR DUO-TEC BOILERS)
106
Thermoregulation accessories
Ecofour Nuvola3 BS 40
Slim Nuvola3
Description Code Prime Luna3+ Slim HPS Eco5 Compact Comfort
Main5
Nuvola3+
7104873 •
Outdoor sensor
Luna3, Nuvola3
KHG 71410641
Luna3 Blue BS 40
Remote controller and climatic regulator
KHG 71411471 • •
Remote controller and climatic regulator wireless
Eco5 Compact
KHG 71410051
Main5
PCB for remote alarm signal
KHG 71410651 • •
PCB interface for zone control
Luna3 Comfort
KHG 71406191
- heating only
Hot water temperature sensor
107
Platinum+ includes: Luna Platinum+, Nuvola Platinum+;
Mixing systems accessories Duo-tec+ includes: Luna Duo-tec+, Duo-tec Compact+, Duo-tec Max+, Nuvola Duo-tec+, Duo-tec Compact
(Dimensions mm hxwxd: 600x450x210; Luna3+ includes: Luna3 Avant+, Luna3+, Luna3 Blue+, Luna3 Comfort, Luna3
MS models- hxwxd: 700x450x210)
Ecofour Nuvola3 BS 40
Platinum+ Slim
Description Code Duo-tec+ Prime Luna3+ Slim HPS Eco5 Compact Nuvola3
Main5 Comfort
Mixing system
kit “MS IN” THINK
(1 HT zone 7222368 Platinum+
- 2 LT zones)
Mixing system
kit “MS IN” THINK
(1 HT zone 7222367 Platinum+
- 1 LT zone)
Universal mixing
system kit “MS IN”:
Universal mixing
system kit “MS IN”
(1 HT zone 7225039 • • • Slim up to 30 kW • •
- 1 LT zone)
Universal mixing
system kit “MS IN”
(1 HT zone 7225038 • • • Slim up to 30 kW • •
- 2 LT zones)
108
Platinum+ includes: Luna Platinum+, Nuvola Platinum+;
Other accessories Duo-tec+ includes: Luna Duo-tec+, Duo-tec Compact+, Duo-tec Max+, Nuvola Duo-tec+, Duo-tec Compact
Luna3+ includes: Luna3 Avant+, Luna3+, Luna3 Blue+, Luna3 Comfort, Luna3
KHG 71407381 •
Bottom cover
KHG 71402301 • • • • • •
Polyphosphate
batcher
KHG 71402431 • • • • • •
Polyphosphate
recharge (pack of 4)
Luna3
KHG 71412561 • • Avant+
Luna3
7213162 • • Avant+
109
Accessories for Slim
Description Code
KHG 71408541 • •
UB Inox additional expansion vessel (4 litres)
KSL 71408611 •
Combi additional expansion vessel (4 lt)
For connection of
KHG 71410661
Luna3 boilers
3 way valve motor
For connection of
Luna3 boilers
KFG 71411191 (heating only) to tanks
not supplied by Baxi and
3 way valve motor and hot water temperature sensor to UB 120 - 160 SC
KHG 71409631 •
Electric 3 way kit for external connection
KHW 71408561 •
Connection pump kit
KHW 71409681 •
Connection kit to indirect cylinder for boilers > 35 kW
KSG 71408821 • •
Metal template UB Inox 80-120
KSL71411051 •
Combi 80 L connection kit
110
Notes
111
Notes
112
Notes
113
Notes
114
Quality
Environment
Safety
Quality
Environment 36061 BASSANO DEL GRAPPA (VI) - ITALY
Via Trozzetti, 20
Safety marketing@baxi.it
www.baxi.it
are Baxi strategic aims and
the awarded certiications The Company assumes no responsibility for any possible contents mistakes, and reserves the right to make changes in products, due to technical
ensure compliance with the or commercial demands, at any time without notice.